kernel: Copy patches from kernel 4.14 to 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 79 insertions, 0 deletions

diff --git a/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch
new file mode 100644
index 0000000000..b45b1c079c
--- /dev/null
+++ b/target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch
@@ -0,0 +1,79 @@
+From: Florian Fainelli <florian@openwrt.org>
+Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
+
+This patch adds an ignore_oc flag which can be set by EHCI controller
+not supporting or wanting to disable overcurrent checking. The EHCI
+platform data in include/linux/usb/ehci_pdriver.h is also augmented to
+take advantage of this new flag.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      |    2 +-
+ drivers/usb/host/ehci-hub.c      |    4 ++--
+ drivers/usb/host/ehci-platform.c |    1 +
+ drivers/usb/host/ehci.h          |    1 +
+ include/linux/usb/ehci_pdriver.h |    1 +
+ 5 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
+ 		"USB %x.%x started, EHCI %x.%02x%s\n",
+ 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ 		temp >> 8, temp & 0xff,
+-		ignore_oc ? ", overcurrent ignored" : "");
++		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
+ 
+ 	ehci_writel(ehci, INTR_MASK,
+ 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -646,7 +646,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+ 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ 	 * PORT_POWER; that's surprising, but maybe within-spec.
+ 	 */
+-	if (!ignore_oc)
++	if (!ignore_oc && !ehci->ignore_oc)
+ 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ 	else
+ 		mask = PORT_CSC | PORT_PEC;
+@@ -1016,7 +1016,7 @@ int ehci_hub_control(
+ 		if (temp & PORT_PEC)
+ 			status |= USB_PORT_STAT_C_ENABLE << 16;
+ 
+-		if ((temp & PORT_OCC) && !ignore_oc){
++		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
+ 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+ 
+ 			/*
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -263,6 +263,8 @@ static int ehci_platform_probe(struct pl
+ 		hcd->has_tt = 1;
+ 	if (pdata->reset_on_resume)
+ 		priv->reset_on_resume = true;
++	if (pdata->ignore_oc)
++		ehci->ignore_oc = 1;
+ 
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ 	if (ehci->big_endian_mmio) {
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -231,6 +231,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
+ 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+ 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
++	unsigned		ignore_oc:1;
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
+ 	unsigned	no_io_watchdog:1;
+ 	unsigned	reset_on_resume:1;
+ 	unsigned	dma_mask_64:1;
++	unsigned	ignore_oc:1;
+ 
+ 	/* Turn on all power and clocks */
+ 	int (*power_on)(struct platform_device *pdev);