kernel: bump 5.10 to 5.10.101

Removed upstreamed:
  pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1]
  bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>

4 files changed, 17 insertions, 74 deletions

diff --git a/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch b/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
index 13e241a400..278df46313 100644
--- a/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
+++ b/target/linux/generic/backport-5.10/712-v5.13-net-phy-marvell-refactor-HWMON-OOP-style.patch
@@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/drivers/net/phy/marvell.c
 +++ b/drivers/net/phy/marvell.c
-@@ -2140,6 +2140,19 @@ static int marvell_vct7_cable_test_get_s
+@@ -2141,6 +2141,19 @@ static int marvell_vct7_cable_test_get_s
  }
  
  #ifdef CONFIG_HWMON
@@ -38,7 +38,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
  {
  	int oldpage;
-@@ -2183,75 +2196,6 @@ error:
+@@ -2184,75 +2197,6 @@ error:
  	return phy_restore_page(phydev, oldpage, ret);
  }
  
@@ -114,7 +114,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
  {
  	int ret;
-@@ -2314,92 +2258,6 @@ static int m88e1510_get_temp_alarm(struc
+@@ -2315,92 +2259,6 @@ static int m88e1510_get_temp_alarm(struc
  	return 0;
  }
  
@@ -207,7 +207,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
  {
  	int sum = 0;
-@@ -2458,63 +2316,112 @@ error:
+@@ -2459,63 +2317,112 @@ error:
  	return ret;
  }
  
@@ -343,7 +343,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  };
  
  static int marvell_hwmon_name(struct phy_device *phydev)
-@@ -2537,49 +2444,48 @@ static int marvell_hwmon_name(struct phy
+@@ -2538,49 +2445,48 @@ static int marvell_hwmon_name(struct phy
  	return 0;
  }
  
@@ -416,7 +416,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  {
  	return 0;
  }
-@@ -2595,40 +2501,7 @@ static int marvell_probe(struct phy_devi
+@@ -2596,40 +2502,7 @@ static int marvell_probe(struct phy_devi
  
  	phydev->priv = priv;
  
@@ -458,7 +458,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  }
  
  static struct phy_driver marvell_drivers[] = {
-@@ -2713,8 +2586,9 @@ static struct phy_driver marvell_drivers
+@@ -2714,8 +2587,9 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1121R,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1121R",
@@ -469,7 +469,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		.config_init = marvell_config_init,
  		.config_aneg = m88e1121_config_aneg,
  		.read_status = marvell_read_status,
-@@ -2833,9 +2707,10 @@ static struct phy_driver marvell_drivers
+@@ -2834,9 +2708,10 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1510,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1510",
@@ -481,7 +481,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		.config_init = m88e1510_config_init,
  		.config_aneg = m88e1510_config_aneg,
  		.read_status = marvell_read_status,
-@@ -2862,9 +2737,10 @@ static struct phy_driver marvell_drivers
+@@ -2863,9 +2738,10 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1540,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1540",
@@ -493,7 +493,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		.config_init = marvell_config_init,
  		.config_aneg = m88e1510_config_aneg,
  		.read_status = marvell_read_status,
-@@ -2888,7 +2764,8 @@ static struct phy_driver marvell_drivers
+@@ -2889,7 +2765,8 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1545,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1545",
@@ -503,7 +503,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		/* PHY_GBIT_FEATURES */
  		.flags = PHY_POLL_CABLE_TEST,
  		.config_init = marvell_config_init,
-@@ -2934,9 +2811,10 @@ static struct phy_driver marvell_drivers
+@@ -2935,9 +2812,10 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E6341 Family",
@@ -515,7 +515,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		.config_init = marvell_config_init,
  		.config_aneg = m88e6390_config_aneg,
  		.read_status = marvell_read_status,
-@@ -2960,9 +2838,10 @@ static struct phy_driver marvell_drivers
+@@ -2961,9 +2839,10 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E6390 Family",
@@ -527,7 +527,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		.config_init = marvell_config_init,
  		.config_aneg = m88e6390_config_aneg,
  		.read_status = marvell_read_status,
-@@ -2986,7 +2865,8 @@ static struct phy_driver marvell_drivers
+@@ -2987,7 +2866,8 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1340S,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1340S",
@@ -537,7 +537,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  		/* PHY_GBIT_FEATURES */
  		.config_init = marvell_config_init,
  		.config_aneg = m88e1510_config_aneg,
-@@ -3008,7 +2888,8 @@ static struct phy_driver marvell_drivers
+@@ -3009,7 +2889,8 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1548P,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1548P",
diff --git a/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch b/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
index 3e01e727e1..b86e9bf640 100644
--- a/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
+++ b/target/linux/generic/backport-5.10/713-v5.15-net-phy-marvell-add-SFP-support-for-88E1510.patch
@@ -49,7 +49,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  #define MII_88E1510_GEN_CTRL_REG_1_RESET	0x8000	/* Soft reset */
  
  #define MII_VCT5_TX_RX_MDI0_COUPLING	0x10
-@@ -2504,6 +2513,100 @@ static int marvell_probe(struct phy_devi
+@@ -2505,6 +2514,100 @@ static int marvell_probe(struct phy_devi
  	return marvell_hwmon_probe(phydev);
  }
  
@@ -150,7 +150,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  static struct phy_driver marvell_drivers[] = {
  	{
  		.phy_id = MARVELL_PHY_ID_88E1101,
-@@ -2710,7 +2813,7 @@ static struct phy_driver marvell_drivers
+@@ -2711,7 +2814,7 @@ static struct phy_driver marvell_drivers
  		.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
  		.features = PHY_GBIT_FIBRE_FEATURES,
  		.flags = PHY_POLL_CABLE_TEST,
diff --git a/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
index 99f42ff212..9247401140 100644
--- a/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
+++ b/target/linux/generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
@@ -17,7 +17,7 @@ Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
 
 --- a/drivers/net/dsa/mv88e6xxx/chip.c
 +++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -5431,6 +5431,7 @@ static int mv88e6xxx_register_switch(str
+@@ -5436,6 +5436,7 @@ static int mv88e6xxx_register_switch(str
  	ds->ops = &mv88e6xxx_switch_ops;
  	ds->ageing_time_min = chip->info->age_time_coeff;
  	ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
diff --git a/target/linux/generic/pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch b/target/linux/generic/pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch
deleted file mode 100644
index bdd2c31b41..0000000000
--- a/target/linux/generic/pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 67ae6887854e4b6e736c34d4fd7087540ed31d4e Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Tue, 11 Jan 2022 21:59:50 +0100
-Subject: [PATCH] USB: serial: option: add ZTE MF286D modem
-
-Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.
-
-T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
-D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
-P:  Vendor=19d2 ProdID=1485 Rev=52.87
-S:  Manufacturer=ZTE,Incorporated
-S:  Product=ZTE Technologies MSM
-S:  SerialNumber=MF286DZTED000000
-C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
-A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
-I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
-E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
-E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
-E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
-E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
-E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
-E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
-E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-
-https://lore.kernel.org/linux-usb/20220111221205.14662-1-paweldembicki@gmail.com/
----
- drivers/usb/serial/option.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/usb/serial/option.c
-+++ b/drivers/usb/serial/option.c
-@@ -1649,6 +1649,8 @@ static const struct usb_device_id option
- 	  .driver_info = RSVD(2) },
- 	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
- 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */
-+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff),  /* ZTE MF286D */
-+	  .driver_info = RSVD(5) },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },