diff options
author | Hannu Nyman <hannu.nyman@iki.fi> | 2018-06-27 21:52:45 +0300 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-06-27 22:10:23 +0200 |
commit | dba362772e5ba5e991b6f2593c72e7fce460694d (patch) | |
tree | ee202cc45b16b4d65775a09e0a4e71fd84608a9b /target/linux/generic/files | |
parent | 618d59aec24755123f902510e20e477c14d95186 (diff) | |
download | upstream-dba362772e5ba5e991b6f2593c72e7fce460694d.tar.gz upstream-dba362772e5ba5e991b6f2593c72e7fce460694d.tar.bz2 upstream-dba362772e5ba5e991b6f2593c72e7fce460694d.zip |
ipq806x: remove "firmware" partition definition from netgear routers
Remove the "firmware" partition definition from the DTS of R7800
to fix sysupgrade.
Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x
and that causes mtd to misbehave as additional kernel and ubi
partitions are detected from inside the "firmware" partition.
[ 1.111324] 0x000001480000-0x000001880000 : "kernel"
[ 1.121005] 0x000001880000-0x000007900000 : "ubi"
[ 1.283912] 0x000007900000-0x000008000000 : "reserve"
[ 1.296407] 0x000001480000-0x000007900000 : "firmware"
[ 1.468043] no rootfs found after FIT image in "firmware"
[ 2.426860] 2 uimage-fw partitions found on MTD device firmware
[ 2.426931] 0x000001480000-0x000001880000 : "kernel"
[ 2.440420] 0x000001880000-0x000007900000 : "ubi"
Both kernel and ubi are already defined in DTS, so this duplication
leads into errors in sysupgrade:
Writing from <stdin> to kernel ...
ubiattach: error!: strtoul: unable to parse the number '6 mtd10'
ubiattach: error!: bad MTD device number: "6 mtd10"
The partition is defined to same area as kernel+ubi, and is not
needed for sysupgrade anymore. Remove it to fix things.
Only tested for the R7800 but all of them should behave equal.
Fixes: FS#1617
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[squashed commits, add "tested on" note]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/generic/files')
0 files changed, 0 insertions, 0 deletions