generic: jumbo frames support for rtl8366s

This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

SVN-Revision: 28267

1 files changed, 51 insertions, 0 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366s.c b/target/linux/generic/files/drivers/net/phy/rtl8366s.c
index e2d8402cf6..30916589b3 100644
--- a/target/linux/generic/files/drivers/net/phy/rtl8366s.c
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366s.c
@@ -655,6 +655,49 @@ static int rtl8366s_sw_set_blinkrate(struct switch_dev *dev,
 				val->value.i);
 }
 
+static int rtl8366s_sw_get_max_length(struct switch_dev *dev,
+					const struct switch_attr *attr,
+					struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+
+	rtl8366_smi_read_reg(smi, RTL8366S_SGCR, &data);
+
+	val->value.i = ((data & (RTL8366S_SGCR_MAX_LENGTH_MASK)) >> 4);
+
+	return 0;
+}
+
+static int rtl8366s_sw_set_max_length(struct switch_dev *dev,
+					const struct switch_attr *attr,
+					struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	char length_code;
+
+	switch (val->value.i) {
+		case 0:
+			length_code = RTL8366S_SGCR_MAX_LENGTH_1522;
+			break;
+		case 1:
+			length_code = RTL8366S_SGCR_MAX_LENGTH_1536;
+			break;
+		case 2:
+			length_code = RTL8366S_SGCR_MAX_LENGTH_1552;
+			break;
+		case 3:
+			length_code = RTL8366S_SGCR_MAX_LENGTH_16000;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	return rtl8366_smi_rmwr(smi, RTL8366S_SGCR,
+			RTL8366S_SGCR_MAX_LENGTH_MASK,
+			length_code);
+}
+
 static int rtl8366s_sw_get_learning_enable(struct switch_dev *dev,
 					   const struct switch_attr *attr,
 					   struct switch_val *val)
@@ -863,6 +906,14 @@ static struct switch_attr rtl8366s_globals[] = {
 		.set = rtl8366s_sw_set_blinkrate,
 		.get = rtl8366s_sw_get_blinkrate,
 		.max = 5
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "max_length",
+		.description = "Get/Set the maximum length of valid packets"
+		" (0 = 1522, 1 = 1536, 2 = 1552, 3 = 16000 (9216?))",
+		.set = rtl8366s_sw_set_max_length,
+		.get = rtl8366s_sw_get_max_length,
+		.max = 3,
 	},
 };