diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2018-11-01 18:01:44 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-12-15 14:28:48 +0100 |
commit | 9261e7447ea7b8d33b70ff6ea008f2041a88e255 (patch) | |
tree | c9af04326ac9953a33fc8fd3e852c11fc1eb4df3 /target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch | |
parent | 52a82ce3dd901a1536c7d7d9d963e9c2d761c816 (diff) | |
download | upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.gz upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.bz2 upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.zip |
kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.
The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.
The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch
Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.
The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch
This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch')
-rw-r--r-- | target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch | 16 |
1 files changed, 3 insertions, 13 deletions
diff --git a/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch index 828b160be9..e496301e4e 100644 --- a/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch +++ b/target/linux/generic/pending-4.19/180-net-phy-at803x-add-support-for-AT8032.patch @@ -19,17 +19,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> MODULE_DESCRIPTION("Atheros 803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); -@@ -256,7 +258,8 @@ static int at803x_probe(struct phy_devic - if (!priv) - return -ENOMEM; - -- if (phydev->drv->phy_id != ATH8030_PHY_ID) -+ if (phydev->drv->phy_id != ATH8030_PHY_ID && -+ phydev->drv->phy_id != ATH8032_PHY_ID) - goto does_not_require_reset_workaround; - - gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); -@@ -332,7 +335,7 @@ static void at803x_link_change_notify(st +@@ -308,7 +310,7 @@ static void at803x_link_change_notify(st struct at803x_priv *priv = phydev->priv; /* @@ -38,7 +28,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> * signalled. This is necessary to circumvent a hardware bug that * occurs when the cable is unplugged while TX packets are pending * in the FIFO. In such cases, the FIFO enters an error mode it -@@ -444,6 +447,24 @@ static struct phy_driver at803x_driver[] +@@ -414,6 +416,24 @@ static struct phy_driver at803x_driver[] .aneg_done = at803x_aneg_done, .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, @@ -63,7 +53,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> } }; module_phy_driver(at803x_driver); -@@ -451,6 +472,7 @@ module_phy_driver(at803x_driver); +@@ -421,6 +441,7 @@ module_phy_driver(at803x_driver); static struct mdio_device_id __maybe_unused atheros_tbl[] = { { ATH8030_PHY_ID, AT803X_PHY_ID_MASK }, { ATH8031_PHY_ID, AT803X_PHY_ID_MASK }, |