diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2018-11-01 18:01:44 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-12-15 14:28:48 +0100 |
commit | 9261e7447ea7b8d33b70ff6ea008f2041a88e255 (patch) | |
tree | c9af04326ac9953a33fc8fd3e852c11fc1eb4df3 /target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch | |
parent | 52a82ce3dd901a1536c7d7d9d963e9c2d761c816 (diff) | |
download | upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.gz upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.bz2 upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.zip |
kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.
The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.
The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch
Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.
The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch
This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch')
-rw-r--r-- | target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch index 27bbf572e9..e56e77addf 100644 --- a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch +++ b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch @@ -40,15 +40,15 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E -@@ -74,6 +81,7 @@ MODULE_LICENSE("GPL"); +@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL"); + struct at803x_priv { bool phy_reset:1; - struct gpio_desc *gpiod_reset; + int prev_speed; }; struct at803x_context { -@@ -274,8 +282,16 @@ does_not_require_reset_workaround: +@@ -249,8 +257,16 @@ static int at803x_probe(struct phy_devic return 0; } @@ -65,7 +65,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> int ret; ret = genphy_config_init(phydev); -@@ -296,6 +312,26 @@ static int at803x_config_init(struct phy +@@ -271,6 +287,26 @@ static int at803x_config_init(struct phy return ret; } @@ -92,7 +92,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> return 0; } -@@ -333,6 +369,8 @@ static int at803x_config_intr(struct phy +@@ -308,6 +344,8 @@ static int at803x_config_intr(struct phy static void at803x_link_change_notify(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; @@ -101,7 +101,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * Conduct a hardware reset for AT8030/2 every time a link loss is -@@ -361,6 +399,24 @@ static void at803x_link_change_notify(st +@@ -336,6 +374,24 @@ static void at803x_link_change_notify(st } else { priv->phy_reset = false; } |