kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 128 deletions

diff --git a/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch b/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch
deleted file mode 100644
index dda463052f..0000000000
--- a/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Bcc: linux@mail.armlinux.org.uk
-Cc: linux-i2c@vger.kernel.org
-Subject: [PATCH 08/17] i2c: pxa: move private definitions to i2c-pxa.c
-MIME-Version: 1.0
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-Content-Type: text/plain; charset="utf-8"
-
-Move driver-private definitions out of the i2c-pxa.h platform data
-header file into the driver itself. Nothing outside of the driver
-makes use of these constants.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/i2c/busses/i2c-pxa.c          | 43 ++++++++++++++++++++++++
- include/linux/platform_data/i2c-pxa.h | 48 ---------------------------
- 2 files changed, 43 insertions(+), 48 deletions(-)
-
---- a/drivers/i2c/busses/i2c-pxa.c
-+++ b/drivers/i2c/busses/i2c-pxa.c
-@@ -86,6 +86,49 @@
- #define IWCR_HS_CNT2_SHIFT	10
- #define IWCR_HS_CNT2_MASK	(0x1F << IWCR_HS_CNT2_SHIFT)
- 
-+/* need a longer timeout if we're dealing with the fact we may well be
-+ * looking at a multi-master environment
-+ */
-+#define DEF_TIMEOUT             32
-+
-+#define BUS_ERROR               (-EREMOTEIO)
-+#define XFER_NAKED              (-ECONNREFUSED)
-+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
-+
-+/* ICR initialize bit values
-+ *
-+ * 15 FM     0 (100 kHz operation)
-+ * 14 UR     0 (No unit reset)
-+ * 13 SADIE  0 (Disables the unit from interrupting on slave addresses
-+ *              matching its slave address)
-+ * 12 ALDIE  0 (Disables the unit from interrupt when it loses arbitration
-+ *              in master mode)
-+ * 11 SSDIE  0 (Disables interrupts from a slave stop detected, in slave mode)
-+ * 10 BEIE   1 (Enable interrupts from detected bus errors, no ACK sent)
-+ *  9 IRFIE  1 (Enable interrupts from full buffer received)
-+ *  8 ITEIE  1 (Enables the I2C unit to interrupt when transmit buffer empty)
-+ *  7 GCD    1 (Disables i2c unit response to general call messages as a slave)
-+ *  6 IUE    0 (Disable unit until we change settings)
-+ *  5 SCLE   1 (Enables the i2c clock output for master mode (drives SCL)
-+ *  4 MA     0 (Only send stop with the ICR stop bit)
-+ *  3 TB     0 (We are not transmitting a byte initially)
-+ *  2 ACKNAK 0 (Send an ACK after the unit receives a byte)
-+ *  1 STOP   0 (Do not send a STOP)
-+ *  0 START  0 (Do not send a START)
-+ */
-+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-+
-+/* I2C status register init values
-+ *
-+ * 10 BED    1 (Clear bus error detected)
-+ *  9 SAD    1 (Clear slave address detected)
-+ *  7 IRF    1 (Clear IDBR Receive Full)
-+ *  6 ITE    1 (Clear IDBR Transmit Empty)
-+ *  5 ALD    1 (Clear Arbitration Loss Detected)
-+ *  4 SSD    1 (Clear Slave Stop Detected)
-+ */
-+#define I2C_ISR_INIT	0x7FF  /* status register init */
-+
- struct pxa_reg_layout {
- 	u32 ibmr;
- 	u32 idbr;
---- a/include/linux/platform_data/i2c-pxa.h
-+++ b/include/linux/platform_data/i2c-pxa.h
-@@ -7,54 +7,6 @@
- #ifndef _I2C_PXA_H_
- #define _I2C_PXA_H_
- 
--#if 0
--#define DEF_TIMEOUT             3
--#else
--/* need a longer timeout if we're dealing with the fact we may well be
-- * looking at a multi-master environment
--*/
--#define DEF_TIMEOUT             32
--#endif
--
--#define BUS_ERROR               (-EREMOTEIO)
--#define XFER_NAKED              (-ECONNREFUSED)
--#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
--
--/* ICR initialize bit values
--*
--*  15. FM       0 (100 Khz operation)
--*  14. UR       0 (No unit reset)
--*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
--*                                       matching its slave address)
--*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
--*                                       in master mode)
--*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
--*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
--*  9.  IRFIE    1 (Enable interrupts from full buffer received)
--*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
--*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
--*  6.  IUE      0 (Disable unit until we change settings)
--*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
--*  4.  MA       0 (Only send stop with the ICR stop bit)
--*  3.  TB       0 (We are not transmitting a byte initially)
--*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
--*  1.  STOP     0 (Do not send a STOP)
--*  0.  START    0 (Do not send a START)
--*
--*/
--#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
--
--/* I2C status register init values
-- *
-- * 10. BED      1 (Clear bus error detected)
-- * 9.  SAD      1 (Clear slave address detected)
-- * 7.  IRF      1 (Clear IDBR Receive Full)
-- * 6.  ITE      1 (Clear IDBR Transmit Empty)
-- * 5.  ALD      1 (Clear Arbitration Loss Detected)
-- * 4.  SSD      1 (Clear Slave Stop Detected)
-- */
--#define I2C_ISR_INIT	0x7FF  /* status register init */
--
- struct i2c_slave_client;
- 
- struct i2c_pxa_platform_data {