kernel: 5.10: qca8k: backport qca8k_setup tidy-up

Tidy qca8k_setup for loops relating to port handling. No functional
changes.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>

1 files changed, 151 insertions, 0 deletions

diff --git a/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch b/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
new file mode 100644
index 0000000000..71fa3022d5
--- /dev/null
+++ b/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
@@ -0,0 +1,151 @@
+From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001
+From: Ansuel Smith <ansuelsmth@gmail.com>
+Date: Tue, 19 Oct 2021 02:08:50 +0200
+Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check
+
+Tidy and organize qca8k setup function from multiple for loop.
+Change for loop in bridge leave/join to scan all port and skip cpu port.
+No functional change intended.
+
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++--------------------
+ 1 file changed, 44 insertions(+), 30 deletions(-)
+
+--- a/drivers/net/dsa/qca8k.c
++++ b/drivers/net/dsa/qca8k.c
+@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds)
+ 	if (ret)
+ 		dev_warn(priv->dev, "mib init failed");
+ 
+-	/* Enable QCA header mode on the cpu port */
+-	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
+-			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+-			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+-	if (ret) {
+-		dev_err(priv->dev, "failed enabling QCA header mode");
+-		return ret;
+-	}
+-
+-	/* Disable forwarding by default on all ports */
++	/* Initial setup of all ports */
+ 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
++		/* Disable forwarding by default on all ports */
+ 		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ 				QCA8K_PORT_LOOKUP_MEMBER, 0);
+ 		if (ret)
+ 			return ret;
+-	}
+ 
+-	/* Disable MAC by default on all ports */
+-	for (i = 1; i < QCA8K_NUM_PORTS; i++)
+-		qca8k_port_set_status(priv, i, 0);
++		/* Enable QCA header mode on all cpu ports */
++		if (dsa_is_cpu_port(ds, i)) {
++			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
++					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
++					  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
++			if (ret) {
++				dev_err(priv->dev, "failed enabling QCA header mode");
++				return ret;
++			}
++		}
++
++		/* Disable MAC by default on all user ports */
++		if (dsa_is_user_port(ds, i))
++			qca8k_port_set_status(priv, i, 0);
++	}
+ 
+-	/* Forward all unknown frames to CPU port for Linux processing */
++	/* Forward all unknown frames to CPU port for Linux processing
++	 * Notice that in multi-cpu config only one port should be set
++	 * for igmp, unknown, multicast and broadcast packet
++	 */
+ 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ 			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ 			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds)
+ 	if (ret)
+ 		return ret;
+ 
+-	/* Setup connection between CPU port & user ports */
++	/* Setup connection between CPU port & user ports
++	 * Configure specific switch configuration for ports
++	 */
+ 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ 		/* CPU port gets connected to all user ports of the switch */
+ 		if (dsa_is_cpu_port(ds, i)) {
+-			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
++			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ 					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ 			if (ret)
+ 				return ret;
+@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds)
+ 			if (ret)
+ 				return ret;
+ 		}
+-	}
+ 
+-	/* The port 5 of the qca8337 have some problem in flood condition. The
+-	 * original legacy driver had some specific buffer and priority settings
+-	 * for the different port suggested by the QCA switch team. Add this
+-	 * missing settings to improve switch stability under load condition.
+-	 * This problem is limited to qca8337 and other qca8k switch are not affected.
+-	 */
+-	if (priv->switch_id == QCA8K_ID_QCA8337) {
+-		for (i = 0; i < QCA8K_NUM_PORTS; i++) {
++		/* The port 5 of the qca8337 have some problem in flood condition. The
++		 * original legacy driver had some specific buffer and priority settings
++		 * for the different port suggested by the QCA switch team. Add this
++		 * missing settings to improve switch stability under load condition.
++		 * This problem is limited to qca8337 and other qca8k switch are not affected.
++		 */
++		if (priv->switch_id == QCA8K_ID_QCA8337) {
+ 			switch (i) {
+ 			/* The 2 CPU port and port 5 requires some different
+ 			 * priority than any other ports.
+@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds)
+ 				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
+ 				  mask);
+ 		}
++
++		/* Set initial MTU for every port.
++		 * We have only have a general MTU setting. So track
++		 * every port and set the max across all port.
++		 */
++		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
+ 	}
+ 
+ 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds)
+ 	}
+ 
+ 	/* Setup our port MTUs to match power on defaults */
+-	for (i = 0; i < QCA8K_NUM_PORTS; i++)
+-		priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
+ 	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ 	if (ret)
+ 		dev_warn(priv->dev, "failed setting MTU settings");
+@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch
+ 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ 	port_mask = BIT(cpu_port);
+ 
+-	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
++	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
++		if (dsa_is_cpu_port(ds, i))
++			continue;
+ 		if (dsa_to_port(ds, i)->bridge_dev != br)
+ 			continue;
+ 		/* Add this port to the portvlan mask of the other ports
+@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switc
+ 
+ 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ 
+-	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
++	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
++		if (dsa_is_cpu_port(ds, i))
++			continue;
+ 		if (dsa_to_port(ds, i)->bridge_dev != br)
+ 			continue;
+ 		/* Remove this port to the portvlan mask of the other ports