diff options
author | Chuanhong Guo <gch981213@gmail.com> | 2019-05-16 15:09:07 +0800 |
---|---|---|
committer | Petr Štetiar <ynezz@true.cz> | 2019-06-05 10:26:33 +0200 |
commit | 0ab9f283f75ad8314ad4be7c70d1397e9dbbfe15 (patch) | |
tree | 6af3612ae6508ac96d98823f6e3bdd07dc13344a /target/linux/generic/hack-4.9/202-reduce_module_size.patch | |
parent | 64493d42b41253aafe1538e325e0692db4201046 (diff) | |
download | upstream-0ab9f283f75ad8314ad4be7c70d1397e9dbbfe15.tar.gz upstream-0ab9f283f75ad8314ad4be7c70d1397e9dbbfe15.tar.bz2 upstream-0ab9f283f75ad8314ad4be7c70d1397e9dbbfe15.zip |
ramips: add support for TOTOLINK LR1200
Specifications:
- SoC: MT7628DAN (MT7628AN with 64MB built-in RAM)
- Flash: 8M SPI NOR
- Ethernet: 5x 10/100Mbps
- WiFi: 2.4G: MT7628 built-in
5G: MT7612E
- 1x miniPCIe slot for LTE modem (only USB pins connected)
- 1x SIM slot
Flash instruction:
U-boot has a builtin web recovery page:
1. Hold the reset button while powering it up
2. Connect to the ethernet and set an IP in 192.168.1.0/24 range
3. Open your browser and upload firmware through http://192.168.1.1
Note about the LTE modem:
If your router comes with an EC25 module and it doesn't show up
as a QMI device, you should do the following to switch it to QMI
mode:
1. Install kmod-usb-serial-option and a terminal software
(e.g. minicom or screen). All 4 serial ports of the modem
should be available now.
2. Open /dev/ttyUSB3 with the terminal software and type this
AT command: AT+QCFG="usbnet",0
3. Power-cycle the router. You should now get a QMI device
recognized.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Diffstat (limited to 'target/linux/generic/hack-4.9/202-reduce_module_size.patch')
0 files changed, 0 insertions, 0 deletions