aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/patches-2.6.31/941-ssb_update.patch
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2010-06-26 20:42:58 +0000
committerFelix Fietkau <nbd@openwrt.org>2010-06-26 20:42:58 +0000
commitda1bb88a2b900f0392b731ec47c5e1bff956fd8f (patch)
tree597146471e3eeafb4ba55e802e80b896770808ff /target/linux/generic/patches-2.6.31/941-ssb_update.patch
parent6117c04c9416b295347fb45c37e430f01df1d0d9 (diff)
downloadupstream-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.tar.gz
upstream-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.tar.bz2
upstream-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.zip
rename target/linux/generic-2.6 to generic
SVN-Revision: 21952
Diffstat (limited to 'target/linux/generic/patches-2.6.31/941-ssb_update.patch')
-rw-r--r--target/linux/generic/patches-2.6.31/941-ssb_update.patch505
1 files changed, 505 insertions, 0 deletions
diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
new file mode 100644
index 0000000000..b8c8c0674c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
@@ -0,0 +1,505 @@
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+ }
+
++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
++ u32 offset, u32 mask, u32 set)
++{
++ u32 value;
++
++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
++ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++ value &= mask;
++ value |= set;
++ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
++ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++}
++
+ struct pmu0_plltab_entry {
+ u16 freq; /* Crystal frequency in kHz.*/
+ u8 xf; /* Crystal frequency value for PMU control */
+@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon
+ ssb_pmu_pll_init(cc);
+ ssb_pmu_resources_init(cc);
+ }
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++ enum ssb_pmu_ldo_volt_id id, u32 voltage)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++ u32 addr, shift, mask;
++
++ switch (bus->chip_id) {
++ case 0x4328:
++ case 0x5354:
++ switch (id) {
++ case LDO_VOLT1:
++ addr = 2;
++ shift = 25;
++ mask = 0xF;
++ break;
++ case LDO_VOLT2:
++ addr = 3;
++ shift = 1;
++ mask = 0xF;
++ break;
++ case LDO_VOLT3:
++ addr = 3;
++ shift = 9;
++ mask = 0xF;
++ break;
++ case LDO_PAREF:
++ addr = 3;
++ shift = 17;
++ mask = 0x3F;
++ break;
++ default:
++ SSB_WARN_ON(1);
++ return;
++ }
++ break;
++ case 0x4312:
++ if (SSB_WARN_ON(id != LDO_PAREF))
++ return;
++ addr = 0;
++ shift = 21;
++ mask = 0x3F;
++ break;
++ default:
++ return;
++ }
++
++ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
++ (voltage & mask) << shift);
++}
++
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++ int ldo;
++
++ switch (bus->chip_id) {
++ case 0x4312:
++ ldo = SSB_PMURES_4312_PA_REF_LDO;
++ break;
++ case 0x4328:
++ ldo = SSB_PMURES_4328_PA_REF_LDO;
++ break;
++ case 0x5354:
++ ldo = SSB_PMURES_5354_PA_REF_LDO;
++ break;
++ default:
++ return;
++ }
++
++ if (on)
++ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
++ else
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
++ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
++}
++
++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -469,6 +469,8 @@ static int ssb_devices_register(struct s
+ dev->parent = &bus->host_pcmcia->dev;
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ case SSB_BUSTYPE_SSB:
+ dev->dma_mask = &dev->coherent_dma_mask;
+ break;
+@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void)
+ ssb_buses_lock();
+ err = ssb_attach_queued_buses();
+ ssb_buses_unlock();
+- if (err)
++ if (err) {
+ bus_unregister(&ssb_bustype);
++ goto out;
++ }
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void)
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+-
++out:
+ return err;
+ }
+ /* ssb must be initialized after PCI but before the ssb drivers.
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -169,8 +169,14 @@ err_pci:
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+ #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+-#define SPEX(_outvar, _offset, _mask, _shift) \
++#define SPEX16(_outvar, _offset, _mask, _shift) \
+ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift) \
++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++ SPEX16(_outvar, _offset, _mask, _shift)
++
+
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_
+
+ /* extract the MAC address */
+ for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+ SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
+ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+ SSB_SPROM8_ANTAVAIL_A_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_
+ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+ SSB_SPROM8_ITSSI_A_SHIFT);
++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++ SSB_SPROM8_MAXP_AL_SHIFT);
+ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+ SSB_SPROM8_GPIOA_P1_SHIFT);
+ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+ SSB_SPROM8_GPIOB_P3_SHIFT);
++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++ SSB_SPROM8_TRI5G_SHIFT);
++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++ SSB_SPROM8_TRI5GH_SHIFT);
++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++ SSB_SPROM8_RXPO5G_SHIFT);
++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++ SSB_SPROM8_RSSISMC2G_SHIFT);
++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++ SSB_SPROM8_RSSISAV2G_SHIFT);
++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++ SSB_SPROM8_BXA2G_SHIFT);
++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++ SSB_SPROM8_RSSISMC5G_SHIFT);
++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++ SSB_SPROM8_RSSISAV5G_SHIFT);
++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++ SSB_SPROM8_BXA5G_SHIFT);
++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+
+ /* Extract the antenna gain values. */
+ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus
+ ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+ " revision %d detected. Will extract"
+ " v1\n", out->revision);
++ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b
+ } else
+ ssb_pcmcia_switch_segment(bus, 0);
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+ return readl(bus->mmio + offset);
+ }
+@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu
+ return ssb_pci_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_PCMCIA:
+ return ssb_pcmcia_switch_coreidx(bus, coreidx);
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+ return 0;
+ }
+@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus)
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+ bus->mmio = NULL;
+ bus->mapped_device = NULL;
+@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct
+ SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ break;
++ case SSB_BUSTYPE_SDIO:
++ break;
+ }
+
+ return mmio;
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -27,24 +27,54 @@ struct ssb_sprom {
+ u8 et1mdcport; /* MDIO for enet1 */
+ u8 board_rev; /* Board revision number from SPROM. */
+ u8 country_code; /* Country Code */
+- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
+- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
+ u16 pa0b0;
+ u16 pa0b1;
+ u16 pa0b2;
+ u16 pa1b0;
+ u16 pa1b1;
+ u16 pa1b2;
++ u16 pa1lob0;
++ u16 pa1lob1;
++ u16 pa1lob2;
++ u16 pa1hib0;
++ u16 pa1hib1;
++ u16 pa1hib2;
+ u8 gpio0; /* GPIO pin 0 */
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+- u16 boardflags_lo; /* Boardflags (low 16 bits) */
+- u16 boardflags_hi; /* Boardflags (high 16 bits) */
++ u8 tri2g; /* 2.4GHz TX isolation */
++ u8 tri5gl; /* 5.2GHz TX isolation */
++ u8 tri5g; /* 5.3GHz TX isolation */
++ u8 tri5gh; /* 5.8GHz TX isolation */
++ u8 rxpo2g; /* 2GHz RX power offset */
++ u8 rxpo5g; /* 5GHz RX power offset */
++ u8 rssisav2g; /* 2GHz RSSI params */
++ u8 rssismc2g;
++ u8 rssismf2g;
++ u8 bxa2g; /* 2GHz BX arch */
++ u8 rssisav5g; /* 5GHz RSSI params */
++ u8 rssismc5g;
++ u8 rssismf5g;
++ u8 bxa5g; /* 5GHz BX arch */
++ u16 cck2gpo; /* CCK power offset */
++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
++ u16 boardflags_lo; /* Board flags (bits 0-15) */
++ u16 boardflags_hi; /* Board flags (bits 16-31) */
++ u16 boardflags2_lo; /* Board flags (bits 32-47) */
++ u16 boardflags2_hi; /* Board flags (bits 48-63) */
++ /* TODO store board flags in a single u64 */
+
+ /* Antenna gain values for up to 4 antennas
+ * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+@@ -58,7 +88,7 @@ struct ssb_sprom {
+ } ghz5; /* 5GHz band */
+ } antenna_gain;
+
+- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+
+ /* Information about the PCB the circuitry is soldered on. */
+@@ -208,6 +238,7 @@ enum ssb_bustype {
+ SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
+ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
+ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
+ };
+
+ /* board_vendor */
+@@ -240,8 +271,12 @@ struct ssb_bus {
+
+ /* The core in the basic address register window. (PCI bus only) */
+ struct ssb_device *mapped_device;
+- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+- u8 mapped_pcmcia_seg;
++ union {
++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
++ u8 mapped_pcmcia_seg;
++ /* Current SSB base address window for SDIO. */
++ u32 sdio_sbaddr;
++ };
+ /* Lock for core and segment switching.
+ * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+ spinlock_t bar_lock;
+@@ -252,6 +287,11 @@ struct ssb_bus {
+ struct pci_dev *host_pci;
+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+ struct pcmcia_device *host_pcmcia;
++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++ struct sdio_func *host_sdio;
++
++ /* See enum ssb_quirks */
++ unsigned int quirks;
+
+ #ifdef CONFIG_SSB_SPROM
+ /* Mutex to protect the SPROM writing. */
+@@ -306,6 +346,11 @@ struct ssb_bus {
+ #endif /* DEBUG */
+ };
+
++enum ssb_quirks {
++ /* SDIO connected card requires performing a read after writing a 32-bit value */
++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
++};
++
+ /* The initialization-invariants. */
+ struct ssb_init_invariants {
+ /* Versioning information about the PCB. */
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
++enum ssb_pmu_ldo_volt_id {
++ LDO_PAREF = 0,
++ LDO_VOLT1,
++ LDO_VOLT2,
++ LDO_VOLT3,
++};
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++ enum ssb_pmu_ldo_volt_id id, u32 voltage);
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -162,7 +162,7 @@
+
+ /* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+- * in two-byte quantinies.
++ * in two-byte quantities.
+ */
+ #define SSB_SPROMSIZE_WORDS 64
+ #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
+@@ -327,8 +327,11 @@
+ #define SSB_SPROM5_GPIOB_P3_SHIFT 8
+
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
+-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
++#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
++#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
+ #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
+ #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
+ #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
+@@ -354,14 +357,63 @@
+ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM8_GPIOB_P3_SHIFT 8
+-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
+-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
++#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSISMF2G 0x000F
++#define SSB_SPROM8_RSSISMC2G 0x00F0
++#define SSB_SPROM8_RSSISMC2G_SHIFT 4
++#define SSB_SPROM8_RSSISAV2G 0x0700
++#define SSB_SPROM8_RSSISAV2G_SHIFT 8
++#define SSB_SPROM8_BXA2G 0x1800
++#define SSB_SPROM8_BXA2G_SHIFT 11
++#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSISMF5G 0x000F
++#define SSB_SPROM8_RSSISMC5G 0x00F0
++#define SSB_SPROM8_RSSISMC5G_SHIFT 4
++#define SSB_SPROM8_RSSISAV5G 0x0700
++#define SSB_SPROM8_RSSISAV5G_SHIFT 8
++#define SSB_SPROM8_BXA5G 0x1800
++#define SSB_SPROM8_BXA5G_SHIFT 11
++#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
++#define SSB_SPROM8_TRI5G_SHIFT 8
++#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
++#define SSB_SPROM8_TRI5GH_SHIFT 8
++#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
++#define SSB_SPROM8_RXPO5G_SHIFT 8
++#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
+ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+ #define SSB_SPROM8_ITSSI_BG_SHIFT 8
+-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
+-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
++#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1 0x10C4
++#define SSB_SPROM8_PA0B2 0x10C6
++#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
+ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
+ #define SSB_SPROM8_ITSSI_A_SHIFT 8
++#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
++#define SSB_SPROM8_MAXP_AL_SHIFT 8
++#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1 0x10CE
++#define SSB_SPROM8_PA1B2 0x10D0
++#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1 0x10D4
++#define SSB_SPROM8_PA1LOB2 0x10D6
++#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1 0x10DA
++#define SSB_SPROM8_PA1HIB2 0x10DC
++#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
+
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {