aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2018-11-01 18:01:44 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2018-12-15 14:28:48 +0100
commit9261e7447ea7b8d33b70ff6ea008f2041a88e255 (patch)
treec9af04326ac9953a33fc8fd3e852c11fc1eb4df3 /target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
parent52a82ce3dd901a1536c7d7d9d963e9c2d761c816 (diff)
downloadupstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.gz
upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.bz2
upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.zip
kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch')
-rw-r--r--target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch28
1 files changed, 14 insertions, 14 deletions
diff --git a/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
index 7c60d7e799..40f7962b67 100644
--- a/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ b/target/linux/generic/pending-4.19/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
@@ -156,7 +156,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (dev == ip6n->fb_tnl_dev)
RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
else
-@@ -779,6 +796,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
+@@ -772,6 +789,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
}
EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
@@ -264,7 +264,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
const struct tnl_ptk_info *tpi,
struct metadata_dst *tun_dst,
-@@ -831,6 +949,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
+@@ -824,6 +942,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
skb_reset_network_header(skb);
memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
@@ -292,7 +292,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -962,6 +1101,7 @@ static void init_tel_txopt(struct ipv6_t
+@@ -955,6 +1094,7 @@ static void init_tel_txopt(struct ipv6_t
opt->ops.opt_nflen = 8;
}
@@ -300,7 +300,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
/**
* ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
* @t: the outgoing tunnel device
-@@ -1305,6 +1445,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1312,6 +1452,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
{
struct ip6_tnl *t = netdev_priv(dev);
struct ipv6hdr *ipv6h;
@@ -308,7 +308,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
int encap_limit = -1;
__u16 offset;
struct flowi6 fl6;
-@@ -1371,6 +1512,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1379,6 +1520,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
@@ -327,7 +327,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
-@@ -1499,6 +1652,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+@@ -1507,6 +1660,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
t->parms.link = p->link;
t->parms.proto = p->proto;
t->parms.fwmark = p->fwmark;
@@ -342,7 +342,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
dst_cache_reset(&t->dst_cache);
ip6_tnl_link_config(t);
return 0;
-@@ -1537,6 +1698,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+@@ -1545,6 +1706,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
p->flowinfo = u->flowinfo;
p->link = u->link;
p->proto = u->proto;
@@ -350,7 +350,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
memcpy(p->name, u->name, sizeof(u->name));
}
-@@ -1923,6 +2085,15 @@ static int ip6_tnl_validate(struct nlatt
+@@ -1931,6 +2093,15 @@ static int ip6_tnl_validate(struct nlatt
return 0;
}
@@ -366,7 +366,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
static void ip6_tnl_netlink_parms(struct nlattr *data[],
struct __ip6_tnl_parm *parms)
{
-@@ -1960,6 +2131,46 @@ static void ip6_tnl_netlink_parms(struct
+@@ -1968,6 +2139,46 @@ static void ip6_tnl_netlink_parms(struct
if (data[IFLA_IPTUN_FWMARK])
parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
@@ -413,7 +413,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
}
static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2075,6 +2286,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -2083,6 +2294,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
@@ -426,7 +426,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
-@@ -2104,6 +2321,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -2112,6 +2329,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(0) +
/* IFLA_IPTUN_FWMARK */
nla_total_size(4) +
@@ -451,7 +451,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
0;
}
-@@ -2111,6 +2346,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2119,6 +2354,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
@@ -461,7 +461,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2120,9 +2358,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2128,9 +2366,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
@@ -490,7 +490,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2162,6 +2418,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -2170,6 +2426,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },
[IFLA_IPTUN_FWMARK] = { .type = NLA_U32 },