kernel: update linux 3.8 to 3.8.9

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453

1 files changed, 2 insertions, 66 deletions

diff --git a/target/linux/generic/patches-3.8/020-ssb_update.patch b/target/linux/generic/patches-3.8/020-ssb_update.patch
index d3cc6f1595..e4d699370d 100644
--- a/target/linux/generic/patches-3.8/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.8/020-ssb_update.patch
@@ -167,7 +167,7 @@
 +}
 --- a/drivers/ssb/driver_gpio.c
 +++ b/drivers/ssb/driver_gpio.c
-@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct 
+@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
  	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
  }
  
@@ -253,7 +253,7 @@
  
  static inline u32 mips_read32(struct ssb_mipscore *mcore,
  			      u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct 
+@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
  {
  	struct ssb_bus *bus = mcore->dev->bus;
@@ -363,53 +363,6 @@
  #endif /* CONFIG_SSB_DRIVER_MIPS */
  
  #endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/drivers/net/wireless/b43/phy_n.c
-+++ b/drivers/net/wireless/b43/phy_n.c
-@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
- #endif
- #ifdef CONFIG_B43_SSB
- 	case B43_BUS_SSB:
--		/* FIXME */
-+		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
-+					    avoid);
- 		break;
- #endif
- 	}
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
- 		return 0;
- 	}
- }
-+
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
-+{
-+	u32 pmu_ctl = 0;
-+
-+	switch (cc->dev->bus->chip_id) {
-+	case 0x4322:
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
-+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
-+		if (spuravoid == 1)
-+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
-+		else
-+			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
-+		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
-+		break;
-+	case 43222:
-+		/* TODO: BCM43222 requires updating PLLs too */
-+		return;
-+	default:
-+		ssb_printk(KERN_ERR PFX
-+			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
-+			   cc->dev->bus->chip_id);
-+		return;
-+	}
-+
-+	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
-+}
-+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
 @@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
@@ -453,23 +406,6 @@
  }
  
  /* Revs 4 5 and 8 have partially shared layout */
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -219,6 +219,7 @@
- #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
- #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
- #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
-+#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
- #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
- #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
- #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
-@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
- void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
- 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
- void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
- 
- #endif /* LINUX_SSB_CHIPCO_H_ */
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
 @@ -289,11 +289,11 @@