strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

1 files changed, 0 insertions, 237 deletions

diff --git a/target/linux/etrax-2.6/config/default b/target/linux/etrax-2.6/config/default
deleted file mode 100644
index 8a1d36229d..0000000000
--- a/target/linux/etrax-2.6/config/default
+++ /dev/null
@@ -1,237 +0,0 @@
-CONFIG_BASE_SMALL=0
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CRIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_ETRAX100LX is not set
-CONFIG_ETRAX100LX_V2=y
-# CONFIG_ETRAXFS is not set
-# CONFIG_ETRAXFS_SIM is not set
-CONFIG_ETRAX_ARCH_V10=y
-# CONFIG_ETRAX_ARCH_V32 is not set
-CONFIG_ETRAX_AXISFLASHMAP=y
-# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set
-CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_DEBUG_PORT_NULL=y
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
-# CONFIG_ETRAX_DEF_R_PORT_G_DIR is not set
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce
-CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737
-CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
-CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
-CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_DS1302=y
-CONFIG_ETRAX_DS1302_RSTBIT=2
-CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
-CONFIG_ETRAX_DS1302_SCLBIT=1
-CONFIG_ETRAX_DS1302_SDABIT=0
-CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
-CONFIG_ETRAX_ETHERNET=y
-CONFIG_ETRAX_FAST_TIMER=y
-CONFIG_ETRAX_FLASH1_SIZE=0
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_I2C=y
-CONFIG_ETRAX_I2C_CLK_PORT=1
-CONFIG_ETRAX_I2C_DATA_PORT=0
-# CONFIG_ETRAX_I2C_EEPROM is not set
-CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
-# CONFIG_ETRAX_IDE is not set
-CONFIG_ETRAX_LED1G=2
-CONFIG_ETRAX_LED1R=2
-CONFIG_ETRAX_LED2G=3
-CONFIG_ETRAX_LED2R=3
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-# CONFIG_ETRAX_NO_PHY is not set
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF
-CONFIG_ETRAX_PA_LEDS=y
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
-# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_PCF8563 is not set
-CONFIG_ETRAX_PTABLE_SECTOR=0
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-# CONFIG_ETRAX_RS485 is not set
-CONFIG_ETRAX_RTC=y
-CONFIG_ETRAX_SDRAM=y
-CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
-CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
-CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1
-CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
-CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1
-CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1
-# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set
-CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
-# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
-# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
-CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
-CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_CD_ON_PA_BIT=7
-CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=6
-CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=4
-CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1
-# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set
-# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE is not set
-CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA=y
-# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
-CONFIG_ETRAX_SER2_RI_ON_PA_BIT=5
-CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
-CONFIG_ETRAX_SER3_CD_ON_PA_BIT=-1
-CONFIG_ETRAX_SER3_CD_ON_PB_BIT=-1
-CONFIG_ETRAX_SER3_DSR_ON_PA_BIT=-1
-CONFIG_ETRAX_SER3_DSR_ON_PB_BIT=-1
-CONFIG_ETRAX_SER3_DTR_ON_PA_BIT=-1
-CONFIG_ETRAX_SER3_DTR_ON_PB_BIT=-1
-# CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED is not set
-CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE=y
-# CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_PA is not set
-# CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_PB is not set
-CONFIG_ETRAX_SER3_RI_ON_PA_BIT=-1
-CONFIG_ETRAX_SER3_RI_ON_PB_BIT=-1
-CONFIG_ETRAX_SERIAL=y
-# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
-# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
-CONFIG_ETRAX_SERIAL_PORT0=y
-# CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT is not set
-# CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN is not set
-CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN=y
-CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT=y
-# CONFIG_ETRAX_SERIAL_PORT1 is not set
-CONFIG_ETRAX_SERIAL_PORT2=y
-CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
-CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
-# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
-# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_PORT3=y
-CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT=y
-CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y
-# CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN is not set
-# CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-CONFIG_ETRAX_SYSFS_NODES=y
-CONFIG_ETRAX_USB_HOST=y
-CONFIG_ETRAX_USB_HOST_PORT1=y
-CONFIG_ETRAX_USB_HOST_PORT2=y
-# CONFIG_ETRAX_WATCHDOG is not set
-CONFIG_FAT_FS=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_IDE is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_PER_CPU=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_MSDOS_FS=y
-CONFIG_MTD=y
-CONFIG_MTDRAM_ABS_POS=0x0
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTDRAM_TOTAL_SIZE=0
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MTDRAM=y
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_SPLIT_ROOTFS=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_OOM_REBOOT is not set
-# CONFIG_OVERRIDE_SCHED_STARVATION_LIMIT is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCSI=y
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SMP is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_SYSTEM_PROFILER is not set
-CONFIG_UID16=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UNWIND_INFO is not set
-CONFIG_USB=y
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_SERIAL_IR is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_ZD1201=y
-CONFIG_VFAT_FS=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_ZD1211RW is not set