kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 149 insertions, 0 deletions

diff --git a/target/linux/generic/pending-4.9/834-ledtrig-libata.patch b/target/linux/generic/pending-4.9/834-ledtrig-libata.patch
new file mode 100644
index 0000000000..44ee23fb9b
--- /dev/null
+++ b/target/linux/generic/pending-4.9/834-ledtrig-libata.patch
@@ -0,0 +1,149 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: libata: add ledtrig support
+
+This adds a LED trigger for each ATA port indicating disk activity.
+
+As this is needed only on specific platforms (NAS SoCs and such),
+these platforms should define ARCH_WANTS_LIBATA_LEDS if there
+are boards with LED(s) intended to indicate ATA disk activity and
+need the OS to take care of that.
+In that way, if not selected, LED trigger support not will be
+included in libata-core and both, codepaths and structures remain
+untouched.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/ata/Kconfig       | 16 ++++++++++++++++
+ drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
+ include/linux/libata.h    |  9 +++++++++
+ 3 files changed, 66 insertions(+)
+
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
+ 
+ 	  If unsure, say Y.
+ 
++config ARCH_WANT_LIBATA_LEDS
++	bool
++
++config ATA_LEDS
++	bool "support ATA port LED triggers"
++	depends on ARCH_WANT_LIBATA_LEDS
++	select NEW_LEDS
++	select LEDS_CLASS
++	select LEDS_TRIGGERS
++	default y
++	help
++	  This option adds a LED trigger for each registered ATA port.
++	  It is used to drive disk activity leds connected via GPIO.
++
++	  If unsure, say N.
++
+ config ATA_ACPI
+ 	bool "ATA ACPI Support"
+ 	depends on ACPI
+--- a/drivers/ata/libata-core.c
++++ b/drivers/ata/libata-core.c
+@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
+ 	return block;
+ }
+ 
++#ifdef CONFIG_ATA_LEDS
++#define LIBATA_BLINK_DELAY 20 /* ms */
++static inline void ata_led_act(struct ata_port *ap)
++{
++	unsigned long led_delay = LIBATA_BLINK_DELAY;
++
++	if (unlikely(!ap->ledtrig))
++		return;
++
++	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
++}
++#endif
++
+ /**
+  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
+  *	@tf: Target ATA taskfile
+@@ -4963,6 +4976,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+ 		if (tag < 0)
+ 			return NULL;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	ata_led_act(ap);
++#endif
+ 
+ 	qc = __ata_qc_from_tag(ap, tag);
+ 	qc->tag = tag;
+@@ -5865,6 +5881,9 @@ struct ata_port *ata_port_alloc(struct a
+ 	ap->stats.unhandled_irq = 1;
+ 	ap->stats.idle_irq = 1;
+ #endif
++#ifdef CONFIG_ATA_LEDS
++	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
++#endif
+ 	ata_sff_port_init(ap);
+ 
+ 	return ap;
+@@ -5886,6 +5905,12 @@ static void ata_host_release(struct devi
+ 
+ 		kfree(ap->pmp_link);
+ 		kfree(ap->slave_link);
++#ifdef CONFIG_ATA_LEDS
++		if (ap->ledtrig) {
++			led_trigger_unregister(ap->ledtrig);
++			kfree(ap->ledtrig);
++		};
++#endif
+ 		kfree(ap);
+ 		host->ports[i] = NULL;
+ 	}
+@@ -6332,7 +6357,23 @@ int ata_host_register(struct ata_host *h
+ 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
+ 		host->ports[i]->local_port_no = i + 1;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	for (i = 0; i < host->n_ports; i++) {
++		if (unlikely(!host->ports[i]->ledtrig))
++			continue;
+ 
++		snprintf(host->ports[i]->ledtrig_name,
++			sizeof(host->ports[i]->ledtrig_name), "ata%u",
++			host->ports[i]->print_id);
++
++		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
++
++		if (led_trigger_register(host->ports[i]->ledtrig)) {
++			kfree(host->ports[i]->ledtrig);
++			host->ports[i]->ledtrig = NULL;
++		}
++	}
++#endif
+ 	/* Create associated sysfs transport objects  */
+ 	for (i = 0; i < host->n_ports; i++) {
+ 		rc = ata_tport_add(host->dev,host->ports[i]);
+--- a/include/linux/libata.h
++++ b/include/linux/libata.h
+@@ -38,6 +38,9 @@
+ #include <linux/acpi.h>
+ #include <linux/cdrom.h>
+ #include <linux/sched.h>
++#ifdef CONFIG_ATA_LEDS
++#include <linux/leds.h>
++#endif
+ 
+ /*
+  * Define if arch has non-standard setup.  This is a _PCI_ standard
+@@ -883,6 +886,12 @@ struct ata_port {
+ #ifdef CONFIG_ATA_ACPI
+ 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
+ #endif
++
++#ifdef CONFIG_ATA_LEDS
++	struct led_trigger	*ledtrig;
++	char			ledtrig_name[8];
++#endif
++
+ 	/* owned by EH */
+ 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
+ };