generic: replace mtk_sgmii patches with versions accepted upstream

Replace patches for MediaTek Ethernet driver SGMII/SerDes unit with
their corresponding upstream patches. Not all of the patches in our
tree went upstream as-is, some are slightly different implementations,
and they require the phylink_pcs helpers now made available.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

21 files changed, 875 insertions, 223 deletions

diff --git a/target/linux/generic/backport-5.15/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch b/target/linux/generic/backport-5.15/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch
new file mode 100644
index 0000000000..68f3659367
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch
@@ -0,0 +1,55 @@
+From b6a709cb51f7bdc55c01cec886098a9753ce8c28 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:10:42 +0100
+Subject: [PATCH 01/10] net: mtk_eth_soc: add definitions for PCS
+
+As a result of help from Frank Wunderlich to investigate and test, we
+know a bit more about the PCS on the Mediatek platforms. Update the
+definitions from this investigation.
+
+This PCS appears similar, but not identical to the Lynx PCS.
+
+Although not included in this patch, but for future reference, the PHY
+ID registers at offset 4 read as 0x4d544950 'MTIP'.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.h | 13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+@@ -501,8 +501,10 @@
+ #define ETHSYS_DMA_AG_MAP_PPE	BIT(2)
+ 
+ /* SGMII subsystem config registers */
+-/* Register to auto-negotiation restart */
++/* BMCR (low 16) BMSR (high 16) */
+ #define SGMSYS_PCS_CONTROL_1	0x0
++#define SGMII_BMCR		GENMASK(15, 0)
++#define SGMII_BMSR		GENMASK(31, 16)
+ #define SGMII_AN_RESTART	BIT(9)
+ #define SGMII_ISOLATE		BIT(10)
+ #define SGMII_AN_ENABLE		BIT(12)
+@@ -512,13 +514,18 @@
+ #define SGMII_PCS_FAULT		BIT(23)
+ #define SGMII_AN_EXPANSION_CLR	BIT(30)
+ 
++#define SGMSYS_PCS_ADVERTISE	0x8
++#define SGMII_ADVERTISE		GENMASK(15, 0)
++#define SGMII_LPA		GENMASK(31, 16)
++
+ /* Register to programmable link timer, the unit in 2 * 8ns */
+ #define SGMSYS_PCS_LINK_TIMER	0x18
+-#define SGMII_LINK_TIMER_DEFAULT	(0x186a0 & GENMASK(19, 0))
++#define SGMII_LINK_TIMER_MASK	GENMASK(19, 0)
++#define SGMII_LINK_TIMER_DEFAULT	(0x186a0 & SGMII_LINK_TIMER_MASK)
+ 
+ /* Register to control remote fault */
+ #define SGMSYS_SGMII_MODE		0x20
+-#define SGMII_IF_MODE_BIT0		BIT(0)
++#define SGMII_IF_MODE_SGMII		BIT(0)
+ #define SGMII_SPEED_DUPLEX_AN		BIT(1)
+ #define SGMII_SPEED_MASK		GENMASK(3, 2)
+ #define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
diff --git a/target/linux/generic/backport-5.15/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch b/target/linux/generic/backport-5.15/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch
new file mode 100644
index 0000000000..4ea428c9d6
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch
@@ -0,0 +1,74 @@
+From 5cf7797526ee81bea0f627bccaa3d887f48f53e0 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:10:47 +0100
+Subject: [PATCH 02/10] net: mtk_eth_soc: eliminate unnecessary error handling
+
+The functions called by the pcs_config() method always return zero, so
+there is no point trying to handle an error from these functions. Make
+these functions void, eliminate the "err" variable and simply return
+zero from the pcs_config() function itself.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 18 ++++++------------
+ 1 file changed, 6 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -20,7 +20,7 @@ static struct mtk_pcs *pcs_to_mtk_pcs(st
+ }
+ 
+ /* For SGMII interface mode */
+-static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
++static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
+ {
+ 	unsigned int val;
+ 
+@@ -39,16 +39,13 @@ static int mtk_pcs_setup_mode_an(struct
+ 	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ 	val &= ~SGMII_PHYA_PWD;
+ 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+-
+-	return 0;
+-
+ }
+ 
+ /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
+  * fixed speed.
+  */
+-static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+-				    phy_interface_t interface)
++static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
++				     phy_interface_t interface)
+ {
+ 	unsigned int val;
+ 
+@@ -73,8 +70,6 @@ static int mtk_pcs_setup_mode_force(stru
+ 	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ 	val &= ~SGMII_PHYA_PWD;
+ 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+-
+-	return 0;
+ }
+ 
+ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+@@ -83,15 +78,14 @@ static int mtk_pcs_config(struct phylink
+ 			  bool permit_pause_to_mac)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+-	int err = 0;
+ 
+ 	/* Setup SGMIISYS with the determined property */
+ 	if (interface != PHY_INTERFACE_MODE_SGMII)
+-		err = mtk_pcs_setup_mode_force(mpcs, interface);
++		mtk_pcs_setup_mode_force(mpcs, interface);
+ 	else if (phylink_autoneg_inband(mode))
+-		err = mtk_pcs_setup_mode_an(mpcs);
++		mtk_pcs_setup_mode_an(mpcs);
+ 
+-	return err;
++	return 0;
+ }
+ 
+ static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/backport-5.15/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch b/target/linux/generic/backport-5.15/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch
new file mode 100644
index 0000000000..64a4a72fa6
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch
@@ -0,0 +1,46 @@
+From c000dca098002da193b98099df051c9ead0cacb4 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:10:52 +0100
+Subject: [PATCH 03/10] net: mtk_eth_soc: add pcs_get_state() implementation
+
+Add a pcs_get_state() implementation which uses the advertisements
+to compute the resulting link modes, and BMSR contents to determine
+negotiation and link status.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -19,6 +19,20 @@ static struct mtk_pcs *pcs_to_mtk_pcs(st
+ 	return container_of(pcs, struct mtk_pcs, pcs);
+ }
+ 
++static void mtk_pcs_get_state(struct phylink_pcs *pcs,
++			      struct phylink_link_state *state)
++{
++	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
++	unsigned int bm, adv;
++
++	/* Read the BMSR and LPA */
++	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
++	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
++
++	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
++					 FIELD_GET(SGMII_LPA, adv));
++}
++
+ /* For SGMII interface mode */
+ static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
+ {
+@@ -117,6 +131,7 @@ static void mtk_pcs_link_up(struct phyli
+ }
+ 
+ static const struct phylink_pcs_ops mtk_pcs_ops = {
++	.pcs_get_state = mtk_pcs_get_state,
+ 	.pcs_config = mtk_pcs_config,
+ 	.pcs_an_restart = mtk_pcs_restart_an,
+ 	.pcs_link_up = mtk_pcs_link_up,
diff --git a/target/linux/generic/backport-5.15/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch b/target/linux/generic/backport-5.15/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch
new file mode 100644
index 0000000000..24610fe11e
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch
@@ -0,0 +1,130 @@
+From 0d2351dc2768061689abd4de1529fa206bbd574e Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:10:58 +0100
+Subject: [PATCH 04/10] net: mtk_eth_soc: convert mtk_sgmii to use
+ regmap_update_bits()
+
+mtk_sgmii does a lot of read-modify-write operations, for which there
+is a specific regmap function. Use this function instead of open-coding
+the operations.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 61 ++++++++++-------------
+ 1 file changed, 26 insertions(+), 35 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -36,23 +36,18 @@ static void mtk_pcs_get_state(struct phy
+ /* For SGMII interface mode */
+ static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
+ {
+-	unsigned int val;
+-
+ 	/* Setup the link timer and QPHY power up inside SGMIISYS */
+ 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
+ 		     SGMII_LINK_TIMER_DEFAULT);
+ 
+-	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
+-	val |= SGMII_REMOTE_FAULT_DIS;
+-	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+-
+-	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
+-	val |= SGMII_AN_RESTART;
+-	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+-
+-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+-	val &= ~SGMII_PHYA_PWD;
+-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
++			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
++
++	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
++			   SGMII_AN_RESTART, SGMII_AN_RESTART);
++
++	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
++			   SGMII_PHYA_PWD, 0);
+ }
+ 
+ /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
+@@ -61,29 +56,26 @@ static void mtk_pcs_setup_mode_an(struct
+ static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+ 				     phy_interface_t interface)
+ {
+-	unsigned int val;
++	unsigned int rgc3;
+ 
+-	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
+-	val &= ~RG_PHY_SPEED_MASK;
+ 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+-		val |= RG_PHY_SPEED_3_125G;
+-	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
++		rgc3 = RG_PHY_SPEED_3_125G;
++
++	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
++			   RG_PHY_SPEED_3_125G, rgc3);
+ 
+ 	/* Disable SGMII AN */
+-	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
+-	val &= ~SGMII_AN_ENABLE;
+-	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
++			   SGMII_AN_ENABLE, 0);
+ 
+ 	/* Set the speed etc but leave the duplex unchanged */
+-	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
+-	val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
+-	val |= SGMII_SPEED_1000;
+-	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
++			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
++			   SGMII_SPEED_1000);
+ 
+ 	/* Release PHYA power down state */
+-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+-	val &= ~SGMII_PHYA_PWD;
+-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
++			   SGMII_PHYA_PWD, 0);
+ }
+ 
+ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+@@ -105,29 +97,28 @@ static int mtk_pcs_config(struct phylink
+ static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+-	unsigned int val;
+ 
+-	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
+-	val |= SGMII_AN_RESTART;
+-	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
++			   SGMII_AN_RESTART, SGMII_AN_RESTART);
+ }
+ 
+ static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+ 			    phy_interface_t interface, int speed, int duplex)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+-	unsigned int val;
++	unsigned int sgm_mode;
+ 
+ 	if (!phy_interface_mode_is_8023z(interface))
+ 		return;
+ 
+ 	/* SGMII force duplex setting */
+-	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
+-	val &= ~SGMII_DUPLEX_FULL;
+ 	if (duplex == DUPLEX_FULL)
+-		val |= SGMII_DUPLEX_FULL;
++		sgm_mode = SGMII_DUPLEX_FULL;
++	else
++		sgm_mode = 0;
+ 
+-	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
++	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
++			   SGMII_DUPLEX_FULL, sgm_mode);
+ }
+ 
+ static const struct phylink_pcs_ops mtk_pcs_ops = {
diff --git a/target/linux/generic/backport-5.15/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch b/target/linux/generic/backport-5.15/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch
new file mode 100644
index 0000000000..ba76ca40ff
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch
@@ -0,0 +1,52 @@
+From 12198c3a410fe69843e335c1bbf6d4c2a4d48e4e Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:03 +0100
+Subject: [PATCH 05/10] net: mtk_eth_soc: add out of band forcing of speed and
+ duplex in pcs_link_up
+
+Add support for forcing the link speed and duplex setting in the
+pcs_link_up() method for out of band modes, which will be useful when
+we finish converting the pcs_config() method. Until then, we still have
+to force duplex for 802.3z modes to work correctly.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 28 ++++++++++++++---------
+ 1 file changed, 17 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -108,17 +108,23 @@ static void mtk_pcs_link_up(struct phyli
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+ 	unsigned int sgm_mode;
+ 
+-	if (!phy_interface_mode_is_8023z(interface))
+-		return;
++	if (!phylink_autoneg_inband(mode) ||
++	    phy_interface_mode_is_8023z(interface)) {
++		/* Force the speed and duplex setting */
++		if (speed == SPEED_10)
++			sgm_mode = SGMII_SPEED_10;
++		else if (speed == SPEED_100)
++			sgm_mode = SGMII_SPEED_100;
++		else
++			sgm_mode = SGMII_SPEED_1000;
+ 
+-	/* SGMII force duplex setting */
+-	if (duplex == DUPLEX_FULL)
+-		sgm_mode = SGMII_DUPLEX_FULL;
+-	else
+-		sgm_mode = 0;
++		if (duplex == DUPLEX_FULL)
++			sgm_mode |= SGMII_DUPLEX_FULL;
+ 
+-	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+-			   SGMII_DUPLEX_FULL, sgm_mode);
++		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
++				   SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
++				   sgm_mode);
++	}
+ }
+ 
+ static const struct phylink_pcs_ops mtk_pcs_ops = {
diff --git a/target/linux/generic/backport-5.15/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch b/target/linux/generic/backport-5.15/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch
new file mode 100644
index 0000000000..b76e159275
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch
@@ -0,0 +1,48 @@
+From 6f38fffe2179dd29612aea2c67c46ed6682b4e46 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:08 +0100
+Subject: [PATCH 06/10] net: mtk_eth_soc: move PHY power up
+
+The PHY power up is common to both configuration paths, so move it into
+the parent function. We need to do this for all serdes modes.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -45,9 +45,6 @@ static void mtk_pcs_setup_mode_an(struct
+ 
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ 			   SGMII_AN_RESTART, SGMII_AN_RESTART);
+-
+-	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+-			   SGMII_PHYA_PWD, 0);
+ }
+ 
+ /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
+@@ -72,10 +69,6 @@ static void mtk_pcs_setup_mode_force(str
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ 			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
+ 			   SGMII_SPEED_1000);
+-
+-	/* Release PHYA power down state */
+-	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+-			   SGMII_PHYA_PWD, 0);
+ }
+ 
+ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+@@ -91,6 +84,10 @@ static int mtk_pcs_config(struct phylink
+ 	else if (phylink_autoneg_inband(mode))
+ 		mtk_pcs_setup_mode_an(mpcs);
+ 
++	/* Release PHYA power down state */
++	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
++			   SGMII_PHYA_PWD, 0);
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/generic/backport-5.15/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch b/target/linux/generic/backport-5.15/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch
new file mode 100644
index 0000000000..cd9f0699b3
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch
@@ -0,0 +1,48 @@
+From f752c0df13dfeb721c11d3debb79f08cf437344f Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:13 +0100
+Subject: [PATCH 07/10] net: mtk_eth_soc: move interface speed selection
+
+Move the selection of the underlying interface speed to the pcs_config
+function, so we always program the interface speed.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 18 ++++++++++--------
+ 1 file changed, 10 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -53,14 +53,6 @@ static void mtk_pcs_setup_mode_an(struct
+ static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+ 				     phy_interface_t interface)
+ {
+-	unsigned int rgc3;
+-
+-	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+-		rgc3 = RG_PHY_SPEED_3_125G;
+-
+-	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+-			   RG_PHY_SPEED_3_125G, rgc3);
+-
+ 	/* Disable SGMII AN */
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ 			   SGMII_AN_ENABLE, 0);
+@@ -77,6 +69,16 @@ static int mtk_pcs_config(struct phylink
+ 			  bool permit_pause_to_mac)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
++	unsigned int rgc3;
++
++	if (interface == PHY_INTERFACE_MODE_2500BASEX)
++		rgc3 = RG_PHY_SPEED_3_125G;
++	else
++		rgc3 = 0;
++
++	/* Configure the underlying interface speed */
++	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
++			   RG_PHY_SPEED_3_125G, rgc3);
+ 
+ 	/* Setup SGMIISYS with the determined property */
+ 	if (interface != PHY_INTERFACE_MODE_SGMII)
diff --git a/target/linux/generic/backport-5.15/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch b/target/linux/generic/backport-5.15/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch
new file mode 100644
index 0000000000..f08358e963
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch
@@ -0,0 +1,52 @@
+From c125c66ea71b9377ae2478c4f1b87b180cc5c6ef Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:18 +0100
+Subject: [PATCH 08/10] net: mtk_eth_soc: add advertisement programming
+
+Program the advertisement into the mtk PCS block.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -70,16 +70,27 @@ static int mtk_pcs_config(struct phylink
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+ 	unsigned int rgc3;
++	int advertise;
++	bool changed;
+ 
+ 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ 		rgc3 = RG_PHY_SPEED_3_125G;
+ 	else
+ 		rgc3 = 0;
+ 
++	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
++							     advertising);
++	if (advertise < 0)
++		return advertise;
++
+ 	/* Configure the underlying interface speed */
+ 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ 			   RG_PHY_SPEED_3_125G, rgc3);
+ 
++	/* Update the advertisement, noting whether it has changed */
++	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
++				 SGMII_ADVERTISE, advertise, &changed);
++
+ 	/* Setup SGMIISYS with the determined property */
+ 	if (interface != PHY_INTERFACE_MODE_SGMII)
+ 		mtk_pcs_setup_mode_force(mpcs, interface);
+@@ -90,7 +101,7 @@ static int mtk_pcs_config(struct phylink
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ 			   SGMII_PHYA_PWD, 0);
+ 
+-	return 0;
++	return changed;
+ }
+ 
+ static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/backport-5.15/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch b/target/linux/generic/backport-5.15/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch
new file mode 100644
index 0000000000..602d52c6f4
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch
@@ -0,0 +1,63 @@
+From 3027d89f87707e7f3e5b683e0d37a32afb5bde96 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:23 +0100
+Subject: [PATCH 09/10] net: mtk_eth_soc: move and correct link timer
+ programming
+
+Program the link timer appropriately for the interface mode being
+used, using the newly introduced phylink helper that provides the
+nanosecond link timer interval.
+
+The intervals are 1.6ms for SGMII based protocols and 10ms for
+802.3z based protocols.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -36,10 +36,6 @@ static void mtk_pcs_get_state(struct phy
+ /* For SGMII interface mode */
+ static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
+ {
+-	/* Setup the link timer and QPHY power up inside SGMIISYS */
+-	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
+-		     SGMII_LINK_TIMER_DEFAULT);
+-
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ 			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
+ 
+@@ -69,8 +65,8 @@ static int mtk_pcs_config(struct phylink
+ 			  bool permit_pause_to_mac)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
++	int advertise, link_timer;
+ 	unsigned int rgc3;
+-	int advertise;
+ 	bool changed;
+ 
+ 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+@@ -83,6 +79,10 @@ static int mtk_pcs_config(struct phylink
+ 	if (advertise < 0)
+ 		return advertise;
+ 
++	link_timer = phylink_get_link_timer_ns(interface);
++	if (link_timer < 0)
++		return link_timer;
++
+ 	/* Configure the underlying interface speed */
+ 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ 			   RG_PHY_SPEED_3_125G, rgc3);
+@@ -91,6 +91,9 @@ static int mtk_pcs_config(struct phylink
+ 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
+ 				 SGMII_ADVERTISE, advertise, &changed);
+ 
++	/* Setup the link timer and QPHY power up inside SGMIISYS */
++	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
++
+ 	/* Setup SGMIISYS with the determined property */
+ 	if (interface != PHY_INTERFACE_MODE_SGMII)
+ 		mtk_pcs_setup_mode_force(mpcs, interface);
diff --git a/target/linux/generic/backport-5.15/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch b/target/linux/generic/backport-5.15/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch
new file mode 100644
index 0000000000..0e9a0535a7
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch
@@ -0,0 +1,132 @@
+From 81b0f12a2a8a1699a7d49c3995e5f71e4ec018e6 Mon Sep 17 00:00:00 2001
+From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
+Date: Thu, 27 Oct 2022 14:11:28 +0100
+Subject: [PATCH 10/10] net: mtk_eth_soc: add support for in-band 802.3z
+ negotiation
+
+As a result of help from Frank Wunderlich to investigate and test, we
+now know how to program this PCS for in-band 802.3z negotiation. Add
+support for this by moving the contents of the two functions into the
+common mtk_pcs_config() function and adding the register settings for
+802.3z negotiation.
+
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 77 ++++++++++++-----------
+ 1 file changed, 42 insertions(+), 35 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -33,41 +33,15 @@ static void mtk_pcs_get_state(struct phy
+ 					 FIELD_GET(SGMII_LPA, adv));
+ }
+ 
+-/* For SGMII interface mode */
+-static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
+-{
+-	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+-			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
+-
+-	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+-			   SGMII_AN_RESTART, SGMII_AN_RESTART);
+-}
+-
+-/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
+- * fixed speed.
+- */
+-static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+-				     phy_interface_t interface)
+-{
+-	/* Disable SGMII AN */
+-	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+-			   SGMII_AN_ENABLE, 0);
+-
+-	/* Set the speed etc but leave the duplex unchanged */
+-	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+-			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
+-			   SGMII_SPEED_1000);
+-}
+-
+ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+ 			  phy_interface_t interface,
+ 			  const unsigned long *advertising,
+ 			  bool permit_pause_to_mac)
+ {
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
++	unsigned int rgc3, sgm_mode, bmcr;
+ 	int advertise, link_timer;
+-	unsigned int rgc3;
+-	bool changed;
++	bool changed, use_an;
+ 
+ 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ 		rgc3 = RG_PHY_SPEED_3_125G;
+@@ -83,6 +57,37 @@ static int mtk_pcs_config(struct phylink
+ 	if (link_timer < 0)
+ 		return link_timer;
+ 
++	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
++	 * we assume that fixes it's speed at bitrate = line rate (in
++	 * other words, 1000Mbps or 2500Mbps).
++	 */
++	if (interface == PHY_INTERFACE_MODE_SGMII) {
++		sgm_mode = SGMII_IF_MODE_SGMII;
++		if (phylink_autoneg_inband(mode)) {
++			sgm_mode |= SGMII_REMOTE_FAULT_DIS |
++				    SGMII_SPEED_DUPLEX_AN;
++			use_an = true;
++		} else {
++			use_an = false;
++		}
++	} else if (phylink_autoneg_inband(mode)) {
++		/* 1000base-X or 2500base-X autoneg */
++		sgm_mode = SGMII_REMOTE_FAULT_DIS;
++		use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
++					   advertising);
++	} else {
++		/* 1000base-X or 2500base-X without autoneg */
++		sgm_mode = 0;
++		use_an = false;
++	}
++
++	if (use_an) {
++		/* FIXME: Do we need to set AN_RESTART here? */
++		bmcr = SGMII_AN_RESTART | SGMII_AN_ENABLE;
++	} else {
++		bmcr = 0;
++	}
++
+ 	/* Configure the underlying interface speed */
+ 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ 			   RG_PHY_SPEED_3_125G, rgc3);
+@@ -94,11 +99,14 @@ static int mtk_pcs_config(struct phylink
+ 	/* Setup the link timer and QPHY power up inside SGMIISYS */
+ 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
+ 
+-	/* Setup SGMIISYS with the determined property */
+-	if (interface != PHY_INTERFACE_MODE_SGMII)
+-		mtk_pcs_setup_mode_force(mpcs, interface);
+-	else if (phylink_autoneg_inband(mode))
+-		mtk_pcs_setup_mode_an(mpcs);
++	/* Update the sgmsys mode register */
++	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
++			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
++			   SGMII_IF_MODE_SGMII, sgm_mode);
++
++	/* Update the BMCR */
++	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
++			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
+ 
+ 	/* Release PHYA power down state */
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+@@ -121,8 +129,7 @@ static void mtk_pcs_link_up(struct phyli
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+ 	unsigned int sgm_mode;
+ 
+-	if (!phylink_autoneg_inband(mode) ||
+-	    phy_interface_mode_is_8023z(interface)) {
++	if (!phylink_autoneg_inband(mode)) {
+ 		/* Force the speed and duplex setting */
+ 		if (speed == SPEED_10)
+ 			sgm_mode = SGMII_SPEED_10;
diff --git a/target/linux/generic/backport-5.15/733-v6.2-02-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch b/target/linux/generic/backport-5.15/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
index 62830ebf10..8d2991f450 100644
--- a/target/linux/generic/backport-5.15/733-v6.2-02-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
+++ b/target/linux/generic/backport-5.15/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
@@ -1,8 +1,8 @@
 From 7ff82416de8295c61423ef6fd75f052d3837d2f7 Mon Sep 17 00:00:00 2001
 From: Alexander Couzens <lynxis@fe80.eu>
 Date: Wed, 1 Feb 2023 19:23:29 +0100
-Subject: [PATCH] net: mediatek: sgmii: ensure the SGMII PHY is powered down on
- configuration
+Subject: [PATCH 11/13] net: mediatek: sgmii: ensure the SGMII PHY is powered
+ down on configuration
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 
 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
 +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1063,11 +1063,13 @@ struct mtk_soc_data {
+@@ -1070,11 +1070,13 @@ struct mtk_soc_data {
   * @regmap:            The register map pointing at the range used to setup
   *                     SGMII modes
   * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
@@ -50,57 +50,51 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  
 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
 +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -24,6 +24,10 @@ static int mtk_pcs_setup_mode_an(struct
- {
- 	unsigned int val;
+@@ -43,11 +43,6 @@ static int mtk_pcs_config(struct phylink
+ 	int advertise, link_timer;
+ 	bool changed, use_an;
  
-+	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
-+	val &= ~RG_PHY_SPEED_MASK;
-+	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
-+
- 	/* Setup the link timer and QPHY power up inside SGMIISYS */
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
- 		     SGMII_LINK_TIMER_DEFAULT);
-@@ -36,9 +40,6 @@ static int mtk_pcs_setup_mode_an(struct
- 	val |= SGMII_AN_RESTART;
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
- 
--	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
--	val &= ~SGMII_PHYA_PWD;
--	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
- 
- 	return 0;
- 
-@@ -69,11 +70,6 @@ static int mtk_pcs_setup_mode_force(stru
- 	val |= SGMII_SPEED_1000;
- 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
- 
--	/* Release PHYA power down state */
--	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
--	val &= ~SGMII_PHYA_PWD;
--	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+-	if (interface == PHY_INTERFACE_MODE_2500BASEX)
+-		rgc3 = RG_PHY_SPEED_3_125G;
+-	else
+-		rgc3 = 0;
 -
- 	return 0;
- }
- 
-@@ -85,12 +81,32 @@ static int mtk_pcs_config(struct phylink
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- 	int err = 0;
+ 	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
+ 							     advertising);
+ 	if (advertise < 0)
+@@ -88,9 +83,22 @@ static int mtk_pcs_config(struct phylink
+ 		bmcr = 0;
+ 	}
  
+-	/* Configure the underlying interface speed */
+-	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+-			   RG_PHY_SPEED_3_125G, rgc3);
 +	if (mpcs->interface != interface) {
 +		/* PHYA power down */
 +		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
 +				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
 +
++		if (interface == PHY_INTERFACE_MODE_2500BASEX)
++			rgc3 = RG_PHY_SPEED_3_125G;
++		else
++			rgc3 = 0;
++
++		/* Configure the underlying interface speed */
++		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
++				   RG_PHY_SPEED_3_125G, rgc3);
++
 +		mpcs->interface = interface;
 +	}
-+
- 	/* Setup SGMIISYS with the determined property */
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
- 		err = mtk_pcs_setup_mode_force(mpcs, interface);
- 	else if (phylink_autoneg_inband(mode))
- 		err = mtk_pcs_setup_mode_an(mpcs);
  
+ 	/* Update the advertisement, noting whether it has changed */
+ 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
+@@ -108,9 +116,17 @@ static int mtk_pcs_config(struct phylink
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ 			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
+ 
+-	/* Release PHYA power down state */
+-	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+-			   SGMII_PHYA_PWD, 0);
 +	/* Release PHYA power down state
 +	 * Only removing bit SGMII_PHYA_PWD isn't enough.
 +	 * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
@@ -112,11 +106,10 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 +	 */
 +	usleep_range(50, 100);
 +	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
-+
- 	return err;
- }
  
-@@ -145,6 +161,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
+ 	return changed;
+ }
+@@ -171,6 +187,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
  			return PTR_ERR(ss->pcs[i].regmap);
  
  		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
diff --git a/target/linux/generic/backport-5.15/733-v6.2-03-net-mediatek-sgmii-fix-duplex-configuration.patch b/target/linux/generic/backport-5.15/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch
index eb6837f47a..79e5ad147c 100644
--- a/target/linux/generic/backport-5.15/733-v6.2-03-net-mediatek-sgmii-fix-duplex-configuration.patch
+++ b/target/linux/generic/backport-5.15/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch
@@ -1,7 +1,7 @@
 From 9d32637122de88f1ef614c29703f0e050cad342e Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>
 Date: Wed, 1 Feb 2023 19:23:30 +0100
-Subject: [PATCH] net: mediatek: sgmii: fix duplex configuration
+Subject: [PATCH 12/13] net: mediatek: sgmii: fix duplex configuration
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -24,7 +24,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 
 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
 +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -524,7 +524,7 @@
+@@ -531,7 +531,7 @@
  #define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
  #define SGMII_SPEED_100			FIELD_PREP(SGMII_SPEED_MASK, 1)
  #define SGMII_SPEED_1000		FIELD_PREP(SGMII_SPEED_MASK, 2)
@@ -35,26 +35,18 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  #define SGMII_CODE_SYNC_SET_VAL		BIT(9)
 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
 +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -66,7 +66,7 @@ static int mtk_pcs_setup_mode_force(stru
+@@ -154,11 +154,11 @@ static void mtk_pcs_link_up(struct phyli
+ 		else
+ 			sgm_mode = SGMII_SPEED_1000;
  
- 	/* Set the speed etc but leave the duplex unchanged */
- 	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
-+	val &= SGMII_DUPLEX_HALF | ~SGMII_IF_MODE_MASK;
- 	val |= SGMII_SPEED_1000;
- 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+-		if (duplex == DUPLEX_FULL)
+-			sgm_mode |= SGMII_DUPLEX_FULL;
++		if (duplex != DUPLEX_FULL)
++			sgm_mode |= SGMII_DUPLEX_HALF;
  
-@@ -131,9 +131,10 @@ static void mtk_pcs_link_up(struct phyli
- 
- 	/* SGMII force duplex setting */
- 	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val &= ~SGMII_DUPLEX_FULL;
--	if (duplex == DUPLEX_FULL)
--		val |= SGMII_DUPLEX_FULL;
-+
-+	val &= ~SGMII_DUPLEX_HALF;
-+	if (duplex != DUPLEX_FULL)
-+		val |= SGMII_DUPLEX_HALF;
- 
- 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+ 		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+-				   SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
++				   SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
+ 				   sgm_mode);
+ 	}
  }
diff --git a/target/linux/generic/backport-5.15/733-v6.2-04-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch b/target/linux/generic/backport-5.15/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
index ace8aa075b..56d7a1348f 100644
--- a/target/linux/generic/backport-5.15/733-v6.2-04-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
+++ b/target/linux/generic/backport-5.15/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
@@ -1,7 +1,7 @@
 From 3337a6e04ddf2923a1bdcf3d31b3b52412bf82dd Mon Sep 17 00:00:00 2001
 From: Alexander Couzens <lynxis@fe80.eu>
 Date: Wed, 1 Feb 2023 19:23:31 +0100
-Subject: [PATCH] mtk_sgmii: enable PCS polling to allow SFP work
+Subject: [PATCH 13/13] mtk_sgmii: enable PCS polling to allow SFP work
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
@@ -23,7 +23,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 
 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
 +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -162,6 +162,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
+@@ -187,6 +187,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
  			return PTR_ERR(ss->pcs[i].regmap);
  
  		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
diff --git a/target/linux/generic/pending-5.15/733-01-net-ethernet-mtk_eth_soc-reset-PCS-state.patch b/target/linux/generic/backport-5.15/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
index 4d52d7be39..a63b110914 100644
--- a/target/linux/generic/pending-5.15/733-01-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
+++ b/target/linux/generic/backport-5.15/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
@@ -1,16 +1,20 @@
-From b66105968b8c37c26a75b9da9281cbc1c8f73594 Mon Sep 17 00:00:00 2001
+From 611e2dabb4b3243d176739fd6a5a34d007fa3f86 Mon Sep 17 00:00:00 2001
 From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 22 Jan 2023 23:58:36 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: reset PCS state
+Date: Tue, 14 Mar 2023 00:34:26 +0000
+Subject: [PATCH 1/2] net: ethernet: mtk_eth_soc: reset PCS state
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
 
-Reset PCS state when changing interface mode.
+Reset the internal PCS state machine when changing interface mode.
+This prevents confusing the state machine when changing interface
+modes, e.g. from SGMII to 2500Base-X or vice-versa.
 
+Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
 Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
 Tested-by: Bjørn Mork <bjorn@mork.no>
 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
 ---
  drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
  drivers/net/ethernet/mediatek/mtk_sgmii.c   | 4 ++++
@@ -18,7 +22,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
 +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -530,6 +530,10 @@
+@@ -539,6 +539,10 @@
  #define SGMII_SEND_AN_ERROR_EN		BIT(11)
  #define SGMII_IF_MODE_MASK		GENMASK(5, 1)
  
@@ -31,7 +35,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  #define RG_PHY_SPEED_MASK	(BIT(2) | BIT(3))
 --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
 +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -90,6 +90,10 @@ static int mtk_pcs_config(struct phylink
+@@ -88,6 +88,10 @@ static int mtk_pcs_config(struct phylink
  		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
  				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
  
@@ -39,6 +43,6 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 +		regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
 +				   SGMII_SW_RESET, SGMII_SW_RESET);
 +
- 		mpcs->interface = interface;
- 	}
- 
+ 		if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ 			rgc3 = RG_PHY_SPEED_3_125G;
+ 		else
diff --git a/target/linux/generic/backport-5.15/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch b/target/linux/generic/backport-5.15/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch
new file mode 100644
index 0000000000..0fabeea20c
--- /dev/null
+++ b/target/linux/generic/backport-5.15/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch
@@ -0,0 +1,103 @@
+From 6e933a804c7db8be64f367f33e63cd7dcc302ebb Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Tue, 14 Mar 2023 00:34:45 +0000
+Subject: [PATCH 2/2] net: ethernet: mtk_eth_soc: only write values if needed
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Only restart auto-negotiation and write link timer if actually
+necessary. This prevents losing the link in case of minor
+changes.
+
+Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
+Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Tested-by: Bjørn Mork <bjorn@mork.no>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/mediatek/mtk_sgmii.c | 24 +++++++++++------------
+ 1 file changed, 12 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
+@@ -38,20 +38,16 @@ static int mtk_pcs_config(struct phylink
+ 			  const unsigned long *advertising,
+ 			  bool permit_pause_to_mac)
+ {
++	bool mode_changed = false, changed, use_an;
+ 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
+ 	unsigned int rgc3, sgm_mode, bmcr;
+ 	int advertise, link_timer;
+-	bool changed, use_an;
+ 
+ 	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
+ 							     advertising);
+ 	if (advertise < 0)
+ 		return advertise;
+ 
+-	link_timer = phylink_get_link_timer_ns(interface);
+-	if (link_timer < 0)
+-		return link_timer;
+-
+ 	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
+ 	 * we assume that fixes it's speed at bitrate = line rate (in
+ 	 * other words, 1000Mbps or 2500Mbps).
+@@ -77,13 +73,16 @@ static int mtk_pcs_config(struct phylink
+ 	}
+ 
+ 	if (use_an) {
+-		/* FIXME: Do we need to set AN_RESTART here? */
+-		bmcr = SGMII_AN_RESTART | SGMII_AN_ENABLE;
++		bmcr = SGMII_AN_ENABLE;
+ 	} else {
+ 		bmcr = 0;
+ 	}
+ 
+ 	if (mpcs->interface != interface) {
++		link_timer = phylink_get_link_timer_ns(interface);
++		if (link_timer < 0)
++			return link_timer;
++
+ 		/* PHYA power down */
+ 		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ 				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
+@@ -101,16 +100,17 @@ static int mtk_pcs_config(struct phylink
+ 		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ 				   RG_PHY_SPEED_3_125G, rgc3);
+ 
++		/* Setup the link timer */
++		regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
++
+ 		mpcs->interface = interface;
++		mode_changed = true;
+ 	}
+ 
+ 	/* Update the advertisement, noting whether it has changed */
+ 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
+ 				 SGMII_ADVERTISE, advertise, &changed);
+ 
+-	/* Setup the link timer and QPHY power up inside SGMIISYS */
+-	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
+-
+ 	/* Update the sgmsys mode register */
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ 			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
+@@ -118,7 +118,7 @@ static int mtk_pcs_config(struct phylink
+ 
+ 	/* Update the BMCR */
+ 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+-			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
++			   SGMII_AN_ENABLE, bmcr);
+ 
+ 	/* Release PHYA power down state
+ 	 * Only removing bit SGMII_PHYA_PWD isn't enough.
+@@ -132,7 +132,7 @@ static int mtk_pcs_config(struct phylink
+ 	usleep_range(50, 100);
+ 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
+ 
+-	return changed;
++	return changed || mode_changed;
+ }
+ 
+ static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/pending-5.15/724-net-mtk_sgmii-implement-mtk_pcs_ops.patch b/target/linux/generic/pending-5.15/724-net-mtk_sgmii-implement-mtk_pcs_ops.patch
deleted file mode 100644
index 9a6b228a27..0000000000
--- a/target/linux/generic/pending-5.15/724-net-mtk_sgmii-implement-mtk_pcs_ops.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From cbfed00575d15eafd85efd9619b7ecc0836a4aa7 Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Sat, 13 Aug 2022 14:42:12 +0200
-Subject: [PATCH 04/10] net: mtk_sgmii: implement mtk_pcs_ops
-
-Implement mtk_pcs_ops for the SGMII pcs to read the current state
-of the hardware.
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
-[added DUPLEX_FULL]
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -139,10 +139,28 @@ static void mtk_pcs_link_up(struct phyli
- 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
- }
- 
-+static void mtk_pcs_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state)
-+{
-+	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
-+	unsigned int val;
-+
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
-+	state->an_complete = !!(val & SGMII_AN_COMPLETE);
-+	state->link = !!(val & SGMII_LINK_STATYS);
-+	if (!state->link)
-+		return;
-+
-+	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
-+	state->speed = val & RG_PHY_SPEED_3_125G ? SPEED_2500 : SPEED_1000;
-+	state->duplex = DUPLEX_FULL;
-+	state->pause = 0;
-+}
-+
- static const struct phylink_pcs_ops mtk_pcs_ops = {
- 	.pcs_config = mtk_pcs_config,
- 	.pcs_an_restart = mtk_pcs_restart_an,
- 	.pcs_link_up = mtk_pcs_link_up,
-+	.pcs_get_state = mtk_pcs_get_state,
- };
- 
- int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
diff --git a/target/linux/generic/pending-5.15/727-net-mtk_sgmii-mtk_pcs_setup_mode_an-don-t-rely-on-re.patch b/target/linux/generic/pending-5.15/727-net-mtk_sgmii-mtk_pcs_setup_mode_an-don-t-rely-on-re.patch
deleted file mode 100644
index fd68ce22f6..0000000000
--- a/target/linux/generic/pending-5.15/727-net-mtk_sgmii-mtk_pcs_setup_mode_an-don-t-rely-on-re.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From e4dca7affb8c03438b63bdb5fddefd6ad2431cfd Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Mon, 15 Aug 2022 14:59:29 +0200
-Subject: [PATCH 07/10] net: mtk_sgmii: mtk_pcs_setup_mode_an: don't rely on
- register defaults
-
-Ensure autonegotiation is enabled.
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -32,12 +32,13 @@ static int mtk_pcs_setup_mode_an(struct
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
- 		     SGMII_LINK_TIMER_DEFAULT);
- 
-+	/* disable remote fault & enable auto neg */
- 	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val |= SGMII_REMOTE_FAULT_DIS;
-+	val |= SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN;
- 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
- 
- 	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
--	val |= SGMII_AN_RESTART;
-+	val |= SGMII_AN_RESTART | SGMII_AN_ENABLE;
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
- 
- 
diff --git a/target/linux/generic/pending-5.15/728-net-mtk_sgmii-set-the-speed-according-to-the-phy-int.patch b/target/linux/generic/pending-5.15/728-net-mtk_sgmii-set-the-speed-according-to-the-phy-int.patch
deleted file mode 100644
index 1649a64551..0000000000
--- a/target/linux/generic/pending-5.15/728-net-mtk_sgmii-set-the-speed-according-to-the-phy-int.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 952b64575613d26163a5afa5ff8bfdb57840091b Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Mon, 15 Aug 2022 15:00:14 +0200
-Subject: [PATCH 08/10] net: mtk_sgmii: set the speed according to the phy
- interface in AN
-
-The non auto-negotioting code path is setting the correct speed for the
-interface. Ensure auto-negotiation code path is doing it as well.
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -20,12 +20,14 @@ static struct mtk_pcs *pcs_to_mtk_pcs(st
- }
- 
- /* For SGMII interface mode */
--static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
-+static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs, phy_interface_t interface)
- {
- 	unsigned int val;
- 
- 	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
- 	val &= ~RG_PHY_SPEED_MASK;
-+	if (interface == PHY_INTERFACE_MODE_2500BASEX)
-+		val |= RG_PHY_SPEED_3_125G;
- 	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
- 
- 	/* Setup the link timer and QPHY power up inside SGMIISYS */
-@@ -94,7 +96,7 @@ static int mtk_pcs_config(struct phylink
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
- 		err = mtk_pcs_setup_mode_force(mpcs, interface);
- 	else if (phylink_autoneg_inband(mode))
--		err = mtk_pcs_setup_mode_an(mpcs);
-+		err = mtk_pcs_setup_mode_an(mpcs, interface);
- 
- 	/* Release PHYA power down state
- 	 * Only removing bit SGMII_PHYA_PWD isn't enough.
diff --git a/target/linux/generic/pending-5.15/729-net-mtk_eth_soc-improve-comment.patch b/target/linux/generic/pending-5.15/729-net-mtk_eth_soc-improve-comment.patch
deleted file mode 100644
index cd64c6147a..0000000000
--- a/target/linux/generic/pending-5.15/729-net-mtk_eth_soc-improve-comment.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 06773f19cffd6c9d34dcbc8320169afef5ab60ba Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Mon, 15 Aug 2022 13:58:07 +0200
-Subject: [PATCH 09/10] net: mtk_eth_soc: improve comment
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -67,7 +67,8 @@ static int mtk_pcs_setup_mode_force(stru
- 	val &= ~SGMII_AN_ENABLE;
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
- 
--	/* Set the speed etc but leave the duplex unchanged */
-+	/* Set the speed etc but leave the duplex unchanged.
-+	 * The SGMII mode for 2.5gbit is the same as for 1gbit, expect the speed in ANA_RGC3 */
- 	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
- 	val &= SGMII_DUPLEX_HALF | ~SGMII_IF_MODE_MASK;
- 	val |= SGMII_SPEED_1000;
diff --git a/target/linux/generic/pending-5.15/731-net-ethernet-mediatek-ppe-add-support-for-flow-accou.patch b/target/linux/generic/pending-5.15/731-net-ethernet-mediatek-ppe-add-support-for-flow-accou.patch
index 9268d3e428..67bd504da1 100644
--- a/target/linux/generic/pending-5.15/731-net-ethernet-mediatek-ppe-add-support-for-flow-accou.patch
+++ b/target/linux/generic/pending-5.15/731-net-ethernet-mediatek-ppe-add-support-for-flow-accou.patch
@@ -90,7 +90,7 @@ v2: fix wrong variable name in return value check spotted by Denis Kirjanov
  		.rxd_size = sizeof(struct mtk_rx_dma_v2),
 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
 +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1026,6 +1026,8 @@ struct mtk_reg_map {
+@@ -1037,6 +1037,8 @@ struct mtk_reg_map {
   *				the extra setup for those pins used by GMAC.
   * @hash_offset			Flow table hash offset.
   * @foe_entry_size		Foe table entry size.
@@ -99,7 +99,7 @@ v2: fix wrong variable name in return value check spotted by Denis Kirjanov
   * @txd_size			Tx DMA descriptor size.
   * @rxd_size			Rx DMA descriptor size.
   * @rx_irq_done_mask		Rx irq done register mask.
-@@ -1043,6 +1045,7 @@ struct mtk_soc_data {
+@@ -1054,6 +1056,7 @@ struct mtk_soc_data {
  	u8		hash_offset;
  	u16		foe_entry_size;
  	netdev_features_t hw_features;
diff --git a/target/linux/generic/pending-5.15/736-01-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch b/target/linux/generic/pending-5.15/736-01-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
index 0496752f78..4017e2beac 100644
--- a/target/linux/generic/pending-5.15/736-01-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
+++ b/target/linux/generic/pending-5.15/736-01-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
 +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1319,6 +1319,9 @@ int mtk_gmac_rgmii_path_setup(struct mtk
+@@ -1326,6 +1326,9 @@ int mtk_gmac_rgmii_path_setup(struct mtk
  int mtk_eth_offload_init(struct mtk_eth *eth);
  int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
  		     void *type_data);