kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing

SVN-Revision: 31278

1 files changed, 388 insertions, 109 deletions

diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
index 0564fa3c76..c5492d3e96 100644
--- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
@@ -164,8 +164,49 @@
   * Copyright 2007, Broadcom Corporation
   *
   * Licensed under the GNU/GPL. See COPYING for details.
-@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -12,6 +12,9 @@
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_chipcommon.h>
+ #include <linux/delay.h>
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
++#endif
+ 
+ #include "ssb_private.h"
+ 
+@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 	u32 pmuctl, tmp, pllctl;
+ 	unsigned int i;
+ 
+-	if ((bus->chip_id == 0x5354) && !crystalfreq) {
+-		/* The 5354 crystal freq is 25MHz */
+-		crystalfreq = 25000;
+-	}
+ 	if (crystalfreq)
+ 		e = pmu0_plltab_find_entry(crystalfreq);
+ 	if (!e)
+@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+ 
+ 	if (bus->bustype == SSB_BUSTYPE_SSB) {
+-		/* TODO: The user may override the crystal frequency. */
++#ifdef CONFIG_BCM47XX
++		char buf[20];
++		if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
++			crystalfreq = simple_strtoul(buf, NULL, 0);
++#endif
+ 	}
+ 
+ 	switch (bus->chip_id) {
+@@ -329,9 +332,19 @@ static void ssb_pmu_pll_init(struct ssb_
+ 		ssb_pmu1_pllinit_r0(cc, crystalfreq);
+ 		break;
+ 	case 0x4328:
++		ssb_pmu0_pllinit_r0(cc, crystalfreq);
++		break;
  	case 0x5354:
++		if (crystalfreq == 0)
++			crystalfreq = 25000;
  		ssb_pmu0_pllinit_r0(cc, crystalfreq);
  		break;
 +	case 0x4322:
@@ -177,7 +218,7 @@
  	default:
  		ssb_printk(KERN_ERR PFX
  			   "ERROR: PLL init unknown for device %04X\n",
-@@ -411,12 +417,15 @@ static void ssb_pmu_resources_init(struc
+@@ -411,12 +424,15 @@ static void ssb_pmu_resources_init(struc
  	u32 min_msk = 0, max_msk = 0;
  	unsigned int i;
  	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
@@ -195,7 +236,7 @@
  		/* We keep the default settings:
  		 * min_msk = 0xCBB
  		 * max_msk = 0x7FFFF
-@@ -495,9 +504,9 @@ static void ssb_pmu_resources_init(struc
+@@ -495,9 +511,9 @@ static void ssb_pmu_resources_init(struc
  		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
  }
  
@@ -206,7 +247,7 @@
  	u32 pmucap;
  
  	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -509,15 +525,12 @@ void ssb_pmu_init(struct ssb_chipcommon
  	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
  		    cc->pmu.rev, pmucap);
  
@@ -228,6 +269,41 @@
  	ssb_pmu_pll_init(cc);
  	ssb_pmu_resources_init(cc);
  }
+@@ -600,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+ 
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
++
++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x5354:
++		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
++		return 240000000;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "ERROR: PMU cpu clock unknown for device %04X\n",
++			   bus->chip_id);
++		return 0;
++	}
++}
++
++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x5354:
++		return 120000000;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "ERROR: PMU controlclock unknown for device %04X\n",
++			   bus->chip_id);
++		return 0;
++	}
++}
 --- a/drivers/ssb/driver_gige.c
 +++ b/drivers/ssb/driver_gige.c
 @@ -3,7 +3,7 @@
@@ -292,7 +368,17 @@
   *
   * Licensed under the GNU/GPL. See COPYING for details.
   */
-@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ 	struct ssb_bus *bus = mcore->dev->bus;
+ 	u32 pll_type, n, m, rate = 0;
+ 
++	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++		return ssb_pmu_get_cpu_clock(&bus->chipco);
++
+ 	if (bus->extif.dev) {
+ 		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+ 	} else if (bus->chipco.dev) {
+@@ -270,7 +273,6 @@ void ssb_mipscore_init(struct ssb_mipsco
  				set_irq(dev, irq++);
  			}
  			break;
@@ -300,7 +386,7 @@
  		case SSB_DEV_PCI:
  		case SSB_DEV_ETHERNET:
  		case SSB_DEV_ETHERNET_GBIT:
-@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -281,6 +283,10 @@ void ssb_mipscore_init(struct ssb_mipsco
  				set_irq(dev, irq++);
  				break;
  			}
@@ -334,6 +420,15 @@
  
  static inline
  u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_
+ 	u32 tmp;
+ 
+ 	/* We do only have one cardbus device behind the bridge. */
+-	if (pc->cardbusmode && (dev >= 1))
++	if (pc->cardbusmode && (dev > 1))
+ 		goto out;
+ 
+ 	if (bus == 0) {
 @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore
  	.pci_ops	= &ssb_pcicore_pciops,
  	.io_resource	= &ssb_pcicore_io_resource,
@@ -767,27 +862,7 @@
  
  #include <pcmcia/cs_types.h>
  #include <pcmcia/cs.h>
-@@ -140,6 +142,19 @@ static void ssb_device_put(struct ssb_de
- 		put_device(dev->dev);
- }
- 
-+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
-+{
-+	if (drv)
-+		get_driver(&drv->drv);
-+	return drv;
-+}
-+
-+static inline void ssb_driver_put(struct ssb_driver *drv)
-+{
-+	if (drv)
-+		put_driver(&drv->drv);
-+}
-+
- static int ssb_device_resume(struct device *dev)
- {
- 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
-@@ -210,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+@@ -210,90 +212,78 @@ int ssb_bus_suspend(struct ssb_bus *bus)
  EXPORT_SYMBOL(ssb_bus_suspend);
  
  #ifdef CONFIG_SSB_SPROM
@@ -842,19 +917,18 @@
 -		if (!dev->dev ||
 -		    !dev->dev->driver ||
 -		    !device_is_registered(dev->dev))
-+		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
-+		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
-+			ssb_device_put(sdev);
- 			continue;
+-			continue;
 -		drv = drv_to_ssb_drv(dev->dev->driver);
 -		if (!drv)
--			continue;
++		sdrv = drv_to_ssb_drv(sdev->dev->driver);
++		if (SSB_WARN_ON(!sdrv->remove))
+ 			continue;
 -		err = drv->suspend(dev, state);
 -		if (err) {
 -			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 -				   dev_name(dev->dev));
 -			goto err_unwind;
- 		}
+-		}
 +		sdrv->remove(sdev);
 +		ctx->device_frozen[i] = 1;
  	}
@@ -921,7 +995,6 @@
 +				   dev_name(sdev->dev));
 +			result = err;
  		}
-+		ssb_driver_put(sdrv);
 +		ssb_device_put(sdev);
  	}
  
@@ -930,7 +1003,7 @@
  }
  #endif /* CONFIG_SSB_SPROM */
  
-@@ -380,6 +386,35 @@ static int ssb_device_uevent(struct devi
+@@ -380,6 +370,35 @@ static int ssb_device_uevent(struct devi
  			     ssb_dev->id.revision);
  }
  
@@ -966,7 +1039,7 @@
  static struct bus_type ssb_bustype = {
  	.name		= "ssb",
  	.match		= ssb_bus_match,
-@@ -389,6 +424,7 @@ static struct bus_type ssb_bustype = {
+@@ -389,6 +408,7 @@ static struct bus_type ssb_bustype = {
  	.suspend	= ssb_device_suspend,
  	.resume		= ssb_device_resume,
  	.uevent		= ssb_device_uevent,
@@ -974,7 +1047,7 @@
  };
  
  static void ssb_buses_lock(void)
-@@ -481,6 +517,7 @@ static int ssb_devices_register(struct s
+@@ -481,6 +501,7 @@ static int ssb_devices_register(struct s
  #ifdef CONFIG_SSB_PCIHOST
  			sdev->irq = bus->host_pci->irq;
  			dev->parent = &bus->host_pci->dev;
@@ -982,7 +1055,7 @@
  #endif
  			break;
  		case SSB_BUSTYPE_PCMCIA:
-@@ -490,13 +527,13 @@ static int ssb_devices_register(struct s
+@@ -490,13 +511,13 @@ static int ssb_devices_register(struct s
  #endif
  			break;
  		case SSB_BUSTYPE_SDIO:
@@ -998,7 +1071,7 @@
  			break;
  		}
  
-@@ -523,7 +560,7 @@ error:
+@@ -523,7 +544,7 @@ error:
  }
  
  /* Needs ssb_buses_lock() */
@@ -1007,7 +1080,7 @@
  {
  	struct ssb_bus *bus, *n;
  	int err = 0;
-@@ -734,9 +771,9 @@ out:
+@@ -734,9 +755,9 @@ out:
  	return err;
  }
  
@@ -1020,7 +1093,7 @@
  {
  	int err;
  
-@@ -817,8 +854,8 @@ err_disable_xtal:
+@@ -817,8 +838,8 @@ err_disable_xtal:
  }
  
  #ifdef CONFIG_SSB_PCIHOST
@@ -1031,7 +1104,7 @@
  {
  	int err;
  
-@@ -830,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+@@ -830,6 +851,9 @@ int ssb_bus_pcibus_register(struct ssb_b
  	if (!err) {
  		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
  			   "PCI device %s\n", dev_name(&host_pci->dev));
@@ -1041,7 +1114,7 @@
  	}
  
  	return err;
-@@ -838,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+@@ -838,9 +862,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
  #endif /* CONFIG_SSB_PCIHOST */
  
  #ifdef CONFIG_SSB_PCMCIAHOST
@@ -1054,7 +1127,7 @@
  {
  	int err;
  
-@@ -860,8 +900,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
+@@ -860,8 +884,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
  #endif /* CONFIG_SSB_PCMCIAHOST */
  
  #ifdef CONFIG_SSB_SDIOHOST
@@ -1066,7 +1139,7 @@
  {
  	int err;
  
-@@ -881,9 +922,9 @@ int ssb_bus_sdiobus_register(struct ssb_
+@@ -881,9 +906,9 @@ int ssb_bus_sdiobus_register(struct ssb_
  EXPORT_SYMBOL(ssb_bus_sdiobus_register);
  #endif /* CONFIG_SSB_PCMCIAHOST */
  
@@ -1079,7 +1152,7 @@
  {
  	int err;
  
-@@ -964,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+@@ -964,8 +989,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
  	switch (plltype) {
  	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
  		if (m & SSB_CHIPCO_CLK_T6_MMASK)
@@ -1090,7 +1163,17 @@
  	case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
  	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
  	case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
-@@ -1080,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -1055,6 +1080,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+ 	u32 plltype;
+ 	u32 clkctl_n, clkctl_m;
+ 
++	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++		return ssb_pmu_get_controlclock(&bus->chipco);
++
+ 	if (ssb_extif_available(&bus->extif))
+ 		ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+ 					   &clkctl_n, &clkctl_m);
+@@ -1080,23 +1108,22 @@ static u32 ssb_tmslow_reject_bitmask(str
  {
  	u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
  
@@ -1121,7 +1204,7 @@
  }
  
  int ssb_device_is_enabled(struct ssb_device *dev)
-@@ -1155,10 +1195,10 @@ void ssb_device_enable(struct ssb_device
+@@ -1155,10 +1182,10 @@ void ssb_device_enable(struct ssb_device
  }
  EXPORT_SYMBOL(ssb_device_enable);
  
@@ -1135,7 +1218,7 @@
  {
  	int i;
  	u32 val;
-@@ -1166,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1166,7 +1193,7 @@ static int ssb_wait_bit(struct ssb_devic
  	for (i = 0; i < timeout; i++) {
  		val = ssb_read32(dev, reg);
  		if (set) {
@@ -1144,7 +1227,7 @@
  				return 0;
  		} else {
  			if (!(val & bitmask))
-@@ -1183,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1183,20 +1210,38 @@ static int ssb_wait_bit(struct ssb_devic
  
  void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
  {
@@ -1192,7 +1275,7 @@
  
  	ssb_write32(dev, SSB_TMSLOW,
  		    reject | SSB_TMSLOW_RESET |
-@@ -1205,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic
+@@ -1205,13 +1250,34 @@ void ssb_device_disable(struct ssb_devic
  }
  EXPORT_SYMBOL(ssb_device_disable);
  
@@ -1228,7 +1311,7 @@
  	default:
  		__ssb_dma_not_implemented(dev);
  	}
-@@ -1328,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1328,20 +1394,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
  
  int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
  {
@@ -1253,7 +1336,7 @@
  	return 0;
  error:
  	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
-@@ -1349,6 +1428,37 @@ error:
+@@ -1349,6 +1415,37 @@ error:
  }
  EXPORT_SYMBOL(ssb_bus_powerup);
  
@@ -1319,10 +1402,40 @@
  /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
  #define SPEX16(_outvar, _offset, _mask, _shift)	\
  	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-@@ -405,6 +406,46 @@ static void sprom_extract_r123(struct ss
- 	out->antenna_gain.ghz5.a3 = gain;
- }
- 
+@@ -330,7 +331,6 @@ static void sprom_extract_r123(struct ss
+ {
+ 	int i;
+ 	u16 v;
+-	s8 gain;
+ 	u16 loc[3];
+ 
+ 	if (out->revision == 3)			/* rev 3 moved MAC */
+@@ -389,20 +389,52 @@ static void sprom_extract_r123(struct ss
+ 		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+ 
+ 	/* Extract the antenna gain values. */
+-	gain = r123_extract_antgain(out->revision, in,
+-				    SSB_SPROM1_AGAIN_BG,
+-				    SSB_SPROM1_AGAIN_BG_SHIFT);
+-	out->antenna_gain.ghz24.a0 = gain;
+-	out->antenna_gain.ghz24.a1 = gain;
+-	out->antenna_gain.ghz24.a2 = gain;
+-	out->antenna_gain.ghz24.a3 = gain;
+-	gain = r123_extract_antgain(out->revision, in,
+-				    SSB_SPROM1_AGAIN_A,
+-				    SSB_SPROM1_AGAIN_A_SHIFT);
+-	out->antenna_gain.ghz5.a0 = gain;
+-	out->antenna_gain.ghz5.a1 = gain;
+-	out->antenna_gain.ghz5.a2 = gain;
+-	out->antenna_gain.ghz5.a3 = gain;
++	out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++						    SSB_SPROM1_AGAIN_BG,
++						    SSB_SPROM1_AGAIN_BG_SHIFT);
++	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++						    SSB_SPROM1_AGAIN_A,
++						    SSB_SPROM1_AGAIN_A_SHIFT);
++}
++
 +/* Revs 4 5 and 8 have partially shared layout */
 +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
 +{
@@ -1361,12 +1474,10 @@
 +	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
 +	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
 +	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
+ }
+ 
  static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
- {
- 	int i;
-@@ -427,10 +468,14 @@ static void sprom_extract_r45(struct ssb
+@@ -427,10 +459,14 @@ static void sprom_extract_r45(struct ssb
  		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
  		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
  		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
@@ -1381,15 +1492,30 @@
  	}
  	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
  	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -470,13 +515,21 @@ static void sprom_extract_r45(struct ssb
- 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- 	       sizeof(out->antenna_gain.ghz5));
+@@ -459,16 +495,16 @@ static void sprom_extract_r45(struct ssb
+ 	}
  
-+	sprom_extract_r458(out, in);
+ 	/* Extract the antenna gain values. */
+-	SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
++	SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
+ 	     SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
+-	SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
++	SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
+ 	     SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
+-	SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
++	SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
+ 	     SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
+-	SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
++	SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
+ 	     SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
+-	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+-	       sizeof(out->antenna_gain.ghz5));
 +
++	sprom_extract_r458(out, in);
+ 
  	/* TODO - get remaining rev 4 stuff needed */
  }
- 
+@@ -476,7 +512,13 @@ static void sprom_extract_r45(struct ssb
  static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
  {
  	int i;
@@ -1404,10 +1530,25 @@
  
  	/* extract the MAC address */
  	for (i = 0; i < 3; i++) {
-@@ -560,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
- 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- 	       sizeof(out->antenna_gain.ghz5));
- 
+@@ -549,16 +591,71 @@ static void sprom_extract_r8(struct ssb_
+ 	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+ 
+ 	/* Extract the antenna gain values. */
+-	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
++	SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+ 	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+-	SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
++	SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+ 	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+-	SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
++	SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+ 	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+-	SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
++	SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+ 	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+-	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+-	       sizeof(out->antenna_gain.ghz5));
++
 +	/* Extract cores power info info */
 +	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
 +		o = pwr_info_offset[i];
@@ -1464,11 +1605,10 @@
 +		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
 +
 +	sprom_extract_r458(out, in);
-+
+ 
  	/* TODO - get remaining rev 8 stuff needed */
  }
- 
-@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus
+@@ -572,37 +669,34 @@ static int sprom_extract(struct ssb_bus
  	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
  	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
  	memset(out->et1mac, 0xFF, 6);
@@ -1527,7 +1667,7 @@
  	}
  
  	if (out->boardflags_lo == 0xFFFF)
-@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus
+@@ -616,15 +710,14 @@ static int sprom_extract(struct ssb_bus
  static int ssb_pci_sprom_get(struct ssb_bus *bus,
  			     struct ssb_sprom *sprom)
  {
@@ -1545,7 +1685,7 @@
  		/*
  		 * get SPROM offset: SSB_SPROM_BASE1 except for
  		 * chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -644,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -644,7 +737,7 @@ static int ssb_pci_sprom_get(struct ssb_
  
  	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
  	if (!buf)
@@ -1554,7 +1694,7 @@
  	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
  	sprom_do_read(bus, buf);
  	err = sprom_check_crc(buf, bus->sprom_size);
-@@ -654,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -654,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_
  		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
  			      GFP_KERNEL);
  		if (!buf)
@@ -1584,7 +1724,7 @@
  				err = 0;
  				goto out_free;
  			}
-@@ -676,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -676,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_
  
  out_free:
  	kfree(buf);
@@ -1673,7 +1813,7 @@
   *
   * Licensed under the GNU/GPL. See COPYING for details.
   */
-@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
+@@ -617,136 +617,136 @@ static int ssb_pcmcia_sprom_check_crc(co
  	}						\
    } while (0)
  
@@ -1753,14 +1893,10 @@
 +	case SSB_PCMCIA_CIS_ANTGAIN:
 +		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
 +			"antg tpl size");
-+		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++		sprom->antenna_gain.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.a3 = tuple->TupleData[1];
 +		break;
 +	case SSB_PCMCIA_CIS_BFLAGS:
 +		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
@@ -1961,7 +2097,17 @@
  			bus->chip_package = 0;
  		} else {
  			bus->chip_id = 0x4710;
-@@ -354,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			bus->chip_package = 0;
+ 		}
+ 	}
++	ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
++		   "package 0x%02X\n", bus->chip_id, bus->chip_rev,
++		   bus->chip_package);
+ 	if (!bus->nr_devices)
+ 		bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+@@ -354,7 +359,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
  		dev->bus = bus;
  		dev->ops = bus->ops;
  
@@ -1970,7 +2116,7 @@
  			    "Core %d found: %s "
  			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
  			    i, ssb_core_name(dev->id.coreid),
-@@ -422,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -422,6 +427,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
  			bus->pcicore.dev = dev;
  #endif /* CONFIG_SSB_DRIVER_PCICORE */
  			break;
@@ -2151,12 +2297,16 @@
  static inline int b43_pci_ssb_bridge_init(void)
  {
  	return 0;
-@@ -196,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
+@@ -196,6 +205,10 @@ static inline int b43_pci_ssb_bridge_ini
  static inline void b43_pci_ssb_bridge_exit(void)
  {
  }
 -#endif /* CONFIG_SSB_PCIHOST */
 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
++
++/* driver_chipcommon_pmu.c */
++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
  
  #endif /* LINUX_SSB_PRIVATE_H_ */
 --- a/include/linux/ssb/ssb.h
@@ -2168,36 +2318,57 @@
 +struct ssb_sprom_core_pwr_info {
 +	u8 itssi_2g, itssi_5g;
 +	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
-+	u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++	u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
 +};
 +
  struct ssb_sprom {
  	u8 revision;
  	u8 il0mac[6];		/* MAC address for 802.11b/g */
-@@ -25,8 +31,10 @@ struct ssb_sprom {
+@@ -25,8 +31,13 @@ struct ssb_sprom {
  	u8 et1phyaddr;		/* MII address for enet1 */
  	u8 et0mdcport;		/* MDIO for enet0 */
  	u8 et1mdcport;		/* MDIO for enet1 */
 -	u8 board_rev;		/* Board revision number from SPROM. */
 +	u16 board_rev;		/* Board revision number from SPROM. */
++	u16 board_num;		/* Board number from SPROM. */
++	u16 board_type;		/* Board type from SPROM. */
  	u8 country_code;	/* Country Code */
-+	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
-+	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
++	char alpha2[2];		/* Country Code as two chars like EU or US */
++	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
++	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
  	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
  	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
  	u16 pa0b0;
-@@ -55,6 +63,10 @@ struct ssb_sprom {
+@@ -45,18 +56,22 @@ struct ssb_sprom {
+ 	u8 gpio1;		/* GPIO pin 1 */
+ 	u8 gpio2;		/* GPIO pin 2 */
+ 	u8 gpio3;		/* GPIO pin 3 */
+-	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+-	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+-	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+-	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ 	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+ 	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+ 	u8 tri2g;		/* 2.4GHz TX isolation */
  	u8 tri5gl;		/* 5.2GHz TX isolation */
  	u8 tri5g;		/* 5.3GHz TX isolation */
  	u8 tri5gh;		/* 5.8GHz TX isolation */
+-	u8 rxpo2g;		/* 2GHz RX power offset */
+-	u8 rxpo5g;		/* 5GHz RX power offset */
 +	u8 txpid2g[4];		/* 2GHz TX power index */
 +	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
 +	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
 +	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
- 	u8 rxpo2g;		/* 2GHz RX power offset */
- 	u8 rxpo5g;		/* 5GHz RX power offset */
++	s8 rxpo2g;		/* 2GHz RX power offset */
++	s8 rxpo5g;		/* 5GHz RX power offset */
  	u8 rssisav2g;		/* 2GHz RSSI params */
-@@ -76,6 +88,8 @@ struct ssb_sprom {
+ 	u8 rssismc2g;
+ 	u8 rssismf2g;
+@@ -76,26 +91,104 @@ struct ssb_sprom {
  	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
  	/* TODO store board flags in a single u64 */
  
@@ -2206,10 +2377,17 @@
  	/* Antenna gain values for up to 4 antennas
  	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
  	 * loss in the connectors is bigger than the gain. */
-@@ -88,6 +102,15 @@ struct ssb_sprom {
- 		} ghz5;		/* 5GHz band */
+ 	struct {
+-		struct {
+-			s8 a0, a1, a2, a3;
+-		} ghz24;	/* 2.4GHz band */
+-		struct {
+-			s8 a0, a1, a2, a3;
+-		} ghz5;		/* 5GHz band */
++		s8 a0, a1, a2, a3;
  	} antenna_gain;
  
+-	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
 +	struct {
 +		struct {
 +			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
@@ -2219,10 +2397,82 @@
 +		} ghz5;
 +	} fem;
 +
- 	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
++	u16 mcs2gpo[8];
++	u16 mcs5gpo[8];
++	u16 mcs5glpo[8];
++	u16 mcs5ghpo[8];
++	u8 opo;
++
++	u8 rxgainerr2ga[3];
++	u8 rxgainerr5gla[3];
++	u8 rxgainerr5gma[3];
++	u8 rxgainerr5gha[3];
++	u8 rxgainerr5gua[3];
++
++	u8 noiselvl2ga[3];
++	u8 noiselvl5gla[3];
++	u8 noiselvl5gma[3];
++	u8 noiselvl5gha[3];
++	u8 noiselvl5gua[3];
++
++	u8 regrev;
++	u8 txchain;
++	u8 rxchain;
++	u8 antswitch;
++	u16 cddpo;
++	u16 stbcpo;
++	u16 bw40po;
++	u16 bwduppo;
++
++	u8 tempthresh;
++	u8 tempoffset;
++	u16 rawtempsense;
++	u8 measpower;
++	u8 tempsense_slope;
++	u8 tempcorrx;
++	u8 tempsense_option;
++	u8 freqoffset_corr;
++	u8 iqcal_swp_dis;
++	u8 hw_iqcal_en;
++	u8 elna2g;
++	u8 elna5g;
++	u8 phycal_tempdelta;
++	u8 temps_period;
++	u8 temps_hysteresis;
++	u8 measpower1;
++	u8 measpower2;
++	u8 pcieingress_war;
++
++	/* power per rate from sromrev 9 */
++	u16 cckbw202gpo;
++	u16 cckbw20ul2gpo;
++	u32 legofdmbw202gpo;
++	u32 legofdmbw20ul2gpo;
++	u32 legofdmbw205glpo;
++	u32 legofdmbw20ul5glpo;
++	u32 legofdmbw205gmpo;
++	u32 legofdmbw20ul5gmpo;
++	u32 legofdmbw205ghpo;
++	u32 legofdmbw20ul5ghpo;
++	u32 mcsbw202gpo;
++	u32 mcsbw20ul2gpo;
++	u32 mcsbw402gpo;
++	u32 mcsbw205glpo;
++	u32 mcsbw20ul5glpo;
++	u32 mcsbw405glpo;
++	u32 mcsbw205gmpo;
++	u32 mcsbw20ul5gmpo;
++	u32 mcsbw405gmpo;
++	u32 mcsbw205ghpo;
++	u32 mcsbw20ul5ghpo;
++	u32 mcsbw405ghpo;
++	u16 mcs32po;
++	u16 legofdm40duppo;
++	u8 sar2g;
++	u8 sar5g;
  };
  
-@@ -95,7 +118,7 @@ struct ssb_sprom {
+ /* Information about the PCB the circuitry is soldered on. */
  struct ssb_boardinfo {
  	u16 vendor;
  	u16 type;
@@ -2231,7 +2481,7 @@
  };
  
  
-@@ -167,7 +190,7 @@ struct ssb_device {
+@@ -167,7 +260,7 @@ struct ssb_device {
  	 * is an optimization. */
  	const struct ssb_bus_ops *ops;
  
@@ -2240,7 +2490,7 @@
  
  	struct ssb_bus *bus;
  	struct ssb_device_id id;
-@@ -225,10 +248,9 @@ struct ssb_driver {
+@@ -225,10 +318,9 @@ struct ssb_driver {
  #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
  
  extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -2254,7 +2504,7 @@
  extern void ssb_driver_unregister(struct ssb_driver *drv);
  
  
-@@ -269,7 +291,8 @@ struct ssb_bus {
+@@ -269,7 +361,8 @@ struct ssb_bus {
  
  	const struct ssb_bus_ops *ops;
  
@@ -2264,7 +2514,7 @@
  	struct ssb_device *mapped_device;
  	union {
  		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-@@ -281,14 +304,17 @@ struct ssb_bus {
+@@ -281,14 +374,17 @@ struct ssb_bus {
  	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
  	spinlock_t bar_lock;
  
@@ -2289,7 +2539,7 @@
  
  	/* See enum ssb_quirks */
  	unsigned int quirks;
-@@ -300,7 +326,7 @@ struct ssb_bus {
+@@ -300,7 +396,7 @@ struct ssb_bus {
  
  	/* ID information about the Chip. */
  	u16 chip_id;
@@ -2298,7 +2548,7 @@
  	u16 sprom_offset;
  	u16 sprom_size;		/* number of words in sprom */
  	u8 chip_package;
-@@ -396,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -396,7 +492,9 @@ extern bool ssb_is_sprom_available(struc
  
  /* Set a fallback SPROM.
   * See kdoc at the function definition for complete documentation. */
@@ -2309,7 +2559,7 @@
  
  /* Suspend a SSB bus.
   * Call this from the parent bus suspend routine. */
-@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -667,6 +765,7 @@ extern int ssb_bus_may_powerdown(struct
   * Otherwise static always-on powercontrol will be used. */
  extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
  
@@ -2930,3 +3180,32 @@
   *
   * Licensed under the GNU/GPL. See COPYING for details.
   *
+@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
+ 			case SSB_SDIO_CIS_ANTGAIN:
+ 				GOTO_ERROR_ON(tuple->size != 2,
+ 					      "antg tpl size");
+-				sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+-				sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+-				sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+-				sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+-				sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+-				sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+-				sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+-				sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++				sprom->antenna_gain.a0 = tuple->data[1];
++				sprom->antenna_gain.a1 = tuple->data[1];
++				sprom->antenna_gain.a2 = tuple->data[1];
++				sprom->antenna_gain.a3 = tuple->data[1];
+ 				break;
+ 			case SSB_SDIO_CIS_BFLAGS:
+ 				GOTO_ERROR_ON((tuple->size != 3) &&
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -2,6 +2,7 @@
+ #define LINUX_SSB_DRIVER_GIGE_H_
+ 
+ #include <linux/ssb/ssb.h>
++#include <linux/bug.h>
+ #include <linux/pci.h>
+ #include <linux/spinlock.h>
+