diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2018-11-01 18:01:44 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-12-15 14:28:48 +0100 |
commit | 9261e7447ea7b8d33b70ff6ea008f2041a88e255 (patch) | |
tree | c9af04326ac9953a33fc8fd3e852c11fc1eb4df3 /target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch | |
parent | 52a82ce3dd901a1536c7d7d9d963e9c2d761c816 (diff) | |
download | upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.gz upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.bz2 upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.zip |
kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.
The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.
The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch
Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.
The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch
This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch')
-rw-r--r-- | target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch index b45b1c079c..cad00b5527 100644 --- a/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch +++ b/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch @@ -17,7 +17,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c -@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd +@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd "USB %x.%x started, EHCI %x.%02x%s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), temp >> 8, temp & 0xff, @@ -28,7 +28,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> &ehci->regs->intr_enable); /* Turn On Interrupts */ --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c -@@ -646,7 +646,7 @@ ehci_hub_status_data (struct usb_hcd *hc +@@ -641,7 +641,7 @@ ehci_hub_status_data (struct usb_hcd *hc * always set, seem to clear PORT_OCC and PORT_CSC when writing to * PORT_POWER; that's surprising, but maybe within-spec. */ @@ -37,7 +37,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> mask = PORT_CSC | PORT_PEC | PORT_OCC; else mask = PORT_CSC | PORT_PEC; -@@ -1016,7 +1016,7 @@ int ehci_hub_control( +@@ -1011,7 +1011,7 @@ int ehci_hub_control( if (temp & PORT_PEC) status |= USB_PORT_STAT_C_ENABLE << 16; @@ -48,7 +48,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> /* --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c -@@ -263,6 +263,8 @@ static int ehci_platform_probe(struct pl +@@ -208,6 +208,8 @@ static int ehci_platform_probe(struct pl hcd->has_tt = 1; if (pdata->reset_on_resume) priv->reset_on_resume = true; @@ -59,7 +59,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> if (ehci->big_endian_mmio) { --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h -@@ -231,6 +231,7 @@ struct ehci_hcd { /* one per controlle +@@ -218,6 +218,7 @@ struct ehci_hcd { /* one per controlle unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ unsigned need_oc_pp_cycle:1; /* MPC834X port power */ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ @@ -69,7 +69,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> #define OHCI_CTRL_HCFS (3 << 6) --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h -@@ -49,6 +49,7 @@ struct usb_ehci_pdata { +@@ -50,6 +50,7 @@ struct usb_ehci_pdata { unsigned no_io_watchdog:1; unsigned reset_on_resume:1; unsigned dma_mask_64:1; |