aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-04-20 02:53:04 +0000
committerFelix Fietkau <nbd@openwrt.org>2008-04-20 02:53:04 +0000
commita323a7bf2a131761180a1ffe01928dc2e7804837 (patch)
tree89fef6ba6d25ffb5ac881b53b2a7db10421af652 /target/linux/generic-2.6
parent27d341022c302a5d12e3cdad035358a20f72e3e1 (diff)
downloadupstream-a323a7bf2a131761180a1ffe01928dc2e7804837.tar.gz
upstream-a323a7bf2a131761180a1ffe01928dc2e7804837.tar.bz2
upstream-a323a7bf2a131761180a1ffe01928dc2e7804837.zip
Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a
SVN-Revision: 10869
Diffstat (limited to 'target/linux/generic-2.6')
-rw-r--r--target/linux/generic-2.6/config-2.6.231
-rw-r--r--target/linux/generic-2.6/files/drivers/net/phy/adm6996.c170
-rw-r--r--target/linux/generic-2.6/files/drivers/net/phy/adm6996.h105
-rw-r--r--target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch30
-rw-r--r--target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch26
5 files changed, 332 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/config-2.6.23 b/target/linux/generic-2.6/config-2.6.23
index d6d982e40d..baac771313 100644
--- a/target/linux/generic-2.6/config-2.6.23
+++ b/target/linux/generic-2.6/config-2.6.23
@@ -5,6 +5,7 @@
# CONFIG_ACORN_PARTITION is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
# CONFIG_AFFS_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_AF_RXRPC is not set
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/adm6996.c b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.c
new file mode 100644
index 0000000000..3033813ec0
--- /dev/null
+++ b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.c
@@ -0,0 +1,170 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "adm6996.h"
+
+MODULE_DESCRIPTION("Infineon ADM6996 Switch");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+struct adm6996_priv {
+ /* use abstraction for regops, we want to add gpio support in the future */
+ u16 (*read)(struct phy_device *phydev, enum admreg reg);
+ void (*write)(struct phy_device *phydev, enum admreg reg, u16 val);
+};
+
+#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
+
+
+static inline u16
+r16(struct phy_device *pdev, enum admreg reg)
+{
+ return to_adm(pdev)->read(pdev, reg);
+}
+
+static inline void
+w16(struct phy_device *pdev, enum admreg reg, u16 val)
+{
+ to_adm(pdev)->write(pdev, reg, val);
+}
+
+
+static u16
+adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg)
+{
+ return phydev->bus->read(phydev->bus, PHYADDR(reg));
+}
+
+static void
+adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val)
+{
+ phydev->bus->write(phydev->bus, PHYADDR(reg), val);
+}
+
+
+static int adm6996_config_init(struct phy_device *pdev)
+{
+ int i;
+
+ printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name);
+ pdev->supported = ADVERTISED_100baseT_Full;
+ pdev->advertising = ADVERTISED_100baseT_Full;
+
+ /* initialize port and vlan settings */
+ for (i = 0; i < ADM_PHY_PORTS; i++) {
+ w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT |
+ ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0));
+ }
+ w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU);
+
+ /* reset all ports */
+ for (i = 0; i < ADM_PHY_PORTS; i++) {
+ w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT);
+ }
+
+ return 0;
+}
+
+static int adm6996_read_status(struct phy_device *phydev)
+{
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+ phydev->state = PHY_UP;
+ return 0;
+}
+
+static int adm6996_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int adm6996_probe(struct phy_device *pdev)
+{
+ struct adm6996_priv *priv;
+
+ priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ priv->read = adm6996_read_mii_reg;
+ priv->write = adm6996_write_mii_reg;
+ pdev->priv = priv;
+ return 0;
+}
+
+static void adm6996_remove(struct phy_device *pdev)
+{
+ kfree(pdev->priv);
+}
+
+static bool adm6996_detect(struct mii_bus *bus, int addr)
+{
+ u16 reg;
+
+ /* we only attach to phy id 0 */
+ if (addr != 0)
+ return false;
+
+ /* look for the switch on the bus */
+ reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK;
+ if (reg != ADM_SIG0_VAL)
+ return false;
+
+ reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK;
+ if (reg != ADM_SIG1_VAL)
+ return false;
+
+ return true;
+}
+
+static struct phy_driver adm6996_driver = {
+ .name = "Infineon ADM6996",
+ .features = PHY_BASIC_FEATURES,
+ .detect = adm6996_detect,
+ .probe = adm6996_probe,
+ .remove = adm6996_remove,
+ .config_init = &adm6996_config_init,
+ .config_aneg = &adm6996_config_aneg,
+ .read_status = &adm6996_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init adm6996_init(void)
+{
+ return phy_driver_register(&adm6996_driver);
+}
+
+static void __exit adm6996_exit(void)
+{
+ phy_driver_unregister(&adm6996_driver);
+}
+
+module_init(adm6996_init);
+module_exit(adm6996_exit);
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.h
new file mode 100644
index 0000000000..e074901517
--- /dev/null
+++ b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.h
@@ -0,0 +1,105 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#ifndef __ADM6996_H
+#define __ADM6996_H
+
+#define ADM_PHY_PORTS 5
+#define ADM_CPU_PORT 5
+#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */
+
+enum admreg {
+ ADM_EEPROM_BASE = 0x0,
+ ADM_P0_CFG = ADM_EEPROM_BASE + 1,
+ ADM_P1_CFG = ADM_EEPROM_BASE + 3,
+ ADM_P2_CFG = ADM_EEPROM_BASE + 5,
+ ADM_P3_CFG = ADM_EEPROM_BASE + 7,
+ ADM_P4_CFG = ADM_EEPROM_BASE + 8,
+ ADM_P5_CFG = ADM_EEPROM_BASE + 9,
+ ADM_EEPROM_EXT_BASE = 0x40,
+ ADM_COUNTER_BASE = 0xa0,
+ ADM_SIG0 = ADM_COUNTER_BASE + 0,
+ ADM_SIG1 = ADM_COUNTER_BASE + 1,
+ ADM_PHY_BASE = 0x200,
+#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
+};
+
+/* Chip identification patterns */
+#define ADM_SIG0_MASK 0xfff0
+#define ADM_SIG0_VAL 0x1020
+#define ADM_SIG1_MASK 0xffff
+#define ADM_SIG1_VAL 0x0007
+
+enum {
+ ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */
+ ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */
+ ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */
+ ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */
+ ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */
+ ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */
+ ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */
+ ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */
+ ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */
+ ADM_PHYCFG_INIT = (
+ ADM_PHYCFG_RST |
+ ADM_PHYCFG_SPEED_100 |
+ ADM_PHYCFG_ANEN |
+ ADM_PHYCFG_ANEN_RST
+ )
+};
+
+enum {
+ ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */
+ ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */
+ ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */
+ ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */
+ ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */
+ ADM_PORTCFG_PD = (1 << 5), /* Port disable */
+ ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority
+ * 1 = TOS based priority */
+ ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */
+ ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */
+ ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */
+ ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */
+ ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */
+
+ ADM_PORTCFG_INIT = (
+ ADM_PORTCFG_FC |
+ ADM_PORTCFG_AN |
+ ADM_PORTCFG_SPEED_100 |
+ ADM_PORTCFG_DPLX |
+ ADM_PORTCFG_CAM
+ ),
+ ADM_PORTCFG_CPU = (
+ ADM_PORTCFG_FC |
+ ADM_PORTCFG_SPEED_100 |
+ ADM_PORTCFG_OT |
+ ADM_PORTCFG_DPLX
+ ),
+};
+
+#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
+#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
+
+static const u8 adm_portcfg[] = {
+ [0] = ADM_P0_CFG,
+ [1] = ADM_P1_CFG,
+ [2] = ADM_P2_CFG,
+ [3] = ADM_P3_CFG,
+ [4] = ADM_P4_CFG,
+ [5] = ADM_P5_CFG,
+};
+
+/*
+ * Split the register address in phy id and register
+ * it will get combined again by the mdio bus op
+ */
+#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f)
+
+#endif
diff --git a/target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch b/target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch
new file mode 100644
index 0000000000..394cd3704c
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch
@@ -0,0 +1,30 @@
+Index: linux-2.6.23.16/drivers/net/phy/mdio_bus.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/mdio_bus.c 2008-02-11 07:06:32.000000000 +0100
++++ linux-2.6.23.16/drivers/net/phy/mdio_bus.c 2008-04-20 01:55:46.000000000 +0200
+@@ -131,6 +131,9 @@
+ struct phy_device *phydev = to_phy_device(dev);
+ struct phy_driver *phydrv = to_phy_driver(drv);
+
++ if (phydrv->detect)
++ return (phydrv->detect(phydev->bus, phydev->addr));
++
+ return ((phydrv->phy_id & phydrv->phy_id_mask) ==
+ (phydev->phy_id & phydrv->phy_id_mask));
+ }
+Index: linux-2.6.23.16/include/linux/phy.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/phy.h 2008-04-20 00:36:18.000000000 +0200
++++ linux-2.6.23.16/include/linux/phy.h 2008-04-20 01:55:04.000000000 +0200
+@@ -319,6 +319,11 @@
+ u32 features;
+ u32 flags;
+
++ /* Called during discovery to test if the
++ * device can attach to the bus, even if
++ * phy id and mask do not match */
++ bool (*detect)(struct mii_bus *bus, int addr);
++
+ /* Called to initialize the PHY,
+ * including after a reset */
+ int (*config_init)(struct phy_device *phydev);
diff --git a/target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch b/target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch
new file mode 100644
index 0000000000..299739237b
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch
@@ -0,0 +1,26 @@
+Index: linux-2.6.23.16/drivers/net/phy/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/Kconfig 2008-04-20 04:40:22.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/Kconfig 2008-04-20 04:40:32.000000000 +0200
+@@ -60,6 +60,11 @@
+ ---help---
+ Currently supports the IP175C PHY.
+
++config ADM6996_PHY
++ tristate "Driver for ADM6996 switches"
++ ---help---
++ Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ tristate "Drivers for PHY emulation on fixed speed/link"
+ ---help---
+Index: linux-2.6.23.16/drivers/net/phy/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/Makefile 2008-04-20 04:40:22.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/Makefile 2008-04-20 04:40:32.000000000 +0200
+@@ -12,4 +12,5 @@
+ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
++obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_FIXED_PHY) += fixed.o