kernel: bump 5.4 to 5.4.51

update via update_kernel.sh -v -u 5.4

Removed upstreamed patches:
 350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch

Script refreshed patches:
 902-debloat_proc.patch
 904-debloat_dma_buf.patch

Attempted merge conflict in following patches:
 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch

Build system: x86_64
Build tested: ipq806x (Netgear R7800)

Signed-off-by: John Audia <graysky@archlinux.us>
[fixed sha256sum of the tarball]
Signed-off-by: Petr Štetiar <ynezz@true.cz>

1 files changed, 0 insertions, 61 deletions

diff --git a/target/linux/generic/pending-5.4/350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch b/target/linux/generic/pending-5.4/350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch
deleted file mode 100644
index 063ec0e9fb..0000000000
--- a/target/linux/generic/pending-5.4/350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From db4603e30effd74d4adb6bcdf73072b2c06fafcd Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Jul 2020 00:07:15 +0200
-Subject: [PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
-
-This resolves the hazard between the mtc0 in the change_c0_status() and
-the mfc0 in configure_exception_vector(). Without resolving this hazard
-configure_exception_vector() could read an old value and would restore
-this old value again. This would revert the changes change_c0_status()
-did. I checked this by printing out the read_c0_status() at the end of
-per_cpu_trap_init() and the ST0_MX is not set without this patch.
-
-The hazard is documented in the MIPS Architecture Reference Manual Vol.
-III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
-6.03 table 8.1 which includes:
-
-   Producer | Consumer | Hazard
-  ----------|----------|----------------------------
-   mtc0     | mfc0     | any coprocessor 0 register
-
-I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
-There the change_c0_status() function would activate the DSPen by
-setting ST0_MX in the c0_status register. This was reverted and then the
-system got a DSP exception when the DSP registers were saved in
-save_dsp() in the first process switch. The crash looks like this:
-
-[    0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[    0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
-[    0.107070] Kernel panic - not syncing: Unexpected DSP exception
-[    0.113470] Rebooting in 1 seconds..
-
-We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
-not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
-kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
-did not happen.
-
-In the kernel I bisected this problem to commit 9012d011660e ("compiler:
-allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
-reverted it also happened after commit 172dcd935c34b ("MIPS: Always
-allocate exception vector for MIPSr2+").
-
-Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
-does similar changes to a different file. I am not sure if there are
-more places affected by this problem.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: <stable@vger.kernel.org>
----
- arch/mips/kernel/traps.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -2126,6 +2126,7 @@ static void configure_status(void)
- 
- 	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
- 			 status_set);
-+	back_to_back_c0_hazard();
- }
- 
- unsigned int hwrena;