generic: 5.15: replace ramips AR8033 fiber patch with 5.18 patches

A patch was added in kernel 5.4 to support the fiber operation of
AR8033 with ramips devices. In kernel 5.18 similar enhancements
were added to the kernel. Those patches are required for other
fiber based devices but when added, build fails for ramips targets.
This commit removes the ramips patch and adds the kernel 5.18 ones.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
[ split commit,refresh patch and improve commit message ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

1 files changed, 56 insertions, 0 deletions

diff --git a/target/linux/generic/backport-5.15/778-v5.18-03-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch b/target/linux/generic/backport-5.15/778-v5.18-03-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch
new file mode 100644
index 0000000000..de8951db10
--- /dev/null
+++ b/target/linux/generic/backport-5.15/778-v5.18-03-net-phy-at803x-fix-NULL-pointer-dereference-on-AR9331-PHY.patch
@@ -0,0 +1,56 @@
+From 9926de7315be3d606cc011a305ad9adb9e8e14c9 Mon Sep 17 00:00:00 2001
+From: Oleksij Rempel <o.rempel@pengutronix.de>
+Date: Sat, 18 Jun 2022 14:23:33 +0200
+Subject: [PATCH] net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
+
+Latest kernel will explode on the PHY interrupt config, since it depends
+now on allocated priv. So, run probe to allocate priv to fix it.
+
+ ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
+ CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
+         ...
+ Call Trace:
+ [<8050e8a8>] at803x_config_intr+0x5c/0xd0
+ [<80504b34>] phy_request_interrupt+0xa8/0xd0
+ [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
+ [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
+ [<8074d8ec>] dsa_slave_create+0x270/0x420
+ [<80743b04>] dsa_port_setup+0x12c/0x148
+ [<8074580c>] dsa_register_switch+0xaf0/0xcc0
+ [<80511344>] ar9331_sw_probe+0x370/0x388
+ [<8050cb78>] mdio_probe+0x44/0x70
+ [<804df300>] really_probe+0x200/0x424
+ [<804df7b4>] __driver_probe_device+0x290/0x298
+ [<804df810>] driver_probe_device+0x54/0xe4
+ [<804dfd50>] __device_attach_driver+0xe4/0x130
+ [<804dcb00>] bus_for_each_drv+0xb4/0xd8
+ [<804dfac4>] __device_attach+0x104/0x1a4
+ [<804ddd24>] bus_probe_device+0x48/0xc4
+ [<804deb44>] deferred_probe_work_func+0xf0/0x10c
+ [<800a0ffc>] process_one_work+0x314/0x4d4
+ [<800a17fc>] worker_thread+0x2a4/0x354
+ [<800a9a54>] kthread+0x134/0x13c
+ [<8006306c>] ret_from_kernel_thread+0x14/0x1c
+
+Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
+too.
+
+Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
+Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/at803x.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -1594,6 +1594,8 @@ static struct phy_driver at803x_driver[]
+ 	/* ATHEROS AR9331 */
+ 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
+ 	.name			= "Qualcomm Atheros AR9331 built-in PHY",
++	.probe			= at803x_probe,
++	.remove			= at803x_remove,
+ 	.suspend		= at803x_suspend,
+ 	.resume			= at803x_resume,
+ 	.flags			= PHY_POLL_CABLE_TEST,