kernel: Remove support for kernel 3.18

No target is using kernel 3.18 anymore, remove all the generic
support for kernel 3.18.

The removed packages are depending on kernel 3.18 only and are not used on
any recent kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 134 deletions

diff --git a/target/linux/generic/pending-3.18/020-ssb_update.patch b/target/linux/generic/pending-3.18/020-ssb_update.patch
deleted file mode 100644
index f94d160fc6..0000000000
--- a/target/linux/generic/pending-3.18/020-ssb_update.patch
+++ /dev/null
@@ -1,134 +0,0 @@
---- a/drivers/ssb/pcihost_wrapper.c
-+++ b/drivers/ssb/pcihost_wrapper.c
-@@ -11,15 +11,17 @@
-  * Licensed under the GNU/GPL. See COPYING for details.
-  */
- 
-+#include <linux/pm.h>
- #include <linux/pci.h>
- #include <linux/export.h>
- #include <linux/slab.h>
- #include <linux/ssb/ssb.h>
- 
- 
--#ifdef CONFIG_PM
--static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
-+#ifdef CONFIG_PM_SLEEP
-+static int ssb_pcihost_suspend(struct device *d)
- {
-+	struct pci_dev *dev = to_pci_dev(d);
- 	struct ssb_bus *ssb = pci_get_drvdata(dev);
- 	int err;
- 
-@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
- 		return err;
- 	pci_save_state(dev);
- 	pci_disable_device(dev);
--	pci_set_power_state(dev, pci_choose_state(dev, state));
-+
-+	/* if there is a wakeup enabled child device on ssb bus,
-+	   enable pci wakeup posibility. */
-+	device_set_wakeup_enable(d, d->power.wakeup_path);
-+
-+	pci_prepare_to_sleep(dev);
- 
- 	return 0;
- }
- 
--static int ssb_pcihost_resume(struct pci_dev *dev)
-+static int ssb_pcihost_resume(struct device *d)
- {
-+	struct pci_dev *dev = to_pci_dev(d);
- 	struct ssb_bus *ssb = pci_get_drvdata(dev);
- 	int err;
- 
--	pci_set_power_state(dev, PCI_D0);
-+	pci_back_from_sleep(dev);
- 	err = pci_enable_device(dev);
- 	if (err)
- 		return err;
-@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
- 
- 	return 0;
- }
--#else /* CONFIG_PM */
--# define ssb_pcihost_suspend	NULL
--# define ssb_pcihost_resume	NULL
--#endif /* CONFIG_PM */
-+
-+static const struct dev_pm_ops ssb_pcihost_pm_ops = {
-+	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
-+};
-+
-+#endif /* CONFIG_PM_SLEEP */
- 
- static int ssb_pcihost_probe(struct pci_dev *dev,
- 			     const struct pci_device_id *id)
-@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
- {
- 	driver->probe = ssb_pcihost_probe;
- 	driver->remove = ssb_pcihost_remove;
--	driver->suspend = ssb_pcihost_suspend;
--	driver->resume = ssb_pcihost_resume;
-+#ifdef CONFIG_PM_SLEEP
-+	driver->driver.pm = &ssb_pcihost_pm_ops;
-+#endif
- 
- 	return pci_register_driver(driver);
- }
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -357,6 +357,16 @@ static void ssb_pcicore_init_hostmode(st
- 	pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
- 			SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
- 
-+	/*
-+	 * Accessing PCI config without a proper delay after devices reset (not
-+	 * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704).
-+	 * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
-+	 * completely. Flushing all writes was also tested but with no luck.
-+	 * The same problem was reported for WRT350N v1 (BCM4705), so we just
-+	 * sleep here unconditionally.
-+	 */
-+	usleep_range(1000, 2000);
-+
- 	/* Enable PCI bridge BAR0 prefetch and burst */
- 	val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- 	ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -90,25 +90,6 @@ found:
- }
- #endif /* CONFIG_SSB_PCMCIAHOST */
- 
--#ifdef CONFIG_SSB_SDIOHOST
--struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
--{
--	struct ssb_bus *bus;
--
--	ssb_buses_lock();
--	list_for_each_entry(bus, &buses, list) {
--		if (bus->bustype == SSB_BUSTYPE_SDIO &&
--		    bus->host_sdio == func)
--			goto found;
--	}
--	bus = NULL;
--found:
--	ssb_buses_unlock();
--
--	return bus;
--}
--#endif /* CONFIG_SSB_SDIOHOST */
--
- int ssb_for_each_bus_call(unsigned long data,
- 			  int (*func)(struct ssb_bus *bus, unsigned long data))
- {
-@@ -1154,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
- 	case SSB_IDLOW_SSBREV_25:     /* TODO - find the proper REJECT bit */
- 	case SSB_IDLOW_SSBREV_27:     /* same here */
- 		return SSB_TMSLOW_REJECT;	/* this is a guess */
-+	case SSB_IDLOW_SSBREV:
-+		break;
- 	default:
- 		WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
- 	}