Remove 2.6.22 files, no target uses them anymore

SVN-Revision: 12638

1 files changed, 0 insertions, 175 deletions

diff --git a/target/linux/generic-2.6/patches-2.6.22/999-icplus.patch b/target/linux/generic-2.6/patches-2.6.22/999-icplus.patch
deleted file mode 100644
index d38df05529..0000000000
--- a/target/linux/generic-2.6/patches-2.6.22/999-icplus.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From: Michael Barkowski <michael.barkowski@freescale.com>
-Date: Fri, 11 May 2007 23:24:51 +0000 (-0500)
-Subject: phylib: add the ICPlus IP175C PHY driver
-X-Git-Tag: v2.6.23-rc1~1201^2~58
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=0cefeebaf3da39d768bffcf62460fe2088e824ef
-
-phylib: add the ICPlus IP175C PHY driver
-
-The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition
-to a dedicated 100Mbit/s WAN port.
-
-Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
-Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-Signed-off-by: Jeff Garzik <jeff@garzik.org>
----
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -55,6 +55,11 @@
- 	---help---
- 	  Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
- 
-+config ICPLUS_PHY
-+	tristate "Drivers for ICPlus PHYs"
-+	---help---
-+	  Currently supports the IP175C PHY.
-+
- config FIXED_PHY
- 	tristate "Drivers for PHY emulation on fixed speed/link"
- 	---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -11,4 +11,5 @@
- obj-$(CONFIG_SMSC_PHY)		+= smsc.o
- obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
- obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
-+obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
---- /dev/null
-+++ b/drivers/net/phy/icplus.c
-@@ -0,0 +1,134 @@
-+/*
-+ * Driver for ICPlus PHYs
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/errno.h>
-+#include <linux/unistd.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/spinlock.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/phy.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/uaccess.h>
-+
-+MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
-+MODULE_AUTHOR("Michael Barkowski");
-+MODULE_LICENSE("GPL");
-+
-+static int ip175c_config_init(struct phy_device *phydev)
-+{
-+	int err, i;
-+	static int full_reset_performed = 0;
-+
-+	if (full_reset_performed == 0) {
-+
-+		/* master reset */
-+		err = phydev->bus->write(phydev->bus, 30, 0, 0x175c);
-+		if (err < 0)
-+			return err;
-+
-+		/* ensure no bus delays overlap reset period */
-+		err = phydev->bus->read(phydev->bus, 30, 0);
-+
-+		/* data sheet specifies reset period is 2 msec */
-+		mdelay(2);
-+
-+		/* enable IP175C mode */
-+		err = phydev->bus->write(phydev->bus, 29, 31, 0x175c);
-+		if (err < 0)
-+			return err;
-+
-+		/* Set MII0 speed and duplex (in PHY mode) */
-+		err = phydev->bus->write(phydev->bus, 29, 22, 0x420);
-+		if (err < 0)
-+			return err;
-+
-+		/* reset switch ports */
-+		for (i = 0; i < 5; i++) {
-+			err = phydev->bus->write(phydev->bus, i,
-+						 MII_BMCR, BMCR_RESET);
-+			if (err < 0)
-+				return err;
-+		}
-+
-+		for (i = 0; i < 5; i++)
-+			err = phydev->bus->read(phydev->bus, i, MII_BMCR);
-+
-+		mdelay(2);
-+
-+		full_reset_performed = 1;
-+	}
-+
-+	if (phydev->addr != 4) {
-+		phydev->state = PHY_RUNNING;
-+		phydev->speed = SPEED_100;
-+		phydev->duplex = DUPLEX_FULL;
-+		phydev->link = 1;
-+		netif_carrier_on(phydev->attached_dev);
-+	}
-+
-+	return 0;
-+}
-+
-+static int ip175c_read_status(struct phy_device *phydev)
-+{
-+	if (phydev->addr == 4) /* WAN port */
-+		genphy_read_status(phydev);
-+	else
-+		/* Don't need to read status for switch ports */
-+		phydev->irq = PHY_IGNORE_INTERRUPT;
-+
-+	return 0;
-+}
-+
-+static int ip175c_config_aneg(struct phy_device *phydev)
-+{
-+	if (phydev->addr == 4) /* WAN port */
-+		genphy_config_aneg(phydev);
-+
-+	return 0;
-+}
-+
-+static struct phy_driver ip175c_driver = {
-+	.phy_id		= 0x02430d80,
-+	.name		= "ICPlus IP175C",
-+	.phy_id_mask	= 0x0ffffff0,
-+	.features	= PHY_BASIC_FEATURES,
-+	.config_init	= &ip175c_config_init,
-+	.config_aneg	= &ip175c_config_aneg,
-+	.read_status	= &ip175c_read_status,
-+	.driver		= { .owner = THIS_MODULE,},
-+};
-+
-+static int __init ip175c_init(void)
-+{
-+	return phy_driver_register(&ip175c_driver);
-+}
-+
-+static void __exit ip175c_exit(void)
-+{
-+	phy_driver_unregister(&ip175c_driver);
-+}
-+
-+module_init(ip175c_init);
-+module_exit(ip175c_exit);