kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 275 insertions, 0 deletions

diff --git a/target/linux/generic/pending-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch b/target/linux/generic/pending-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch
new file mode 100644
index 0000000000..794753ffa3
--- /dev/null
+++ b/target/linux/generic/pending-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch
@@ -0,0 +1,275 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH 2/2] net: phy: pick Broadcom drivers updates from net-next for
+ 4.11
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/net/phy/bcm7xxx.c
++++ b/drivers/net/phy/bcm7xxx.c
+@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
+ 	return 0;
+ }
+ 
++static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
++{
++	/* +1 RC_CAL codes for RL centering for both LT and HT conditions */
++	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
++
++	/* Cut master bias current by 2% to compensate for RC_CAL offset */
++	bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
++
++	/* Improve hybrid leakage */
++	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
++
++	/* Change rx_on_tune 8 to 0xf */
++	bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
++
++	/* Change 100Tx EEE bandwidth */
++	bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
++
++	/* Enable ffe zero detection for Vitesse interoperability */
++	bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
++
++	r_rc_cal_reset(phydev);
++
++	return 0;
++}
++
+ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+ {
+ 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ 	u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ 	int ret = 0;
+ 
++	/* Newer devices have moved the revision information back into a
++	 * standard location in MII_PHYS_ID[23]
++	 */
++	if (rev == 0)
++		rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
++
+ 	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+ 		     dev_name(&phydev->dev), phydev->drv->name, rev, patch);
+ 
+@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
+ 	case 0x10:
+ 		ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
+ 		break;
++	case 0x01:
++		ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
++		break;
+ 	default:
+ 		break;
+ 	}
+@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de
+ 
+ static struct phy_driver bcm7xxx_driver[] = {
+ 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
++	BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
+ 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[
+ 
+ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ 	{ PHY_ID_BCM7250, 0xfffffff0, },
++	{ PHY_ID_BCM7278, 0xfffffff0, },
+ 	{ PHY_ID_BCM7364, 0xfffffff0, },
+ 	{ PHY_ID_BCM7366, 0xfffffff0, },
+ 	{ PHY_ID_BCM7346, 0xfffffff0, },
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -30,6 +30,50 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
+ MODULE_AUTHOR("Maciej W. Rozycki");
+ MODULE_LICENSE("GPL");
+ 
++static int bcm54210e_config_init(struct phy_device *phydev)
++{
++	int val;
++
++	val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
++	val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
++	val |= MII_BCM54XX_AUXCTL_MISC_WREN;
++	bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
++
++	val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
++	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
++	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
++
++	return 0;
++}
++
++static int bcm54612e_config_init(struct phy_device *phydev)
++{
++	/* Clear TX internal delay unless requested. */
++	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
++	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
++		/* Disable TXD to GTXCLK clock delay (default set) */
++		/* Bit 9 is the only field in shadow register 00011 */
++		bcm_phy_write_shadow(phydev, 0x03, 0);
++	}
++
++	/* Clear RX internal delay unless requested. */
++	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
++	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
++		u16 reg;
++
++		reg = bcm54xx_auxctl_read(phydev,
++					  MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
++		/* Disable RXD to RXC delay (default set) */
++		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
++		/* Clear shadow selector field */
++		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
++		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
++				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
++	}
++
++	return 0;
++}
++
+ static int bcm54810_config(struct phy_device *phydev)
+ {
+ 	int rc, val;
+@@ -230,7 +274,15 @@ static int bcm54xx_config_init(struct ph
+ 	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+ 		bcm54xx_adjust_rxrefclk(phydev);
+ 
+-	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
++	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
++		err = bcm54210e_config_init(phydev);
++		if (err)
++			return err;
++	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
++		err = bcm54612e_config_init(phydev);
++		if (err)
++			return err;
++	} else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
+ 		err = bcm54810_config(phydev);
+ 		if (err)
+ 			return err;
+@@ -375,41 +427,6 @@ static int bcm5481_config_aneg(struct ph
+ 	return ret;
+ }
+ 
+-static int bcm54612e_config_aneg(struct phy_device *phydev)
+-{
+-	int ret;
+-
+-	/* First, auto-negotiate. */
+-	ret = genphy_config_aneg(phydev);
+-
+-	/* Clear TX internal delay unless requested. */
+-	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+-	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
+-		/* Disable TXD to GTXCLK clock delay (default set) */
+-		/* Bit 9 is the only field in shadow register 00011 */
+-		bcm_phy_write_shadow(phydev, 0x03, 0);
+-	}
+-
+-	/* Clear RX internal delay unless requested. */
+-	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+-	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+-		u16 reg;
+-
+-		/* Errata: reads require filling in the write selector field */
+-		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+-				     MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
+-		reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+-		/* Disable RXD to RXC delay (default set) */
+-		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
+-		/* Clear shadow selector field */
+-		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+-		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+-				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
+-	}
+-
+-	return ret;
+-}
+-
+ static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
+ {
+ 	int val;
+@@ -548,6 +565,19 @@ static struct phy_driver broadcom_driver
+ 	.config_intr	= bcm_phy_config_intr,
+ 	.driver		= { .owner = THIS_MODULE },
+ }, {
++	.phy_id		= PHY_ID_BCM54210E,
++	.phy_id_mask	= 0xfffffff0,
++	.name		= "Broadcom BCM54210E",
++	.features	= PHY_GBIT_FEATURES |
++			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
++	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
++	.config_init	= bcm54xx_config_init,
++	.config_aneg	= genphy_config_aneg,
++	.read_status	= genphy_read_status,
++	.ack_interrupt	= bcm_phy_ack_intr,
++	.config_intr	= bcm_phy_config_intr,
++	.driver		= { .owner = THIS_MODULE },
++}, {
+ 	.phy_id		= PHY_ID_BCM5461,
+ 	.phy_id_mask	= 0xfffffff0,
+ 	.name		= "Broadcom BCM5461",
+@@ -568,7 +598,7 @@ static struct phy_driver broadcom_driver
+ 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ 	.config_init	= bcm54xx_config_init,
+-	.config_aneg	= bcm54612e_config_aneg,
++	.config_aneg	= genphy_config_aneg,
+ 	.read_status	= genphy_read_status,
+ 	.ack_interrupt	= bcm_phy_ack_intr,
+ 	.config_intr	= bcm_phy_config_intr,
+@@ -708,6 +738,7 @@ module_phy_driver(broadcom_drivers);
+ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
+ 	{ PHY_ID_BCM5411, 0xfffffff0 },
+ 	{ PHY_ID_BCM5421, 0xfffffff0 },
++	{ PHY_ID_BCM54210E, 0xfffffff0 },
+ 	{ PHY_ID_BCM5461, 0xfffffff0 },
+ 	{ PHY_ID_BCM54612E, 0xfffffff0 },
+ 	{ PHY_ID_BCM54616S, 0xfffffff0 },
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -17,6 +17,7 @@
+ #define PHY_ID_BCM5482			0x0143bcb0
+ #define PHY_ID_BCM5411			0x00206070
+ #define PHY_ID_BCM5421			0x002060e0
++#define PHY_ID_BCM54210E		0x600d84a0
+ #define PHY_ID_BCM5464			0x002060b0
+ #define PHY_ID_BCM5461			0x002060c0
+ #define PHY_ID_BCM54612E		0x03625e60
+@@ -24,6 +25,7 @@
+ #define PHY_ID_BCM57780			0x03625d90
+ 
+ #define PHY_ID_BCM7250			0xae025280
++#define PHY_ID_BCM7278			0xae0251a0
+ #define PHY_ID_BCM7364			0xae025260
+ #define PHY_ID_BCM7366			0x600d8490
+ #define PHY_ID_BCM7346			0x600d8650
+@@ -103,18 +105,17 @@
+ /*
+  * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
+  */
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
++#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x00
+ #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
+ #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
+ 
+-#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
+-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW	0x0100
+-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
+-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	(1 << 8)
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	0x0100
++#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX		0x0200
++#define MII_BCM54XX_AUXCTL_MISC_WREN			0x8000
+ 
++#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT	12
+ #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK	0x0007
+ 
+ /*