removed fox-vhdl patch, it will return with .22

SVN-Revision: 8215

1 files changed, 0 insertions, 4836 deletions

diff --git a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch b/target/linux/etrax-2.6/patches/cris/019-vhdl.patch
deleted file mode 100644
index 95478f8280..0000000000
--- a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch
+++ /dev/null
@@ -1,4836 +0,0 @@
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,533 @@
-+/*  
-+  foxbone.c
-+  Linux Kernel Driver for FoxBone on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+#include <linux/spinlock.h>
-+#include <linux/autoconf.h>
-+#include <linux/interrupt.h>
-+#include <asm/etraxgpio.h>
-+#include <asm/arch/svinto.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+#include <asm/irq.h>
-+#include <asm/arch/io_interface_mux.h>
-+
-+
-+#include "foxbone.h"
-+#include "foxbone_userspace.h"
-+
-+
-+#define Fox_line_Read             	(1<<1)
-+#define Fox_line_WriteData        	(1<<2)
-+#define Fox_line_Reset            	(1<<3)
-+#define Fox_line_WriteAddress     	(1<<4)
-+
-+#define FOX_CLEAR_LINES			(~(0x00FFFF00 | Fox_line_Read | Fox_line_WriteAddress | Fox_line_WriteData))
-+
-+#define DEV_NAME 			"foxbone"
-+#define DEV_MAJOR 			14
-+
-+spinlock_t foxbone_lock_var = SPIN_LOCK_UNLOCKED;
-+unsigned long foxbone_irq_flags;
-+// is the userspce device enables ?
-+unsigned char foxbone_userspace_is_open = 0;
-+
-+// are we processing interrupts ? (during fpga_flash the ints are not allowed to be handles
-+unsigned char foxbone_allow_int;
-+
-+// the shadow of which ints are enabled
-+unsigned int foxbone_shadow_int_high = 0;
-+unsigned int foxbone_shadow_int_low = 0;
-+
-+// the following four variables get filled when the foxbone driver is started
-+// they hold the release and the the application words
-+unsigned int FOXBONE_release = 0;
-+unsigned int FOXBONE_application1 = 0;
-+unsigned int FOXBONE_application2 = 0;
-+unsigned int FOXBONE_application3 = 0;
-+
-+
-+
-+FOXINT_CALLBACK foxint_callbacks[32];
-+
-+unsigned int foxbone_read(unsigned int add);
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+static irqreturn_t foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+
-+unsigned int foxbone_interrupt_enabled = 0;
-+
-+
-+	
-+void FOX_delay(unsigned int d){
-+	while(d--){
-+		unsigned int i = 0;
-+		for(i = 0; i < 32000; i++){
-+			i*=2;
-+			i/=2;
-+		};
-+	};
-+};
-+
-+
-+void foxbone_lock(void){
-+	spin_lock_irqsave(&foxbone_lock_var, foxbone_irq_flags);
-+
-+};
-+
-+void foxbone_unlock(void){
-+	spin_unlock_irqrestore(&foxbone_lock_var, foxbone_irq_flags);
-+
-+};
-+
-+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback){
-+	if(irq > 31){
-+		printk("foxbone: trying to register invalid interrupt\n");
-+		return 0;
-+	};
-+	if(!foxbone_interrupt_enabled){
-+		foxbone_interrupt_enabled = 1;
-+		printk("foxbone: starting interrupt system\n");				
-+		int err;
-+	        if ((err = request_irq(PA_IRQ_NBR, foxbone_pa_interrupt, SA_INTERRUPT | SA_SHIRQ, "foxbone", 123))){
-+			printk("foxbone: request_irq failed: Error %d\n",err);
-+	        	return ;
-+		}
-+		printk("foxbone: request_irq success -> irq: %ld\n",PA_IRQ_NBR);
-+		*R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);	
-+	};	
-+	
-+	printk("foxbone: new int %d registered\n", irq);
-+	foxint_callbacks[irq] = callback;
-+	if(irq < 15){
-+		foxbone_shadow_int_high |= (1<<irq);
-+		foxbone_write(0x08, foxbone_shadow_int_high);
-+	} else {
-+		foxbone_shadow_int_high |= (1<<15);
-+		foxbone_write(0x08, foxbone_shadow_int_high);
-+		foxbone_shadow_int_low |= (1<<(irq-16));
-+		foxbone_write(0x09, foxbone_shadow_int_low);
-+	};
-+	return 1;	
-+};
-+
-+
-+void foxbone_unregister_interrupt(unsigned char irq){
-+	if(irq > 31){
-+		printk("foxbone: trying to unregister invalid interrupt\n");
-+		return ;
-+	};
-+	printk("foxbone: interrupt %d unregistered\n", irq);
-+	if(irq < 15){
-+		foxbone_shadow_int_high &= ~(1<<irq);
-+		foxbone_write(0x08, foxbone_shadow_int_high);
-+	} else {
-+		foxbone_shadow_int_low &= ~(1<<(irq-16));
-+		foxbone_write(0x09, foxbone_shadow_int_low);
-+
-+		if(!foxbone_shadow_int_low){
-+			foxbone_shadow_int_high &= ~(1<<15);
-+			foxbone_write(0x08, foxbone_shadow_int_high);
-+		};
-+	};
-+};
-+
-+#if 0
-+#define DBG_INT(x) x
-+#else
-+#define DBG_INT(x)
-+#endif
-+
-+// this is the bottom half of our interrupt handler
-+static void foxbone_handle_interrupt(void){
-+	if(foxbone_allow_int){
-+		foxbone_lock();
-+		unsigned int irq_high, irq_low, i;
-+		DBG_INT(printk("Int handler");)
-+		if(*R_PORT_PA_DATA & (1)){
-+			irq_high = foxbone_read(0x08);
-+			DBG_INT(printk("Got high_int %d\n", irq_high);)
-+			for(i = 0; i < 15; i++){
-+				if(irq_high & (1<<i)){
-+					DBG_INT(printk("Go high_int %d\n",i);)
-+					if(foxint_callbacks[i]){
-+						foxint_callbacks[i](i);
-+					};
-+				};
-+			};
-+			if(irq_high & (0x8000)){
-+				irq_low = foxbone_read(0x09);
-+				DBG_INT(printk("Got low_int %d\n", irq_low);)
-+				for(i = 0; i < 16; i++){
-+					if(irq_low & (1<<i)){
-+						DBG_INT(printk("Go low_int %d\n", i);)
-+						if(foxint_callbacks[i+16]){
-+							foxint_callbacks[i+16](i+16);
-+						};
-+					};
-+				};
-+
-+			};
-+		};
-+		foxbone_unlock();
-+	};
-+};
-+
-+// this is the top half of our interrupt handler
-+static void tasklet_foxbone_int(unsigned long data);
-+DECLARE_TASKLET(tl_foxint_descr, tasklet_foxbone_int, 0L);
-+static void tasklet_foxbone_int(unsigned long data){
-+	
-+	DBG_INT(printk("got an int\n");)
-+	foxbone_handle_interrupt();
-+	
-+}; 
-+
-+
-+static irqreturn_t
-+foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{	
-+	unsigned long tmp;
-+	
-+	/* Find what PA interrupts are active */
-+	tmp = (*R_IRQ_READ1);
-+//	printk("_____%ud",*R_IRQ_READ1);
-+	/* Find those that we have enabled */
-+//	tmp &= (1 << R_IRQ_MASK1_SET__pa0__BITNR);
-+
-+	/* Clear them.. */
-+	// *R_IRQ_MASK1_CLR = tmp;
-+	//(1 << R_IRQ_MASK1_SET__pa0__BITNR);
-+	
-+	tasklet_schedule(&tl_foxint_descr);
-+	// *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);
-+	
-+        return IRQ_RETVAL(1);
-+}
-+
-+
-+static void foxbone_bus_in(void){
-+	// turn all the iog8-15 pins into outputs
-+	genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir);
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	
-+	// turn all the iog16-23 pins into outputs
-+	genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir);
-+	*R_GEN_CONFIG = genconfig_shadow;	
-+};
-+
-+static void foxbone_bus_out(void){
-+	// turn all the iog8-15 pins into outputs
-+	genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+	*R_GEN_CONFIG = genconfig_shadow;
-+	
-+	// turn all the iog16-23 pins into outputs
-+	genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+	*R_GEN_CONFIG = genconfig_shadow;	
-+};
-+
-+void foxbone_reset(unsigned char reset){
-+	if(reset){
-+		*R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Reset;
-+	} else {
-+		*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Reset;
-+	};
-+};
-+
-+static void foxbone_setadd(unsigned long address){
-+	*R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+
-+	*R_PORT_G_DATA = port_g_data_shadow |= (address << 8)| Fox_line_WriteAddress;
-+
-+	*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteAddress; 
-+};
-+
-+
-+static unsigned int foxbone_read_data(unsigned char next){
-+	unsigned int data;
-+	*R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+
-+	foxbone_bus_in();
-+	
-+	*R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Read;
-+	
-+	// do the reading now
-+	data = 	*R_PORT_G_DATA;
-+	data = 	*R_PORT_G_DATA;
-+	
-+	// now return the Fox_line_ReadData to low state to idle the bus from the FPGA side
-+	*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Read;
-+	foxbone_bus_out();
-+	return ((unsigned int)((data&0x00FFFF00)>>8));
-+}
-+
-+
-+static unsigned int foxbone_write_data(unsigned int data, unsigned char next) {
-+	// clear all address/data/control bits
-+	*R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; 
-+
-+	*R_PORT_G_DATA = port_g_data_shadow |= (data << 8)| Fox_line_WriteData;
-+	*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+	
-+	return 0;
-+}
-+
-+void foxbone_write(unsigned int add, unsigned int data){
-+	foxbone_setadd(add);
-+	foxbone_write_data(data, 0);
-+};
-+
-+unsigned int foxbone_read(unsigned int add){
-+	foxbone_setadd(add);
-+	return foxbone_read_data(0);
-+};
-+
-+void foxbone_write_next(unsigned data){
-+	foxbone_write_data(data, 1);
-+};
-+
-+unsigned int foxbone_read_next(void){
-+	return foxbone_read_data(1);
-+};
-+
-+void foxbone_bulk_write(unsigned int *data, unsigned int length, unsigned int add){
-+	unsigned int i;
-+	foxbone_write(add, *data);
-+	unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
-+	for(i = 1; i < length; i++){	
-+		*R_PORT_G_DATA = port_g_data_shadow = def_val | data[i]<<8;
-+		*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+	};
-+};
-+
-+void foxbone_bulk_read(unsigned int *data, unsigned int length, unsigned int add){
-+	//printk("Get data from %d %d\n", add, length);
-+	unsigned int i;
-+	for(i = 0; i < length; i++){	
-+		if(i == 0){
-+			data[i] = foxbone_read(add);
-+		} else {
-+			data[i] = foxbone_read_next();
-+		};
-+	};
-+	
-+};
-+
-+void foxbone_initialise_bus(void){
-+	memset(foxint_callbacks, 0, sizeof(FOXINT_CALLBACK)*32);
-+
-+	// clear all address/data/control bits
-+	*R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES; 
-+	foxbone_reset(0);
-+	int i;
-+	for(i = 0; i < 32000; i++){
-+		i++;
-+		i--;
-+	};
-+	foxbone_reset(1);
-+	
-+	foxbone_bus_out();
-+	
-+	FOXBONE_release = foxbone_read(0x04);
-+	FOXBONE_application1 = foxbone_read(0x05);
-+	FOXBONE_application2 = foxbone_read(0x06);
-+	FOXBONE_application3 = foxbone_read(0x07);
-+	printk("foxbone : release = 0x%04x\n", FOXBONE_release);
-+	printk("foxbone : application word 1 = 0x%04x\n", FOXBONE_application1);
-+	printk("foxbone : application word 2 = 0x%04x\n", FOXBONE_application2);	
-+	printk("foxbone : application word 3 = 0x%04x\n", FOXBONE_application3);
-+
-+	
-+};
-+
-+
-+static ssize_t foxbone_userspace_write(struct file * file, const char * buffer, size_t count, loff_t *offset){	
-+	if(count > (64 * 1024)){
-+		printk("foxbone: trying to bulk write too much data\n");
-+		return 1;
-+	};
-+	unsigned int *bulk_data = (unsigned int) kmalloc(count, GFP_KERNEL);
-+	
-+	copy_from_user((char*) bulk_data, buffer, count);
-+	
-+	foxbone_bulk_write(&bulk_data[2], bulk_data[1], bulk_data[0]);
-+	
-+	kfree(bulk_data);	
-+	return 0;
-+};
-+
-+
-+static ssize_t foxbone_userspace_read(struct file *file, char *buffer, size_t count, loff_t *offset){
-+	if(count > (64 * 1024)){
-+		printk("foxbone: trying to bulk read too much data\n");
-+		return 0;
-+	};
-+	
-+	// find out which register we want to read
-+	unsigned int bulk_data_info[2];
-+	copy_from_user((char*) bulk_data_info, buffer, 8);
-+		
-+	// read the data
-+	unsigned int *bulk_data = (unsigned int)kmalloc(count, GFP_KERNEL);
-+		
-+	foxbone_bulk_read(&bulk_data[0], bulk_data_info[1], bulk_data_info[0]);
-+	
-+	copy_to_user((char*)buffer, (char*)bulk_data, count);
-+	
-+	kfree(bulk_data);
-+	
-+	return count / 4;
-+};
-+
-+// the app has send us some control data
-+static int foxbone_userspace_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	int retval = 0;
-+	FOXBONE_WRITE fb_write;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_INIT_BUS:
-+			foxbone_initialise_bus();
-+			break;
-+			
-+		case IOCTL_FOXBONE_WRITE_REG:
-+			copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
-+			foxbone_write(fb_write.reg, fb_write.data);
-+			break;
-+		
-+		case IOCTL_FOXBONE_READ_REG:
-+			retval = foxbone_read(arg);
-+			break;
-+		
-+		case IOCTL_FOXBONE_WRITE_NEXT:
-+			copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
-+			foxbone_write_next(fb_write.data);
-+			break;
-+		
-+		case IOCTL_FOXBONE_READ_NEXT:
-+			retval = foxbone_read_next();
-+			break;
-+
-+		case IOCTL_FOXBONE_INTERRUPTS:
-+			foxbone_allow_int = arg;
-+			break;
-+				
-+		default:
-+			printk("foxbone_userspace : unknown ioctl\n");
-+			break;		
-+	}
-+	return retval;
-+};
-+
-+
-+
-+static int foxbone_userspace_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("foxbone_userspace : trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxbone_userspace_is_open) {
-+		printk("foxbone_userspace : Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int foxbone_userspace_close(struct inode * inode, struct file * file){
-+
-+	foxbone_userspace_is_open = 0;
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxbone_userspace_fops = {
-+        ioctl:          foxbone_userspace_ioctl,
-+	write:		foxbone_userspace_write,
-+	read:		foxbone_userspace_read,
-+        open:           foxbone_userspace_open,
-+        release:        foxbone_userspace_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int foxbone_userspace_init(void){
-+	// flame the kprintk
-+	printk("foxbone_userspace : FOX-VHDL userspace access module\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxbone_userspace_fops)) {
-+		printk( "fpga_mod.ko : Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+	foxbone_userspace_is_open = 0;
-+	printk("foxbone_userspace : Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void foxbone_userspace_exit(void){
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+
-+static int __init foxbone_init(void){
-+	printk("foxbone : FOX-VHDL FOXBONE access module started\n");
-+	foxbone_initialise_bus();
-+	foxbone_allow_int = 1;
-+	foxbone_userspace_init();
-+	return 0;
-+}
-+
-+
-+static void __exit foxbone_exit(void){
-+	printk( "foxbone : Cleanup\n" );
-+	foxbone_userspace_exit();
-+}
-+
-+module_init (foxbone_init);
-+module_exit (foxbone_exit);
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,21 @@
-+// prototypes for foxbone compliant modules
-+
-+typedef void (*FOXINT_CALLBACK) (unsigned int);
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-+void foxbone_unregister_interrupt(unsigned char irq);
-+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback);
-+void foxbone_reset(unsigned char reset);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,155 @@
-+/*  
-+  foxbone_syscalls.c
-+  Linux Kernel syscalls for FoxBone on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/kernel.h>
-+#include <asm/uaccess.h>
-+#include <linux/foxbone_syscalls.h>
-+#include "foxbone.h"
-+
-+asmlinkage unsigned short int sys_foxboneread(unsigned short int reg){
-+	return foxbone_read(reg);
-+};
-+
-+asmlinkage void sys_foxbonewrite(unsigned short int reg, unsigned short int value){
-+	foxbone_write(reg, value);
-+};
-+
-+asmlinkage void sys_foxbonebulkread(unsigned short int reg, unsigned short int *value, unsigned int length){
-+	unsigned int i;
-+	unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
-+	*buffer = foxbone_read(reg);
-+	for(i = 1; i < length; i++){
-+		buffer[i] = foxbone_read_next();
-+	};
-+	copy_to_user(value, buffer, length * 2);
-+	kfree(buffer);	
-+	
-+};
-+
-+asmlinkage void sys_foxbonebulkwrite(unsigned short int reg, unsigned short int *value, unsigned int length){
-+	unsigned int i;
-+	unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
-+	copy_from_user(buffer, value, length * 2);
-+	foxbone_write(reg, *buffer);
-+	for(i = 1; i < length; i++){
-+		foxbone_write_next(buffer[i]);
-+	};
-+	kfree(buffer);	
-+};
-+
-+
-+/*
-+	interrupt handling from userspace
-+*/
-+
-+typedef struct _FOX_INT {
-+	unsigned char enabled;
-+	unsigned char count;
-+	unsigned char wakeup;
-+	wait_queue_head_t wait_queue;
-+} FOX_INT;
-+
-+
-+FOX_INT syscall_interrupts[32];
-+
-+
-+void foxbone_interrupt_callback(unsigned int interrupt){
-+	//printk("GOT INT %d\n", irq_no);
-+	if(syscall_interrupts[interrupt].enabled){
-+		syscall_interrupts[interrupt].count ++;
-+		if(syscall_interrupts[interrupt].wakeup){
-+			wake_up_interruptible(&syscall_interrupts[interrupt].wait_queue);
-+		};
-+	};	
-+};
-+
-+
-+asmlinkage void sys_foxboneintreg(unsigned long int interrupt, unsigned char state){
-+	if(interrupt > 31){
-+		interrupt = 31;
-+	};
-+	if(state){
-+		foxbone_register_interrupt(interrupt, foxbone_interrupt_callback);
-+		syscall_interrupts[interrupt].enabled = 1;
-+		syscall_interrupts[interrupt].count = 0;
-+		init_waitqueue_head(&syscall_interrupts[interrupt].wait_queue);
-+	} else {
-+		foxbone_unregister_interrupt(interrupt);
-+		syscall_interrupts[interrupt].enabled = 0;		
-+	};
-+};
-+
-+
-+asmlinkage unsigned int sys_foxboneintcheck( unsigned long int interrupt){
-+	unsigned int retval = 0xffff;
-+	if(interrupt > 31){
-+		interrupt = 31;
-+	};	
-+	if(syscall_interrupts[interrupt].enabled){
-+		retval = syscall_interrupts[interrupt].count;
-+		syscall_interrupts[interrupt].count = 0;
-+	};
-+	return retval;
-+};
-+
-+
-+asmlinkage unsigned int sys_foxboneintwait(unsigned long int interrupt, unsigned char timeout){
-+	unsigned int retval = 0xffff;
-+	if(interrupt > 31){
-+		interrupt = 31;
-+	};
-+	if(syscall_interrupts[interrupt].enabled){
-+		syscall_interrupts[interrupt].wakeup = 1;
-+		syscall_interrupts[interrupt].count = 0;
-+		interruptible_sleep_on_timeout(&syscall_interrupts[interrupt].wait_queue, timeout*HZ);
-+		if(syscall_interrupts[interrupt].count != 0){
-+			retval = syscall_interrupts[interrupt].count;
-+		};
-+		syscall_interrupts[interrupt].count = 0;
-+		syscall_interrupts[interrupt].wakeup = 0;
-+	};
-+	return retval;
-+};
-+
-+
-+asmlinkage void sys_foxbonereset(unsigned short int reg){
-+	foxbone_reset(0);
-+	int i;
-+	for(i = 0; i < 32000; i++){
-+		i++;
-+		i--;
-+	};
-+	foxbone_reset(1);
-+};
-+
-+static int __init foxbone_syscall_init(void){
-+	memset(syscall_interrupts, 0, sizeof(FOX_INT) * 32);
-+	return 0;
-+}
-+
-+
-+static void __exit foxbone_syscall_exit(void){
-+}
-+
-+module_init (foxbone_syscall_init);
-+module_exit (foxbone_syscall_exit);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,17 @@
-+// These are the ioctls for accessing /dev/foxbone
-+
-+#define IOCTL_FOXBONE_INIT_BUS	   	0x3341
-+#define IOCTL_FOXBONE_WRITE_REG   	0x3342
-+#define IOCTL_FOXBONE_READ_REG   	0x3343
-+#define IOCTL_FOXBONE_WRITE_NEXT   	0x3344
-+#define IOCTL_FOXBONE_READ_NEXT   	0x3345
-+#define IOCTL_FOXBONE_INTERRUPTS   	0x3346
-+
-+// the data structure used to write a register
-+typedef struct _FOXBONE_WRITE {
-+	unsigned int reg;
-+	unsigned int data;
-+} FOXBONE_WRITE; 
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_FOXBONE)          += foxbone.o
-+obj-$(CONFIG_FOXBONE)          += foxbone_syscalls.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,170 @@
-+/*  
-+  fox_event.c
-+  Linux Kernel Driver for FoxBone EventCounter on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"event"
-+#define DEV_MAJOR 			193
-+
-+#include "foxbone.h"
-+
-+unsigned char foxevent_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_EVENT_SET_ALARM	0x4745
-+#define IOCTL_FOXBONE_EVENT_GET_COUNT	0x4746
-+#define IOCTL_FOXBONE_EVENT_GET_ALARM	0x4747
-+#define IOCTL_FOXBONE_EVENT_RESET_ALARM	0x4748
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	unsigned int current_io = 0;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_EVENT_SET_ALARM:
-+			foxbone_write(0x0040, 0);
-+			foxbone_write(0x0041, arg);
-+			foxbone_write(0x0040, 3);
-+			break;
-+	
-+		case IOCTL_FOXBONE_EVENT_GET_COUNT:
-+			retval = foxbone_read(0x0042);
-+			break;
-+		
-+		case IOCTL_FOXBONE_EVENT_GET_ALARM:
-+			retval = foxbone_read(0x0043);
-+			break;
-+			
-+		case IOCTL_FOXBONE_EVENT_RESET_ALARM:
-+			current_io = foxbone_read(0x0040);
-+			current_io &= ~(1<<1);
-+			foxbone_write(0x0040, 0);
-+			current_io |= (1<<1);
-+			foxbone_write(0x0040, 0);
-+			break;
-+			
-+		default:
-+			printk("fox_event: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_event: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxevent_is_open) {
-+		printk("fox_event: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	printk("fox_event: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxevent_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("fox_event: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxevent_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_event: FOX-VHDL FPGA io module\n");
-+	//printk("fox_event: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_event: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxevent_module_fops)) {
-+		printk( "fox_event: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxevent_is_open = 0;
-+	printk("fox_event: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_event: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_EVENT)          += fox_event.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_FOX_FPGA)          += dpa3palg.oo dpalg.oo dpjtag2.oo dpjtag.oo dpuncomp.oo dpuser.oo fpga_module.oo
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOX_FPGA)          += dpa3palg.o dpalg.o dpjtag2.o dpjtag.o dpuncomp.o dpuser.o fpga_module.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,164 @@
-+/*  
-+  fox_io.c
-+  Linux Kernel Driver for FoxBone I/O on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"foxio"
-+#define DEV_MAJOR 			190
-+
-+#include "foxbone.h"
-+
-+unsigned char foxio_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_IO_SET		0x4545
-+#define IOCTL_FOXBONE_IO_CLR		0x4546
-+#define IOCTL_FOXBONE_IO_GET		0x4547
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	unsigned int current_io = 0;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_IO_SET:
-+			current_io = foxbone_read(0x0014);
-+			current_io |= (1<<arg);
-+			foxbone_write(0x0014, current_io);
-+			break;
-+	
-+		case IOCTL_FOXBONE_IO_CLR:
-+			current_io = foxbone_read(0x0014);
-+			current_io &= ~(1<<arg);
-+			foxbone_write(0x0014, current_io);
-+			break;
-+		
-+		case IOCTL_FOXBONE_IO_GET:
-+			retval = foxbone_read(0x0015);
-+			break;
-+		
-+			
-+		default:
-+			printk("fox_io: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_io: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxio_is_open) {
-+		printk("fox_io: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	printk("fox_io: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxio_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("fox_io: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxio_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_io: FOX-VHDL FPGA io module\n");
-+	//printk("fox_io: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_io: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxio_module_fops)) {
-+		printk( "fox_io: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxio_is_open = 0;
-+	printk("fox_io: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_io: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_IO)          += fox_io.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,154 @@
-+/*  
-+  fox_loopback.c
-+  Linux Kernel Driver for FoxBone Loopback Register on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"loopback"
-+#define DEV_MAJOR 			192
-+
-+#include "foxbone.h"
-+
-+unsigned char foxloopback_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_LOOPBACK_SET		0x4045
-+#define IOCTL_FOXBONE_LOOPBACK_GET		0x4046
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	unsigned int current_io = 0;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_LOOPBACK_SET:
-+			foxbone_write(0x0013, arg);
-+			break;
-+		
-+		case IOCTL_FOXBONE_LOOPBACK_GET:
-+			retval = foxbone_read(0x0013);
-+			break;		
-+			
-+		default:
-+			printk("fox_loopback: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_loopback: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxloopback_is_open) {
-+		printk("fox_loopback: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	printk("fox_loopback: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxloopback_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("fox_loopback: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxloopback_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_loopback: FOX-VHDL FPGA io module\n");
-+	//printk("fox_loopback: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_loopback: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxloopback_module_fops)) {
-+		printk( "fox_loopback: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxloopback_is_open = 0;
-+	printk("fox_loopback: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_loopback: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_LOOPBACK)          += fox_loopback.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,172 @@
-+/*  
-+  fox_multiply.c
-+  Linux Kernel Driver for FoxBone 32x32 fast multiplier on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"multiply"
-+#define DEV_MAJOR 			194
-+
-+#include "foxbone.h"
-+
-+unsigned char foxmultiply_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_MUTIPLY		0x4945
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	long data[3], i;
-+	int retval = 0;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_MUTIPLY:
-+			copy_from_user((char*)&data[0], (char*)arg, sizeof(long)  * 3);
-+			data[2] = jiffies;
-+			printk("%ld, %ld\n", data[0], data[1]);
-+			//for(i = 0; i < 1024*1024; i++){
-+				foxbone_write(0x0021, (data[0]>>16)&0xffff);
-+				foxbone_write(0x0020, data[0]&0xffff);
-+				foxbone_write(0x0023, (data[1]>>16)&0xffff);
-+				foxbone_write(0x0022, data[1]&0xffff);
-+				data[0] = foxbone_read(0x0025);
-+				data[0] = (data[0] << 16) + foxbone_read(0x0024);
-+				data[1] = foxbone_read(0x0027);
-+				data[1] = (data[1] << 16) + foxbone_read(0x0026);
-+				/*printk("%4x\n", foxbone_read(0x0020));
-+				printk("%4x\n", foxbone_read(0x0021));
-+				printk("%4x\n", foxbone_read(0x0022));
-+				printk("%4x\n", foxbone_read(0x0023));
-+				
-+				printk("%4x\n", foxbone_read(0x0024));
-+				printk("%4x\n", foxbone_read(0x0025));
-+				printk("%4x\n", foxbone_read(0x0026));
-+				printk("%4x\n", foxbone_read(0x0027));
-+				*/		
-+			//};
-+			data[2] = jiffies - data[2];
-+			copy_to_user((char*)arg, (char*)&data[0], sizeof(unsigned long) * 3);
-+			break;
-+	
-+		default:
-+			printk("fox_multiply: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_multiply: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxmultiply_is_open) {
-+		printk("fox_multiply: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	//printk("fox_multiply: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	// unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxmultiply_is_open = 0;
-+	
-+	
-+	// more flaming
-+	//printk("fox_multiply: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxmultiply_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_multiply: FOX-VHDL FPGA multiplier module\n");
-+	//printk("fox_multiply: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_multiply: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxmultiply_module_fops)) {
-+		printk( "fox_multiply: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxmultiply_is_open = 0;
-+	printk("fox_multiply: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_multiply: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_MULTIPLY)          += fox_multiply.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,180 @@
-+/*  
-+  fox_pwm.c
-+  Linux Kernel Driver for FoxBone 16 channel PWM generator on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"pwm"
-+#define DEV_MAJOR 			15
-+
-+#include "foxbone.h"
-+
-+unsigned char foxpwm_is_open = 0;
-+
-+
-+#define IOCTL_PWM_ENABLE	0x2310
-+#define IOCTL_PWM_DISABLE	0x2311
-+#define IOCTL_PWM_CHANNEL_BASE	0x2320
-+#define IOCTL_PWM_CHANNEL0	0x2320
-+#define IOCTL_PWM_CHANNEL1	0x2321
-+#define IOCTL_PWM_CHANNEL2	0x2322
-+#define IOCTL_PWM_CHANNEL3	0x2323
-+#define IOCTL_PWM_CHANNEL4	0x2324
-+#define IOCTL_PWM_CHANNEL5	0x2325
-+#define IOCTL_PWM_CHANNEL6	0x2326
-+#define IOCTL_PWM_CHANNEL7	0x2327
-+#define IOCTL_PWM_CHANNEL8	0x2328
-+#define IOCTL_PWM_CHANNEL9	0x2329
-+#define IOCTL_PWM_CHANNELA	0x232a
-+#define IOCTL_PWM_CHANNELB	0x232b
-+#define IOCTL_PWM_CHANNELC	0x232c
-+#define IOCTL_PWM_CHANNELD	0x232d
-+#define IOCTL_PWM_CHANNELE	0x232e
-+#define IOCTL_PWM_CHANNELF	0x232f
-+
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	unsigned int current_pwm;
-+	if((cmd >= IOCTL_PWM_CHANNEL0) && (cmd <= IOCTL_PWM_CHANNELF)){
-+		foxbone_write(0x0050 + (cmd - IOCTL_PWM_CHANNEL_BASE), arg);
-+	} else {
-+		switch (cmd) {
-+			case IOCTL_PWM_ENABLE:
-+				current_pwm = foxbone_read(0x0060);
-+				current_pwm |= (1<<arg);
-+				foxbone_write(0x0060, current_pwm);
-+				break;
-+			
-+			case IOCTL_PWM_DISABLE:
-+				current_pwm = foxbone_read(0x0060);
-+				current_pwm &= ~(1<<arg);
-+				foxbone_write(0x0060, current_pwm);
-+				break;
-+			
-+			default:
-+				printk("fox_pwm: unknown ioctl\n");
-+				break;			
-+		}
-+	};
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_pwm: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxpwm_is_open) {
-+		printk("fox_pwm: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	printk("fox_pwm: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxpwm_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("fox_pwm: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxpwm_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_pwm: FOX-VHDL FPGA PWM module\n");
-+	//printk("fox_pwm: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_pwm: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxpwm_module_fops)) {
-+		printk( "fox_pwm: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxpwm_is_open = 0;
-+	printk("fox_pwm: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_pwm: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_PWM)          += fox_pwm.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,168 @@
-+/*  
-+  fox_timebase.c
-+  Linux Kernel Driver for FoxBone TimeBase on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"timebase"
-+#define DEV_MAJOR 			191
-+
-+#include "foxbone.h"
-+
-+unsigned char foxtimebase_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_TIMEBASE_ENABLE		0x4645
-+#define IOCTL_FOXBONE_TIMEBASE_DISABLE		0x4646
-+#define IOCTL_FOXBONE_TIMEBASE_SETLO		0x4647
-+#define IOCTL_FOXBONE_TIMEBASE_SETHI		0x4648
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	switch (cmd) {
-+		case IOCTL_FOXBONE_TIMEBASE_ENABLE:
-+			foxbone_write(0x0100, 0x01);
-+			break;
-+			
-+		case IOCTL_FOXBONE_TIMEBASE_DISABLE:
-+			foxbone_write(0x0100, 0x00);
-+			break;
-+	
-+		case IOCTL_FOXBONE_TIMEBASE_SETLO:
-+			foxbone_write(0x0100, 0x00);
-+			foxbone_write(0x0102, arg);
-+			foxbone_write(0x0100, 0x01);
-+			break;
-+			
-+		case IOCTL_FOXBONE_TIMEBASE_SETHI:
-+			foxbone_write(0x0100, 0x00);
-+			foxbone_write(0x0103, arg);
-+			foxbone_write(0x0100, 0x01);
-+			break;
-+			
-+		default:
-+			printk("fox_timebase: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("fox_timebase: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(foxtimebase_is_open) {
-+		printk("fox_timebase: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	
-+	// more flaming
-+	printk("fox_timebase: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	foxtimebase_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("fox_timebase: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxtimebase_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("fox_timebase: FOX-VHDL FPGA timebase module\n");
-+	//printk("fox_timebase: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("fox_timebase: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxtimebase_module_fops)) {
-+		printk( "fox_timebase: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	foxtimebase_is_open = 0;
-+	printk("fox_timebase: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "fox_timebase: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_TIMEBASE)          += fox_timebase.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,661 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/uaccess.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+
-+#include "foxbone.h"
-+
-+
-+#if 0
-+#define DBG(x) x
-+#else
-+#define DBG(x) 
-+#endif
-+
-+
-+
-+// software delay
-+void FOXVHDL_delay(int ms) {
-+	int i,a;
-+	int delayvar=10;
-+	
-+	for (a=0;a<ms;a++) {
-+		for (i=0;i<35;i++) {
-+			delayvar*=2;        
-+			delayvar/=2;
-+		} 
-+	}
-+}  
-+
-+
-+
-+/*
-+||
-+||	FOXVHDL CTL functions
-+||
-+*/
-+
-+
-+static unsigned char FOXVHDL_current_bank = 0xff;
-+
-+static unsigned char blitting = 1;
-+
-+static unsigned char refreshrate = 6;
-+
-+
-+
-+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
-+	// translate the three color passed in a single 16 bit color word
-+	unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
-+	return result;
-+}
-+
-+
-+
-+
-+// wait until the videostate pin has the wanted value
-+void FOXVHDL_wait_videostate(unsigned char wait_state){
-+/*	unsigned char vid_state = 0;
-+	unsigned int max_error = 0xffff;
-+	//printk("Start wait\n");
-+	do {
-+		vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
-+		max_error--;
-+	} while((vid_state != wait_state)&&(max_error > 10));
-+	*/
-+	DBG(if(max_error < 11){printk("Stop wait\n");};)
-+};
-+	
-+
-+// choose the bank that we want to display
-+// OG5 == 0 --> Bank0
-+// OG5 == 1 --> Bank1
-+void FOXVHDL_set_bank(unsigned char bank){
-+	DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
-+	if(FOXVHDL_current_bank == bank){
-+		return;
-+	};
-+	
-+	DBG(printk("FOXVHDL_set_bank\n");)
-+	
-+	FOXVHDL_current_bank = bank;
-+	foxbone_write(0x7001, FOXVHDL_current_bank);	
-+	
-+	
-+};
-+
-+
-+// blit the bank
-+void FOXVHDL_swap_bank(void){
-+	FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));	
-+};
-+
-+
-+// initialise the I/O pins
-+void FOXVHDL_init(void){
-+	DBG(printk("FOXVHDL_init\n");)
-+	
-+	FOXVHDL_current_bank = 0;
-+	
-+	FOXVHDL_set_bank(1);
-+	
-+};
-+
-+/*
-+||
-+||	FOXVHDL IMAGE FUNCTIONS
-+||
-+*/
-+#define Fox_line_WriteData        (1<<2)
-+
-+void FOXVHDL_blit(unsigned short int *image){
-+	unsigned long i;
-+	unsigned int fb_ctl_reg;
-+	
-+	if(blitting){
-+		// reset the address pointer
-+		fb_ctl_reg = foxbone_read(0x7001);
-+		fb_ctl_reg |= (1<<4);
-+		foxbone_write(0x7001, fb_ctl_reg);
-+		fb_ctl_reg &= ~(1<<4);
-+		foxbone_write(0x7001, fb_ctl_reg);
-+				 
-+		foxbone_write(0x7000, image[0]);
-+		genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+		*R_GEN_CONFIG = genconfig_shadow;
-+		genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+		*R_GEN_CONFIG = genconfig_shadow;	
-+
-+		for(i = 1; i < 640 * 400; i++){
-+
-+			*R_PORT_G_DATA = port_g_data_shadow = 
-+						(port_g_data_shadow & 0xff0000ff) | image[i]<<8;
-+			*R_PORT_G_DATA = port_g_data_shadow |= Fox_line_WriteData;
-+			*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+		};
-+		for(i = 0; i <6144; i++){
-+			foxbone_write_next(0);
-+		};
-+		FOXVHDL_swap_bank();
-+	};
-+};
-+
-+
-+
-+
-+
-+
-+/*
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||
-+||										FRAMEBUFFER CODE
-+||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+
-+*/
-+
-+
-+
-+
-+#define VIDEOMEMSIZE	(640 * 400 * 2)	//512K
-+
-+static void *videomemory;
-+static u_long videomemorysize = VIDEOMEMSIZE;
-+
-+static unsigned char fb_started = 0;
-+
-+static struct fb_var_screeninfo foxfb_default __initdata = {
-+	.xres =		640,
-+	.yres =		400,
-+	.xres_virtual =	640,
-+	.yres_virtual =	400,
-+	.bits_per_pixel = 16,
-+	.red =		{ 0, 5, 0 },
-+	.green =	{ 5, 6, 0 },
-+	.blue =		{ 11, 5, 0 },
-+	.activate =	FB_ACTIVATE_NOW,
-+	.height =	-1,
-+	.width =	-1,
-+	.vmode =	FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo foxfb_fix __initdata = {
-+	.id =		"FOX-VHDL FB",
-+	.type =		FB_TYPE_PACKED_PIXELS,
-+	.visual =	FB_VISUAL_TRUECOLOR,
-+	.xpanstep =	1,
-+	.ypanstep =	1,
-+	.ywrapstep =	1,
-+	.accel =	FB_ACCEL_NONE,
-+};
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_set_par(struct fb_info *info);
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
-+
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+static struct fb_ops foxfb_ops = {
-+	.fb_check_var	= foxfb_check_var,
-+	.fb_set_par		= foxfb_set_par,
-+	.fb_setcolreg	= foxfb_setcolreg,
-+
-+	.fb_pan_display	= foxfb_pan_display,
-+	.fb_fillrect	= foxfb_fillrect, //cfb_fillrect,
-+	.fb_copyarea	= foxfb_copyarea, //cfb_copyarea,
-+	.fb_imageblit	= foxfb_imageblit,//cfb_imageblit,
-+	.fb_mmap		= foxfb_mmap,
-+	.fb_ioctl 		= foxfb_ioctl,
-+};
-+
-+// this function is defined in fbmem.c
-+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+// this should be a free one
-+#define FOX_FBIOGET_SCREEN 	0x4642
-+#define FOX_FBBLIT		0x4643
-+#define FOX_FB_RATE 		0x4645
-+#define FOX_FB_TFT		0x4646
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
-+	void __user *argp = (void __user *)arg;
-+	unsigned int fb_ctl_reg;
-+	switch(cmd){
-+		// this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
-+		case FOX_FBIOGET_SCREEN:
-+			if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
-+				return 0;
-+			} else {
-+				return -1;
-+			};
-+		case FOX_FBBLIT:
-+			fb_ctl_reg = foxbone_read(0x7001);
-+			if(arg){
-+				printk("Enable FB\n");
-+				fb_ctl_reg &= ~(1<<1);
-+			} else {
-+				printk("Disable FB\n");
-+				fb_ctl_reg |= (1<<1);
-+			};		
-+			blitting = arg;
-+			foxbone_write(0x7001, fb_ctl_reg);
-+			break;
-+		case FOX_FB_RATE:
-+			if((arg > 9) || (arg < 1)){
-+				printk("fb0 : Illegal refreshrate\n");
-+				break;
-+			};
-+			refreshrate = arg;
-+			printk("fb0 : new refreshrate\n");
-+			break;
-+		case FOX_FB_TFT:
-+			fb_ctl_reg = foxbone_read(0x7001);
-+			if(arg){
-+				printk("Enable TFT\n");
-+				fb_ctl_reg |= (1<<3);
-+			} else {
-+				printk("Disable TFT\n");
-+				fb_ctl_reg &= ~(1<<3);
-+			};
-+			foxbone_write(0x7001, fb_ctl_reg);
-+			break;
-+		default:
-+			return fb_ioctl(inode, file, cmd, arg);		
-+	};
-+	return 0;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
-+	cfb_fillrect(info, rect);
-+};
-+
-+
-+// TODO add our own optimized code here
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
-+	cfb_copyarea(info, area);
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
-+	cfb_imageblit(info, image);
-+};
-+
-+
-+/*
-+ *  Internal routines
-+ */
-+
-+static u_long get_line_length(int xres_virtual, int bpp)
-+{
-+	u_long length;
-+
-+	length = xres_virtual * bpp;
-+	length = (length + 31) & ~31;
-+	length >>= 3;
-+	return (length);
-+}
-+
-+    /*
-+     *  Setting the video mode has been split into two parts.
-+     *  First part, xxxfb_check_var, must not write anything
-+     *  to hardware, it should only verify and adjust var.
-+     *  This means it doesn't alter par but it does use hardware
-+     *  data from it to check this var. 
-+     */
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var,
-+			 struct fb_info *info)
-+{
-+	u_long line_length;
-+
-+	if (var->vmode & FB_VMODE_CONUPDATE) {
-+		var->vmode |= FB_VMODE_YWRAP;
-+		var->xoffset = info->var.xoffset;
-+		var->yoffset = info->var.yoffset;
-+	}
-+
-+	var->xres = 640;
-+	var->yres = 400;
-+	
-+	var->bits_per_pixel = 16;
-+	
-+	if (var->xres_virtual < var->xoffset + var->xres)
-+		var->xres_virtual = var->xoffset + var->xres;
-+	if (var->yres_virtual < var->yoffset + var->yres)
-+		var->yres_virtual = var->yoffset + var->yres;
-+
-+	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-+	if (line_length * var->yres_virtual > videomemorysize)
-+		return -ENOMEM;
-+
-+	var->red.offset = 0;
-+	var->red.length = 5;
-+	var->green.offset = 5;
-+	var->green.length = 6;
-+	var->blue.offset = 11;
-+	var->blue.length = 5;
-+	var->transp.offset = 0;
-+	var->transp.length = 0;
-+	var->red.msb_right = 0;
-+	var->green.msb_right = 0;
-+	var->blue.msb_right = 0;
-+	var->transp.msb_right = 0;
-+
-+	return 0;
-+}
-+
-+
-+
-+/* This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the 
-+ * change in par. For this driver it doesn't do much. 
-+ */
-+static int foxfb_set_par(struct fb_info *info){
-+	info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
-+	return 0;
-+}
-+
-+/*
-+ *  Set a single color register. The values supplied are already
-+ *  rounded down to the hardware's capabilities (according to the
-+ *  entries in the var structure). Return != 0 for invalid regno.
-+ */
-+
-+
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
-+	if (regno >= 256)	/* no. of hw registers */
-+		return 1;
-+
-+	/* grayscale works only partially under directcolor */
-+	if (info->var.grayscale) {
-+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
-+		red = green = blue =
-+		    (red * 77 + green * 151 + blue * 28) >> 8;
-+	}
-+
-+	/* Directcolor:
-+	 *   var->{color}.offset contains start of bitfield
-+	 *   var->{color}.length contains length of bitfield
-+	 *   {hardwarespecific} contains width of RAMDAC
-+	 *   cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
-+	 *   RAMDAC[X] is programmed to (red, green, blue)
-+	 * 
-+	 * Pseudocolor:
-+	 *    uses offset = 0 && length = RAMDAC register width.
-+	 *    var->{color}.offset is 0
-+	 *    var->{color}.length contains widht of DAC
-+	 *    cmap is not used
-+	 *    RAMDAC[X] is programmed to (red, green, blue)
-+	 * Truecolor:
-+	 *    does not use DAC. Usually 3 are present.
-+	 *    var->{color}.offset contains start of bitfield
-+	 *    var->{color}.length contains length of bitfield
-+	 *    cmap is programmed to (red << red.offset) | (green << green.offset) |
-+	 *                      (blue << blue.offset) | (transp << transp.offset)
-+	 *    RAMDAC does not exist
-+	 */
-+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
-+	switch (info->fix.visual) {
-+	case FB_VISUAL_TRUECOLOR:
-+	case FB_VISUAL_PSEUDOCOLOR:
-+		red = CNVT_TOHW(red, info->var.red.length);
-+		green = CNVT_TOHW(green, info->var.green.length);
-+		blue = CNVT_TOHW(blue, info->var.blue.length);
-+		transp = CNVT_TOHW(transp, info->var.transp.length);
-+		break;
-+	case FB_VISUAL_DIRECTCOLOR:
-+		red = CNVT_TOHW(red, 8);	/* expect 8 bit DAC */
-+		green = CNVT_TOHW(green, 8);
-+		blue = CNVT_TOHW(blue, 8);
-+		/* hey, there is bug in transp handling... */
-+		transp = CNVT_TOHW(transp, 8);
-+		break;
-+	}
-+#undef CNVT_TOHW
-+	/* Truecolor has hardware independent palette */
-+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-+		u32 v;
-+
-+		if (regno >= 16)
-+			return 1;
-+
-+		v = (red << info->var.red.offset) |
-+		    (green << info->var.green.offset) |
-+		    (blue << info->var.blue.offset) |
-+		    (transp << info->var.transp.offset);
-+		switch (info->var.bits_per_pixel) {
-+		case 8:
-+			break;
-+		case 16:
-+			((u32 *) (info->pseudo_palette))[regno] = v;
-+			break;
-+		case 24:
-+		case 32:
-+			((u32 *) (info->pseudo_palette))[regno] = v;
-+			break;
-+		}
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+    /*
-+     *  Pan or Wrap the Display
-+     *
-+     *  This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+     */
-+
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
-+	if (var->vmode & FB_VMODE_YWRAP) {
-+		if (var->yoffset < 0
-+		    || var->yoffset >= info->var.yres_virtual
-+		    || var->xoffset)
-+			return -EINVAL;
-+	} else {
-+		if (var->xoffset + var->xres > info->var.xres_virtual ||
-+		    var->yoffset + var->yres > info->var.yres_virtual)
-+			return -EINVAL;
-+	}
-+	info->var.xoffset = var->xoffset;
-+	info->var.yoffset = var->yoffset;
-+	if (var->vmode & FB_VMODE_YWRAP)
-+		info->var.vmode |= FB_VMODE_YWRAP;
-+	else
-+		info->var.vmode &= ~FB_VMODE_YWRAP;
-+	return 0;
-+}
-+
-+/*
-+ *  Most drivers don't need their own mmap function 
-+ */
-+
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
-+        unsigned long page, pos;
-+        unsigned long start = vma->vm_start;
-+        unsigned long size  = vma->vm_end-vma->vm_start;
-+        printk("mmap : %ld %ld\n", size, info->fix.smem_len);
-+	//if (size > info->fix.smem_len){
-+        //       return -EINVAL;
-+	//}
-+        printk("MMAP2\n");
-+	pos = (unsigned long) info->screen_base;
-+        while (size > 0) {
-+                page = page_to_pfn(vmalloc_to_page((void *)pos));
-+    	        if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-+        	        return -EAGAIN;
-+	        start += PAGE_SIZE;
-+	        pos += PAGE_SIZE;
-+	        if (size > PAGE_SIZE)
-+	                size -= PAGE_SIZE;
-+	        else
-+	                size = 0;
-+        }
-+        return 0;
-+}
-+
-+
-+
-+
-+
-+// our timer
-+struct timer_list foxfb_timer;
-+
-+
-+// the prototype for the callback
-+static void foxfb_timer_callback(unsigned long ptr);
-+
-+
-+// setup the mmc timer
-+static void foxfb_timer_setup(void){
-+	init_timer(&foxfb_timer);
-+	foxfb_timer.function = foxfb_timer_callback;
-+	foxfb_timer.data = 0;
-+	foxfb_timer.expires = jiffies + ( HZ / refreshrate);
-+	add_timer(&foxfb_timer);	
-+};
-+
-+
-+// the timer callback function that detects if the card status has changed
-+static void foxfb_timer_callback(unsigned long ptr){
-+	del_timer(&foxfb_timer);
-+	FOXVHDL_blit(videomemory);
-+	foxfb_timer_setup();
-+};
-+
-+
-+static void foxfb_platform_release(struct device *device){
-+	// This is called when the reference count goes to zero.
-+}
-+
-+
-+static int __init foxfb_probe(struct platform_device *dev){
-+	struct fb_info *info;
-+	int retval = -ENOMEM;
-+
-+	if (!(videomemory = vmalloc(videomemorysize)))
-+		return retval;
-+		
-+	memset(videomemory, 0, videomemorysize);
-+
-+	info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
-+	if (!info)
-+		goto err;
-+
-+	info->screen_base = (char*)videomemory;
-+	info->fbops = &foxfb_ops;
-+ 	info->fix.smem_len = videomemorysize;
-+	retval = fb_find_mode(&info->var, info, NULL,
-+			      NULL, 0, NULL, 8);
-+
-+	if (!retval || (retval == 4))
-+		info->var = foxfb_default;
-+
-+	info->fix = foxfb_fix;
-+	info->pseudo_palette = info->par;
-+	info->par = NULL;
-+	info->flags = FBINFO_FLAG_DEFAULT;
-+
-+	retval = fb_alloc_cmap(&info->cmap, 256, 0);
-+	if (retval < 0)
-+		goto err1;
-+
-+	retval = register_framebuffer(info);
-+	if (retval < 0)
-+		goto err2;
-+	platform_set_drvdata(dev, info);
-+
-+	printk(KERN_INFO
-+	       "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
-+	       info->node, videomemorysize >> 10);
-+	
-+	
-+	//FOXVHDL_blit(videomemory);  
-+	foxfb_timer_setup();
-+	return 0;
-+err2:
-+	fb_dealloc_cmap(&info->cmap);
-+err1:
-+	framebuffer_release(info);
-+err:
-+	vfree(videomemory);
-+	return retval;
-+}
-+
-+static int foxfb_remove(struct platform_device *dev)
-+{
-+	struct fb_info *info = platform_get_drvdata(dev);
-+
-+	if (info) {
-+		unregister_framebuffer(info);
-+		vfree(videomemory);
-+		framebuffer_release(info);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver foxfb_driver = {
-+	.probe	= foxfb_probe,
-+	.remove = foxfb_remove,
-+	.driver = {
-+		.name	= "foxfb",
-+	},
-+};
-+
-+static struct platform_device foxfb_device = {
-+	.name	= "foxfb",
-+	.id	= 0,
-+	.dev	= {
-+		.release = foxfb_platform_release,
-+	}
-+};
-+
-+static int __init foxfb_init(void)
-+{
-+	int ret = 0;
-+	refreshrate = 8;
-+	printk(KERN_INFO "fb: Initialising framebuffer\n");
-+	
-+	FOXVHDL_init();
-+
-+	ret = platform_driver_register(&foxfb_driver);
-+
-+	if (!ret) {
-+		ret = platform_device_register(&foxfb_device);
-+		if (ret)
-+			platform_driver_unregister(&foxfb_driver);
-+	}	
-+	fb_started = 1;
-+	return ret;
-+}
-+
-+static void __exit foxfb_exit(void)
-+{
-+	platform_device_unregister(&foxfb_device);
-+	platform_driver_unregister(&foxfb_driver);
-+}
-+
-+module_exit(foxfb_exit);
-+module_init(foxfb_init);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
-+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,20 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-+
-+void foxbone_lock(void);
-+
-+void foxbone_unlock(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,691 @@
-+/*  
-+  foxvhdlfb.c
-+  Linux Kernel Driver for FoxBone FrameBuffer on FOX VHDL Board 
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/uaccess.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+
-+#include "foxbone.h"
-+
-+
-+#if 0
-+#define DBG(x) x
-+#else
-+#define DBG(x) 
-+#endif
-+
-+
-+/*
-+||
-+||	FOXVHDL CTL functions
-+||
-+*/
-+
-+
-+static unsigned char FOXVHDL_current_bank = 0xff;
-+
-+static unsigned char blitting = 1;
-+
-+static unsigned char refreshrate = 6;
-+
-+
-+
-+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
-+	// translate the three color passed in a single 16 bit color word
-+	unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
-+	return result;
-+}
-+
-+
-+
-+
-+// wait until the videostate pin has the wanted value
-+void FOXVHDL_wait_videostate(unsigned char wait_state){
-+/*	unsigned char vid_state = 0;
-+	unsigned int max_error = 0xffff;
-+	//printk("Start wait\n");
-+	do {
-+		vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
-+		max_error--;
-+	} while((vid_state != wait_state)&&(max_error > 10));
-+	*/
-+	DBG(if(max_error < 11){printk("Stop wait\n");};)
-+};
-+	
-+
-+// choose the bank that we want to display
-+// OG5 == 0 --> Bank0
-+// OG5 == 1 --> Bank1
-+void FOXVHDL_set_bank(unsigned char bank){
-+	DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
-+	if(FOXVHDL_current_bank == bank){
-+		return;
-+	};
-+	
-+	DBG(printk("FOXVHDL_set_bank\n");)
-+	
-+	FOXVHDL_current_bank = bank;
-+	foxbone_write(0x7001, FOXVHDL_current_bank);	
-+	
-+	
-+};
-+
-+
-+// blit the bank
-+void FOXVHDL_swap_bank(void){
-+	FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));	
-+};
-+
-+
-+// initialise the I/O pins
-+void FOXVHDL_init(void){
-+	DBG(printk("FOXVHDL_init\n");)
-+	
-+	FOXVHDL_current_bank = 0;
-+	
-+	FOXVHDL_set_bank(1);
-+	
-+};
-+
-+/*
-+||
-+||	FOXVHDL IMAGE FUNCTIONS
-+||
-+*/
-+#define Fox_line_WriteData        (1<<2)
-+
-+// for performance reasons, we do not use the foxbone access functions here
-+// we rather use an optimised algorithm. blitting now only takes about 6 ms. 
-+// meaning we can that effectivley achieve 17 frame. however the refresh rate by
-+// default is 4 fps
-+
-+#if 0
-+#define DBG_TIMER(x) x
-+#else
-+#define DBG_TIMER(x) 
-+#endif
-+
-+#if 0
-+#define DOUBLE_DATA_RATE
-+#endif
-+
-+void FOXVHDL_blit(unsigned short int *image){
-+	unsigned long i;
-+	unsigned int fb_ctl_reg;
-+	
-+	if(blitting){
-+		foxbone_lock();
-+		DBG_TIMER(unsigned long j = jiffies;)
-+		// reset the address pointer
-+		fb_ctl_reg = foxbone_read(0x7001);
-+		fb_ctl_reg |= (1<<4);
-+		foxbone_write(0x7001, fb_ctl_reg);
-+		fb_ctl_reg &= ~(1<<4);
-+		foxbone_write(0x7001, fb_ctl_reg);
-+				 
-+		foxbone_write(0x7000, image[0]);
-+		genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+		*R_GEN_CONFIG = genconfig_shadow;
-+		genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+		*R_GEN_CONFIG = genconfig_shadow;	
-+		
-+		*R_PORT_G_DATA = port_g_data_shadow = (port_g_data_shadow & 0xff0000ff);
-+		
-+
-+#ifdef DOUBLE_DATA_RATE
-+	
-+		unsigned long def_val = (port_g_data_shadow & 0xff0000ff);
-+		for(i = 1; i < 640 * 400; i+=2){
-+			*R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8 | Fox_line_WriteData;
-+			*R_PORT_G_DATA = port_g_data_shadow = def_val | image[i+1]<<8;
-+		};
-+		*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+		
-+#else	
-+	
-+		unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
-+		for(i = 1; i < 640 * 400; i++){	
-+			*R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8;
-+			*R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+		};
-+#endif			
-+		foxbone_unlock();
-+		FOXVHDL_swap_bank();
-+		DBG_TIMER(printk("%ld\n", jiffies - j);)
-+		
-+	};
-+};
-+
-+
-+
-+
-+
-+
-+/*
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||
-+||										FRAMEBUFFER CODE
-+||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+
-+*/
-+
-+
-+
-+
-+#define VIDEOMEMSIZE	(640 * 400 * 2)	//512K
-+
-+static void *videomemory;
-+static u_long videomemorysize = VIDEOMEMSIZE;
-+
-+static unsigned char fb_started = 0;
-+
-+static unsigned char fb_update = 0;
-+
-+static unsigned char fb_mmap_enable = 0;
-+
-+static struct fb_var_screeninfo foxfb_default __initdata = {
-+	.xres =		640,
-+	.yres =		400,
-+	.xres_virtual =	640,
-+	.yres_virtual =	400,
-+	.bits_per_pixel = 16,
-+	.red =		{ 0, 5, 0 },
-+	.green =	{ 5, 6, 0 },
-+	.blue =		{ 11, 5, 0 },
-+	.activate =	FB_ACTIVATE_NOW,
-+	.height =	-1,
-+	.width =	-1,
-+	.vmode =	FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo foxfb_fix __initdata = {
-+	.id =		"FOX-VHDL FB",
-+	.type =		FB_TYPE_PACKED_PIXELS,
-+	.visual =	FB_VISUAL_TRUECOLOR,
-+	.xpanstep =	1,
-+	.ypanstep =	1,
-+	.ywrapstep =	1,
-+	.accel =	FB_ACCEL_NONE,
-+};
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_set_par(struct fb_info *info);
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
-+
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+static struct fb_ops foxfb_ops = {
-+	.fb_check_var	= foxfb_check_var,
-+	.fb_set_par		= foxfb_set_par,
-+	.fb_setcolreg	= foxfb_setcolreg,
-+
-+	.fb_pan_display	= foxfb_pan_display,
-+	.fb_fillrect	= foxfb_fillrect, //cfb_fillrect,
-+	.fb_copyarea	= foxfb_copyarea, //cfb_copyarea,
-+	.fb_imageblit	= foxfb_imageblit,//cfb_imageblit,
-+	.fb_mmap	= foxfb_mmap,
-+	.fb_ioctl 	= foxfb_ioctl,
-+};
-+
-+// this function is defined in fbmem.c
-+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+// this should be a free one
-+#define FOX_FBIOGET_SCREEN 	0x4642
-+#define FOX_FBBLIT		0x4643
-+#define FOX_FB_RATE 		0x4645
-+#define FOX_FB_TFT		0x4646
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
-+	void __user *argp = (void __user *)arg;
-+	unsigned int fb_ctl_reg;
-+	switch(cmd){
-+		// this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
-+		case FOX_FBIOGET_SCREEN:
-+			if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
-+				return 0;
-+			} else {
-+				return -1;
-+			};
-+		case FOX_FBBLIT:
-+			fb_ctl_reg = foxbone_read(0x7001);
-+			if(arg){
-+				printk("Enable FB\n");
-+				fb_ctl_reg &= ~(1<<1);
-+			} else {
-+				printk("Disable FB\n");
-+				fb_ctl_reg |= (1<<1);
-+			};		
-+			blitting = arg;
-+			foxbone_write(0x7001, fb_ctl_reg);
-+			break;
-+		case FOX_FB_RATE:
-+			if((arg > 9) || (arg < 1)){
-+				printk("fb0 : Illegal refreshrate\n");
-+				break;
-+			};
-+			refreshrate = arg;
-+			printk("fb0 : new refreshrate\n");
-+			break;
-+		case FOX_FB_TFT:
-+			fb_ctl_reg = foxbone_read(0x7001);
-+			if(arg){
-+				printk("Enable TFT\n");
-+				fb_ctl_reg |= (1<<3);
-+			} else {
-+				printk("Disable TFT\n");
-+				fb_ctl_reg &= ~(1<<3);
-+			};
-+			foxbone_write(0x7001, fb_ctl_reg);
-+			break;
-+		default:
-+			return fb_ioctl(inode, file, cmd, arg);		
-+	};
-+	return 0;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
-+	cfb_fillrect(info, rect);
-+	fb_update = 1;
-+};
-+
-+
-+// TODO add our own optimized code here
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
-+	cfb_copyarea(info, area);
-+	fb_update = 1;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
-+	cfb_imageblit(info, image);
-+	fb_update = 1;
-+};
-+
-+
-+/*
-+ *  Internal routines
-+ */
-+
-+static u_long get_line_length(int xres_virtual, int bpp)
-+{
-+	u_long length;
-+
-+	length = xres_virtual * bpp;
-+	length = (length + 31) & ~31;
-+	length >>= 3;
-+	return (length);
-+}
-+
-+    /*
-+     *  Setting the video mode has been split into two parts.
-+     *  First part, xxxfb_check_var, must not write anything
-+     *  to hardware, it should only verify and adjust var.
-+     *  This means it doesn't alter par but it does use hardware
-+     *  data from it to check this var. 
-+     */
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var,
-+			 struct fb_info *info)
-+{
-+	u_long line_length;
-+
-+	if (var->vmode & FB_VMODE_CONUPDATE) {
-+		var->vmode |= FB_VMODE_YWRAP;
-+		var->xoffset = info->var.xoffset;
-+		var->yoffset = info->var.yoffset;
-+	}
-+
-+	var->xres = 640;
-+	var->yres = 400;
-+	
-+	var->bits_per_pixel = 16;
-+	
-+	if (var->xres_virtual < var->xoffset + var->xres)
-+		var->xres_virtual = var->xoffset + var->xres;
-+	if (var->yres_virtual < var->yoffset + var->yres)
-+		var->yres_virtual = var->yoffset + var->yres;
-+
-+	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-+	if (line_length * var->yres_virtual > videomemorysize)
-+		return -ENOMEM;
-+
-+	var->red.offset = 0;
-+	var->red.length = 5;
-+	var->green.offset = 5;
-+	var->green.length = 6;
-+	var->blue.offset = 11;
-+	var->blue.length = 5;
-+	var->transp.offset = 0;
-+	var->transp.length = 0;
-+	var->red.msb_right = 0;
-+	var->green.msb_right = 0;
-+	var->blue.msb_right = 0;
-+	var->transp.msb_right = 0;
-+
-+	return 0;
-+}
-+
-+
-+
-+/* This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the 
-+ * change in par. For this driver it doesn't do much. 
-+ */
-+static int foxfb_set_par(struct fb_info *info){
-+	info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
-+	return 0;
-+}
-+
-+/*
-+ *  Set a single color register. The values supplied are already
-+ *  rounded down to the hardware's capabilities (according to the
-+ *  entries in the var structure). Return != 0 for invalid regno.
-+ */
-+
-+
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
-+	if (regno >= 256)	/* no. of hw registers */
-+		return 1;
-+
-+	/* grayscale works only partially under directcolor */
-+	if (info->var.grayscale) {
-+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
-+		red = green = blue =
-+		    (red * 77 + green * 151 + blue * 28) >> 8;
-+	}
-+
-+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
-+	switch (info->fix.visual) {
-+	case FB_VISUAL_TRUECOLOR:
-+	case FB_VISUAL_PSEUDOCOLOR:
-+		red = CNVT_TOHW(red, info->var.red.length);
-+		green = CNVT_TOHW(green, info->var.green.length);
-+		blue = CNVT_TOHW(blue, info->var.blue.length);
-+		transp = CNVT_TOHW(transp, info->var.transp.length);
-+		break;
-+	case FB_VISUAL_DIRECTCOLOR:
-+		red = CNVT_TOHW(red, 8);	/* expect 8 bit DAC */
-+		green = CNVT_TOHW(green, 8);
-+		blue = CNVT_TOHW(blue, 8);
-+		/* hey, there is bug in transp handling... */
-+		transp = CNVT_TOHW(transp, 8);
-+		break;
-+	}
-+#undef CNVT_TOHW
-+	/* Truecolor has hardware independent palette */
-+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-+		u32 v;
-+
-+		if (regno >= 16)
-+			return 1;
-+
-+		v = (red << info->var.red.offset) |
-+		    (green << info->var.green.offset) |
-+		    (blue << info->var.blue.offset) |
-+		    (transp << info->var.transp.offset);
-+		switch (info->var.bits_per_pixel) {
-+		case 8:
-+			break;
-+		case 16:
-+			((u32 *) (info->pseudo_palette))[regno] = v;
-+			break;
-+		case 24:
-+		case 32:
-+			((u32 *) (info->pseudo_palette))[regno] = v;
-+			break;
-+		}
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
-+	if (var->vmode & FB_VMODE_YWRAP) {
-+		if (var->yoffset < 0
-+		    || var->yoffset >= info->var.yres_virtual
-+		    || var->xoffset)
-+			return -EINVAL;
-+	} else {
-+		if (var->xoffset + var->xres > info->var.xres_virtual ||
-+		    var->yoffset + var->yres > info->var.yres_virtual)
-+			return -EINVAL;
-+	}
-+	info->var.xoffset = var->xoffset;
-+	info->var.yoffset = var->yoffset;
-+	if (var->vmode & FB_VMODE_YWRAP)
-+		info->var.vmode |= FB_VMODE_YWRAP;
-+	else
-+		info->var.vmode &= ~FB_VMODE_YWRAP;
-+	return 0;
-+}
-+
-+
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
-+        unsigned long page, pos;
-+        unsigned long start = vma->vm_start;
-+        unsigned long size  = vma->vm_end-vma->vm_start;
-+        fb_mmap_enable = 1;
-+	printk("mmap : %ld %ld\n", size, (long)info->fix.smem_len);
-+	//if (size > info->fix.smem_len){
-+        //       return -EINVAL;
-+	//}
-+	pos = (unsigned long) info->screen_base;
-+        while (size > 0) {
-+                page = page_to_pfn(vmalloc_to_page((void *)pos));
-+    	        if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-+        	        return -EAGAIN;
-+	        start += PAGE_SIZE;
-+	        pos += PAGE_SIZE;
-+	        if (size > PAGE_SIZE)
-+	                size -= PAGE_SIZE;
-+	        else
-+	                size = 0;
-+        }
-+        return 0;
-+}
-+
-+
-+// our timer
-+struct timer_list foxfb_timer;
-+
-+// are we currently blitting ?
-+static unsigned char we_are_blitting = 0;
-+
-+// the prototype for the callback
-+static void foxfb_timer_callback(unsigned long ptr);
-+
-+
-+static void tasklet_foxfb(unsigned long data);
-+DECLARE_TASKLET(tl_foxfb_descr, tasklet_foxfb, 0L);
-+static void tasklet_foxfb(unsigned long data){
-+	if(fb_update || fb_mmap_enable	){
-+		FOXVHDL_blit(videomemory);
-+	} else {
-+		DBG(printk("FBWAIT");)
-+	};
-+	we_are_blitting = 0;
-+	fb_update = 0;
-+}
-+
-+
-+// setup the fb timer
-+static void foxfb_timer_setup(void){
-+	init_timer(&foxfb_timer);
-+	foxfb_timer.function = foxfb_timer_callback;
-+	foxfb_timer.data = 0;
-+	foxfb_timer.expires = jiffies + ( HZ / refreshrate);
-+	add_timer(&foxfb_timer);	
-+};
-+
-+
-+// the timer callback function that detects if the card status has changed
-+static void foxfb_timer_callback(unsigned long ptr){
-+	if((!we_are_blitting)){
-+		we_are_blitting = 1;
-+		del_timer(&foxfb_timer);
-+		tasklet_schedule(&tl_foxfb_descr);
-+		foxfb_timer_setup();
-+	};
-+};
-+
-+
-+static void foxfb_platform_release(struct device *device){
-+	// This is called when the reference count goes to zero.
-+}
-+
-+
-+static int __init foxfb_probe(struct platform_device *dev){
-+	struct fb_info *info;
-+	int retval = -ENOMEM;
-+
-+	if (!(videomemory = vmalloc(videomemorysize)))
-+		return retval;
-+		
-+	memset(videomemory, 0, videomemorysize);
-+
-+	info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
-+	if (!info)
-+		goto err;
-+
-+	info->screen_base = (char*)videomemory;
-+	info->fbops = &foxfb_ops;
-+ 	info->fix.smem_len = videomemorysize;
-+	retval = fb_find_mode(&info->var, info, NULL,
-+			      NULL, 0, NULL, 8);
-+
-+	if (!retval || (retval == 4))
-+		info->var = foxfb_default;
-+
-+	info->fix = foxfb_fix;
-+	info->pseudo_palette = info->par;
-+	info->par = NULL;
-+	info->flags = FBINFO_FLAG_DEFAULT;
-+	//info->cursor.mode &= ~CURSOR_BLINK;
-+	retval = fb_alloc_cmap(&info->cmap, 256, 0);
-+	if (retval < 0)
-+		goto err1;
-+
-+	retval = register_framebuffer(info);
-+	if (retval < 0)
-+		goto err2;
-+	platform_set_drvdata(dev, info);
-+
-+	printk(KERN_INFO
-+	       "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
-+	       info->node, videomemorysize >> 10);
-+	
-+	
-+	//FOXVHDL_blit(videomemory);  
-+	foxfb_timer_setup();
-+	return 0;
-+err2:
-+	fb_dealloc_cmap(&info->cmap);
-+err1:
-+	framebuffer_release(info);
-+err:
-+	vfree(videomemory);
-+	return retval;
-+}
-+
-+static int foxfb_remove(struct platform_device *dev)
-+{
-+	struct fb_info *info = platform_get_drvdata(dev);
-+
-+	if (info) {
-+		unregister_framebuffer(info);
-+		vfree(videomemory);
-+		framebuffer_release(info);
-+	}
-+	return 0;
-+}
-+
-+static struct platform_driver foxfb_driver = {
-+	.probe	= foxfb_probe,
-+	.remove = foxfb_remove,
-+	.driver = {
-+		.name	= "foxfb",
-+	},
-+};
-+
-+static struct platform_device foxfb_device = {
-+	.name	= "foxfb",
-+	.id	= 0,
-+	.dev	= {
-+		.release = foxfb_platform_release,
-+	}
-+};
-+
-+static int __init foxfb_init(void)
-+{
-+	int ret = 0;
-+	refreshrate = 8;
-+	printk(KERN_INFO "fb: Initialising framebuffer\n");
-+	
-+	FOXVHDL_init();
-+
-+	ret = platform_driver_register(&foxfb_driver);
-+
-+	if (!ret) {
-+		ret = platform_device_register(&foxfb_device);
-+		if (ret)
-+			platform_driver_unregister(&foxfb_driver);
-+	}	
-+	fb_started = 1;
-+	return ret;
-+}
-+
-+static void __exit foxfb_exit(void)
-+{
-+	platform_device_unregister(&foxfb_device);
-+	platform_driver_unregister(&foxfb_driver);
-+}
-+
-+module_exit(foxfb_exit);
-+module_init(foxfb_init);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
-+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,5 @@
-+# Makefile for fox_vhdl drivers
-+# 23.04.2006 <mailto:john@phrozen.org>
-+
-+# the fox_vhdl_framebuffer driver
-+obj-$(CONFIG_FOX_VHDL_FB)          += foxvhdlfb.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig linux-2.6.19.2/drivers/fox-vhdl/Kconfig
---- linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,274 @@
-+menu "Acmesystems FPGA"
-+
-+config FOX_VHDL
-+	bool "Support for FOX-VHDL Board"
-+	default n
-+
-+config FOX_FPGA
-+	bool "FPGA flash module"
-+	depends on FOX_VHDL
-+	help
-+	Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+	bool "Basic FOXBONE support"
-+	depends on FOX_VHDL
-+	help
-+	Include this to get basic FOXBONE support
-+
-+config VT
-+	bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+	select INPUT
-+	default y if !VIOCONS
-+	---help---
-+	  If you say Y here, you will get support for terminal devices with
-+	  display and keyboard devices. These are called "virtual" because you
-+	  can run several virtual terminals (also called virtual consoles) on
-+	  one physical terminal. This is rather useful, for example one
-+	  virtual terminal can collect system messages and warnings, another
-+	  one can be used for a text-mode user session, and a third could run
-+	  an X session, all in parallel. Switching between virtual terminals
-+	  is done with certain key combinations, usually Alt-<function key>.
-+
-+	  The setterm command ("man setterm") can be used to change the
-+	  properties (such as colors or beeping) of a virtual terminal. The
-+	  man page console_codes(4) ("man console_codes") contains the special
-+	  character sequences that can be used to change those properties
-+	  directly. The fonts used on virtual terminals can be changed with
-+	  the setfont ("man setfont") command and the key bindings are defined
-+	  with the loadkeys ("man loadkeys") command.
-+
-+	  You need at least one virtual terminal device in order to make use
-+	  of your keyboard and monitor. Therefore, only people configuring an
-+	  embedded system would want to say N here in order to save some
-+	  memory; the only way to log into such a system is then via a serial
-+	  or network connection.
-+
-+	  If unsure, say Y, or else you won't be able to do much with your new
-+	  shiny Linux system :-)
-+
-+
-+menu "Framebuffer"	
-+depends on VT
-+
-+config FB
-+	bool "Support for frame buffer devices"
-+	depends on VT
-+	---help---
-+	  The frame buffer device provides an abstraction for the graphics
-+	  hardware. It represents the frame buffer of some video hardware and
-+	  allows application software to access the graphics hardware through
-+	  a well-defined interface, so the software doesn't need to know
-+	  anything about the low-level (hardware register) stuff.
-+
-+	  Frame buffer devices work identically across the different
-+	  architectures supported by Linux and make the implementation of
-+	  application programs easier and more portable; at this point, an X
-+	  server exists which uses the frame buffer device exclusively.
-+	  On several non-X86 architectures, the frame buffer device is the
-+	  only way to use the graphics hardware.
-+
-+	  The device is accessed through special device nodes, usually located
-+	  in the /dev directory, i.e. /dev/fb*.
-+
-+	  You need an utility program called fbset to make full use of frame
-+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+	  and the Framebuffer-HOWTO at
-+	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+	  information.
-+
-+	  Say Y here and to the driver for your graphics board below if you
-+	  are compiling a kernel for a non-x86 architecture.
-+
-+	  If you are compiling for the x86 architecture, you can say Y if you
-+	  want to play with it, but it is not essential. Please note that
-+	  running graphical applications that directly touch the hardware
-+	  (e.g. an accelerated X server) and that are not frame buffer
-+	  device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_fillrect function for generic software rectangle
-+	  filling. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_copyarea function for generic software area copying.
-+	  This is used by drivers that don't provide their own (accelerated)
-+	  version.
-+
-+config FB_CFB_IMAGEBLIT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_imageblit function for generic software image
-+	  blitting. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+config DUMMY_CONSOLE
-+	bool "Dummy Console"
-+	depends on FB
-+	#PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
-+	default n
-+
-+config FRAMEBUFFER_CONSOLE
-+	bool "Framebuffer Console support"
-+	depends on FB
-+	select CRC32
-+	help
-+	  Low-level framebuffer-based console driver.
-+config LOGO
-+	bool "Bootup logo"
-+	depends on FB || SGI_NEWPORT_CONSOLE
-+	help
-+	  Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+	bool "Standard 224-color Linux logo"
-+	depends on LOGO
-+	default y
-+config FONTS
-+	bool "Select compiled-in fonts"
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	help
-+	  Say Y here if you would like to use fonts other than the default
-+	  your frame buffer console usually use.
-+
-+	  Note that the answer to this question won't directly affect the
-+	  kernel: saying N will just cause the configurator to skip all
-+	  the questions about foreign fonts.
-+
-+	  If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+	bool "VGA 8x8 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the text console 80x50 (and higher) modes).
-+
-+	  Note that this is a poor quality font. The VGA 8x16 font is quite a
-+	  lot more readable.
-+
-+	  Given the resolution provided by the frame buffer device, answer N
-+	  here is safe.
-+
-+config FONT_8x16
-+	bool "VGA 8x16 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON 
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the VGA text console 80x25 mode.
-+
-+	  If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+        bool "FOX_VHDL Framebuffer"
-+	depends on FOXBONE
-+	depends on FB
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT				
-+	select VT_CONSOLE
-+	select DUMMY_CONSOLE
-+	select FRAMEBUFFER_CONSOLE
-+	select FONTS
-+	select LOGO
-+	select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+	bool "nano-X keyboard support"
-+	default n
-+	depends on FOX_VHDL_FB
-+	help 
-+	Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+	#source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB 
-+#	source "drivers/video/logo/Kconfig"
-+#endif
-+
-+endmenu
-+
-+
-+config FOXBONE_IO
-+	bool "FOXBONE I/O pins"
-+	depends on FOXBONE
-+	help
-+	Include this to get access to the I/O pins of the foxbone
-+
-+config FOXBONE_TIMEBASE
-+	bool "FOXBONE Timebase"
-+	depends on FOXBONE
-+	help
-+	Include this to get access to the timebase part of the fpga
-+
-+config FOXBONE_MMC
-+	bool "FOXBONE MMC/SD module"
-+	depends on FOXBONE
-+	help
-+	Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-+
-+config FOXBONE_PWM
-+	bool "FOXBONE PWM module"
-+	depends on FOXBONE
-+	help
-+	Include this to enable PWM support into the kernel
-+
-+config FOXBONE_EVENT
-+	bool "FOXBONE EVENT counter module"
-+	depends on FOXBONE
-+	help
-+	Include this to enable foxbone event counter support
-+
-+config FOXBONE_LOOPBACK
-+	bool "FOXBONE Loopback module"
-+	depends on FOXBONE
-+	help
-+	Include this to be able to load the loopback module, that you can base your own driver on
-+
-+config FOXBONE_MULTIPLY
-+	bool "FOXBONE Multiplier example"
-+	depends on FOXBONE
-+	help
-+	Include this to use the 64 bit multiplier
-+
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+	bool "FOXBONE example interrupt handlers"
-+	depends on FOXBONE
-+	
-+config FOXBONE_INT14
-+	bool "Int 14 - bit 0 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
-+
-+config FOXBONE_INT31
-+	bool "Int 31 - bit 1 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
-+
-+endmenu	
-+
-+
-+config ETRAX_CMDLINE
-+	string "Kernel command line" 
-+	default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+	help
-+	use if no framebuffer is enabled console=ttyS0
-+	use if framebuffer is enabled console=tty0
-+					
-+endmenu
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_NANOXKBD)          += nanoxkbd.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,173 @@
-+/*  
-+  nanoxkbd.c
-+  Linux Kernel Driver for Nanox Keyboard driver for FOX VHDL Board framebuffer
-+  (based on FoxBone protocol interface specifications rel 0.7)    
-+  For more info see: http://www.acmesystems.it/?id=120
-+  Author: John Crispin
-+  Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+  
-+  This is free software; you can redistribute it and/or modify
-+  it under the terms of the GNU General Public License as published by
-+  the Free Software Foundation; either version 2 of the License, or
-+  (at your option) any later version.
-+    
-+  This example is distributed in the hope that it will be useful,
-+  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+  GNU General Public License for more details.
-+    
-+  To have a copy of the GNU General Public License write to the Free Software
-+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>  
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME 			"keyboard"
-+#define DEV_MAJOR 			195
-+
-+
-+unsigned char nanoxkbd_is_open = 0;
-+
-+#define MAX_KEYS 128
-+unsigned int keys[MAX_KEYS];
-+unsigned char keys_count = 0;
-+unsigned char keys_pos = 0;
-+
-+#define IOCTL_NANOXKBD_GET		0x7878
-+
-+unsigned char nanoxkbd_add(unsigned int keycode){
-+	if(nanoxkbd_is_open){
-+		if(keys_count < MAX_KEYS){			
-+			keys[(keys_pos + keys_count) % MAX_KEYS] = keycode;
-+			keys_count++;
-+			printk("got key %d, %d, %d\n", keycode, keys_pos, keys_count);
-+		};
-+		return 1;
-+	};
-+	return 0;
-+};
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+	//copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+	//copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+	int retval = 0;
-+	switch (cmd) {
-+		case IOCTL_NANOXKBD_GET:
-+			if(keys_count > 0){
-+				keys_count--;
-+				copy_to_user((char*)arg, (char*)&keys[keys_pos], sizeof(unsigned int));
-+				keys_pos++;
-+				if(keys_pos >= MAX_KEYS){
-+					keys_pos = 0;
-+				};
-+				retval = 1;
-+			};
-+			break;
-+				
-+		default:
-+			printk("nanoxkbd: unknown ioctl\n");
-+			break;			
-+	}
-+
-+	return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// we only supprt minor 0 at the moment
-+	if(dev_minor !=  0){
-+		printk("nanoxkbd: trying to access unknown minor device -> %d\n", dev_minor);
-+		return -ENODEV;
-+	}
-+	
-+	// check if another app is currently using the device
-+	if(nanoxkbd_is_open) {
-+		printk("nanoxkbd: Device with minor ID %d already in use\n", dev_minor);
-+		return -EBUSY;
-+	}
-+	nanoxkbd_is_open = 1;
-+	
-+	// more flaming
-+	printk("nanoxkbd: Minor %d has been opened\n", dev_minor);
-+	return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+	// Which minor device is the user trying to access ?
-+	unsigned int dev_minor = MINOR(inode->i_rdev);
-+	
-+	// remember that the device has been closed
-+	nanoxkbd_is_open = 0;
-+	
-+	
-+	// more flaming
-+	printk("nanoxkbd: Minor %d has been closed\n", dev_minor);
-+	
-+	return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations nanoxkbd_module_fops = {
-+        ioctl:         module_ioctl,
-+        open:          module_open,
-+        release:       module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+	// flame the kprintk
-+	printk("nanoxkbd: FOX-VHDL FPGA io module\n");
-+	//printk("nanoxkbd: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+	//printk("nanoxkbd: Starting ...\n");
-+	
-+	// register the character device
-+	if(register_chrdev(DEV_MAJOR, DEV_NAME, &nanoxkbd_module_fops)) {
-+		printk( "nanoxkbd: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+		return( -ENODEV );
-+	};
-+	
-+
-+	// remember that the driver has been opened
-+	nanoxkbd_is_open = 0;
-+	printk("nanoxkbd: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+	return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+	printk( "nanoxkbd: Cleanup\n" );
-+	// tell the kernel that the device is not needed anymore
-+	unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+	
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile linux-2.6.19.2/drivers/fox-vhdl/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/Makefile	2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,13 @@
-+#
-+# Makefile for the i2c core.
-+#
-+obj-$(CONFIG_FOXBONE)		+= foxbone/
-+obj-$(CONFIG_FOX_VHDL_FB)	+= fox_vhdl_fb/
-+obj-$(CONFIG_FOX_FPGA)		+= fox_fpga_flash/
-+obj-$(CONFIG_FOXBONE_PWM)	+= fox_pwm/		
-+obj-$(CONFIG_FOXBONE_IO)	+= fox_io/
-+obj-$(CONFIG_FOXBONE_TIMEBASE) 	+= fox_timebase/
-+obj-$(CONFIG_FOXBONE_LOOPBACK)  += fox_loopback/
-+obj-$(CONFIG_FOXBONE_EVENT)  	+= fox_event/
-+obj-$(CONFIG_FOXBONE_MULTIPLY)	+= fox_multiply/	
-+obj-$(CONFIG_NANOXKBD) 		+= keyboard/
---- linux-2.6.19.2.orig/arch/cris/Kconfig	2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig	2007-06-17 02:46:15.000000000 +0200
-@@ -1,244 +1,274 @@
--#
--# For a description of the syntax of this configuration file,
--# see the Configure script.
--#
-+menu "Acmesystems FPGA"
- 
--mainmenu "Linux/CRIS Kernel Configuration"
--
--config MMU
--	bool
--	default y
--
--config RWSEM_GENERIC_SPINLOCK
--	bool
--	default y
--
--config RWSEM_XCHGADD_ALGORITHM
--	bool
--
--config GENERIC_IOMAP
--       bool
--       default y
--
--config GENERIC_FIND_NEXT_BIT
--	bool
--	default y
--
--config GENERIC_HWEIGHT
--	bool
-+config FOX_VHDL
-+	bool "Support for FOX-VHDL Board"
-+	default n
-+
-+config FOX_FPGA
-+	bool "FPGA flash module"
-+	depends on FOX_VHDL
-+	help
-+	Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+	bool "Basic FOXBONE support"
-+	depends on FOX_VHDL
-+	help
-+	Include this to get basic FOXBONE support
-+
-+config VT
-+	bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+	select INPUT
-+	default y if !VIOCONS
-+	---help---
-+	  If you say Y here, you will get support for terminal devices with
-+	  display and keyboard devices. These are called "virtual" because you
-+	  can run several virtual terminals (also called virtual consoles) on
-+	  one physical terminal. This is rather useful, for example one
-+	  virtual terminal can collect system messages and warnings, another
-+	  one can be used for a text-mode user session, and a third could run
-+	  an X session, all in parallel. Switching between virtual terminals
-+	  is done with certain key combinations, usually Alt-<function key>.
-+
-+	  The setterm command ("man setterm") can be used to change the
-+	  properties (such as colors or beeping) of a virtual terminal. The
-+	  man page console_codes(4) ("man console_codes") contains the special
-+	  character sequences that can be used to change those properties
-+	  directly. The fonts used on virtual terminals can be changed with
-+	  the setfont ("man setfont") command and the key bindings are defined
-+	  with the loadkeys ("man loadkeys") command.
-+
-+	  You need at least one virtual terminal device in order to make use
-+	  of your keyboard and monitor. Therefore, only people configuring an
-+	  embedded system would want to say N here in order to save some
-+	  memory; the only way to log into such a system is then via a serial
-+	  or network connection.
-+
-+	  If unsure, say Y, or else you won't be able to do much with your new
-+	  shiny Linux system :-)
-+
-+
-+menu "Framebuffer"	
-+depends on VT
-+
-+config FB
-+	bool "Support for frame buffer devices"
-+	depends on VT
-+	---help---
-+	  The frame buffer device provides an abstraction for the graphics
-+	  hardware. It represents the frame buffer of some video hardware and
-+	  allows application software to access the graphics hardware through
-+	  a well-defined interface, so the software doesn't need to know
-+	  anything about the low-level (hardware register) stuff.
-+
-+	  Frame buffer devices work identically across the different
-+	  architectures supported by Linux and make the implementation of
-+	  application programs easier and more portable; at this point, an X
-+	  server exists which uses the frame buffer device exclusively.
-+	  On several non-X86 architectures, the frame buffer device is the
-+	  only way to use the graphics hardware.
-+
-+	  The device is accessed through special device nodes, usually located
-+	  in the /dev directory, i.e. /dev/fb*.
-+
-+	  You need an utility program called fbset to make full use of frame
-+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+	  and the Framebuffer-HOWTO at
-+	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+	  information.
-+
-+	  Say Y here and to the driver for your graphics board below if you
-+	  are compiling a kernel for a non-x86 architecture.
-+
-+	  If you are compiling for the x86 architecture, you can say Y if you
-+	  want to play with it, but it is not essential. Please note that
-+	  running graphical applications that directly touch the hardware
-+	  (e.g. an accelerated X server) and that are not frame buffer
-+	  device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_fillrect function for generic software rectangle
-+	  filling. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_copyarea function for generic software area copying.
-+	  This is used by drivers that don't provide their own (accelerated)
-+	  version.
-+
-+config FB_CFB_IMAGEBLIT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_imageblit function for generic software image
-+	  blitting. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+config DUMMY_CONSOLE
-+	bool "Dummy Console"
-+	depends on FB
-+	#PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
-+	default n
-+
-+config FRAMEBUFFER_CONSOLE
-+	bool "Framebuffer Console support"
-+	depends on FB
-+	select CRC32
-+	help
-+	  Low-level framebuffer-based console driver.
-+config LOGO
-+	bool "Bootup logo"
-+	depends on FB || SGI_NEWPORT_CONSOLE
-+	help
-+	  Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+	bool "Standard 224-color Linux logo"
-+	depends on LOGO
- 	default y
--
--config GENERIC_CALIBRATE_DELAY
--	bool
--	default y
--
--config IRQ_PER_CPU
--	bool
--	default y
--
--config CRIS
--	bool
--	default y
--
--source "init/Kconfig"
--
--menu "General setup"
--
--source "fs/Kconfig.binfmt"
--
--config GENERIC_HARDIRQS
--	bool
--	default y
--
--config SMP
--       bool "SMP"
--       help
--         SMP support. Always Say N.
--
--config NR_CPUS
--       int
--       depends on SMP
--       default 2
--
--config SCHED_MC
--	bool "Multi-core scheduler support"
--	depends on SMP
--	default y
--	help
--	  Multi-core scheduler support improves the CPU scheduler's decision
--	  making when dealing with multi-core CPU chips at a cost of slightly
--	  increased overhead in some places. If unsure say N here.
--
--config ETRAX_CMDLINE
--	string "Kernel command line"
--	default "root=/dev/mtdblock3"
--	help
--	  Pass additional commands to the kernel.
--
--config ETRAX_WATCHDOG
--	bool "Enable ETRAX watchdog"
--	help
--	  Enable the built-in watchdog timer support on ETRAX based embedded
--	  network computers.
--
--config ETRAX_WATCHDOG_NICE_DOGGY
--	bool "Disable watchdog during Oops printouts"
--	depends on ETRAX_WATCHDOG
--	help
--	  By enabling this you make sure that the watchdog does not bite while
--	  printing oopses. Recommended for development systems but not for
--	  production releases.
--
--config ETRAX_FAST_TIMER
--       bool "Enable ETRAX fast timer API"
--       help
--         This options enables the API to a fast timer implementation using
--	 timer1 to get sub jiffie resolution timers (primarily one-shot
--	 timers).
--	 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
--
--config OOM_REBOOT
--       bool "Enable reboot at out of memory"
--
--source "kernel/Kconfig.preempt"
--source "kernel/Kconfig.sched"
--
--source mm/Kconfig
-+config FONTS
-+	bool "Select compiled-in fonts"
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	help
-+	  Say Y here if you would like to use fonts other than the default
-+	  your frame buffer console usually use.
-+
-+	  Note that the answer to this question won't directly affect the
-+	  kernel: saying N will just cause the configurator to skip all
-+	  the questions about foreign fonts.
-+
-+	  If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+	bool "VGA 8x8 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the text console 80x50 (and higher) modes).
-+
-+	  Note that this is a poor quality font. The VGA 8x16 font is quite a
-+	  lot more readable.
-+
-+	  Given the resolution provided by the frame buffer device, answer N
-+	  here is safe.
-+
-+config FONT_8x16
-+	bool "VGA 8x16 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON 
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the VGA text console 80x25 mode.
-+
-+	  If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+        bool "FOX_VHDL Framebuffer"
-+	depends on FOXBONE
-+	depends on FB
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT				
-+	select VT_CONSOLE
-+	select DUMMY_CONSOLE
-+	select FRAMEBUFFER_CONSOLE
-+	select FONTS
-+	select LOGO
-+	select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+	bool "nano-X keyboard support"
-+	default n
-+	depends on FOX_VHDL_FB
-+	help 
-+	Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+	#source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB 
-+#	source "drivers/video/logo/Kconfig"
-+#endif
- 
- endmenu
- 
--menu "Hardware setup"
--
--choice
--	prompt "Processor type"
--	default ETRAX100LX
- 
--config ETRAX100LX
--	bool "ETRAX-100LX-v1"
-+config FOXBONE_IO
-+	bool "FOXBONE I/O pins"
-+	depends on FOXBONE
- 	help
--	  Support version 1 of the ETRAX 100LX.
-+	Include this to get access to the I/O pins of the foxbone
- 
--config ETRAX100LX_V2
--	bool "ETRAX-100LX-v2"
-+config FOXBONE_TIMEBASE
-+	bool "FOXBONE Timebase"
-+	depends on FOXBONE
- 	help
--	  Support version 2 of the ETRAX 100LX.
-+	Include this to get access to the timebase part of the fpga
- 
--config SVINTO_SIM
--	bool "ETRAX-100LX-for-xsim-simulator"
-+config FOXBONE_MMC
-+	bool "FOXBONE MMC/SD module"
-+	depends on FOXBONE
- 	help
--	  Support the xsim ETRAX Simulator.
-+	Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
- 
--config ETRAXFS
--	bool "ETRAX-FS-V32"
-+config FOXBONE_PWM
-+	bool "FOXBONE PWM module"
-+	depends on FOXBONE
- 	help
--	  Support CRIS V32.
-+	Include this to enable PWM support into the kernel
- 
--config ETRAXFS_SIM
--	bool "ETRAX-FS-V32-Simulator"
-+config FOXBONE_EVENT
-+	bool "FOXBONE EVENT counter module"
-+	depends on FOXBONE
- 	help
--	  Support CRIS V32 VCS simualtor.
-+	Include this to enable foxbone event counter support
- 
--endchoice
--
--config ETRAX_ARCH_V10
--       bool
--       default y if ETRAX100LX || ETRAX100LX_V2
--       default n if !(ETRAX100LX || ETRAX100LX_V2)
--
--config ETRAX_ARCH_V32
--       bool
--       default y if ETRAXFS || ETRAXFS_SIM
--       default n if !(ETRAXFS || ETRAXFS_SIM) 
--
--config ETRAX_DRAM_SIZE
--	int "DRAM size (dec, in MB)"
--	default "8"
-+config FOXBONE_LOOPBACK
-+	bool "FOXBONE Loopback module"
-+	depends on FOXBONE
- 	help
--	  Size of DRAM (decimal in MB) typically 2, 8 or 16.
-+	Include this to be able to load the loopback module, that you can base your own driver on
- 
--config ETRAX_FLASH_BUSWIDTH
--	int "Buswidth of NOR flash in bytes"
--	default "2"
-+config FOXBONE_MULTIPLY
-+	bool "FOXBONE Multiplier example"
-+	depends on FOXBONE
- 	help
--	  Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
-+	Include this to use the 64 bit multiplier
- 
--config ETRAX_NANDFLASH_BUSWIDTH
--	int "Buswidth of NAND flash in bytes"
--	default "1"
--	help
--	  Width in bytes of the NAND flash (1 or 2).
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+	bool "FOXBONE example interrupt handlers"
-+	depends on FOXBONE
-+	
-+config FOXBONE_INT14
-+	bool "Int 14 - bit 0 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
- 
--config ETRAX_FLASH1_SIZE
--       int "FLASH1 size (dec, in MB. 0 = Unknown)"
--       default "0"
-+config FOXBONE_INT31
-+	bool "Int 31 - bit 1 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
- 
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/Kconfig
-+endmenu	
- 
--endmenu
--
--source "net/Kconfig"
--
--# bring in ETRAX built-in drivers
--menu "Drivers for built-in interfaces"
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/drivers/Kconfig
- 
-+config ETRAX_CMDLINE
-+	string "Kernel command line" 
-+	default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+	help
-+	use if no framebuffer is enabled console=ttyS0
-+	use if framebuffer is enabled console=tty0
-+					
- endmenu
--
--source "drivers/base/Kconfig"
--
--# standard linux drivers
--source "drivers/mtd/Kconfig"
--
--source "drivers/parport/Kconfig"
--
--source "drivers/pnp/Kconfig"
--
--source "drivers/block/Kconfig"
--
--source "drivers/md/Kconfig"
--
--source "drivers/ide/Kconfig"
--
--source "drivers/scsi/Kconfig"
--
--source "drivers/ieee1394/Kconfig"
--
--source "drivers/message/i2o/Kconfig"
--
--source "drivers/net/Kconfig"
--
--source "drivers/isdn/Kconfig"
--
--source "drivers/telephony/Kconfig"
--
--source "drivers/cdrom/Kconfig"
--
--#
--# input before char - char/joystick depends on it. As does USB.
--#
--source "drivers/input/Kconfig"
--
--source "drivers/char/Kconfig"
--
--#source drivers/misc/Config.in
--source "drivers/media/Kconfig"
--
--source "fs/Kconfig"
--
--source "sound/Kconfig"
--
--source "drivers/pcmcia/Kconfig"
--
--source "drivers/pci/Kconfig"
--
--source "drivers/usb/Kconfig"
--
--source "arch/cris/Kconfig.debug"
--
--source "security/Kconfig"
--
--source "crypto/Kconfig"
--
--source "lib/Kconfig"
---- linux-2.6.19.2.orig/arch/cris/Kconfig	2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig	2007-06-17 02:46:15.000000000 +0200
-@@ -1,244 +1,274 @@
--#
--# For a description of the syntax of this configuration file,
--# see the Configure script.
--#
-+menu "Acmesystems FPGA"
- 
--mainmenu "Linux/CRIS Kernel Configuration"
--
--config MMU
--	bool
--	default y
--
--config RWSEM_GENERIC_SPINLOCK
--	bool
--	default y
--
--config RWSEM_XCHGADD_ALGORITHM
--	bool
--
--config GENERIC_IOMAP
--       bool
--       default y
--
--config GENERIC_FIND_NEXT_BIT
--	bool
--	default y
--
--config GENERIC_HWEIGHT
--	bool
-+config FOX_VHDL
-+	bool "Support for FOX-VHDL Board"
-+	default n
-+
-+config FOX_FPGA
-+	bool "FPGA flash module"
-+	depends on FOX_VHDL
-+	help
-+	Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+	bool "Basic FOXBONE support"
-+	depends on FOX_VHDL
-+	help
-+	Include this to get basic FOXBONE support
-+
-+config VT
-+	bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+	select INPUT
-+	default y if !VIOCONS
-+	---help---
-+	  If you say Y here, you will get support for terminal devices with
-+	  display and keyboard devices. These are called "virtual" because you
-+	  can run several virtual terminals (also called virtual consoles) on
-+	  one physical terminal. This is rather useful, for example one
-+	  virtual terminal can collect system messages and warnings, another
-+	  one can be used for a text-mode user session, and a third could run
-+	  an X session, all in parallel. Switching between virtual terminals
-+	  is done with certain key combinations, usually Alt-<function key>.
-+
-+	  The setterm command ("man setterm") can be used to change the
-+	  properties (such as colors or beeping) of a virtual terminal. The
-+	  man page console_codes(4) ("man console_codes") contains the special
-+	  character sequences that can be used to change those properties
-+	  directly. The fonts used on virtual terminals can be changed with
-+	  the setfont ("man setfont") command and the key bindings are defined
-+	  with the loadkeys ("man loadkeys") command.
-+
-+	  You need at least one virtual terminal device in order to make use
-+	  of your keyboard and monitor. Therefore, only people configuring an
-+	  embedded system would want to say N here in order to save some
-+	  memory; the only way to log into such a system is then via a serial
-+	  or network connection.
-+
-+	  If unsure, say Y, or else you won't be able to do much with your new
-+	  shiny Linux system :-)
-+
-+
-+menu "Framebuffer"	
-+depends on VT
-+
-+config FB
-+	bool "Support for frame buffer devices"
-+	depends on VT
-+	---help---
-+	  The frame buffer device provides an abstraction for the graphics
-+	  hardware. It represents the frame buffer of some video hardware and
-+	  allows application software to access the graphics hardware through
-+	  a well-defined interface, so the software doesn't need to know
-+	  anything about the low-level (hardware register) stuff.
-+
-+	  Frame buffer devices work identically across the different
-+	  architectures supported by Linux and make the implementation of
-+	  application programs easier and more portable; at this point, an X
-+	  server exists which uses the frame buffer device exclusively.
-+	  On several non-X86 architectures, the frame buffer device is the
-+	  only way to use the graphics hardware.
-+
-+	  The device is accessed through special device nodes, usually located
-+	  in the /dev directory, i.e. /dev/fb*.
-+
-+	  You need an utility program called fbset to make full use of frame
-+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+	  and the Framebuffer-HOWTO at
-+	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+	  information.
-+
-+	  Say Y here and to the driver for your graphics board below if you
-+	  are compiling a kernel for a non-x86 architecture.
-+
-+	  If you are compiling for the x86 architecture, you can say Y if you
-+	  want to play with it, but it is not essential. Please note that
-+	  running graphical applications that directly touch the hardware
-+	  (e.g. an accelerated X server) and that are not frame buffer
-+	  device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_fillrect function for generic software rectangle
-+	  filling. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_copyarea function for generic software area copying.
-+	  This is used by drivers that don't provide their own (accelerated)
-+	  version.
-+
-+config FB_CFB_IMAGEBLIT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_imageblit function for generic software image
-+	  blitting. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+config DUMMY_CONSOLE
-+	bool "Dummy Console"
-+	depends on FB
-+	#PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
-+	default n
-+
-+config FRAMEBUFFER_CONSOLE
-+	bool "Framebuffer Console support"
-+	depends on FB
-+	select CRC32
-+	help
-+	  Low-level framebuffer-based console driver.
-+config LOGO
-+	bool "Bootup logo"
-+	depends on FB || SGI_NEWPORT_CONSOLE
-+	help
-+	  Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+	bool "Standard 224-color Linux logo"
-+	depends on LOGO
- 	default y
--
--config GENERIC_CALIBRATE_DELAY
--	bool
--	default y
--
--config IRQ_PER_CPU
--	bool
--	default y
--
--config CRIS
--	bool
--	default y
--
--source "init/Kconfig"
--
--menu "General setup"
--
--source "fs/Kconfig.binfmt"
--
--config GENERIC_HARDIRQS
--	bool
--	default y
--
--config SMP
--       bool "SMP"
--       help
--         SMP support. Always Say N.
--
--config NR_CPUS
--       int
--       depends on SMP
--       default 2
--
--config SCHED_MC
--	bool "Multi-core scheduler support"
--	depends on SMP
--	default y
--	help
--	  Multi-core scheduler support improves the CPU scheduler's decision
--	  making when dealing with multi-core CPU chips at a cost of slightly
--	  increased overhead in some places. If unsure say N here.
--
--config ETRAX_CMDLINE
--	string "Kernel command line"
--	default "root=/dev/mtdblock3"
--	help
--	  Pass additional commands to the kernel.
--
--config ETRAX_WATCHDOG
--	bool "Enable ETRAX watchdog"
--	help
--	  Enable the built-in watchdog timer support on ETRAX based embedded
--	  network computers.
--
--config ETRAX_WATCHDOG_NICE_DOGGY
--	bool "Disable watchdog during Oops printouts"
--	depends on ETRAX_WATCHDOG
--	help
--	  By enabling this you make sure that the watchdog does not bite while
--	  printing oopses. Recommended for development systems but not for
--	  production releases.
--
--config ETRAX_FAST_TIMER
--       bool "Enable ETRAX fast timer API"
--       help
--         This options enables the API to a fast timer implementation using
--	 timer1 to get sub jiffie resolution timers (primarily one-shot
--	 timers).
--	 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
--
--config OOM_REBOOT
--       bool "Enable reboot at out of memory"
--
--source "kernel/Kconfig.preempt"
--source "kernel/Kconfig.sched"
--
--source mm/Kconfig
-+config FONTS
-+	bool "Select compiled-in fonts"
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	help
-+	  Say Y here if you would like to use fonts other than the default
-+	  your frame buffer console usually use.
-+
-+	  Note that the answer to this question won't directly affect the
-+	  kernel: saying N will just cause the configurator to skip all
-+	  the questions about foreign fonts.
-+
-+	  If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+	bool "VGA 8x8 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the text console 80x50 (and higher) modes).
-+
-+	  Note that this is a poor quality font. The VGA 8x16 font is quite a
-+	  lot more readable.
-+
-+	  Given the resolution provided by the frame buffer device, answer N
-+	  here is safe.
-+
-+config FONT_8x16
-+	bool "VGA 8x16 font" if FONTS
-+	depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON 
-+	default y if !SPARC && !FONTS
-+	help
-+	  This is the "high resolution" font for the VGA frame buffer (the one
-+	  provided by the VGA text console 80x25 mode.
-+
-+	  If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+        bool "FOX_VHDL Framebuffer"
-+	depends on FOXBONE
-+	depends on FB
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT				
-+	select VT_CONSOLE
-+	select DUMMY_CONSOLE
-+	select FRAMEBUFFER_CONSOLE
-+	select FONTS
-+	select LOGO
-+	select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+	bool "nano-X keyboard support"
-+	default n
-+	depends on FOX_VHDL_FB
-+	help 
-+	Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+	#source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB 
-+#	source "drivers/video/logo/Kconfig"
-+#endif
- 
- endmenu
- 
--menu "Hardware setup"
--
--choice
--	prompt "Processor type"
--	default ETRAX100LX
- 
--config ETRAX100LX
--	bool "ETRAX-100LX-v1"
-+config FOXBONE_IO
-+	bool "FOXBONE I/O pins"
-+	depends on FOXBONE
- 	help
--	  Support version 1 of the ETRAX 100LX.
-+	Include this to get access to the I/O pins of the foxbone
- 
--config ETRAX100LX_V2
--	bool "ETRAX-100LX-v2"
-+config FOXBONE_TIMEBASE
-+	bool "FOXBONE Timebase"
-+	depends on FOXBONE
- 	help
--	  Support version 2 of the ETRAX 100LX.
-+	Include this to get access to the timebase part of the fpga
- 
--config SVINTO_SIM
--	bool "ETRAX-100LX-for-xsim-simulator"
-+config FOXBONE_MMC
-+	bool "FOXBONE MMC/SD module"
-+	depends on FOXBONE
- 	help
--	  Support the xsim ETRAX Simulator.
-+	Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
- 
--config ETRAXFS
--	bool "ETRAX-FS-V32"
-+config FOXBONE_PWM
-+	bool "FOXBONE PWM module"
-+	depends on FOXBONE
- 	help
--	  Support CRIS V32.
-+	Include this to enable PWM support into the kernel
- 
--config ETRAXFS_SIM
--	bool "ETRAX-FS-V32-Simulator"
-+config FOXBONE_EVENT
-+	bool "FOXBONE EVENT counter module"
-+	depends on FOXBONE
- 	help
--	  Support CRIS V32 VCS simualtor.
-+	Include this to enable foxbone event counter support
- 
--endchoice
--
--config ETRAX_ARCH_V10
--       bool
--       default y if ETRAX100LX || ETRAX100LX_V2
--       default n if !(ETRAX100LX || ETRAX100LX_V2)
--
--config ETRAX_ARCH_V32
--       bool
--       default y if ETRAXFS || ETRAXFS_SIM
--       default n if !(ETRAXFS || ETRAXFS_SIM) 
--
--config ETRAX_DRAM_SIZE
--	int "DRAM size (dec, in MB)"
--	default "8"
-+config FOXBONE_LOOPBACK
-+	bool "FOXBONE Loopback module"
-+	depends on FOXBONE
- 	help
--	  Size of DRAM (decimal in MB) typically 2, 8 or 16.
-+	Include this to be able to load the loopback module, that you can base your own driver on
- 
--config ETRAX_FLASH_BUSWIDTH
--	int "Buswidth of NOR flash in bytes"
--	default "2"
-+config FOXBONE_MULTIPLY
-+	bool "FOXBONE Multiplier example"
-+	depends on FOXBONE
- 	help
--	  Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
-+	Include this to use the 64 bit multiplier
- 
--config ETRAX_NANDFLASH_BUSWIDTH
--	int "Buswidth of NAND flash in bytes"
--	default "1"
--	help
--	  Width in bytes of the NAND flash (1 or 2).
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+	bool "FOXBONE example interrupt handlers"
-+	depends on FOXBONE
-+	
-+config FOXBONE_INT14
-+	bool "Int 14 - bit 0 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
- 
--config ETRAX_FLASH1_SIZE
--       int "FLASH1 size (dec, in MB. 0 = Unknown)"
--       default "0"
-+config FOXBONE_INT31
-+	bool "Int 31 - bit 1 of reg 0x13 set"
-+	depends on FOXBONE_SAMPLE_ISR
- 
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/Kconfig
-+endmenu	
- 
--endmenu
--
--source "net/Kconfig"
--
--# bring in ETRAX built-in drivers
--menu "Drivers for built-in interfaces"
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/drivers/Kconfig
- 
-+config ETRAX_CMDLINE
-+	string "Kernel command line" 
-+	default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+	help
-+	use if no framebuffer is enabled console=ttyS0
-+	use if framebuffer is enabled console=tty0
-+					
- endmenu
--
--source "drivers/base/Kconfig"
--
--# standard linux drivers
--source "drivers/mtd/Kconfig"
--
--source "drivers/parport/Kconfig"
--
--source "drivers/pnp/Kconfig"
--
--source "drivers/block/Kconfig"
--
--source "drivers/md/Kconfig"
--
--source "drivers/ide/Kconfig"
--
--source "drivers/scsi/Kconfig"
--
--source "drivers/ieee1394/Kconfig"
--
--source "drivers/message/i2o/Kconfig"
--
--source "drivers/net/Kconfig"
--
--source "drivers/isdn/Kconfig"
--
--source "drivers/telephony/Kconfig"
--
--source "drivers/cdrom/Kconfig"
--
--#
--# input before char - char/joystick depends on it. As does USB.
--#
--source "drivers/input/Kconfig"
--
--source "drivers/char/Kconfig"
--
--#source drivers/misc/Config.in
--source "drivers/media/Kconfig"
--
--source "fs/Kconfig"
--
--source "sound/Kconfig"
--
--source "drivers/pcmcia/Kconfig"
--
--source "drivers/pci/Kconfig"
--
--source "drivers/usb/Kconfig"
--
--source "arch/cris/Kconfig.debug"
--
--source "security/Kconfig"
--
--source "crypto/Kconfig"
--
--source "lib/Kconfig"
---- linux-2.6.19.2.orig/arch/cris/Kconfig	2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/Kconfig	2007-06-17 02:52:11.000000000 +0200
-@@ -242,3 +242,6 @@
- source "crypto/Kconfig"
- 
- source "lib/Kconfig"
-+menu "Acmesystems"
-+source "drivers/fox-vhdl/Kconfig"
-+endmenu
-79a80
-> obj-$(CONFIG_FOX_VHDL) += fox-vhdl/
-diff -urN linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h linux-2.6.19.2/include/linux/foxbone_syscalls.h
---- linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/include/linux/foxbone_syscalls.h	2007-06-17 03:31:39.000000000 +0200
-@@ -0,0 +1,18 @@
-+#ifndef __LINUX_SYSCALL_FOXBONE
-+#define __LINUX_SYSCALL_FOXBONE
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <asm/unistd.h>
-+
-+extern int errno;
-+_syscall1(void, foxbonereset, unsigned short int, reg);
-+_syscall1(unsigned short int, foxboneread, unsigned short int, reg);
-+_syscall2(void, foxbonewrite, unsigned short int, reg, unsigned short int, value);
-+_syscall3(void, foxbonebulkread, unsigned short int, reg, unsigned short int *, value, unsigned int, length);
-+_syscall3(void, foxbonebulkwrite, unsigned short int, reg, unsigned short int *, value, unsigned int, length);  
-+_syscall2(void, foxboneintreg, unsigned long int, interrupt, unsigned char, state);
-+_syscall1(unsigned int, foxboneintcheck, unsigned long int, interrupt);
-+_syscall2(unsigned int, foxboneintwait, unsigned long int, interrupt, unsigned char, timeout);
-+
-+#endif