generic: remove brcmfmac-sdio.h

This file is present in the kernel so no point overlaying it.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

1 files changed, 0 insertions, 124 deletions

diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
deleted file mode 100644
index 1ade657d5f..0000000000
--- a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright (c) 2013 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _LINUX_BRCMFMAC_PLATFORM_H
-#define _LINUX_BRCMFMAC_PLATFORM_H
-
-/*
- * Platform specific driver functions and data. Through the platform specific
- * device data functions can be provided to help the brcmfmac driver to
- * operate with the device in combination with the used platform.
- *
- * Use the platform data in the following (similar) way:
- *
- *
-#include <brcmfmac_platform.h>
-
-
-static void brcmfmac_power_on(void)
-{
-}
-
-static void brcmfmac_power_off(void)
-{
-}
-
-static void brcmfmac_reset(void)
-{
-}
-
-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
-	.power_on		= brcmfmac_power_on,
-	.power_off		= brcmfmac_power_off,
-	.reset			= brcmfmac_reset
-};
-
-static struct platform_device brcmfmac_device = {
-	.name			= BRCMFMAC_SDIO_PDATA_NAME,
-	.id			= PLATFORM_DEVID_NONE,
-	.dev.platform_data	= &brcmfmac_sdio_pdata
-};
-
-void __init brcmfmac_init_pdata(void)
-{
-	brcmfmac_sdio_pdata.oob_irq_supported = true;
-	brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
-	brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
-					    IORESOURCE_IRQ_HIGHLEVEL;
-	platform_device_register(&brcmfmac_device);
-}
- *
- *
- * Note: the brcmfmac can be loaded as module or be statically built-in into
- * the kernel. If built-in then do note that it uses module_init (and
- * module_exit) routines which equal device_initcall. So if you intend to
- * create a module with the platform specific data for the brcmfmac and have
- * it built-in to the kernel then use a higher initcall then device_initcall
- * (see init.h). If this is not done then brcmfmac will load without problems
- * but will not pickup the platform data.
- *
- * When the driver does not "detect" platform driver data then it will continue
- * without reporting anything and just assume there is no data needed. Which is
- * probably true for most platforms.
- *
- * Explanation of the platform_data fields:
- *
- * drive_strength: is the preferred drive_strength to be used for the SDIO
- * pins. If 0 then a default value will be used. This is the target drive
- * strength, the exact drive strength which will be used depends on the
- * capabilities of the device.
- *
- * oob_irq_supported: does the board have support for OOB interrupts. SDIO
- * in-band interrupts are relatively slow and for having less overhead on
- * interrupt processing an out of band interrupt can be used. If the HW
- * supports this then enable this by setting this field to true and configure
- * the oob related fields.
- *
- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
- * used for registering the irq using request_irq function.
- *
- * power_on: This function is called by the brcmfmac when the module gets
- * loaded. This can be particularly useful for low power devices. The platform
- * spcific routine may for example decide to power up the complete device.
- * If there is no use-case for this function then provide NULL.
- *
- * power_off: This function is called by the brcmfmac when the module gets
- * unloaded. At this point the device can be powered down or otherwise be reset.
- * So if an actual power_off is not supported but reset is then reset the device
- * when this function gets called. This can be particularly useful for low power
- * devices. If there is no use-case for this function (either power-down or
- * reset) then provide NULL.
- *
- * reset: This function can get called if the device communication broke down.
- * This functionality is particularly useful in case of SDIO type devices. It is
- * possible to reset a dongle via sdio data interface, but it requires that
- * this is fully functional. This function is chip/module specific and this
- * function should return only after the complete reset has completed.
- */
-
-#define BRCMFMAC_SDIO_PDATA_NAME	"brcmfmac_sdio"
-
-struct brcmfmac_sdio_platform_data {
-	unsigned int drive_strength;
-	bool oob_irq_supported;
-	unsigned int oob_irq_nr;
-	unsigned long oob_irq_flags;
-	void (*power_on)(void);
-	void (*power_off)(void);
-	void (*reset)(void);
-};
-
-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */