imx6: Add 4.3 support

Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48008

9 files changed, 960 insertions, 0 deletions

diff --git a/target/linux/imx6/patches-4.3/035-ARM-dts-imx-ventana-set-GW54xx-PMIC-swbst-regulator-.patch b/target/linux/imx6/patches-4.3/035-ARM-dts-imx-ventana-set-GW54xx-PMIC-swbst-regulator-.patch
new file mode 100644
index 0000000000..a92e0f8960
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/035-ARM-dts-imx-ventana-set-GW54xx-PMIC-swbst-regulator-.patch
@@ -0,0 +1,28 @@
+From 57b82d9e79d77442bae3d2c13b98ceccb39fe5e2 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 5 Nov 2015 10:49:31 -0800
+Subject: [PATCH 1/3] ARM: dts: imx: ventana: set GW54xx PMIC swbst regulator
+ as always-on
+
+The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver
+and HDMI DDC and is enabled by the bootloader. Set the regulator to
+always-on so that Linux doesn't turn it off thinking its not needed.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:37.000000000 -0800
+@@ -260,6 +260,8 @@
+ 			swbst_reg: swbst {
+ 				regulator-min-microvolt = <5000000>;
+ 				regulator-max-microvolt = <5150000>;
++				regulator-boot-on;
++				regulator-always-on;
+ 			};
+ 
+ 			snvs_reg: vsnvs {
diff --git a/target/linux/imx6/patches-4.3/036-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch b/target/linux/imx6/patches-4.3/036-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch
new file mode 100644
index 0000000000..2768b0906e
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/036-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch
@@ -0,0 +1,37 @@
+From 473d0353979db3673a7aa365265ba9b00decd414 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 5 Nov 2015 10:52:53 -0800
+Subject: [PATCH 2/3] ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channel
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
+ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+@@ -247,7 +247,7 @@
+ &ldb {
+ 	status = "okay";
+ 
+-	lvds-channel@1 {
++	lvds-channel@0 {
+ 		fsl,data-mapping = "spwg";
+ 		fsl,data-width = <18>;
+ 		status = "okay";
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.855158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+@@ -338,7 +338,7 @@
+ &ldb {
+ 	status = "okay";
+ 
+-	lvds-channel@1 {
++	lvds-channel@0 {
+ 		fsl,data-mapping = "spwg";
+ 		fsl,data-width = <18>;
+ 		status = "okay";
diff --git a/target/linux/imx6/patches-4.3/037-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch b/target/linux/imx6/patches-4.3/037-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch
new file mode 100644
index 0000000000..768648e5e4
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/037-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch
@@ -0,0 +1,76 @@
+From d86b202436b6f3111c4c37b8701daa0764d2ca55 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 5 Nov 2015 11:10:00 -0800
+Subject: [PATCH 3/3] ARM: dts: imx: ventana: Allow HDMI and LVDS to work
+ simultaneously
+
+Currently it is not possible to have HDMI and LVDS working simultaneously,
+because both ports try to use PLL5.
+
+Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
+driven from independent sources.
+
+With this change the LDB pixel clock goes to 68.57 MHz, which is still
+within the valid range for the displays supported by the Ventana boards.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 7 +++++++
+ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 7 +++++++
+ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 7 +++++++
+ 3 files changed, 21 insertions(+)
+
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+@@ -151,6 +151,13 @@
+ 	status = "okay";
+ };
+ 
++&clks {
++	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
++	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
++	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
++	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
++};
++
+ &fec {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_enet>;
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.867158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+@@ -152,6 +152,13 @@
+ 	status = "okay";
+ };
+ 
++&clks {
++	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
++	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
++	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
++	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
++};
++
+ &fec {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_enet>;
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.871158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+@@ -142,6 +142,13 @@
+ 	status = "okay";
+ };
+ 
++&clks {
++	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
++	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
++	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
++	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
++};
++
+ &fec {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_enet>;
diff --git a/target/linux/imx6/patches-4.3/100-bootargs.patch b/target/linux/imx6/patches-4.3/100-bootargs.patch
new file mode 100644
index 0000000000..3c22ec780e
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/100-bootargs.patch
@@ -0,0 +1,13 @@
+Index: linux-4.3/arch/arm/boot/dts/imx6dl-wandboard.dts
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6dl-wandboard.dts	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6dl-wandboard.dts	2015-12-18 10:39:44.923158318 -0800
+@@ -19,4 +19,8 @@
+ 	memory {
+ 		reg = <0x10000000 0x40000000>;
+ 	};
++
++	chosen {
++		bootargs = "console=ttymxc0,115200";
++	};
+ };
diff --git a/target/linux/imx6/patches-4.3/202-net-igb-add-i210-i211-support-for-phy-read-write.patch b/target/linux/imx6/patches-4.3/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
new file mode 100644
index 0000000000..6a636a3e9d
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/202-net-igb-add-i210-i211-support-for-phy-read-write.patch
@@ -0,0 +1,131 @@
+Author: Tim Harvey <tharvey@gateworks.com>
+Date:   Thu May 15 00:12:26 2014 -0700
+
+    net: igb: add i210/i211 support for phy read/write
+    
+    The i210/i211 uses the MDICNFG register for the phy address instead of the
+    MDIC register.
+    
+    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:43:28.000000000 -0800
+@@ -129,7 +129,7 @@
+ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+ {
+ 	struct e1000_phy_info *phy = &hw->phy;
+-	u32 i, mdic = 0;
++	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+ 	if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -142,11 +142,25 @@
+ 	 * Control register.  The MAC will take care of interfacing with the
+ 	 * PHY to retrieve the desired data.
+ 	 */
+-	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+-		(E1000_MDIC_OP_READ));
++	switch (hw->mac.type) {
++	case e1000_i210:
++	case e1000_i211:
++		mdicnfg = rd32(E1000_MDICNFG);
++		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++		wr32(E1000_MDICNFG, mdicnfg);
++		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++			(E1000_MDIC_OP_READ));
++		break;
++	default:
++		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
++			(phy->addr << E1000_MDIC_PHY_SHIFT) |
++			(E1000_MDIC_OP_READ));
++		break;
++	}
+ 
+ 	wr32(E1000_MDIC, mdic);
++	wrfl();
+ 
+ 	/* Poll the ready bit to see if the MDI read completed
+ 	 * Increasing the time out as testing showed failures with
+@@ -171,6 +185,18 @@
+ 	*data = (u16) mdic;
+ 
+ out:
++	switch (hw->mac.type) {
++		/* restore MDICNFG to have phy's addr */
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			break;
++		default:
++			break;
++	}
+ 	return ret_val;
+ }
+ 
+@@ -185,7 +211,7 @@
+ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+ {
+ 	struct e1000_phy_info *phy = &hw->phy;
+-	u32 i, mdic = 0;
++	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+ 	if (offset > MAX_PHY_REG_ADDRESS) {
+@@ -198,12 +224,27 @@
+ 	 * Control register.  The MAC will take care of interfacing with the
+ 	 * PHY to retrieve the desired data.
+ 	 */
+-	mdic = (((u32)data) |
+-		(offset << E1000_MDIC_REG_SHIFT) |
+-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
+-		(E1000_MDIC_OP_WRITE));
++	switch (hw->mac.type) {
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			mdic = (((u32)data) |
++				(offset << E1000_MDIC_REG_SHIFT) |
++				(E1000_MDIC_OP_WRITE));
++			break;
++		default:
++			mdic = (((u32)data) |
++				(offset << E1000_MDIC_REG_SHIFT) |
++				(phy->addr << E1000_MDIC_PHY_SHIFT) |
++				(E1000_MDIC_OP_WRITE));
++			break;
++	}
+ 
+ 	wr32(E1000_MDIC, mdic);
++	wrfl();
+ 
+ 	/* Poll the ready bit to see if the MDI read completed
+ 	 * Increasing the time out as testing showed failures with
+@@ -227,6 +268,18 @@
+ 	}
+ 
+ out:
++	switch (hw->mac.type) {
++		/* restore MDICNFG to have phy's addr */
++		case e1000_i210:
++		case e1000_i211:
++			mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
++			mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
++			wr32(E1000_MDICNFG, mdicnfg);
++			break;
++		default:
++			break;
++	}
+ 	return ret_val;
+ }
+ 
diff --git a/target/linux/imx6/patches-4.3/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-4.3/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
new file mode 100644
index 0000000000..4bb691d36b
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
@@ -0,0 +1,266 @@
+From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 15 May 2014 00:29:18 -0700
+Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
+
+Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
+The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
+to this function.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/net/ethernet/intel/igb/e1000_82575.c |  4 +-
+ drivers/net/ethernet/intel/igb/e1000_phy.c   | 74 +++++++++++++++++++---------
+ drivers/net/ethernet/intel/igb/e1000_phy.h   |  6 ++-
+ 3 files changed, 58 insertions(+), 26 deletions(-)
+
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:43:28.000000000 -0800
+@@ -2153,7 +2153,7 @@
+ 	if (ret_val)
+ 		goto out;
+ 
+-	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++	ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+ 
+ 	hw->phy.ops.release(hw);
+ 
+@@ -2178,7 +2178,7 @@
+ 	if (ret_val)
+ 		goto out;
+ 
+-	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++	ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+ 
+ 	hw->phy.ops.release(hw);
+ 
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:39:44.931158318 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:39:44.939158318 -0800
+@@ -126,9 +126,8 @@
+  *  Reads the MDI control regsiter in the PHY at offset and stores the
+  *  information read to data.
+  **/
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+-	struct e1000_phy_info *phy = &hw->phy;
+ 	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+@@ -147,14 +146,14 @@
+ 	case e1000_i211:
+ 		mdicnfg = rd32(E1000_MDICNFG);
+ 		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+-		mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++		mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ 		wr32(E1000_MDICNFG, mdicnfg);
+ 		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ 			(E1000_MDIC_OP_READ));
+ 		break;
+ 	default:
+ 		mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+-			(phy->addr << E1000_MDIC_PHY_SHIFT) |
++			(addr << E1000_MDIC_PHY_SHIFT) |
+ 			(E1000_MDIC_OP_READ));
+ 		break;
+ 	}
+@@ -208,9 +207,8 @@
+  *
+  *  Writes data to MDI control register in the PHY at offset.
+  **/
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+-	struct e1000_phy_info *phy = &hw->phy;
+ 	u32 i, mdicnfg, mdic = 0;
+ 	s32 ret_val = 0;
+ 
+@@ -229,7 +227,7 @@
+ 		case e1000_i211:
+ 			mdicnfg = rd32(E1000_MDICNFG);
+ 			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+-			mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++			mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+ 			wr32(E1000_MDICNFG, mdicnfg);
+ 			mdic = (((u32)data) |
+ 				(offset << E1000_MDIC_REG_SHIFT) |
+@@ -238,7 +236,7 @@
+ 		default:
+ 			mdic = (((u32)data) |
+ 				(offset << E1000_MDIC_REG_SHIFT) |
+-				(phy->addr << E1000_MDIC_PHY_SHIFT) |
++				(addr << E1000_MDIC_PHY_SHIFT) |
+ 				(E1000_MDIC_OP_WRITE));
+ 			break;
+ 	}
+@@ -458,7 +456,7 @@
+ 		goto out;
+ 
+ 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+-		ret_val = igb_write_phy_reg_mdic(hw,
++		ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ 						 IGP01E1000_PHY_PAGE_SELECT,
+ 						 (u16)offset);
+ 		if (ret_val) {
+@@ -467,8 +465,8 @@
+ 		}
+ 	}
+ 
+-	ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+-					data);
++	ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
++					MAX_PHY_REG_ADDRESS & offset, data);
+ 
+ 	hw->phy.ops.release(hw);
+ 
+@@ -497,7 +495,7 @@
+ 		goto out;
+ 
+ 	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+-		ret_val = igb_write_phy_reg_mdic(hw,
++		ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+ 						 IGP01E1000_PHY_PAGE_SELECT,
+ 						 (u16)offset);
+ 		if (ret_val) {
+@@ -506,8 +504,8 @@
+ 		}
+ 	}
+ 
+-	ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+-					 data);
++	ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
++					 MAX_PHY_REG_ADDRESS & offset, data);
+ 
+ 	hw->phy.ops.release(hw);
+ 
+@@ -2547,8 +2545,9 @@
+ }
+ 
+ /**
+- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
++ *  igb_write_reg_gs40g - Write GS40G PHY register
+  *  @hw: pointer to the HW structure
++ *  @addr: phy address to write to
+  *  @offset: lower half is register offset to write to
+  *     upper half is page to use.
+  *  @data: data to write at register offset
+@@ -2556,7 +2555,7 @@
+  *  Acquires semaphore, if necessary, then writes the data to PHY register
+  *  at the offset.  Release any acquired semaphores before exiting.
+  **/
+-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+ 	s32 ret_val;
+ 	u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2566,10 +2565,10 @@
+ 	if (ret_val)
+ 		return ret_val;
+ 
+-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++	ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ 	if (ret_val)
+ 		goto release;
+-	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++	ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
+ 
+ release:
+ 	hw->phy.ops.release(hw);
+@@ -2577,8 +2576,24 @@
+ }
+ 
+ /**
+- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
++ *  igb_write_phy_reg_gs40g - Write GS40G PHY register
++ *  @hw: pointer to the HW structure
++ *  @offset: lower half is register offset to write to
++ *     upper half is page to use.
++ *  @data: data to write at register offset
++ *
++ *  Acquires semaphore, if necessary, then writes the data to PHY register
++ *  at the offset.  Release any acquired semaphores before exiting.
++ **/
++s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++{
++	return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
++ *  igb_read_reg_gs40g - Read GS40G  PHY register
+  *  @hw: pointer to the HW structure
++ *  @addr: phy address to read from
+  *  @offset: lower half is register offset to read to
+  *     upper half is page to use.
+  *  @data: data to read at register offset
+@@ -2586,7 +2601,7 @@
+  *  Acquires semaphore, if necessary, then reads the data in the PHY register
+  *  at the offset.  Release any acquired semaphores before exiting.
+  **/
+-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+ 	s32 ret_val;
+ 	u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2596,10 +2611,10 @@
+ 	if (ret_val)
+ 		return ret_val;
+ 
+-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++	ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+ 	if (ret_val)
+ 		goto release;
+-	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++	ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
+ 
+ release:
+ 	hw->phy.ops.release(hw);
+@@ -2607,6 +2622,21 @@
+ }
+ 
+ /**
++ *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
++ *  @hw: pointer to the HW structure
++ *  @offset: lower half is register offset to read to
++ *     upper half is page to use.
++ *  @data: data to read at register offset
++ *
++ *  Acquires semaphore, if necessary, then reads the data in the PHY register
++ *  at the offset.  Release any acquired semaphores before exiting.
++ **/
++s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++	return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
+  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
+  *  @hw: pointer to the HW structure
+  *
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.h
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.h	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.h	2015-12-18 10:39:44.939158318 -0800
+@@ -62,8 +62,8 @@
+ void igb_power_down_phy_copper(struct e1000_hw *hw);
+ s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
+ s32  igb_initialize_M88E1512_phy(struct e1000_hw *hw);
+-s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+-s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+ s32  igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+@@ -73,6 +73,8 @@
+ s32  igb_get_cable_length_82580(struct e1000_hw *hw);
+ s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
++s32  igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32  igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32  igb_check_polarity_m88(struct e1000_hw *hw);
+ 
+ /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-4.3/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-4.3/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
new file mode 100644
index 0000000000..4bee4ac686
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
@@ -0,0 +1,314 @@
+From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 15 May 2014 12:36:23 -0700
+Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
+
+If an i210 is configured for 1000BASE-BX link_mode and has an external phy
+specified, then register an mii bus using the external phy address as
+a mask.
+
+An i210 hooked to an external standard phy will be configured with a link_mo
+of SGMII in which case phy ops will be configured and used internall in the
+igb driver for link status. However, in certain cases one might be using a
+backplane SerDes connection to something that talks on the mdio bus but is
+not a standard phy, such as a switch. In this case by registering an mdio
+bus a phy driver can manage the device.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/net/ethernet/intel/igb/e1000_82575.c |  15 +++
+ drivers/net/ethernet/intel/igb/e1000_hw.h    |   7 ++
+ drivers/net/ethernet/intel/igb/igb_main.c    | 168 ++++++++++++++++++++++++++-
+ 3 files changed, 185 insertions(+), 5 deletions(-)
+
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:39:44.935158318 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:39:44.943158318 -0800
+@@ -612,13 +612,25 @@
+ 	switch (link_mode) {
+ 	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ 		hw->phy.media_type = e1000_media_type_internal_serdes;
++		if (igb_sgmii_uses_mdio_82575(hw)) {
++			u32 mdicnfg = rd32(E1000_MDICNFG);
++			mdicnfg &= E1000_MDICNFG_PHY_MASK;
++			hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
++			hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
++			       hw->phy.addr);
++		} else {
++			hw_dbg("1000BASE_KX");
++		}
+ 		break;
+ 	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ 		/* Get phy control interface type set (MDIO vs. I2C)*/
+ 		if (igb_sgmii_uses_mdio_82575(hw)) {
+ 			hw->phy.media_type = e1000_media_type_copper;
+ 			dev_spec->sgmii_active = true;
++			hw_dbg("SGMII with external MDIO PHY");
+ 			break;
++		} else {
++			hw_dbg("SGMII with external I2C PHY");
+ 		}
+ 		/* fall through for I2C based SGMII */
+ 	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+@@ -635,8 +647,11 @@
+ 				hw->phy.media_type = e1000_media_type_copper;
+ 				dev_spec->sgmii_active = true;
+ 			}
++			hw_dbg("SERDES with external SFP");
+ 
+ 			break;
++		} else {
++			hw_dbg("SERDES");
+ 		}
+ 
+ 		/* do not change link mode for 100BaseFX */
+Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_hw.h	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h	2015-12-18 10:39:44.943158318 -0800
+@@ -27,6 +27,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/netdevice.h>
++#include <linux/phy.h>
+ 
+ #include "e1000_regs.h"
+ #include "e1000_defines.h"
+@@ -543,6 +544,12 @@
+ 	struct e1000_mbx_info mbx;
+ 	struct e1000_host_mng_dhcp_cookie mng_cookie;
+ 
++#ifdef CONFIG_PHYLIB
++	/* Phylib and MDIO interface */
++	struct mii_bus *mii_bus;
++	struct phy_device *phy_dev;
++	phy_interface_t phy_interface;
++#endif
+ 	union {
+ 		struct e1000_dev_spec_82575	_82575;
+ 	} dev_spec;
+Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/intel/igb/igb_main.c	2015-12-18 10:39:44.407158315 -0800
++++ linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c	2015-12-18 10:39:44.943158318 -0800
+@@ -41,6 +41,7 @@
+ #include <linux/if_vlan.h>
+ #include <linux/pci.h>
+ #include <linux/pci-aspm.h>
++#include <linux/phy.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/ip.h>
+@@ -2223,6 +2224,126 @@
+ 	return status;
+ }
+ 
++
++#ifdef CONFIG_PHYLIB
++/*
++ * MMIO/PHYdev support
++ */
++
++static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++	struct e1000_hw *hw = bus->priv;
++	u16 out;
++	int err;
++
++	err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
++	if (err)
++		return err;
++	return out;
++}
++
++static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++                               u16 val)
++{
++	struct e1000_hw *hw = bus->priv;
++
++	return igb_write_reg_gs40g(hw, mii_id, regnum, val);
++}
++
++static int igb_enet_mdio_reset(struct mii_bus *bus)
++{
++	udelay(300);
++	return 0;
++}
++
++static void igb_enet_mii_link(struct net_device *netdev)
++{
++}
++
++/* Probe the mdio bus for phys and connect them */
++static int igb_enet_mii_probe(struct net_device *netdev)
++{
++	struct igb_adapter *adapter = netdev_priv(netdev);
++	struct e1000_hw *hw = &adapter->hw;
++	struct phy_device *phy_dev = NULL;
++	int phy_id;
++
++	/* check for attached phy */
++	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
++		if (hw->mii_bus->phy_map[phy_id]) {
++			phy_dev = hw->mii_bus->phy_map[phy_id];
++			break;
++		}
++	}
++	if (!phy_dev) {
++		netdev_err(netdev, "no PHY found\n");
++		return -ENODEV;
++	}
++
++	hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
++	phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
++			      igb_enet_mii_link, hw->phy_interface);
++	if (IS_ERR(phy_dev)) {
++		netdev_err(netdev, "could not attach to PHY\n");
++		return PTR_ERR(phy_dev);
++	}
++
++	hw->phy_dev = phy_dev;
++	netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
++		hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
++
++	return 0;
++}
++
++/* Create and register mdio bus */
++static int igb_enet_mii_init(struct pci_dev *pdev)
++{
++	struct mii_bus *mii_bus;
++	struct net_device *netdev = pci_get_drvdata(pdev);
++	struct igb_adapter *adapter = netdev_priv(netdev);
++	struct e1000_hw *hw = &adapter->hw;
++	int err;
++
++	mii_bus = mdiobus_alloc();
++	if (mii_bus == NULL) {
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	mii_bus->name = "igb_enet_mii_bus";
++	mii_bus->read = igb_enet_mdio_read;
++	mii_bus->write = igb_enet_mdio_write;
++	mii_bus->reset = igb_enet_mdio_reset;
++	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
++		 pci_name(pdev), hw->device_id + 1);
++	mii_bus->priv = hw;
++	mii_bus->parent = &pdev->dev;
++	mii_bus->phy_mask = ~(1 << hw->phy.addr);
++
++	err = mdiobus_register(mii_bus);
++	if (err) {
++		printk(KERN_ERR "failed to register mii_bus: %d\n", err);
++		goto err_out_free_mdiobus;
++	}
++	hw->mii_bus = mii_bus;
++
++	return 0;
++
++err_out_free_mdiobus:
++	mdiobus_free(mii_bus);
++err_out:
++	return err;
++}
++
++static void igb_enet_mii_remove(struct e1000_hw *hw)
++{
++	if (hw->mii_bus) {
++		mdiobus_unregister(hw->mii_bus);
++		mdiobus_free(hw->mii_bus);
++	}
++}
++#endif /* CONFIG_PHYLIB */
++
+ /**
+  *  igb_probe - Device Initialization Routine
+  *  @pdev: PCI device information struct
+@@ -2645,6 +2766,13 @@
+ 		}
+ 	}
+ 	pm_runtime_put_noidle(&pdev->dev);
++
++#ifdef CONFIG_PHYLIB
++	/* create and register the mdio bus if using ext phy */
++	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++		igb_enet_mii_init(pdev);
++#endif
++
+ 	return 0;
+ 
+ err_register:
+@@ -2792,6 +2920,10 @@
+ 	struct e1000_hw *hw = &adapter->hw;
+ 
+ 	pm_runtime_get_noresume(&pdev->dev);
++#ifdef CONFIG_PHYLIB
++	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++		igb_enet_mii_remove(hw);
++#endif
+ #ifdef CONFIG_IGB_HWMON
+ 	igb_sysfs_exit(adapter);
+ #endif
+@@ -3105,6 +3237,12 @@
+ 	if (!resuming)
+ 		pm_runtime_put(&pdev->dev);
+ 
++#ifdef CONFIG_PHYLIB
++	/* Probe and connect to PHY if using ext phy */
++	if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++		igb_enet_mii_probe(netdev);
++#endif
++
+ 	/* start the watchdog. */
+ 	hw->mac.get_link_status = 1;
+ 	schedule_work(&adapter->watchdog_task);
+@@ -7090,21 +7228,41 @@
+ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+ {
+ 	struct igb_adapter *adapter = netdev_priv(netdev);
++	struct e1000_hw *hw = &adapter->hw;
+ 	struct mii_ioctl_data *data = if_mii(ifr);
+ 
+-	if (adapter->hw.phy.media_type != e1000_media_type_copper)
++	if (adapter->hw.phy.media_type != e1000_media_type_copper &&
++	    !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
+ 		return -EOPNOTSUPP;
+ 
+ 	switch (cmd) {
+ 	case SIOCGMIIPHY:
+-		data->phy_id = adapter->hw.phy.addr;
++		data->phy_id = hw->phy.addr;
+ 		break;
+ 	case SIOCGMIIREG:
+-		if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+-				     &data->val_out))
+-			return -EIO;
++		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++			if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
++					       data->reg_num & 0x1F,
++			                       &data->val_out))
++				return -EIO;
++		} else {
++			if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
++			                     &data->val_out))
++				return -EIO;
++		}
+ 		break;
+ 	case SIOCSMIIREG:
++		if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++			if (igb_write_reg_gs40g(hw, data->phy_id,
++					        data->reg_num & 0x1F,
++					        data->val_in))
++				return -EIO;
++		} else {
++			if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
++					      data->val_in))
++				return -EIO;
++		}
++		break;
+ 	default:
+ 		return -EOPNOTSUPP;
+ 	}
diff --git a/target/linux/imx6/patches-4.3/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch b/target/linux/imx6/patches-4.3/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
new file mode 100644
index 0000000000..a2ca3257a8
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch
@@ -0,0 +1,31 @@
+Index: linux-4.3/drivers/net/phy/Kconfig
+===================================================================
+--- linux-4.3.orig/drivers/net/phy/Kconfig	2015-12-18 10:39:44.371158315 -0800
++++ linux-4.3/drivers/net/phy/Kconfig	2015-12-18 10:39:44.951158318 -0800
+@@ -309,6 +309,14 @@
+ 
+ source "drivers/net/phy/b53/Kconfig"
+ 
++config GATEWORKS_GW16083
++	tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
++	---help---
++	  The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
++	  Gateworks Ventana baseboard and provides a 7-port GbE managed
++	  Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
++	  ports"
++
+ endif # PHYLIB
+ 
+ config MICREL_KS8995MA
+Index: linux-4.3/drivers/net/phy/Makefile
+===================================================================
+--- linux-4.3.orig/drivers/net/phy/Makefile	2015-12-18 10:39:44.371158315 -0800
++++ linux-4.3/drivers/net/phy/Makefile	2015-12-18 10:39:44.951158318 -0800
+@@ -44,6 +44,7 @@
+ obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
+ obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY)	+= micrel.o
++obj-$(CONFIG_GATEWORKS_GW16083)	+= gw16083.o
+ obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY)	+= at803x.o
diff --git a/target/linux/imx6/patches-4.3/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch b/target/linux/imx6/patches-4.3/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
new file mode 100644
index 0000000000..81fbe0ec64
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch
@@ -0,0 +1,64 @@
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-12-18 10:39:44.895158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+@@ -158,6 +158,11 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_i2c2>;
+ 	status = "okay";
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &i2c3 {
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:39:44.907158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+@@ -233,6 +233,11 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_i2c2>;
+ 	status = "okay";
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &i2c3 {
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.899158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:25.000000000 -0800
+@@ -226,6 +226,11 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pinctrl_i2c2>;
+ 	status = "okay";
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &i2c3 {
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.899158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:25.000000000 -0800
+@@ -317,6 +317,11 @@
+ 			};
+ 		};
+ 	};
++
++	gw16083: gw16083@52 {
++		compatible = "gateworks,gw16083";
++		reg = <0x52>;
++	};
+ };
+ 
+ &i2c3 {