kernel: generic: Add kernel 4.14 support

This adds initial support for kernel 4.14 based on the patches for
kernel 4.9.

In the configuration I deactivated some of the new possible security
features like:
CONFIG_REFCOUNT_FULL
CONFIG_SLAB_FREELIST_HARDENED
CONFIG_SOFTLOCKUP_DETECTOR
CONFIG_WARN_ALL_UNSEEDED_RANDOM

And these overlay FS options are also deactivated:
CONFIG_OVERLAY_FS_INDEX
CONFIG_OVERLAY_FS_REDIRECT_DIR

I activated this:
CONFIG_FORTIFY_SOURCE
CONFIG_POSIX_TIMERS
CONFIG_SLAB_MERGE_DEFAULT
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED

I am not sure if I did the porting correct for the following patches:
target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch
target/linux/generic/hack-4.14/220-gc_sections.patch
target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch
target/linux/generic/pending-4.14/305-mips_module_reloc.patch
target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch
target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

85 files changed, 11725 insertions, 0 deletions

diff --git a/target/linux/generic/pending-4.14/100-MIPS-fix-cache-flushing-for-highmem-pages.patch b/target/linux/generic/pending-4.14/100-MIPS-fix-cache-flushing-for-highmem-pages.patch
new file mode 100644
index 0000000000..b1c65f7cd8
--- /dev/null
+++ b/target/linux/generic/pending-4.14/100-MIPS-fix-cache-flushing-for-highmem-pages.patch
@@ -0,0 +1,30 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: MIPS: fix cache flushing for highmem pages
+
+Most cache flush ops were no-op for highmem pages. This led to nasty
+segfaults and (in the case of page_address(page) == NULL) kernel
+crashes.
+
+Fix this by always flushing highmem pages using kmap/kunmap_atomic
+around the actual cache flush. This might be a bit inefficient, but at
+least it's stable.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -116,6 +116,13 @@ void __flush_anon_page(struct page *page
+ {
+ 	unsigned long addr = (unsigned long) page_address(page);
+ 
++	if (PageHighMem(page)) {
++		addr = (unsigned long)kmap_atomic(page);
++		flush_data_cache_page(addr);
++		__kunmap_atomic((void *)addr);
++		return;
++	}
++
+ 	if (pages_do_alias(addr, vmaddr)) {
+ 		if (page_mapcount(page) && !Page_dcache_dirty(page)) {
+ 			void *kaddr;
diff --git a/target/linux/generic/pending-4.14/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-4.14/110-ehci_hcd_ignore_oc.patch
new file mode 100644
index 0000000000..b45b1c079c
--- /dev/null
+++ b/target/linux/generic/pending-4.14/110-ehci_hcd_ignore_oc.patch
@@ -0,0 +1,79 @@
+From: Florian Fainelli <florian@openwrt.org>
+Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
+
+This patch adds an ignore_oc flag which can be set by EHCI controller
+not supporting or wanting to disable overcurrent checking. The EHCI
+platform data in include/linux/usb/ehci_pdriver.h is also augmented to
+take advantage of this new flag.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      |    2 +-
+ drivers/usb/host/ehci-hub.c      |    4 ++--
+ drivers/usb/host/ehci-platform.c |    1 +
+ drivers/usb/host/ehci.h          |    1 +
+ include/linux/usb/ehci_pdriver.h |    1 +
+ 5 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
+ 		"USB %x.%x started, EHCI %x.%02x%s\n",
+ 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ 		temp >> 8, temp & 0xff,
+-		ignore_oc ? ", overcurrent ignored" : "");
++		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
+ 
+ 	ehci_writel(ehci, INTR_MASK,
+ 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -646,7 +646,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+ 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ 	 * PORT_POWER; that's surprising, but maybe within-spec.
+ 	 */
+-	if (!ignore_oc)
++	if (!ignore_oc && !ehci->ignore_oc)
+ 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ 	else
+ 		mask = PORT_CSC | PORT_PEC;
+@@ -1016,7 +1016,7 @@ int ehci_hub_control(
+ 		if (temp & PORT_PEC)
+ 			status |= USB_PORT_STAT_C_ENABLE << 16;
+ 
+-		if ((temp & PORT_OCC) && !ignore_oc){
++		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
+ 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+ 
+ 			/*
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -263,6 +263,8 @@ static int ehci_platform_probe(struct pl
+ 		hcd->has_tt = 1;
+ 	if (pdata->reset_on_resume)
+ 		priv->reset_on_resume = true;
++	if (pdata->ignore_oc)
++		ehci->ignore_oc = 1;
+ 
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ 	if (ehci->big_endian_mmio) {
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -231,6 +231,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
+ 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+ 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
++	unsigned		ignore_oc:1;
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
+ 	unsigned	no_io_watchdog:1;
+ 	unsigned	reset_on_resume:1;
+ 	unsigned	dma_mask_64:1;
++	unsigned	ignore_oc:1;
+ 
+ 	/* Turn on all power and clocks */
+ 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
new file mode 100644
index 0000000000..fbf9981384
--- /dev/null
+++ b/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
@@ -0,0 +1,82 @@
+From: Tobias Wolf <dev-NTEO@vplace.de>
+Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
+
+An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
+kernel beyond version 4.3 resulting in:
+
+BUG: Bad page state in process swapper  pfn:086ac
+
+bisect resulted in:
+
+a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
+commit a1c34a3bf00af2cede839879502e12dc68491ad5
+Author: Laura Abbott <laura@labbott.name>
+Date:   Thu Nov 5 18:48:46 2015 -0800
+
+    mm: Don't offset memmap for flatmem
+
+    Srinivas Kandagatla reported bad page messages when trying to remove the
+    bottom 2MB on an ARM based IFC6410 board
+
+      BUG: Bad page state in process swapper  pfn:fffa8
+      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
+      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
+      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
+      bad because of flags:
+      flags: 0x200041(locked|active|mlocked)
+      Modules linked in:
+      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
+#816
+      Hardware name: Qualcomm (Flattened Device Tree)
+        unwind_backtrace
+        show_stack
+        dump_stack
+        bad_page
+        free_pages_prepare
+        free_hot_cold_page
+        __free_pages
+        free_highmem_page
+        mem_init
+        start_kernel
+      Disabling lock debugging due to kernel taint
+    [...]
+:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
+0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
+
+This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
+page_to_pfn anymore.
+
+The following output was generated with two hacked in printk statements:
+
+printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
+(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
+		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
+printk("after %p\n", mem_map);
+
+Output:
+
+[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
+[    0.000000] after 8851b280
+
+As seen in the first line mem_map with subtraction of offset does not equal the
+mem_map after subtraction of ARCH_PFN_OFFSET.
+
+After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
+previously calculated offset is zero for the named platform it is able to boot
+4.4 and 4.9-rc7 again.
+
+Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
+---
+
+--- a/mm/page_alloc.c
++++ b/mm/page_alloc.c
+@@ -6170,7 +6170,7 @@ static void __ref alloc_node_mem_map(str
+ 		mem_map = NODE_DATA(0)->node_mem_map;
+ #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
+ 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
+-			mem_map -= offset;
++			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
+ #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+ 	}
+ #endif
diff --git a/target/linux/generic/pending-4.14/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-4.14/130-add-linux-spidev-compatible-si3210.patch
new file mode 100644
index 0000000000..b00fb8ee2e
--- /dev/null
+++ b/target/linux/generic/pending-4.14/130-add-linux-spidev-compatible-si3210.patch
@@ -0,0 +1,18 @@
+From: Giuseppe Lippolis <giu.lippolis@gmail.com>
+Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
+
+Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
+---
+ drivers/spi/spidev.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/spi/spidev.c
++++ b/drivers/spi/spidev.c
+@@ -669,6 +669,7 @@ static const struct of_device_id spidev_
+ 	{ .compatible = "lineartechnology,ltc2488" },
+ 	{ .compatible = "ge,achc" },
+ 	{ .compatible = "semtech,sx1301" },
++	{ .compatible = "siliconlabs,si3210" },
+ 	{},
+ };
+ MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-4.14/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch b/target/linux/generic/pending-4.14/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
new file mode 100644
index 0000000000..9603385aed
--- /dev/null
+++ b/target/linux/generic/pending-4.14/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: spi: use gpio_set_value_cansleep for setting chipselect GPIO
+
+Sleeping is safe inside spi_transfer_one_message, and some GPIO chips
+need to sleep for setting values
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/spi/spi.c
++++ b/drivers/spi/spi.c
+@@ -729,7 +729,7 @@ static void spi_set_cs(struct spi_device
+ 		enable = !enable;
+ 
+ 	if (gpio_is_valid(spi->cs_gpio)) {
+-		gpio_set_value(spi->cs_gpio, !enable);
++		gpio_set_value_cansleep(spi->cs_gpio, !enable);
+ 		/* Some SPI masters need both GPIO CS & slave_select */
+ 		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
+ 		    spi->controller->set_cs)
diff --git a/target/linux/generic/pending-4.14/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-4.14/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
new file mode 100644
index 0000000000..b9bb3f71f1
--- /dev/null
+++ b/target/linux/generic/pending-4.14/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
@@ -0,0 +1,62 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
+
+It is required for renames on overlayfs
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/fs/jffs2/dir.c
++++ b/fs/jffs2/dir.c
+@@ -756,6 +756,24 @@ static int jffs2_mknod (struct inode *di
+ 	return ret;
+ }
+ 
++static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
++{
++	struct dentry *wh;
++	int err;
++
++	wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
++	if (!wh)
++		return -ENOMEM;
++
++	err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
++			  WHITEOUT_DEV);
++	if (err)
++		return err;
++
++	d_rehash(wh);
++	return 0;
++}
++
+ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
+ 			 struct inode *new_dir_i, struct dentry *new_dentry,
+ 			 unsigned int flags)
+@@ -766,7 +784,7 @@ static int jffs2_rename (struct inode *o
+ 	uint8_t type;
+ 	uint32_t now;
+ 
+-	if (flags & ~RENAME_NOREPLACE)
++	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
+ 		return -EINVAL;
+ 
+ 	/* The VFS will check for us and prevent trying to rename a
+@@ -832,9 +850,14 @@ static int jffs2_rename (struct inode *o
+ 	if (d_is_dir(old_dentry) && !victim_f)
+ 		inc_nlink(new_dir_i);
+ 
+-	/* Unlink the original */
+-	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
+-			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
++	if (flags & RENAME_WHITEOUT)
++		/* Replace with whiteout */
++		ret = jffs2_whiteout(old_dir_i, old_dentry);
++	else
++		/* Unlink the original */
++		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
++				      old_dentry->d_name.name,
++				      old_dentry->d_name.len, NULL, now);
+ 
+ 	/* We don't touch inode->i_nlink */
+ 
diff --git a/target/linux/generic/pending-4.14/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-4.14/141-jffs2-add-RENAME_EXCHANGE-support.patch
new file mode 100644
index 0000000000..4b30bc7cd0
--- /dev/null
+++ b/target/linux/generic/pending-4.14/141-jffs2-add-RENAME_EXCHANGE-support.patch
@@ -0,0 +1,73 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: jffs2: add RENAME_EXCHANGE support
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/fs/jffs2/dir.c
++++ b/fs/jffs2/dir.c
+@@ -781,18 +781,31 @@ static int jffs2_rename (struct inode *o
+ 	int ret;
+ 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
+ 	struct jffs2_inode_info *victim_f = NULL;
++	struct inode *fst_inode = d_inode(old_dentry);
++	struct inode *snd_inode = d_inode(new_dentry);
+ 	uint8_t type;
+ 	uint32_t now;
+ 
+-	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
++	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
+ 		return -EINVAL;
+ 
++	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
++		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
++			inc_nlink(new_dir_i);
++			drop_nlink(old_dir_i);
++		}
++		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
++			drop_nlink(new_dir_i);
++			inc_nlink(old_dir_i);
++		}
++	}
++
+ 	/* The VFS will check for us and prevent trying to rename a
+ 	 * file over a directory and vice versa, but if it's a directory,
+ 	 * the VFS can't check whether the victim is empty. The filesystem
+ 	 * needs to do that for itself.
+ 	 */
+-	if (d_really_is_positive(new_dentry)) {
++	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
+ 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
+ 		if (d_is_dir(new_dentry)) {
+ 			struct jffs2_full_dirent *fd;
+@@ -827,7 +840,7 @@ static int jffs2_rename (struct inode *o
+ 	if (ret)
+ 		return ret;
+ 
+-	if (victim_f) {
++	if (victim_f && !(flags & RENAME_EXCHANGE)) {
+ 		/* There was a victim. Kill it off nicely */
+ 		if (d_is_dir(new_dentry))
+ 			clear_nlink(d_inode(new_dentry));
+@@ -853,6 +866,12 @@ static int jffs2_rename (struct inode *o
+ 	if (flags & RENAME_WHITEOUT)
+ 		/* Replace with whiteout */
+ 		ret = jffs2_whiteout(old_dir_i, old_dentry);
++	else if (flags & RENAME_EXCHANGE)
++		/* Replace the original */
++		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
++				    d_inode(new_dentry)->i_ino, type,
++				    old_dentry->d_name.name, old_dentry->d_name.len,
++				    now);
+ 	else
+ 		/* Unlink the original */
+ 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
+@@ -884,7 +903,7 @@ static int jffs2_rename (struct inode *o
+ 		return ret;
+ 	}
+ 
+-	if (d_is_dir(old_dentry))
++	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
+ 		drop_nlink(old_dir_i);
+ 
+ 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch
new file mode 100644
index 0000000000..03267310a0
--- /dev/null
+++ b/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch
@@ -0,0 +1,43 @@
+From: Stephen Hemminger <stephen@networkplumber.org>
+Subject: bridge: allow receiption on disabled port
+
+When an ethernet device is enslaved to a bridge, and the bridge STP
+detects loss of carrier (or operational state down), then normally
+packet receiption is blocked.
+
+This breaks control applications like WPA which maybe expecting to
+receive packets to negotiate to bring link up. The bridge needs to
+block forwarding packets from these disabled ports, but there is no
+hard requirement to not allow local packet delivery.
+
+Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -238,7 +238,8 @@ static int br_handle_local_finish(struct
+ {
+ 	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
+ 
+-	__br_handle_local_finish(skb);
++	if (p->state != BR_STATE_DISABLED)
++		__br_handle_local_finish(skb);
+ 
+ 	BR_INPUT_SKB_CB(skb)->brdev = p->br->dev;
+ 	br_pass_frame_up(skb);
+@@ -326,6 +327,15 @@ rx_handler_result_t br_handle_frame(stru
+ 
+ forward:
+ 	switch (p->state) {
++	case BR_STATE_DISABLED:
++		if (ether_addr_equal(p->br->dev->dev_addr, dest))
++			skb->pkt_type = PACKET_HOST;
++
++		NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
++			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
++			br_handle_local_finish);
++		break;
++
+ 	case BR_STATE_FORWARDING:
+ 		rhook = rcu_dereference(br_should_route_hook);
+ 		if (rhook) {
diff --git a/target/linux/generic/pending-4.14/160-mtd-part-add-generic-parsing-of-linux-part-probe.patch b/target/linux/generic/pending-4.14/160-mtd-part-add-generic-parsing-of-linux-part-probe.patch
new file mode 100644
index 0000000000..2706f13dc9
--- /dev/null
+++ b/target/linux/generic/pending-4.14/160-mtd-part-add-generic-parsing-of-linux-part-probe.patch
@@ -0,0 +1,161 @@
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Subject: mtd: part: add generic parsing of linux,part-probe
+
+This moves the linux,part-probe device tree parsing code from
+physmap_of.c to mtdpart.c. Now all drivers can use this feature by just
+providing a reference to their device tree node in struct
+mtd_part_parser_data.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ Documentation/devicetree/bindings/mtd/nand.txt | 16 +++++++++
+ drivers/mtd/maps/physmap_of.c                  | 46 +-------------------------
+ drivers/mtd/mtdpart.c                          | 45 +++++++++++++++++++++++++
+ 3 files changed, 62 insertions(+), 45 deletions(-)
+
+--- a/Documentation/devicetree/bindings/mtd/nand.txt
++++ b/Documentation/devicetree/bindings/mtd/nand.txt
+@@ -44,6 +44,22 @@ Optional NAND chip properties:
+ 		     used by the upper layers, and you want to make your NAND
+ 		     as reliable as possible.
+ 
++- linux,part-probe: list of name as strings of the partition parser
++		    which should be used to parse the partition table.
++		    They will be tried in the specified ordering and
++		    the next one will be used if the previous one
++		    failed.
++
++		    Example: linux,part-probe = "cmdlinepart", "ofpart";
++
++		    This is also the default value, which will be used
++		    if this attribute is not specified. It could be
++		    that the flash driver in use overwrote the default
++		    value and uses some other default.
++
++		    Possible values are: bcm47xxpart, afs, ar7part,
++		    ofoldpart, ofpart, bcm63xxpart, RedBoot, cmdlinepart
++
+ The ECC strength and ECC step size properties define the correction capability
+ of a controller. Together, they say a controller can correct "{strength} bit
+ errors per {size} bytes".
+--- a/drivers/mtd/maps/physmap_of_core.c
++++ b/drivers/mtd/maps/physmap_of_core.c
+@@ -114,37 +114,9 @@ static struct mtd_info *obsolete_probe(s
+ static const char * const part_probe_types_def[] = {
+ 	"cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
+ 
+-static const char * const *of_get_probes(struct device_node *dp)
+-{
+-	const char **res;
+-	int count;
+-
+-	count = of_property_count_strings(dp, "linux,part-probe");
+-	if (count < 0)
+-		return part_probe_types_def;
+-
+-	res = kzalloc((count + 1) * sizeof(*res), GFP_KERNEL);
+-	if (!res)
+-		return NULL;
+-
+-	count = of_property_read_string_array(dp, "linux,part-probe", res,
+-					      count);
+-	if (count < 0)
+-		return NULL;
+-
+-	return res;
+-}
+-
+-static void of_free_probes(const char * const *probes)
+-{
+-	if (probes != part_probe_types_def)
+-		kfree(probes);
+-}
+-
+ static const struct of_device_id of_flash_match[];
+ static int of_flash_probe(struct platform_device *dev)
+ {
+-	const char * const *part_probe_types;
+ 	const struct of_device_id *match;
+ 	struct device_node *dp = dev->dev.of_node;
+ 	struct resource res;
+@@ -310,14 +282,8 @@ static int of_flash_probe(struct platfor
+ 
+ 	info->cmtd->dev.parent = &dev->dev;
+ 	mtd_set_of_node(info->cmtd, dp);
+-	part_probe_types = of_get_probes(dp);
+-	if (!part_probe_types) {
+-		err = -ENOMEM;
+-		goto err_out;
+-	}
+-	mtd_device_parse_register(info->cmtd, part_probe_types, NULL,
++	mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL,
+ 			NULL, 0);
+-	of_free_probes(part_probe_types);
+ 
+ 	kfree(mtd_list);
+ 
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -29,6 +29,7 @@
+ #include <linux/kmod.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+ #include <linux/err.h>
+ 
+ #include "mtdcore.h"
+@@ -863,6 +864,32 @@ void deregister_mtd_parser(struct mtd_pa
+ EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+ 
+ /*
++ * Parses the linux,part-probe device tree property.
++ * When a non null value is returned it has to be freed with kfree() by
++ * the caller.
++ */
++static const char * const *of_get_probes(struct device_node *dp)
++{
++	const char **res;
++	int count;
++
++	count = of_property_count_strings(dp, "linux,part-probe");
++	if (count < 0)
++		return NULL;
++
++	res = kzalloc((count + 1) * sizeof(*res), GFP_KERNEL);
++	if (!res)
++		return NULL;
++
++	count = of_property_read_string_array(dp, "linux,part-probe", res,
++					      count);
++	if (count < 0)
++		return NULL;
++
++	return res;
++}
++
++/*
+  * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+  * are changing this array!
+  */
+@@ -920,6 +947,13 @@ int parse_mtd_partitions(struct mtd_info
+ {
+ 	struct mtd_part_parser *parser;
+ 	int ret, err = 0;
++	const char *const *types_of = NULL;
++
++	if (mtd_get_of_node(master)) {
++		types_of = of_get_probes(mtd_get_of_node(master));
++		if (types_of != NULL)
++			types = types_of;
++	}
+ 
+ 	if (!types)
+ 		types = default_mtd_part_types;
+@@ -945,6 +979,7 @@ int parse_mtd_partitions(struct mtd_info
+ 		if (ret < 0 && !err)
+ 			err = ret;
+ 	}
++	kfree(types_of);
+ 	return err;
+ }
+ 
diff --git a/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch
new file mode 100644
index 0000000000..3b1a41a23b
--- /dev/null
+++ b/target/linux/generic/pending-4.14/180-net-phy-at803x-add-support-for-AT8032.patch
@@ -0,0 +1,70 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: phy: at803x: add support for AT8032
+
+Like AT8030, this PHY needs the GPIO reset workaround
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -62,6 +62,7 @@
+ 
+ #define ATH8030_PHY_ID 0x004dd076
+ #define ATH8031_PHY_ID 0x004dd074
++#define ATH8032_PHY_ID 0x004dd023
+ #define ATH8035_PHY_ID 0x004dd072
+ #define AT803X_PHY_ID_MASK			0xffffffef
+ 
+@@ -260,7 +261,8 @@ static int at803x_probe(struct phy_devic
+ 	if (!priv)
+ 		return -ENOMEM;
+ 
+-	if (phydev->drv->phy_id != ATH8030_PHY_ID)
++	if (phydev->drv->phy_id != ATH8030_PHY_ID &&
++	    phydev->drv->phy_id != ATH8032_PHY_ID)
+ 		goto does_not_require_reset_workaround;
+ 
+ 	gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+@@ -336,7 +338,7 @@ static void at803x_link_change_notify(st
+ 	struct at803x_priv *priv = phydev->priv;
+ 
+ 	/*
+-	 * Conduct a hardware reset for AT8030 every time a link loss is
++	 * Conduct a hardware reset for AT8030/2 every time a link loss is
+ 	 * signalled. This is necessary to circumvent a hardware bug that
+ 	 * occurs when the cable is unplugged while TX packets are pending
+ 	 * in the FIFO. In such cases, the FIFO enters an error mode it
+@@ -448,6 +450,24 @@ static struct phy_driver at803x_driver[]
+ 	.aneg_done		= at803x_aneg_done,
+ 	.ack_interrupt		= &at803x_ack_interrupt,
+ 	.config_intr		= &at803x_config_intr,
++}, {
++	/* ATHEROS 8032 */
++	.phy_id			= ATH8032_PHY_ID,
++	.name			= "Atheros 8032 ethernet",
++	.phy_id_mask		= 0xffffffef,
++	.probe			= at803x_probe,
++	.config_init		= at803x_config_init,
++	.link_change_notify	= at803x_link_change_notify,
++	.set_wol		= at803x_set_wol,
++	.get_wol		= at803x_get_wol,
++	.suspend		= at803x_suspend,
++	.resume			= at803x_resume,
++	.features		= PHY_BASIC_FEATURES,
++	.flags			= PHY_HAS_INTERRUPT,
++	.config_aneg		= genphy_config_aneg,
++	.read_status		= genphy_read_status,
++	.ack_interrupt		= at803x_ack_interrupt,
++	.config_intr		= at803x_config_intr,
+ } };
+ 
+ module_phy_driver(at803x_driver);
+@@ -455,6 +475,7 @@ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
+ 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++	{ ATH8032_PHY_ID, AT803X_PHY_ID_MASK },
+ 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+ 	{ }
+ };
diff --git a/target/linux/generic/pending-4.14/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch b/target/linux/generic/pending-4.14/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
new file mode 100644
index 0000000000..d8aea32b5a
--- /dev/null
+++ b/target/linux/generic/pending-4.14/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
@@ -0,0 +1,43 @@
+From patchwork Fri Jul 21 18:36:24 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [2/5] e1000e: Fix wrong comment related to link detection
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857489
+Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:24 -0700
+
+Reading e1000e_check_for_copper_link() shows that get_link_status is set to
+false after link has been detected. Therefore, it stays TRUE until then.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -5096,7 +5096,7 @@ static bool e1000e_has_link(struct e1000
+ 
+ 	/* get_link_status is set on LSC (link status) interrupt or
+ 	 * Rx sequence error interrupt.  get_link_status will stay
+-	 * false until the check_for_link establishes link
++	 * true until the check_for_link establishes link
+ 	 * for copper adapters ONLY
+ 	 */
+ 	switch (hw->phy.media_type) {
+@@ -5114,7 +5114,7 @@ static bool e1000e_has_link(struct e1000
+ 		break;
+ 	case e1000_media_type_internal_serdes:
+ 		ret_val = hw->mac.ops.check_for_link(hw);
+-		link_active = adapter->hw.mac.serdes_has_link;
++		link_active = hw->mac.serdes_has_link;
+ 		break;
+ 	default:
+ 	case e1000_media_type_unknown:
diff --git a/target/linux/generic/pending-4.14/201-extra_optimization.patch b/target/linux/generic/pending-4.14/201-extra_optimization.patch
new file mode 100644
index 0000000000..71883755cf
--- /dev/null
+++ b/target/linux/generic/pending-4.14/201-extra_optimization.patch
@@ -0,0 +1,32 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: Upgrade to Linux 2.6.19
+
+- Includes large parts of the patch from #1021 by dpalffy
+- Includes RB532 NAND driver changes by n0-1
+
+[john@phrozen.org: feix will add this to his upstream queue]
+
+lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -637,12 +637,12 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
+ 
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= $(call cc-option,-Oz,-Os)
+-KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
++KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
+ else
+ ifdef CONFIG_PROFILE_ALL_BRANCHES
+-KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
++KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
+ else
+-KBUILD_CFLAGS   += -O2
++KBUILD_CFLAGS   += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
+ endif
+ endif
+ 
diff --git a/target/linux/generic/pending-4.14/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-4.14/203-kallsyms_uncompressed.patch
new file mode 100644
index 0000000000..fa68f307d4
--- /dev/null
+++ b/target/linux/generic/pending-4.14/203-kallsyms_uncompressed.patch
@@ -0,0 +1,119 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
+
+[john@phrozen.org: added to my upstream queue 30.12.2016]
+lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ init/Kconfig            | 11 +++++++++++
+ kernel/kallsyms.c       |  8 ++++++++
+ scripts/kallsyms.c      | 12 ++++++++++++
+ scripts/link-vmlinux.sh |  4 ++++
+ 4 files changed, 35 insertions(+)
+
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1081,6 +1081,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
+ 	  the unaligned access emulation.
+ 	  see arch/parisc/kernel/unaligned.c for reference
+ 
++config KALLSYMS_UNCOMPRESSED
++	bool "Keep kallsyms uncompressed"
++	depends on KALLSYMS
++	help
++		Normally kallsyms contains compressed symbols (using a token table),
++		reducing the uncompressed kernel image size. Keeping the symbol table
++		uncompressed significantly improves the size of this part in compressed
++		kernel images.
++
++		Say N unless you need compressed kernel images to be small.
++
+ config HAVE_PCSPKR_PLATFORM
+ 	bool
+ 
+--- a/kernel/kallsyms.c
++++ b/kernel/kallsyms.c
+@@ -108,6 +108,11 @@ static unsigned int kallsyms_expand_symb
+ 	 * For every byte on the compressed symbol data, copy the table
+ 	 * entry for that byte.
+ 	 */
++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
++	memcpy(result, data + 1, len - 1);
++	result += len - 1;
++	len = 0;
++#endif
+ 	while (len) {
+ 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
+ 		data++;
+@@ -140,6 +145,9 @@ tail:
+  */
+ static char kallsyms_get_symbol_type(unsigned int off)
+ {
++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
++	return kallsyms_names[off + 1];
++#endif
+ 	/*
+ 	 * Get just the first code, look it up in the token table,
+ 	 * and return the first char from this token.
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -61,6 +61,7 @@ static struct addr_range percpu_range =
+ static struct sym_entry *table;
+ static unsigned int table_size, table_cnt;
+ static int all_symbols = 0;
++static int uncompressed = 0;
+ static int absolute_percpu = 0;
+ static char symbol_prefix_char = '\0';
+ static int base_relative = 0;
+@@ -457,6 +458,9 @@ static void write_src(void)
+ 
+ 	free(markers);
+ 
++	if (uncompressed)
++		return;
++
+ 	output_label("kallsyms_token_table");
+ 	off = 0;
+ 	for (i = 0; i < 256; i++) {
+@@ -515,6 +519,9 @@ static void *find_token(unsigned char *s
+ {
+ 	int i;
+ 
++	if (uncompressed)
++		return NULL;
++
+ 	for (i = 0; i < len - 1; i++) {
+ 		if (str[i] == token[0] && str[i+1] == token[1])
+ 			return &str[i];
+@@ -587,6 +594,9 @@ static void optimize_result(void)
+ {
+ 	int i, best;
+ 
++	if (uncompressed)
++		return;
++
+ 	/* using the '\0' symbol last allows compress_symbols to use standard
+ 	 * fast string functions */
+ 	for (i = 255; i >= 0; i--) {
+@@ -775,6 +785,8 @@ int main(int argc, char **argv)
+ 				symbol_prefix_char = *p;
+ 			} else if (strcmp(argv[i], "--base-relative") == 0)
+ 				base_relative = 1;
++			else if (strcmp(argv[i], "--uncompressed") == 0)
++				uncompressed = 1;
+ 			else
+ 				usage();
+ 		}
+--- a/scripts/link-vmlinux.sh
++++ b/scripts/link-vmlinux.sh
+@@ -164,6 +164,10 @@ kallsyms()
+ 		kallsymopt="${kallsymopt} --base-relative"
+ 	fi
+ 
++	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
++		kallsymopt="${kallsymopt} --uncompressed"
++	fi
++
+ 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
+ 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
+ 
diff --git a/target/linux/generic/pending-4.14/205-backtrace_module_info.patch b/target/linux/generic/pending-4.14/205-backtrace_module_info.patch
new file mode 100644
index 0000000000..4040f91021
--- /dev/null
+++ b/target/linux/generic/pending-4.14/205-backtrace_module_info.patch
@@ -0,0 +1,45 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
+
+[john@phrozen.org: felix will add this to his upstream queue]
+
+lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ lib/vsprintf.c | 15 +++++++++++----
+ 1 file changed, 11 insertions(+), 4 deletions(-)
+
+--- a/lib/vsprintf.c
++++ b/lib/vsprintf.c
+@@ -670,8 +670,10 @@ char *symbol_string(char *buf, char *end
+ 		    struct printf_spec spec, const char *fmt)
+ {
+ 	unsigned long value;
+-#ifdef CONFIG_KALLSYMS
+ 	char sym[KSYM_SYMBOL_LEN];
++#ifndef CONFIG_KALLSYMS
++	struct module *mod;
++	int len;
+ #endif
+ 
+ 	if (fmt[1] == 'R')
+@@ -685,11 +687,16 @@ char *symbol_string(char *buf, char *end
+ 		sprint_symbol(sym, value);
+ 	else
+ 		sprint_symbol_no_offset(sym, value);
+-
+-	return string(buf, end, sym, spec);
+ #else
+-	return special_hex_number(buf, end, value, sizeof(void *));
++	len = snprintf(sym, sizeof(sym), "0x%lx", value);
++
++	mod = __module_address(value);
++	if (mod)
++		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
++			 mod->name, mod->core_layout.base,
++			 mod->core_layout.size);
+ #endif
++	return string(buf, end, sym, spec);
+ }
+ 
+ static noinline_for_stack
diff --git a/target/linux/generic/pending-4.14/206-mips-disable-vdso.patch b/target/linux/generic/pending-4.14/206-mips-disable-vdso.patch
new file mode 100644
index 0000000000..f3c58dcd3a
--- /dev/null
+++ b/target/linux/generic/pending-4.14/206-mips-disable-vdso.patch
@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: disable MIPS VDSO by default until the cache issues have been resolved
+
+lede-commit: 1185e645a773c86aa88cf04d0e2911dc62eb43f5
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/vdso/Makefile | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/vdso/Makefile
++++ b/arch/mips/vdso/Makefile
+@@ -30,9 +30,9 @@ aflags-vdso := $(ccflags-vdso) \
+ ifndef CONFIG_CPU_MIPSR6
+   ifeq ($(call ld-ifversion, -lt, 225000000, y),y)
+     $(warning MIPS VDSO requires binutils >= 2.25)
+-    obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
+-    ccflags-vdso += -DDISABLE_MIPS_VDSO
+   endif
++  obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
++  ccflags-vdso += -DDISABLE_MIPS_VDSO
+ endif
+ 
+ # VDSO linker flags.
diff --git a/target/linux/generic/pending-4.14/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-4.14/240-remove-unsane-filenames-from-deps_initramfs-list.patch
new file mode 100644
index 0000000000..f440305c9b
--- /dev/null
+++ b/target/linux/generic/pending-4.14/240-remove-unsane-filenames-from-deps_initramfs-list.patch
@@ -0,0 +1,46 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: usr: sanitize deps_initramfs list
+
+If any filename in the intramfs dependency
+list contains a colon, that causes a kernel
+build error like this:
+
+/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
+make[5]: *** [usr] Error 2
+
+Fix it by removing such filenames from the
+deps_initramfs list.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ usr/Makefile | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/usr/Makefile
++++ b/usr/Makefile
+@@ -39,20 +39,22 @@ ifneq ($(wildcard $(obj)/$(datafile_d_y)
+ 	include $(obj)/$(datafile_d_y)
+ endif
+ 
++deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
++
+ quiet_cmd_initfs = GEN     $@
+       cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
+ 
+ targets := $(datafile_y)
+ 
+ # do not try to update files included in initramfs
+-$(deps_initramfs): ;
++$(deps_initramfs_sane): ;
+ 
+-$(deps_initramfs): klibcdirs
++$(deps_initramfs_sane): klibcdirs
+ # We rebuild initramfs_data.cpio if:
+ # 1) Any included file is newer then initramfs_data.cpio
+ # 2) There are changes in which files are included (added or deleted)
+ # 3) If gen_init_cpio are newer than initramfs_data.cpio
+ # 4) arguments to gen_initramfs.sh changes
+-$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
++$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
+ 	$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/$(datafile_d_y)
+ 	$(call if_changed,initfs)
diff --git a/target/linux/generic/pending-4.14/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-4.14/261-enable_wilink_platform_without_drivers.patch
new file mode 100644
index 0000000000..9955ab3c0b
--- /dev/null
+++ b/target/linux/generic/pending-4.14/261-enable_wilink_platform_without_drivers.patch
@@ -0,0 +1,20 @@
+From: Imre Kaloz <kaloz@openwrt.org>
+Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
+ compat-wireless, too
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ti/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ti/Kconfig
++++ b/drivers/net/wireless/ti/Kconfig
+@@ -19,7 +19,7 @@ source "drivers/net/wireless/ti/wlcore/K
+ 
+ config WILINK_PLATFORM_DATA
+ 	bool "TI WiLink platform data"
+-	depends on WLCORE_SDIO || WL1251_SDIO
++	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
+ 	default y
+ 	---help---
+ 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-4.14/270-uapi-kernel.h-glibc-specific-inclusion-of-sysinfo.h.patch b/target/linux/generic/pending-4.14/270-uapi-kernel.h-glibc-specific-inclusion-of-sysinfo.h.patch
new file mode 100644
index 0000000000..9ec8daf886
--- /dev/null
+++ b/target/linux/generic/pending-4.14/270-uapi-kernel.h-glibc-specific-inclusion-of-sysinfo.h.patch
@@ -0,0 +1,32 @@
+From: David Heidelberger <david.heidelberger@ixit.cz>
+Subject: uapi/kernel.h: glibc specific inclusion of sysinfo.h
+
+including sysinfo.h from kernel.h makes no sense whatsoever,
+but removing it breaks glibc's userspace header,
+which includes kernel.h instead of sysinfo.h from their sys/sysinfo.h.
+this seems to be a historical mistake.
+on musl, including any header that uses kernel.h directly or indirectly
+plus sys/sysinfo.h will produce a compile error due to redefinition of
+struct sysinfo from sys/sysinfo.h.
+so for now, only include it on glibc or when including from kernel
+in order not to break their headers.
+
+Signed-off-by: John Spencer <maillist-linux@barfooze.de>
+Signed-off-by: David Heidelberger <david.heidelberger@ixit.cz>
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/uapi/linux/kernel.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/uapi/linux/kernel.h
++++ b/include/uapi/linux/kernel.h
+@@ -2,7 +2,9 @@
+ #ifndef _UAPI_LINUX_KERNEL_H
+ #define _UAPI_LINUX_KERNEL_H
+ 
++#if defined(__KERNEL__) || defined( __GLIBC__)
+ #include <linux/sysinfo.h>
++#endif
+ 
+ /*
+  * 'kernel.h' contains some often-used function prototypes etc
diff --git a/target/linux/generic/pending-4.14/271-uapi-libc-compat.h-do-not-rely-on-__GLIBC__.patch b/target/linux/generic/pending-4.14/271-uapi-libc-compat.h-do-not-rely-on-__GLIBC__.patch
new file mode 100644
index 0000000000..9ae148da4f
--- /dev/null
+++ b/target/linux/generic/pending-4.14/271-uapi-libc-compat.h-do-not-rely-on-__GLIBC__.patch
@@ -0,0 +1,105 @@
+From: David Heidelberger <david.heidelberger@ixit.cz>
+Subject: uapi/libc-compat.h: do not rely on __GLIBC__
+
+Musl provides the same structs as glibc, but does not provide a define to
+allow its detection. Since the absence of __GLIBC__ also can mean that it
+is included from the kernel, change the __GLIBC__ detection to
+!__KERNEL__, which should always be true when included from userspace.
+
+Signed-off-by: John Spencer <maillist-linux@barfooze.de>
+Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/uapi/linux/libc-compat.h | 18 +++++++++---------
+ 1 file changed, 9 insertions(+), 9 deletions(-)
+
+--- a/include/uapi/linux/libc-compat.h
++++ b/include/uapi/linux/libc-compat.h
+@@ -49,13 +49,13 @@
+ #ifndef _UAPI_LIBC_COMPAT_H
+ #define _UAPI_LIBC_COMPAT_H
+ 
+-/* We have included glibc headers... */
+-#if defined(__GLIBC__)
++/* We have included libc headers... */
++#if !defined(__KERNEL__)
+ 
+-/* Coordinate with glibc net/if.h header. */
+-#if defined(_NET_IF_H) && defined(__USE_MISC)
++/* Coordinate with libc net/if.h header. */
++#if defined(_NET_IF_H) && (!defined(__GLIBC__) || defined(__USE_MISC))
+ 
+-/* GLIBC headers included first so don't define anything
++/* LIBC headers included first so don't define anything
+  * that would already be defined. */
+ 
+ #define __UAPI_DEF_IF_IFCONF 0
+@@ -66,7 +66,11 @@
+ #define __UAPI_DEF_IF_NET_DEVICE_FLAGS 0
+ /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
+ #ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
++#ifdef __GLIBC__
+ #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1
++#else
++#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 0
++#endif
+ #endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
+ 
+ #else /* _NET_IF_H */
+@@ -86,10 +90,10 @@
+ 
+ #endif /* _NET_IF_H */
+ 
+-/* Coordinate with glibc netinet/in.h header. */
++/* Coordinate with libc netinet/in.h header. */
+ #if defined(_NETINET_IN_H)
+ 
+-/* GLIBC headers included first so don't define anything
++/* LIBC headers included first so don't define anything
+  * that would already be defined. */
+ #define __UAPI_DEF_IN_ADDR		0
+ #define __UAPI_DEF_IN_IPPROTO		0
+@@ -103,7 +107,7 @@
+  * if the glibc code didn't define them. This guard matches
+  * the guard in glibc/inet/netinet/in.h which defines the
+  * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */
+-#if defined(__USE_MISC) || defined (__USE_GNU)
++#if !defined(__GLIBC__) || defined(__USE_MISC) || defined (__USE_GNU)
+ #define __UAPI_DEF_IN6_ADDR_ALT		0
+ #else
+ #define __UAPI_DEF_IN6_ADDR_ALT		1
+@@ -118,7 +122,7 @@
+ #else
+ 
+ /* Linux headers included first, and we must define everything
+- * we need. The expectation is that glibc will check the
++ * we need. The expectation is that the libc will check the
+  * __UAPI_DEF_* defines and adjust appropriately. */
+ #define __UAPI_DEF_IN_ADDR		1
+ #define __UAPI_DEF_IN_IPPROTO		1
+@@ -128,7 +132,7 @@
+ #define __UAPI_DEF_IN_CLASS		1
+ 
+ #define __UAPI_DEF_IN6_ADDR		1
+-/* We unconditionally define the in6_addr macros and glibc must
++/* We unconditionally define the in6_addr macros and the libc must
+  * coordinate. */
+ #define __UAPI_DEF_IN6_ADDR_ALT		1
+ #define __UAPI_DEF_SOCKADDR_IN6		1
+@@ -169,7 +173,7 @@
+ /* If we did not see any headers from any supported C libraries,
+  * or we are being included in the kernel, then define everything
+  * that we need. */
+-#else /* !defined(__GLIBC__) */
++#else /* defined(__KERNEL__) */
+ 
+ /* Definitions for if.h */
+ #define __UAPI_DEF_IF_IFCONF 1
+@@ -209,6 +213,6 @@
+ /* Definitions for xattr.h */
+ #define __UAPI_DEF_XATTR		1
+ 
+-#endif /* __GLIBC__ */
++#endif /* __KERNEL__ */
+ 
+ #endif /* _UAPI_LIBC_COMPAT_H */
diff --git a/target/linux/generic/pending-4.14/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch b/target/linux/generic/pending-4.14/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch
new file mode 100644
index 0000000000..1dca07328d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch
@@ -0,0 +1,65 @@
+From: David Heidelberger <david.heidelberger@ixit.cz>
+Subject: uapi/if_ether.h: prevent redefinition of struct ethhdr
+
+Musl provides its own ethhdr struct definition. Add a guard to prevent
+its definition of the appropriate musl header has already been included.
+
+Signed-off-by: John Spencer <maillist-linux@barfooze.de>
+Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/uapi/linux/if_ether.h    |  3 +++
+ include/uapi/linux/libc-compat.h | 11 +++++++++++
+ 2 files changed, 14 insertions(+)
+
+--- a/include/uapi/linux/if_ether.h
++++ b/include/uapi/linux/if_ether.h
+@@ -23,6 +23,7 @@
+ #define _UAPI_LINUX_IF_ETHER_H
+ 
+ #include <linux/types.h>
++#include <linux/libc-compat.h>
+ 
+ /*
+  *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+@@ -149,11 +150,13 @@
+  *	This is an Ethernet frame header.
+  */
+ 
++#if __UAPI_DEF_ETHHDR
+ struct ethhdr {
+ 	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+ 	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+ 	__be16		h_proto;		/* packet type ID field	*/
+ } __attribute__((packed));
++#endif
+ 
+ 
+ #endif /* _UAPI_LINUX_IF_ETHER_H */
+--- a/include/uapi/linux/libc-compat.h
++++ b/include/uapi/linux/libc-compat.h
+@@ -90,6 +90,14 @@
+ 
+ #endif /* _NET_IF_H */
+ 
++/* musl defines the ethhdr struct itself in its netinet/if_ether.h.
++ * Glibc just includes the kernel header and uses a different guard. */
++#if defined(_NETINET_IF_ETHER_H)
++#define __UAPI_DEF_ETHHDR		0
++#else
++#define __UAPI_DEF_ETHHDR		1
++#endif
++
+ /* Coordinate with libc netinet/in.h header. */
+ #if defined(_NETINET_IN_H)
+ 
+@@ -185,6 +193,9 @@
+ /* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
+ #define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1
+ 
++/* Definitions for if_ether.h */
++#define __UAPI_DEF_ETHHDR 		1
++
+ /* Definitions for in.h */
+ #define __UAPI_DEF_IN_ADDR		1
+ #define __UAPI_DEF_IN_IPPROTO		1
diff --git a/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch
new file mode 100644
index 0000000000..9419e9916b
--- /dev/null
+++ b/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch
@@ -0,0 +1,40 @@
+From: Mark Miller <mark@mirell.org>
+Subject: mips: expose CONFIG_BOOT_RAW
+
+This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
+certain Broadcom chipsets running CFE in order to load the kernel.
+
+Signed-off-by: Mark Miller <mark@mirell.org>
+Acked-by: Rob Landley <rob@landley.net>
+---
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1066,9 +1066,6 @@ config FW_ARC
+ config ARCH_MAY_HAVE_PC_FDC
+ 	bool
+ 
+-config BOOT_RAW
+-	bool
+-
+ config CEVT_BCM1480
+ 	bool
+ 
+@@ -2966,6 +2963,18 @@ choice
+ 		bool "Extend builtin kernel arguments with bootloader arguments"
+ endchoice
+ 
++config BOOT_RAW
++	bool "Enable the kernel to be executed from the load address"
++	default n
++	help
++	 Allow the kernel to be executed from the load address for
++	 bootloaders which cannot read the ELF format. This places
++	 a jump to start_kernel at the load address.
++
++	 If unsure, say N.
++
++
++
+ endmenu
+ 
+ config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-4.14/302-mips_no_branch_likely.patch b/target/linux/generic/pending-4.14/302-mips_no_branch_likely.patch
new file mode 100644
index 0000000000..0e4600237d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/302-mips_no_branch_likely.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mips: use -mno-branch-likely for kernel and userspace
+
+saves ~11k kernel size after lzma and ~12k squashfs size in the
+
+lede-commit: 41a039f46450ffae9483d6216422098669da2900
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -90,7 +90,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ # machines may also.  Since BFD is incredibly buggy with respect to
+ # crossformat linking we rely on the elf2ecoff tool for format conversion.
+ #
+-cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
++cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+ KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch b/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch
new file mode 100644
index 0000000000..bee62b2664
--- /dev/null
+++ b/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch
@@ -0,0 +1,137 @@
+From:   Manuel Lauss <manuel.lauss@gmail.com>
+Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
+
+This small patch makes the MIPS FPU emulator optional. The kernel
+kills float-users on systems without a hardware FPU by sending a SIGILL.
+
+Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
+optimizing for size).
+
+Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
+---
+v4: rediffed because of patch 1/2, should now work with micromips as well
+v3: updated patch description with size savings.
+v2: incorporated changes suggested by Jonas Gorski
+    force the fpu emulator on for micromips: relocating the parts
+    of the mmips code in the emulator to other areas would be a
+    much larger change; I went the cheap route instead with this.
+
+ arch/mips/Kbuild                     |  2 +-
+ arch/mips/Kconfig                    | 14 ++++++++++++++
+ arch/mips/include/asm/fpu.h          |  5 +++--
+ arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
+ 4 files changed, 33 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2890,6 +2890,20 @@ config MIPS_O32_FP64_SUPPORT
+ 
+ 	  If unsure, say N.
+ 
++config MIPS_FPU_EMULATOR
++	bool "MIPS FPU Emulator"
++	default y
++	help
++	  This option lets you disable the built-in MIPS FPU (Coprocessor 1)
++	  emulator, which handles floating-point instructions on processors
++	  without a hardware FPU.  It is generally a good idea to keep the
++	  emulator built-in, unless you are perfectly sure you have a
++	  complete soft-float environment.  With the emulator disabled, all
++	  users of float operations will be killed with an illegal instr-
++	  uction exception.
++
++	  Say Y, please.
++
+ config USE_OF
+ 	bool
+ 	select OF
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -319,7 +319,7 @@ OBJCOPYFLAGS		+= --remove-section=.regin
+ head-y := arch/mips/kernel/head.o
+ 
+ libs-y			+= arch/mips/lib/
+-libs-y			+= arch/mips/math-emu/
++libs-$(CONFIG_MIPS_FPU_EMULATOR)	+= arch/mips/math-emu/
+ 
+ # See arch/mips/Kbuild for content of core part of the kernel
+ core-y += arch/mips/
+--- a/arch/mips/include/asm/fpu.h
++++ b/arch/mips/include/asm/fpu.h
+@@ -230,8 +230,10 @@ static inline int init_fpu(void)
+ 		/* Restore FRE */
+ 		write_c0_config5(config5);
+ 		enable_fpu_hazard();
+-	} else
++	} else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
+ 		fpu_emulator_init_fpu();
++	else
++		ret = SIGILL;
+ 
+ 	return ret;
+ }
+--- a/arch/mips/include/asm/fpu_emulator.h
++++ b/arch/mips/include/asm/fpu_emulator.h
+@@ -30,6 +30,7 @@
+ #include <asm/local.h>
+ #include <asm/processor.h>
+ 
++#ifdef CONFIG_MIPS_FPU_EMULATOR
+ #ifdef CONFIG_DEBUG_FS
+ 
+ struct mips_fpu_emulator_stats {
+@@ -179,6 +180,16 @@ do {									\
+ extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
+ 				    struct mips_fpu_struct *ctx, int has_fpu,
+ 				    void __user **fault_addr);
++#else	/* no CONFIG_MIPS_FPU_EMULATOR */
++static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
++				struct mips_fpu_struct *ctx, int has_fpu,
++				void __user **fault_addr)
++{
++	*fault_addr = NULL;
++	return SIGILL;	/* we don't speak MIPS FPU */
++}
++#endif	/* CONFIG_MIPS_FPU_EMULATOR */
++
+ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ 		     struct task_struct *tsk);
+ int process_fpemu_return(int sig, void __user *fault_addr,
+--- a/arch/mips/include/asm/dsemul.h
++++ b/arch/mips/include/asm/dsemul.h
+@@ -41,6 +41,7 @@ struct task_struct;
+ extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
+ 		       unsigned long branch_pc, unsigned long cont_pc);
+ 
++#ifdef CONFIG_MIPS_FPU_EMULATOR
+ /**
+  * do_dsemulret() - Return from a delay slot 'emulation' frame
+  * @xcp:	User thread register context.
+@@ -88,5 +89,27 @@ extern bool dsemul_thread_rollback(struc
+  * before @mm is freed in order to avoid memory leaks.
+  */
+ extern void dsemul_mm_cleanup(struct mm_struct *mm);
++#else
++static inline bool do_dsemulret(struct pt_regs *xcp)
++{
++	return false;
++}
++
++static inline bool dsemul_thread_cleanup(struct task_struct *tsk)
++{
++	return false;
++}
++
++static inline bool dsemul_thread_rollback(struct pt_regs *regs)
++{
++	return false;
++}
++
++static inline void dsemul_mm_cleanup(struct mm_struct *mm)
++{
++
++}
++
++#endif
+ 
+ #endif /* __MIPS_ASM_DSEMUL_H__ */
diff --git a/target/linux/generic/pending-4.14/305-mips_module_reloc.patch b/target/linux/generic/pending-4.14/305-mips_module_reloc.patch
new file mode 100644
index 0000000000..253b50f62c
--- /dev/null
+++ b/target/linux/generic/pending-4.14/305-mips_module_reloc.patch
@@ -0,0 +1,366 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
+
+lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile             |   5 +
+ arch/mips/include/asm/module.h |   5 +
+ arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
+ 3 files changed, 284 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -93,8 +93,13 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
++ifdef CONFIG_64BIT
+ KBUILD_AFLAGS_MODULE		+= -mlong-calls
+ KBUILD_CFLAGS_MODULE		+= -mlong-calls
++else
++KBUILD_AFLAGS_MODULE		+= -mno-long-calls
++KBUILD_CFLAGS_MODULE		+= -mno-long-calls
++endif
+ 
+ ifeq ($(CONFIG_RELOCATABLE),y)
+ LDFLAGS_vmlinux			+= --emit-relocs
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -12,6 +12,11 @@ struct mod_arch_specific {
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
+ 	struct mips_hi16 *r_mips_hi16_list;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -44,14 +44,221 @@ struct mips_hi16 {
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
+-#ifdef MODULE_START
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	/* mark all pages except for the last one */
++	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
++		set_bit(PG_owner_priv_1, &p->flags);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr)
++{
++	struct page *page;
++	bool free;
++
++	page = virt_to_page(ptr);
++	do {
++		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
++		__free_page(page);
++		page++;
++	} while (free);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
++#ifdef MODULE_START
+ 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
+ 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
+ 				__builtin_return_address(0));
++#else
++	void *ptr;
++
++	if (size == 0)
++		return NULL;
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
+ }
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
++}
++
++/* Free memory returned from module_alloc */
++void module_memfree(void *module_region)
++{
++	if (is_phys_addr(module_region))
++		free_phys(module_region);
++	else
++		vfree(module_region);
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++
++int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
++			      char *secstrings, struct module *mod)
++{
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if (IS_ENABLED(CONFIG_64BIT))
++		return 0;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
++	return 0;
++}
+ 
+ static int apply_r_mips_none(struct module *me, u32 *location,
+ 			     u32 base, Elf_Addr v, bool rela)
+@@ -67,9 +274,40 @@ static int apply_r_mips_32(struct module
+ 	return 0;
+ }
+ 
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
++{
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
++
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
++
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
++
++	return (Elf_Addr) tramp;
++}
++
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
+ static int apply_r_mips_26(struct module *me, u32 *location,
+ 			   u32 base, Elf_Addr v, bool rela)
+ {
++	u32 ofs = base & 0x03ffffff;
++
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
+ 		       me->name);
+@@ -77,13 +315,17 @@ static int apply_r_mips_26(struct module
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		pr_err("module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
++		v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			pr_err("module %s: relocation overflow\n",
++			       me->name);
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+ 	*location = (*location & ~0x03ffffff) |
+-		    ((base + (v >> 2)) & 0x03ffffff);
++		    ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+@@ -459,9 +701,36 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
++void module_arch_freeing_init(struct module *mod)
++{
++	if (mod->state == MODULE_STATE_LIVE)
++		return;
++
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++}
++
+ void module_arch_cleanup(struct module *mod)
+ {
+ 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-4.14/306-mips_mem_functions_performance.patch b/target/linux/generic/pending-4.14/306-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..e73cfd61b3
--- /dev/null
+++ b/target/linux/generic/pending-4.14/306-mips_mem_functions_performance.patch
@@ -0,0 +1,106 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy  for better performance and (in some instances) smaller code
+
+lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/boot/compressed/Makefile |  3 ++-
+ arch/mips/include/asm/string.h     | 38 ++++++++++++++++++++++++++++++++++++++
+ arch/mips/lib/Makefile             |  2 +-
+ arch/mips/lib/memcmp.c             | 22 ++++++++++++++++++++++
+ 4 files changed, 63 insertions(+), 2 deletions(-)
+ create mode 100644 arch/mips/lib/memcmp.c
+
+--- a/arch/mips/boot/compressed/Makefile
++++ b/arch/mips/boot/compressed/Makefile
+@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(filter-out -pg, $(KBU
+ KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+ 
+ KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
+-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
++	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
++	-D__ZBOOT__
+ 
+ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+ 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+ 
++#ifndef __ZBOOT__
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
++
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
++#endif
++
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -5,7 +5,7 @@
+ 
+ lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ 	   mips-atomic.o strncpy_user.o \
+-	   strnlen_user.o uncached.o
++	   strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o iomap_copy.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/pending-4.14/307-mips_highmem_offset.patch b/target/linux/generic/pending-4.14/307-mips_highmem_offset.patch
new file mode 100644
index 0000000000..0529b0c5c8
--- /dev/null
+++ b/target/linux/generic/pending-4.14/307-mips_highmem_offset.patch
@@ -0,0 +1,19 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/include/asm/mach-generic/spaces.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-generic/spaces.h
++++ b/arch/mips/include/asm/mach-generic/spaces.h
+@@ -46,7 +46,7 @@
+  * Memory above this physical address will be considered highmem.
+  */
+ #ifndef HIGHMEM_START
+-#define HIGHMEM_START		_AC(0x20000000, UL)
++#define HIGHMEM_START		_AC(0x10000000, UL)
+ #endif
+ 
+ #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-4.14/308-mips32r2_tune.patch b/target/linux/generic/pending-4.14/308-mips32r2_tune.patch
new file mode 100644
index 0000000000..7f98616d7a
--- /dev/null
+++ b/target/linux/generic/pending-4.14/308-mips32r2_tune.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
+
+This provides a good tradeoff across at least 24Kc-74Kc, while also
+producing smaller code.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -162,7 +162,7 @@ cflags-$(CONFIG_CPU_R4X00)	+= -march=r46
+ cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+ cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ 			-Wa,-mips32 -Wa,--trap
+-cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
++cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2 -mtune=34kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ 			-Wa,-mips32r2 -Wa,--trap
+ cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
+ cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
diff --git a/target/linux/generic/pending-4.14/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-4.14/310-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..bc9f0a4c4d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/310-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: fix errors in unresolved weak symbols on arm
+
+lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/arm/kernel/module.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -95,6 +95,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-4.14/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-4.14/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
new file mode 100644
index 0000000000..5cdcc2b242
--- /dev/null
+++ b/target/linux/generic/pending-4.14/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
@@ -0,0 +1,272 @@
+From: Yousong Zhou <yszhou4tech@gmail.com>
+Subject: MIPS: kexec: Accept command line parameters from userspace.
+
+Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
+---
+ arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
+ arch/mips/kernel/machine_kexec.h   |   20 +++++
+ arch/mips/kernel/relocate_kernel.S |   21 +++--
+ 3 files changed, 167 insertions(+), 27 deletions(-)
+ create mode 100644 arch/mips/kernel/machine_kexec.h
+
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -10,14 +10,11 @@
+ #include <linux/mm.h>
+ #include <linux/delay.h>
+ 
++#include <asm/bootinfo.h>
+ #include <asm/cacheflush.h>
+ #include <asm/page.h>
+-
+-extern const unsigned char relocate_new_kernel[];
+-extern const size_t relocate_new_kernel_size;
+-
+-extern unsigned long kexec_start_address;
+-extern unsigned long kexec_indirection_page;
++#include <asm/uaccess.h>
++#include "machine_kexec.h"
+ 
+ int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+ void (*_machine_kexec_shutdown)(void) = NULL;
+@@ -28,6 +25,99 @@ atomic_t kexec_ready_to_reboot = ATOMIC_
+ void (*_crash_smp_send_stop)(void) = NULL;
+ #endif
+ 
++static void machine_kexec_print_args(void)
++{
++	unsigned long argc = (int)kexec_args[0];
++	int i;
++
++	pr_info("kexec_args[0] (argc): %lu\n", argc);
++	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
++	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
++	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
++
++	for (i = 0; i < argc; i++) {
++		pr_info("kexec_argv[%d] = %p, %s\n",
++				i, kexec_argv[i], kexec_argv[i]);
++	}
++}
++
++static void machine_kexec_init_argv(struct kimage *image)
++{
++	void __user *buf = NULL;
++	size_t bufsz;
++	size_t size;
++	int i;
++
++	bufsz = 0;
++	for (i = 0; i < image->nr_segments; i++) {
++		struct kexec_segment *seg;
++
++		seg = &image->segment[i];
++		if (seg->bufsz < 6)
++			continue;
++
++		if (strncmp((char *) seg->buf, "kexec ", 6))
++			continue;
++
++		buf = seg->buf;
++		bufsz = seg->bufsz;
++		break;
++	}
++
++	if (!buf)
++		return;
++
++	size = KEXEC_COMMAND_LINE_SIZE;
++	size = min(size, bufsz);
++	if (size < bufsz)
++		pr_warn("kexec command line truncated to %zd bytes\n", size);
++
++	/* Copy to kernel space */
++	copy_from_user(kexec_argv_buf, buf, size);
++	kexec_argv_buf[size - 1] = 0;
++}
++
++static void machine_kexec_parse_argv(struct kimage *image)
++{
++	char *reboot_code_buffer;
++	int reloc_delta;
++	char *ptr;
++	int argc;
++	int i;
++
++	ptr = kexec_argv_buf;
++	argc = 0;
++
++	/*
++	 * convert command line string to array of parameters
++	 * (as bootloader does).
++	 */
++	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
++		if (*ptr == ' ') {
++			*ptr++ = '\0';
++			continue;
++		}
++
++		kexec_argv[argc++] = ptr;
++		ptr = strchr(ptr, ' ');
++	}
++
++	if (!argc)
++		return;
++
++	kexec_args[0] = argc;
++	kexec_args[1] = (unsigned long)kexec_argv;
++	kexec_args[2] = 0;
++	kexec_args[3] = 0;
++
++	reboot_code_buffer = page_address(image->control_code_page);
++	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
++
++	kexec_args[1] += reloc_delta;
++	for (i = 0; i < argc; i++)
++		kexec_argv[i] += reloc_delta;
++}
++
+ static void kexec_image_info(const struct kimage *kimage)
+ {
+ 	unsigned long i;
+@@ -52,6 +142,18 @@ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
+ 	kexec_image_info(kimage);
++	/*
++	 * Whenever arguments passed from kexec-tools, Init the arguments as
++	 * the original ones to try avoiding booting failure.
++	 */
++
++	kexec_args[0] = fw_arg0;
++	kexec_args[1] = fw_arg1;
++	kexec_args[2] = fw_arg2;
++	kexec_args[3] = fw_arg3;
++
++	machine_kexec_init_argv(kimage);
++	machine_kexec_parse_argv(kimage);
+ 
+ 	if (_machine_kexec_prepare)
+ 		return _machine_kexec_prepare(kimage);
+@@ -89,10 +191,12 @@ machine_kexec(struct kimage *image)
+ 	unsigned long *ptr;
+ 
+ 	reboot_code_buffer =
+-	  (unsigned long)page_address(image->control_code_page);
++		(unsigned long)page_address(image->control_code_page);
++	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
+ 
+ 	kexec_start_address =
+ 		(unsigned long) phys_to_virt(image->start);
++	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
+ 
+ 	if (image->type == KEXEC_TYPE_DEFAULT) {
+ 		kexec_indirection_page =
+@@ -100,9 +204,19 @@ machine_kexec(struct kimage *image)
+ 	} else {
+ 		kexec_indirection_page = (unsigned long)&image->head;
+ 	}
++	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
+ 
+-	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
+-	       relocate_new_kernel_size);
++	pr_info("Where is memcpy: %p\n", memcpy);
++	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
++		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
++	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
++		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
++	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
++	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
++
++	pr_info("Before _print_args().\n");
++	machine_kexec_print_args();
++	pr_info("Before eval loop.\n");
+ 
+ 	/*
+ 	 * The generic kexec code builds a page list with physical
+@@ -121,15 +235,16 @@ machine_kexec(struct kimage *image)
+ 	/*
+ 	 * we do not want to be bothered.
+ 	 */
++	pr_info("Before irq_disable.\n");
+ 	local_irq_disable();
+ 
+-	printk("Will call new kernel at %08lx\n", image->start);
+-	printk("Bye ...\n");
++	pr_info("Will call new kernel at %08lx\n", image->start);
++	pr_info("Bye ...\n");
+ 	__flush_cache_all();
+ #ifdef CONFIG_SMP
+ 	/* All secondary cpus now may jump to kexec_wait cycle */
+ 	relocated_kexec_smp_wait = reboot_code_buffer +
+-		(void *)(kexec_smp_wait - relocate_new_kernel);
++		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
+ 	smp_wmb();
+ 	atomic_set(&kexec_ready_to_reboot, 1);
+ #endif
+--- /dev/null
++++ b/arch/mips/kernel/machine_kexec.h
+@@ -0,0 +1,20 @@
++#ifndef _MACHINE_KEXEC_H
++#define _MACHINE_KEXEC_H
++
++#ifndef __ASSEMBLY__
++extern const unsigned char kexec_relocate_new_kernel[];
++extern unsigned long kexec_relocate_new_kernel_end;
++extern unsigned long kexec_start_address;
++extern unsigned long kexec_indirection_page;
++
++extern char kexec_argv_buf[];
++extern char *kexec_argv[];
++
++#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
++#endif /* !__ASSEMBLY__ */
++
++#define KEXEC_COMMAND_LINE_SIZE		256
++#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
++#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
++
++#endif
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -12,8 +12,9 @@
+ #include <asm/mipsregs.h>
+ #include <asm/stackframe.h>
+ #include <asm/addrspace.h>
++#include "machine_kexec.h"
+ 
+-LEAF(relocate_new_kernel)
++LEAF(kexec_relocate_new_kernel)
+ 	PTR_L a0,	arg0
+ 	PTR_L a1,	arg1
+ 	PTR_L a2,	arg2
+@@ -98,7 +99,7 @@ done:
+ #endif
+ 	/* jump to kexec_start_address */
+ 	j		s1
+-	END(relocate_new_kernel)
++	END(kexec_relocate_new_kernel)
+ 
+ #ifdef CONFIG_SMP
+ /*
+@@ -184,9 +185,15 @@ kexec_indirection_page:
+ 	PTR		0
+ 	.size		kexec_indirection_page, PTRSIZE
+ 
+-relocate_new_kernel_end:
++kexec_argv_buf:
++	EXPORT(kexec_argv_buf)
++	.skip		KEXEC_COMMAND_LINE_SIZE
++	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
++
++kexec_argv:
++	EXPORT(kexec_argv)
++	.skip		KEXEC_ARGV_SIZE
++	.size		kexec_argv, KEXEC_ARGV_SIZE
+ 
+-relocate_new_kernel_size:
+-	EXPORT(relocate_new_kernel_size)
+-	PTR		relocate_new_kernel_end - relocate_new_kernel
+-	.size		relocate_new_kernel_size, PTRSIZE
++kexec_relocate_new_kernel_end:
++	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-4.14/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-4.14/332-arc-add-OWRTDTB-section.patch
new file mode 100644
index 0000000000..58f14b6ca5
--- /dev/null
+++ b/target/linux/generic/pending-4.14/332-arc-add-OWRTDTB-section.patch
@@ -0,0 +1,80 @@
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Subject: openwrt: arc - add OWRTDTB section
+
+This change allows OpenWRT to patch resulting kernel binary with
+external .dtb.
+
+That allows us to re-use exactky the same vmlinux on different boards
+given its ARC core configurations match (at least cache line sizes etc).
+
+""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
+.dtb right after it, keeping the string in place.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ arch/arc/kernel/head.S        | 10 ++++++++++
+ arch/arc/kernel/setup.c       |  4 +++-
+ arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
+ 3 files changed, 26 insertions(+), 1 deletion(-)
+
+--- a/arch/arc/kernel/head.S
++++ b/arch/arc/kernel/head.S
+@@ -49,6 +49,16 @@
+ 1:
+ .endm
+ 
++; Here "patch-dtb" will embed external .dtb
++; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
++; and pastes .dtb right after it, hense the string precedes
++; __image_dtb symbol.
++	.section .owrt, "aw",@progbits
++	.ascii	"OWRTDTB:"
++ENTRY(__image_dtb)
++	.fill	0x4000
++END(__image_dtb)
++
+ 	.section .init.text, "ax",@progbits
+ 
+ ;----------------------------------------------------------------
+--- a/arch/arc/kernel/setup.c
++++ b/arch/arc/kernel/setup.c
+@@ -421,6 +421,8 @@ static inline int is_kernel(unsigned lon
+ 	return 0;
+ }
+ 
++extern struct boot_param_header __image_dtb;
++
+ void __init setup_arch(char **cmdline_p)
+ {
+ #ifdef CONFIG_ARC_UBOOT_SUPPORT
+@@ -434,7 +436,7 @@ void __init setup_arch(char **cmdline_p)
+ #endif
+ 	{
+ 		/* No, so try the embedded one */
+-		machine_desc = setup_machine_fdt(__dtb_start);
++		machine_desc = setup_machine_fdt(&__image_dtb);
+ 		if (!machine_desc)
+ 			panic("Embedded DT invalid\n");
+ 
+--- a/arch/arc/kernel/vmlinux.lds.S
++++ b/arch/arc/kernel/vmlinux.lds.S
+@@ -30,6 +30,19 @@ SECTIONS
+ 
+ 	. = CONFIG_LINUX_LINK_BASE;
+ 
++	/*
++	 * In OpenWRT we want to patch built binary embedding .dtb of choice.
++	 * This is implemented with "patch-dtb" utility which searches for
++	 * "OWRTDTB:" string in first 16k of image and if it is found
++	 * copies .dtb right after mentioned string.
++	 *
++	 * Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
++	 */
++	.owrt : {
++		*(.owrt)
++		. = ALIGN(PAGE_SIZE);
++	}
++
+ 	_int_vec_base_lds = .;
+ 	.vector : {
+ 		*(.vector)
diff --git a/target/linux/generic/pending-4.14/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-4.14/333-arc-enable-unaligned-access-in-kernel-mode.patch
new file mode 100644
index 0000000000..4e0265aef5
--- /dev/null
+++ b/target/linux/generic/pending-4.14/333-arc-enable-unaligned-access-in-kernel-mode.patch
@@ -0,0 +1,24 @@
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Subject: arc: enable unaligned access in kernel mode
+
+This enables misaligned access handling even in kernel mode.
+Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
+here and there and to cope with that without fixing stuff in the drivers
+we're just gracefully handling it on ARC.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ arch/arc/kernel/unaligned.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arc/kernel/unaligned.c
++++ b/arch/arc/kernel/unaligned.c
+@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre
+ 	char buf[TASK_COMM_LEN];
+ 
+ 	/* handle user mode only and only if enabled by sysadmin */
+-	if (!user_mode(regs) || !unaligned_enabled)
++	if (!unaligned_enabled)
+ 		return 1;
+ 
+ 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-4.14/340-MIPS-mm-remove-mips_dma_mapping_error.patch b/target/linux/generic/pending-4.14/340-MIPS-mm-remove-mips_dma_mapping_error.patch
new file mode 100644
index 0000000000..8d6cada842
--- /dev/null
+++ b/target/linux/generic/pending-4.14/340-MIPS-mm-remove-mips_dma_mapping_error.patch
@@ -0,0 +1,32 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 5 Dec 2017 12:34:31 +0100
+Subject: [PATCH] MIPS: mm: remove mips_dma_mapping_error
+
+dma_mapping_error() already checks if ops->mapping_error is a null
+pointer
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/arch/mips/mm/dma-default.c
++++ b/arch/mips/mm/dma-default.c
+@@ -373,11 +373,6 @@ static void mips_dma_sync_sg_for_device(
+ 	}
+ }
+ 
+-static int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+-{
+-	return 0;
+-}
+-
+ static int mips_dma_supported(struct device *dev, u64 mask)
+ {
+ 	return plat_dma_supported(dev, mask);
+@@ -406,7 +401,6 @@ static const struct dma_map_ops mips_def
+ 	.sync_single_for_device = mips_dma_sync_single_for_device,
+ 	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
+ 	.sync_sg_for_device = mips_dma_sync_sg_for_device,
+-	.mapping_error = mips_dma_mapping_error,
+ 	.dma_supported = mips_dma_supported
+ };
+ 
diff --git a/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch b/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
new file mode 100644
index 0000000000..3cd87861a4
--- /dev/null
+++ b/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
@@ -0,0 +1,140 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 5 Dec 2017 12:46:01 +0100
+Subject: [PATCH] MIPS: mm: remove no-op dma_map_ops where possible
+
+If no post-DMA flush is required, and the platform does not provide
+plat_unmap_dma_mem(), there is no need to include unmap or sync_for_cpu
+ops.
+
+With this patch they are compiled out to improve icache footprint
+on devices that handle lots of DMA traffic (especially network routers).
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -220,6 +220,7 @@ config BMIPS_GENERIC
+ 	select BRCMSTB_L2_IRQ
+ 	select IRQ_MIPS_CPU
+ 	select DMA_NONCOHERENT
++	select DMA_UNMAP_POST_FLUSH
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+ 	select SYS_SUPPORTS_BIG_ENDIAN
+@@ -345,6 +346,7 @@ config MACH_JAZZ
+ 	select CSRC_R4K
+ 	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
+ 	select GENERIC_ISA_DMA
++	select DMA_UNMAP_POST_FLUSH
+ 	select HAVE_PCSPKR_PLATFORM
+ 	select IRQ_MIPS_CPU
+ 	select I8253
+@@ -1127,6 +1129,9 @@ config DMA_NONCOHERENT
+ 	bool
+ 	select NEED_DMA_MAP_STATE
+ 
++config DMA_UNMAP_POST_FLUSH
++	bool
++
+ config NEED_DMA_MAP_STATE
+ 	bool
+ 
+@@ -1651,6 +1656,7 @@ config CPU_R10000
+ 	select CPU_SUPPORTS_64BIT_KERNEL
+ 	select CPU_SUPPORTS_HIGHMEM
+ 	select CPU_SUPPORTS_HUGEPAGES
++	select DMA_UNMAP_POST_FLUSH
+ 	help
+ 	  MIPS Technologies R10000-series processors.
+ 
+@@ -1899,9 +1905,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
+ 	bool
+ 
+ config SYS_HAS_CPU_MIPS32_R5
++	select DMA_UNMAP_POST_FLUSH
+ 	bool
+ 
+ config SYS_HAS_CPU_MIPS32_R6
++	select DMA_UNMAP_POST_FLUSH
+ 	bool
+ 
+ config SYS_HAS_CPU_MIPS64_R1
+@@ -1911,6 +1919,7 @@ config SYS_HAS_CPU_MIPS64_R2
+ 	bool
+ 
+ config SYS_HAS_CPU_MIPS64_R6
++	select DMA_UNMAP_POST_FLUSH
+ 	bool
+ 
+ config SYS_HAS_CPU_R3000
+--- a/arch/mips/mm/dma-default.c
++++ b/arch/mips/mm/dma-default.c
+@@ -267,8 +267,9 @@ static inline void __dma_sync(struct pag
+ 	} while (left);
+ }
+ 
+-static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
+-	size_t size, enum dma_data_direction direction, unsigned long attrs)
++static void __maybe_unused
++mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
++		    enum dma_data_direction direction, unsigned long attrs)
+ {
+ 	if (cpu_needs_post_dma_flush(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+ 		__dma_sync(dma_addr_to_page(dev, dma_addr),
+@@ -308,9 +309,10 @@ static dma_addr_t mips_dma_map_page(stru
+ 	return plat_map_dma_mem_page(dev, page) + offset;
+ }
+ 
+-static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+-	int nhwentries, enum dma_data_direction direction,
+-	unsigned long attrs)
++static void __maybe_unused
++mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
++		  int nhwentries, enum dma_data_direction direction,
++		  unsigned long attrs)
+ {
+ 	int i;
+ 	struct scatterlist *sg;
+@@ -325,8 +327,9 @@ static void mips_dma_unmap_sg(struct dev
+ 	}
+ }
+ 
+-static void mips_dma_sync_single_for_cpu(struct device *dev,
+-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
++static void __maybe_unused
++mips_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
++			     size_t size, enum dma_data_direction direction)
+ {
+ 	if (cpu_needs_post_dma_flush(dev))
+ 		__dma_sync(dma_addr_to_page(dev, dma_handle),
+@@ -342,9 +345,9 @@ static void mips_dma_sync_single_for_dev
+ 			   dma_handle & ~PAGE_MASK, size, direction);
+ }
+ 
+-static void mips_dma_sync_sg_for_cpu(struct device *dev,
+-	struct scatterlist *sglist, int nelems,
+-	enum dma_data_direction direction)
++static void __maybe_unused
++mips_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist,
++			 int nelems, enum dma_data_direction direction)
+ {
+ 	int i;
+ 	struct scatterlist *sg;
+@@ -394,12 +397,14 @@ static const struct dma_map_ops mips_def
+ 	.free = mips_dma_free_coherent,
+ 	.mmap = mips_dma_mmap,
+ 	.map_page = mips_dma_map_page,
+-	.unmap_page = mips_dma_unmap_page,
+ 	.map_sg = mips_dma_map_sg,
++#ifdef CONFIG_DMA_UNMAP_POST_FLUSH
++	.unmap_page = mips_dma_unmap_page,
+ 	.unmap_sg = mips_dma_unmap_sg,
+ 	.sync_single_for_cpu = mips_dma_sync_single_for_cpu,
+-	.sync_single_for_device = mips_dma_sync_single_for_device,
+ 	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
++#endif
++	.sync_single_for_device = mips_dma_sync_single_for_device,
+ 	.sync_sg_for_device = mips_dma_sync_sg_for_device,
+ 	.dma_supported = mips_dma_supported
+ };
diff --git a/target/linux/generic/pending-4.14/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-4.14/400-mtd-add-rootfs-split-support.patch
new file mode 100644
index 0000000000..f0c852a695
--- /dev/null
+++ b/target/linux/generic/pending-4.14/400-mtd-add-rootfs-split-support.patch
@@ -0,0 +1,123 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
+
+lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/Kconfig            | 17 +++++++++++++++++
+ drivers/mtd/mtdpart.c          | 35 +++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 3 files changed, 54 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -12,6 +12,23 @@ menuconfig MTD
+ 
+ if MTD
+ 
++menu "OpenWrt specific MTD options"
++
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	default y
++
++config MTD_SPLIT_FIRMWARE
++	bool "Automatically split firmware partition for kernel+rootfs"
++	default y
++
++config MTD_SPLIT_FIRMWARE_NAME
++	string "Firmware partition name"
++	depends on MTD_SPLIT_FIRMWARE
++	default "firmware"
++
++endmenu
++
+ config MTD_TESTS
+ 	tristate "MTD tests support (DANGEROUS)"
+ 	depends on m
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -29,10 +29,12 @@
+ #include <linux/kmod.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/magic.h>
+ #include <linux/of.h>
+ #include <linux/err.h>
+ 
+ #include "mtdcore.h"
++#include "mtdsplit/mtdsplit.h"
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -52,6 +54,8 @@ struct mtd_part {
+ 	struct list_head list;
+ };
+ 
++static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
++
+ /*
+  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+  * the pointer to that structure.
+@@ -686,6 +690,7 @@ int mtd_add_partition(struct mtd_info *p
+ 	mutex_unlock(&mtd_partitions_mutex);
+ 
+ 	add_mtd_device(&new->mtd);
++	mtd_partition_split(parent, new);
+ 
+ 	mtd_add_partition_attrs(new);
+ 
+@@ -764,6 +769,35 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
++#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
++#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
++#else
++#define SPLIT_FIRMWARE_NAME	"unused"
++#endif
++
++static void split_firmware(struct mtd_info *master, struct mtd_part *part)
++{
++}
++
++void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
++                                int offset, int size)
++{
++}
++
++static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
++{
++	static int rootfs_found = 0;
++
++	if (rootfs_found)
++		return;
++
++	if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
++	    IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE))
++		split_firmware(master, part);
++
++	arch_split_mtd_part(master, part->mtd.name, part->offset,
++			    part->mtd.size);
++}
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -795,6 +829,7 @@ int add_mtd_partitions(struct mtd_info *
+ 		mutex_unlock(&mtd_partitions_mutex);
+ 
+ 		add_mtd_device(&slave->mtd);
++		mtd_partition_split(master, slave);
+ 		mtd_add_partition_attrs(slave);
+ 		if (parts[i].types)
+ 			mtd_parse_part(slave, parts[i].types);
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -109,5 +109,7 @@ int mtd_add_partition(struct mtd_info *m
+ 		      long long offset, long long length);
+ int mtd_del_partition(struct mtd_info *master, int partno);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
++extern void __weak arch_split_mtd_part(struct mtd_info *master,
++				       const char *name, int offset, int size);
+ 
+ #endif
diff --git a/target/linux/generic/pending-4.14/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-4.14/401-mtd-add-support-for-different-partition-parser-types.patch
new file mode 100644
index 0000000000..77ee85a8c8
--- /dev/null
+++ b/target/linux/generic/pending-4.14/401-mtd-add-support-for-different-partition-parser-types.patch
@@ -0,0 +1,110 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: mtd: add support for different partition parser types
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          |   56 ++++++++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |   11 ++++++++
+ 2 files changed, 67 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -1034,6 +1034,62 @@ void mtd_part_parser_cleanup(struct mtd_
+ 	}
+ }
+ 
++static struct mtd_part_parser *
++get_partition_parser_by_type(enum mtd_parser_type type,
++			     struct mtd_part_parser *start)
++{
++	struct mtd_part_parser *p, *ret = NULL;
++
++	spin_lock(&part_parser_lock);
++
++	p = list_prepare_entry(start, &part_parsers, list);
++	if (start)
++		mtd_part_parser_put(start);
++
++	list_for_each_entry_continue(p, &part_parsers, list) {
++		if (p->type == type && try_module_get(p->owner)) {
++			ret = p;
++			break;
++		}
++	}
++
++	spin_unlock(&part_parser_lock);
++
++	return ret;
++}
++
++int parse_mtd_partitions_by_type(struct mtd_info *master,
++				 enum mtd_parser_type type,
++				 const struct mtd_partition **pparts,
++				 struct mtd_part_parser_data *data)
++{
++	struct mtd_part_parser *prev = NULL;
++	int ret = 0;
++
++	while (1) {
++		struct mtd_part_parser *parser;
++
++		parser = get_partition_parser_by_type(type, prev);
++		if (!parser)
++			break;
++
++		ret = (*parser->parse_fn)(master, pparts, data);
++
++		if (ret > 0) {
++			mtd_part_parser_put(parser);
++			printk(KERN_NOTICE
++			       "%d %s partitions found on MTD device %s\n",
++			       ret, parser->name, master->name);
++			break;
++		}
++
++		prev = parser;
++	}
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
++
+ int mtd_is_partition(const struct mtd_info *mtd)
+ {
+ 	struct mtd_part *part;
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -68,11 +68,14 @@ struct mtd_part_parser_data {
+ 	unsigned long origin;
+ };
+ 
+-
+ /*
+  * Functions dealing with the various ways of partitioning the space
+  */
+ 
++enum mtd_parser_type {
++	MTD_PARSER_TYPE_DEVICE = 0,
++};
++
+ struct mtd_part_parser {
+ 	struct list_head list;
+ 	struct module *owner;
+@@ -80,6 +83,7 @@ struct mtd_part_parser {
+ 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
+ 			struct mtd_part_parser_data *);
+ 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
++	enum mtd_parser_type type;
+ };
+ 
+ /* Container for passing around a set of parsed partitions */
+@@ -112,4 +116,9 @@ uint64_t mtd_get_device_size(const struc
+ extern void __weak arch_split_mtd_part(struct mtd_info *master,
+ 				       const char *name, int offset, int size);
+ 
++int parse_mtd_partitions_by_type(struct mtd_info *master,
++				 enum mtd_parser_type type,
++				 const struct mtd_partition **pparts,
++				 struct mtd_part_parser_data *data);
++
+ #endif
diff --git a/target/linux/generic/pending-4.14/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-4.14/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
new file mode 100644
index 0000000000..dff9c3166e
--- /dev/null
+++ b/target/linux/generic/pending-4.14/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
@@ -0,0 +1,81 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
+
+lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          | 37 +++++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 2 files changed, 39 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -769,6 +769,36 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
++static int
++run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
++{
++	struct mtd_partition *parts;
++	int nr_parts;
++	int i;
++
++	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
++						NULL);
++	if (nr_parts <= 0)
++		return nr_parts;
++
++	if (WARN_ON(!parts))
++		return 0;
++
++	for (i = 0; i < nr_parts; i++) {
++		/* adjust partition offsets */
++		parts[i].offset += slave->offset;
++
++		mtd_add_partition(slave->parent,
++				  parts[i].name,
++				  parts[i].offset,
++				  parts[i].size);
++	}
++
++	kfree(parts);
++
++	return nr_parts;
++}
++
+ #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #else
+@@ -777,6 +807,7 @@ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
+ static void split_firmware(struct mtd_info *master, struct mtd_part *part)
+ {
++	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
+ }
+ 
+ void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
+@@ -791,6 +822,12 @@ static void mtd_partition_split(struct m
+ 	if (rootfs_found)
+ 		return;
+ 
++	if (!strcmp(part->mtd.name, "rootfs")) {
++		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
++
++		rootfs_found = 1;
++	}
++
+ 	if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
+ 	    IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE))
+ 		split_firmware(master, part);
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -74,6 +74,8 @@ struct mtd_part_parser_data {
+ 
+ enum mtd_parser_type {
+ 	MTD_PARSER_TYPE_DEVICE = 0,
++	MTD_PARSER_TYPE_ROOTFS,
++	MTD_PARSER_TYPE_FIRMWARE,
+ };
+ 
+ struct mtd_part_parser {
diff --git a/target/linux/generic/pending-4.14/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-4.14/403-mtd-hook-mtdsplit-to-Kbuild.patch
new file mode 100644
index 0000000000..89c202bc0d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/403-mtd-hook-mtdsplit-to-Kbuild.patch
@@ -0,0 +1,32 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
+
+lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/Kconfig  | 2 ++
+ drivers/mtd/Makefile | 2 ++
+ 2 files changed, 4 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME
+ 	depends on MTD_SPLIT_FIRMWARE
+ 	default "firmware"
+ 
++source "drivers/mtd/mtdsplit/Kconfig"
++
+ endmenu
+ 
+ config MTD_TESTS
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -7,6 +7,8 @@
+ obj-$(CONFIG_MTD)		+= mtd.o
+ mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
+ 
++obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
++
+ obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/generic/pending-4.14/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-4.14/404-mtd-add-more-helper-functions.patch
new file mode 100644
index 0000000000..97bd7730c8
--- /dev/null
+++ b/target/linux/generic/pending-4.14/404-mtd-add-more-helper-functions.patch
@@ -0,0 +1,94 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.10: add separate rootfs partition parser
+
+lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          | 29 +++++++++++++++++++++++++++++
+ include/linux/mtd/mtd.h        | 18 ++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 3 files changed, 49 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -799,6 +799,17 @@ run_parsers_by_type(struct mtd_part *sla
+ 	return nr_parts;
+ }
+ 
++static inline unsigned long
++mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
++{
++	unsigned long mask = mtd->erasesize - 1;
++
++	len += offset & mask;
++	len = (len + mask) & ~mask;
++	len -= offset & mask;
++	return len;
++}
++
+ #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #else
+@@ -1144,6 +1155,24 @@ int mtd_is_partition(const struct mtd_in
+ }
+ EXPORT_SYMBOL_GPL(mtd_is_partition);
+ 
++struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
++{
++	if (!mtd_is_partition(mtd))
++		return (struct mtd_info *)mtd;
++
++	return mtd_to_part(mtd)->parent;
++}
++EXPORT_SYMBOL_GPL(mtdpart_get_master);
++
++uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
++{
++	if (!mtd_is_partition(mtd))
++		return 0;
++
++	return mtd_to_part(mtd)->offset;
++}
++EXPORT_SYMBOL_GPL(mtdpart_get_offset);
++
+ /* Returns the size of the entire flash chip */
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd)
+ {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -493,6 +493,24 @@ static inline uint32_t mtd_mod_by_eb(uin
+ 	return do_div(sz, mtd->erasesize);
+ }
+ 
++static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
++{
++	if (mtd_mod_by_eb(sz, mtd) == 0)
++		return sz;
++
++	/* Round up to next erase block */
++	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
++}
++
++static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
++{
++	if (mtd_mod_by_eb(sz, mtd) == 0)
++		return sz;
++
++	/* Round down to the start of the current erase block */
++	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
++}
++
+ static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
+ {
+ 	if (mtd->writesize_shift)
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -114,6 +114,8 @@ int mtd_is_partition(const struct mtd_in
+ int mtd_add_partition(struct mtd_info *master, const char *name,
+ 		      long long offset, long long length);
+ int mtd_del_partition(struct mtd_info *master, int partno);
++struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
++uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+ extern void __weak arch_split_mtd_part(struct mtd_info *master,
+ 				       const char *name, int offset, int size);
diff --git a/target/linux/generic/pending-4.14/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-4.14/411-mtd-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..096d6a4e71
--- /dev/null
+++ b/target/linux/generic/pending-4.14/411-mtd-partial_eraseblock_write.patch
@@ -0,0 +1,154 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
+
+lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/mtdpart.c   | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
+ include/linux/mtd/mtd.h |  4 +++
+ 2 files changed, 85 insertions(+), 9 deletions(-)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -36,6 +36,8 @@
+ #include "mtdcore.h"
+ #include "mtdsplit/mtdsplit.h"
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ static DEFINE_MUTEX(mtd_partitions_mutex);
+@@ -241,13 +243,61 @@ static int part_erase(struct mtd_info *m
+ 	struct mtd_part *part = mtd_to_part(mtd);
+ 	int ret;
+ 
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = mtd_read(part->parent,
++				instr->addr + part->offset,
++				part->parent->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->len += instr->erase_buf_ofs;
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->parent->erasesize -
++				do_div(mtd_ofs, part->parent->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = mtd_read(part->parent,
++					part->offset + instr->addr +
++					instr->len - part->parent->erasesize,
++					part->parent->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->parent->_erase(part->parent, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -255,6 +305,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->_erase == part_erase) {
+ 		struct mtd_part *part = mtd_to_part(instr->mtd);
++		size_t wrlen = 0;
++
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->parent->_write(part->parent,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->parent->_write(part->parent,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->parent->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+@@ -598,19 +667,22 @@ static struct mtd_part *allocate_partiti
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32)slave->mtd.size) > parent->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 
+-	tmp = slave->mtd.size;
++	tmp = slave->offset + slave->mtd.size;
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32)slave->mtd.size > parent->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 
+ 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -56,6 +56,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/pending-4.14/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-4.14/412-mtd-partial_eraseblock_unlock.patch
new file mode 100644
index 0000000000..fd6ffc6fa9
--- /dev/null
+++ b/target/linux/generic/pending-4.14/412-mtd-partial_eraseblock_unlock.patch
@@ -0,0 +1,40 @@
+From: Tim Harvey <tharvey@gateworks.com>
+Subject: mtd: allow partial block unlock
+
+This allows sysupgrade for devices such as the Gateworks Avila/Cambria
+product families based on the ixp4xx using the redboot bootloader with
+combined FIS directory and RedBoot config partitions on larger FLASH
+devices with larger eraseblocks.
+
+This second iteration of this patch addresses previous issues:
+- whitespace breakage fixed
+- unlock in all scenarios
+- simplification and fix logic bug
+
+[john@phrozen.org: this should be moved to the ixp4xx folder]
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/mtd/mtdpart.c | 11 ++++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -343,7 +343,16 @@ static int part_lock(struct mtd_info *mt
+ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+ 	struct mtd_part *part = mtd_to_part(mtd);
+-	return part->parent->_unlock(part->parent, ofs + part->offset, len);
++
++	ofs += part->offset;
++
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		/* round up len to next erasesize and round down offset to prev block */
++		len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
++		ofs &= ~(part->parent->erasesize - 1);
++	}
++
++	return part->parent->_unlock(part->parent, ofs, len);
+ }
+ 
+ static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
diff --git a/target/linux/generic/pending-4.14/420-mtd-redboot_space.patch b/target/linux/generic/pending-4.14/420-mtd-redboot_space.patch
new file mode 100644
index 0000000000..85fbe0512d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/420-mtd-redboot_space.patch
@@ -0,0 +1,41 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
+
+[john@phrozen.org: used by ixp and others]
+
+lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/redboot.c | 19 +++++++++++++------
+ 1 file changed, 13 insertions(+), 6 deletions(-)
+
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-4.14/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-4.14/430-mtd-add-myloader-partition-parser.patch
new file mode 100644
index 0000000000..889c452057
--- /dev/null
+++ b/target/linux/generic/pending-4.14/430-mtd-add-myloader-partition-parser.patch
@@ -0,0 +1,47 @@
+From: Florian Fainelli <f.fainelli@gmail.com>
+Subject: Add myloader partition table parser
+
+[john@phozen.org: shoud be upstreamable]
+
+lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ drivers/mtd/Kconfig  | 16 ++++++++++++++++
+ drivers/mtd/Makefile |  1 +
+ 2 files changed, 17 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -178,6 +178,22 @@ menu "Partition parsers"
+ source "drivers/mtd/parsers/Kconfig"
+ endmenu
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on ADM5120 || ATH25 || ATH79
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y				+= parsers/
+ 
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/generic/pending-4.14/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-4.14/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
new file mode 100644
index 0000000000..9299e88671
--- /dev/null
+++ b/target/linux/generic/pending-4.14/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
@@ -0,0 +1,67 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+
+--- a/drivers/mtd/parsers/parser_trx.c
++++ b/drivers/mtd/parsers/parser_trx.c
+@@ -29,6 +29,33 @@ struct trx_header {
+ 	uint32_t offset[3];
+ } __packed;
+ 
++/*
++ * Calculate real end offset (address) for a given amount of data. It checks
++ * all blocks skipping bad ones.
++ */
++static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
++{
++	size_t real_offset = 0;
++
++	if (mtd_block_isbad(mtd, real_offset))
++		pr_warn("Base offset shouldn't be at bad block");
++
++	while (bytes >= mtd->erasesize) {
++		bytes -= mtd->erasesize;
++		real_offset += mtd->erasesize;
++		while (mtd_block_isbad(mtd, real_offset)) {
++			real_offset += mtd->erasesize;
++
++			if (real_offset >= mtd->size)
++				return real_offset - mtd->erasesize;
++		}
++	}
++
++	real_offset += bytes;
++
++	return real_offset;
++}
++
+ static const char *parser_trx_data_part_name(struct mtd_info *master,
+ 					     size_t offset)
+ {
+@@ -83,21 +110,21 @@ static int parser_trx_parse(struct mtd_i
+ 	if (trx.offset[2]) {
+ 		part = &parts[curr_part++];
+ 		part->name = "loader";
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
+ 		i++;
+ 	}
+ 
+ 	if (trx.offset[i]) {
+ 		part = &parts[curr_part++];
+ 		part->name = "linux";
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
+ 		i++;
+ 	}
+ 
+ 	if (trx.offset[i]) {
+ 		part = &parts[curr_part++];
+ 		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
+ 		i++;
+ 	}
+ 
diff --git a/target/linux/generic/pending-4.14/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-4.14/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
new file mode 100644
index 0000000000..a6d0828b99
--- /dev/null
+++ b/target/linux/generic/pending-4.14/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
@@ -0,0 +1,37 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: mtd: bcm47xxpart: detect T_Meter partition
+
+It can be found on many Netgear devices. It consists of many 0x30 blocks
+starting with 4D 54.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -39,6 +39,7 @@
+ #define NVRAM_HEADER			0x48534C46	/* FLSH */
+ #define POT_MAGIC1			0x54544f50	/* POTT */
+ #define POT_MAGIC2			0x504f		/* OP */
++#define T_METER_MAGIC			0x4D540000	/* MT */
+ #define ML_MAGIC1			0x39685a42
+ #define ML_MAGIC2			0x26594131
+ #define TRX_MAGIC			0x30524448
+@@ -182,6 +183,15 @@ static int bcm47xxpart_parse(struct mtd_
+ 					     MTD_WRITEABLE);
+ 			continue;
+ 		}
++
++		/* T_Meter */
++		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
++		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
++		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
++			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
++					     MTD_WRITEABLE);
++			continue;
++		}
+ 
+ 		/* TRX */
+ 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-4.14/440-block2mtd_init.patch b/target/linux/generic/pending-4.14/440-block2mtd_init.patch
new file mode 100644
index 0000000000..8834788732
--- /dev/null
+++ b/target/linux/generic/pending-4.14/440-block2mtd_init.patch
@@ -0,0 +1,116 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: block2mtd
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/devices/block2mtd.c | 30 ++++++++++++++++++++----------
+ 1 file changed, 20 insertions(+), 10 deletions(-)
+
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -26,6 +26,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+ #include <linux/slab.h>
+@@ -219,7 +220,7 @@ static void block2mtd_free_device(struct
+ 
+ 
+ static struct block2mtd_dev *add_device(char *devname, int erase_size,
+-		int timeout)
++		const char *mtdname, int timeout)
+ {
+ #ifndef MODULE
+ 	int i;
+@@ -227,6 +228,7 @@ static struct block2mtd_dev *add_device(
+ 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ 	struct block_device *bdev = ERR_PTR(-ENODEV);
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -283,13 +285,16 @@ static struct block2mtd_dev *add_device(
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+-	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
++	if (!mtdname)
++		mtdname = devname;
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto err_destroy_mutex;
+ 
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.writebufsize = PAGE_SIZE;
+@@ -302,7 +307,11 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (mtd_device_register(&dev->mtd, NULL, 0)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (mtd_device_register(&dev->mtd, part, 1)) {
+ 		/* Device didn't get added, so free the entry */
+ 		goto err_destroy_mutex;
+ 	}
+@@ -310,8 +319,7 @@ static struct block2mtd_dev *add_device(
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
+ 		dev->mtd.index,
+-		dev->mtd.name + strlen("block2mtd: "),
+-		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++		mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ err_destroy_mutex:
+@@ -384,7 +392,7 @@ static int block2mtd_setup2(const char *
+ 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
+ 	char buf[80 + 12 + 80 + 8];
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
+@@ -398,7 +406,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str) {
+@@ -424,8 +432,10 @@ static int block2mtd_setup2(const char *
+ 			return 0;
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		pr_err("mtd device name too long\n");
+ 
+-	add_device(name, erase_size, timeout);
++	add_device(name, erase_size, token[2], timeout);
+ 
+ 	return 0;
+ }
+@@ -459,7 +469,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/pending-4.14/441-block2mtd_probe.patch b/target/linux/generic/pending-4.14/441-block2mtd_probe.patch
new file mode 100644
index 0000000000..fee970ab61
--- /dev/null
+++ b/target/linux/generic/pending-4.14/441-block2mtd_probe.patch
@@ -0,0 +1,47 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: block2mtd
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/devices/block2mtd.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -392,7 +392,7 @@ static int block2mtd_setup2(const char *
+ 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
+ 	char buf[80 + 12 + 80 + 8];
+ 	char *str = buf;
+-	char *token[3];
++	char *token[4];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
+@@ -406,7 +406,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 3; i++)
++	for (i = 0; i < 4; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str) {
+@@ -435,6 +435,9 @@ static int block2mtd_setup2(const char *
+ 	if (token[2] && (strlen(token[2]) + 1 > 80))
+ 		pr_err("mtd device name too long\n");
+ 
++	if (token[3] && kstrtoul(token[3], 0, &timeout))
++		pr_err("invalid timeout\n");
++
+ 	add_device(name, erase_size, token[2], timeout);
+ 
+ 	return 0;
+@@ -469,7 +472,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/pending-4.14/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-4.14/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
new file mode 100644
index 0000000000..41f9d31cb0
--- /dev/null
+++ b/target/linux/generic/pending-4.14/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: disable cfi cmdset 0002 erase suspend
+
+on some platforms, erase suspend leads to data corruption and lockups when write
+ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
+rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
+simply disable erase suspend, as it will usually not produce any useful gain on
+the small filesystems used on embedded hardware.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -811,7 +811,7 @@ static int get_chip(struct map_info *map
+ 		return 0;
+ 
+ 	case FL_ERASING:
+-		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
++		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+ 		    !(mode == FL_READY || mode == FL_POINT ||
+ 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
+ 			goto sleep;
diff --git a/target/linux/generic/pending-4.14/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-4.14/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
new file mode 100644
index 0000000000..f4ba5b72f7
--- /dev/null
+++ b/target/linux/generic/pending-4.14/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
@@ -0,0 +1,17 @@
+From: George Kashperko <george@znau.edu.ua>
+Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
+
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
+ 1 file changed, 1 insertion(+)
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1832,6 +1832,7 @@ static int __xipram do_write_buffer(stru
+ 
+ 	/* Write Buffer Load */
+ 	map_write(map, CMD(0x25), cmd_adr);
++	(void) map_read(map, cmd_adr);
+ 
+ 	chip->state = FL_WRITING_TO_BUFFER;
+ 
diff --git a/target/linux/generic/pending-4.14/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-4.14/465-m25p80-mx-disable-software-protection.patch
new file mode 100644
index 0000000000..89d38ec303
--- /dev/null
+++ b/target/linux/generic/pending-4.14/465-m25p80-mx-disable-software-protection.patch
@@ -0,0 +1,18 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: Disable software protection bits for Macronix flashes.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2715,6 +2715,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+ 
+ 	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
+ 	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||
++	    JEDEC_MFR(info) == SNOR_MFR_MACRONIX ||
+ 	    JEDEC_MFR(info) == SNOR_MFR_SST ||
+ 	    info->flags & SPI_NOR_HAS_LOCK) {
+ 		write_enable(nor);
diff --git a/target/linux/generic/pending-4.14/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-4.14/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
new file mode 100644
index 0000000000..10db289cc9
--- /dev/null
+++ b/target/linux/generic/pending-4.14/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
@@ -0,0 +1,56 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 4 Nov 2017 07:40:23 +0100
+Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
+ flash size
+
+Some devices need 4K sectors to be able to deal with small flash chips.
+For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
+entire chip is just one erase block.
+On bigger flash chip sizes, using 4K sectors can significantly slow down
+many operations, including using a writable filesystem. There are several
+platforms where it makes sense to use a single kernel on both kinds of
+devices.
+
+To support this properly, allow configuring an upper flash chip size
+limit for 4K sectors support.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/mtd/spi-nor/Kconfig
++++ b/drivers/mtd/spi-nor/Kconfig
+@@ -39,6 +39,17 @@ config SPI_ASPEED_SMC
+ 	  and support for the SPI flash memory controller (SPI) for
+ 	  the host firmware. The implementation only supports SPI NOR.
+ 
++config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
++	int "Maximum flash chip size to use 4K sectors on (in KiB)"
++	depends on MTD_SPI_NOR_USE_4K_SECTORS
++	default "4096"
++	help
++	  There are many flash chips that support 4K sectors, but are so large
++	  that using them significantly slows down writing large amounts of
++	  data or using a writable filesystem.
++	  Any flash chip larger than the size specified in this option will
++	  not use 4K sectors.
++
+ config SPI_ATMEL_QUADSPI
+ 	tristate "Atmel Quad SPI Controller"
+ 	depends on ARCH_AT91 || (ARM && COMPILE_TEST)
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2562,10 +2562,12 @@ static int spi_nor_select_erase(struct s
+ 
+ #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ 	/* prefer "small sector" erase if possible */
+-	if (info->flags & SECT_4K) {
++	if ((info->flags & SECT_4K) && (mtd->size <=
++	    CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
+ 		nor->erase_opcode = SPINOR_OP_BE_4K;
+ 		mtd->erasesize = 4096;
+-	} else if (info->flags & SECT_4K_PMC) {
++	} else if ((info->flags & SECT_4K_PMC) && (mtd->size <=
++		   CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
+ 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+ 		mtd->erasesize = 4096;
+ 	} else
diff --git a/target/linux/generic/pending-4.14/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-4.14/476-mtd-spi-nor-add-eon-en25q128.patch
new file mode 100644
index 0000000000..ac1fda5159
--- /dev/null
+++ b/target/linux/generic/pending-4.14/476-mtd-spi-nor-add-eon-en25q128.patch
@@ -0,0 +1,18 @@
+From: Piotr Dymacz <pepe2k@gmail.com>
+Subject: kernel/mtd: add support for EON EN25Q128
+
+Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -954,6 +954,7 @@ static const struct flash_info spi_nor_i
+ 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+ 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+ 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
++	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
+ 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
+ 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+ 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
diff --git a/target/linux/generic/pending-4.14/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/pending-4.14/477-mtd-add-spi-nor-add-mx25u3235f.patch
new file mode 100644
index 0000000000..191e01df7a
--- /dev/null
+++ b/target/linux/generic/pending-4.14/477-mtd-add-spi-nor-add-mx25u3235f.patch
@@ -0,0 +1,18 @@
+From: André Valentin <avalentin@marcant.net>
+Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
+
+Signed-off-by: André Valentin <avalentin@marcant.net>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1016,6 +1016,7 @@ static const struct flash_info spi_nor_i
+ 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
++	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024, 64, 0) },
+ 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+ 	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+ 	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
diff --git a/target/linux/generic/pending-4.14/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-4.14/480-mtd-set-rootfs-to-be-root-dev.patch
new file mode 100644
index 0000000000..6cddaf01b7
--- /dev/null
+++ b/target/linux/generic/pending-4.14/480-mtd-set-rootfs-to-be-root-dev.patch
@@ -0,0 +1,38 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
+
+The current code only allows to automatically set
+root device on MTD partitions. Move the code to MTD
+core to allow to use it with all MTD devices.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdcore.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -41,6 +41,7 @@
+ #include <linux/reboot.h>
+ #include <linux/leds.h>
+ #include <linux/debugfs.h>
++#include <linux/root_dev.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+@@ -578,6 +579,15 @@ int add_mtd_device(struct mtd_info *mtd)
+ 	   of this try_ nonsense, and no bitching about it
+ 	   either. :) */
+ 	__module_get(THIS_MODULE);
++
++	if (!strcmp(mtd->name, "rootfs") &&
++	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    ROOT_DEV == 0) {
++		pr_notice("mtd: device %d (%s) set to be root filesystem\n",
++			  mtd->index, mtd->name);
++		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
++	}
++
+ 	return 0;
+ 
+ fail_added:
diff --git a/target/linux/generic/pending-4.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-4.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
new file mode 100644
index 0000000000..523a69c873
--- /dev/null
+++ b/target/linux/generic/pending-4.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
@@ -0,0 +1,73 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/drivers/mtd/ubi/build.c
++++ b/drivers/mtd/ubi/build.c
+@@ -1157,6 +1157,49 @@ static struct mtd_info * __init open_mtd
+ 	return mtd;
+ }
+ 
++/*
++ * This function tries attaching mtd partitions named either "ubi" or "data"
++ * during boot.
++ */
++static void __init ubi_auto_attach(void)
++{
++	int err;
++	struct mtd_info *mtd;
++
++	/* try attaching mtd device named "ubi" or "data" */
++	mtd = open_mtd_device("ubi");
++	if (IS_ERR(mtd))
++		mtd = open_mtd_device("data");
++
++	if (!IS_ERR(mtd)) {
++		size_t len;
++		char magic[4];
++
++		/* check for a valid ubi magic */
++		err = mtd_read(mtd, 0, 4, &len, (void *) magic);
++		if (!err && len == 4 && strncmp(magic, "UBI#", 4)) {
++			pr_err("UBI error: no valid UBI magic found inside mtd%d", mtd->index);
++			put_mtd_device(mtd);
++			return;
++		}
++
++		/* auto-add only media types where UBI makes sense */
++		if (mtd->type == MTD_NANDFLASH ||
++		    mtd->type == MTD_NORFLASH ||
++		    mtd->type == MTD_DATAFLASH ||
++		    mtd->type == MTD_MLCNANDFLASH) {
++			mutex_lock(&ubi_devices_mutex);
++			pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
++			err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
++			mutex_unlock(&ubi_devices_mutex);
++			if (err < 0) {
++				pr_err("UBI error: cannot attach mtd%d", mtd->index);
++				put_mtd_device(mtd);
++			}
++		}
++	}
++}
++
+ static int __init ubi_init(void)
+ {
+ 	int err, i, k;
+@@ -1240,6 +1283,12 @@ static int __init ubi_init(void)
+ 		}
+ 	}
+ 
++	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
++	 * parameter was given */
++	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    !ubi_is_module() && !mtd_devs)
++		ubi_auto_attach();
++
+ 	err = ubiblock_init();
+ 	if (err) {
+ 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
diff --git a/target/linux/generic/pending-4.14/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-4.14/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
new file mode 100644
index 0000000000..f8dc1bcb28
--- /dev/null
+++ b/target/linux/generic/pending-4.14/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
@@ -0,0 +1,66 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: auto-create ubiblock device for rootfs
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+
+--- a/drivers/mtd/ubi/block.c
++++ b/drivers/mtd/ubi/block.c
+@@ -625,6 +625,44 @@ static void __init ubiblock_create_from_
+ 	}
+ }
+ 
++#define UBIFS_NODE_MAGIC  0x06101831
++static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
++{
++	int ret;
++	uint32_t magic_of, magic;
++	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
++	if (ret)
++		return 0;
++	magic = le32_to_cpu(magic_of);
++	return magic == UBIFS_NODE_MAGIC;
++}
++
++static void __init ubiblock_create_auto_rootfs(void)
++{
++	int ubi_num, ret, is_ubifs;
++	struct ubi_volume_desc *desc;
++	struct ubi_volume_info vi;
++
++	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
++		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
++		if (IS_ERR(desc))
++			continue;
++
++		ubi_get_volume_info(desc, &vi);
++		is_ubifs = ubi_vol_is_ubifs(desc);
++		ubi_close_volume(desc);
++		if (is_ubifs)
++			break;
++
++		ret = ubiblock_create(&vi);
++		if (ret)
++			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
++				vi.name, ret);
++		/* always break if we get here */
++		break;
++	}
++}
++
+ static void ubiblock_remove_all(void)
+ {
+ 	struct ubiblock *next;
+@@ -655,6 +693,10 @@ int __init ubiblock_init(void)
+ 	 */
+ 	ubiblock_create_from_param();
+ 
++	/* auto-attach "rootfs" volume if existing and non-ubifs */
++	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
++		ubiblock_create_auto_rootfs();
++
+ 	/*
+ 	 * Block devices are only created upon user requests, so we ignore
+ 	 * existing volumes.
diff --git a/target/linux/generic/pending-4.14/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-4.14/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
new file mode 100644
index 0000000000..69a35c25e7
--- /dev/null
+++ b/target/linux/generic/pending-4.14/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
@@ -0,0 +1,51 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ init/do_mounts.c | 26 +++++++++++++++++++++++++-
+ 1 file changed, 25 insertions(+), 1 deletion(-)
+
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -438,7 +438,28 @@ retry:
+ out:
+ 	put_page(page);
+ }
+- 
++
++static int __init mount_ubi_rootfs(void)
++{
++	int flags = MS_SILENT;
++	int err, tried = 0;
++
++	while (tried < 2) {
++		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
++					root_mount_data);
++		switch (err) {
++			case -EACCES:
++				flags |= MS_RDONLY;
++				tried++;
++				break;
++			default:
++				return err;
++		}
++	}
++
++	return -EINVAL;
++}
++
+ #ifdef CONFIG_ROOT_NFS
+ 
+ #define NFSROOT_TIMEOUT_MIN	5
+@@ -532,6 +553,10 @@ void __init mount_root(void)
+ 			change_floppy("root floppy");
+ 	}
+ #endif
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++	if (!mount_ubi_rootfs())
++		return;
++#endif
+ #ifdef CONFIG_BLOCK
+ 	{
+ 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-4.14/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-4.14/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
new file mode 100644
index 0000000000..06cd1b62ac
--- /dev/null
+++ b/target/linux/generic/pending-4.14/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
@@ -0,0 +1,34 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/block.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/ubi/block.c
++++ b/drivers/mtd/ubi/block.c
+@@ -50,6 +50,7 @@
+ #include <linux/scatterlist.h>
+ #include <linux/idr.h>
+ #include <asm/div64.h>
++#include <linux/root_dev.h>
+ 
+ #include "ubi-media.h"
+ #include "ubi.h"
+@@ -445,6 +446,15 @@ int ubiblock_create(struct ubi_volume_in
+ 	add_disk(dev->gd);
+ 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
+ 		 dev->ubi_num, dev->vol_id, vi->name);
++
++	if (!strcmp(vi->name, "rootfs") &&
++	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    ROOT_DEV == 0) {
++		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
++			  dev->ubi_num, dev->vol_id, vi->name);
++		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
++	}
++
+ 	return 0;
+ 
+ out_free_queue:
diff --git a/target/linux/generic/pending-4.14/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-4.14/494-mtd-ubi-add-EOF-marker-support.patch
new file mode 100644
index 0000000000..99cc0f6cdc
--- /dev/null
+++ b/target/linux/generic/pending-4.14/494-mtd-ubi-add-EOF-marker-support.patch
@@ -0,0 +1,60 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: mtd: add EOF marker support to the UBI layer
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
+ drivers/mtd/ubi/ubi.h    |  1 +
+ 2 files changed, 23 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/ubi/attach.c
++++ b/drivers/mtd/ubi/attach.c
+@@ -939,6 +939,13 @@ static bool vol_ignored(int vol_id)
+ #endif
+ }
+ 
++static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
++{
++	return ech->padding1[0] == 'E' &&
++	       ech->padding1[1] == 'O' &&
++	       ech->padding1[2] == 'F';
++}
++
+ /**
+  * scan_peb - scan and process UBI headers of a PEB.
+  * @ubi: UBI device description object
+@@ -971,9 +978,21 @@ static int scan_peb(struct ubi_device *u
+ 		return 0;
+ 	}
+ 
+-	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+-	if (err < 0)
+-		return err;
++	if (!ai->eof_found) {
++		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
++		if (err < 0)
++			return err;
++
++		if (ec_hdr_has_eof(ech)) {
++			pr_notice("UBI: EOF marker found, PEBs from %d will be erased",
++				pnum);
++			ai->eof_found = true;
++		}
++	}
++
++	if (ai->eof_found)
++		err = UBI_IO_FF_BITFLIPS;
++
+ 	switch (err) {
+ 	case 0:
+ 		break;
+--- a/drivers/mtd/ubi/ubi.h
++++ b/drivers/mtd/ubi/ubi.h
+@@ -778,6 +778,7 @@ struct ubi_attach_info {
+ 	int mean_ec;
+ 	uint64_t ec_sum;
+ 	int ec_count;
++	bool eof_found;
+ 	struct kmem_cache *aeb_slab_cache;
+ 	struct ubi_ec_hdr *ech;
+ 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-4.14/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-4.14/530-jffs2_make_lzma_available.patch
new file mode 100644
index 0000000000..046e9d54d3
--- /dev/null
+++ b/target/linux/generic/pending-4.14/530-jffs2_make_lzma_available.patch
@@ -0,0 +1,5180 @@
+From: Alexandros C. Couloumbis <alex@ozo.com>
+Subject: fs: add jffs2/lzma support (not activated by default yet)
+
+lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
+Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
+---
+ fs/jffs2/Kconfig             |    9 +
+ fs/jffs2/Makefile            |    3 +
+ fs/jffs2/compr.c             |    6 +
+ fs/jffs2/compr.h             |   10 +-
+ fs/jffs2/compr_lzma.c        |  128 +++
+ fs/jffs2/super.c             |   33 +-
+ include/linux/lzma.h         |   62 ++
+ include/linux/lzma/LzFind.h  |  115 +++
+ include/linux/lzma/LzHash.h  |   54 +
+ include/linux/lzma/LzmaDec.h |  231 +++++
+ include/linux/lzma/LzmaEnc.h |   80 ++
+ include/linux/lzma/Types.h   |  226 +++++
+ include/uapi/linux/jffs2.h   |    1 +
+ lib/Kconfig                  |    6 +
+ lib/Makefile                 |   12 +
+ lib/lzma/LzFind.c            |  761 ++++++++++++++
+ lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
+ lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
+ lib/lzma/Makefile            |    7 +
+ 19 files changed, 5008 insertions(+), 6 deletions(-)
+ create mode 100644 fs/jffs2/compr_lzma.c
+ create mode 100644 include/linux/lzma.h
+ create mode 100644 include/linux/lzma/LzFind.h
+ create mode 100644 include/linux/lzma/LzHash.h
+ create mode 100644 include/linux/lzma/LzmaDec.h
+ create mode 100644 include/linux/lzma/LzmaEnc.h
+ create mode 100644 include/linux/lzma/Types.h
+ create mode 100644 lib/lzma/LzFind.c
+ create mode 100644 lib/lzma/LzmaDec.c
+ create mode 100644 lib/lzma/LzmaEnc.c
+ create mode 100644 lib/lzma/Makefile
+
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -139,6 +139,15 @@ config JFFS2_LZO
+ 	  This feature was added in July, 2007. Say 'N' if you need
+ 	  compatibility with older bootloaders or kernels.
+ 
++config JFFS2_LZMA
++	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++	select LZMA_COMPRESS
++	select LZMA_DECOMPRESS
++	depends on JFFS2_FS
++	default n
++	help
++	  JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ 	depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -29,9 +29,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY  20
+ #define JFFS2_LZARI_PRIORITY     30
+ #define JFFS2_RTIME_PRIORITY     50
+-#define JFFS2_ZLIB_PRIORITY      60
+-#define JFFS2_LZO_PRIORITY       80
+-
++#define JFFS2_LZMA_PRIORITY      70
++#define JFFS2_ZLIB_PRIORITY      80
++#define JFFS2_LZO_PRIORITY       90
+ 
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+ 
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++	static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++	{
++		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++		return -ENOMEM;
++	}
++
++	if (LzmaEnc_SetProps(p, props) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++	
++	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++
++        return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++			      uint32_t *sourcelen, uint32_t *dstlen)
++{
++	SizeT compress_size = (SizeT)(*dstlen);
++	int ret;
++
++	#ifdef __KERNEL__
++		mutex_lock(&deflate_mutex);
++	#endif
++
++	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++		0, NULL, &lzma_alloc, &lzma_alloc);
++
++	#ifdef __KERNEL__
++		mutex_unlock(&deflate_mutex);
++	#endif
++
++	if (ret != SZ_OK)
++		return -1;
++
++	*dstlen = (uint32_t)compress_size;
++
++	return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++				 uint32_t srclen, uint32_t destlen)
++{
++	int ret;
++	SizeT dl = (SizeT)destlen;
++	SizeT sl = (SizeT)srclen;
++	ELzmaStatus status;
++	
++	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++		return -1;
++
++	return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++	.priority = JFFS2_LZMA_PRIORITY,
++	.name = "lzma",
++	.compr = JFFS2_COMPR_LZMA,
++	.compress = &jffs2_lzma_compress,
++	.decompress = &jffs2_lzma_decompress,
++	.disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++        int ret;
++	CLzmaEncProps props;
++	LzmaEncProps_Init(&props);
++
++        props.dictSize = LZMA_BEST_DICT(0x2000);
++        props.level = LZMA_BEST_LEVEL;
++        props.lc = LZMA_BEST_LC;
++        props.lp = LZMA_BEST_LP;
++        props.pb = LZMA_BEST_PB;
++        props.fb = LZMA_BEST_FB;
++
++	ret = lzma_alloc_workspace(&props);
++        if (ret < 0)
++                return ret;
++
++	ret = jffs2_register_compressor(&jffs2_lzma_comp);
++	if (ret)
++		lzma_free_workspace();
++	
++        return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++	jffs2_unregister_compressor(&jffs2_lzma_comp);
++	lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -372,14 +372,41 @@ static int __init init_jffs2_fs(void)
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+ 
+-	pr_info("version 2.2."
++	pr_info("version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ 	       " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+-	       " (SUMMARY) "
++	       " (SUMMARY)"
+ #endif
+-	       " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++	       " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++	       " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++	       " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++	       " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++	       " (RUBIN)"
++#endif
++#ifdef  CONFIG_JFFS2_CMODE_NONE
++	       " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++	       " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++	       " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++	       " (CMODE_FAVOURLZO)"
++#endif
++	       " (c) 2001-2006 Red Hat, Inc.\n");
+ 
+ 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ 					     sizeof(struct jffs2_inode_info),
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++	#include <linux/kernel.h>
++	#include <linux/sched.h>
++	#include <linux/slab.h>
++	#include <linux/vmalloc.h>
++	#include <linux/init.h>
++	#define LZMA_MALLOC vmalloc
++	#define LZMA_FREE vfree
++	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++	#define INIT __init
++	#define STATIC static
++#else
++	#include <stdint.h>
++	#include <stdlib.h>
++	#include <stdio.h>
++	#include <unistd.h>
++	#include <string.h>
++	#include <asm/types.h>
++	#include <errno.h>
++	#include <linux/jffs2.h>
++	#ifndef PAGE_SIZE
++		extern int page_size;
++		#define PAGE_SIZE page_size
++	#endif
++	#define LZMA_MALLOC malloc
++	#define LZMA_FREE free
++	#define PRINT_ERROR(msg) fprintf(stderr, msg)
++	#define INIT
++	#define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC    (0)
++#define LZMA_BEST_LP    (0)
++#define LZMA_BEST_PB    (0)
++#define LZMA_BEST_FB  (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++        if (size == 0)
++                return NULL;
++
++        return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++        if (address != NULL)
++                LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++  Byte *buffer;
++  UInt32 pos;
++  UInt32 posLimit;
++  UInt32 streamPos;
++  UInt32 lenLimit;
++
++  UInt32 cyclicBufferPos;
++  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++  UInt32 matchMaxLen;
++  CLzRef *hash;
++  CLzRef *son;
++  UInt32 hashMask;
++  UInt32 cutValue;
++
++  Byte *bufferBase;
++  ISeqInStream *stream;
++  int streamEndWasReached;
++
++  UInt32 blockSize;
++  UInt32 keepSizeBefore;
++  UInt32 keepSizeAfter;
++
++  UInt32 numHashBytes;
++  int directInput;
++  size_t directInputRem;
++  int btMode;
++  int bigHash;
++  UInt32 historySize;
++  UInt32 fixedHashSize;
++  UInt32 hashSizeSum;
++  UInt32 numSons;
++  SRes result;
++  UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++     historySize <= 3 GB
++     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++    UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++  Mf_Init_Func Init;
++  Mf_GetIndexByte_Func GetIndexByte;
++  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++  Mf_GetMatches_Func GetMatches;
++  Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++  hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++   but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++  unsigned lc, lp, pb;
++  UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++  SZ_OK
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++  CLzmaProps prop;
++  CLzmaProb *probs;
++  Byte *dic;
++  const Byte *buf;
++  UInt32 range, code;
++  SizeT dicPos;
++  SizeT dicBufSize;
++  UInt32 processedPos;
++  UInt32 checkDicSize;
++  unsigned state;
++  UInt32 reps[4];
++  unsigned remainLen;
++  int needFlush;
++  int needInitState;
++  UInt32 numProbs;
++  unsigned tempBufSize;
++  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++  LZMA_FINISH_ANY,   /* finish at any point */
++  LZMA_FINISH_END    /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++   You must use LZMA_FINISH_END, when you know that current output buffer
++   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++   and output value of destLen will be less than output buffer size limit.
++   You can check status result also.
++
++   You can use multiple checks to test data integrity after full decompression:
++     1) Check Result and "status" variable.
++     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++        You must use correct finish mode in that case. */
++
++typedef enum
++{
++  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
++  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
++  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
++  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
++  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++     1) Dictionary Interface
++     2) Buffer Interface
++     3) One Call Interface
++   You can select any of these interfaces, but don't mix functions from different
++   groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++     1) LzmaDec_Allocate / LzmaDec_Free
++     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++   You can use variant 2, if you set dictionary buffer manually.
++   For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++  SZ_OK
++  SZ_ERROR_MEM         - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++   
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++   dictionary to some other external buffer.
++   You must work with CLzmaDec variables directly in this interface.
++
++   STEPS:
++     LzmaDec_Constr()
++     LzmaDec_Allocate()
++     for (each new stream)
++     {
++       LzmaDec_Init()
++       while (it needs more decompression)
++       {
++         LzmaDec_DecodeToDic()
++         use data from CLzmaDec::dic and update CLzmaDec::dicPos
++       }
++     }
++     LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++   
++   The decoding to internal dictionary buffer (CLzmaDec::dic).
++   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (dicLimit).
++  LZMA_FINISH_ANY - Decode just dicLimit bytes.
++  LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_NEEDS_MORE_INPUT
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++   See LzmaDec_DecodeToDic description for information about STEPS and return results,
++   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++   to work with CLzmaDec variables manually.
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++  SZ_ERROR_MEM  - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/*  LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++  int level;       /*  0 <= level <= 9 */
++  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++                       default = (1 << 24) */
++  int lc;          /* 0 <= lc <= 8, default = 3 */
++  int lp;          /* 0 <= lp <= 4, default = 0 */
++  int pb;          /* 0 <= pb <= 4, default = 2 */
++  int algo;        /* 0 - fast, 1 - normal, default = 1 */
++  int fb;          /* 5 <= fb <= 273, default = 32 */
++  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++  int numHashBytes; /* 2, 3 or 4, default = 4 */
++  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
++  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++  int numThreads;  /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++  SZ_OK           - OK
++  SZ_ERROR_MEM    - Memory allocation error
++  SZ_ERROR_PARAM  - Incorrect paramater in props
++  SZ_ERROR_WRITE  - Write callback error.
++  SZ_ERROR_PROGRESS - some break from progress callback
++  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++  SZ_OK               - OK
++  SZ_ERROR_MEM        - Memory allocation error
++  SZ_ERROR_PARAM      - Incorrect paramater
++  SZ_ERROR_OUTPUT_EOF - output buffer overflow
++  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++   NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++  size_t (*Write)(void *p, const void *buf, size_t size);
++    /* Returns: result - the number of actually written bytes.
++       (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++  SZ_SEEK_SET = 0,
++  SZ_SEEK_CUR = 1,
++  SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++  SRes (*Look)(void *p, void **buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) > input(*size)) is not allowed
++       (output(*size) < input(*size)) is allowed */
++  SRes (*Skip)(void *p, size_t offset);
++    /* offset must be <= output(*size) of Look */
++
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* reads directly (without buffer). It's same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++  ILookInStream s;
++  ISeekInStream *realStream;
++  size_t pos;
++  size_t size;
++  Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++    /* Returns: result. (result != SZ_OK) means break.
++       Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++  void *(*Alloc)(void *p, size_t size);
++  void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/include/uapi/linux/jffs2.h
++++ b/include/uapi/linux/jffs2.h
+@@ -46,6 +46,7 @@
+ #define JFFS2_COMPR_DYNRUBIN	0x05
+ #define JFFS2_COMPR_ZLIB	0x06
+ #define JFFS2_COMPR_LZO		0x07
++#define JFFS2_COMPR_LZMA	0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -259,6 +259,12 @@ config ZSTD_DECOMPRESS
+ 
+ source "lib/xz/Kconfig"
+ 
++config LZMA_COMPRESS
++    tristate
++
++config LZMA_DECOMPRESS
++    tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -3,6 +3,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+ 
++ifdef CONFIG_JFFS2_ZLIB
++	CONFIG_ZLIB_INFLATE:=y
++	CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++	CONFIG_LZMA_DECOMPRESS:=y
++	CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
+@@ -122,6 +132,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
+ obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
+ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  if (!p->directInput)
++  {
++    alloc->Free(alloc, p->bufferBase);
++    p->bufferBase = 0;
++  }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++  if (p->directInput)
++  {
++    p->blockSize = blockSize;
++    return 1;
++  }
++  if (p->bufferBase == 0 || p->blockSize != blockSize)
++  {
++    LzInWindow_Free(p, alloc);
++    p->blockSize = blockSize;
++    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++  }
++  return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++  p->posLimit -= subValue;
++  p->pos -= subValue;
++  p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++  if (p->streamEndWasReached || p->result != SZ_OK)
++    return;
++  if (p->directInput)
++  {
++    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++    if (curSize > p->directInputRem)
++      curSize = (UInt32)p->directInputRem;
++    p->directInputRem -= curSize;
++    p->streamPos += curSize;
++    if (p->directInputRem == 0)
++      p->streamEndWasReached = 1;
++    return;
++  }
++  for (;;)
++  {
++    Byte *dest = p->buffer + (p->streamPos - p->pos);
++    size_t size = (p->bufferBase + p->blockSize - dest);
++    if (size == 0)
++      return;
++    p->result = p->stream->Read(p->stream, dest, &size);
++    if (p->result != SZ_OK)
++      return;
++    if (size == 0)
++    {
++      p->streamEndWasReached = 1;
++      return;
++    }
++    p->streamPos += (UInt32)size;
++    if (p->streamPos - p->pos > p->keepSizeAfter)
++      return;
++  }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++  memmove(p->bufferBase,
++    p->buffer - p->keepSizeBefore,
++    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++  p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++  if (p->directInput)
++    return 0;
++  /* if (p->streamEndWasReached) return 0; */
++  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++  if (p->streamEndWasReached)
++    return;
++  if (p->keepSizeAfter >= p->streamPos - p->pos)
++    MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++  if (MatchFinder_NeedMove(p))
++    MatchFinder_MoveBlock(p);
++  MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++  p->cutValue = 32;
++  p->btMode = 1;
++  p->numHashBytes = 4;
++  p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++  UInt32 i;
++  p->bufferBase = 0;
++  p->directInput = 0;
++  p->hash = 0;
++  MatchFinder_SetDefaultSettings(p);
++
++  for (i = 0; i < 256; i++)
++  {
++    UInt32 r = i;
++    int j;
++    for (j = 0; j < 8; j++)
++      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++    p->crc[i] = r;
++  }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->hash);
++  p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  MatchFinder_FreeThisClassMemory(p, alloc);
++  LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++  if (sizeInBytes / sizeof(CLzRef) != num)
++    return 0;
++  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc)
++{
++  UInt32 sizeReserv;
++  if (historySize > kMaxHistorySize)
++  {
++    MatchFinder_Free(p, alloc);
++    return 0;
++  }
++  sizeReserv = historySize >> 1;
++  if (historySize > ((UInt32)2 << 30))
++    sizeReserv = historySize >> 2;
++  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++  if (LzInWindow_Create(p, sizeReserv, alloc))
++  {
++    UInt32 newCyclicBufferSize = historySize + 1;
++    UInt32 hs;
++    p->matchMaxLen = matchMaxLen;
++    {
++      p->fixedHashSize = 0;
++      if (p->numHashBytes == 2)
++        hs = (1 << 16) - 1;
++      else
++      {
++        hs = historySize - 1;
++        hs |= (hs >> 1);
++        hs |= (hs >> 2);
++        hs |= (hs >> 4);
++        hs |= (hs >> 8);
++        hs >>= 1;
++        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++        if (hs > (1 << 24))
++        {
++          if (p->numHashBytes == 3)
++            hs = (1 << 24) - 1;
++          else
++            hs >>= 1;
++        }
++      }
++      p->hashMask = hs;
++      hs++;
++      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++      hs += p->fixedHashSize;
++    }
++
++    {
++      UInt32 prevSize = p->hashSizeSum + p->numSons;
++      UInt32 newSize;
++      p->historySize = historySize;
++      p->hashSizeSum = hs;
++      p->cyclicBufferSize = newCyclicBufferSize;
++      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++      newSize = p->hashSizeSum + p->numSons;
++      if (p->hash != 0 && prevSize == newSize)
++        return 1;
++      MatchFinder_FreeThisClassMemory(p, alloc);
++      p->hash = AllocRefs(newSize, alloc);
++      if (p->hash != 0)
++      {
++        p->son = p->hash + p->hashSizeSum;
++        return 1;
++      }
++    }
++  }
++  MatchFinder_Free(p, alloc);
++  return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++  UInt32 limit = kMaxValForNormalize - p->pos;
++  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++  if (limit2 < limit)
++    limit = limit2;
++  limit2 = p->streamPos - p->pos;
++  if (limit2 <= p->keepSizeAfter)
++  {
++    if (limit2 > 0)
++      limit2 = 1;
++  }
++  else
++    limit2 -= p->keepSizeAfter;
++  if (limit2 < limit)
++    limit = limit2;
++  {
++    UInt32 lenLimit = p->streamPos - p->pos;
++    if (lenLimit > p->matchMaxLen)
++      lenLimit = p->matchMaxLen;
++    p->lenLimit = lenLimit;
++  }
++  p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++  UInt32 i;
++  for (i = 0; i < p->hashSizeSum; i++)
++    p->hash[i] = kEmptyHashValue;
++  p->cyclicBufferPos = 0;
++  p->buffer = p->bufferBase;
++  p->pos = p->streamPos = p->cyclicBufferSize;
++  p->result = SZ_OK;
++  p->streamEndWasReached = 0;
++  MatchFinder_ReadBlock(p);
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++  return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++  UInt32 i;
++  for (i = 0; i < numItems; i++)
++  {
++    UInt32 value = items[i];
++    if (value <= subValue)
++      value = kEmptyHashValue;
++    else
++      value -= subValue;
++    items[i] = value;
++  }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++  UInt32 subValue = MatchFinder_GetSubValue(p);
++  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++  MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++  if (p->pos == kMaxValForNormalize)
++    MatchFinder_Normalize(p);
++  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++    MatchFinder_CheckAndMoveAndRead(p);
++  if (p->cyclicBufferPos == p->cyclicBufferSize)
++    p->cyclicBufferPos = 0;
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  son[_cyclicBufferPos] = curMatch;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++      return distances;
++    {
++      const Byte *pb = cur - delta;
++      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++      {
++        UInt32 len = 0;
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++            return distances;
++        }
++      }
++    }
++  }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return distances;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        if (++len != lenLimit && pb[len] == cur[len])
++          while (++len != lenLimit)
++            if (pb[len] != cur[len])
++              break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return distances;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        {
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++#define MOVE_POS \
++  ++p->cyclicBufferPos; \
++  p->buffer++; \
++  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++  cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++  distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(2)
++  HASH2_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, delta2, maxLen, offset;
++  GET_MATCHES_HEADER(3)
++
++  HASH3_CALC;
++
++  delta2 = p->pos - p->hash[hash2Value];
++  curMatch = p->hash[kFix3HashSize + hashValue];
++  
++  p->hash[hash2Value] =
++  p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++  maxLen = 2;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[0] = maxLen;
++    distances[1] = delta2 - 1;
++    offset = 2;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++  
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      p->son[p->cyclicBufferPos] = curMatch;
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances + offset, maxLen) - (distances));
++  MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances, 2) - (distances));
++  MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(2)
++    HASH2_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value;
++    SKIP_HEADER(3)
++    HASH3_CALC;
++    curMatch = p->hash[kFix3HashSize + hashValue];
++    p->hash[hash2Value] =
++    p->hash[kFix3HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] = p->pos;
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] =
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++  if (!p->btMode)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 2)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 3)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++  }
++  else
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++  }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++  { UPDATE_0(p); i = (i + i); A0; } else \
++  { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++  { i = 1; \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++  { UPDATE_0_CHECK; i = (i + i); A0; } else \
++  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++  Result:
++    SZ_OK - OK
++    SZ_ERROR_DATA - Error
++  p->remainLen:
++    < kMatchSpecLenStart : normal remain
++    = kMatchSpecLenStart : finished
++    = kMatchSpecLenStart + 1 : Flush marker
++    = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  CLzmaProb *probs = p->probs;
++
++  unsigned state = p->state;
++  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++  unsigned lc = p->prop.lc;
++
++  Byte *dic = p->dic;
++  SizeT dicBufSize = p->dicBufSize;
++  SizeT dicPos = p->dicPos;
++  
++  UInt32 processedPos = p->processedPos;
++  UInt32 checkDicSize = p->checkDicSize;
++  unsigned len = 0;
++
++  const Byte *buf = p->buf;
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++
++  do
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = processedPos & pbMask;
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0(prob)
++    {
++      unsigned symbol;
++      UPDATE_0(prob);
++      prob = probs + Literal;
++      if (checkDicSize != 0 || processedPos != 0)
++        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++      if (state < kNumLitStates)
++      {
++        state -= (state < 4) ? state : 3;
++        symbol = 1;
++        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++        unsigned offs = 0x100;
++        state -= (state < 10) ? 3 : 6;
++        symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      dic[dicPos++] = (Byte)symbol;
++      processedPos++;
++      continue;
++    }
++    else
++    {
++      UPDATE_1(prob);
++      prob = probs + IsRep + state;
++      IF_BIT_0(prob)
++      {
++        UPDATE_0(prob);
++        state += kNumStates;
++        prob = probs + LenCoder;
++      }
++      else
++      {
++        UPDATE_1(prob);
++        if (checkDicSize == 0 && processedPos == 0)
++          return SZ_ERROR_DATA;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0(prob)
++        {
++          UPDATE_0(prob);
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++            dicPos++;
++            processedPos++;
++            state = state < kNumLitStates ? 9 : 11;
++            continue;
++          }
++          UPDATE_1(prob);
++        }
++        else
++        {
++          UInt32 distance;
++          UPDATE_1(prob);
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            distance = rep1;
++          }
++          else
++          {
++            UPDATE_1(prob);
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0(prob)
++            {
++              UPDATE_0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UPDATE_1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0(probLen)
++        {
++          UPDATE_0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = (1 << kLenNumLowBits);
++        }
++        else
++        {
++          UPDATE_1(probLen);
++          probLen = prob + LenChoice2;
++          IF_BIT_0(probLen)
++          {
++            UPDATE_0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = (1 << kLenNumMidBits);
++          }
++          else
++          {
++            UPDATE_1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = (1 << kLenNumHighBits);
++          }
++        }
++        TREE_DECODE(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state >= kNumStates)
++      {
++        UInt32 distance;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++        TREE_6_DECODE(prob, distance);
++        if (distance >= kStartPosModelIndex)
++        {
++          unsigned posSlot = (unsigned)distance;
++          int numDirectBits = (int)(((distance >> 1) - 1));
++          distance = (2 | (distance & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            distance <<= numDirectBits;
++            prob = probs + SpecPos + distance - posSlot - 1;
++            {
++              UInt32 mask = 1;
++              unsigned i = 1;
++              do
++              {
++                GET_BIT2(prob + i, i, ; , distance |= mask);
++                mask <<= 1;
++              }
++              while (--numDirectBits != 0);
++            }
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE
++              range >>= 1;
++              
++              {
++                UInt32 t;
++                code -= range;
++                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++                distance = (distance << 1) + (t + 1);
++                code += range & t;
++              }
++              /*
++              distance <<= 1;
++              if (code >= range)
++              {
++                code -= range;
++                distance |= 1;
++              }
++              */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            distance <<= kNumAlignBits;
++            {
++              unsigned i = 1;
++              GET_BIT2(prob + i, i, ; , distance |= 1);
++              GET_BIT2(prob + i, i, ; , distance |= 2);
++              GET_BIT2(prob + i, i, ; , distance |= 4);
++              GET_BIT2(prob + i, i, ; , distance |= 8);
++            }
++            if (distance == (UInt32)0xFFFFFFFF)
++            {
++              len += kMatchSpecLenStart;
++              state -= kNumStates;
++              break;
++            }
++          }
++        }
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        rep0 = distance + 1;
++        if (checkDicSize == 0)
++        {
++          if (distance >= processedPos)
++            return SZ_ERROR_DATA;
++        }
++        else if (distance >= checkDicSize)
++          return SZ_ERROR_DATA;
++        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++      }
++
++      len += kMatchMinLen;
++
++      if (limit == dicPos)
++        return SZ_ERROR_DATA;
++      {
++        SizeT rem = limit - dicPos;
++        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++        processedPos += curLen;
++
++        len -= curLen;
++        if (pos + curLen <= dicBufSize)
++        {
++          Byte *dest = dic + dicPos;
++          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++          const Byte *lim = dest + curLen;
++          dicPos += curLen;
++          do
++            *(dest) = (Byte)*(dest + src);
++          while (++dest != lim);
++        }
++        else
++        {
++          do
++          {
++            dic[dicPos++] = dic[pos];
++            if (++pos == dicBufSize)
++              pos = 0;
++          }
++          while (--curLen != 0);
++        }
++      }
++    }
++  }
++  while (dicPos < limit && buf < bufLimit);
++  NORMALIZE;
++  p->buf = buf;
++  p->range = range;
++  p->code = code;
++  p->remainLen = len;
++  p->dicPos = dicPos;
++  p->processedPos = processedPos;
++  p->reps[0] = rep0;
++  p->reps[1] = rep1;
++  p->reps[2] = rep2;
++  p->reps[3] = rep3;
++  p->state = state;
++
++  return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++  {
++    Byte *dic = p->dic;
++    SizeT dicPos = p->dicPos;
++    SizeT dicBufSize = p->dicBufSize;
++    unsigned len = p->remainLen;
++    UInt32 rep0 = p->reps[0];
++    if (limit - dicPos < len)
++      len = (unsigned)(limit - dicPos);
++
++    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++      p->checkDicSize = p->prop.dicSize;
++
++    p->processedPos += len;
++    p->remainLen -= len;
++    while (len-- != 0)
++    {
++      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++      dicPos++;
++    }
++    p->dicPos = dicPos;
++  }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  do
++  {
++    SizeT limit2 = limit;
++    if (p->checkDicSize == 0)
++    {
++      UInt32 rem = p->prop.dicSize - p->processedPos;
++      if (limit - p->dicPos > rem)
++        limit2 = p->dicPos + rem;
++    }
++    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++    if (p->processedPos >= p->prop.dicSize)
++      p->checkDicSize = p->prop.dicSize;
++    LzmaDec_WriteRem(p, limit);
++  }
++  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++  if (p->remainLen > kMatchSpecLenStart)
++  {
++    p->remainLen = kMatchSpecLenStart;
++  }
++  return 0;
++}
++
++typedef enum
++{
++  DUMMY_ERROR, /* unexpected end of input stream */
++  DUMMY_LIT,
++  DUMMY_MATCH,
++  DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++  const Byte *bufLimit = buf + inSize;
++  CLzmaProb *probs = p->probs;
++  unsigned state = p->state;
++  ELzmaDummy res;
++
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0_CHECK(prob)
++    {
++      UPDATE_0_CHECK
++
++      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++      prob = probs + Literal;
++      if (p->checkDicSize != 0 || p->processedPos != 0)
++        prob += (LZMA_LIT_SIZE *
++          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++      if (state < kNumLitStates)
++      {
++        unsigned symbol = 1;
++        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++        unsigned offs = 0x100;
++        unsigned symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      res = DUMMY_LIT;
++    }
++    else
++    {
++      unsigned len;
++      UPDATE_1_CHECK;
++
++      prob = probs + IsRep + state;
++      IF_BIT_0_CHECK(prob)
++      {
++        UPDATE_0_CHECK;
++        state = 0;
++        prob = probs + LenCoder;
++        res = DUMMY_MATCH;
++      }
++      else
++      {
++        UPDATE_1_CHECK;
++        res = DUMMY_REP;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0_CHECK(prob)
++        {
++          UPDATE_0_CHECK;
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++            NORMALIZE_CHECK;
++            return DUMMY_REP;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++          }
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0_CHECK(prob)
++            {
++              UPDATE_0_CHECK;
++            }
++            else
++            {
++              UPDATE_1_CHECK;
++            }
++          }
++        }
++        state = kNumStates;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0_CHECK(probLen)
++        {
++          UPDATE_0_CHECK;
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = 1 << kLenNumLowBits;
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          probLen = prob + LenChoice2;
++          IF_BIT_0_CHECK(probLen)
++          {
++            UPDATE_0_CHECK;
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = 1 << kLenNumMidBits;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = 1 << kLenNumHighBits;
++          }
++        }
++        TREE_DECODE_CHECK(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        unsigned posSlot;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits);
++        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++
++          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++          if (posSlot < kEndPosModelIndex)
++          {
++            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE_CHECK
++              range >>= 1;
++              code -= range & (((code - range) >> 31) - 1);
++              /* if (code >= range) code -= range; */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            unsigned i = 1;
++            do
++            {
++              GET_BIT_CHECK(prob + i, i);
++            }
++            while (--numDirectBits != 0);
++          }
++        }
++      }
++    }
++  }
++  NORMALIZE_CHECK;
++  return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->range = 0xFFFFFFFF;
++  p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++  p->needFlush = 1;
++  p->remainLen = 0;
++  p->tempBufSize = 0;
++
++  if (initDic)
++  {
++    p->processedPos = 0;
++    p->checkDicSize = 0;
++    p->needInitState = 1;
++  }
++  if (initState)
++    p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++  p->dicPos = 0;
++  LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++  UInt32 i;
++  CLzmaProb *probs = p->probs;
++  for (i = 0; i < numProbs; i++)
++    probs[i] = kBitModelTotal >> 1;
++  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++  p->state = 0;
++  p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++    ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT inSize = *srcLen;
++  (*srcLen) = 0;
++  LzmaDec_WriteRem(p, dicLimit);
++  
++  *status = LZMA_STATUS_NOT_SPECIFIED;
++
++  while (p->remainLen != kMatchSpecLenStart)
++  {
++      int checkEndMarkNow;
++
++      if (p->needFlush != 0)
++      {
++        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++          p->tempBuf[p->tempBufSize++] = *src++;
++        if (p->tempBufSize < RC_INIT_SIZE)
++        {
++          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++          return SZ_OK;
++        }
++        if (p->tempBuf[0] != 0)
++          return SZ_ERROR_DATA;
++
++        LzmaDec_InitRc(p, p->tempBuf);
++        p->tempBufSize = 0;
++      }
++
++      checkEndMarkNow = 0;
++      if (p->dicPos >= dicLimit)
++      {
++        if (p->remainLen == 0 && p->code == 0)
++        {
++          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++          return SZ_OK;
++        }
++        if (finishMode == LZMA_FINISH_ANY)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_OK;
++        }
++        if (p->remainLen != 0)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_ERROR_DATA;
++        }
++        checkEndMarkNow = 1;
++      }
++
++      if (p->needInitState)
++        LzmaDec_InitStateReal(p);
++  
++      if (p->tempBufSize == 0)
++      {
++        SizeT processed;
++        const Byte *bufLimit;
++        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            memcpy(p->tempBuf, src, inSize);
++            p->tempBufSize = (unsigned)inSize;
++            (*srcLen) += inSize;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++          bufLimit = src;
++        }
++        else
++          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++        p->buf = src;
++        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++          return SZ_ERROR_DATA;
++        processed = (SizeT)(p->buf - src);
++        (*srcLen) += processed;
++        src += processed;
++        inSize -= processed;
++      }
++      else
++      {
++        unsigned rem = p->tempBufSize, lookAhead = 0;
++        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++          p->tempBuf[rem++] = src[lookAhead++];
++        p->tempBufSize = rem;
++        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            (*srcLen) += lookAhead;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++        }
++        p->buf = p->tempBuf;
++        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++          return SZ_ERROR_DATA;
++        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++        (*srcLen) += lookAhead;
++        src += lookAhead;
++        inSize -= lookAhead;
++        p->tempBufSize = 0;
++      }
++  }
++  if (p->code == 0)
++    *status = LZMA_STATUS_FINISHED_WITH_MARK;
++  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT outSize = *destLen;
++  SizeT inSize = *srcLen;
++  *srcLen = *destLen = 0;
++  for (;;)
++  {
++    SizeT inSizeCur = inSize, outSizeCur, dicPos;
++    ELzmaFinishMode curFinishMode;
++    SRes res;
++    if (p->dicPos == p->dicBufSize)
++      p->dicPos = 0;
++    dicPos = p->dicPos;
++    if (outSize > p->dicBufSize - dicPos)
++    {
++      outSizeCur = p->dicBufSize;
++      curFinishMode = LZMA_FINISH_ANY;
++    }
++    else
++    {
++      outSizeCur = dicPos + outSize;
++      curFinishMode = finishMode;
++    }
++
++    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++    src += inSizeCur;
++    inSize -= inSizeCur;
++    *srcLen += inSizeCur;
++    outSizeCur = p->dicPos - dicPos;
++    memcpy(dest, p->dic + dicPos, outSizeCur);
++    dest += outSizeCur;
++    outSize -= outSizeCur;
++    *destLen += outSizeCur;
++    if (res != 0)
++      return res;
++    if (outSizeCur == 0 || outSize == 0)
++      return SZ_OK;
++  }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->probs);
++  p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->dic);
++  p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++  LzmaDec_FreeProbs(p, alloc);
++  LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++  UInt32 dicSize;
++  Byte d;
++  
++  if (size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_UNSUPPORTED;
++  else
++    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++ 
++  if (dicSize < LZMA_DIC_MIN)
++    dicSize = LZMA_DIC_MIN;
++  p->dicSize = dicSize;
++
++  d = data[0];
++  if (d >= (9 * 5 * 5))
++    return SZ_ERROR_UNSUPPORTED;
++
++  p->lc = d % 9;
++  d /= 9;
++  p->pb = d / 5;
++  p->lp = d % 5;
++
++  return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++  if (p->probs == 0 || numProbs != p->numProbs)
++  {
++    LzmaDec_FreeProbs(p, alloc);
++    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++    p->numProbs = numProbs;
++    if (p->probs == 0)
++      return SZ_ERROR_MEM;
++  }
++  return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  SizeT dicBufSize;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  dicBufSize = propNew.dicSize;
++  if (p->dic == 0 || dicBufSize != p->dicBufSize)
++  {
++    LzmaDec_FreeDict(p, alloc);
++    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++    if (p->dic == 0)
++    {
++      LzmaDec_FreeProbs(p, alloc);
++      return SZ_ERROR_MEM;
++    }
++  }
++  p->dicBufSize = dicBufSize;
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc)
++{
++  CLzmaDec p;
++  SRes res;
++  SizeT inSize = *srcLen;
++  SizeT outSize = *destLen;
++  *srcLen = *destLen = 0;
++  if (inSize < RC_INIT_SIZE)
++    return SZ_ERROR_INPUT_EOF;
++
++  LzmaDec_Construct(&p);
++  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++  if (res != 0)
++    return res;
++  p.dic = dest;
++  p.dicBufSize = outSize;
++
++  LzmaDec_Init(&p);
++  
++  *srcLen = inSize;
++  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++    res = SZ_ERROR_INPUT_EOF;
++
++  (*destLen) = p.dicPos;
++  LzmaDec_FreeProbs(&p, alloc);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++  p->level = 5;
++  p->dictSize = p->mc = 0;
++  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++  p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++  int level = p->level;
++  if (level < 0) level = 5;
++  p->level = level;
++  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++  if (p->lc < 0) p->lc = 3;
++  if (p->lp < 0) p->lp = 0;
++  if (p->pb < 0) p->pb = 2;
++  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++  if (p->numHashBytes < 0) p->numHashBytes = 4;
++  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++  if (p->numThreads < 0)
++    p->numThreads =
++      #ifndef _7ZIP_ST
++      ((p->btMode && p->algo) ? 2 : 1);
++      #else
++      1;
++      #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++  return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++  UInt32 res;
++  BSR2_RET(pos, res);
++  return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++  int c = 2, slotFast;
++  g_FastPos[0] = 0;
++  g_FastPos[1] = 1;
++  
++  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++  {
++    UInt32 k = (1 << ((slotFast >> 1) - 1));
++    UInt32 j;
++    for (j = 0; j < k; j++, c++)
++      g_FastPos[c] = (Byte)slotFast;
++  }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++  res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++  p->g_FastPos[pos >> 6] + 12 : \
++  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++  UInt32 price;
++
++  CState state;
++  int prev1IsChar;
++  int prev2;
++
++  UInt32 posPrev2;
++  UInt32 backPrev2;
++
++  UInt32 posPrev;
++  UInt32 backPrev;
++  UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++  CLzmaProb choice;
++  CLzmaProb choice2;
++  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++  CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++  CLenEnc p;
++  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++  UInt32 tableSize;
++  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++  UInt32 range;
++  Byte cache;
++  UInt64 low;
++  UInt64 cacheSize;
++  Byte *buf;
++  Byte *bufLim;
++  Byte *bufBase;
++  ISeqOutStream *outStream;
++  UInt64 processed;
++  SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++  IMatchFinder matchFinder;
++  void *matchFinderObj;
++
++  #ifndef _7ZIP_ST
++  Bool mtMode;
++  CMatchFinderMt matchFinderMt;
++  #endif
++
++  CMatchFinder matchFinderBase;
++
++  #ifndef _7ZIP_ST
++  Byte pad[128];
++  #endif
++  
++  UInt32 optimumEndIndex;
++  UInt32 optimumCurrentIndex;
++
++  UInt32 longestMatchLength;
++  UInt32 numPairs;
++  UInt32 numAvail;
++  COptimal opt[kNumOpts];
++  
++  #ifndef LZMA_LOG_BSR
++  Byte g_FastPos[1 << kNumLogBits];
++  #endif
++
++  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++  UInt32 numFastBytes;
++  UInt32 additionalOffset;
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++
++  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++  UInt32 alignPrices[kAlignTableSize];
++  UInt32 alignPriceCount;
++
++  UInt32 distTableSize;
++
++  unsigned lc, lp, pb;
++  unsigned lpMask, pbMask;
++
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  unsigned lclp;
++
++  Bool fastMode;
++  
++  CRangeEnc rc;
++
++  Bool writeEndMark;
++  UInt64 nowPos64;
++  UInt32 matchPriceCount;
++  Bool finished;
++  Bool multiThread;
++
++  SRes result;
++  UInt32 dictSize;
++  UInt32 matchFinderCycles;
++
++  int needInit;
++
++  CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CSaveState *dest = &p->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *dest = (CLzmaEnc *)pp;
++  const CSaveState *p = &dest->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++
++  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++    return SZ_ERROR_PARAM;
++  p->dictSize = props.dictSize;
++  p->matchFinderCycles = props.mc;
++  {
++    unsigned fb = props.fb;
++    if (fb < 5)
++      fb = 5;
++    if (fb > LZMA_MATCH_LEN_MAX)
++      fb = LZMA_MATCH_LEN_MAX;
++    p->numFastBytes = fb;
++  }
++  p->lc = props.lc;
++  p->lp = props.lp;
++  p->pb = props.pb;
++  p->fastMode = (props.algo == 0);
++  p->matchFinderBase.btMode = props.btMode;
++  {
++    UInt32 numHashBytes = 4;
++    if (props.btMode)
++    {
++      if (props.numHashBytes < 2)
++        numHashBytes = 2;
++      else if (props.numHashBytes < 4)
++        numHashBytes = props.numHashBytes;
++    }
++    p->matchFinderBase.numHashBytes = numHashBytes;
++  }
++
++  p->matchFinderBase.cutValue = props.mc;
++
++  p->writeEndMark = props.writeEndMark;
++
++  #ifndef _7ZIP_ST
++  /*
++  if (newMultiThread != _multiThread)
++  {
++    ReleaseMatchFinder();
++    _multiThread = newMultiThread;
++  }
++  */
++  p->multiThread = (props.numThreads > 1);
++  #endif
++
++  return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
++static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++  p->outStream = 0;
++  p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++  if (p->bufBase == 0)
++  {
++    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++    if (p->bufBase == 0)
++      return 0;
++    p->bufLim = p->bufBase + RC_BUF_SIZE;
++  }
++  return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->bufBase);
++  p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++  /* Stream.Init(); */
++  p->low = 0;
++  p->range = 0xFFFFFFFF;
++  p->cacheSize = 1;
++  p->cache = 0;
++
++  p->buf = p->bufBase;
++
++  p->processed = 0;
++  p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++  size_t num;
++  if (p->res != SZ_OK)
++    return;
++  num = p->buf - p->bufBase;
++  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++    p->res = SZ_ERROR_WRITE;
++  p->processed += num;
++  p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++  {
++    Byte temp = p->cache;
++    do
++    {
++      Byte *buf = p->buf;
++      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++      p->buf = buf;
++      if (buf == p->bufLim)
++        RangeEnc_FlushStream(p);
++      temp = 0xFF;
++    }
++    while (--p->cacheSize != 0);
++    p->cache = (Byte)((UInt32)p->low >> 24);
++  }
++  p->cacheSize++;
++  p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++  int i;
++  for (i = 0; i < 5; i++)
++    RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++  do
++  {
++    p->range >>= 1;
++    p->low += p->range & (0 - ((value >> --numBits) & 1));
++    if (p->range < kTopValue)
++    {
++      p->range <<= 8;
++      RangeEnc_ShiftLow(p);
++    }
++  }
++  while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++  UInt32 ttt = *prob;
++  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++  if (symbol == 0)
++  {
++    p->range = newBound;
++    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++  }
++  else
++  {
++    p->low += newBound;
++    p->range -= newBound;
++    ttt -= ttt >> kNumMoveBits;
++  }
++  *prob = (CLzmaProb)ttt;
++  if (p->range < kTopValue)
++  {
++    p->range <<= 8;
++    RangeEnc_ShiftLow(p);
++  }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++  symbol |= 0x100;
++  do
++  {
++    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++  UInt32 i;
++  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++  {
++    const int kCyclesBits = kNumBitPriceShiftBits;
++    UInt32 w = i;
++    UInt32 bitCount = 0;
++    int j;
++    for (j = 0; j < kCyclesBits; j++)
++    {
++      w = w * w;
++      bitCount <<= 1;
++      while (w >= ((UInt32)1 << 16))
++      {
++        w >>= 1;
++        bitCount++;
++      }
++    }
++    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++  }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= 0x100;
++  do
++  {
++    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0;)
++  {
++    UInt32 bit;
++    i--;
++    bit = (symbol >> i) & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++  }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = 0; i < numBitLevels; i++)
++  {
++    UInt32 bit = symbol & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++    symbol >>= 1;
++  }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= (1 << numBitLevels);
++  while (symbol != 1)
++  {
++    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++    symbol >>= 1;
++  }
++  return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0; i--)
++  {
++    UInt32 bit = symbol & 1;
++    symbol >>= 1;
++    price += GET_PRICEa(probs[m], bit);
++    m = (m << 1) | bit;
++  }
++  return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++  unsigned i;
++  p->choice = p->choice2 = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++    p->low[i] = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++    p->mid[i] = kProbInitValue;
++  for (i = 0; i < kLenNumHighSymbols; i++)
++    p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++  if (symbol < kLenNumLowSymbols)
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 0);
++    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++  }
++  else
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 1);
++    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 0);
++      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++    }
++    else
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 1);
++      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++    }
++  }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++  UInt32 a0 = GET_PRICE_0a(p->choice);
++  UInt32 a1 = GET_PRICE_1a(p->choice);
++  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++  UInt32 i = 0;
++  for (i = 0; i < kLenNumLowSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++  }
++  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++  }
++  for (; i < numSymbols; i++)
++    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++  p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++  UInt32 posState;
++  for (posState = 0; posState < numPosStates; posState++)
++    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++  LenEnc_Encode(&p->p, rc, symbol, posState);
++  if (updatePrice)
++    if (--p->counters[posState] == 0)
++      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++  #ifdef SHOW_STAT
++  ttt += num;
++  printf("\n MovePos %d", num);
++  #endif
++  if (num != 0)
++  {
++    p->additionalOffset += num;
++    p->matchFinder.Skip(p->matchFinderObj, num);
++  }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++  UInt32 lenRes = 0, numPairs;
++  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++  #ifdef SHOW_STAT
++  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
++  ttt++;
++  {
++    UInt32 i;
++    for (i = 0; i < numPairs; i += 2)
++      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
++  }
++  #endif
++  if (numPairs > 0)
++  {
++    lenRes = p->matches[numPairs - 2];
++    if (lenRes == p->numFastBytes)
++    {
++      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++      UInt32 distance = p->matches[numPairs - 1] + 1;
++      UInt32 numAvail = p->numAvail;
++      if (numAvail > LZMA_MATCH_LEN_MAX)
++        numAvail = LZMA_MATCH_LEN_MAX;
++      {
++        const Byte *pby2 = pby - distance;
++        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++      }
++    }
++  }
++  p->additionalOffset++;
++  *numDistancePairsRes = numPairs;
++  return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++  return
++    GET_PRICE_0(p->isRepG0[state]) +
++    GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++  UInt32 price;
++  if (repIndex == 0)
++  {
++    price = GET_PRICE_0(p->isRepG0[state]);
++    price += GET_PRICE_1(p->isRep0Long[state][posState]);
++  }
++  else
++  {
++    price = GET_PRICE_1(p->isRepG0[state]);
++    if (repIndex == 1)
++      price += GET_PRICE_0(p->isRepG1[state]);
++    else
++    {
++      price += GET_PRICE_1(p->isRepG1[state]);
++      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++    }
++  }
++  return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++    GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++  UInt32 posMem = p->opt[cur].posPrev;
++  UInt32 backMem = p->opt[cur].backPrev;
++  p->optimumEndIndex = cur;
++  do
++  {
++    if (p->opt[cur].prev1IsChar)
++    {
++      MakeAsChar(&p->opt[posMem])
++      p->opt[posMem].posPrev = posMem - 1;
++      if (p->opt[cur].prev2)
++      {
++        p->opt[posMem - 1].prev1IsChar = False;
++        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++      }
++    }
++    {
++      UInt32 posPrev = posMem;
++      UInt32 backCur = backMem;
++      
++      backMem = p->opt[posPrev].backPrev;
++      posMem = p->opt[posPrev].posPrev;
++      
++      p->opt[posPrev].backPrev = backCur;
++      p->opt[posPrev].posPrev = cur;
++      cur = posPrev;
++    }
++  }
++  while (cur != 0);
++  *backRes = p->opt[0].backPrev;
++  p->optimumCurrentIndex  = p->opt[0].posPrev;
++  return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++  UInt32 *matches;
++  const Byte *data;
++  Byte curByte, matchByte;
++  if (p->optimumEndIndex != p->optimumCurrentIndex)
++  {
++    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++    *backRes = opt->backPrev;
++    p->optimumCurrentIndex = opt->posPrev;
++    return lenRes;
++  }
++  p->optimumCurrentIndex = p->optimumEndIndex = 0;
++  
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  if (numAvail < 2)
++  {
++    *backRes = (UInt32)(-1);
++    return 1;
++  }
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  repMaxIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 lenTest;
++    const Byte *data2;
++    reps[i] = p->reps[i];
++    data2 = data - (reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++    {
++      repLens[i] = 0;
++      continue;
++    }
++    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++    repLens[i] = lenTest;
++    if (lenTest > repLens[repMaxIndex])
++      repMaxIndex = i;
++  }
++  if (repLens[repMaxIndex] >= p->numFastBytes)
++  {
++    UInt32 lenRes;
++    *backRes = repMaxIndex;
++    lenRes = repLens[repMaxIndex];
++    MovePos(p, lenRes - 1);
++    return lenRes;
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++  curByte = *data;
++  matchByte = *(data - (reps[0] + 1));
++
++  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++  {
++    *backRes = (UInt32)-1;
++    return 1;
++  }
++
++  p->opt[0].state = (CState)p->state;
++
++  posState = (position & p->pbMask);
++
++  {
++    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++        (!IsCharState(p->state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++  }
++
++  MakeAsChar(&p->opt[1]);
++
++  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++  if (matchByte == curByte)
++  {
++    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++    if (shortRepPrice < p->opt[1].price)
++    {
++      p->opt[1].price = shortRepPrice;
++      MakeAsShortRep(&p->opt[1]);
++    }
++  }
++  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++  if (lenEnd < 2)
++  {
++    *backRes = p->opt[1].backPrev;
++    return 1;
++  }
++
++  p->opt[1].posPrev = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++    p->opt[0].backs[i] = reps[i];
++
++  len = lenEnd;
++  do
++    p->opt[len--].price = kInfinityPrice;
++  while (len >= 2);
++
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 repLen = repLens[i];
++    UInt32 price;
++    if (repLen < 2)
++      continue;
++    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++    do
++    {
++      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++      COptimal *opt = &p->opt[repLen];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = i;
++        opt->prev1IsChar = False;
++      }
++    }
++    while (--repLen >= 2);
++  }
++
++  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++  if (len <= mainLen)
++  {
++    UInt32 offs = 0;
++    while (len > matches[offs])
++      offs += 2;
++    for (; ; len++)
++    {
++      COptimal *opt;
++      UInt32 distance = matches[offs + 1];
++
++      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++      UInt32 lenToPosState = GetLenToPosState(len);
++      if (distance < kNumFullDistances)
++        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++      else
++      {
++        UInt32 slot;
++        GetPosSlot2(distance, slot);
++        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++      }
++      opt = &p->opt[len];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = distance + LZMA_NUM_REPS;
++        opt->prev1IsChar = False;
++      }
++      if (len == matches[offs])
++      {
++        offs += 2;
++        if (offs == numPairs)
++          break;
++      }
++    }
++  }
++
++  cur = 0;
++
++    #ifdef SHOW_STAT2
++    if (position >= 0)
++    {
++      unsigned i;
++      printf("\n pos = %4X", position);
++      for (i = cur; i <= lenEnd; i++)
++      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++    }
++    #endif
++
++  for (;;)
++  {
++    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++    Bool nextIsChar;
++    Byte curByte, matchByte;
++    const Byte *data;
++    COptimal *curOpt;
++    COptimal *nextOpt;
++
++    cur++;
++    if (cur == lenEnd)
++      return Backward(p, backRes, cur);
++
++    newLen = ReadMatchDistances(p, &numPairs);
++    if (newLen >= p->numFastBytes)
++    {
++      p->numPairs = numPairs;
++      p->longestMatchLength = newLen;
++      return Backward(p, backRes, cur);
++    }
++    position++;
++    curOpt = &p->opt[cur];
++    posPrev = curOpt->posPrev;
++    if (curOpt->prev1IsChar)
++    {
++      posPrev--;
++      if (curOpt->prev2)
++      {
++        state = p->opt[curOpt->posPrev2].state;
++        if (curOpt->backPrev2 < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      else
++        state = p->opt[posPrev].state;
++      state = kLiteralNextStates[state];
++    }
++    else
++      state = p->opt[posPrev].state;
++    if (posPrev == cur - 1)
++    {
++      if (IsShortRep(curOpt))
++        state = kShortRepNextStates[state];
++      else
++        state = kLiteralNextStates[state];
++    }
++    else
++    {
++      UInt32 pos;
++      const COptimal *prevOpt;
++      if (curOpt->prev1IsChar && curOpt->prev2)
++      {
++        posPrev = curOpt->posPrev2;
++        pos = curOpt->backPrev2;
++        state = kRepNextStates[state];
++      }
++      else
++      {
++        pos = curOpt->backPrev;
++        if (pos < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      prevOpt = &p->opt[posPrev];
++      if (pos < LZMA_NUM_REPS)
++      {
++        UInt32 i;
++        reps[0] = prevOpt->backs[pos];
++        for (i = 1; i <= pos; i++)
++          reps[i] = prevOpt->backs[i - 1];
++        for (; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i];
++      }
++      else
++      {
++        UInt32 i;
++        reps[0] = (pos - LZMA_NUM_REPS);
++        for (i = 1; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i - 1];
++      }
++    }
++    curOpt->state = (CState)state;
++
++    curOpt->backs[0] = reps[0];
++    curOpt->backs[1] = reps[1];
++    curOpt->backs[2] = reps[2];
++    curOpt->backs[3] = reps[3];
++
++    curPrice = curOpt->price;
++    nextIsChar = False;
++    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++    curByte = *data;
++    matchByte = *(data - (reps[0] + 1));
++
++    posState = (position & p->pbMask);
++
++    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++    {
++      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++      curAnd1Price +=
++        (!IsCharState(state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++    }
++
++    nextOpt = &p->opt[cur + 1];
++
++    if (curAnd1Price < nextOpt->price)
++    {
++      nextOpt->price = curAnd1Price;
++      nextOpt->posPrev = cur;
++      MakeAsChar(nextOpt);
++      nextIsChar = True;
++    }
++
++    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++    
++    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++    {
++      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++      if (shortRepPrice <= nextOpt->price)
++      {
++        nextOpt->price = shortRepPrice;
++        nextOpt->posPrev = cur;
++        MakeAsShortRep(nextOpt);
++        nextIsChar = True;
++      }
++    }
++    numAvailFull = p->numAvail;
++    {
++      UInt32 temp = kNumOpts - 1 - cur;
++      if (temp < numAvailFull)
++        numAvailFull = temp;
++    }
++
++    if (numAvailFull < 2)
++      continue;
++    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++    if (!nextIsChar && matchByte != curByte) /* speed optimization */
++    {
++      /* try Literal + rep0 */
++      UInt32 temp;
++      UInt32 lenTest2;
++      const Byte *data2 = data - (reps[0] + 1);
++      UInt32 limit = p->numFastBytes + 1;
++      if (limit > numAvailFull)
++        limit = numAvailFull;
++
++      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++      lenTest2 = temp - 1;
++      if (lenTest2 >= 2)
++      {
++        UInt32 state2 = kLiteralNextStates[state];
++        UInt32 posStateNext = (position + 1) & p->pbMask;
++        UInt32 nextRepMatchPrice = curAnd1Price +
++            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++            GET_PRICE_1(p->isRep[state2]);
++        /* for (; lenTest2 >= 2; lenTest2--) */
++        {
++          UInt32 curAndLenPrice;
++          COptimal *opt;
++          UInt32 offset = cur + 1 + lenTest2;
++          while (lenEnd < offset)
++            p->opt[++lenEnd].price = kInfinityPrice;
++          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++          opt = &p->opt[offset];
++          if (curAndLenPrice < opt->price)
++          {
++            opt->price = curAndLenPrice;
++            opt->posPrev = cur + 1;
++            opt->backPrev = 0;
++            opt->prev1IsChar = True;
++            opt->prev2 = False;
++          }
++        }
++      }
++    }
++    
++    startLen = 2; /* speed optimization */
++    {
++    UInt32 repIndex;
++    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++    {
++      UInt32 lenTest;
++      UInt32 lenTestTemp;
++      UInt32 price;
++      const Byte *data2 = data - (reps[repIndex] + 1);
++      if (data[0] != data2[0] || data[1] != data2[1])
++        continue;
++      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++      while (lenEnd < cur + lenTest)
++        p->opt[++lenEnd].price = kInfinityPrice;
++      lenTestTemp = lenTest;
++      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++      do
++      {
++        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++        COptimal *opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = repIndex;
++          opt->prev1IsChar = False;
++        }
++      }
++      while (--lenTest >= 2);
++      lenTest = lenTestTemp;
++      
++      if (repIndex == 0)
++        startLen = lenTest + 1;
++        
++      /* if (_maxMode) */
++        {
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kRepNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice =
++                price + p->repLenEnc.prices[posState][lenTest - 2] +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (position + lenTest + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = repIndex;
++              }
++            }
++          }
++        }
++    }
++    }
++    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++    if (newLen > numAvail)
++    {
++      newLen = numAvail;
++      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++      matches[numPairs] = newLen;
++      numPairs += 2;
++    }
++    if (newLen >= startLen)
++    {
++      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++      UInt32 offs, curBack, posSlot;
++      UInt32 lenTest;
++      while (lenEnd < cur + newLen)
++        p->opt[++lenEnd].price = kInfinityPrice;
++
++      offs = 0;
++      while (startLen > matches[offs])
++        offs += 2;
++      curBack = matches[offs + 1];
++      GetPosSlot2(curBack, posSlot);
++      for (lenTest = /*2*/ startLen; ; lenTest++)
++      {
++        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++        UInt32 lenToPosState = GetLenToPosState(lenTest);
++        COptimal *opt;
++        if (curBack < kNumFullDistances)
++          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++        else
++          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++        
++        opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = curBack + LZMA_NUM_REPS;
++          opt->prev1IsChar = False;
++        }
++
++        if (/*_maxMode && */lenTest == matches[offs])
++        {
++          /* Try Match + Literal + Rep0 */
++          const Byte *data2 = data - (curBack + 1);
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kMatchNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice = curAndLenPrice +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (posStateNext + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = curBack + LZMA_NUM_REPS;
++              }
++            }
++          }
++          offs += 2;
++          if (offs == numPairs)
++            break;
++          curBack = matches[offs + 1];
++          if (curBack >= kNumFullDistances)
++            GetPosSlot2(curBack, posSlot);
++        }
++      }
++    }
++  }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++  const Byte *data;
++  const UInt32 *matches;
++
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  *backRes = (UInt32)-1;
++  if (numAvail < 2)
++    return 1;
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++  repLen = repIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++    if (len >= p->numFastBytes)
++    {
++      *backRes = i;
++      MovePos(p, len - 1);
++      return len;
++    }
++    if (len > repLen)
++    {
++      repIndex = i;
++      repLen = len;
++    }
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++
++  mainDist = 0; /* for GCC */
++  if (mainLen >= 2)
++  {
++    mainDist = matches[numPairs - 1];
++    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++    {
++      if (!ChangePair(matches[numPairs - 3], mainDist))
++        break;
++      numPairs -= 2;
++      mainLen = matches[numPairs - 2];
++      mainDist = matches[numPairs - 1];
++    }
++    if (mainLen == 2 && mainDist >= 0x80)
++      mainLen = 1;
++  }
++
++  if (repLen >= 2 && (
++        (repLen + 1 >= mainLen) ||
++        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++  {
++    *backRes = repIndex;
++    MovePos(p, repLen - 1);
++    return repLen;
++  }
++  
++  if (mainLen < 2 || numAvail <= 2)
++    return 1;
++
++  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++  if (p->longestMatchLength >= 2)
++  {
++    UInt32 newDistance = matches[p->numPairs - 1];
++    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++        (p->longestMatchLength > mainLen + 1) ||
++        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++      return 1;
++  }
++  
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len, limit;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    limit = mainLen - 1;
++    for (len = 2; len < limit && data[len] == data2[len]; len++);
++    if (len >= limit)
++      return 1;
++  }
++  *backRes = mainDist + LZMA_NUM_REPS;
++  MovePos(p, mainLen - 2);
++  return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++  UInt32 len;
++  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++  p->state = kMatchNextStates[p->state];
++  len = LZMA_MATCH_LEN_MIN;
++  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++  if (p->result != SZ_OK)
++    return p->result;
++  if (p->rc.res != SZ_OK)
++    p->result = SZ_ERROR_WRITE;
++  if (p->matchFinderBase.result != SZ_OK)
++    p->result = SZ_ERROR_READ;
++  if (p->result != SZ_OK)
++    p->finished = True;
++  return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++  /* ReleaseMFStream(); */
++  p->finished = True;
++  if (p->writeEndMark)
++    WriteEndMarker(p, nowPos & p->pbMask);
++  RangeEnc_FlushData(&p->rc);
++  RangeEnc_FlushStream(&p->rc);
++  return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++  UInt32 i;
++  for (i = 0; i < kAlignTableSize; i++)
++    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++  p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++  UInt32 tempPrices[kNumFullDistances];
++  UInt32 i, lenToPosState;
++  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++  {
++    UInt32 posSlot = GetPosSlot1(i);
++    UInt32 footerBits = ((posSlot >> 1) - 1);
++    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++  }
++
++  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++  {
++    UInt32 posSlot;
++    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++    {
++      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++      UInt32 i;
++      for (i = 0; i < kStartPosModelIndex; i++)
++        distancesPrices[i] = posSlotPrices[i];
++      for (; i < kNumFullDistances; i++)
++        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++    }
++  }
++  p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++  RangeEnc_Construct(&p->rc);
++  MatchFinder_Construct(&p->matchFinderBase);
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Construct(&p->matchFinderMt);
++  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++  #endif
++
++  {
++    CLzmaEncProps props;
++    LzmaEncProps_Init(&props);
++    LzmaEnc_SetProps(p, &props);
++  }
++
++  #ifndef LZMA_LOG_BSR
++  LzmaEnc_FastPosInit(p->g_FastPos);
++  #endif
++
++  LzmaEnc_InitPriceTables(p->ProbPrices);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++  void *p;
++  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++  if (p != 0)
++    LzmaEnc_Construct((CLzmaEnc *)p);
++  return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->litProbs);
++  alloc->Free(alloc, p->saveState.litProbs);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++  #endif
++  MatchFinder_Free(&p->matchFinderBase, allocBig);
++  LzmaEnc_FreeLits(p, alloc);
++  RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++  alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++  UInt32 nowPos32, startPos32;
++  if (p->needInit)
++  {
++    p->matchFinder.Init(p->matchFinderObj);
++    p->needInit = 0;
++  }
++
++  if (p->finished)
++    return p->result;
++  RINOK(CheckErrors(p));
++
++  nowPos32 = (UInt32)p->nowPos64;
++  startPos32 = nowPos32;
++
++  if (p->nowPos64 == 0)
++  {
++    UInt32 numPairs;
++    Byte curByte;
++    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++      return Flush(p, nowPos32);
++    ReadMatchDistances(p, &numPairs);
++    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++    p->state = kLiteralNextStates[p->state];
++    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++    LitEnc_Encode(&p->rc, p->litProbs, curByte);
++    p->additionalOffset--;
++    nowPos32++;
++  }
++
++  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++  for (;;)
++  {
++    UInt32 pos, len, posState;
++
++    if (p->fastMode)
++      len = GetOptimumFast(p, &pos);
++    else
++      len = GetOptimum(p, nowPos32, &pos);
++
++    #ifdef SHOW_STAT2
++    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
++    #endif
++
++    posState = nowPos32 & p->pbMask;
++    if (len == 1 && pos == (UInt32)-1)
++    {
++      Byte curByte;
++      CLzmaProb *probs;
++      const Byte *data;
++
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++      curByte = *data;
++      probs = LIT_PROBS(nowPos32, *(data - 1));
++      if (IsCharState(p->state))
++        LitEnc_Encode(&p->rc, probs, curByte);
++      else
++        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++      p->state = kLiteralNextStates[p->state];
++    }
++    else
++    {
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++      if (pos < LZMA_NUM_REPS)
++      {
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++        if (pos == 0)
++        {
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++        }
++        else
++        {
++          UInt32 distance = p->reps[pos];
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++          if (pos == 1)
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++          else
++          {
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++            if (pos == 3)
++              p->reps[3] = p->reps[2];
++            p->reps[2] = p->reps[1];
++          }
++          p->reps[1] = p->reps[0];
++          p->reps[0] = distance;
++        }
++        if (len == 1)
++          p->state = kShortRepNextStates[p->state];
++        else
++        {
++          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++          p->state = kRepNextStates[p->state];
++        }
++      }
++      else
++      {
++        UInt32 posSlot;
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++        p->state = kMatchNextStates[p->state];
++        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++        pos -= LZMA_NUM_REPS;
++        GetPosSlot(pos, posSlot);
++        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++        
++        if (posSlot >= kStartPosModelIndex)
++        {
++          UInt32 footerBits = ((posSlot >> 1) - 1);
++          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++          UInt32 posReduced = pos - base;
++
++          if (posSlot < kEndPosModelIndex)
++            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++          else
++          {
++            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++            p->alignPriceCount++;
++          }
++        }
++        p->reps[3] = p->reps[2];
++        p->reps[2] = p->reps[1];
++        p->reps[1] = p->reps[0];
++        p->reps[0] = pos;
++        p->matchPriceCount++;
++      }
++    }
++    p->additionalOffset -= len;
++    nowPos32 += len;
++    if (p->additionalOffset == 0)
++    {
++      UInt32 processed;
++      if (!p->fastMode)
++      {
++        if (p->matchPriceCount >= (1 << 7))
++          FillDistancesPrices(p);
++        if (p->alignPriceCount >= kAlignTableSize)
++          FillAlignPrices(p);
++      }
++      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++        break;
++      processed = nowPos32 - startPos32;
++      if (useLimits)
++      {
++        if (processed + kNumOpts + 300 >= maxUnpackSize ||
++            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++          break;
++      }
++      else if (processed >= (1 << 15))
++      {
++        p->nowPos64 += nowPos32 - startPos32;
++        return CheckErrors(p);
++      }
++    }
++  }
++  p->nowPos64 += nowPos32 - startPos32;
++  return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 beforeSize = kNumOpts;
++  Bool btMode;
++  if (!RangeEnc_Alloc(&p->rc, alloc))
++    return SZ_ERROR_MEM;
++  btMode = (p->matchFinderBase.btMode != 0);
++  #ifndef _7ZIP_ST
++  p->mtMode = (p->multiThread && !p->fastMode && btMode);
++  #endif
++
++  {
++    unsigned lclp = p->lc + p->lp;
++    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++    {
++      LzmaEnc_FreeLits(p, alloc);
++      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      if (p->litProbs == 0 || p->saveState.litProbs == 0)
++      {
++        LzmaEnc_FreeLits(p, alloc);
++        return SZ_ERROR_MEM;
++      }
++      p->lclp = lclp;
++    }
++  }
++
++  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++  if (beforeSize + p->dictSize < keepWindowSize)
++    beforeSize = keepWindowSize - p->dictSize;
++
++  #ifndef _7ZIP_ST
++  if (p->mtMode)
++  {
++    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++    p->matchFinderObj = &p->matchFinderMt;
++    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++  }
++  else
++  #endif
++  {
++    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++      return SZ_ERROR_MEM;
++    p->matchFinderObj = &p->matchFinderBase;
++    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++  }
++  return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++  UInt32 i;
++  p->state = 0;
++  for (i = 0 ; i < LZMA_NUM_REPS; i++)
++    p->reps[i] = 0;
++
++  RangeEnc_Init(&p->rc);
++
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    UInt32 j;
++    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++    {
++      p->isMatch[i][j] = kProbInitValue;
++      p->isRep0Long[i][j] = kProbInitValue;
++    }
++    p->isRep[i] = kProbInitValue;
++    p->isRepG0[i] = kProbInitValue;
++    p->isRepG1[i] = kProbInitValue;
++    p->isRepG2[i] = kProbInitValue;
++  }
++
++  {
++    UInt32 num = 0x300 << (p->lp + p->lc);
++    for (i = 0; i < num; i++)
++      p->litProbs[i] = kProbInitValue;
++  }
++
++  {
++    for (i = 0; i < kNumLenToPosStates; i++)
++    {
++      CLzmaProb *probs = p->posSlotEncoder[i];
++      UInt32 j;
++      for (j = 0; j < (1 << kNumPosSlotBits); j++)
++        probs[j] = kProbInitValue;
++    }
++  }
++  {
++    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++      p->posEncoders[i] = kProbInitValue;
++  }
++
++  LenEnc_Init(&p->lenEnc.p);
++  LenEnc_Init(&p->repLenEnc.p);
++
++  for (i = 0; i < (1 << kNumAlignBits); i++)
++    p->posAlignEncoder[i] = kProbInitValue;
++
++  p->optimumEndIndex = 0;
++  p->optimumCurrentIndex = 0;
++  p->additionalOffset = 0;
++
++  p->pbMask = (1 << p->pb) - 1;
++  p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++  if (!p->fastMode)
++  {
++    FillDistancesPrices(p);
++    FillAlignPrices(p);
++  }
++
++  p->lenEnc.tableSize =
++  p->repLenEnc.tableSize =
++      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 i;
++  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++    if (p->dictSize <= ((UInt32)1 << i))
++      break;
++  p->distTableSize = i * 2;
++
++  p->finished = False;
++  p->result = SZ_OK;
++  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++  LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  p->nowPos64 = 0;
++  return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  p->rc.outStream = outStream;
++  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++    ISeqInStream *inStream, UInt32 keepWindowSize,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++  p->matchFinderBase.directInput = 1;
++  p->matchFinderBase.bufferBase = (Byte *)src;
++  p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++  p->needInit = 1;
++
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++  #ifndef _7ZIP_ST
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  if (p->mtMode)
++    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++  #else
++  pp = pp;
++  #endif
++}
++
++typedef struct
++{
++  ISeqOutStream funcTable;
++  Byte *data;
++  SizeT rem;
++  Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++  if (p->rem < size)
++  {
++    size = p->rem;
++    p->overflow = True;
++  }
++  memcpy(p->data, data, size);
++  p->rem -= size;
++  p->data += size;
++  return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  UInt64 nowPos64;
++  SRes res;
++  CSeqOutStreamBuf outStream;
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = False;
++  p->finished = False;
++  p->result = SZ_OK;
++
++  if (reInit)
++    LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  nowPos64 = p->nowPos64;
++  RangeEnc_Init(&p->rc);
++  p->rc.outStream = &outStream.funcTable;
++
++  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++  
++  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++
++  return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++  SRes res = SZ_OK;
++
++  #ifndef _7ZIP_ST
++  Byte allocaDummy[0x300];
++  int i = 0;
++  for (i = 0; i < 16; i++)
++    allocaDummy[i] = (Byte)i;
++  #endif
++
++  for (;;)
++  {
++    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++    if (res != SZ_OK || p->finished != 0)
++      break;
++    if (progress != 0)
++    {
++      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++      if (res != SZ_OK)
++      {
++        res = SZ_ERROR_PROGRESS;
++        break;
++      }
++    }
++  }
++  LzmaEnc_Finish(p);
++  return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  int i;
++  UInt32 dictSize = p->dictSize;
++  if (*size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_PARAM;
++  *size = LZMA_PROPS_SIZE;
++  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++  for (i = 11; i <= 30; i++)
++  {
++    if (dictSize <= ((UInt32)2 << i))
++    {
++      dictSize = (2 << i);
++      break;
++    }
++    if (dictSize <= ((UInt32)3 << i))
++    {
++      dictSize = (3 << i);
++      break;
++    }
++  }
++
++  for (i = 0; i < 4; i++)
++    props[1 + i] = (Byte)(dictSize >> (8 * i));
++  return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  SRes res;
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++
++  CSeqOutStreamBuf outStream;
++
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = writeEndMark;
++
++  p->rc.outStream = &outStream.funcTable;
++  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++  if (res == SZ_OK)
++    res = LzmaEnc_Encode2(p, progress);
++
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++  return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++  SRes res;
++  if (p == 0)
++    return SZ_ERROR_MEM;
++
++  res = LzmaEnc_SetProps(p, props);
++  if (res == SZ_OK)
++  {
++    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++    if (res == SZ_OK)
++      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++          writeEndMark, progress, alloc, allocBig);
++  }
++
++  LzmaEnc_Destroy(p, alloc, allocBig);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-4.14/532-jffs2_eofdetect.patch b/target/linux/generic/pending-4.14/532-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..e9952c6d84
--- /dev/null
+++ b/target/linux/generic/pending-4.14/532-jffs2_eofdetect.patch
@@ -0,0 +1,65 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: fs: jffs2: EOF marker
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ fs/jffs2/build.c | 10 ++++++++++
+ fs/jffs2/scan.c  | 21 +++++++++++++++++++--
+ 2 files changed, 29 insertions(+), 2 deletions(-)
+
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		mtd_unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7)) {
++			if (mtd_block_isbad(c->mtd, jeb->offset))
++				ret = BLK_STATE_BADBLOCK;
++			else
++				ret = BLK_STATE_ALLFF;
++		} else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -561,6 +567,17 @@ full_scan:
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-4.14/551-ubifs-fix-default-compression-selection.patch b/target/linux/generic/pending-4.14/551-ubifs-fix-default-compression-selection.patch
new file mode 100644
index 0000000000..4782fc9ed8
--- /dev/null
+++ b/target/linux/generic/pending-4.14/551-ubifs-fix-default-compression-selection.patch
@@ -0,0 +1,37 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: fs: ubifs: fix default compression selection in ubifs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ fs/ubifs/sb.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+--- a/fs/ubifs/sb.c
++++ b/fs/ubifs/sb.c
+@@ -63,6 +63,17 @@
+ /* Default time granularity in nanoseconds */
+ #define DEFAULT_TIME_GRAN 1000000000
+ 
++static int get_default_compressor(void)
++{
++	if (ubifs_compr_present(UBIFS_COMPR_LZO))
++		return UBIFS_COMPR_LZO;
++
++	if (ubifs_compr_present(UBIFS_COMPR_ZLIB))
++		return UBIFS_COMPR_ZLIB;
++
++	return UBIFS_COMPR_NONE;
++}
++
+ /**
+  * create_default_filesystem - format empty UBI volume.
+  * @c: UBIFS file-system description object
+@@ -186,7 +197,7 @@ static int create_default_filesystem(str
+ 	if (c->mount_opts.override_compr)
+ 		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
+ 	else
+-		sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO);
++		sup->default_compr = cpu_to_le16(get_default_compressor());
+ 
+ 	generate_random_uuid(sup->uuid);
+ 
diff --git a/target/linux/generic/pending-4.14/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-4.14/600-netfilter_conntrack_flush.patch
new file mode 100644
index 0000000000..f39ed62dc0
--- /dev/null
+++ b/target/linux/generic/pending-4.14/600-netfilter_conntrack_flush.patch
@@ -0,0 +1,95 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: add support for flushing conntrack via /proc
+
+lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
+ 1 file changed, 58 insertions(+), 1 deletion(-)
+
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -17,6 +17,7 @@
+ #include <linux/percpu.h>
+ #include <linux/netdevice.h>
+ #include <linux/security.h>
++#include <linux/inet.h>
+ #include <net/net_namespace.h>
+ #ifdef CONFIG_SYSCTL
+ #include <linux/sysctl.h>
+@@ -377,10 +378,66 @@ static int ct_open(struct inode *inode,
+ 			sizeof(struct ct_iter_state));
+ }
+ 
++struct kill_request {
++	u16 family;
++	union nf_inet_addr addr;
++};
++
++static int kill_matching(struct nf_conn *i, void *data)
++{
++	struct kill_request *kr = data;
++	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
++	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
++
++	if (!kr->family)
++		return 1;
++
++	if (t1->src.l3num != kr->family)
++		return 0;
++
++	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
++}
++
++static ssize_t ct_file_write(struct file *file, const char __user *buf,
++			     size_t count, loff_t *ppos)
++{
++	struct seq_file *seq = file->private_data;
++	struct net *net = seq_file_net(seq);
++	struct kill_request kr = { };
++	char req[INET6_ADDRSTRLEN] = { };
++
++	if (count == 0)
++		return 0;
++
++	if (count >= INET6_ADDRSTRLEN)
++		count = INET6_ADDRSTRLEN - 1;
++
++	if (copy_from_user(req, buf, count))
++		return -EFAULT;
++
++	if (strnchr(req, count, ':')) {
++		kr.family = AF_INET6;
++		if (!in6_pton(req, count, (void *)&kr.addr, '\n', NULL))
++			return -EINVAL;
++	} else if (strnchr(req, count, '.')) {
++		kr.family = AF_INET;
++		if (!in4_pton(req, count, (void *)&kr.addr, '\n', NULL))
++			return -EINVAL;
++	}
++
++	nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
++
++	return count;
++}
++
+ static const struct file_operations ct_file_ops = {
+ 	.owner   = THIS_MODULE,
+ 	.open    = ct_open,
+ 	.read    = seq_read,
++	.write	 = ct_file_write,
+ 	.llseek  = seq_lseek,
+ 	.release = seq_release_net,
+ };
+@@ -484,7 +541,7 @@ static int nf_conntrack_standalone_init_
+ 	kuid_t root_uid;
+ 	kgid_t root_gid;
+ 
+-	pde = proc_create("nf_conntrack", 0440, net->proc_net, &ct_file_ops);
++	pde = proc_create("nf_conntrack", 0660, net->proc_net, &ct_file_ops);
+ 	if (!pde)
+ 		goto out_nf_conntrack;
+ 
diff --git a/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch
new file mode 100644
index 0000000000..0a3c0f9677
--- /dev/null
+++ b/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch
@@ -0,0 +1,110 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
+ net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
+ 2 files changed, 38 insertions(+)
+
+--- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
++++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
+@@ -89,6 +89,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -52,6 +52,9 @@ ip_packet_match(const struct iphdr *ip,
+ {
+ 	unsigned long ret;
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
+ 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
+ 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
+@@ -82,6 +85,29 @@ ip_packet_match(const struct iphdr *ip,
+ 	return true;
+ }
+ 
++static void
++ip_checkdefault(struct ipt_ip *ip)
++{
++	static const char iface_mask[IFNAMSIZ] = {};
++
++	if (ip->invflags || ip->flags & IPT_F_FRAG)
++		return;
++
++	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (ip->smsk.s_addr || ip->dmsk.s_addr)
++		return;
++
++	if (ip->proto)
++		return;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++}
++
+ static bool
+ ip_checkentry(const struct ipt_ip *ip)
+ {
+@@ -532,6 +558,8 @@ find_check_entry(struct ipt_entry *e, st
+ 	struct xt_mtchk_param mtpar;
+ 	struct xt_entry_match *ematch;
+ 
++	ip_checkdefault(&e->ip);
++
+ 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
+ 		return -ENOMEM;
+ 
+@@ -812,6 +840,7 @@ copy_entries_to_user(unsigned int total_
+ 	const struct xt_table_info *private = table->private;
+ 	int ret = 0;
+ 	const void *loc_cpu_entry;
++	u8 flags;
+ 
+ 	counters = alloc_counters(table);
+ 	if (IS_ERR(counters))
+@@ -839,6 +868,14 @@ copy_entries_to_user(unsigned int total_
+ 			goto free_counters;
+ 		}
+ 
++		flags = e->ip.flags & IPT_F_MASK;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
++
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
+ 		     i += m->u.match_size) {
+@@ -1219,12 +1256,15 @@ compat_copy_entry_to_user(struct ipt_ent
+ 	compat_uint_t origsize;
+ 	const struct xt_entry_match *ematch;
+ 	int ret = 0;
++	u8 flags = e->ip.flags & IPT_F_MASK;
+ 
+ 	origsize = *size;
+ 	ce = *dstptr;
+ 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
+ 	    copy_to_user(&ce->counters, &counters[i],
+-	    sizeof(counters[i])) != 0)
++	    sizeof(counters[i])) != 0 ||
++	    copy_to_user(&ce->ip.flags, &flags,
++	    sizeof(flags)) != 0)
+ 		return -EFAULT;
+ 
+ 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch
new file mode 100644
index 0000000000..11f07e12b3
--- /dev/null
+++ b/target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch
@@ -0,0 +1,111 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: match bypass default table
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
+ 1 file changed, 58 insertions(+), 21 deletions(-)
+
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -248,6 +248,33 @@ struct ipt_entry *ipt_next_entry(const s
+ 	return (void *)entry + entry->next_offset;
+ }
+ 
++static bool
++ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
++{
++	struct xt_entry_target *t;
++	struct xt_standard_target *st;
++
++	if (e->target_offset != sizeof(struct ipt_entry))
++		return false;
++
++	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
++		return false;
++
++	t = ipt_get_target(e);
++	if (t->u.kernel.target->target)
++		return false;
++
++	st = (struct xt_standard_target *) t;
++	if (st->verdict == XT_RETURN)
++		return false;
++
++	if (st->verdict >= 0)
++		return false;
++
++	*verdict = (unsigned)(-st->verdict) - 1;
++	return true;
++}
++
+ /* Returns one of the generic firewall policies, like NF_ACCEPT. */
+ unsigned int
+ ipt_do_table(struct sk_buff *skb,
+@@ -268,24 +295,8 @@ ipt_do_table(struct sk_buff *skb,
+ 	unsigned int addend;
+ 
+ 	/* Initialization */
+-	stackidx = 0;
+-	ip = ip_hdr(skb);
+-	indev = state->in ? state->in->name : nulldevname;
+-	outdev = state->out ? state->out->name : nulldevname;
+-	/* We handle fragments by dealing with the first fragment as
+-	 * if it was a normal packet.  All other fragments are treated
+-	 * normally, except that they will NEVER match rules that ask
+-	 * things we don't know, ie. tcp syn flag or ports).  If the
+-	 * rule is also a fragment-specific rule, non-fragments won't
+-	 * match it. */
+-	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
+-	acpar.thoff   = ip_hdrlen(skb);
+-	acpar.hotdrop = false;
+-	acpar.state   = state;
+-
+ 	WARN_ON(!(table->valid_hooks & (1 << hook)));
+ 	local_bh_disable();
+-	addend = xt_write_recseq_begin();
+ 	private = table->private;
+ 	cpu        = smp_processor_id();
+ 	/*
+@@ -294,6 +305,23 @@ ipt_do_table(struct sk_buff *skb,
+ 	 */
+ 	smp_read_barrier_depends();
+ 	table_base = private->entries;
++
++	e = get_entry(table_base, private->hook_entry[hook]);
++	if (ipt_handle_default_rule(e, &verdict)) {
++		struct xt_counters *counter;
++
++		counter = xt_get_this_cpu_counter(&e->counters);
++		ADD_COUNTER(*counter, skb->len, 1);
++		local_bh_enable();
++		return verdict;
++	}
++
++	stackidx = 0;
++	ip = ip_hdr(skb);
++	indev = state->in ? state->in->name : nulldevname;
++	outdev = state->out ? state->out->name : nulldevname;
++
++	addend = xt_write_recseq_begin();
+ 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
+ 
+ 	/* Switch to alternate jumpstack if we're being invoked via TEE.
+@@ -306,7 +334,16 @@ ipt_do_table(struct sk_buff *skb,
+ 	if (static_key_false(&xt_tee_enabled))
+ 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
+ 
+-	e = get_entry(table_base, private->hook_entry[hook]);
++	/* We handle fragments by dealing with the first fragment as
++	 * if it was a normal packet.  All other fragments are treated
++	 * normally, except that they will NEVER match rules that ask
++	 * things we don't know, ie. tcp syn flag or ports).  If the
++	 * rule is also a fragment-specific rule, non-fragments won't
++	 * match it. */
++	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
++	acpar.thoff   = ip_hdrlen(skb);
++	acpar.hotdrop = false;
++	acpar.state   = state;
+ 
+ 	do {
+ 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-4.14/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-4.14/612-netfilter_match_reduce_memory_access.patch
new file mode 100644
index 0000000000..183c74c1c7
--- /dev/null
+++ b/target/linux/generic/pending-4.14/612-netfilter_match_reduce_memory_access.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: reduce match memory access
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/ipv4/netfilter/ip_tables.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -55,9 +55,9 @@ ip_packet_match(const struct iphdr *ip,
+ 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
+ 		return true;
+ 
+-	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
++	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
+ 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
+-	    NF_INVF(ipinfo, IPT_INV_DSTIP,
++	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
+ 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
+ 		return false;
+ 
diff --git a/target/linux/generic/pending-4.14/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-4.14/613-netfilter_optional_tcp_window_check.patch
new file mode 100644
index 0000000000..3ded90168f
--- /dev/null
+++ b/target/linux/generic/pending-4.14/613-netfilter_optional_tcp_window_check.patch
@@ -0,0 +1,44 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: optional tcp window check
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -33,6 +33,9 @@
+ #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
+ #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+ 
++/* Do not check the TCP window for incoming packets  */
++static int nf_ct_tcp_no_window_check __read_mostly = 1;
++
+ /* "Be conservative in what you do,
+     be liberal in what you accept from others."
+     If it's non-zero, we mark only out of window RST segments as INVALID. */
+@@ -505,6 +508,9 @@ static bool tcp_in_window(const struct n
+ 	s32 receiver_offset;
+ 	bool res, in_recv_win;
+ 
++	if (nf_ct_tcp_no_window_check)
++		return true;
++
+ 	/*
+ 	 * Get the required data from the packet.
+ 	 */
+@@ -1486,6 +1492,13 @@ static struct ctl_table tcp_sysctl_table
+ 		.mode		= 0644,
+ 		.proc_handler	= proc_dointvec,
+ 	},
++	{
++		.procname       = "nf_conntrack_tcp_no_window_check",
++		.data           = &nf_ct_tcp_no_window_check,
++		.maxlen         = sizeof(unsigned int),
++		.mode           = 0644,
++		.proc_handler   = proc_dointvec,
++	},
+ 	{ }
+ };
+ #endif /* CONFIG_SYSCTL */
diff --git a/target/linux/generic/pending-4.14/616-net_optimize_xfrm_calls.patch b/target/linux/generic/pending-4.14/616-net_optimize_xfrm_calls.patch
new file mode 100644
index 0000000000..c64694ea3c
--- /dev/null
+++ b/target/linux/generic/pending-4.14/616-net_optimize_xfrm_calls.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a small xfrm related performance optimization
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_nat_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/net/netfilter/nf_nat_core.c
++++ b/net/netfilter/nf_nat_core.c
+@@ -90,6 +90,9 @@ int nf_xfrm_me_harder(struct net *net, s
+ 	struct dst_entry *dst;
+ 	int err;
+ 
++	if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT])
++		return 0;
++
+ 	err = xfrm_decode_session(skb, &fl, family);
+ 	if (err < 0)
+ 		return err;
diff --git a/target/linux/generic/pending-4.14/630-packet_socket_type.patch b/target/linux/generic/pending-4.14/630-packet_socket_type.patch
new file mode 100644
index 0000000000..7a0f924b8b
--- /dev/null
+++ b/target/linux/generic/pending-4.14/630-packet_socket_type.patch
@@ -0,0 +1,138 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: add an optimization for dealing with raw sockets
+
+lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/uapi/linux/if_packet.h |  3 +++
+ net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
+ net/packet/internal.h          |  1 +
+ 3 files changed, 31 insertions(+), 7 deletions(-)
+
+--- a/include/uapi/linux/if_packet.h
++++ b/include/uapi/linux/if_packet.h
+@@ -32,6 +32,8 @@ struct sockaddr_ll {
+ #define PACKET_KERNEL		7		/* To kernel space	*/
+ /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -57,6 +59,7 @@ struct sockaddr_ll {
+ #define PACKET_QDISC_BYPASS		20
+ #define PACKET_ROLLOVER_STATS		21
+ #define PACKET_FANOUT_DATA		22
++#define PACKET_RECV_TYPE		23
+ 
+ #define PACKET_FANOUT_HASH		0
+ #define PACKET_FANOUT_LB		1
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -1829,6 +1829,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -1836,6 +1837,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -1848,7 +1850,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -2075,12 +2077,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	unsigned int snaplen, res;
+ 	bool is_drop_n_account = false;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -2206,12 +2208,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
+ 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -3252,6 +3254,7 @@ static int packet_create(struct net *net
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->rollover = NULL;
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -3838,6 +3841,16 @@ packet_setsockopt(struct socket *sock, i
+ 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
+ 		return 0;
+ 	}
++        case PACKET_RECV_TYPE:
++        {
++                unsigned int val;
++                if (optlen != sizeof(val))
++                        return -EINVAL;
++                if (copy_from_user(&val, optval, sizeof(val)))
++                        return -EFAULT;
++                po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
++                return 0;
++        }
+ 	default:
+ 		return -ENOPROTOOPT;
+ 	}
+@@ -3891,6 +3904,13 @@ static int packet_getsockopt(struct sock
+ 	case PACKET_VNET_HDR:
+ 		val = po->has_vnet_hdr;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ 	case PACKET_VERSION:
+ 		val = po->tp_version;
+ 		break;
+--- a/net/packet/internal.h
++++ b/net/packet/internal.h
+@@ -132,6 +132,7 @@ struct packet_sock {
+ 	struct net_device __rcu	*cached_dev;
+ 	int			(*xmit)(struct sk_buff *skb);
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	unsigned int		pkt_type;
+ };
+ 
+ static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-4.14/650-pppoe_header_pad.patch b/target/linux/generic/pending-4.14/650-pppoe_header_pad.patch
new file mode 100644
index 0000000000..3115073b50
--- /dev/null
+++ b/target/linux/generic/pending-4.14/650-pppoe_header_pad.patch
@@ -0,0 +1,29 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: pppoe: add extra padding for the header (useful for drivers that need headroom)
+
+lede-commit 6517a757ec711fc3354b857e273e2621042f3c7a
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/net/ppp/pppoe.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ppp/pppoe.c
++++ b/drivers/net/ppp/pppoe.c
+@@ -861,7 +861,7 @@ static int pppoe_sendmsg(struct socket *
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -869,7 +869,7 @@ static int pppoe_sendmsg(struct socket *
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/pending-4.14/655-increase_skb_pad.patch b/target/linux/generic/pending-4.14/655-increase_skb_pad.patch
new file mode 100644
index 0000000000..4bc8a5e1ca
--- /dev/null
+++ b/target/linux/generic/pending-4.14/655-increase_skb_pad.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
+
+lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/skbuff.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -2456,7 +2456,7 @@ static inline int pskb_network_may_pull(
+  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
+  */
+ #ifndef NET_SKB_PAD
+-#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
++#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
+ #endif
+ 
+ int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-4.14/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-4.14/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
new file mode 100644
index 0000000000..a114acda92
--- /dev/null
+++ b/target/linux/generic/pending-4.14/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
@@ -0,0 +1,500 @@
+From: Steven Barth <steven@midlink.org>
+Subject: Add support for MAP-E FMRs (mesh mode)
+
+MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
+between MAP CEs (mesh mode) without the need to forward such data to a
+border relay. This is similar to how 6rd works but for IPv4 over IPv6.
+
+Signed-off-by: Steven Barth <cyrus@openwrt.org>
+---
+ include/net/ip6_tunnel.h       |  13 ++
+ include/uapi/linux/if_tunnel.h |  13 ++
+ net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
+ 3 files changed, 291 insertions(+), 11 deletions(-)
+
+--- a/include/net/ip6_tunnel.h
++++ b/include/net/ip6_tunnel.h
+@@ -18,6 +18,18 @@
+ /* determine capability on a per-packet basis */
+ #define IP6_TNL_F_CAP_PER_PACKET 0x40000
+ 
++/* IPv6 tunnel FMR */
++struct __ip6_tnl_fmr {
++	struct __ip6_tnl_fmr *next; /* next fmr in list */
++	struct in6_addr ip6_prefix;
++	struct in_addr ip4_prefix;
++
++	__u8 ip6_prefix_len;
++	__u8 ip4_prefix_len;
++	__u8 ea_len;
++	__u8 offset;
++};
++
+ struct __ip6_tnl_parm {
+ 	char name[IFNAMSIZ];	/* name of tunnel device */
+ 	int link;		/* ifindex of underlying L2 interface */
+@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
+ 	__u32 flags;		/* tunnel flags */
+ 	struct in6_addr laddr;	/* local tunnel end-point address */
+ 	struct in6_addr raddr;	/* remote tunnel end-point address */
++	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
+ 
+ 	__be16			i_flags;
+ 	__be16			o_flags;
+--- a/include/uapi/linux/if_tunnel.h
++++ b/include/uapi/linux/if_tunnel.h
+@@ -77,10 +77,23 @@ enum {
+ 	IFLA_IPTUN_ENCAP_DPORT,
+ 	IFLA_IPTUN_COLLECT_METADATA,
+ 	IFLA_IPTUN_FWMARK,
++	IFLA_IPTUN_FMRS,
+ 	__IFLA_IPTUN_MAX,
+ };
+ #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
+ 
++enum {
++	IFLA_IPTUN_FMR_UNSPEC,
++	IFLA_IPTUN_FMR_IP6_PREFIX,
++	IFLA_IPTUN_FMR_IP4_PREFIX,
++	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
++	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
++	IFLA_IPTUN_FMR_EA_LEN,
++	IFLA_IPTUN_FMR_OFFSET,
++	__IFLA_IPTUN_FMR_MAX,
++};
++#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
++
+ enum tunnel_encap_types {
+ 	TUNNEL_ENCAP_NONE,
+ 	TUNNEL_ENCAP_FOU,
+--- a/net/ipv6/ip6_tunnel.c
++++ b/net/ipv6/ip6_tunnel.c
+@@ -16,6 +16,8 @@
+  *      as published by the Free Software Foundation; either version
+  *      2 of the License, or (at your option) any later version.
+  *
++ *	Changes:
++ * Steven Barth <cyrus@openwrt.org>:		MAP-E FMR support
+  */
+ 
+ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+@@ -72,9 +74,9 @@ static bool log_ecn_error = true;
+ module_param(log_ecn_error, bool, 0644);
+ MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
+ 
+-static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
++static u32 HASH(const struct in6_addr *addr)
+ {
+-	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
++	u32 hash = ipv6_addr_hash(addr);
+ 
+ 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
+ }
+@@ -141,20 +143,29 @@ static struct net_device_stats *ip6_get_
+ static struct ip6_tnl *
+ ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
+ {
+-	unsigned int hash = HASH(remote, local);
++	unsigned int hash = HASH(local);
+ 	struct ip6_tnl *t;
+ 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ 	struct in6_addr any;
++	struct __ip6_tnl_fmr *fmr;
+ 
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+-		if (ipv6_addr_equal(local, &t->parms.laddr) &&
+-		    ipv6_addr_equal(remote, &t->parms.raddr) &&
+-		    (t->dev->flags & IFF_UP))
++		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
++				!(t->dev->flags & IFF_UP))
++			continue;
++
++		if (ipv6_addr_equal(remote, &t->parms.raddr))
+ 			return t;
++
++		for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
++			if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
++					fmr->ip6_prefix_len))
++				return t;
++		}
+ 	}
+ 
+ 	memset(&any, 0, sizeof(any));
+-	hash = HASH(&any, local);
++	hash = HASH(local);
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+ 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
+ 		    ipv6_addr_any(&t->parms.raddr) &&
+@@ -162,7 +173,7 @@ ip6_tnl_lookup(struct net *net, const st
+ 			return t;
+ 	}
+ 
+-	hash = HASH(remote, &any);
++	hash = HASH(&any);
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+ 		if (ipv6_addr_equal(remote, &t->parms.raddr) &&
+ 		    ipv6_addr_any(&t->parms.laddr) &&
+@@ -202,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
+ 
+ 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
+ 		prio = 1;
+-		h = HASH(remote, local);
++		h = HASH(local);
+ 	}
+ 	return &ip6n->tnls[prio][h];
+ }
+@@ -380,6 +391,12 @@ ip6_tnl_dev_uninit(struct net_device *de
+ 	struct net *net = t->net;
+ 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ 
++	while (t->parms.fmrs) {
++		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
++		kfree(t->parms.fmrs);
++		t->parms.fmrs = next;
++	}
++
+ 	if (dev == ip6n->fb_tnl_dev)
+ 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
+ 	else
+@@ -776,6 +793,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
+ }
+ EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
+ 
++/**
++ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
++ *   @dest: destination IPv6 address buffer
++ *   @skb: received socket buffer
++ *   @fmr: MAP FMR
++ *   @xmit: Calculate for xmit or rcv
++ **/
++static void ip4ip6_fmr_calc(struct in6_addr *dest,
++		const struct iphdr *iph, const uint8_t *end,
++		const struct __ip6_tnl_fmr *fmr, bool xmit)
++{
++	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
++	u8 *portp = NULL;
++	bool use_dest_addr;
++	const struct iphdr *dsth = iph;
++
++	if ((u8*)dsth >= end)
++		return;
++
++	/* find significant IP header */
++	if (iph->protocol == IPPROTO_ICMP) {
++		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
++		if (ih && ((u8*)&ih[1]) <= end && (
++			ih->type == ICMP_DEST_UNREACH ||
++			ih->type == ICMP_SOURCE_QUENCH ||
++			ih->type == ICMP_TIME_EXCEEDED ||
++			ih->type == ICMP_PARAMETERPROB ||
++			ih->type == ICMP_REDIRECT))
++				dsth = (const struct iphdr*)&ih[1];
++	}
++
++	/* in xmit-path use dest port by default and source port only if
++		this is an ICMP reply to something else; vice versa in rcv-path */
++	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
++
++	/* get dst port */
++	if (((u8*)&dsth[1]) <= end && (
++		dsth->protocol == IPPROTO_UDP ||
++		dsth->protocol == IPPROTO_TCP ||
++		dsth->protocol == IPPROTO_SCTP ||
++		dsth->protocol == IPPROTO_DCCP)) {
++			/* for UDP, TCP, SCTP and DCCP source and dest port
++			follow IPv4 header directly */
++			portp = ((u8*)dsth) + dsth->ihl * 4;
++
++			if (use_dest_addr)
++				portp += sizeof(u16);
++	} else if (iph->protocol == IPPROTO_ICMP) {
++		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
++
++		/* use icmp identifier as port */
++		if (((u8*)&ih) <= end && (
++		    (use_dest_addr && (
++		    ih->type == ICMP_ECHOREPLY ||
++			ih->type == ICMP_TIMESTAMPREPLY ||
++			ih->type == ICMP_INFO_REPLY ||
++			ih->type == ICMP_ADDRESSREPLY)) ||
++			(!use_dest_addr && (
++			ih->type == ICMP_ECHO ||
++			ih->type == ICMP_TIMESTAMP ||
++			ih->type == ICMP_INFO_REQUEST ||
++			ih->type == ICMP_ADDRESS)
++			)))
++				portp = (u8*)&ih->un.echo.id;
++	}
++
++	if ((portp && &portp[2] <= end) || psidlen == 0) {
++		int frombyte = fmr->ip6_prefix_len / 8;
++		int fromrem = fmr->ip6_prefix_len % 8;
++		int bytes = sizeof(struct in6_addr) - frombyte;
++		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
++		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
++		u64 t = 0;
++
++		/* extract PSID from port and add it to eabits */
++		u16 psidbits = 0;
++		if (psidlen > 0) {
++			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
++			psidbits >>= 16 - psidlen - fmr->offset;
++			psidbits = (u16)(psidbits << (16 - psidlen));
++			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
++		}
++
++		/* rewrite destination address */
++		*dest = fmr->ip6_prefix;
++		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
++		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
++
++		if (bytes > sizeof(u64))
++			bytes = sizeof(u64);
++
++		/* insert eabits */
++		memcpy(&t, &dest->s6_addr[frombyte], bytes);
++		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
++			<< (64 - fmr->ea_len - fromrem));
++		t = cpu_to_be64(t | (eabits >> fromrem));
++		memcpy(&dest->s6_addr[frombyte], &t, bytes);
++	}
++}
++
++
+ static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
+ 			 const struct tnl_ptk_info *tpi,
+ 			 struct metadata_dst *tun_dst,
+@@ -828,6 +946,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
+ 	skb_reset_network_header(skb);
+ 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
+ 
++	if (tpi->proto == htons(ETH_P_IP) &&
++		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
++			/* Packet didn't come from BR, so lookup FMR */
++			struct __ip6_tnl_fmr *fmr;
++			struct in6_addr expected = tunnel->parms.raddr;
++			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
++				if (ipv6_prefix_equal(&ipv6h->saddr,
++					&fmr->ip6_prefix, fmr->ip6_prefix_len))
++						break;
++
++			/* Check that IPv6 matches IPv4 source to prevent spoofing */
++			if (fmr)
++				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
++						skb_tail_pointer(skb), fmr, false);
++
++			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
++				rcu_read_unlock();
++				goto drop;
++			}
++	}
++
+ 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
+ 
+ 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
+@@ -959,6 +1098,7 @@ static void init_tel_txopt(struct ipv6_t
+ 	opt->ops.opt_nflen = 8;
+ }
+ 
++
+ /**
+  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
+  *   @t: the outgoing tunnel device
+@@ -1295,6 +1435,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+ {
+ 	struct ip6_tnl *t = netdev_priv(dev);
+ 	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
++	struct __ip6_tnl_fmr *fmr;
+ 	int encap_limit = -1;
+ 	__u16 offset;
+ 	struct flowi6 fl6;
+@@ -1357,6 +1498,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+ 
+ 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ 
++	/* try to find matching FMR */
++	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
++		unsigned mshift = 32 - fmr->ip4_prefix_len;
++		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
++				ntohl(ip_hdr(skb)->daddr) >> mshift)
++			break;
++	}
++
++	/* change dstaddr according to FMR */
++	if (fmr)
++		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
++
+ 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
+ 		return -1;
+ 
+@@ -1485,6 +1638,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+ 	t->parms.link = p->link;
+ 	t->parms.proto = p->proto;
+ 	t->parms.fwmark = p->fwmark;
++
++	while (t->parms.fmrs) {
++		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
++		kfree(t->parms.fmrs);
++		t->parms.fmrs = next;
++	}
++	t->parms.fmrs = p->fmrs;
++
+ 	dst_cache_reset(&t->dst_cache);
+ 	ip6_tnl_link_config(t);
+ 	return 0;
+@@ -1523,6 +1684,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+ 	p->flowinfo = u->flowinfo;
+ 	p->link = u->link;
+ 	p->proto = u->proto;
++	p->fmrs = NULL;
+ 	memcpy(p->name, u->name, sizeof(u->name));
+ }
+ 
+@@ -1904,6 +2066,15 @@ static int ip6_tnl_validate(struct nlatt
+ 	return 0;
+ }
+ 
++static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
++	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
++	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
++	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
++};
++
+ static void ip6_tnl_netlink_parms(struct nlattr *data[],
+ 				  struct __ip6_tnl_parm *parms)
+ {
+@@ -1941,6 +2112,46 @@ static void ip6_tnl_netlink_parms(struct
+ 
+ 	if (data[IFLA_IPTUN_FWMARK])
+ 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
++
++	if (data[IFLA_IPTUN_FMRS]) {
++		unsigned rem;
++		struct nlattr *fmr;
++		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
++			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
++			struct __ip6_tnl_fmr *nfmr;
++
++			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
++				fmr, ip6_tnl_fmr_policy, NULL);
++
++			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
++				continue;
++
++			nfmr->offset = 6;
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
++				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
++					sizeof(nfmr->ip6_prefix));
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
++				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
++					sizeof(nfmr->ip4_prefix));
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
++				nfmr->ip6_prefix_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
++				nfmr->ip4_prefix_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
++				nfmr->ea_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
++				nfmr->offset = nla_get_u8(c);
++
++			nfmr->next = parms->fmrs;
++			parms->fmrs = nfmr;
++		}
++	}
+ }
+ 
+ static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
+@@ -2052,6 +2263,12 @@ static void ip6_tnl_dellink(struct net_d
+ 
+ static size_t ip6_tnl_get_size(const struct net_device *dev)
+ {
++	const struct ip6_tnl *t = netdev_priv(dev);
++	struct __ip6_tnl_fmr *c;
++	int fmrs = 0;
++	for (c = t->parms.fmrs; c; c = c->next)
++		++fmrs;
++
+ 	return
+ 		/* IFLA_IPTUN_LINK */
+ 		nla_total_size(4) +
+@@ -2081,6 +2298,24 @@ static size_t ip6_tnl_get_size(const str
+ 		nla_total_size(0) +
+ 		/* IFLA_IPTUN_FWMARK */
+ 		nla_total_size(4) +
++		/* IFLA_IPTUN_FMRS */
++		nla_total_size(0) +
++		(
++			/* nest */
++			nla_total_size(0) +
++			/* IFLA_IPTUN_FMR_IP6_PREFIX */
++			nla_total_size(sizeof(struct in6_addr)) +
++			/* IFLA_IPTUN_FMR_IP4_PREFIX */
++			nla_total_size(sizeof(struct in_addr)) +
++			/* IFLA_IPTUN_FMR_EA_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_OFFSET */
++			nla_total_size(1)
++		) * fmrs +
+ 		0;
+ }
+ 
+@@ -2088,6 +2323,9 @@ static int ip6_tnl_fill_info(struct sk_b
+ {
+ 	struct ip6_tnl *tunnel = netdev_priv(dev);
+ 	struct __ip6_tnl_parm *parm = &tunnel->parms;
++	struct __ip6_tnl_fmr *c;
++	int fmrcnt = 0;
++	struct nlattr *fmrs;
+ 
+ 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
+ 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
+@@ -2097,9 +2335,27 @@ static int ip6_tnl_fill_info(struct sk_b
+ 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
+ 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
+ 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
+-	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
++	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
++	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
+ 		goto nla_put_failure;
+ 
++	for (c = parm->fmrs; c; c = c->next) {
++		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
++		if (!fmr ||
++			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
++				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
++			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
++				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
++				goto nla_put_failure;
++
++		nla_nest_end(skb, fmr);
++	}
++	nla_nest_end(skb, fmrs);
++
+ 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
+ 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
+ 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
+@@ -2139,6 +2395,7 @@ static const struct nla_policy ip6_tnl_p
+ 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
+ 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
+ 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
++	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
+ };
+ 
+ static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-4.14/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.14/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
new file mode 100644
index 0000000000..82b9ba5354
--- /dev/null
+++ b/target/linux/generic/pending-4.14/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -0,0 +1,247 @@
+From: Jonas Gorski <jogo@openwrt.org>
+Subject: ipv6: allow rejecting with "source address failed policy"
+
+RFC6204 L-14 requires rejecting traffic from invalid addresses with
+ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
+egress policy) on the LAN side, so add an appropriate rule for that.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/net/netns/ipv6.h       |  1 +
+ include/uapi/linux/fib_rules.h |  4 +++
+ include/uapi/linux/rtnetlink.h |  1 +
+ net/ipv4/fib_semantics.c       |  4 +++
+ net/ipv4/fib_trie.c            |  1 +
+ net/ipv4/ipmr.c                |  1 +
+ net/ipv6/fib6_rules.c          |  4 +++
+ net/ipv6/ip6mr.c               |  2 ++
+ net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
+ 9 files changed, 75 insertions(+), 1 deletion(-)
+
+--- a/include/net/netns/ipv6.h
++++ b/include/net/netns/ipv6.h
+@@ -69,6 +69,7 @@ struct netns_ipv6 {
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 	bool			 fib6_has_custom_rules;
+ 	struct rt6_info         *ip6_prohibit_entry;
++	struct rt6_info		*ip6_policy_failed_entry;
+ 	struct rt6_info         *ip6_blk_hole_entry;
+ 	struct fib6_table       *fib6_local_tbl;
+ 	struct fib_rules_ops    *fib6_rules_ops;
+--- a/include/uapi/linux/fib_rules.h
++++ b/include/uapi/linux/fib_rules.h
+@@ -73,6 +73,10 @@ enum {
+ 	FR_ACT_BLACKHOLE,	/* Drop without notification */
+ 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
+ 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
++	FR_ACT_RES9,
++	FR_ACT_RES10,
++	FR_ACT_RES11,
++	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
+ 	__FR_ACT_MAX,
+ };
+ 
+--- a/include/uapi/linux/rtnetlink.h
++++ b/include/uapi/linux/rtnetlink.h
+@@ -221,6 +221,7 @@ enum {
+ 	RTN_THROW,		/* Not in this table		*/
+ 	RTN_NAT,		/* Translate this address	*/
+ 	RTN_XRESOLVE,		/* Use external resolver	*/
++	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
+ 	__RTN_MAX
+ };
+ 
+--- a/net/ipv4/fib_semantics.c
++++ b/net/ipv4/fib_semantics.c
+@@ -139,6 +139,10 @@ const struct fib_prop fib_props[RTN_MAX
+ 		.error	= -EINVAL,
+ 		.scope	= RT_SCOPE_NOWHERE,
+ 	},
++	[RTN_POLICY_FAILED] = {
++		.error	= -EACCES,
++		.scope	= RT_SCOPE_UNIVERSE,
++	},
+ };
+ 
+ static void rt_fibinfo_free(struct rtable __rcu **rtp)
+--- a/net/ipv4/fib_trie.c
++++ b/net/ipv4/fib_trie.c
+@@ -2460,6 +2460,7 @@ static const char *const rtn_type_names[
+ 	[RTN_THROW] = "THROW",
+ 	[RTN_NAT] = "NAT",
+ 	[RTN_XRESOLVE] = "XRESOLVE",
++	[RTN_POLICY_FAILED] = "POLICY_FAILED",
+ };
+ 
+ static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
+--- a/net/ipv4/ipmr.c
++++ b/net/ipv4/ipmr.c
+@@ -161,6 +161,7 @@ static int ipmr_rule_action(struct fib_r
+ 	case FR_ACT_UNREACHABLE:
+ 		return -ENETUNREACH;
+ 	case FR_ACT_PROHIBIT:
++	case FR_ACT_POLICY_FAILED:
+ 		return -EACCES;
+ 	case FR_ACT_BLACKHOLE:
+ 	default:
+--- a/net/ipv6/fib6_rules.c
++++ b/net/ipv6/fib6_rules.c
+@@ -121,6 +121,10 @@ static int fib6_rule_action(struct fib_r
+ 		err = -EACCES;
+ 		rt = net->ipv6.ip6_prohibit_entry;
+ 		goto discard_pkt;
++	case FR_ACT_POLICY_FAILED:
++		err = -EACCES;
++		rt = net->ipv6.ip6_policy_failed_entry;
++		goto discard_pkt;
+ 	}
+ 
+ 	tb_id = fib_rule_get_table(rule, arg);
+--- a/net/ipv6/ip6mr.c
++++ b/net/ipv6/ip6mr.c
+@@ -168,6 +168,8 @@ static int ip6mr_rule_action(struct fib_
+ 		return -ENETUNREACH;
+ 	case FR_ACT_PROHIBIT:
+ 		return -EACCES;
++	case FR_ACT_POLICY_FAILED:
++		return -EACCES;
+ 	case FR_ACT_BLACKHOLE:
+ 	default:
+ 		return -EINVAL;
+--- a/net/ipv6/route.c
++++ b/net/ipv6/route.c
+@@ -91,6 +91,8 @@ static int		ip6_pkt_discard(struct sk_bu
+ static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
+ static int		ip6_pkt_prohibit(struct sk_buff *skb);
+ static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
++static int		ip6_pkt_policy_failed(struct sk_buff *skb);
++static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
+ static void		ip6_link_failure(struct sk_buff *skb);
+ static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
+ 					   struct sk_buff *skb, u32 mtu);
+@@ -321,6 +323,21 @@ static const struct rt6_info ip6_prohibi
+ 	.rt6i_ref	= ATOMIC_INIT(1),
+ };
+ 
++static const struct rt6_info ip6_policy_failed_entry_template = {
++	.dst = {
++		.__refcnt	= ATOMIC_INIT(1),
++		.__use		= 1,
++		.obsolete	= DST_OBSOLETE_FORCE_CHK,
++		.error		= -EACCES,
++		.input		= ip6_pkt_policy_failed,
++		.output		= ip6_pkt_policy_failed_out,
++	},
++	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
++	.rt6i_protocol	= RTPROT_KERNEL,
++	.rt6i_metric	= ~(u32) 0,
++	.rt6i_ref	= ATOMIC_INIT(1),
++};
++
+ static const struct rt6_info ip6_blk_hole_entry_template = {
+ 	.dst = {
+ 		.__refcnt	= ATOMIC_INIT(1),
+@@ -2037,6 +2054,11 @@ static struct rt6_info *ip6_route_info_c
+ 			rt->dst.output = ip6_pkt_prohibit_out;
+ 			rt->dst.input = ip6_pkt_prohibit;
+ 			break;
++		case RTN_POLICY_FAILED:
++			rt->dst.error = -EACCES;
++			rt->dst.output = ip6_pkt_policy_failed_out;
++			rt->dst.input = ip6_pkt_policy_failed;
++			break;
+ 		case RTN_THROW:
+ 		case RTN_UNREACHABLE:
+ 		default:
+@@ -2762,6 +2784,17 @@ static int ip6_pkt_prohibit_out(struct n
+ 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
+ }
+ 
++static int ip6_pkt_policy_failed(struct sk_buff *skb)
++{
++	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
++}
++
++static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
++{
++	skb->dev = skb_dst(skb)->dev;
++	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
++}
++
+ /*
+  *	Allocate a dst for local (unicast / anycast) address.
+  */
+@@ -2996,7 +3029,8 @@ static int rtm_to_fib6_config(struct sk_
+ 	if (rtm->rtm_type == RTN_UNREACHABLE ||
+ 	    rtm->rtm_type == RTN_BLACKHOLE ||
+ 	    rtm->rtm_type == RTN_PROHIBIT ||
+-	    rtm->rtm_type == RTN_THROW)
++	    rtm->rtm_type == RTN_THROW ||
++	    rtm->rtm_type == RTN_POLICY_FAILED)
+ 		cfg->fc_flags |= RTF_REJECT;
+ 
+ 	if (rtm->rtm_type == RTN_LOCAL)
+@@ -3486,6 +3520,9 @@ static int rt6_fill_node(struct net *net
+ 		case -EACCES:
+ 			rtm->rtm_type = RTN_PROHIBIT;
+ 			break;
++		case -EPERM:
++			rtm->rtm_type = RTN_POLICY_FAILED;
++			break;
+ 		case -EAGAIN:
+ 			rtm->rtm_type = RTN_THROW;
+ 			break;
+@@ -3801,6 +3838,8 @@ static int ip6_route_dev_notify(struct n
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
+ 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
++		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
++		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
+ 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
+ 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
+ #endif
+@@ -4028,6 +4067,17 @@ static int __net_init ip6_route_net_init
+ 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
+ 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
+ 			 ip6_template_metrics, true);
++
++	net->ipv6.ip6_policy_failed_entry =
++		kmemdup(&ip6_policy_failed_entry_template,
++			sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
++	if (!net->ipv6.ip6_policy_failed_entry)
++		goto out_ip6_blk_hole_entry;
++	net->ipv6.ip6_policy_failed_entry->dst.path =
++		(struct dst_entry *)net->ipv6.ip6_policy_failed_entry;
++	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
++	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
++			 ip6_template_metrics, true);
+ #endif
+ 
+ 	net->ipv6.sysctl.flush_delay = 0;
+@@ -4046,6 +4096,8 @@ out:
+ 	return ret;
+ 
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
++out_ip6_blk_hole_entry:
++	kfree(net->ipv6.ip6_blk_hole_entry);
+ out_ip6_prohibit_entry:
+ 	kfree(net->ipv6.ip6_prohibit_entry);
+ out_ip6_null_entry:
+@@ -4063,6 +4115,7 @@ static void __net_exit ip6_route_net_exi
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 	kfree(net->ipv6.ip6_prohibit_entry);
+ 	kfree(net->ipv6.ip6_blk_hole_entry);
++	kfree(net->ipv6.ip6_policy_failed_entry);
+ #endif
+ 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
+ }
+@@ -4136,6 +4189,9 @@ void __init ip6_route_init_special_entri
+ 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
+ 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
+ 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
++	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
++	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
++		in6_dev_get(init_net.loopback_dev);
+   #endif
+ }
+ 
diff --git a/target/linux/generic/pending-4.14/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-4.14/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
new file mode 100644
index 0000000000..cfea527e3d
--- /dev/null
+++ b/target/linux/generic/pending-4.14/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
@@ -0,0 +1,50 @@
+From: Jonas Gorski <jogo@openwrt.org>
+Subject: net: provide defines for _POLICY_FAILED until all code is updated
+
+Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
+unreachable, conflicting with our name.
+
+Add appropriate defines to allow our code to build with the new
+name until we have updated our local patches for older kernels
+and userspace packages.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/uapi/linux/fib_rules.h | 2 ++
+ include/uapi/linux/icmpv6.h    | 2 ++
+ include/uapi/linux/rtnetlink.h | 2 ++
+ 3 files changed, 6 insertions(+)
+
+--- a/include/uapi/linux/fib_rules.h
++++ b/include/uapi/linux/fib_rules.h
+@@ -80,6 +80,8 @@ enum {
+ 	__FR_ACT_MAX,
+ };
+ 
++#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
++
+ #define FR_ACT_MAX (__FR_ACT_MAX - 1)
+ 
+ #endif
+--- a/include/uapi/linux/icmpv6.h
++++ b/include/uapi/linux/icmpv6.h
+@@ -119,6 +119,8 @@ struct icmp6hdr {
+ #define ICMPV6_POLICY_FAIL		5
+ #define ICMPV6_REJECT_ROUTE		6
+ 
++#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
++
+ /*
+  *	Codes for Time Exceeded
+  */
+--- a/include/uapi/linux/rtnetlink.h
++++ b/include/uapi/linux/rtnetlink.h
+@@ -225,6 +225,8 @@ enum {
+ 	__RTN_MAX
+ };
+ 
++#define RTN_FAILED_POLICY RTN_POLICY_FAILED
++
+ #define RTN_MAX (__RTN_MAX - 1)
+ 
+ 
diff --git a/target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
new file mode 100644
index 0000000000..4467975b92
--- /dev/null
+++ b/target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
@@ -0,0 +1,145 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/netdevice.h |  2 ++
+ include/linux/skbuff.h    |  3 ++-
+ net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
+ net/ethernet/eth.c        | 18 +++++++++++++++++-
+ 4 files changed, 69 insertions(+), 2 deletions(-)
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1739,6 +1739,8 @@ struct net_device {
+ 	struct netdev_hw_addr_list	mc;
+ 	struct netdev_hw_addr_list	dev_addrs;
+ 
++	unsigned char		local_addr_mask[MAX_ADDR_LEN];
++
+ #ifdef CONFIG_SYSFS
+ 	struct kset		*queues_kset;
+ #endif
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -778,6 +778,7 @@ struct sk_buff {
+ 	__u8			tc_redirected:1;
+ 	__u8			tc_from_ingress:1;
+ #endif
++	__u8			gro_skip:1;
+ 
+ #ifdef CONFIG_NET_SCHED
+ 	__u16			tc_index;	/* traffic control index */
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -4756,6 +4756,9 @@ static enum gro_result dev_gro_receive(s
+ 	enum gro_result ret;
+ 	int grow;
+ 
++	if (skb->gro_skip)
++		goto normal;
++
+ 	if (netif_elide_gro(skb->dev))
+ 		goto normal;
+ 
+@@ -6226,6 +6229,48 @@ static void __netdev_adjacent_dev_unlink
+ 					   &upper_dev->adj_list.lower);
+ }
+ 
++static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
++			       struct net_device *dev)
++{
++	int i;
++
++	for (i = 0; i < dev->addr_len; i++)
++		mask[i] |= addr[i] ^ dev->dev_addr[i];
++}
++
++static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
++				struct net_device *lower)
++{
++	struct net_device *cur;
++	struct list_head *iter;
++
++	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
++		__netdev_addr_mask(mask, cur->dev_addr, lower);
++		__netdev_upper_mask(mask, cur, lower);
++	}
++}
++
++static void __netdev_update_addr_mask(struct net_device *dev)
++{
++	unsigned char mask[MAX_ADDR_LEN];
++	struct net_device *cur;
++	struct list_head *iter;
++
++	memset(mask, 0, sizeof(mask));
++	__netdev_upper_mask(mask, dev, dev);
++	memcpy(dev->local_addr_mask, mask, dev->addr_len);
++
++	netdev_for_each_lower_dev(dev, cur, iter)
++		__netdev_update_addr_mask(cur);
++}
++
++static void netdev_update_addr_mask(struct net_device *dev)
++{
++	rcu_read_lock();
++	__netdev_update_addr_mask(dev);
++	rcu_read_unlock();
++}
++
+ static int __netdev_upper_dev_link(struct net_device *dev,
+ 				   struct net_device *upper_dev, bool master,
+ 				   void *upper_priv, void *upper_info)
+@@ -6341,6 +6386,8 @@ void netdev_upper_dev_unlink(struct net_
+ 
+ 	__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
+ 
++	netdev_update_addr_mask(dev);
++	netdev_update_addr_mask(dev);
+ 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
+ 				      &changeupper_info.info);
+ }
+@@ -6911,6 +6958,7 @@ int dev_set_mac_address(struct net_devic
+ 	if (err)
+ 		return err;
+ 	dev->addr_assign_type = NET_ADDR_SET;
++	netdev_update_addr_mask(dev);
+ 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ 	add_device_randomness(dev->dev_addr, dev->addr_len);
+ 	return 0;
+--- a/net/ethernet/eth.c
++++ b/net/ethernet/eth.c
+@@ -144,6 +144,18 @@ u32 eth_get_headlen(void *data, unsigned
+ }
+ EXPORT_SYMBOL(eth_get_headlen);
+ 
++static inline bool
++eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
++{
++	const u16 *a1 = addr1;
++	const u16 *a2 = addr2;
++	const u16 *m = mask;
++
++	return (((a1[0] ^ a2[0]) & ~m[0]) |
++		((a1[1] ^ a2[1]) & ~m[1]) |
++		((a1[2] ^ a2[2]) & ~m[2]));
++}
++
+ /**
+  * eth_type_trans - determine the packet's protocol ID.
+  * @skb: received socket data
+@@ -172,8 +184,12 @@ __be16 eth_type_trans(struct sk_buff *sk
+ 			skb->pkt_type = PACKET_MULTICAST;
+ 	}
+ 	else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
+-						   dev->dev_addr)))
++						   dev->dev_addr))) {
+ 		skb->pkt_type = PACKET_OTHERHOST;
++		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
++					 dev->local_addr_mask))
++			skb->gro_skip = 1;
++	}
+ 
+ 	/*
+ 	 * Some variants of DSA tagging don't have an ethertype field
diff --git a/target/linux/generic/pending-4.14/681-NET-add-of_get_mac_address_mtd.patch b/target/linux/generic/pending-4.14/681-NET-add-of_get_mac_address_mtd.patch
new file mode 100644
index 0000000000..b29b5f11b0
--- /dev/null
+++ b/target/linux/generic/pending-4.14/681-NET-add-of_get_mac_address_mtd.patch
@@ -0,0 +1,127 @@
+From: John Crispin <blogic@openwrt.org>
+Subject: NET: add mtd-mac-address support to of_get_mac_address()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h |    1 +
+ 2 files changed, 38 insertions(+)
+
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -10,6 +10,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+ 
+ /**
+  * of_get_phy_mode - Get phy mode for given device_node
+@@ -38,7 +39,7 @@ int of_get_phy_mode(struct device_node *
+ }
+ EXPORT_SYMBOL_GPL(of_get_phy_mode);
+ 
+-static const void *of_get_mac_addr(struct device_node *np, const char *name)
++static void *of_get_mac_addr(struct device_node *np, const char *name)
+ {
+ 	struct property *pp = of_find_property(np, name, NULL);
+ 
+@@ -47,6 +48,73 @@ static const void *of_get_mac_addr(struc
+ 	return NULL;
+ }
+ 
++static const void *of_get_mac_address_mtd(struct device_node *np)
++{
++#ifdef CONFIG_MTD
++	struct device_node *mtd_np = NULL;
++	struct property *prop;
++	size_t retlen;
++	int size, ret;
++	struct mtd_info *mtd;
++	const char *part;
++	const __be32 *list;
++	phandle phandle;
++	u32 mac_inc = 0;
++	u8 mac[ETH_ALEN];
++	void *addr;
++
++	list = of_get_property(np, "mtd-mac-address", &size);
++	if (!list || (size != (2 * sizeof(*list))))
++		return NULL;
++
++	phandle = be32_to_cpup(list++);
++	if (phandle)
++		mtd_np = of_find_node_by_phandle(phandle);
++
++	if (!mtd_np)
++		return NULL;
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	mtd = get_mtd_device_nm(part);
++	if (IS_ERR(mtd))
++		return NULL;
++
++	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
++	put_mtd_device(mtd);
++
++	if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
++		mac[5] += mac_inc;
++
++	if (!is_valid_ether_addr(mac))
++		return NULL;
++
++	addr = of_get_mac_addr(np, "mac-address");
++	if (addr) {
++		memcpy(addr, mac, ETH_ALEN);
++		return addr;
++	}
++
++	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
++	if (!prop)
++		return NULL;
++
++	prop->name = "mac-address";
++	prop->length = ETH_ALEN;
++	prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL);
++	if (!prop->value || of_add_property(np, prop))
++		goto free;
++
++	return prop->value;
++free:
++	kfree(prop->value);
++	kfree(prop);
++#endif
++	return NULL;
++}
++
+ /**
+  * Search the device tree for the best MAC address to use.  'mac-address' is
+  * checked first, because that is supposed to contain to "most recent" MAC
+@@ -64,11 +132,18 @@ static const void *of_get_mac_addr(struc
+  * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
+  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+  * but is all zeros.
++ *
++ * If a mtd-mac-address property exists, try to fetch the MAC address from the
++ * specified mtd device, and store it as a 'mac-address' property
+ */
+ const void *of_get_mac_address(struct device_node *np)
+ {
+ 	const void *addr;
+ 
++	addr = of_get_mac_address_mtd(np);
++	if (addr)
++		return addr;
++
+ 	addr = of_get_mac_addr(np, "mac-address");
+ 	if (addr)
+ 		return addr;
diff --git a/target/linux/generic/pending-4.14/701-phy_extension.patch b/target/linux/generic/pending-4.14/701-phy_extension.patch
new file mode 100644
index 0000000000..1b380e24a9
--- /dev/null
+++ b/target/linux/generic/pending-4.14/701-phy_extension.patch
@@ -0,0 +1,95 @@
+From: John Crispin <john@phrozen.org>
+Subject: net: phy: add phy_ethtool_ioctl()
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/net/phy/phy.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
+ include/linux/phy.h   |  1 +
+ 2 files changed, 45 insertions(+)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -382,6 +382,73 @@ void phy_ethtool_ksettings_get(struct ph
+ }
+ EXPORT_SYMBOL(phy_ethtool_ksettings_get);
+ 
++static int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
++{
++	cmd->supported = phydev->supported;
++
++	cmd->advertising = phydev->advertising;
++	cmd->lp_advertising = phydev->lp_advertising;
++
++	ethtool_cmd_speed_set(cmd, phydev->speed);
++	cmd->duplex = phydev->duplex;
++	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
++		cmd->port = PORT_BNC;
++	else
++		cmd->port = PORT_MII;
++	cmd->phy_address = phydev->mdio.addr;
++	cmd->transceiver = phy_is_internal(phydev) ?
++		XCVR_INTERNAL : XCVR_EXTERNAL;
++	cmd->autoneg = phydev->autoneg;
++	cmd->eth_tp_mdix_ctrl = phydev->mdix_ctrl;
++	cmd->eth_tp_mdix = phydev->mdix;
++
++	return 0;
++}
++
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -905,6 +905,7 @@ void phy_ethtool_ksettings_get(struct ph
+ 			       struct ethtool_link_ksettings *cmd);
+ int phy_ethtool_ksettings_set(struct phy_device *phydev,
+ 			      const struct ethtool_link_ksettings *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
+ void phy_print_status(struct phy_device *phydev);
diff --git a/target/linux/generic/pending-4.14/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-4.14/703-phy-add-detach-callback-to-struct-phy_driver.patch
new file mode 100644
index 0000000000..3d5f8fc5ed
--- /dev/null
+++ b/target/linux/generic/pending-4.14/703-phy-add-detach-callback-to-struct-phy_driver.patch
@@ -0,0 +1,38 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: generic: add detach callback to struct phy_driver
+
+lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/phy/phy_device.c | 3 +++
+ include/linux/phy.h          | 6 ++++++
+ 2 files changed, 9 insertions(+)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1095,6 +1095,9 @@ void phy_detach(struct phy_device *phyde
+ 	struct module *ndev_owner = dev->dev.parent->driver->owner;
+ 	struct mii_bus *bus;
+ 
++	if (phydev->drv && phydev->drv->detach)
++		phydev->drv->detach(phydev);
++
+ 	if (phydev->sysfs_links) {
+ 		sysfs_remove_link(&dev->dev.kobj, "phydev");
+ 		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -559,6 +559,12 @@ struct phy_driver {
+ 	 */
+ 	int (*did_interrupt)(struct phy_device *phydev);
+ 
++	/*
++	 * Called before an ethernet device is detached
++	 * from the PHY.
++	 */
++	void (*detach)(struct phy_device *phydev);
++
+ 	/* Clears up any memory if needed */
+ 	void (*remove)(struct phy_device *phydev);
+ 
diff --git a/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
new file mode 100644
index 0000000000..19dea170c3
--- /dev/null
+++ b/target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch
@@ -0,0 +1,142 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: net: phy: allow to configure AR803x PHYs via platform data
+
+Add a patch for the at803x phy driver, in order to be able
+to configure some register settings via platform data.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
+ include/linux/platform_data/phy-at803x.h | 11 +++++++
+ 2 files changed, 67 insertions(+)
+ create mode 100644 include/linux/platform_data/phy-at803x.h
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -12,12 +12,14 @@
+  */
+ 
+ #include <linux/phy.h>
++#include <linux/mdio.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/of_gpio.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/platform_data/phy-at803x.h>
+ 
+ #define AT803X_INTR_ENABLE			0x12
+ #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
+@@ -45,6 +47,11 @@
+ #define AT803X_REG_CHIP_CONFIG			0x1f
+ #define AT803X_BT_BX_REG_SEL			0x8000
+ 
++#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
++#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
++
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
+ 
+@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
+ struct at803x_priv {
+ 	bool phy_reset:1;
+ 	struct gpio_desc *gpiod_reset;
++	int prev_speed;
+ };
+ 
+ struct at803x_context {
+@@ -277,8 +285,16 @@ does_not_require_reset_workaround:
+ 	return 0;
+ }
+ 
++static void at803x_disable_smarteee(struct phy_device *phydev)
++{
++	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
++		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
++	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
++}
++
+ static int at803x_config_init(struct phy_device *phydev)
+ {
++	struct at803x_platform_data *pdata;
+ 	int ret;
+ 
+ 	ret = genphy_config_init(phydev);
+@@ -299,6 +315,26 @@ static int at803x_config_init(struct phy
+ 			return ret;
+ 	}
+ 
++	pdata = dev_get_platdata(&phydev->mdio.dev);
++	if (pdata) {
++		if (pdata->disable_smarteee)
++			at803x_disable_smarteee(phydev);
++
++		if (pdata->enable_rgmii_rx_delay)
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
++				AT803X_DEBUG_RX_CLK_DLY_EN);
++		else
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
++				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
++
++		if (pdata->enable_rgmii_tx_delay)
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
++				AT803X_DEBUG_TX_CLK_DLY_EN);
++		else
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
++				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
++	}
++
+ 	return 0;
+ }
+ 
+@@ -336,6 +372,8 @@ static int at803x_config_intr(struct phy
+ static void at803x_link_change_notify(struct phy_device *phydev)
+ {
+ 	struct at803x_priv *priv = phydev->priv;
++	struct at803x_platform_data *pdata;
++	pdata = dev_get_platdata(&phydev->mdio.dev);
+ 
+ 	/*
+ 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
+@@ -364,6 +402,24 @@ static void at803x_link_change_notify(st
+ 	} else {
+ 		priv->phy_reset = false;
+ 	}
++	if (pdata && pdata->fixup_rgmii_tx_delay &&
++	    phydev->speed != priv->prev_speed) {
++		switch (phydev->speed) {
++		case SPEED_10:
++		case SPEED_100:
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
++				AT803X_DEBUG_TX_CLK_DLY_EN);
++			break;
++		case SPEED_1000:
++			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
++				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
++			break;
++		default:
++			break;
++		}
++
++		priv->prev_speed = phydev->speed;
++	}
+ }
+ 
+ static int at803x_aneg_done(struct phy_device *phydev)
+--- /dev/null
++++ b/include/linux/platform_data/phy-at803x.h
+@@ -0,0 +1,11 @@
++#ifndef _PHY_AT803X_PDATA_H
++#define _PHY_AT803X_PDATA_H
++
++struct at803x_platform_data {
++	int disable_smarteee:1;
++	int enable_rgmii_tx_delay:1;
++	int enable_rgmii_rx_delay:1;
++	int fixup_rgmii_tx_delay:1;
++};
++
++#endif /* _PHY_AT803X_PDATA_H */
diff --git a/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644
index 0000000000..3c686623b9
--- /dev/null
+++ b/target/linux/generic/pending-4.14/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
@@ -0,0 +1,54 @@
+From: Roman Yeryomin <roman@advem.lv>
+Subject: kernel: add at803x fix for sgmii mode
+
+Some (possibly broken) bootloaders incorreclty initialize at8033
+phy. This patch enables sgmii autonegotiation mode.
+
+[john@phrozen.org: felix added this to his upstream queue]
+
+Signed-off-by: Roman Yeryomin <roman@advem.lv>
+---
+ drivers/net/phy/at803x.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -55,6 +55,10 @@
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
+ 
++#define AT803X_REG_CHIP_CONFIG			0x1f
++#define AT803X_BT_BX_REG_SEL			0x8000
++#define AT803X_SGMII_ANEG_EN			0x1000
++
+ #define AT803X_MODE_CFG_MASK			0x0F
+ #define AT803X_MODE_CFG_SGMII			0x01
+ 
+@@ -296,6 +300,27 @@ static int at803x_config_init(struct phy
+ {
+ 	struct at803x_platform_data *pdata;
+ 	int ret;
++	u32 v;
++
++	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++		phydev->interface == PHY_INTERFACE_MODE_SGMII)
++	{
++		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++		/* select SGMII/fiber page */
++		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++						v & ~AT803X_BT_BX_REG_SEL);
++		if (ret)
++			return ret;
++		/* enable SGMII autonegotiation */
++		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++		if (ret)
++			return ret;
++		/* select copper page */
++		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++						v | AT803X_BT_BX_REG_SEL);
++		if (ret)
++			return ret;
++	}
+ 
+ 	ret = genphy_config_init(phydev);
+ 	if (ret < 0)
diff --git a/target/linux/generic/pending-4.14/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.14/810-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..2a5bcc8ef1
--- /dev/null
+++ b/target/linux/generic/pending-4.14/810-pci_disable_common_quirks.patch
@@ -0,0 +1,60 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: debloat: add kernel config option to disabling common PCI quirks
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/pci/Kconfig  | 6 ++++++
+ drivers/pci/quirks.c | 6 ++++++
+ 2 files changed, 12 insertions(+)
+
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -71,6 +71,12 @@ config XEN_PCIDEV_FRONTEND
+           The PCI device frontend driver allows the kernel to import arbitrary
+           PCI devices from a PCI backend to support PCI driver domains.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -43,6 +43,7 @@ static void quirk_mmio_always_on(struct
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -3077,6 +3078,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+ 
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ /*
+  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.  To
+@@ -3133,6 +3135,8 @@ static void fixup_debug_report(struct pc
+ 	}
+ }
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ /*
+  * Some BIOS implementations leave the Intel GPU interrupts enabled,
+  * even though no one is handling them (f.e. i915 driver is never loaded).
+@@ -3167,6 +3171,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
+ 
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
+ /*
+  * PCI devices which are on Intel chips can skip the 10ms delay
+  * before entering D3 mode.
diff --git a/target/linux/generic/pending-4.14/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-4.14/811-pci_disable_usb_common_quirks.patch
new file mode 100644
index 0000000000..005c25d048
--- /dev/null
+++ b/target/linux/generic/pending-4.14/811-pci_disable_usb_common_quirks.patch
@@ -0,0 +1,113 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: debloat: disable common USB quirks
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
+ drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
+ include/linux/usb/hcd.h       |  7 +++++++
+ 3 files changed, 40 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -107,6 +107,8 @@ struct amd_chipset_type {
+ 	u8 rev;
+ };
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static struct amd_chipset_info {
+ 	struct pci_dev	*nb_dev;
+ 	struct pci_dev	*smbus_dev;
+@@ -511,6 +513,10 @@ void usb_amd_dev_put(void)
+ }
+ EXPORT_SYMBOL_GPL(usb_amd_dev_put);
+ 
++#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
++#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
++
+ /*
+  * Make sure the controller is completely inactive, unable to
+  * generate interrupts or do DMA.
+@@ -590,8 +596,17 @@ reset_needed:
+ 	uhci_reset_hc(pdev, base);
+ 	return 1;
+ }
++#else
++int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
++{
++	return 0;
++}
++
++#endif
+ EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+ {
+ 	u16 cmd;
+@@ -1158,6 +1173,7 @@ static void quirk_usb_early_handoff(stru
+ }
+ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
++#endif
+ 
+ bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
+ {
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
+@@ -5,6 +5,9 @@
+ #ifdef CONFIG_USB_PCI
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
++#endif  /* CONFIG_USB_PCI */
++
++#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
+ int usb_amd_find_chipset_info(void);
+ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+ bool usb_amd_hang_symptom_quirk(void);
+@@ -19,12 +22,25 @@ void sb800_prefetch(struct device *dev,
+ bool usb_xhci_needs_pci_reset(struct pci_dev *pdev);
+ #else
+ struct pci_dev;
++static inline int usb_amd_find_chipset_info(void)
++{
++	return 0;
++}
++static inline bool usb_amd_hang_symptom_quirk(void)
++{
++	return false;
++}
++static inline bool usb_amd_prefetch_quirk(void)
++{
++	return false;
++}
+ static inline void usb_amd_quirk_pll_disable(void) {}
+ static inline void usb_amd_quirk_pll_enable(void) {}
+ static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+ static inline void usb_amd_dev_put(void) {}
+ static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
+ static inline void sb800_prefetch(struct device *dev, int on) {}
++static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
+ #endif  /* CONFIG_USB_PCI */
+ 
+ #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
+--- a/include/linux/usb/hcd.h
++++ b/include/linux/usb/hcd.h
+@@ -465,7 +465,14 @@ extern int usb_hcd_pci_probe(struct pci_
+ extern void usb_hcd_pci_remove(struct pci_dev *dev);
+ extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
++#else
++static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
++{
++	return 0;
++}
++#endif
+ 
+ #ifdef CONFIG_PM
+ extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch b/target/linux/generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch
new file mode 100644
index 0000000000..c14e679590
--- /dev/null
+++ b/target/linux/generic/pending-4.14/821-usb-Remove-annoying-warning-about-bogus-URB.patch
@@ -0,0 +1,76 @@
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Subject: usb: Remove annoying warning about bogus URB
+
+When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
+infinite stream of warnings appears in debug console like this:
+-------------------------->8----------------------
+usb 1-1: new full-speed USB device number 2 using ohci-platform
+usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
+usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
+51008
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
+usb_submit_urb+0x1b4/0x498()
+usb 1-1: BOGUS urb xfer, pipe 1 != type 3
+Modules linked in:
+CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
+4.4.0-rc4-00017-g00e2d79-dirty #3
+Workqueue: events request_firmware_work_func
+
+Stack Trace:
+  arc_unwind_core.constprop.1+0xa4/0x110
+---[ end trace 649ef8c342817fc2 ]---
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
+usb_submit_urb+0x1b4/0x498()
+usb 1-1: BOGUS urb xfer, pipe 1 != type 3
+Modules linked in:
+CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G        W
+4.4.0-rc4-00017-g00e2d79-dirty #3
+Workqueue: events request_firmware_work_func
+
+Stack Trace:
+  arc_unwind_core.constprop.1+0xa4/0x110
+---[ end trace 649ef8c342817fc3 ]---
+------------[ cut here ]------------
+-------------------------->8----------------------
+
+There're some discussions in mailing lists proposing to disable
+that particular check alltogether and magically all seem to work
+fine with muted warning.
+
+Anyways new thread on that regard could be found here:
+http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
+
+Let's see what comes out of that new discussion, hopefully patching
+of generic USB stuff won't be required then.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ drivers/usb/core/urb.c | 5 -----
+ 1 file changed, 5 deletions(-)
+
+--- a/drivers/usb/core/urb.c
++++ b/drivers/usb/core/urb.c
+@@ -326,9 +326,6 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
+  */
+ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
+ {
+-	static int			pipetypes[4] = {
+-		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+-	};
+ 	int				xfertype, max;
+ 	struct usb_device		*dev;
+ 	struct usb_host_endpoint	*ep;
+@@ -443,11 +440,6 @@ int usb_submit_urb(struct urb *urb, gfp_
+ 	 * cause problems in HCDs if they get it wrong.
+ 	 */
+ 
+-	/* Check that the pipe's type matches the endpoint's type */
+-	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+-		dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
+-			usb_pipetype(urb->pipe), pipetypes[xfertype]);
+-
+ 	/* Check against a simple/standard policy */
+ 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
+ 			URB_FREE_BUFFER);
diff --git a/target/linux/generic/pending-4.14/831-ledtrig_netdev.patch b/target/linux/generic/pending-4.14/831-ledtrig_netdev.patch
new file mode 100644
index 0000000000..a12e6dba96
--- /dev/null
+++ b/target/linux/generic/pending-4.14/831-ledtrig_netdev.patch
@@ -0,0 +1,74 @@
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Subject: usb: Remove annoying warning about bogus URB
+
+When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
+infinite stream of warnings appears in debug console like this:
+-------------------------->8----------------------
+usb 1-1: new full-speed USB device number 2 using ohci-platform
+usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
+usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
+51008
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
+usb_submit_urb+0x1b4/0x498()
+usb 1-1: BOGUS urb xfer, pipe 1 != type 3
+Modules linked in:
+CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
+4.4.0-rc4-00017-g00e2d79-dirty #3
+Workqueue: events request_firmware_work_func
+
+Stack Trace:
+arc_unwind_core.constprop.1+0xa4/0x110
+---[ end trace 649ef8c342817fc2 ]---
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
+usb_submit_urb+0x1b4/0x498()
+usb 1-1: BOGUS urb xfer, pipe 1 != type 3
+Modules linked in:
+CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G        W
+4.4.0-rc4-00017-g00e2d79-dirty #3
+Workqueue: events request_firmware_work_func
+
+Stack Trace:
+arc_unwind_core.constprop.1+0xa4/0x110
+---[ end trace 649ef8c342817fc3 ]---
+------------[ cut here ]------------
+-------------------------->8----------------------
+
+There're some discussions in mailing lists proposing to disable
+that particular check alltogether and magically all seem to work
+fine with muted warning.
+
+Anyways new thread on that regard could be found here:
+http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
+
+Let's see what comes out of that new discussion, hopefully patching
+of generic USB stuff won't be required then.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ drivers/leds/Makefile        | 1 +
+ drivers/leds/trigger/Kconfig | 7 +++++++
+ 2 files changed, 8 insertions(+)
+
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -82,3 +82,4 @@ obj-$(CONFIG_LEDS_USER)			+= uleds.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+--- a/drivers/leds/trigger/Kconfig
++++ b/drivers/leds/trigger/Kconfig
+@@ -126,4 +126,11 @@ config LEDS_TRIGGER_PANIC
+ 	  a different trigger.
+ 	  If unsure, say Y.
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # LEDS_TRIGGERS
diff --git a/target/linux/generic/pending-4.14/834-ledtrig-libata.patch b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch
new file mode 100644
index 0000000000..8597a936f5
--- /dev/null
+++ b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch
@@ -0,0 +1,149 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: libata: add ledtrig support
+
+This adds a LED trigger for each ATA port indicating disk activity.
+
+As this is needed only on specific platforms (NAS SoCs and such),
+these platforms should define ARCH_WANTS_LIBATA_LEDS if there
+are boards with LED(s) intended to indicate ATA disk activity and
+need the OS to take care of that.
+In that way, if not selected, LED trigger support not will be
+included in libata-core and both, codepaths and structures remain
+untouched.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/ata/Kconfig       | 16 ++++++++++++++++
+ drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
+ include/linux/libata.h    |  9 +++++++++
+ 3 files changed, 66 insertions(+)
+
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
+ 
+ 	  If unsure, say Y.
+ 
++config ARCH_WANT_LIBATA_LEDS
++	bool
++
++config ATA_LEDS
++	bool "support ATA port LED triggers"
++	depends on ARCH_WANT_LIBATA_LEDS
++	select NEW_LEDS
++	select LEDS_CLASS
++	select LEDS_TRIGGERS
++	default y
++	help
++	  This option adds a LED trigger for each registered ATA port.
++	  It is used to drive disk activity leds connected via GPIO.
++
++	  If unsure, say N.
++
+ config ATA_ACPI
+ 	bool "ATA ACPI Support"
+ 	depends on ACPI
+--- a/drivers/ata/libata-core.c
++++ b/drivers/ata/libata-core.c
+@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
+ 	return block;
+ }
+ 
++#ifdef CONFIG_ATA_LEDS
++#define LIBATA_BLINK_DELAY 20 /* ms */
++static inline void ata_led_act(struct ata_port *ap)
++{
++	unsigned long led_delay = LIBATA_BLINK_DELAY;
++
++	if (unlikely(!ap->ledtrig))
++		return;
++
++	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
++}
++#endif
++
+ /**
+  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
+  *	@tf: Target ATA taskfile
+@@ -5089,6 +5102,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+ 		if (tag < 0)
+ 			return NULL;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	ata_led_act(ap);
++#endif
+ 
+ 	qc = __ata_qc_from_tag(ap, tag);
+ 	qc->tag = tag;
+@@ -5991,6 +6007,9 @@ struct ata_port *ata_port_alloc(struct a
+ 	ap->stats.unhandled_irq = 1;
+ 	ap->stats.idle_irq = 1;
+ #endif
++#ifdef CONFIG_ATA_LEDS
++	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
++#endif
+ 	ata_sff_port_init(ap);
+ 
+ 	return ap;
+@@ -6012,6 +6031,12 @@ static void ata_host_release(struct devi
+ 
+ 		kfree(ap->pmp_link);
+ 		kfree(ap->slave_link);
++#ifdef CONFIG_ATA_LEDS
++		if (ap->ledtrig) {
++			led_trigger_unregister(ap->ledtrig);
++			kfree(ap->ledtrig);
++		};
++#endif
+ 		kfree(ap);
+ 		host->ports[i] = NULL;
+ 	}
+@@ -6458,7 +6483,23 @@ int ata_host_register(struct ata_host *h
+ 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
+ 		host->ports[i]->local_port_no = i + 1;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	for (i = 0; i < host->n_ports; i++) {
++		if (unlikely(!host->ports[i]->ledtrig))
++			continue;
+ 
++		snprintf(host->ports[i]->ledtrig_name,
++			sizeof(host->ports[i]->ledtrig_name), "ata%u",
++			host->ports[i]->print_id);
++
++		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
++
++		if (led_trigger_register(host->ports[i]->ledtrig)) {
++			kfree(host->ports[i]->ledtrig);
++			host->ports[i]->ledtrig = NULL;
++		}
++	}
++#endif
+ 	/* Create associated sysfs transport objects  */
+ 	for (i = 0; i < host->n_ports; i++) {
+ 		rc = ata_tport_add(host->dev,host->ports[i]);
+--- a/include/linux/libata.h
++++ b/include/linux/libata.h
+@@ -38,6 +38,9 @@
+ #include <linux/acpi.h>
+ #include <linux/cdrom.h>
+ #include <linux/sched.h>
++#ifdef CONFIG_ATA_LEDS
++#include <linux/leds.h>
++#endif
+ 
+ /*
+  * Define if arch has non-standard setup.  This is a _PCI_ standard
+@@ -889,6 +892,12 @@ struct ata_port {
+ #ifdef CONFIG_ATA_ACPI
+ 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
+ #endif
++
++#ifdef CONFIG_ATA_LEDS
++	struct led_trigger	*ledtrig;
++	char			ledtrig_name[8];
++#endif
++
+ 	/* owned by EH */
+ 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
+ };
diff --git a/target/linux/generic/pending-4.14/920-mangle_bootargs.patch b/target/linux/generic/pending-4.14/920-mangle_bootargs.patch
new file mode 100644
index 0000000000..be89441d30
--- /dev/null
+++ b/target/linux/generic/pending-4.14/920-mangle_bootargs.patch
@@ -0,0 +1,71 @@
+From: Imre Kaloz <kaloz@openwrt.org>
+Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
+
+Enabling this option renames the bootloader supplied root=
+and rootfstype= variables, which might have to be know but
+would break the automatisms OpenWrt uses.
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ init/Kconfig |  9 +++++++++
+ init/main.c  | 24 ++++++++++++++++++++++++
+ 2 files changed, 33 insertions(+)
+
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1420,6 +1420,15 @@ config EMBEDDED
+ 	  an embedded system so certain expert options are available
+ 	  for configuration.
+ 
++config MANGLE_BOOTARGS
++	bool "Rename offending bootargs"
++	depends on EXPERT
++	help
++	  Sometimes the bootloader passed bogus root= and rootfstype=
++	  parameters to the kernel, and while you want to ignore them,
++	  you need to know the values f.e. to support dual firmware
++	  layouts on the flash.
++
+ config HAVE_PERF_EVENTS
+ 	bool
+ 	help
+--- a/init/main.c
++++ b/init/main.c
+@@ -359,6 +359,29 @@ static inline void setup_nr_cpu_ids(void
+ static inline void smp_prepare_cpus(unsigned int maxcpus) { }
+ #endif
+ 
++#ifdef CONFIG_MANGLE_BOOTARGS
++static void __init mangle_bootargs(char *command_line)
++{
++	char *rootdev;
++	char *rootfs;
++
++	rootdev = strstr(command_line, "root=/dev/mtdblock");
++
++	if (rootdev)
++		strncpy(rootdev, "mangled_rootblock=", 18);
++
++	rootfs = strstr(command_line, "rootfstype");
++
++	if (rootfs)
++		strncpy(rootfs, "mangled_fs", 10);
++
++}
++#else
++static void __init mangle_bootargs(char *command_line)
++{
++}
++#endif
++
+ /*
+  * We need to store the untouched command line for future reference.
+  * We also need to store the touched command line since the parameter
+@@ -536,6 +559,7 @@ asmlinkage __visible void __init start_k
+ 	add_device_randomness(command_line, strlen(command_line));
+ 	boot_init_stack_canary();
+ 	mm_init_cpumask(&init_mm);
++	mangle_bootargs(command_line);
+ 	setup_command_line(command_line);
+ 	setup_nr_cpu_ids();
+ 	setup_per_cpu_areas();