diff options
author | Tianling Shen <cnsztl@immortalwrt.org> | 2023-05-13 13:54:38 +0800 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-05-18 17:42:53 +0200 |
commit | 64afcbad3d69147b07dff2462e5645f2c193dee5 (patch) | |
tree | 8c6c239b1911d48ad92fa9deeda23db2579287e0 /target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch | |
parent | afff2feb28baecaaf368002d819fb63973cf778a (diff) | |
download | upstream-64afcbad3d69147b07dff2462e5645f2c193dee5.tar.gz upstream-64afcbad3d69147b07dff2462e5645f2c193dee5.tar.bz2 upstream-64afcbad3d69147b07dff2462e5645f2c193dee5.zip |
kernel: backport Motorcomm YT8521/YT8531 support
It will be used on NanoPi R2C and OrangePi R1 Plus LTS board.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Diffstat (limited to 'target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch')
-rw-r--r-- | target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch b/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch new file mode 100644 index 0000000000..9dce5a8add --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch @@ -0,0 +1,302 @@ +From 4ac94f728a588e7096dd5010cd7141a309ea7805 Mon Sep 17 00:00:00 2001 +From: Frank Sae <Frank.Sae@motor-comm.com> +Date: Thu, 2 Feb 2023 11:00:37 +0800 +Subject: [PATCH] net: phy: Add driver for Motorcomm yt8531 gigabit ethernet + phy + +Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have + verified the driver on AM335x platform with yt8531 board. On the + board, yt8531 gigabit ethernet phy works in utp mode, RGMII + interface, supports 1000M/100M/10M speeds, and wol(magic package). + +Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 208 +++++++++++++++++++++++++++++++++++- + 2 files changed, 207 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -245,7 +245,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs. ++ Currently supports YT85xx Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Motorcomm 8511/8521/8531S PHY driver. ++ * Motorcomm 8511/8521/8531/8531S PHY driver. + * + * Author: Peter Geis <pgwipeout@gmail.com> + * Author: Frank <Frank.Sae@motor-comm.com> +@@ -14,6 +14,7 @@ + + #define PHY_ID_YT8511 0x0000010a + #define PHY_ID_YT8521 0x0000011a ++#define PHY_ID_YT8531 0x4f51e91b + #define PHY_ID_YT8531S 0x4f51e91a + + /* YT8521/YT8531S Register Overview +@@ -517,6 +518,61 @@ err_restore_page: + return phy_restore_page(phydev, old_page, ret); + } + ++static int yt8531_set_wol(struct phy_device *phydev, ++ struct ethtool_wolinfo *wol) ++{ ++ const u16 mac_addr_reg[] = { ++ YTPHY_WOL_MACADDR2_REG, ++ YTPHY_WOL_MACADDR1_REG, ++ YTPHY_WOL_MACADDR0_REG, ++ }; ++ const u8 *mac_addr; ++ u16 mask, val; ++ int ret; ++ u8 i; ++ ++ if (wol->wolopts & WAKE_MAGIC) { ++ mac_addr = phydev->attached_dev->dev_addr; ++ ++ /* Store the device address for the magic packet */ ++ for (i = 0; i < 3; i++) { ++ ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i], ++ ((mac_addr[i * 2] << 8)) | ++ (mac_addr[i * 2 + 1])); ++ if (ret < 0) ++ return ret; ++ } ++ ++ /* Enable WOL feature */ ++ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; ++ val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ++ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, ++ mask, val); ++ if (ret < 0) ++ return ret; ++ ++ /* Enable WOL interrupt */ ++ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, ++ YTPHY_IER_WOL); ++ if (ret < 0) ++ return ret; ++ } else { ++ /* Disable WOL feature */ ++ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ++ ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, ++ mask, 0); ++ ++ /* Disable WOL interrupt */ ++ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, ++ YTPHY_IER_WOL, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int yt8511_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, YT8511_PAGE_SELECT); +@@ -767,6 +823,17 @@ static int ytphy_rgmii_clk_delay_config( + return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val); + } + ++static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev) ++{ ++ int ret; ++ ++ phy_lock_mdio_bus(phydev); ++ ret = ytphy_rgmii_clk_delay_config(phydev); ++ phy_unlock_mdio_bus(phydev); ++ ++ return ret; ++} ++ + /** + * yt8521_probe() - read chip config then set suitable polling_mode + * @phydev: a pointer to a &struct phy_device +@@ -891,6 +958,43 @@ static int yt8521_probe(struct phy_devic + val); + } + ++static int yt8531_probe(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ u16 mask, val; ++ u32 freq; ++ ++ if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) ++ freq = YTPHY_DTS_OUTPUT_CLK_DIS; ++ ++ switch (freq) { ++ case YTPHY_DTS_OUTPUT_CLK_DIS: ++ mask = YT8531_SCR_SYNCE_ENABLE; ++ val = 0; ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_25M: ++ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_REF_25M); ++ break; ++ case YTPHY_DTS_OUTPUT_CLK_125M: ++ mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | ++ YT8531_SCR_CLK_FRE_SEL_125M; ++ val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | ++ FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, ++ YT8531_SCR_CLK_SRC_PLL_125M); ++ break; ++ default: ++ phydev_warn(phydev, "Freq err:%u\n", freq); ++ return -EINVAL; ++ } ++ ++ return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, ++ val); ++} ++ + /** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device +@@ -1387,6 +1491,94 @@ err_restore_page: + return phy_restore_page(phydev, old_page, ret); + } + ++static int yt8531_config_init(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ int ret; ++ ++ ret = ytphy_rgmii_clk_delay_config_with_lock(phydev); ++ if (ret < 0) ++ return ret; ++ ++ if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { ++ /* disable auto sleep */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_EXTREG_SLEEP_CONTROL1_REG, ++ YT8521_ESC1R_SLEEP_SW, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { ++ /* enable RXC clock when no wire plug */ ++ ret = ytphy_modify_ext_with_lock(phydev, ++ YT8521_CLOCK_GATING_REG, ++ YT8521_CGR_RX_CLK_EN, 0); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/** ++ * yt8531_link_change_notify() - Adjust the tx clock direction according to ++ * the current speed and dts config. ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please ++ * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not ++ * JH7110. ++ */ ++static void yt8531_link_change_notify(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ bool tx_clk_adj_enabled = false; ++ bool tx_clk_1000_inverted; ++ bool tx_clk_100_inverted; ++ bool tx_clk_10_inverted; ++ u16 val = 0; ++ int ret; ++ ++ if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled")) ++ tx_clk_adj_enabled = true; ++ ++ if (!tx_clk_adj_enabled) ++ return; ++ ++ if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted")) ++ tx_clk_10_inverted = true; ++ if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted")) ++ tx_clk_100_inverted = true; ++ if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted")) ++ tx_clk_1000_inverted = true; ++ ++ if (phydev->speed < 0) ++ return; ++ ++ switch (phydev->speed) { ++ case SPEED_1000: ++ if (tx_clk_1000_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ case SPEED_100: ++ if (tx_clk_100_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ case SPEED_10: ++ if (tx_clk_10_inverted) ++ val = YT8521_RC1R_TX_CLK_SEL_INVERTED; ++ break; ++ default: ++ return; ++ } ++ ++ ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG, ++ YT8521_RC1R_TX_CLK_SEL_INVERTED, val); ++ if (ret < 0) ++ phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret); ++} ++ + /** + * yt8521_prepare_fiber_features() - A small helper function that setup + * fiber's features. +@@ -1970,6 +2162,17 @@ static struct phy_driver motorcomm_phy_d + .resume = yt8521_resume, + }, + { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8531), ++ .name = "YT8531 Gigabit Ethernet", ++ .probe = yt8531_probe, ++ .config_init = yt8531_config_init, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .get_wol = ytphy_get_wol, ++ .set_wol = yt8531_set_wol, ++ .link_change_notify = yt8531_link_change_notify, ++ }, ++ { + PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), + .name = "YT8531S Gigabit Ethernet", + .get_features = yt8521_get_features, +@@ -1990,7 +2193,7 @@ static struct phy_driver motorcomm_phy_d + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver"); + MODULE_AUTHOR("Peter Geis"); + MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); +@@ -1998,6 +2201,7 @@ MODULE_LICENSE("GPL"); + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, + { /* sentinel */ } + }; |