kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing

SVN-Revision: 29574

2 files changed, 2298 insertions, 112 deletions

diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch
index 74e9c7fa12..32f5557673 100644
--- a/target/linux/generic/patches-3.0/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.0/020-ssb_update.patch
@@ -1,5 +1,42 @@
+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -5,12 +5,13 @@
+  * because of its small size we include it in the SSB core
+  * instead of creating a standalone module.
+  *
+- * Copyright 2007  Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007  Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
+ #include <linux/pci.h>
++#include <linux/module.h>
+ #include <linux/ssb/ssb.h>
+ 
+ #include "ssb_private.h"
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -3,7 +3,7 @@
+  * Broadcom ChipCommon core driver
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 --- a/drivers/ssb/driver_chipcommon_pmu.c
 +++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -2,7 +2,7 @@
+  * Sonics Silicon Backplane
+  * Broadcom ChipCommon Power Management Unit driver
+  *
+- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2009, Michael Buesch <m@bues.ch>
+  * Copyright 2007, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
 @@ -417,9 +417,9 @@ static void ssb_pmu_resources_init(struc
  	u32 min_msk = 0, max_msk = 0;
  	unsigned int i;
@@ -12,8 +49,28 @@
  
  	switch (bus->chip_id) {
  	case 0x4312:
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -3,7 +3,7 @@
+  * Broadcom EXTIF core driver
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
+  * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
+  *
 --- a/drivers/ssb/driver_gige.c
 +++ b/drivers/ssb/driver_gige.c
+@@ -3,7 +3,7 @@
+  * Broadcom Gigabit Ethernet core driver
+  *
+  * Copyright 2008, Broadcom Corporation
+- * Copyright 2008, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2008, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 @@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
  	gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
  }
@@ -48,8 +105,28 @@
  {
  	struct ssb_gige *dev;
  	u32 base, tmslow, tmshigh;
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -3,7 +3,7 @@
+  * Broadcom MIPS core driver
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 --- a/drivers/ssb/driver_pcicore.c
 +++ b/drivers/ssb/driver_pcicore.c
+@@ -3,7 +3,7 @@
+  * Broadcom PCI-core driver
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 @@ -314,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
  	return ssb_mips_irq(extpci_core->dev) + 2;
  }
@@ -77,16 +154,27 @@
  {
  	u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
  	if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
-@@ -514,7 +514,7 @@ static void ssb_pcicore_pcie_setup_worka
+@@ -514,12 +514,16 @@ static void ssb_pcicore_pcie_setup_worka
   * Generic and Clientmode operation code.
   **************************************************/
  
 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
  {
- 	ssb_pcicore_fix_sprom_core_index(pc);
+-	ssb_pcicore_fix_sprom_core_index(pc);
++	struct ssb_device *pdev = pc->dev;
++	struct ssb_bus *bus = pdev->bus;
++
++	if (bus->bustype == SSB_BUSTYPE_PCI)
++		ssb_pcicore_fix_sprom_core_index(pc);
  
-@@ -529,7 +529,7 @@ static void ssb_pcicore_init_clientmode(
+ 	/* Disable PCI interrupts. */
+-	ssb_write32(pc->dev, SSB_INTVEC, 0);
++	ssb_write32(pdev, SSB_INTVEC, 0);
+ 
+ 	/* Additional PCIe always once-executed workarounds */
+ 	if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+@@ -529,7 +533,7 @@ static void ssb_pcicore_init_clientmode(
  	}
  }
  
@@ -95,9 +183,37 @@
  {
  	struct ssb_device *dev = pc->dev;
  
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -3,7 +3,7 @@
+  * Embedded systems support code
+  *
+  * Copyright 2005-2008, Broadcom Corporation
+- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
-@@ -557,7 +557,7 @@ error:
+@@ -3,7 +3,7 @@
+  * Subsystem core
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -12,6 +12,7 @@
+ 
+ #include <linux/delay.h>
+ #include <linux/io.h>
++#include <linux/module.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_gige.h>
+@@ -557,7 +558,7 @@ error:
  }
  
  /* Needs ssb_buses_lock() */
@@ -106,7 +222,7 @@
  {
  	struct ssb_bus *bus, *n;
  	int err = 0;
-@@ -768,9 +768,9 @@ out:
+@@ -768,9 +769,9 @@ out:
  	return err;
  }
  
@@ -119,7 +235,7 @@
  {
  	int err;
  
-@@ -851,8 +851,8 @@ err_disable_xtal:
+@@ -851,8 +852,8 @@ err_disable_xtal:
  }
  
  #ifdef CONFIG_SSB_PCIHOST
@@ -130,7 +246,7 @@
  {
  	int err;
  
-@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
  #endif /* CONFIG_SSB_PCIHOST */
  
  #ifdef CONFIG_SSB_PCMCIAHOST
@@ -143,7 +259,7 @@
  {
  	int err;
  
-@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
+@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
  #endif /* CONFIG_SSB_PCMCIAHOST */
  
  #ifdef CONFIG_SSB_SDIOHOST
@@ -155,7 +271,7 @@
  {
  	int err;
  
-@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_
+@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_
  EXPORT_SYMBOL(ssb_bus_sdiobus_register);
  #endif /* CONFIG_SSB_PCMCIAHOST */
  
@@ -168,7 +284,7 @@
  {
  	int err;
  
-@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
  	switch (plltype) {
  	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
  		if (m & SSB_CHIPCO_CLK_T6_MMASK)
@@ -179,21 +295,84 @@
  	case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
  	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
  	case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
-@@ -1265,7 +1266,10 @@ u32 ssb_dma_translation(struct ssb_devic
+@@ -1259,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic
+ }
+ EXPORT_SYMBOL(ssb_device_disable);
+ 
++/* Some chipsets need routing known for PCIe and 64-bit DMA */
++static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
++{
++	u16 chip_id = dev->bus->chip_id;
++
++	if (dev->id.coreid == SSB_DEV_80211) {
++		return (chip_id == 0x4322 || chip_id == 43221 ||
++			chip_id == 43231 || chip_id == 43222);
++	}
++
++	return 0;
++}
++
+ u32 ssb_dma_translation(struct ssb_device *dev)
+ {
+ 	switch (dev->bus->bustype) {
  	case SSB_BUSTYPE_SSB:
  		return 0;
  	case SSB_BUSTYPE_PCI:
 -		return SSB_PCI_DMA;
-+		if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64)
++		if (pci_is_pcie(dev->bus->host_pci) &&
++		    ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
 +			return SSB_PCIE_DMA_H32;
-+		else
-+			return SSB_PCI_DMA;
++		} else {
++			if (ssb_dma_translation_special_bit(dev))
++				return SSB_PCIE_DMA_H32;
++			else
++				return SSB_PCI_DMA;
++		}
  	default:
  		__ssb_dma_not_implemented(dev);
  	}
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
-@@ -734,12 +734,9 @@ out_free:
+@@ -1,7 +1,7 @@
+ /*
+  * Sonics Silicon Backplane PCI-Hostbus related functions.
+  *
+- * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2006 Michael Buesch <m@bues.ch>
+  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
+@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_
+ 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+ 	       sizeof(out->antenna_gain.ghz5));
+ 
++	/* Extract FEM info */
++	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
++		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
++		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++	SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
++		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++	SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
++		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++	SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
++		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++	SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
++		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++	SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
++		SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++	SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
++		SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++	SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
++		SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
++		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
+ 	sprom_extract_r458(out, in);
+ 
+ 	/* TODO - get remaining rev 8 stuff needed */
+@@ -734,12 +757,9 @@ out_free:
  static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
  				  struct ssb_boardinfo *bi)
  {
@@ -211,6 +390,15 @@
  int ssb_pci_get_invariants(struct ssb_bus *bus,
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
+@@ -6,7 +6,7 @@
+  * Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
+  * Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
+  * Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+- * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
++ * Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 @@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci
  # define ssb_pcihost_resume	NULL
  #endif /* CONFIG_PM */
@@ -231,8 +419,28 @@
  {
  	driver->probe = ssb_pcihost_probe;
  	driver->remove = ssb_pcihost_remove;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -3,7 +3,7 @@
+  * PCMCIA-Hostbus related functions
+  *
+  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
 --- a/drivers/ssb/scan.c
 +++ b/drivers/ssb/scan.c
+@@ -2,7 +2,7 @@
+  * Sonics Silicon Backplane
+  * Bus scanning
+  *
+- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
+  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
 @@ -310,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
  	} else {
  		if (bus->bustype == SSB_BUSTYPE_PCI) {
@@ -243,18 +451,59 @@
  			bus->chip_package = 0;
  		} else {
  			bus->chip_id = 0x4710;
+--- a/drivers/ssb/sdio.c
++++ b/drivers/ssb/sdio.c
+@@ -6,7 +6,7 @@
+  *
+  * Based on drivers/ssb/pcmcia.c
+  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  *
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -2,7 +2,7 @@
+  * Sonics Silicon Backplane
+  * Common SPROM support routines
+  *
+- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
+  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
+  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
+  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -27,6 +27,8 @@ struct ssb_sprom {
+@@ -25,8 +25,10 @@ struct ssb_sprom {
+ 	u8 et1phyaddr;		/* MII address for enet1 */
+ 	u8 et0mdcport;		/* MDIO for enet0 */
  	u8 et1mdcport;		/* MDIO for enet1 */
- 	u8 board_rev;		/* Board revision number from SPROM. */
+-	u8 board_rev;		/* Board revision number from SPROM. */
++	u16 board_rev;		/* Board revision number from SPROM. */
  	u8 country_code;	/* Country Code */
 +	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
 +	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
  	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
  	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
  	u16 pa0b0;
-@@ -99,7 +101,7 @@ struct ssb_sprom {
+@@ -92,6 +94,15 @@ struct ssb_sprom {
+ 		} ghz5;		/* 5GHz band */
+ 	} antenna_gain;
+ 
++	struct {
++		struct {
++			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++		} ghz2;
++		struct {
++			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
++		} ghz5;
++	} fem;
++
+ 	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+ 
+@@ -99,7 +110,7 @@ struct ssb_sprom {
  struct ssb_boardinfo {
  	u16 vendor;
  	u16 type;
@@ -263,3 +512,101 @@
  };
  
  
+@@ -229,10 +240,9 @@ struct ssb_driver {
+ #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+ 
+ extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+-static inline int ssb_driver_register(struct ssb_driver *drv)
+-{
+-	return __ssb_driver_register(drv, THIS_MODULE);
+-}
++#define ssb_driver_register(drv) \
++	__ssb_driver_register(drv, THIS_MODULE)
++
+ extern void ssb_driver_unregister(struct ssb_driver *drv);
+ 
+ 
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -8,7 +8,7 @@
+  * gpio interface, extbus, and support for serial and parallel flashes.
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GPL version 2. See COPYING for details.
+  */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -432,6 +432,23 @@
+ #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G_SHIFT	8
++#define SSB_SPROM8_FEM2G		0x00AE
++#define SSB_SPROM8_FEM5G		0x00B0
++#define  SSB_SROM8_FEM_TSSIPOS		0x0001
++#define  SSB_SROM8_FEM_TSSIPOS_SHIFT	0
++#define  SSB_SROM8_FEM_EXTPA_GAIN	0x0006
++#define  SSB_SROM8_FEM_EXTPA_GAIN_SHIFT	1
++#define  SSB_SROM8_FEM_PDET_RANGE	0x00F8
++#define  SSB_SROM8_FEM_PDET_RANGE_SHIFT	3
++#define  SSB_SROM8_FEM_TR_ISO		0x0700
++#define  SSB_SROM8_FEM_TR_ISO_SHIFT	8
++#define  SSB_SROM8_FEM_ANTSWLUT		0xF800
++#define  SSB_SROM8_FEM_ANTSWLUT_SHIFT	11
++#define SSB_SPROM8_THERMAL		0x00B2
++#define SSB_SPROM8_MPWR_RAWTS		0x00B4
++#define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
++#define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
++#define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
+ #define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+ #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+@@ -462,6 +479,46 @@
+ #define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
+ #define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
++/* Values for boardflags_lo read from SPROM */
++#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
++#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
++#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
++#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
++#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
++#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
++#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
++#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */
++#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */
++#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
++#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */
++#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */
++#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */
++#define SSB_BFL_HGPA			0x2000	/* had high gain PA */
++#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
++#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
++
++/* Values for boardflags_hi read from SPROM */
++#define SSB_BFH_NOPA			0x0001	/* has no PA */
++#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */
++#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */
++#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */
++#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */
++#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */
++#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */
++
++/* Values for boardflags2_lo read from SPROM */
++#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
++#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
++#define SSB_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */
++#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
++#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
++#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
++#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
++#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
++#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
++#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
++#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
++
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
+ 	SSB_SPROM1CCODE_WORLD = 0,
diff --git a/target/linux/generic/patches-3.0/025-bcma_backport.patch b/target/linux/generic/patches-3.0/025-bcma_backport.patch
index 5e6317f34c..95012ad8dd 100644
--- a/target/linux/generic/patches-3.0/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.0/025-bcma_backport.patch
@@ -12,7 +12,7 @@
  config BCMA_HOST_PCI_POSSIBLE
  	bool
  	depends on BCMA && PCI = y
-@@ -22,6 +27,12 @@ config BCMA_HOST_PCI
+@@ -22,6 +27,25 @@ config BCMA_HOST_PCI
  	bool "Support for BCMA on PCI-host bus"
  	depends on BCMA_HOST_PCI_POSSIBLE
  
@@ -22,23 +22,39 @@
 +	help
 +	  PCI core hostmode operation (external PCI bus).
 +
++config BCMA_HOST_SOC
++	bool
++	depends on BCMA_DRIVER_MIPS
++
++config BCMA_DRIVER_MIPS
++	bool "BCMA Broadcom MIPS core driver"
++	depends on BCMA && MIPS
++	help
++	  Driver for the Broadcom MIPS core attached to Broadcom specific
++	  Advanced Microcontroller Bus.
++
++	  If unsure, say N
++
  config BCMA_DEBUG
  	bool "BCMA debugging"
  	depends on BCMA
 --- a/drivers/bcma/Makefile
 +++ b/drivers/bcma/Makefile
-@@ -1,6 +1,7 @@
+@@ -1,7 +1,10 @@
 -bcma-y					+= main.o scan.o core.o
 +bcma-y					+= main.o scan.o core.o sprom.o
  bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
  bcma-y					+= driver_pci.o
 +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
++bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
  bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
++bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
  obj-$(CONFIG_BCMA)			+= bcma.o
  
+ ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
 --- a/drivers/bcma/bcma_private.h
 +++ b/drivers/bcma/bcma_private.h
-@@ -13,16 +13,23 @@
+@@ -13,11 +13,33 @@
  struct bcma_bus;
  
  /* main.c */
@@ -46,16 +62,35 @@
 -extern void bcma_bus_unregister(struct bcma_bus *bus);
 +int bcma_bus_register(struct bcma_bus *bus);
 +void bcma_bus_unregister(struct bcma_bus *bus);
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++				   struct bcma_device *core_cc,
++				   struct bcma_device *core_mips);
++#ifdef CONFIG_PM
++int bcma_bus_resume(struct bcma_bus *bus);
++#endif
  
  /* scan.c */
  int bcma_bus_scan(struct bcma_bus *bus);
- 
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++			       struct bcma_device_id *match,
++			       struct bcma_device *core);
++void bcma_init_bus(struct bcma_bus *bus);
++
 +/* sprom.c */
 +int bcma_sprom_get(struct bcma_bus *bus);
 +
++/* driver_chipcommon.c */
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++
++/* driver_chipcommon_pmu.c */
++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+ 
  #ifdef CONFIG_BCMA_HOST_PCI
  /* host_pci.c */
- extern int __init bcma_host_pci_init(void);
+@@ -25,4 +47,8 @@ extern int __init bcma_host_pci_init(voi
  extern void __exit bcma_host_pci_exit(void);
  #endif /* CONFIG_BCMA_HOST_PCI */
  
@@ -83,7 +118,7 @@
  
  int bcma_core_enable(struct bcma_device *core, u32 flags)
  {
-@@ -49,3 +50,75 @@ int bcma_core_enable(struct bcma_device
+@@ -49,3 +50,77 @@ int bcma_core_enable(struct bcma_device
  	return 0;
  }
  EXPORT_SYMBOL_GPL(bcma_core_enable);
@@ -147,6 +182,8 @@
 +u32 bcma_core_dma_translation(struct bcma_device *core)
 +{
 +	switch (core->bus->hosttype) {
++	case BCMA_HOSTTYPE_SOC:
++		return 0;
 +	case BCMA_HOSTTYPE_PCI:
 +		if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
 +			return BCMA_DMA_TRANSLATION_DMA64_CMT;
@@ -159,9 +196,171 @@
 +	return BCMA_DMA_TRANSLATION_NONE;
 +}
 +EXPORT_SYMBOL(bcma_core_dma_translation);
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -3,7 +3,7 @@
+  * ChipCommon core driver
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -23,6 +23,12 @@ static inline u32 bcma_cc_write32_masked
+ 
+ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+ {
++	u32 leddc_on = 10;
++	u32 leddc_off = 90;
++
++	if (cc->setup_done)
++		return;
++
+ 	if (cc->core->id.rev >= 11)
+ 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+@@ -38,6 +44,19 @@ void bcma_core_chipcommon_init(struct bc
+ 		bcma_pmu_init(cc);
+ 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
+ 		pr_err("Power control not implemented!\n");
++
++	if (cc->core->id.rev >= 16) {
++		if (cc->core->bus->sprom.leddc_on_time &&
++		    cc->core->bus->sprom.leddc_off_time) {
++			leddc_on = cc->core->bus->sprom.leddc_on_time;
++			leddc_off = cc->core->bus->sprom.leddc_off_time;
++		}
++		bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
++			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
++			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
++	}
++
++	cc->setup_done = true;
+ }
+ 
+ /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+@@ -87,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ {
+ 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ }
++
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
++{
++	unsigned int irq;
++	u32 baud_base;
++	u32 i;
++	unsigned int ccrev = cc->core->id.rev;
++	struct bcma_serial_port *ports = cc->serial_ports;
++
++	if (ccrev >= 11 && ccrev != 15) {
++		/* Fixed ALP clock */
++		baud_base = bcma_pmu_alp_clock(cc);
++		if (ccrev >= 21) {
++			/* Turn off UART clock before switching clocksource. */
++			bcma_cc_write32(cc, BCMA_CC_CORECTL,
++				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++				       & ~BCMA_CC_CORECTL_UARTCLKEN);
++		}
++		/* Set the override bit so we don't divide it */
++		bcma_cc_write32(cc, BCMA_CC_CORECTL,
++			       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++			       | BCMA_CC_CORECTL_UARTCLK0);
++		if (ccrev >= 21) {
++			/* Re-enable the UART clock. */
++			bcma_cc_write32(cc, BCMA_CC_CORECTL,
++				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
++				       | BCMA_CC_CORECTL_UARTCLKEN);
++		}
++	} else {
++		pr_err("serial not supported on this device ccrev: 0x%x\n",
++		       ccrev);
++		return;
++	}
++
++	irq = bcma_core_mips_irq(cc->core);
++
++	/* Determine the registers of the UARTs */
++	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
++	for (i = 0; i < cc->nr_serial_ports; i++) {
++		ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
++				(i * 256);
++		ports[i].irq = irq;
++		ports[i].baud_base = baud_base;
++		ports[i].reg_shift = 0;
++	}
++}
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -53,6 +53,7 @@ static void bcma_pmu_resources_init(stru
+@@ -2,7 +2,7 @@
+  * Broadcom specific AMBA
+  * ChipCommon Power Management Unit driver
+  *
+- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2009, Michael Buesch <m@bues.ch>
+  * Copyright 2007, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+@@ -11,20 +11,47 @@
+ #include "bcma_private.h"
+ #include <linux/bcma/bcma.h>
+ 
+-static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+-					u32 offset, u32 mask, u32 set)
++static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
+ {
+-	u32 value;
++	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
++	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
++}
+ 
+-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
++void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
++{
++	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
++	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
++
++void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
++			     u32 set)
++{
++	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
++	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
++	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
++
++void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
++				 u32 offset, u32 mask, u32 set)
++{
+ 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+ 	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+-	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+-	value &= mask;
+-	value |= set;
+-	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
++	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
++
++void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
++				u32 set)
++{
++	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
++	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
++	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+ 
+ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+ {
+@@ -53,6 +80,7 @@ static void bcma_pmu_resources_init(stru
  		max_msk = 0xFFFF;
  		break;
  	case 43224:
@@ -169,7 +368,7 @@
  		break;
  	default:
  		pr_err("PMU resource config unknown for device 0x%04X\n",
-@@ -74,6 +75,7 @@ void bcma_pmu_swreg_init(struct bcma_drv
+@@ -74,6 +102,7 @@ void bcma_pmu_swreg_init(struct bcma_drv
  	case 0x4313:
  	case 0x4331:
  	case 43224:
@@ -177,7 +376,39 @@
  		break;
  	default:
  		pr_err("PMU switch/regulators init unknown for device "
-@@ -96,11 +98,13 @@ void bcma_pmu_workarounds(struct bcma_dr
+@@ -81,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv
+ 	}
+ }
+ 
++/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
++{
++	struct bcma_bus *bus = cc->core->bus;
++	u32 val;
++
++	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
++	if (enable) {
++		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
++		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
++			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
++	} else {
++		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
++		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
++	}
++	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
++}
++
+ void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+@@ -90,17 +137,19 @@ void bcma_pmu_workarounds(struct bcma_dr
+ 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+ 		break;
+ 	case 0x4331:
+-		pr_err("Enabling Ext PA lines not implemented\n");
++		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+ 		break;
+ 	case 43224:
  		if (bus->chipinfo.rev == 0) {
  			pr_err("Workarounds for 43224 rev 0 not fully "
  				"implemented\n");
@@ -192,9 +423,407 @@
  	default:
  		pr_err("Workarounds unknown for device 0x%04X\n",
  			bus->chipinfo.id);
+@@ -132,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ 	bcma_pmu_swreg_init(cc);
+ 	bcma_pmu_workarounds(cc);
+ }
++
++u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	switch (bus->chipinfo.id) {
++	case 0x4716:
++	case 0x4748:
++	case 47162:
++	case 0x4313:
++	case 0x5357:
++	case 0x4749:
++	case 53572:
++		/* always 20Mhz */
++		return 20000 * 1000;
++	case 0x5356:
++	case 0x5300:
++		/* always 25Mhz */
++		return 25000 * 1000;
++	default:
++		pr_warn("No ALP clock specified for %04X device, "
++			"pmu rev. %d, using default %d Hz\n",
++			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
++	}
++	return BCMA_CC_PMU_ALP_CLOCK;
++}
++
++/* Find the output of the "m" pll divider given pll controls that start with
++ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
++ */
++static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
++{
++	u32 tmp, div, ndiv, p1, p2, fc;
++	struct bcma_bus *bus = cc->core->bus;
++
++	BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
++
++	BUG_ON(!m || m > 4);
++
++	if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
++		/* Detect failure in clock setting */
++		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
++		if (tmp & 0x40000)
++			return 133 * 1000000;
++	}
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
++	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
++	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
++	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
++		BCMA_CC_PPL_MDIV_MASK;
++
++	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
++	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
++
++	/* Do calculation in Mhz */
++	fc = bcma_pmu_alp_clock(cc) / 1000000;
++	fc = (p1 * ndiv * fc) / p2;
++
++	/* Return clock in Hertz */
++	return (fc / div) * 1000000;
++}
++
++/* query bus clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	switch (bus->chipinfo.id) {
++	case 0x4716:
++	case 0x4748:
++	case 47162:
++		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_SSB);
++	case 0x5356:
++		return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_SSB);
++	case 0x5357:
++	case 0x4749:
++		return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_SSB);
++	case 0x5300:
++		return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
++				      BCMA_CC_PMU5_MAINPLL_SSB);
++	case 53572:
++		return 75000000;
++	default:
++		pr_warn("No backplane clock specified for %04X device, "
++			"pmu rev. %d, using default %d Hz\n",
++			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
++	}
++	return BCMA_CC_PMU_HT_CLOCK;
++}
++
++/* query cpu clock frequency for PMU-enabled chipcommon */
++u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
++{
++	struct bcma_bus *bus = cc->core->bus;
++
++	if (bus->chipinfo.id == 53572)
++		return 300000000;
++
++	if (cc->pmu.rev >= 5) {
++		u32 pll;
++		switch (bus->chipinfo.id) {
++		case 0x5356:
++			pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
++			break;
++		case 0x5357:
++		case 0x4749:
++			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
++			break;
++		default:
++			pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
++			break;
++		}
++
++		/* TODO: if (bus->chipinfo.id == 0x5300)
++		  return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
++		return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
++	}
++
++	return bcma_pmu_get_clockcontrol(cc);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_mips.c
+@@ -0,0 +1,256 @@
++/*
++ * Broadcom specific AMBA
++ * Broadcom MIPS32 74K core driver
++ *
++ * Copyright 2009, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
++ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/time.h>
++
++/* The 47162a0 hangs when reading MIPS DMP registers registers */
++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
++{
++	return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
++	       dev->id.id == BCMA_CORE_MIPS_74K;
++}
++
++/* The 5357b0 hangs when reading USB20H DMP registers */
++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
++{
++	return (dev->bus->chipinfo.id == 0x5357 ||
++		dev->bus->chipinfo.id == 0x4749) &&
++	       dev->bus->chipinfo.pkg == 11 &&
++	       dev->id.id == BCMA_CORE_USB20_HOST;
++}
++
++static inline u32 mips_read32(struct bcma_drv_mips *mcore,
++			      u16 offset)
++{
++	return bcma_read32(mcore->core, offset);
++}
++
++static inline void mips_write32(struct bcma_drv_mips *mcore,
++				u16 offset,
++				u32 value)
++{
++	bcma_write32(mcore->core, offset, value);
++}
++
++static const u32 ipsflag_irq_mask[] = {
++	0,
++	BCMA_MIPS_IPSFLAG_IRQ1,
++	BCMA_MIPS_IPSFLAG_IRQ2,
++	BCMA_MIPS_IPSFLAG_IRQ3,
++	BCMA_MIPS_IPSFLAG_IRQ4,
++};
++
++static const u32 ipsflag_irq_shift[] = {
++	0,
++	BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
++	BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
++};
++
++static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
++{
++	u32 flag;
++
++	if (bcma_core_mips_bcm47162a0_quirk(dev))
++		return dev->core_index;
++	if (bcma_core_mips_bcm5357b0_quirk(dev))
++		return dev->core_index;
++	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
++
++	return flag & 0x1F;
++}
++
++/* Get the MIPS IRQ assignment for a specified device.
++ * If unassigned, 0 is returned.
++ */
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++{
++	struct bcma_device *mdev = dev->bus->drv_mips.core;
++	u32 irqflag;
++	unsigned int irq;
++
++	irqflag = bcma_core_mips_irqflag(dev);
++
++	for (irq = 1; irq <= 4; irq++)
++		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
++		    (1 << irqflag))
++			return irq;
++
++	return 0;
++}
++EXPORT_SYMBOL(bcma_core_mips_irq);
++
++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
++{
++	unsigned int oldirq = bcma_core_mips_irq(dev);
++	struct bcma_bus *bus = dev->bus;
++	struct bcma_device *mdev = bus->drv_mips.core;
++	u32 irqflag;
++
++	irqflag = bcma_core_mips_irqflag(dev);
++	BUG_ON(oldirq == 6);
++
++	dev->irq = irq + 2;
++
++	/* clear the old irq */
++	if (oldirq == 0)
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
++			    ~(1 << irqflag));
++	else
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
++
++	/* assign the new one */
++	if (irq == 0) {
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
++			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
++			    (1 << irqflag));
++	} else {
++		u32 oldirqflag = bcma_read32(mdev,
++					     BCMA_MIPS_MIPS74K_INTMASK(irq));
++		if (oldirqflag) {
++			struct bcma_device *core;
++
++			/* backplane irq line is in use, find out who uses
++			 * it and set user to irq 0
++			 */
++			list_for_each_entry_reverse(core, &bus->cores, list) {
++				if ((1 << bcma_core_mips_irqflag(core)) ==
++				    oldirqflag) {
++					bcma_core_mips_set_irq(core, 0);
++					break;
++				}
++			}
++		}
++		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
++			     1 << irqflag);
++	}
++
++	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
++		dev->id.id, oldirq + 2, irq + 2);
++}
++
++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
++{
++	int i;
++	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
++	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
++	for (i = 0; i <= 6; i++)
++		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
++	printk("\n");
++}
++
++static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
++{
++	struct bcma_device *core;
++
++	list_for_each_entry_reverse(core, &bus->cores, list) {
++		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
++	}
++}
++
++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
++		return bcma_pmu_get_clockcpu(&bus->drv_cc);
++
++	pr_err("No PMU available, need this to get the cpu clock\n");
++	return 0;
++}
++EXPORT_SYMBOL(bcma_cpu_clock);
++
++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus = mcore->core->bus;
++
++	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++	case BCMA_CC_FLASHT_ATSER:
++		pr_err("Serial flash not supported.\n");
++		break;
++	case BCMA_CC_FLASHT_PARA:
++		pr_info("found parallel flash.\n");
++		bus->drv_cc.pflash.window = 0x1c000000;
++		bus->drv_cc.pflash.window_size = 0x02000000;
++
++		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
++		     BCMA_CC_FLASH_CFG_DS) == 0)
++			bus->drv_cc.pflash.buswidth = 1;
++		else
++			bus->drv_cc.pflash.buswidth = 2;
++		break;
++	default:
++		pr_err("flash not supported.\n");
++	}
++}
++
++void bcma_core_mips_init(struct bcma_drv_mips *mcore)
++{
++	struct bcma_bus *bus;
++	struct bcma_device *core;
++	bus = mcore->core->bus;
++
++	pr_info("Initializing MIPS core...\n");
++
++	if (!mcore->setup_done)
++		mcore->assigned_irqs = 1;
++
++	/* Assign IRQs to all cores on the bus */
++	list_for_each_entry_reverse(core, &bus->cores, list) {
++		int mips_irq;
++		if (core->irq)
++			continue;
++
++		mips_irq = bcma_core_mips_irq(core);
++		if (mips_irq > 4)
++			core->irq = 0;
++		else
++			core->irq = mips_irq + 2;
++		if (core->irq > 5)
++			continue;
++		switch (core->id.id) {
++		case BCMA_CORE_PCI:
++		case BCMA_CORE_PCIE:
++		case BCMA_CORE_ETHERNET:
++		case BCMA_CORE_ETHERNET_GBIT:
++		case BCMA_CORE_MAC_GBIT:
++		case BCMA_CORE_80211:
++		case BCMA_CORE_USB20_HOST:
++			/* These devices get their own IRQ line if available,
++			 * the rest goes on IRQ0
++			 */
++			if (mcore->assigned_irqs <= 4)
++				bcma_core_mips_set_irq(core,
++						       mcore->assigned_irqs++);
++			break;
++		}
++	}
++	pr_info("IRQ reconfiguration done\n");
++	bcma_core_mips_dump_irq(bus);
++
++	if (mcore->setup_done)
++		return;
++
++	bcma_chipco_serial_init(&bus->drv_cc);
++	bcma_core_mips_flash_detect(mcore);
++	mcore->setup_done = true;
++}
 --- a/drivers/bcma/driver_pci.c
 +++ b/drivers/bcma/driver_pci.c
-@@ -157,7 +157,67 @@ static void bcma_pcicore_serdes_workarou
+@@ -3,7 +3,7 @@
+  * PCI Core
+  *
+  * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -157,7 +157,81 @@ static void bcma_pcicore_serdes_workarou
   * Init.
   **************************************************/
  
@@ -214,8 +843,10 @@
 +	    chipid_top != 0x5300)
 +		return false;
 +
-+	if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
++#ifdef CONFIG_SSB_DRIVER_PCICORE
++	if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI)
 +		return false;
++#endif /* CONFIG_SSB_DRIVER_PCICORE */
 +
 +#if 0
 +	/* TODO: on BCMA we use address from EROM instead of magic formula */
@@ -229,6 +860,9 @@
 +
 +void bcma_core_pci_init(struct bcma_drv_pci *pc)
 +{
++	if (pc->setup_done)
++		return;
++
 +	if (bcma_core_pci_is_in_hostmode(pc)) {
 +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
 +		bcma_core_pci_hostmode_init(pc);
@@ -238,6 +872,8 @@
 +	} else {
 +		bcma_core_pci_clientmode_init(pc);
 +	}
++
++	pc->setup_done = true;
 +}
 +
 +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
@@ -245,7 +881,14 @@
 +{
 +	struct pci_dev *pdev = pc->core->bus->host_pci;
 +	u32 coremask, tmp;
-+	int err;
++	int err = 0;
++
++	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
++		/* This bcma device is not on a PCI host-bus. So the IRQs are
++		 * not routed through the PCI core.
++		 * So we must not enable routing through the PCI core. */
++		goto out;
++	}
 +
 +	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 +	if (err)
@@ -263,19 +906,110 @@
 +	return err;
 +}
 +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+--- /dev/null
++++ b/drivers/bcma/driver_pci_host.c
+@@ -0,0 +1,14 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Core in hostmode
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++{
++	pr_err("No support for PCI core in hostmode yet\n");
++}
 --- a/drivers/bcma/host_pci.c
 +++ b/drivers/bcma/host_pci.c
-@@ -65,6 +65,54 @@ static void bcma_host_pci_write32(struct
- 	iowrite32(value, core->bus->mmio + offset);
+@@ -9,6 +9,7 @@
+ #include <linux/slab.h>
+ #include <linux/bcma/bcma.h>
+ #include <linux/pci.h>
++#include <linux/module.h>
+ 
+ static void bcma_host_pci_switch_core(struct bcma_device *core)
+ {
+@@ -20,50 +21,108 @@ static void bcma_host_pci_switch_core(st
+ 	pr_debug("Switched to core: 0x%X\n", core->id.id);
+ }
+ 
+-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+-{
++/* Provides access to the requested core. Returns base offset that has to be
++ * used. It makes use of fixed windows when possible. */
++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core)
++{
++	switch (core->id.id) {
++	case BCMA_CORE_CHIPCOMMON:
++		return 3 * BCMA_CORE_SIZE;
++	case BCMA_CORE_PCIE:
++		return 2 * BCMA_CORE_SIZE;
++	}
++
+ 	if (core->bus->mapped_core != core)
+ 		bcma_host_pci_switch_core(core);
++	return 0;
++}
++
++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
++{
++	offset += bcma_host_pci_provide_access_to_core(core);
+ 	return ioread8(core->bus->mmio + offset);
  }
  
+ static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+ {
+-	if (core->bus->mapped_core != core)
+-		bcma_host_pci_switch_core(core);
++	offset += bcma_host_pci_provide_access_to_core(core);
+ 	return ioread16(core->bus->mmio + offset);
+ }
+ 
+ static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+ {
+-	if (core->bus->mapped_core != core)
+-		bcma_host_pci_switch_core(core);
++	offset += bcma_host_pci_provide_access_to_core(core);
+ 	return ioread32(core->bus->mmio + offset);
+ }
+ 
+ static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+ 				 u8 value)
+ {
+-	if (core->bus->mapped_core != core)
+-		bcma_host_pci_switch_core(core);
++	offset += bcma_host_pci_provide_access_to_core(core);
+ 	iowrite8(value, core->bus->mmio + offset);
+ }
+ 
+ static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+ 				 u16 value)
+ {
+-	if (core->bus->mapped_core != core)
+-		bcma_host_pci_switch_core(core);
++	offset += bcma_host_pci_provide_access_to_core(core);
+ 	iowrite16(value, core->bus->mmio + offset);
+ }
+ 
+ static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+ 				 u32 value)
+ {
++	offset += bcma_host_pci_provide_access_to_core(core);
++	iowrite32(value, core->bus->mmio + offset);
++}
++
 +#ifdef CONFIG_BCMA_BLOCKIO
 +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
 +			      size_t count, u16 offset, u8 reg_width)
 +{
 +	void __iomem *addr = core->bus->mmio + offset;
-+	if (core->bus->mapped_core != core)
-+		bcma_host_pci_switch_core(core);
+ 	if (core->bus->mapped_core != core)
+ 		bcma_host_pci_switch_core(core);
+-	iowrite32(value, core->bus->mmio + offset);
 +	switch (reg_width) {
 +	case sizeof(u8):
 +		ioread8_rep(addr, buffer, count);
@@ -314,13 +1048,12 @@
 +	default:
 +		WARN_ON(1);
 +	}
-+}
+ }
 +#endif
-+
+ 
  static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
  {
- 	if (core->bus->mapped_core != core)
-@@ -87,6 +135,10 @@ const struct bcma_host_ops bcma_host_pci
+@@ -87,6 +146,10 @@ const struct bcma_host_ops bcma_host_pci
  	.write8		= bcma_host_pci_write8,
  	.write16	= bcma_host_pci_write16,
  	.write32	= bcma_host_pci_write32,
@@ -331,7 +1064,46 @@
  	.aread32	= bcma_host_pci_aread32,
  	.awrite32	= bcma_host_pci_awrite32,
  };
-@@ -175,6 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+@@ -171,10 +234,46 @@ static void bcma_host_pci_remove(struct
+ 	pci_set_drvdata(dev, NULL);
+ }
+ 
++#ifdef CONFIG_PM
++static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
++{
++	/* Host specific */
++	pci_save_state(dev);
++	pci_disable_device(dev);
++	pci_set_power_state(dev, pci_choose_state(dev, state));
++
++	return 0;
++}
++
++static int bcma_host_pci_resume(struct pci_dev *dev)
++{
++	struct bcma_bus *bus = pci_get_drvdata(dev);
++	int err;
++
++	/* Host specific */
++	pci_set_power_state(dev, 0);
++	err = pci_enable_device(dev);
++	if (err)
++		return err;
++	pci_restore_state(dev);
++
++	/* Bus specific */
++	err = bcma_bus_resume(bus);
++	if (err)
++		return err;
++
++	return 0;
++}
++#else /* CONFIG_PM */
++# define bcma_host_pci_suspend	NULL
++# define bcma_host_pci_resume	NULL
++#endif /* CONFIG_PM */
++
+ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
@@ -339,26 +1111,278 @@
  	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
  	{ 0, },
  };
+@@ -185,6 +284,8 @@ static struct pci_driver bcma_pci_bridge
+ 	.id_table = bcma_pci_bridge_tbl,
+ 	.probe = bcma_host_pci_probe,
+ 	.remove = bcma_host_pci_remove,
++	.suspend = bcma_host_pci_suspend,
++	.resume = bcma_host_pci_resume,
+ };
+ 
+ int __init bcma_host_pci_init(void)
+--- /dev/null
++++ b/drivers/bcma/host_soc.c
+@@ -0,0 +1,183 @@
++/*
++ * Broadcom specific AMBA
++ * System on Chip (SoC) Host
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include "scan.h"
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_soc.h>
++
++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
++{
++	return readb(core->io_addr + offset);
++}
++
++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
++{
++	return readw(core->io_addr + offset);
++}
++
++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
++{
++	return readl(core->io_addr + offset);
++}
++
++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
++				 u8 value)
++{
++	writeb(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
++				 u16 value)
++{
++	writew(value, core->io_addr + offset);
++}
++
++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
++				 u32 value)
++{
++	writel(value, core->io_addr + offset);
++}
++
++#ifdef CONFIG_BCMA_BLOCKIO
++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
++				     size_t count, u16 offset, u8 reg_width)
++{
++	void __iomem *addr = core->io_addr + offset;
++
++	switch (reg_width) {
++	case sizeof(u8): {
++		u8 *buf = buffer;
++
++		while (count) {
++			*buf = __raw_readb(addr);
++			buf++;
++			count--;
++		}
++		break;
++	}
++	case sizeof(u16): {
++		__le16 *buf = buffer;
++
++		WARN_ON(count & 1);
++		while (count) {
++			*buf = (__force __le16)__raw_readw(addr);
++			buf++;
++			count -= 2;
++		}
++		break;
++	}
++	case sizeof(u32): {
++		__le32 *buf = buffer;
++
++		WARN_ON(count & 3);
++		while (count) {
++			*buf = (__force __le32)__raw_readl(addr);
++			buf++;
++			count -= 4;
++		}
++		break;
++	}
++	default:
++		WARN_ON(1);
++	}
++}
++
++static void bcma_host_soc_block_write(struct bcma_device *core,
++				      const void *buffer,
++				      size_t count, u16 offset, u8 reg_width)
++{
++	void __iomem *addr = core->io_addr + offset;
++
++	switch (reg_width) {
++	case sizeof(u8): {
++		const u8 *buf = buffer;
++
++		while (count) {
++			__raw_writeb(*buf, addr);
++			buf++;
++			count--;
++		}
++		break;
++	}
++	case sizeof(u16): {
++		const __le16 *buf = buffer;
++
++		WARN_ON(count & 1);
++		while (count) {
++			__raw_writew((__force u16)(*buf), addr);
++			buf++;
++			count -= 2;
++		}
++		break;
++	}
++	case sizeof(u32): {
++		const __le32 *buf = buffer;
++
++		WARN_ON(count & 3);
++		while (count) {
++			__raw_writel((__force u32)(*buf), addr);
++			buf++;
++			count -= 4;
++		}
++		break;
++	}
++	default:
++		WARN_ON(1);
++	}
++}
++#endif /* CONFIG_BCMA_BLOCKIO */
++
++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
++{
++	return readl(core->io_wrap + offset);
++}
++
++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
++				  u32 value)
++{
++	writel(value, core->io_wrap + offset);
++}
++
++const struct bcma_host_ops bcma_host_soc_ops = {
++	.read8		= bcma_host_soc_read8,
++	.read16		= bcma_host_soc_read16,
++	.read32		= bcma_host_soc_read32,
++	.write8		= bcma_host_soc_write8,
++	.write16	= bcma_host_soc_write16,
++	.write32	= bcma_host_soc_write32,
++#ifdef CONFIG_BCMA_BLOCKIO
++	.block_read	= bcma_host_soc_block_read,
++	.block_write	= bcma_host_soc_block_write,
++#endif
++	.aread32	= bcma_host_soc_aread32,
++	.awrite32	= bcma_host_soc_awrite32,
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc)
++{
++	struct bcma_bus *bus = &soc->bus;
++	int err;
++
++	/* iomap only first core. We have to read some register on this core
++	 * to scan the bus.
++	 */
++	bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
++	if (!bus->mmio)
++		return -ENOMEM;
++
++	/* Host specific */
++	bus->hosttype = BCMA_HOSTTYPE_SOC;
++	bus->ops = &bcma_host_soc_ops;
++
++	/* Register */
++	err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
++	if (err)
++		iounmap(bus->mmio);
++
++	return err;
++}
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -7,6 +7,7 @@
+@@ -6,7 +6,9 @@
+  */
  
  #include "bcma_private.h"
++#include <linux/module.h>
  #include <linux/bcma/bcma.h>
 +#include <linux/slab.h>
  
  MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
  MODULE_LICENSE("GPL");
-@@ -89,6 +90,8 @@ static int bcma_register_cores(struct bc
+@@ -14,6 +16,7 @@ MODULE_LICENSE("GPL");
+ static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+ static int bcma_device_probe(struct device *dev);
+ static int bcma_device_remove(struct device *dev);
++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env);
+ 
+ static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+ {
+@@ -48,6 +51,7 @@ static struct bus_type bcma_bus_type = {
+ 	.match		= bcma_bus_match,
+ 	.probe		= bcma_device_probe,
+ 	.remove		= bcma_device_remove,
++	.uevent		= bcma_device_uevent,
+ 	.dev_attrs	= bcma_device_attrs,
+ };
+ 
+@@ -65,6 +69,10 @@ static struct bcma_device *bcma_find_cor
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++	if (core->io_addr)
++		iounmap(core->io_addr);
++	if (core->io_wrap)
++		iounmap(core->io_wrap);
+ 	kfree(core);
+ }
+ 
+@@ -79,6 +87,7 @@ static int bcma_register_cores(struct bc
+ 		case BCMA_CORE_CHIPCOMMON:
+ 		case BCMA_CORE_PCI:
+ 		case BCMA_CORE_PCIE:
++		case BCMA_CORE_MIPS_74K:
+ 			continue;
+ 		}
+ 
+@@ -89,8 +98,13 @@ static int bcma_register_cores(struct bc
  		switch (bus->hosttype) {
  		case BCMA_HOSTTYPE_PCI:
  			core->dev.parent = &bus->host_pci->dev;
 +			core->dma_dev = &bus->host_pci->dev;
 +			core->irq = bus->host_pci->irq;
++			break;
++		case BCMA_HOSTTYPE_SOC:
++			core->dev.dma_mask = &core->dev.coherent_dma_mask;
++			core->dma_dev = &core->dev;
  			break;
- 		case BCMA_HOSTTYPE_NONE:
+-		case BCMA_HOSTTYPE_NONE:
  		case BCMA_HOSTTYPE_SDIO:
-@@ -144,6 +147,15 @@ int bcma_bus_register(struct bcma_bus *b
+ 			break;
+ 		}
+@@ -137,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b
+ 		bcma_core_chipcommon_init(&bus->drv_cc);
+ 	}
+ 
++	/* Init MIPS core */
++	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++	if (core) {
++		bus->drv_mips.core = core;
++		bcma_core_mips_init(&bus->drv_mips);
++	}
++
+ 	/* Init PCIE core */
+ 	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ 	if (core) {
+@@ -144,6 +165,15 @@ int bcma_bus_register(struct bcma_bus *b
  		bcma_core_pci_init(&bus->drv_pci);
  	}
  
@@ -374,7 +1398,7 @@
  	/* Register found cores */
  	bcma_register_cores(bus);
  
-@@ -151,13 +163,11 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -151,13 +181,80 @@ int bcma_bus_register(struct bcma_bus *b
  
  	return 0;
  }
@@ -385,12 +1409,492 @@
  	bcma_unregister_cores(bus);
  }
 -EXPORT_SYMBOL_GPL(bcma_bus_unregister);
++
++int __init bcma_bus_early_register(struct bcma_bus *bus,
++				   struct bcma_device *core_cc,
++				   struct bcma_device *core_mips)
++{
++	int err;
++	struct bcma_device *core;
++	struct bcma_device_id match;
++
++	bcma_init_bus(bus);
++
++	match.manuf = BCMA_MANUF_BCM;
++	match.id = BCMA_CORE_CHIPCOMMON;
++	match.class = BCMA_CL_SIM;
++	match.rev = BCMA_ANY_REV;
++
++	/* Scan for chip common core */
++	err = bcma_bus_scan_early(bus, &match, core_cc);
++	if (err) {
++		pr_err("Failed to scan for common core: %d\n", err);
++		return -1;
++	}
++
++	match.manuf = BCMA_MANUF_MIPS;
++	match.id = BCMA_CORE_MIPS_74K;
++	match.class = BCMA_CL_SIM;
++	match.rev = BCMA_ANY_REV;
++
++	/* Scan for mips core */
++	err = bcma_bus_scan_early(bus, &match, core_mips);
++	if (err) {
++		pr_err("Failed to scan for mips core: %d\n", err);
++		return -1;
++	}
++
++	/* Init CC core */
++	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++	if (core) {
++		bus->drv_cc.core = core;
++		bcma_core_chipcommon_init(&bus->drv_cc);
++	}
++
++	/* Init MIPS core */
++	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++	if (core) {
++		bus->drv_mips.core = core;
++		bcma_core_mips_init(&bus->drv_mips);
++	}
++
++	pr_info("Early bus registered\n");
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++int bcma_bus_resume(struct bcma_bus *bus)
++{
++	struct bcma_device *core;
++
++	/* Init CC core */
++	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++	if (core) {
++		bus->drv_cc.setup_done = false;
++		bcma_core_chipcommon_init(&bus->drv_cc);
++	}
++
++	return 0;
++}
++#endif
  
  int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
  {
+@@ -217,6 +314,16 @@ static int bcma_device_remove(struct dev
+ 	return 0;
+ }
+ 
++static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env)
++{
++	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++
++	return add_uevent_var(env,
++			      "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X",
++			      core->id.manuf, core->id.id,
++			      core->id.rev, core->id.class);
++}
++
+ static int __init bcma_modinit(void)
+ {
+ 	int err;
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc
+ 	return addrl;
+ }
+ 
+-int bcma_bus_scan(struct bcma_bus *bus)
++static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
++						   u16 index)
+ {
+-	u32 erombase;
+-	u32 __iomem *eromptr, *eromend;
++	struct bcma_device *core;
+ 
++	list_for_each_entry(core, &bus->cores, list) {
++		if (core->core_index == index)
++			return core;
++	}
++	return NULL;
++}
++
++static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
++			      struct bcma_device_id *match, int core_num,
++			      struct bcma_device *core)
++{
++	s32 tmp;
++	u8 i, j;
+ 	s32 cia, cib;
+ 	u8 ports[2], wrappers[2];
+ 
++	/* get CIs */
++	cia = bcma_erom_get_ci(bus, eromptr);
++	if (cia < 0) {
++		bcma_erom_push_ent(eromptr);
++		if (bcma_erom_is_end(bus, eromptr))
++			return -ESPIPE;
++		return -EILSEQ;
++	}
++	cib = bcma_erom_get_ci(bus, eromptr);
++	if (cib < 0)
++		return -EILSEQ;
++
++	/* parse CIs */
++	core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
++	core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
++	core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
++	ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
++	ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
++	wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
++	wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
++	core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
++
++	if (((core->id.manuf == BCMA_MANUF_ARM) &&
++	     (core->id.id == 0xFFF)) ||
++	    (ports[1] == 0)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	/* check if component is a core at all */
++	if (wrappers[0] + wrappers[1] == 0) {
++		/* we could save addrl of the router
++		if (cid == BCMA_CORE_OOB_ROUTER)
++		 */
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	if (bcma_erom_is_bridge(bus, eromptr)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENXIO;
++	}
++
++	if (bcma_find_core_by_index(bus, core_num)) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENODEV;
++	}
++
++	if (match && ((match->manuf != BCMA_ANY_MANUF &&
++	      match->manuf != core->id.manuf) ||
++	     (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
++	     (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
++	     (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
++	    )) {
++		bcma_erom_skip_component(bus, eromptr);
++		return -ENODEV;
++	}
++
++	/* get & parse master ports */
++	for (i = 0; i < ports[0]; i++) {
++		s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
++		if (mst_port_d < 0)
++			return -EILSEQ;
++	}
++
++	/* get & parse slave ports */
++	for (i = 0; i < ports[1]; i++) {
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_SLAVE, i);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: slave port %d "
++				 * "has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (i == 0 && j == 0)
++					core->addr = tmp;
++			}
++		}
++	}
++
++	/* get & parse master wrappers */
++	for (i = 0; i < wrappers[0]; i++) {
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_MWRAP, i);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: master wrapper %d "
++				 * "has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (i == 0 && j == 0)
++					core->wrap = tmp;
++			}
++		}
++	}
++
++	/* get & parse slave wrappers */
++	for (i = 0; i < wrappers[1]; i++) {
++		u8 hack = (ports[1] == 1) ? 0 : 1;
++		for (j = 0; ; j++) {
++			tmp = bcma_erom_get_addr_desc(bus, eromptr,
++				SCAN_ADDR_TYPE_SWRAP, i + hack);
++			if (tmp < 0) {
++				/* no more entries for port _i_ */
++				/* pr_debug("erom: master wrapper %d "
++				 * has %d descriptors\n", i, j); */
++				break;
++			} else {
++				if (wrappers[0] == 0 && !i && !j)
++					core->wrap = tmp;
++			}
++		}
++	}
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
++		if (!core->io_addr)
++			return -ENOMEM;
++		core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
++		if (!core->io_wrap) {
++			iounmap(core->io_addr);
++			return -ENOMEM;
++		}
++	}
++	return 0;
++}
++
++void bcma_init_bus(struct bcma_bus *bus)
++{
+ 	s32 tmp;
+-	u8 i, j;
+ 
+-	int err;
++	if (bus->init_done)
++		return;
+ 
+ 	INIT_LIST_HEAD(&bus->cores);
+ 	bus->nr_cores = 0;
+@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ 	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ 	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++	bus->init_done = true;
++}
++
++int bcma_bus_scan(struct bcma_bus *bus)
++{
++	u32 erombase;
++	u32 __iomem *eromptr, *eromend;
++
++	int err, core_num = 0;
++
++	bcma_init_bus(bus);
+ 
+ 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+-	eromptr = bus->mmio;
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
++		if (!eromptr)
++			return -ENOMEM;
++	} else {
++		eromptr = bus->mmio;
++	}
++
+ 	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+ 
+ 	bcma_scan_switch_core(bus, erombase);
+@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ 		INIT_LIST_HEAD(&core->list);
+ 		core->bus = bus;
+ 
+-		/* get CIs */
+-		cia = bcma_erom_get_ci(bus, &eromptr);
+-		if (cia < 0) {
+-			bcma_erom_push_ent(&eromptr);
+-			if (bcma_erom_is_end(bus, &eromptr))
+-				break;
+-			err= -EILSEQ;
+-			goto out;
+-		}
+-		cib = bcma_erom_get_ci(bus, &eromptr);
+-		if (cib < 0) {
+-			err= -EILSEQ;
+-			goto out;
+-		}
+-
+-		/* parse CIs */
+-		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+-		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+-		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+-		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+-		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+-		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+-		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+-		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+-
+-		if (((core->id.manuf == BCMA_MANUF_ARM) &&
+-		     (core->id.id == 0xFFF)) ||
+-		    (ports[1] == 0)) {
+-			bcma_erom_skip_component(bus, &eromptr);
++		err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
++		if (err == -ENODEV) {
++			core_num++;
+ 			continue;
+-		}
+-
+-		/* check if component is a core at all */
+-		if (wrappers[0] + wrappers[1] == 0) {
+-			/* we could save addrl of the router
+-			if (cid == BCMA_CORE_OOB_ROUTER)
+-			 */
+-			bcma_erom_skip_component(bus, &eromptr);
++		} else if (err == -ENXIO)
+ 			continue;
+-		}
++		else if (err == -ESPIPE)
++			break;
++		else if (err < 0)
++			return err;
+ 
+-		if (bcma_erom_is_bridge(bus, &eromptr)) {
+-			bcma_erom_skip_component(bus, &eromptr);
+-			continue;
+-		}
++		core->core_index = core_num++;
++		bus->nr_cores++;
+ 
+-		/* get & parse master ports */
+-		for (i = 0; i < ports[0]; i++) {
+-			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+-			if (mst_port_d < 0) {
+-				err= -EILSEQ;
+-				goto out;
+-			}
+-		}
++		pr_info("Core %d found: %s "
++			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++			core->core_index, bcma_device_name(&core->id),
++			core->id.manuf, core->id.id, core->id.rev,
++			core->id.class);
+ 
+-		/* get & parse slave ports */
+-		for (i = 0; i < ports[1]; i++) {
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_SLAVE, i);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: slave port %d "
+-					 * "has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (i == 0 && j == 0)
+-						core->addr = tmp;
+-				}
+-			}
+-		}
++		list_add(&core->list, &bus->cores);
++	}
+ 
+-		/* get & parse master wrappers */
+-		for (i = 0; i < wrappers[0]; i++) {
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_MWRAP, i);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: master wrapper %d "
+-					 * "has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (i == 0 && j == 0)
+-						core->wrap = tmp;
+-				}
+-			}
+-		}
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
++		iounmap(eromptr);
+ 
+-		/* get & parse slave wrappers */
+-		for (i = 0; i < wrappers[1]; i++) {
+-			u8 hack = (ports[1] == 1) ? 0 : 1;
+-			for (j = 0; ; j++) {
+-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+-					SCAN_ADDR_TYPE_SWRAP, i + hack);
+-				if (tmp < 0) {
+-					/* no more entries for port _i_ */
+-					/* pr_debug("erom: master wrapper %d "
+-					 * has %d descriptors\n", i, j); */
+-					break;
+-				} else {
+-					if (wrappers[0] == 0 && !i && !j)
+-						core->wrap = tmp;
+-				}
+-			}
+-		}
++	return 0;
++}
++
++int __init bcma_bus_scan_early(struct bcma_bus *bus,
++			       struct bcma_device_id *match,
++			       struct bcma_device *core)
++{
++	u32 erombase;
++	u32 __iomem *eromptr, *eromend;
+ 
++	int err = -ENODEV;
++	int core_num = 0;
++
++	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
++		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
++		if (!eromptr)
++			return -ENOMEM;
++	} else {
++		eromptr = bus->mmio;
++	}
++
++	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
++
++	bcma_scan_switch_core(bus, erombase);
++
++	while (eromptr < eromend) {
++		memset(core, 0, sizeof(*core));
++		INIT_LIST_HEAD(&core->list);
++		core->bus = bus;
++
++		err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
++		if (err == -ENODEV) {
++			core_num++;
++			continue;
++		} else if (err == -ENXIO)
++			continue;
++		else if (err == -ESPIPE)
++			break;
++		else if (err < 0)
++			return err;
++
++		core->core_index = core_num++;
++		bus->nr_cores++;
+ 		pr_info("Core %d found: %s "
+ 			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+-			bus->nr_cores, bcma_device_name(&core->id),
++			core->core_index, bcma_device_name(&core->id),
+ 			core->id.manuf, core->id.id, core->id.rev,
+ 			core->id.class);
+ 
+-		core->core_index = bus->nr_cores++;
+ 		list_add(&core->list, &bus->cores);
+-		continue;
+-out:
+-		return err;
++		err = 0;
++		break;
+ 	}
+ 
+-	return 0;
++	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
++		iounmap(eromptr);
++
++	return err;
+ }
 --- /dev/null
 +++ b/drivers/bcma/sprom.c
-@@ -0,0 +1,171 @@
+@@ -0,0 +1,247 @@
 +/*
 + * Broadcom specific AMBA
 + * SPROM reading
@@ -522,10 +2026,80 @@
 +	u16 v;
 +	int i;
 +
++	bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
++		SSB_SPROM_REVISION_REV;
++
 +	for (i = 0; i < 3; i++) {
 +		v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
 +		*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
 +	}
++
++	bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
++
++	bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
++	     SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
++	bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
++	     SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
++	bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
++	     SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
++	bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
++	     SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
++
++	bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
++	     SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
++	bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
++	     SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
++	bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
++	     SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
++	bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
++	     SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
++
++	bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
++	     SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
++	bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
++	     SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
++	bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
++	     SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
++	bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
++	     SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
++
++	bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
++	     SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
++	bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
++	     SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
++	bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
++	     SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
++	bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
++	     SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
++
++	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
++	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
++	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
++	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
++
++	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
++
++	bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
++		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
++	bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
++		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
++	bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
++		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
++	bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
++		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
++	bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
++		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
++	bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
++		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
++	bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
++		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
++	bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
++		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
++	bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
++		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
++	bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
++		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
 +}
 +
 +int bcma_sprom_get(struct bcma_bus *bus)
@@ -545,6 +2119,9 @@
 +	if (!sprom)
 +		return -ENOMEM;
 +
++	if (bus->chipinfo.id == 0x4331)
++		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
++
 +	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
 +	 * According to brcm80211 this applies to cards with PCIe rev >= 6
 +	 * TODO: understand this condition and use it */
@@ -552,6 +2129,9 @@
 +		BCMA_CC_SPROM_PCIE6;
 +	bcma_sprom_read(bus, offset, sprom);
 +
++	if (bus->chipinfo.id == 0x4331)
++		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++
 +	err = bcma_sprom_valid(sprom);
 +	if (err)
 +		goto out;
@@ -564,15 +2144,27 @@
 +}
 --- a/include/linux/bcma/bcma.h
 +++ b/include/linux/bcma/bcma.h
-@@ -6,6 +6,7 @@
+@@ -6,6 +6,8 @@
  
  #include <linux/bcma/bcma_driver_chipcommon.h>
  #include <linux/bcma/bcma_driver_pci.h>
++#include <linux/bcma/bcma_driver_mips.h>
 +#include <linux/ssb/ssb.h> /* SPROM sharing */
  
  #include "bcma_regs.h"
  
-@@ -24,6 +25,11 @@ struct bcma_chipinfo {
+@@ -13,9 +15,9 @@ struct bcma_device;
+ struct bcma_bus;
+ 
+ enum bcma_hosttype {
+-	BCMA_HOSTTYPE_NONE,
+ 	BCMA_HOSTTYPE_PCI,
+ 	BCMA_HOSTTYPE_SDIO,
++	BCMA_HOSTTYPE_SOC,
+ };
+ 
+ struct bcma_chipinfo {
+@@ -24,6 +26,11 @@ struct bcma_chipinfo {
  	u8 pkg;
  };
  
@@ -584,7 +2176,7 @@
  struct bcma_host_ops {
  	u8 (*read8)(struct bcma_device *core, u16 offset);
  	u16 (*read16)(struct bcma_device *core, u16 offset);
-@@ -31,6 +37,12 @@ struct bcma_host_ops {
+@@ -31,6 +38,12 @@ struct bcma_host_ops {
  	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
  	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
  	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
@@ -597,55 +2189,139 @@
  	/* Agent ops */
  	u32 (*aread32)(struct bcma_device *core, u16 offset);
  	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
-@@ -117,6 +129,8 @@ struct bcma_device {
+@@ -117,6 +130,9 @@ struct bcma_device {
  	struct bcma_device_id id;
  
  	struct device dev;
 +	struct device *dma_dev;
++
 +	unsigned int irq;
  	bool dev_registered;
  
  	u8 core_index;
-@@ -179,6 +193,10 @@ struct bcma_bus {
+@@ -124,6 +140,9 @@ struct bcma_device {
+ 	u32 addr;
+ 	u32 wrap;
+ 
++	void __iomem *io_addr;
++	void __iomem *io_wrap;
++
+ 	void *drvdata;
+ 	struct list_head list;
+ };
+@@ -151,10 +170,9 @@ struct bcma_driver {
+ };
+ extern
+ int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+-static inline int bcma_driver_register(struct bcma_driver *drv)
+-{
+-	return __bcma_driver_register(drv, THIS_MODULE);
+-}
++#define bcma_driver_register(drv) \
++	__bcma_driver_register(drv, THIS_MODULE)
++
+ extern void bcma_driver_unregister(struct bcma_driver *drv);
+ 
+ struct bcma_bus {
+@@ -176,49 +194,105 @@ struct bcma_bus {
+ 	struct bcma_device *mapped_core;
+ 	struct list_head cores;
+ 	u8 nr_cores;
++	u8 init_done:1;
  
  	struct bcma_drv_cc drv_cc;
  	struct bcma_drv_pci drv_pci;
++	struct bcma_drv_mips drv_mips;
 +
 +	/* We decided to share SPROM struct with SSB as long as we do not need
 +	 * any hacks for BCMA. This simplifies drivers code. */
 +	struct ssb_sprom sprom;
  };
  
- extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
-@@ -208,6 +226,18 @@ void bcma_write32(struct bcma_device *co
+-extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
++static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+ {
+ 	return core->bus->ops->read8(core, offset);
+ }
+-extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
++static inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+ {
+ 	return core->bus->ops->read16(core, offset);
+ }
+-extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
++static inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+ {
+ 	return core->bus->ops->read32(core, offset);
+ }
+-extern inline
++static inline
+ void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+ {
+ 	core->bus->ops->write8(core, offset, value);
+ }
+-extern inline
++static inline
+ void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+ {
+ 	core->bus->ops->write16(core, offset, value);
+ }
+-extern inline
++static inline
+ void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
  {
  	core->bus->ops->write32(core, offset, value);
  }
+-extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
 +#ifdef CONFIG_BCMA_BLOCKIO
-+extern inline void bcma_block_read(struct bcma_device *core, void *buffer,
++static inline void bcma_block_read(struct bcma_device *core, void *buffer,
 +				   size_t count, u16 offset, u8 reg_width)
 +{
 +	core->bus->ops->block_read(core, buffer, count, offset, reg_width);
 +}
-+extern inline void bcma_block_write(struct bcma_device *core, const void *buffer,
-+				    size_t count, u16 offset, u8 reg_width)
++static inline void bcma_block_write(struct bcma_device *core,
++				    const void *buffer, size_t count,
++				    u16 offset, u8 reg_width)
 +{
 +	core->bus->ops->block_write(core, buffer, count, offset, reg_width);
 +}
 +#endif
- extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
++static inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
  {
  	return core->bus->ops->aread32(core, offset);
-@@ -218,7 +248,24 @@ void bcma_awrite32(struct bcma_device *c
+ }
+-extern inline
++static inline
+ void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+ {
  	core->bus->ops->awrite32(core, offset, value);
  }
  
-+#define bcma_mask32(cc, offset, mask) \
-+	bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask))
-+#define bcma_set32(cc, offset, set) \
-+	bcma_write32(cc, offset, bcma_read32(cc, offset) | (set))
-+#define bcma_maskset32(cc, offset, mask, set) \
-+	bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set))
++static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask)
++{
++	bcma_write32(cc, offset, bcma_read32(cc, offset) & mask);
++}
++static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set)
++{
++	bcma_write32(cc, offset, bcma_read32(cc, offset) | set);
++}
++static inline void bcma_maskset32(struct bcma_device *cc,
++				  u16 offset, u32 mask, u32 set)
++{
++	bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set);
++}
++static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask)
++{
++	bcma_write16(cc, offset, bcma_read16(cc, offset) & mask);
++}
++static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set)
++{
++	bcma_write16(cc, offset, bcma_read16(cc, offset) | set);
++}
++static inline void bcma_maskset16(struct bcma_device *cc,
++				  u16 offset, u16 mask, u16 set)
++{
++	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
++}
 +
  extern bool bcma_core_is_enabled(struct bcma_device *core);
 +extern void bcma_core_disable(struct bcma_device *core, u32 flags);
@@ -663,9 +2339,19 @@
  #endif /* LINUX_BCMA_H_ */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -179,15 +179,7 @@
+@@ -24,6 +24,7 @@
+ #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+ #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+ #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
++#define   BCMA_CC_FLASHT_NFLASH		0x00000200
+ #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+ #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+ #define   BCMA_PLLTYPE_NONE		0x00000000
+@@ -178,16 +179,9 @@
+ #define BCMA_CC_PROG_CFG		0x0120
  #define BCMA_CC_PROG_WAITCNT		0x0124
  #define BCMA_CC_FLASH_CFG		0x0128
++#define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
  #define BCMA_CC_FLASH_WAITCNT		0x012C
 -#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
 -#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
@@ -680,15 +2366,196 @@
  #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
  #define BCMA_CC_UART0_DATA		0x0300
  #define BCMA_CC_UART0_IMR		0x0304
-@@ -244,6 +236,8 @@
+@@ -209,6 +203,7 @@
+ #define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+ #define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+ #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
++#define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
+ #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+ #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+ #define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+@@ -244,6 +239,66 @@
  #define BCMA_CC_REGCTL_DATA		0x065C
  #define BCMA_CC_PLLCTL_ADDR		0x0660
  #define BCMA_CC_PLLCTL_DATA		0x0664
 +#define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
 +#define BCMA_CC_SPROM_PCIE6		0x0830 /* SPROM beginning on PCIe rev >= 6 */
++
++/* Divider allocation in 4716/47162/5356 */
++#define BCMA_CC_PMU5_MAINPLL_CPU	1
++#define BCMA_CC_PMU5_MAINPLL_MEM	2
++#define BCMA_CC_PMU5_MAINPLL_SSB	3
++
++/* PLL usage in 4716/47162 */
++#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
++
++/* PLL usage in 5356/5357 */
++#define BCMA_CC_PMU5356_MAINPLL_PLL0	0
++#define BCMA_CC_PMU5357_MAINPLL_PLL0	0
++
++/* 4706 PMU */
++#define BCMA_CC_PMU4706_MAINPLL_PLL0	0
++
++/* ALP clock on pre-PMU chips */
++#define BCMA_CC_PMU_ALP_CLOCK		20000000
++/* HT clock for systems with PMU-enabled chipcommon */
++#define BCMA_CC_PMU_HT_CLOCK		80000000
++
++/* PMU rev 5 (& 6) */
++#define BCMA_CC_PPL_P1P2_OFF		0
++#define BCMA_CC_PPL_P1_MASK		0x0f000000
++#define BCMA_CC_PPL_P1_SHIFT		24
++#define BCMA_CC_PPL_P2_MASK		0x00f00000
++#define BCMA_CC_PPL_P2_SHIFT		20
++#define BCMA_CC_PPL_M14_OFF		1
++#define BCMA_CC_PPL_MDIV_MASK		0x000000ff
++#define BCMA_CC_PPL_MDIV_WIDTH		8
++#define BCMA_CC_PPL_NM5_OFF		2
++#define BCMA_CC_PPL_NDIV_MASK		0xfff00000
++#define BCMA_CC_PPL_NDIV_SHIFT		20
++#define BCMA_CC_PPL_FMAB_OFF		3
++#define BCMA_CC_PPL_MRAT_MASK		0xf0000000
++#define BCMA_CC_PPL_MRAT_SHIFT		28
++#define BCMA_CC_PPL_ABRAT_MASK		0x08000000
++#define BCMA_CC_PPL_ABRAT_SHIFT		27
++#define BCMA_CC_PPL_FDIV_MASK		0x07ffffff
++#define BCMA_CC_PPL_PLLCTL_OFF		4
++#define BCMA_CC_PPL_PCHI_OFF		5
++#define BCMA_CC_PPL_PCHI_MASK		0x0000003f
++
++/* BCM4331 ChipControl numbers. */
++#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
++#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
++#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
++#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
++#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
++#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
++#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
++#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
++#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
++#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
++#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
++#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
++#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
  
  /* Data for the PMU, if available.
   * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+@@ -253,14 +308,37 @@ struct bcma_chipcommon_pmu {
+ 	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+ };
+ 
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++struct bcma_pflash {
++	u8 buswidth;
++	u32 window;
++	u32 window_size;
++};
++
++struct bcma_serial_port {
++	void *regs;
++	unsigned long clockspeed;
++	unsigned int irq;
++	unsigned int baud_base;
++	unsigned int reg_shift;
++};
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++
+ struct bcma_drv_cc {
+ 	struct bcma_device *core;
+ 	u32 status;
+ 	u32 capabilities;
+ 	u32 capabilities_ext;
++	u8 setup_done:1;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct bcma_chipcommon_pmu pmu;
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++	struct bcma_pflash pflash;
++
++	int nr_serial_ports;
++	struct bcma_serial_port serial_ports[4];
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
+ };
+ 
+ /* Register access */
+@@ -281,6 +359,8 @@ extern void bcma_core_chipcommon_init(st
+ extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+ extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+ 
++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
++
+ extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+ 					  u32 ticks);
+ 
+@@ -299,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm
+ /* PMU support */
+ extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+ 
++extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
++				  u32 value);
++extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
++				    u32 mask, u32 set);
++extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
++					u32 offset, u32 mask, u32 set);
++extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
++				       u32 offset, u32 mask, u32 set);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -0,0 +1,51 @@
++#ifndef LINUX_BCMA_DRIVER_MIPS_H_
++#define LINUX_BCMA_DRIVER_MIPS_H_
++
++#define BCMA_MIPS_IPSFLAG		0x0F08
++/* which sbflags get routed to mips interrupt 1 */
++#define  BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
++#define  BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
++/* which sbflags get routed to mips interrupt 2 */
++#define  BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
++#define  BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
++/* which sbflags get routed to mips interrupt 3 */
++#define  BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
++#define  BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
++/* which sbflags get routed to mips interrupt 4 */
++#define  BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
++#define  BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
++
++/* MIPS 74K core registers */
++#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
++#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
++#define BCMA_MIPS_MIPS74K_BIST		0x000C
++#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
++#define BCMA_MIPS_MIPS74K_INTMASK(int) \
++	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
++#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
++#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
++#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
++#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
++#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
++
++#define BCMA_MIPS_OOBSELOUTA30		0x100
++
++struct bcma_device;
++
++struct bcma_drv_mips {
++	struct bcma_device *core;
++	u8 setup_done:1;
++	unsigned int assigned_irqs;
++};
++
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
++#else
++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
++#endif
++
++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
++
++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
 --- a/include/linux/bcma/bcma_driver_pci.h
 +++ b/include/linux/bcma/bcma_driver_pci.h
 @@ -85,5 +85,7 @@ struct bcma_drv_pci {
@@ -699,53 +2566,6 @@
 +				 struct bcma_device *core, bool enable);
  
  #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked
- 
- void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
- {
-+	u32 leddc_on = 10;
-+	u32 leddc_off = 90;
-+
- 	if (cc->core->id.rev >= 11)
- 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
- 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
-@@ -38,6 +41,17 @@ void bcma_core_chipcommon_init(struct bc
- 		bcma_pmu_init(cc);
- 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
- 		pr_err("Power control not implemented!\n");
-+
-+	if (cc->core->id.rev >= 16) {
-+		if (cc->core->bus->sprom.leddc_on_time &&
-+		    cc->core->bus->sprom.leddc_off_time) {
-+			leddc_on = cc->core->bus->sprom.leddc_on_time;
-+			leddc_off = cc->core->bus->sprom.leddc_off_time;
-+		}
-+		bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
-+			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
-+			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
-+	}
- }
- 
- /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
---- /dev/null
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -0,0 +1,14 @@
-+/*
-+ * Broadcom specific AMBA
-+ * PCI Core in hostmode
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include "bcma_private.h"
-+#include <linux/bcma/bcma.h>
-+
-+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
-+{
-+	pr_err("No support for PCI core in hostmode yet\n");
-+}
 --- a/include/linux/bcma/bcma_regs.h
 +++ b/include/linux/bcma/bcma_regs.h
 @@ -1,13 +1,38 @@
@@ -788,3 +2608,22 @@
  #define BCMA_RESET_CTL			0x0800
  #define  BCMA_RESET_CTL_RESET		0x0001
  
+--- /dev/null
++++ b/include/linux/bcma/bcma_soc.h
+@@ -0,0 +1,16 @@
++#ifndef LINUX_BCMA_SOC_H_
++#define LINUX_BCMA_SOC_H_
++
++#include <linux/bcma/bcma.h>
++
++struct bcma_soc {
++	struct bcma_bus bus;
++	struct bcma_device core_cc;
++	struct bcma_device core_mips;
++};
++
++int __init bcma_host_soc_register(struct bcma_soc *soc);
++
++int bcma_bus_register(struct bcma_bus *bus);
++
++#endif /* LINUX_BCMA_SOC_H_ */