generic: add b53 swconfig switch driver

Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305

1 files changed, 401 insertions, 0 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c b/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c
new file mode 100644
index 0000000000..9283af6072
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c
@@ -0,0 +1,401 @@
+/*
+ * B53 register access through MII registers
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include "b53_priv.h"
+
+#define B53_PSEUDO_PHY	0x1e /* Register Access Pseudo PHY */
+
+/* MII registers */
+#define REG_MII_PAGE    0x10    /* MII Page register */
+#define REG_MII_ADDR    0x11    /* MII Address register */
+#define REG_MII_DATA0   0x18    /* MII Data register 0 */
+#define REG_MII_DATA1   0x19    /* MII Data register 1 */
+#define REG_MII_DATA2   0x1a    /* MII Data register 2 */
+#define REG_MII_DATA3   0x1b    /* MII Data register 3 */
+
+#define REG_MII_PAGE_ENABLE     BIT(0)
+#define REG_MII_ADDR_WRITE      BIT(0)
+#define REG_MII_ADDR_READ       BIT(1)
+
+static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
+{
+	int i;
+	u16 v;
+	int ret;
+	struct mii_bus *bus = dev->priv;
+
+	if (dev->current_page != page) {
+		/* set page number */
+		v = (page << 8) | REG_MII_PAGE_ENABLE;
+		ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_PAGE, v);
+		if (ret)
+			return ret;
+		dev->current_page = page;
+	}
+
+	/* set register address */
+	v = (reg << 8) | op;
+	ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_ADDR, v);
+	if (ret)
+		return ret;
+
+	/* check if operation completed */
+	for (i = 0; i < 5; ++i) {
+		v = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_ADDR);
+		if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
+			break;
+		usleep_range(10, 100);
+	}
+
+	if (WARN_ON(i == 5))
+		return -EIO;
+
+	return 0;
+}
+
+static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0) & 0xff;
+
+	return 0;
+}
+
+static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0);
+
+	return 0;
+}
+
+static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	*val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0);
+	*val |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA1) << 16;
+
+	return 0;
+}
+
+static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	u64 temp = 0;
+	int i;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	for (i = 2; i >= 0; i--) {
+		temp <<= 16;
+		temp |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i);
+	}
+
+	*val = temp;
+
+	return 0;
+}
+
+static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+	struct mii_bus *bus = dev->priv;
+	u64 temp = 0;
+	int i;
+	int ret;
+
+	ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+	if (ret)
+		return ret;
+
+	for (i = 3; i >= 0; i--) {
+		temp <<= 16;
+		temp |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i);
+	}
+
+	*val = temp;
+
+	return 0;
+}
+
+static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0, value);
+	if (ret)
+		return ret;
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
+			     u16 value)
+{
+	struct mii_bus *bus = dev->priv;
+	int ret;
+
+	ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0, value);
+	if (ret)
+		return ret;
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
+				    u32 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned int i;
+	u32 temp = value;
+
+	for (i = 0; i < 2; i++) {
+		int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+				    temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+
+}
+
+static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
+				    u64 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned i;
+	u64 temp = value;
+
+	for (i = 0; i < 3; i++) {
+		int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+				    temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+
+}
+
+static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
+			     u64 value)
+{
+	struct mii_bus *bus = dev->priv;
+	unsigned i;
+	u64 temp = value;
+
+	for (i = 0; i < 4; i++) {
+		int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+				    temp & 0xffff);
+		if (ret)
+			return ret;
+		temp >>= 16;
+	}
+
+	return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static struct b53_io_ops b53_mdio_ops = {
+	.read8 = b53_mdio_read8,
+	.read16 = b53_mdio_read16,
+	.read32 = b53_mdio_read32,
+	.read48 = b53_mdio_read48,
+	.read64 = b53_mdio_read64,
+	.write8 = b53_mdio_write8,
+	.write16 = b53_mdio_write16,
+	.write32 = b53_mdio_write32,
+	.write48 = b53_mdio_write48,
+	.write64 = b53_mdio_write64,
+};
+
+static int b53_phy_probe(struct phy_device *phydev)
+{
+	struct b53_device dev;
+	int ret;
+
+	/* allow the generic phy driver to take over */
+	if (phydev->addr != B53_PSEUDO_PHY && phydev->addr != 0)
+		return -ENODEV;
+
+	dev.current_page = 0xff;
+	dev.priv = phydev->bus;
+	dev.ops = &b53_mdio_ops;
+	dev.pdata = NULL;
+	mutex_init(&dev.reg_mutex);
+
+	ret = b53_switch_detect(&dev);
+	if (!ret)
+		return ret;
+
+	if (is5325(&dev) || is5365(&dev))
+		phydev->supported = SUPPORTED_100baseT_Full;
+	else
+		phydev->supported = SUPPORTED_1000baseT_Full;
+
+	phydev->advertising = phydev->supported;
+
+	return 0;
+}
+
+static int b53_phy_config_init(struct phy_device *phydev)
+{
+	struct b53_device *dev;
+	int ret;
+
+	dev = b53_switch_alloc(&phydev->dev, &b53_mdio_ops, phydev->bus);
+	if (!dev)
+		return -ENOMEM;
+
+	/* we don't use page 0xff, so force a page set */
+	dev->current_page = 0xff;
+	/* force the ethX as alias */
+	dev->sw_dev.alias = phydev->attached_dev->name;
+
+	ret = b53_switch_register(dev);
+	if (ret) {
+		pr_info("failed to register switch: %i\n", ret);
+		return ret;
+	}
+
+	phydev->priv = dev;
+
+	return 0;
+}
+
+static void b53_phy_remove(struct phy_device *phydev)
+{
+	struct b53_device *priv = phydev->priv;
+
+	if (!priv)
+		return;
+
+	b53_switch_remove(priv);
+
+	phydev->priv = NULL;
+}
+
+static int b53_phy_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int b53_phy_read_status(struct phy_device *phydev)
+{
+	struct b53_device *priv = phydev->priv;
+
+	if (is5325(priv) || is5365(priv))
+		phydev->speed = 100;
+	else
+		phydev->speed = 1000;
+
+	phydev->duplex = DUPLEX_FULL;
+	phydev->link = 1;
+	phydev->state = PHY_RUNNING;
+
+	netif_carrier_on(phydev->attached_dev);
+	phydev->adjust_link(phydev->attached_dev);
+
+	return 0;
+}
+
+/* BCM5325, BCM539x */
+static struct phy_driver b53_phy_driver_id1 = {
+	.phy_id		= 0x0143bc00,
+	.name		= "Broadcom B53 (1)",
+	.phy_id_mask	= 0x1ffffc00,
+	.features	= 0,
+	.probe		= b53_phy_probe,
+	.remove		= b53_phy_remove,
+	.config_aneg	= b53_phy_config_aneg,
+	.config_init	= b53_phy_config_init,
+	.read_status	= b53_phy_read_status,
+	.driver = {
+		.owner = THIS_MODULE,
+	},
+};
+
+/* BCM53125 */
+static struct phy_driver b53_phy_driver_id2 = {
+	.phy_id		= 0x03625c00,
+	.name		= "Broadcom B53 (2)",
+	.phy_id_mask	= 0x1ffffc00,
+	.features	= 0,
+	.probe		= b53_phy_probe,
+	.remove		= b53_phy_remove,
+	.config_aneg	= b53_phy_config_aneg,
+	.config_init	= b53_phy_config_init,
+	.read_status	= b53_phy_read_status,
+	.driver = {
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init b53_phy_driver_register(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&b53_phy_driver_id1);
+	if (ret)
+		return ret;
+
+	ret = phy_driver_register(&b53_phy_driver_id2);
+	if (ret)
+		phy_driver_unregister(&b53_phy_driver_id1);
+
+	return ret;
+}
+
+void __exit b53_phy_driver_unregister(void)
+{
+	phy_driver_unregister(&b53_phy_driver_id2);
+	phy_driver_unregister(&b53_phy_driver_id1);
+}
+
+module_init(b53_phy_driver_register);
+module_exit(b53_phy_driver_unregister);
+
+MODULE_DESCRIPTION("B53 MDIO access driver");
+MODULE_LICENSE("Dual BSD/GPL");