kernel: 5.10: compress 7xx patch numbering

The qca8k patch series brings the numbering to 799. This patch renames
7xx patches to create space for more backports to be added.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
[rename 729->719]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 153 deletions

diff --git a/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch b/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch
deleted file mode 100644
index 320db8fa9f..0000000000
--- a/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 3fcf734aa482487df83cf8f18608438fcf59127f Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Thu, 14 Oct 2021 00:39:10 +0200
-Subject: net: dsa: qca8k: add support for cpu port 6
-
-Currently CPU port is always hardcoded to port 0. This switch have 2 CPU
-ports. The original intention of this driver seems to be use the
-mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration
-where device have connected only the CPU port 6. To skip the
-introduction of a new binding, rework the driver to address the
-secondary CPU port as primary and drop any reference of hardcoded port.
-With configuration of mac06 exchange, just skip the definition of port0
-and define the CPU port as a secondary. The driver will autoconfigure
-the switch to use that as the primary CPU port.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca8k.c | 51 ++++++++++++++++++++++++++++++++++---------------
- drivers/net/dsa/qca8k.h |  2 --
- 2 files changed, 36 insertions(+), 17 deletions(-)
-
---- a/drivers/net/dsa/qca8k.c
-+++ b/drivers/net/dsa/qca8k.c
-@@ -977,6 +977,22 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri
- 	return ret;
- }
- 
-+static int qca8k_find_cpu_port(struct dsa_switch *ds)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+
-+	/* Find the connected cpu port. Valid port are 0 or 6 */
-+	if (dsa_is_cpu_port(ds, 0))
-+		return 0;
-+
-+	dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
-+
-+	if (dsa_is_cpu_port(ds, 6))
-+		return 6;
-+
-+	return -EINVAL;
-+}
-+
- static int
- qca8k_parse_port_config(struct qca8k_priv *priv)
- {
-@@ -1017,13 +1033,13 @@ static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int ret, i;
-+	int cpu_port, ret, i;
- 	u32 mask;
- 
--	/* Make sure that port 0 is the cpu port */
--	if (!dsa_is_cpu_port(ds, 0)) {
--		dev_err(priv->dev, "port 0 is not the CPU port");
--		return -EINVAL;
-+	cpu_port = qca8k_find_cpu_port(ds);
-+	if (cpu_port < 0) {
-+		dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
-+		return cpu_port;
- 	}
- 
- 	/* Parse CPU port config to be later used in phy_link mac_config */
-@@ -1065,7 +1081,7 @@ qca8k_setup(struct dsa_switch *ds)
- 		dev_warn(priv->dev, "mib init failed");
- 
- 	/* Enable QCA header mode on the cpu port */
--	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
-+	ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
- 			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- 			  QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
- 	if (ret) {
-@@ -1087,10 +1103,10 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 	/* Forward all unknown frames to CPU port for Linux processing */
- 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
--			  BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
-+			  BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
- 	if (ret)
- 		return ret;
- 
-@@ -1098,7 +1114,7 @@ qca8k_setup(struct dsa_switch *ds)
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- 		/* CPU port gets connected to all user ports of the switch */
- 		if (dsa_is_cpu_port(ds, i)) {
--			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
-+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
- 					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
- 			if (ret)
- 				return ret;
-@@ -1110,7 +1126,7 @@ qca8k_setup(struct dsa_switch *ds)
- 
- 			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- 					QCA8K_PORT_LOOKUP_MEMBER,
--					BIT(QCA8K_CPU_PORT));
-+					BIT(cpu_port));
- 			if (ret)
- 				return ret;
- 
-@@ -1616,9 +1632,12 @@ static int
- qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int port_mask = BIT(QCA8K_CPU_PORT);
-+	int port_mask, cpu_port;
- 	int i, ret;
- 
-+	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
-+	port_mask = BIT(cpu_port);
-+
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
- 			continue;
-@@ -1645,7 +1664,9 @@ static void
- qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int i;
-+	int cpu_port, i;
-+
-+	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- 
- 	for (i = 1; i < QCA8K_NUM_PORTS; i++) {
- 		if (dsa_to_port(ds, i)->bridge_dev != br)
-@@ -1662,7 +1683,7 @@ qca8k_port_bridge_leave(struct dsa_switc
- 	 * this port
- 	 */
- 	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
--		  QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT));
-+		  QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
- }
- 
- static int
---- a/drivers/net/dsa/qca8k.h
-+++ b/drivers/net/dsa/qca8k.h
-@@ -24,8 +24,6 @@
- 
- #define QCA8K_NUM_FDB_RECORDS				2048
- 
--#define QCA8K_CPU_PORT					0
--
- #define QCA8K_PORT_VID_DEF				1
- 
- /* Global control registers */