kernel: update bcma and ssb to master-2012-10-18 from wireless-testing

* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920

2 files changed, 1117 insertions, 0 deletions

diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch
new file mode 100644
index 0000000000..e61be82fe1
--- /dev/null
+++ b/target/linux/generic/patches-3.6/020-ssb_update.patch
@@ -0,0 +1,82 @@
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -190,16 +190,32 @@ static void ssb_mips_flash_detect(struct
+ {
+ 	struct ssb_bus *bus = mcore->dev->bus;
+ 
+-	mcore->flash_buswidth = 2;
+-	if (bus->chipco.dev) {
+-		mcore->flash_window = 0x1c000000;
+-		mcore->flash_window_size = 0x02000000;
++	/* When there is no chipcommon on the bus there is 4MB flash */
++	if (!bus->chipco.dev) {
++		mcore->pflash.present = true;
++		mcore->pflash.buswidth = 2;
++		mcore->pflash.window = SSB_FLASH1;
++		mcore->pflash.window_size = SSB_FLASH1_SZ;
++		return;
++	}
++
++	/* There is ChipCommon, so use it to read info about flash */
++	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++	case SSB_CHIPCO_FLASHT_ATSER:
++		pr_err("Serial flash not supported\n");
++		break;
++	case SSB_CHIPCO_FLASHT_PARA:
++		pr_debug("Found parallel flash\n");
++		mcore->pflash.present = true;
++		mcore->pflash.window = SSB_FLASH2;
++		mcore->pflash.window_size = SSB_FLASH2_SZ;
+ 		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+ 		               & SSB_CHIPCO_CFG_DS16) == 0)
+-			mcore->flash_buswidth = 1;
+-	} else {
+-		mcore->flash_window = 0x1fc00000;
+-		mcore->flash_window_size = 0x00400000;
++			mcore->pflash.buswidth = 1;
++		else
++			mcore->pflash.buswidth = 2;
++		break;
+ 	}
+ }
+ 
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -504,7 +504,9 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
+-#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
++#define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
++#define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
+ 
+ /* Status register bits for ST flashes */
+ #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -13,6 +13,12 @@ struct ssb_serial_port {
+ 	unsigned int reg_shift;
+ };
+ 
++struct ssb_pflash {
++	bool present;
++	u8 buswidth;
++	u32 window;
++	u32 window_size;
++};
+ 
+ struct ssb_mipscore {
+ 	struct ssb_device *dev;
+@@ -20,9 +26,7 @@ struct ssb_mipscore {
+ 	int nr_serial_ports;
+ 	struct ssb_serial_port serial_ports[4];
+ 
+-	u8 flash_buswidth;
+-	u32 flash_window;
+-	u32 flash_window_size;
++	struct ssb_pflash pflash;
+ };
+ 
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
diff --git a/target/linux/generic/patches-3.6/025-bcma_backport.patch b/target/linux/generic/patches-3.6/025-bcma_backport.patch
new file mode 100644
index 0000000000..d791f16a0f
--- /dev/null
+++ b/target/linux/generic/patches-3.6/025-bcma_backport.patch
@@ -0,0 +1,1035 @@
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -48,12 +48,12 @@ config BCMA_DRIVER_MIPS
+ 
+ config BCMA_SFLASH
+ 	bool
+-	depends on BCMA_DRIVER_MIPS && BROKEN
++	depends on BCMA_DRIVER_MIPS
+ 	default y
+ 
+ config BCMA_NFLASH
+ 	bool
+-	depends on BCMA_DRIVER_MIPS && BROKEN
++	depends on BCMA_DRIVER_MIPS
+ 	default y
+ 
+ config BCMA_DRIVER_GMAC_CMN
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -54,6 +54,7 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+ #ifdef CONFIG_BCMA_SFLASH
+ /* driver_chipcommon_sflash.c */
+ int bcma_sflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_sflash_dev;
+ #else
+ static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+@@ -65,6 +66,7 @@ static inline int bcma_sflash_init(struc
+ #ifdef CONFIG_BCMA_NFLASH
+ /* driver_chipcommon_nflash.c */
+ int bcma_nflash_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_nflash_dev;
+ #else
+ static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
+ {
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -65,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
+ 	switch (clkmode) {
+ 	case BCMA_CLKMODE_FAST:
+ 		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+-		udelay(64);
++		usleep_range(64, 300);
+ 		for (i = 0; i < 1500; i++) {
+ 			if (bcma_read32(core, BCMA_CLKCTLST) &
+ 			    BCMA_CLKCTLST_HAVEHT) {
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -22,12 +22,9 @@ static inline u32 bcma_cc_write32_masked
+ 	return value;
+ }
+ 
+-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
+ {
+-	u32 leddc_on = 10;
+-	u32 leddc_off = 90;
+-
+-	if (cc->setup_done)
++	if (cc->early_setup_done)
+ 		return;
+ 
+ 	if (cc->core->id.rev >= 11)
+@@ -36,6 +33,22 @@ void bcma_core_chipcommon_init(struct bc
+ 	if (cc->core->id.rev >= 35)
+ 		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+ 
++	if (cc->capabilities & BCMA_CC_CAP_PMU)
++		bcma_pmu_early_init(cc);
++
++	cc->early_setup_done = true;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++	u32 leddc_on = 10;
++	u32 leddc_off = 90;
++
++	if (cc->setup_done)
++		return;
++
++	bcma_core_chipcommon_early_init(cc);
++
+ 	if (cc->core->id.rev >= 20) {
+ 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+ 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+--- a/drivers/bcma/driver_chipcommon_nflash.c
++++ b/drivers/bcma/driver_chipcommon_nflash.c
+@@ -5,15 +5,40 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+-#include <linux/bcma/bcma_driver_chipcommon.h>
+-#include <linux/delay.h>
+ 
+ #include "bcma_private.h"
+ 
++struct platform_device bcma_nflash_dev = {
++	.name		= "bcma_nflash",
++	.num_resources	= 0,
++};
++
+ /* Initialize NAND flash access */
+ int bcma_nflash_init(struct bcma_drv_cc *cc)
+ {
+-	bcma_err(cc->core->bus, "NAND flash support is broken\n");
++	struct bcma_bus *bus = cc->core->bus;
++
++	if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
++	    cc->core->id.rev != 0x38) {
++		bcma_err(bus, "NAND flash on unsupported board!\n");
++		return -ENOTSUPP;
++	}
++
++	if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) {
++		bcma_err(bus, "NAND flash not present according to ChipCommon\n");
++		return -ENODEV;
++	}
++
++	cc->nflash.present = true;
++	if (cc->core->id.rev == 38 &&
++	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
++		cc->nflash.boot = true;
++
++	/* Prepare platform device, but don't register it yet. It's too early,
++	 * malloc (required by device_private_init) is not available yet. */
++	bcma_nflash_dev.dev.platform_data = &cc->nflash;
++
+ 	return 0;
+ }
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -76,7 +76,10 @@ static void bcma_pmu_resources_init(stru
+ 	if (max_msk)
+ 		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+ 
+-	/* Add some delay; allow resources to come up and settle. */
++	/*
++	 * Add some delay; allow resources to come up and settle.
++	 * Delay is required for SoC (early init).
++	 */
+ 	mdelay(2);
+ }
+ 
+@@ -101,7 +104,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+ }
+ 
+-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+@@ -141,7 +144,7 @@ void bcma_pmu_workarounds(struct bcma_dr
+ 	}
+ }
+ 
+-void bcma_pmu_init(struct bcma_drv_cc *cc)
++void bcma_pmu_early_init(struct bcma_drv_cc *cc)
+ {
+ 	u32 pmucap;
+ 
+@@ -150,7 +153,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ 
+ 	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
+ 		   cc->pmu.rev, pmucap);
++}
+ 
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
+ 	if (cc->pmu.rev == 1)
+ 		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+ 			      ~BCMA_CC_PMU_CTL_NOILPONW);
+@@ -257,7 +263,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
+ }
+ 
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++static u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -5,15 +5,161 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+-#include <linux/bcma/bcma_driver_chipcommon.h>
+-#include <linux/delay.h>
+ 
+ #include "bcma_private.h"
+ 
++static struct resource bcma_sflash_resource = {
++	.name	= "bcma_sflash",
++	.start	= BCMA_SOC_FLASH2,
++	.end	= 0,
++	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device bcma_sflash_dev = {
++	.name		= "bcma_sflash",
++	.resource	= &bcma_sflash_resource,
++	.num_resources	= 1,
++};
++
++struct bcma_sflash_tbl_e {
++	char *name;
++	u32 id;
++	u32 blocksize;
++	u16 numblocks;
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++	{ "M25P20", 0x11, 0x10000, 4, },
++	{ "M25P40", 0x12, 0x10000, 8, },
++
++	{ "M25P16", 0x14, 0x10000, 32, },
++	{ "M25P32", 0x14, 0x10000, 64, },
++	{ "M25P64", 0x16, 0x10000, 128, },
++	{ "M25FL128", 0x17, 0x10000, 256, },
++	{ 0 },
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++	{ "SST25WF512", 1, 0x1000, 16, },
++	{ "SST25VF512", 0x48, 0x1000, 16, },
++	{ "SST25WF010", 2, 0x1000, 32, },
++	{ "SST25VF010", 0x49, 0x1000, 32, },
++	{ "SST25WF020", 3, 0x1000, 64, },
++	{ "SST25VF020", 0x43, 0x1000, 64, },
++	{ "SST25WF040", 4, 0x1000, 128, },
++	{ "SST25VF040", 0x44, 0x1000, 128, },
++	{ "SST25VF040B", 0x8d, 0x1000, 128, },
++	{ "SST25WF080", 5, 0x1000, 256, },
++	{ "SST25VF080B", 0x8e, 0x1000, 256, },
++	{ "SST25VF016", 0x41, 0x1000, 512, },
++	{ "SST25VF032", 0x4a, 0x1000, 1024, },
++	{ "SST25VF064", 0x4b, 0x1000, 2048, },
++	{ 0 },
++};
++
++static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++	{ "AT45DB011", 0xc, 256, 512, },
++	{ "AT45DB021", 0x14, 256, 1024, },
++	{ "AT45DB041", 0x1c, 256, 2048, },
++	{ "AT45DB081", 0x24, 256, 4096, },
++	{ "AT45DB161", 0x2c, 512, 4096, },
++	{ "AT45DB321", 0x34, 512, 8192, },
++	{ "AT45DB642", 0x3c, 1024, 8192, },
++	{ 0 },
++};
++
++static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
++{
++	int i;
++	bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
++			BCMA_CC_FLASHCTL_START | opcode);
++	for (i = 0; i < 1000; i++) {
++		if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
++		      BCMA_CC_FLASHCTL_BUSY))
++			return;
++		cpu_relax();
++	}
++	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
++}
++
+ /* Initialize serial flash access */
+ int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+-	bcma_err(cc->core->bus, "Serial flash support is broken\n");
++	struct bcma_bus *bus = cc->core->bus;
++	struct bcma_sflash *sflash = &cc->sflash;
++	struct bcma_sflash_tbl_e *e;
++	u32 id, id2;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
++
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
++		id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
++
++		switch (id) {
++		case 0xbf:
++			for (e = bcma_sflash_sst_tbl; e->name; e++) {
++				if (e->id == id2)
++					break;
++			}
++			break;
++		case 0x13:
++			return -ENOTSUPP;
++		default:
++			for (e = bcma_sflash_st_tbl; e->name; e++) {
++				if (e->id == id)
++					break;
++			}
++			break;
++		}
++		if (!e->name) {
++			bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
++			return -ENOTSUPP;
++		}
++
++		break;
++	case BCMA_CC_FLASHT_ATSER:
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
++
++		for (e = bcma_sflash_at_tbl; e->name; e++) {
++			if (e->id == id)
++				break;
++		}
++		if (!e->name) {
++			bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
++			return -ENOTSUPP;
++		}
++
++		break;
++	default:
++		bcma_err(bus, "Unsupported flash type\n");
++		return -ENOTSUPP;
++	}
++
++	sflash->window = BCMA_SOC_FLASH2;
++	sflash->blocksize = e->blocksize;
++	sflash->numblocks = e->numblocks;
++	sflash->size = sflash->blocksize * sflash->numblocks;
++	sflash->present = true;
++
++	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
++		  e->name, sflash->size / 1024, sflash->blocksize,
++		  sflash->numblocks);
++
++	/* Prepare platform device, but don't register it yet. It's too early,
++	 * malloc (required by device_private_init) is not available yet. */
++	bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
++					  sflash->size;
++	bcma_sflash_dev.dev.platform_data = sflash;
++
+ 	return 0;
+ }
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -181,47 +181,66 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+ {
+ 	struct bcma_bus *bus = mcore->core->bus;
++	struct bcma_drv_cc *cc = &bus->drv_cc;
+ 
+-	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ 	case BCMA_CC_FLASHT_STSER:
+ 	case BCMA_CC_FLASHT_ATSER:
+ 		bcma_debug(bus, "Found serial flash\n");
+-		bcma_sflash_init(&bus->drv_cc);
++		bcma_sflash_init(cc);
+ 		break;
+ 	case BCMA_CC_FLASHT_PARA:
+ 		bcma_debug(bus, "Found parallel flash\n");
+-		bus->drv_cc.pflash.window = 0x1c000000;
+-		bus->drv_cc.pflash.window_size = 0x02000000;
++		cc->pflash.present = true;
++		cc->pflash.window = BCMA_SOC_FLASH2;
++		cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
+ 
+-		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++		if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
+ 		     BCMA_CC_FLASH_CFG_DS) == 0)
+-			bus->drv_cc.pflash.buswidth = 1;
++			cc->pflash.buswidth = 1;
+ 		else
+-			bus->drv_cc.pflash.buswidth = 2;
++			cc->pflash.buswidth = 2;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Flash type not supported\n");
+ 	}
+ 
+-	if (bus->drv_cc.core->id.rev == 38 ||
++	if (cc->core->id.rev == 38 ||
+ 	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+-		if (bus->drv_cc.capabilities & BCMA_CC_CAP_NFLASH) {
++		if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
+ 			bcma_debug(bus, "Found NAND flash\n");
+-			bcma_nflash_init(&bus->drv_cc);
++			bcma_nflash_init(cc);
+ 		}
+ 	}
+ }
+ 
++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	if (mcore->early_setup_done)
++		return;
++
++	bcma_chipco_serial_init(&bus->drv_cc);
++	bcma_core_mips_flash_detect(mcore);
++
++	mcore->early_setup_done = true;
++}
++
+ void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+ {
+ 	struct bcma_bus *bus;
+ 	struct bcma_device *core;
+ 	bus = mcore->core->bus;
+ 
++	if (mcore->setup_done)
++		return;
++
+ 	bcma_info(bus, "Initializing MIPS core...\n");
+ 
+-	if (!mcore->setup_done)
+-		mcore->assigned_irqs = 1;
++	bcma_core_mips_early_init(mcore);
++
++	mcore->assigned_irqs = 1;
+ 
+ 	/* Assign IRQs to all cores on the bus */
+ 	list_for_each_entry(core, &bus->cores, list) {
+@@ -256,10 +275,5 @@ void bcma_core_mips_init(struct bcma_drv
+ 	bcma_info(bus, "IRQ reconfiguration done\n");
+ 	bcma_core_mips_dump_irq(bus);
+ 
+-	if (mcore->setup_done)
+-		return;
+-
+-	bcma_chipco_serial_init(&bus->drv_cc);
+-	bcma_core_mips_flash_detect(mcore);
+ 	mcore->setup_done = true;
+ }
+--- a/drivers/bcma/driver_pci.c
++++ b/drivers/bcma/driver_pci.c
+@@ -51,7 +51,7 @@ static void bcma_pcie_mdio_set_phy(struc
+ 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
+ 			break;
+-		msleep(1);
++		usleep_range(1000, 2000);
+ 	}
+ }
+ 
+@@ -92,7 +92,7 @@ static u16 bcma_pcie_mdio_read(struct bc
+ 			ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
+ 			break;
+ 		}
+-		msleep(1);
++		usleep_range(1000, 2000);
+ 	}
+ 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ 	return ret;
+@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct
+ 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
+ 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
+ 			break;
+-		msleep(1);
++		usleep_range(1000, 2000);
+ 	}
+ 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
+ }
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -35,11 +35,6 @@ bool __devinit bcma_core_pci_is_in_hostm
+ 	    chipid_top != 0x5300)
+ 		return false;
+ 
+-	if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
+-		bcma_info(bus, "This PCI core is disabled and not working\n");
+-		return false;
+-	}
+-
+ 	bcma_core_enable(pc->core, 0);
+ 
+ 	return !mips_busprobe32(tmp, pc->core->io_addr);
+@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in
+ 
+ 	bcma_info(bus, "PCIEcore in host mode found\n");
+ 
++	if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
++		bcma_info(bus, "This PCIE core is disabled and not working\n");
++		return;
++	}
++
+ 	pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
+ 	if (!pc_host)  {
+ 		bcma_err(bus, "can not allocate memory");
+@@ -425,9 +425,9 @@ void __devinit bcma_core_pci_hostmode_in
+ 	pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
+ 
+ 	/* Reset RC */
+-	udelay(3000);
++	usleep_range(3000, 5000);
+ 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
+-	udelay(1000);
++	usleep_range(1000, 2000);
+ 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ 			BCMA_CORE_PCI_CTL_RST_OE);
+ 
+@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in
+ 			pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
+ 			pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
+ 						    BCMA_SOC_PCI_MEM_SZ - 1;
++			pc_host->io_resource.start = 0x100;
++			pc_host->io_resource.end = 0x47F;
+ 			pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
+ 			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+ 					tmp | BCMA_SOC_PCI_MEM);
+@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in
+ 			pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
+ 			pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
+ 						    BCMA_SOC_PCI_MEM_SZ - 1;
++			pc_host->io_resource.start = 0x480;
++			pc_host->io_resource.end = 0x7FF;
+ 			pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
+ 			pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
+ 			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
+@@ -481,7 +485,7 @@ void __devinit bcma_core_pci_hostmode_in
+ 	 * before issuing configuration requests to PCI Express
+ 	 * devices.
+ 	 */
+-	udelay(100000);
++	msleep(100);
+ 
+ 	bcma_core_pci_enable_crs(pc);
+ 
+@@ -501,7 +505,7 @@ void __devinit bcma_core_pci_hostmode_in
+ 	set_io_port_base(pc_host->pci_controller.io_map_base);
+ 	/* Give some time to the PCI controller to configure itself with the new
+ 	 * values. Not waiting at this point causes crashes of the machine. */
+-	mdelay(10);
++	usleep_range(10000, 15000);
+ 	register_pci_controller(&pc_host->pci_controller);
+ 	return;
+ }
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
+ }
+ 
+ #ifdef CONFIG_BCMA_BLOCKIO
+-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+-			      size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++				     size_t count, u16 offset, u8 reg_width)
+ {
+ 	void __iomem *addr = core->bus->mmio + offset;
+ 	if (core->bus->mapped_core != core)
+@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
+ 	}
+ }
+ 
+-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+-			       size_t count, u16 offset, u8 reg_width)
++static void bcma_host_pci_block_write(struct bcma_device *core,
++				      const void *buffer, size_t count,
++				      u16 offset, u8 reg_width)
+ {
+ 	void __iomem *addr = core->bus->mmio + offset;
+ 	if (core->bus->mapped_core != core)
+@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
+ 	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+ }
+ 
+-const struct bcma_host_ops bcma_host_pci_ops = {
++static const struct bcma_host_ops bcma_host_pci_ops = {
+ 	.read8		= bcma_host_pci_read8,
+ 	.read16		= bcma_host_pci_read16,
+ 	.read32		= bcma_host_pci_read32,
+@@ -272,6 +273,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
++	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ 	{ 0, },
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
+ 	writel(value, core->io_wrap + offset);
+ }
+ 
+-const struct bcma_host_ops bcma_host_soc_ops = {
++static const struct bcma_host_ops bcma_host_soc_ops = {
+ 	.read8		= bcma_host_soc_read8,
+ 	.read16		= bcma_host_soc_read16,
+ 	.read32		= bcma_host_soc_read32,
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -7,6 +7,7 @@
+ 
+ #include "bcma_private.h"
+ #include <linux/module.h>
++#include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+ 
+@@ -80,6 +81,18 @@ struct bcma_device *bcma_find_core(struc
+ }
+ EXPORT_SYMBOL_GPL(bcma_find_core);
+ 
++static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
++					       u8 unit)
++{
++	struct bcma_device *core;
++
++	list_for_each_entry(core, &bus->cores, list) {
++		if (core->id.id == coreid && core->core_unit == unit)
++			return core;
++	}
++	return NULL;
++}
++
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+@@ -136,14 +149,31 @@ static int bcma_register_cores(struct bc
+ 		dev_id++;
+ 	}
+ 
++#ifdef CONFIG_BCMA_SFLASH
++	if (bus->drv_cc.sflash.present) {
++		err = platform_device_register(&bcma_sflash_dev);
++		if (err)
++			bcma_err(bus, "Error registering serial flash\n");
++	}
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++	if (bus->drv_cc.nflash.present) {
++		err = platform_device_register(&bcma_nflash_dev);
++		if (err)
++			bcma_err(bus, "Error registering NAND flash\n");
++	}
++#endif
++
+ 	return 0;
+ }
+ 
+ static void bcma_unregister_cores(struct bcma_bus *bus)
+ {
+-	struct bcma_device *core;
++	struct bcma_device *core, *tmp;
+ 
+-	list_for_each_entry(core, &bus->cores, list) {
++	list_for_each_entry_safe(core, tmp, &bus->cores, list) {
++		list_del(&core->list);
+ 		if (core->dev_registered)
+ 			device_unregister(&core->dev);
+ 	}
+@@ -165,6 +195,20 @@ int __devinit bcma_bus_register(struct b
+ 		return -1;
+ 	}
+ 
++	/* Early init CC core */
++	core = bcma_find_core(bus, bcma_cc_core_id(bus));
++	if (core) {
++		bus->drv_cc.core = core;
++		bcma_core_chipcommon_early_init(&bus->drv_cc);
++	}
++
++	/* Try to get SPROM */
++	err = bcma_sprom_get(bus);
++	if (err == -ENOENT) {
++		bcma_err(bus, "No SPROM available\n");
++	} else if (err)
++		bcma_err(bus, "Failed to get SPROM: %d\n", err);
++
+ 	/* Init CC core */
+ 	core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ 	if (core) {
+@@ -180,10 +224,17 @@ int __devinit bcma_bus_register(struct b
+ 	}
+ 
+ 	/* Init PCIE core */
+-	core = bcma_find_core(bus, BCMA_CORE_PCIE);
++	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
+ 	if (core) {
+-		bus->drv_pci.core = core;
+-		bcma_core_pci_init(&bus->drv_pci);
++		bus->drv_pci[0].core = core;
++		bcma_core_pci_init(&bus->drv_pci[0]);
++	}
++
++	/* Init PCIE core */
++	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
++	if (core) {
++		bus->drv_pci[1].core = core;
++		bcma_core_pci_init(&bus->drv_pci[1]);
+ 	}
+ 
+ 	/* Init GBIT MAC COMMON core */
+@@ -193,13 +244,6 @@ int __devinit bcma_bus_register(struct b
+ 		bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
+ 	}
+ 
+-	/* Try to get SPROM */
+-	err = bcma_sprom_get(bus);
+-	if (err == -ENOENT) {
+-		bcma_err(bus, "No SPROM available\n");
+-	} else if (err)
+-		bcma_err(bus, "Failed to get SPROM: %d\n", err);
+-
+ 	/* Register found cores */
+ 	bcma_register_cores(bus);
+ 
+@@ -210,7 +254,17 @@ int __devinit bcma_bus_register(struct b
+ 
+ void bcma_bus_unregister(struct bcma_bus *bus)
+ {
++	struct bcma_device *cores[3];
++
++	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
++	cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
++
+ 	bcma_unregister_cores(bus);
++
++	kfree(cores[2]);
++	kfree(cores[1]);
++	kfree(cores[0]);
+ }
+ 
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -247,18 +301,18 @@ int __init bcma_bus_early_register(struc
+ 		return -1;
+ 	}
+ 
+-	/* Init CC core */
++	/* Early init CC core */
+ 	core = bcma_find_core(bus, bcma_cc_core_id(bus));
+ 	if (core) {
+ 		bus->drv_cc.core = core;
+-		bcma_core_chipcommon_init(&bus->drv_cc);
++		bcma_core_chipcommon_early_init(&bus->drv_cc);
+ 	}
+ 
+-	/* Init MIPS core */
++	/* Early init MIPS core */
+ 	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ 	if (core) {
+ 		bus->drv_mips.core = core;
+-		bcma_core_mips_init(&bus->drv_mips);
++		bcma_core_mips_early_init(&bus->drv_mips);
+ 	}
+ 
+ 	bcma_info(bus, "Early bus registered\n");
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(
+ 		/* for these chips OTP is always available */
+ 		present = true;
+ 		break;
++	case BCMA_CHIP_ID_BCM43227:
+ 	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM43428:
+ 		present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
+ 		break;
+ 	default:
+@@ -593,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+ 
+ 	err = bcma_sprom_valid(sprom);
+-	if (err)
++	if (err) {
++		bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++		err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+ 		goto out;
++	}
+ 
+ 	bcma_sprom_extract_r8(bus, sprom);
+ 
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -10,7 +10,7 @@
+ #include <linux/bcma/bcma_driver_gmac_cmn.h>
+ #include <linux/ssb/ssb.h> /* SPROM sharing */
+ 
+-#include "bcma_regs.h"
++#include <linux/bcma/bcma_regs.h>
+ 
+ struct bcma_device;
+ struct bcma_bus;
+@@ -251,7 +251,7 @@ struct bcma_bus {
+ 	u8 num;
+ 
+ 	struct bcma_drv_cc drv_cc;
+-	struct bcma_drv_pci drv_pci;
++	struct bcma_drv_pci drv_pci[2];
+ 	struct bcma_drv_mips drv_mips;
+ 	struct bcma_drv_gmac_cmn drv_gmac_cmn;
+ 
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -100,6 +100,7 @@
+ #define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+ #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+ #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
++#define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
+ #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+ #define  BCMA_CC_JCMD_START		0x80000000
+ #define  BCMA_CC_JCMD_BUSY		0x80000000
+@@ -266,6 +267,29 @@
+ #define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
+ #define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
+ #define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
++/* Block 0x140 - 0x190 registers are chipset specific */
++#define BCMA_CC_4706_FLASHSCFG		0x18C		/* Flash struct configuration */
++#define  BCMA_CC_4706_FLASHSCFG_MASK	0x000000ff
++#define  BCMA_CC_4706_FLASHSCFG_SF1	0x00000001	/* 2nd serial flash present */
++#define  BCMA_CC_4706_FLASHSCFG_PF1	0x00000002	/* 2nd parallel flash present */
++#define  BCMA_CC_4706_FLASHSCFG_SF1_TYPE	0x00000004	/* 2nd serial flash type : 0 : ST, 1 : Atmel */
++#define  BCMA_CC_4706_FLASHSCFG_NF1	0x00000008	/* 2nd NAND flash present */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK	0x000000f0
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB	0x00000010	/* 4MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB	0x00000020	/* 8MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB	0x00000030	/* 16MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB	0x00000040	/* 32MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB	0x00000050	/* 64MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB	0x00000060	/* 128MB */
++#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB	0x00000070	/* 256MB */
++/* NAND flash registers for BCM4706 (corerev = 31) */
++#define BCMA_CC_NFLASH_CTL		0x01A0
++#define  BCMA_CC_NFLASH_CTL_ERR		0x08000000
++#define BCMA_CC_NFLASH_CONF		0x01A4
++#define BCMA_CC_NFLASH_COL_ADDR		0x01A8
++#define BCMA_CC_NFLASH_ROW_ADDR		0x01AC
++#define BCMA_CC_NFLASH_DATA		0x01B0
++#define BCMA_CC_NFLASH_WAITCNT0		0x01B4
+ /* 0x1E0 is defined as shared BCMA_CLKCTLST */
+ #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+ #define BCMA_CC_UART0_DATA		0x0300
+@@ -325,6 +349,60 @@
+ #define BCMA_CC_PLLCTL_ADDR		0x0660
+ #define BCMA_CC_PLLCTL_DATA		0x0664
+ #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
++/* NAND flash MLC controller registers (corerev >= 38) */
++#define BCMA_CC_NAND_REVISION		0x0C00
++#define BCMA_CC_NAND_CMD_START		0x0C04
++#define BCMA_CC_NAND_CMD_ADDR_X		0x0C08
++#define BCMA_CC_NAND_CMD_ADDR		0x0C0C
++#define BCMA_CC_NAND_CMD_END_ADDR	0x0C10
++#define BCMA_CC_NAND_CS_NAND_SELECT	0x0C14
++#define BCMA_CC_NAND_CS_NAND_XOR	0x0C18
++#define BCMA_CC_NAND_SPARE_RD0		0x0C20
++#define BCMA_CC_NAND_SPARE_RD4		0x0C24
++#define BCMA_CC_NAND_SPARE_RD8		0x0C28
++#define BCMA_CC_NAND_SPARE_RD12		0x0C2C
++#define BCMA_CC_NAND_SPARE_WR0		0x0C30
++#define BCMA_CC_NAND_SPARE_WR4		0x0C34
++#define BCMA_CC_NAND_SPARE_WR8		0x0C38
++#define BCMA_CC_NAND_SPARE_WR12		0x0C3C
++#define BCMA_CC_NAND_ACC_CONTROL	0x0C40
++#define BCMA_CC_NAND_CONFIG		0x0C48
++#define BCMA_CC_NAND_TIMING_1		0x0C50
++#define BCMA_CC_NAND_TIMING_2		0x0C54
++#define BCMA_CC_NAND_SEMAPHORE		0x0C58
++#define BCMA_CC_NAND_DEVID		0x0C60
++#define BCMA_CC_NAND_DEVID_X		0x0C64
++#define BCMA_CC_NAND_BLOCK_LOCK_STATUS	0x0C68
++#define BCMA_CC_NAND_INTFC_STATUS	0x0C6C
++#define BCMA_CC_NAND_ECC_CORR_ADDR_X	0x0C70
++#define BCMA_CC_NAND_ECC_CORR_ADDR	0x0C74
++#define BCMA_CC_NAND_ECC_UNC_ADDR_X	0x0C78
++#define BCMA_CC_NAND_ECC_UNC_ADDR	0x0C7C
++#define BCMA_CC_NAND_READ_ERROR_COUNT	0x0C80
++#define BCMA_CC_NAND_CORR_STAT_THRESHOLD	0x0C84
++#define BCMA_CC_NAND_READ_ADDR_X	0x0C90
++#define BCMA_CC_NAND_READ_ADDR		0x0C94
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X	0x0C98
++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR	0x0C9C
++#define BCMA_CC_NAND_COPY_BACK_ADDR_X	0x0CA0
++#define BCMA_CC_NAND_COPY_BACK_ADDR	0x0CA4
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X	0x0CA8
++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR	0x0CAC
++#define BCMA_CC_NAND_INV_READ_ADDR_X	0x0CB0
++#define BCMA_CC_NAND_INV_READ_ADDR	0x0CB4
++#define BCMA_CC_NAND_BLK_WR_PROTECT	0x0CC0
++#define BCMA_CC_NAND_ACC_CONTROL_CS1	0x0CD0
++#define BCMA_CC_NAND_CONFIG_CS1		0x0CD4
++#define BCMA_CC_NAND_TIMING_1_CS1	0x0CD8
++#define BCMA_CC_NAND_TIMING_2_CS1	0x0CDC
++#define BCMA_CC_NAND_SPARE_RD16		0x0D30
++#define BCMA_CC_NAND_SPARE_RD20		0x0D34
++#define BCMA_CC_NAND_SPARE_RD24		0x0D38
++#define BCMA_CC_NAND_SPARE_RD28		0x0D3C
++#define BCMA_CC_NAND_CACHE_ADDR		0x0D40
++#define BCMA_CC_NAND_CACHE_DATA		0x0D44
++#define BCMA_CC_NAND_CTRL_CONFIG	0x0D48
++#define BCMA_CC_NAND_CTRL_STATUS	0x0D4C
+ 
+ /* Divider allocation in 4716/47162/5356 */
+ #define BCMA_CC_PMU5_MAINPLL_CPU	1
+@@ -415,6 +493,13 @@
+ /* 4313 Chip specific ChipControl register bits */
+ #define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
+ 
++/* BCM5357 ChipControl register bits */
++#define BCMA_CHIPCTL_5357_EXTPA			BIT(14)
++#define BCMA_CHIPCTL_5357_ANT_MUX_2O3		BIT(15)
++#define BCMA_CHIPCTL_5357_NFLASH		BIT(16)
++#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE	BIT(18)
++#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE	BIT(19)
++
+ /* Data for the PMU, if available.
+  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+  */
+@@ -425,11 +510,35 @@ struct bcma_chipcommon_pmu {
+ 
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ struct bcma_pflash {
++	bool present;
+ 	u8 buswidth;
+ 	u32 window;
+ 	u32 window_size;
+ };
+ 
++#ifdef CONFIG_BCMA_SFLASH
++struct bcma_sflash {
++	bool present;
++	u32 window;
++	u32 blocksize;
++	u16 numblocks;
++	u32 size;
++
++	struct mtd_info *mtd;
++};
++#endif
++
++#ifdef CONFIG_BCMA_NFLASH
++struct mtd_info;
++
++struct bcma_nflash {
++	bool present;
++	bool boot;		/* This is the flash the SoC boots from */
++
++	struct mtd_info *mtd;
++};
++#endif
++
+ struct bcma_serial_port {
+ 	void *regs;
+ 	unsigned long clockspeed;
+@@ -445,11 +554,18 @@ struct bcma_drv_cc {
+ 	u32 capabilities;
+ 	u32 capabilities_ext;
+ 	u8 setup_done:1;
++	u8 early_setup_done:1;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct bcma_chipcommon_pmu pmu;
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ 	struct bcma_pflash pflash;
++#ifdef CONFIG_BCMA_SFLASH
++	struct bcma_sflash sflash;
++#endif
++#ifdef CONFIG_BCMA_NFLASH
++	struct bcma_nflash nflash;
++#endif
+ 
+ 	int nr_serial_ports;
+ 	struct bcma_serial_port serial_ports[4];
+@@ -470,6 +586,7 @@ struct bcma_drv_cc {
+ 	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+ 
+ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
+ 
+ extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+ extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+@@ -493,6 +610,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ 
+ /* PMU support */
+ extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
+ 
+ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+ 				  u32 value);
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -35,13 +35,16 @@ struct bcma_device;
+ struct bcma_drv_mips {
+ 	struct bcma_device *core;
+ 	u8 setup_done:1;
++	u8 early_setup_done:1;
+ 	unsigned int assigned_irqs;
+ };
+ 
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+ #endif
+ 
+ extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+--- a/include/linux/bcma/bcma_regs.h
++++ b/include/linux/bcma/bcma_regs.h
+@@ -11,11 +11,13 @@
+ #define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+ #define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
+ #define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
++#define  BCMA_CLKCTLST_EXTRESREQ_SHIFT	8
+ #define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
+ #define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
+ #define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
+ #define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
+ #define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
++#define  BCMA_CLKCTLST_EXTRESST_SHIFT	24
+ /* Is there any BCM4328 on BCMA bus? */
+ #define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+ #define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+@@ -83,4 +85,9 @@
+ 							 * (2 ZettaBytes), high 32 bits
+ 							 */
+ 
++#define BCMA_SOC_FLASH1			0x1fc00000	/* MIPS Flash Region 1 */
++#define BCMA_SOC_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
++#define BCMA_SOC_FLASH2			0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
++#define BCMA_SOC_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
++
+ #endif /* LINUX_BCMA_REGS_H_ */