ramips: move relocating loader to common location

Allow other targets to use it, too.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45162

1 files changed, 159 insertions, 0 deletions

diff --git a/target/linux/generic/image/relocate/head.S b/target/linux/generic/image/relocate/head.S
new file mode 100644
index 0000000000..3e5b374ba0
--- /dev/null
+++ b/target/linux/generic/image/relocate/head.S
@@ -0,0 +1,159 @@
+/*
+ * Kernel relocation stub for MIPS devices
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Based on:
+ *
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *	Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *	Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "cp0regdef.h"
+#include "cacheops.h"
+
+#define KSEG0		0x80000000
+
+	.macro	ehb
+	sll     zero, 3
+	.endm
+
+	.macro reset
+	li t0, 0xbe000034
+	lw t1, 0(t0)
+	ori t1, 1
+	sw t1, 0(t0)
+	.endm
+
+	.text
+
+LEAF(startup)
+	.set noreorder
+	.set mips32
+
+	.fill 0x10000
+
+	mtc0	zero, CP0_WATCHLO	# clear watch registers
+	mtc0	zero, CP0_WATCHHI
+	mtc0	zero, CP0_CAUSE		# clear before writing status register
+
+	mfc0	t0, CP0_STATUS
+	li	t1, 0x1000001f
+	or	t0, t1
+	xori	t0, 0x1f
+	mtc0	t0, CP0_STATUS
+	ehb
+
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+	ehb
+
+	la	t0, __reloc_label	# get linked address of label
+	bal	__reloc_label		# branch and link to label to
+	nop				# get actual address
+__reloc_label:
+	subu	t0, ra, t0		# get reloc_delta
+
+	/* Copy our code to the right place */
+	la	t1, _code_start		# get linked address of _code_start
+	la	t2, _code_end		# get linked address of _code_end
+
+	addu	t4, t2, t0		# calculate actual address of _code_end
+	lw	t5, 0(t4)		# get extra data size
+
+	add	t2, t5
+	add	t2, 4
+
+	add	t0, t1			# calculate actual address of _code_start
+
+__reloc_copy:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	add	t1, 4
+	blt	t1, t2, __reloc_copy
+	add	t0, 4
+
+	/* flush cache */
+	la	t0, _code_start
+	la	t1, _code_end
+
+	li	t2, ~(CONFIG_CACHELINE_SIZE - 1)
+	and	t0, t2
+	and	t1, t2
+	li	t2, CONFIG_CACHELINE_SIZE
+
+	b	__flush_check
+	nop
+
+__flush_line:
+	cache	Hit_Writeback_Inv_D, 0(t0)
+	cache	Hit_Invalidate_I, 0(t0)
+	add	t0, t2
+
+__flush_check:
+	bne	t0, t1, __flush_line
+	nop
+
+	sync
+
+	la	t0, __reloc_back
+	j	t0
+	nop
+
+__reloc_back:
+	la	t0, _code_end
+	add	t0, 4
+
+	addu	t1, t0, t5
+
+	li	t2, KERNEL_ADDR
+
+__kernel_copy:
+	lw	t3, 0(t0)
+	sw	t3, 0(t2)
+	add	t0, 4
+	blt	t0, t1, __kernel_copy
+	add	t2, 4
+
+	/* flush cache */
+	li	t0, KERNEL_ADDR
+	addu	t1, t0, t5
+
+	add t1, CONFIG_CACHELINE_SIZE - 1
+	li	t2, ~(CONFIG_CACHELINE_SIZE - 1)
+	and	t0, t2
+	and	t1, t2
+	li	t2, CONFIG_CACHELINE_SIZE
+
+	b	__kernel_flush_check
+	nop
+
+__kernel_flush_line:
+	cache	Hit_Writeback_Inv_D, 0(t0)
+	cache	Hit_Invalidate_I, 0(t0)
+	add	t0, t2
+
+__kernel_flush_check:
+	bne	t0, t1, __kernel_flush_line
+	nop
+
+	sync
+
+	li	t0, KERNEL_ADDR
+	jr	t0
+	nop
+
+	.set reorder
+END(startup)