diff options
| author | Luka Perkov <luka@openwrt.org> | 2013-09-20 01:59:33 +0000 |
|---|---|---|
| committer | Luka Perkov <luka@openwrt.org> | 2013-09-20 01:59:33 +0000 |
| commit | 19570640aaf82a739da1c25f7e21da1d154ac975 (patch) | |
| tree | db73c0f678d6f026c2b225a176665f8dc9764591 /target/linux/imx6/patches-3.10 | |
| parent | 964174bc4f9863f990ea1c454fbaf5e758dfcd0d (diff) | |
| download | upstream-19570640aaf82a739da1c25f7e21da1d154ac975.tar.gz upstream-19570640aaf82a739da1c25f7e21da1d154ac975.tar.bz2 upstream-19570640aaf82a739da1c25f7e21da1d154ac975.zip | |
imx6: update gw5400-a dts
- remove common imx6q-ventana.dtsi - there isn't enough commonality to
warrent this
- rename user led's to 1-based
- add alises used by bootloader
- clean up iomux gpios
- fix pfuze slave address
- enable sata
- add delay after release of pci reset downstream from PCIe switch
- remove PCIe clock configuration as its now handled in updated driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38081 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/imx6/patches-3.10')
| -rw-r--r-- | target/linux/imx6/patches-3.10/110-gw5400-a.patch | 76 |
1 files changed, 40 insertions, 36 deletions
diff --git a/target/linux/imx6/patches-3.10/110-gw5400-a.patch b/target/linux/imx6/patches-3.10/110-gw5400-a.patch index ac0721d925..e554540dad 100644 --- a/target/linux/imx6/patches-3.10/110-gw5400-a.patch +++ b/target/linux/imx6/patches-3.10/110-gw5400-a.patch @@ -25,7 +25,38 @@ }; ecspi1 { -@@ -205,6 +213,12 @@ +@@ -187,6 +195,30 @@ + MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; ++ ++ /* No strobe */ ++ pinctrl_gpmi_nand_2: gpmi-nand-2 { ++ fsl,pins = < ++ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 ++ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; + }; + + i2c1 { +@@ -205,6 +237,12 @@ MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 >; }; @@ -38,7 +69,7 @@ }; i2c3 { -@@ -214,6 +228,12 @@ +@@ -214,6 +252,12 @@ MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 >; }; @@ -51,7 +82,7 @@ }; uart1 { -@@ -223,6 +243,12 @@ +@@ -223,6 +267,12 @@ MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; @@ -64,7 +95,7 @@ }; uart2 { -@@ -232,6 +258,21 @@ +@@ -232,6 +282,21 @@ MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; @@ -86,7 +117,7 @@ }; uart4 { -@@ -242,6 +283,15 @@ +@@ -242,6 +307,15 @@ >; }; }; @@ -112,7 +143,7 @@ #include <linux/phy.h> #include <linux/regmap.h> #include <linux/micrel_phy.h> -@@ -145,6 +146,65 @@ static void __init imx6q_sabrelite_init( +@@ -145,6 +146,38 @@ static void __init imx6q_sabrelite_init( imx6q_sabrelite_cko1_setup(); } @@ -137,48 +168,21 @@ + pci_read_config_dword(dev, 0x644, &dw); + dw |= 0xfe; // GPIO1-7 output high + pci_write_config_dword(dev, 0x644, dw); ++ ++ mdelay(1); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, + mx6_ventana_pciesw_early_fixup); + -+/* -+ * configure PCIe core clock and PCIe ref clock -+ * -+ * TODO: disable CLK1 output and use CLK2 input from si52147 as PCIe ref -+ */ -+static void __init imx6q_ventana_pcie_setup(void) -+{ -+ struct clk *axi_sel, *axi, *ref; -+ -+ axi_sel = clk_get_sys(NULL, "pcie_axi_sel"); -+ axi = clk_get_sys(NULL, "axi"); -+ ref = clk_get_sys(NULL, "pcie_ref_125m"); -+ if (IS_ERR(axi_sel) || IS_ERR(axi) || IS_ERR(ref)) { -+ pr_err("pcie setup failed - can't get clocks\n"); -+ goto put_clk; -+ } -+ clk_set_parent(axi_sel, axi); -+ clk_prepare_enable(ref); -+ -+put_clk: -+ if (!IS_ERR(axi_sel)) -+ clk_put(axi_sel); -+ if (!IS_ERR(axi)) -+ clk_put(axi); -+ if (!IS_ERR(ref)) -+ clk_put(ref); -+} -+ +static void __init imx6q_ventana_init(void) +{ -+ imx6q_ventana_pcie_setup(); + imx6q_sabrelite_cko1_setup(); +} + static void __init imx6q_1588_init(void) { struct regmap *gpr; -@@ -163,6 +223,9 @@ static void __init imx6q_usb_init(void) +@@ -163,6 +196,9 @@ static void __init imx6q_usb_init(void) static void __init imx6q_init_machine(void) { |