cns3xxx: add support for 3.3

Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73

17 files changed, 27541 insertions, 0 deletions

diff --git a/target/linux/cns3xxx/config-3.3 b/target/linux/cns3xxx/config-3.3
new file mode 100644
index 0000000000..29d0ac68ed
--- /dev/null
+++ b/target/linux/cns3xxx/config-3.3
@@ -0,0 +1,204 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ATA=y
+# CONFIG_ATA_SFF is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_SD=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CNS3XXX_ETH=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_CACHE_RWFO=y
+# CONFIG_DWC_DEBUG is not set
+# CONFIG_DWC_DEVICE_ONLY is not set
+# CONFIG_DWC_HOST_ONLY is not set
+CONFIG_DWC_OTG_MODE=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=m
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CNS3XXX=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_DOMAIN=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+CONFIG_LOCAL_TIMERS=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MACH_CNS3420VB=y
+CONFIG_MACH_GW2388=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MFD_T7L66XB is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_CNS3XXX=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MPCORE_WATCHDOG=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=2
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_PL310_ERRATA_769419=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RAID_ATTRS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSP=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_CNS3XXX=y
+CONFIG_SPI_MASTER=y
+# CONFIG_STAGING is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_CNS3XXX_EHCI=y
+CONFIG_USB_CNS3XXX_OHCI=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC_OTG=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/cns3xxx/patches-3.3/001-cns3xxx-clkdev-support.patch b/target/linux/cns3xxx/patches-3.3/001-cns3xxx-clkdev-support.patch
new file mode 100644
index 0000000000..bc8773ca42
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/001-cns3xxx-clkdev-support.patch
@@ -0,0 +1,69 @@
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -368,6 +368,7 @@ config ARCH_CNS3XXX
+ 	select CPU_V6K
+ 	select GENERIC_CLOCKEVENTS
+ 	select ARM_GIC
++	select CLKDEV_LOOKUP
+ 	select MIGHT_HAVE_CACHE_L2X0
+ 	select MIGHT_HAVE_PCI
+ 	select PCI_DOMAINS if PCI
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -9,8 +9,11 @@
+  */
+ 
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/interrupt.h>
+ #include <linux/clockchips.h>
++#include <linux/clk.h>
++#include <linux/clkdev.h>
+ #include <linux/io.h>
+ #include <asm/mach/map.h>
+ #include <asm/mach/time.h>
+@@ -20,6 +23,10 @@
+ #include <mach/cns3xxx.h>
+ #include "core.h"
+ 
++struct clk {
++	unsigned long	rate;
++};
++
+ static struct map_desc cns3xxx_io_desc[] __initdata = {
+ 	{
+ 		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
+@@ -287,3 +294,33 @@ void __init cns3xxx_l2x0_init(void)
+ }
+ 
+ #endif /* CONFIG_CACHE_L2X0 */
++
++int clk_enable(struct clk *clk)
++{
++	return 0;
++}
++EXPORT_SYMBOL(clk_enable);
++
++void clk_disable(struct clk *clk)
++{
++}
++EXPORT_SYMBOL(clk_disable);
++
++unsigned long clk_get_rate(struct clk *clk)
++{
++	return clk->rate;
++}
++EXPORT_SYMBOL(clk_get_rate);
++
++static struct clk_lookup cns3xxx_clocks[] = {
++	{
++		/* TODO */
++	},
++};
++
++int __init cns3xxx_clocks_init(void)
++{
++	clkdev_add_table(cns3xxx_clocks, ARRAY_SIZE(cns3xxx_clocks));
++	return 0;
++}
++postcore_initcall(cns3xxx_clocks_init);
diff --git a/target/linux/cns3xxx/patches-3.3/002-cns3xxx_wdt.patch b/target/linux/cns3xxx/patches-3.3/002-cns3xxx_wdt.patch
new file mode 100644
index 0000000000..d013334267
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/002-cns3xxx_wdt.patch
@@ -0,0 +1,69 @@
+1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog
+   since the CNS3xxx SOCs have ARM11 MPcore CPU.
+2. Enable mpcore_watchdog option as module to default configuration at
+   arch/arm/configs/cns3420vb_defconfig.
+
+Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com>
+
+---
+arch/arm/Kconfig                     |    1 +
+ arch/arm/configs/cns3420vb_defconfig |    2 ++
+ arch/arm/mach-cns3xxx/cns3420vb.c    |   22 ++++++++++++++++++++++
+ 3 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -372,6 +372,7 @@ config ARCH_CNS3XXX
+ 	select MIGHT_HAVE_CACHE_L2X0
+ 	select MIGHT_HAVE_PCI
+ 	select PCI_DOMAINS if PCI
++	select HAVE_ARM_TWD
+ 	help
+ 	  Support for Cavium Networks CNS3XXX platform.
+ 
+--- a/arch/arm/configs/cns3420vb_defconfig
++++ b/arch/arm/configs/cns3420vb_defconfig
+@@ -53,6 +53,8 @@ CONFIG_LEGACY_PTY_COUNT=16
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_HWMON is not set
+ # CONFIG_VGA_CONSOLE is not set
++CONFIG_WATCHDOG=y
++CONFIG_MPCORE_WATCHDOG=m
+ # CONFIG_HID_SUPPORT is not set
+ # CONFIG_USB_SUPPORT is not set
+ CONFIG_MMC=y
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -159,10 +159,32 @@ static struct platform_device cns3xxx_us
+ 	},
+ };
+ 
++/* Watchdog */
++static struct resource cns3xxx_watchdog_resources[] = {
++	[0] = {
++		.start = CNS3XXX_TC11MP_TWD_BASE,
++		.end   = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_LOCALWDOG,
++		.end   = IRQ_LOCALWDOG,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device cns3xxx_watchdog_device = {
++	.name		= "mpcore_wdt",
++	.id		= -1,
++	.num_resources	= ARRAY_SIZE(cns3xxx_watchdog_resources),
++	.resource	= cns3xxx_watchdog_resources,
++};
++
+ /*
+  * Initialization
+  */
+ static struct platform_device *cns3420_pdevs[] __initdata = {
++	&cns3xxx_watchdog_device,
+ 	&cns3420_nor_pdev,
+ 	&cns3xxx_usb_ehci_device,
+ 	&cns3xxx_usb_ohci_device,
diff --git a/target/linux/cns3xxx/patches-3.3/049-cns3xxx_smp_support.patch b/target/linux/cns3xxx/patches-3.3/049-cns3xxx_smp_support.patch
new file mode 100644
index 0000000000..e751eb8862
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/049-cns3xxx_smp_support.patch
@@ -0,0 +1,414 @@
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,3 +1,6 @@
+ obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
+ obj-$(CONFIG_PCI)			+= pcie.o
+ obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
++obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
++obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
++obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/headsmp.S
+@@ -0,0 +1,42 @@
++/*
++ *  linux/arch/arm/mach-cns3xxx/headsmp.S
++ *
++ *  Cloned from linux/arch/arm/plat-versatile/headsmp.S
++ *
++ *  Copyright (c) 2003 ARM Limited
++ *  All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++
++	__INIT
++
++/*
++ * CNS3XXX specific entry point for secondary CPUs.  This provides
++ * a "holding pen" into which all secondary cores are held until we're
++ * ready for them to initialise.
++ */
++ENTRY(cns3xxx_secondary_startup)
++	mrc	p15, 0, r0, c0, c0, 5
++	and	r0, r0, #15
++	adr	r4, 1f
++	ldmia	r4, {r5, r6}
++	sub	r4, r4, r5
++	add	r6, r6, r4
++pen:	ldr	r7, [r6]
++	cmp	r7, r0
++	bne	pen
++
++	/*
++	 * we've been released from the holding pen: secondary_stack
++	 * should now contain the SVC stack for this core
++	 */
++	b	secondary_startup
++
++	.align
++1:	.long	.
++	.long	pen_release
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/hotplug.c
+@@ -0,0 +1,130 @@
++/* linux arch/arm/mach-cns3xxx/hotplug.c
++ *
++ *  Cloned from linux/arch/arm/mach-realview/hotplug.c
++ *
++ *  Copyright (C) 2002 ARM Ltd.
++ *  All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/smp.h>
++
++#include <asm/cacheflush.h>
++
++extern volatile int pen_release;
++
++static inline void cpu_enter_lowpower(void)
++{
++	unsigned int v;
++
++	flush_cache_all();
++	asm volatile(
++	"	mcr	p15, 0, %1, c7, c5, 0\n"
++	"	mcr	p15, 0, %1, c7, c10, 4\n"
++	/*
++	 * Turn off coherency
++	 */
++	"	mrc	p15, 0, %0, c1, c0, 1\n"
++	"	bic	%0, %0, %3\n"
++	"	mcr	p15, 0, %0, c1, c0, 1\n"
++	"	mrc	p15, 0, %0, c1, c0, 0\n"
++	"	bic	%0, %0, %2\n"
++	"	mcr	p15, 0, %0, c1, c0, 0\n"
++	  : "=&r" (v)
++	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
++	  : "cc");
++}
++
++static inline void cpu_leave_lowpower(void)
++{
++	unsigned int v;
++
++	asm volatile(
++	"mrc	p15, 0, %0, c1, c0, 0\n"
++	"	orr	%0, %0, %1\n"
++	"	mcr	p15, 0, %0, c1, c0, 0\n"
++	"	mrc	p15, 0, %0, c1, c0, 1\n"
++	"	orr	%0, %0, %2\n"
++	"	mcr	p15, 0, %0, c1, c0, 1\n"
++	  : "=&r" (v)
++	  : "Ir" (CR_C), "Ir" (0x40)
++	  : "cc");
++}
++
++static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
++{
++	/*
++	 * there is no power-control hardware on this platform, so all
++	 * we can do is put the core into WFI; this is safe as the calling
++	 * code will have already disabled interrupts
++	 */
++	for (;;) {
++		/*
++		 * here's the WFI
++		 */
++		asm(".word	0xe320f003\n"
++		    :
++		    :
++		    : "memory", "cc");
++
++		if (pen_release == cpu) {
++			/*
++			 * OK, proper wakeup, we're done
++			 */
++			break;
++		}
++
++		/*
++		 * Getting here, means that we have come out of WFI without
++		 * having been woken up - this shouldn't happen
++		 *
++		 * Just note it happening - when we're woken, we can report
++		 * its occurrence.
++		 */
++		(*spurious)++;
++	}
++}
++
++int platform_cpu_kill(unsigned int cpu)
++{
++	return 1;
++}
++
++/*
++ * platform-specific code to shutdown a CPU
++ *
++ * Called with IRQs disabled
++ */
++void platform_cpu_die(unsigned int cpu)
++{
++	int spurious = 0;
++
++	/*
++	 * we're ready for shutdown now, so do it
++	 */
++	cpu_enter_lowpower();
++	platform_do_lowpower(cpu, &spurious);
++
++	/*
++	 * bring this CPU back into the world of cache
++	 * coherency, and then restore interrupts
++	 */
++	cpu_leave_lowpower();
++
++	if (spurious)
++		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
++}
++
++int platform_cpu_disable(unsigned int cpu)
++{
++	/*
++	 * we don't allow CPU 0 to be shutdown (it is still too special
++	 * e.g. clock tick interrupts)
++	 */
++	return cpu == 0 ? -EPERM : 0;
++}
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -3,6 +3,7 @@ menu "CNS3XXX platform type"
+ 
+ config MACH_CNS3420VB
+ 	bool "Support for CNS3420 Validation Board"
++	select HAVE_ARM_SCU if SMP
+ 	select MIGHT_HAVE_PCI
+ 	help
+ 	  Include support for the Cavium Networks CNS3420 MPCore Platform
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/localtimer.c
+@@ -0,0 +1,26 @@
++/* linux/arch/arm/mach-cns3xxx/localtimer.c
++ *
++ * Cloned from linux/arch/arm/mach-realview/localtimer.c
++ *
++ *  Copyright (C) 2002 ARM Ltd.
++ *  All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/clockchips.h>
++
++#include <asm/irq.h>
++#include <asm/localtimer.h>
++
++/*
++ * Setup the local clock events for a CPU.
++ */
++int __cpuinit local_timer_setup(struct clock_event_device *evt)
++{
++	evt->irq = IRQ_LOCALTIMER;
++	twd_timer_setup(evt);
++	return 0;
++}
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/platsmp.c
+@@ -0,0 +1,175 @@
++/* linux/arch/arm/mach-cns3xxx/platsmp.c
++ *
++ * Copyright 2011 Gateworks Corporation
++ *		   Chris Lang <clang@gateworks.com>
++ *
++ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
++ *
++ *  Copyright (C) 2002 ARM Ltd.
++ *  All Rights Reserved
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/jiffies.h>
++#include <linux/smp.h>
++#include <linux/io.h>
++
++#include <asm/cacheflush.h>
++#include <asm/hardware/gic.h>
++#include <asm/smp_scu.h>
++#include <asm/unified.h>
++
++#include <mach/cns3xxx.h>
++
++extern void cns3xxx_secondary_startup(void);
++
++/*
++ * control for which core is the next to come out of the secondary
++ * boot "holding pen"
++ */
++
++volatile int __cpuinitdata pen_release = -1;
++
++/*
++ * Write pen_release in a way that is guaranteed to be visible to all
++ * observers, irrespective of whether they're taking part in coherency
++ * or not.  This is necessary for the hotplug code to work reliably.
++ */
++static void write_pen_release(int val)
++{
++	pen_release = val;
++	smp_wmb();
++	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
++	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
++}
++
++static void __iomem *scu_base_addr(void)
++{
++	return (void __iomem *)(CNS3XXX_TC11MP_SCU_BASE_VIRT);
++}
++
++static DEFINE_SPINLOCK(boot_lock);
++
++void __cpuinit platform_secondary_init(unsigned int cpu)
++{
++	/*
++	 * if any interrupts are already enabled for the primary
++	 * core (e.g. timer irq), then they will not have been enabled
++	 * for us: do so
++	 */
++	gic_secondary_init(0);
++
++	/*
++	 * let the primary processor know we're out of the
++	 * pen, then head off into the C entry point
++	 */
++	write_pen_release(-1);
++
++	/*
++	 * Synchronise with the boot thread.
++	 */
++	spin_lock(&boot_lock);
++	spin_unlock(&boot_lock);
++}
++
++int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++	unsigned long timeout;
++
++	/*
++	 * Set synchronisation state between this boot processor
++	 * and the secondary one
++	 */
++	spin_lock(&boot_lock);
++
++	/*
++	 * The secondary processor is waiting to be released from
++	 * the holding pen - release it, then wait for it to flag
++	 * that it has been released by resetting pen_release.
++	 *
++	 * Note that "pen_release" is the hardware CPU ID, whereas
++	 * "cpu" is Linux's internal ID.
++	 */
++	write_pen_release(cpu);
++
++	/*
++	 * Send the secondary CPU a soft interrupt, thereby causing
++	 * the boot monitor to read the system wide flags register,
++	 * and branch to the address found there.
++	 */
++	gic_raise_softirq(cpumask_of(cpu), 1);
++
++	timeout = jiffies + (1 * HZ);
++	while (time_before(jiffies, timeout)) {
++		smp_rmb();
++		if (pen_release == -1)
++			break;
++
++		udelay(10);
++	}
++
++	/*
++	 * now the secondary core is starting up let it run its
++	 * calibrations, then wait for it to finish
++	 */
++	spin_unlock(&boot_lock);
++
++	return pen_release != -1 ? -ENOSYS : 0;
++}
++
++/*
++ * Initialise the CPU possible map early - this describes the CPUs
++ * which may be present or become present in the system.
++ */
++
++void __init smp_init_cpus(void)
++{
++	void __iomem *scu_base = scu_base_addr();
++	unsigned int i, ncores;
++
++	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
++
++	/* sanity check */
++	if (ncores > NR_CPUS) {
++		printk(KERN_WARNING
++		       "cns3xxx: no. of cores (%d) greater than configured "
++		       "maximum of %d - clipping\n",
++		       ncores, NR_CPUS);
++		ncores = NR_CPUS;
++	}
++
++	for (i = 0; i < ncores; i++)
++		set_cpu_possible(i, true);
++
++	set_smp_cross_call(gic_raise_softirq);
++}
++
++void __init platform_smp_prepare_cpus(unsigned int max_cpus)
++{
++	int i;
++
++	/*
++	 * Initialise the present map, which describes the set of CPUs
++	 * actually populated at the present time.
++	 */
++	for (i = 0; i < max_cpus; i++)
++		set_cpu_present(i, true);
++
++	scu_enable(scu_base_addr());
++
++	/*
++	 * Write the address of secondary startup into the
++	 * system-wide flags register. The boot monitor waits
++	 * until it receives a soft interrupt, and then the
++	 * secondary CPU branches to this address.
++	 */
++	__raw_writel(virt_to_phys(cns3xxx_secondary_startup),
++			(void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0600));
++}
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -373,6 +373,7 @@ config ARCH_CNS3XXX
+ 	select MIGHT_HAVE_PCI
+ 	select PCI_DOMAINS if PCI
+ 	select HAVE_ARM_TWD
++	select HAVE_SMP
+ 	help
+ 	  Support for Cavium Networks CNS3XXX platform.
+ 
diff --git a/target/linux/cns3xxx/patches-3.3/050-cns3xxx_i2c_controller.patch b/target/linux/cns3xxx/patches-3.3/050-cns3xxx_i2c_controller.patch
new file mode 100644
index 0000000000..1677cf3975
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/050-cns3xxx_i2c_controller.patch
@@ -0,0 +1,421 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -326,6 +326,18 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
+ 	help
+ 	  The unit of the TWI clock is kHz.
+ 
++config I2C_CNS3XXX
++	tristate "Cavium CNS3xxx I2C driver"
++	depends on ARCH_CNS3XXX
++	help
++	  Support for Cavium CNS3xxx I2C controller driver.
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called i2c-cns3xxx.
++
++	  Please note that this driver might be needed to bring up other
++	  devices such as Cavium CNS3xxx Ethernet.
++
+ config I2C_CPM
+ 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+ 	depends on (CPM1 || CPM2) && OF_I2C
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -83,6 +83,7 @@ obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor
+ obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
+ obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
++obj-$(CONFIG_I2C_CNS3XXX)	+= i2c-cns3xxx.o
+ obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+ 
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-cns3xxx.c
+@@ -0,0 +1,387 @@
++/*
++ * Cavium CNS3xxx I2C Host Controller
++ *
++ * Copyright 2010 Cavium Network
++ * Copyright 2011 Gateworks Corporation
++ *		  Chris Lang <clang@gateworks.com>
++ *
++ * This file is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License, Version 2, as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <asm/io.h>
++#include <linux/wait.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/slab.h>
++#include <mach/pm.h>
++#include <mach/cns3xxx.h>
++
++/*
++ * We need the memory map
++ */
++
++
++#define MISC_MEM_MAP_VALUE(reg_offset)	(*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
++#define MISC_IOCDB_CTRL				MISC_MEM_MAP_VALUE(0x020)
++
++#define I2C_MEM_MAP_ADDR(x)         (CNS3XXX_SSP_BASE_VIRT + x)
++#define I2C_MEM_MAP_VALUE(x)        (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
++
++#define I2C_CONTROLLER_REG                    I2C_MEM_MAP_VALUE(0x20)
++#define I2C_TIME_OUT_REG                      I2C_MEM_MAP_VALUE(0x24)
++#define I2C_SLAVE_ADDRESS_REG                 I2C_MEM_MAP_VALUE(0x28)
++#define I2C_WRITE_DATA_REG                    I2C_MEM_MAP_VALUE(0x2C)
++#define I2C_READ_DATA_REG                     I2C_MEM_MAP_VALUE(0x30)
++#define I2C_INTERRUPT_STATUS_REG              I2C_MEM_MAP_VALUE(0x34)
++#define I2C_INTERRUPT_ENABLE_REG              I2C_MEM_MAP_VALUE(0x38)
++#define I2C_TWI_OUT_DLY_REG			         			I2C_MEM_MAP_VALUE(0x3C)
++
++#define I2C_BUS_ERROR_FLAG     (0x1)
++#define I2C_ACTION_DONE_FLAG   (0x2)
++
++#define CNS3xxx_I2C_ENABLE()          (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
++#define CNS3xxx_I2C_DISABLE()         (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
++#define CNS3xxx_I2C_ENABLE_INTR()     (I2C_INTERRUPT_ENABLE_REG) |= 0x03
++#define CNS3xxx_I2C_DISABLE_INTR()    (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
++
++#define TWI_TIMEOUT         (10*HZ)
++#define I2C_100KHZ          100000
++#define I2C_200KHZ          200000
++#define I2C_300KHZ          300000
++#define I2C_400KHZ          400000
++
++#define CNS3xxx_I2C_CLK     I2C_100KHZ
++
++#define STATE_DONE		1
++#define STATE_ERROR		2
++
++struct cns3xxx_i2c {
++	void __iomem *base;
++	wait_queue_head_t wait;
++	struct i2c_adapter adap;
++	struct i2c_msg *msg;
++	int state;		/* see STATE_ */
++	int rd_wr_len;
++	u8 *buf;
++};
++
++static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
++{
++	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static int
++cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
++{
++	struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
++	int i, j;
++	u8 buf[1] = { 0 };
++
++	if (msg->len == 0) {
++		/*
++		 *	We are probably doing a probe for a device here,
++		 *	so set the length to one, and data to 0
++		 */
++		msg->len = 1;
++		i2c->buf = buf;
++	} else {
++		i2c->buf = msg->buf;
++	}
++
++	if (msg->flags & I2C_M_TEN) {
++		printk
++			("%s:%d: Presently the driver does not handle extended addressing\n",
++				__FUNCTION__, __LINE__);
++		return -EINVAL;
++	}
++	i2c->msg = msg;
++
++	for (i = 0; i < msg->len; i++) {
++		if (msg->len - i >= 4)
++			i2c->rd_wr_len = 3;
++		else
++			i2c->rd_wr_len = msg->len - i - 1;
++
++		// Set Data Width	and TWI_EN
++		I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
++
++		// Clear Write Reg
++		I2C_WRITE_DATA_REG = 0;
++
++		// Set the slave address
++		I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
++
++		// Are we Writing
++		if (!(msg->flags & I2C_M_RD)) {
++			I2C_CONTROLLER_REG |= (1 << 4);
++			if (i != 0) {
++				/*
++				 * We need to set the address in the first byte.
++				 * The base address is going to be in buf[0] and then
++				 * it needs to be incremented by i - 1.
++				 */
++				i2c->buf--;
++				*i2c->buf = buf[0] + i - 1;
++
++				if (i2c->rd_wr_len < 3) {
++					i += i2c->rd_wr_len;
++					i2c->rd_wr_len++;
++					I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
++				} else {
++					i += i2c->rd_wr_len - 1;
++				}
++			} else {
++				i += i2c->rd_wr_len;
++				buf[0] = *i2c->buf;
++			}
++			for (j = 0; j <= i2c->rd_wr_len; j++) {
++				I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
++			}
++		} else {
++			i += i2c->rd_wr_len;
++		}
++
++		// Start the Transfer
++		i2c->state = 0;		// Clear out the State
++		I2C_CONTROLLER_REG |= (1 << 6);
++
++		if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
++				(i2c->state == STATE_DONE), TWI_TIMEOUT)) {
++			if (i2c->state == STATE_ERROR) {
++				return -EIO;
++			}
++		} else {
++			return -ETIMEDOUT;
++		}
++	}
++	return 0;
++}
++
++static int
++cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
++{
++	int i;
++	int ret;
++	for (i = 0; i < num; i++)
++	{
++		ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
++		if (ret < 0) {
++			return ret;
++		}
++	}
++	return num;
++}
++
++
++static struct i2c_algorithm cns3xxx_i2c_algo = {
++	.master_xfer = cns3xxx_i2c_xfer,
++	.functionality = cns3xxx_i2c_func,
++};
++
++static struct i2c_adapter cns3xxx_i2c_adapter = {
++	.owner = THIS_MODULE,
++	.algo = &cns3xxx_i2c_algo,
++	.algo_data = NULL,
++	.nr = 0,
++	.name = "CNS3xxx I2C 0",
++	.retries = 5,
++};
++
++static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
++{
++        cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++        cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++        cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
++
++	/* Disable the I2C */
++	I2C_CONTROLLER_REG = 0;	/* Disabled the I2C */
++
++	//enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
++	//GPIOB[12]: SCL
++	//GPIOB[13]: SDA
++	(*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
++
++	MISC_IOCDB_CTRL &= ~0x300;
++	MISC_IOCDB_CTRL |= 0x300; //21mA...
++
++	/* Check the Reg Dump when testing */
++	I2C_TIME_OUT_REG =
++	    ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
++		1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
++	I2C_TWI_OUT_DLY_REG |= 0x3;
++
++	/* Enable The Interrupt */
++	CNS3xxx_I2C_ENABLE_INTR();
++
++	/* Clear Interrupt Status (0x2 | 0x1) */
++	I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
++
++	/* Enable the I2C Controller */
++	CNS3xxx_I2C_ENABLE();
++}
++
++static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
++{
++	struct cns3xxx_i2c *i2c = dev_id;
++	int i;
++	uint32_t stat = I2C_INTERRUPT_STATUS_REG;
++
++	/* Clear Interrupt */
++	I2C_INTERRUPT_STATUS_REG |= 0x1;
++
++	if (stat & I2C_BUS_ERROR_FLAG) {
++		i2c->state = STATE_ERROR;
++	} else {
++		if (i2c->msg->flags & I2C_M_RD) {
++			for (i = 0; i <= i2c->rd_wr_len; i++)
++			{
++				*i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
++			}
++		}
++		i2c->state = STATE_DONE;
++	}
++	wake_up(&i2c->wait);
++	return IRQ_HANDLED;
++}
++
++static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
++{
++	struct cns3xxx_i2c *i2c;
++	struct resource *res, *res2;
++	int ret;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
++		return -ENODEV;
++	}
++
++	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!res2) {
++		printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
++		return -ENODEV;
++	}
++
++	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
++	if (!i2c)
++		return -ENOMEM;
++
++	if (!request_mem_region(res->start, res->end - res->start + 1,
++				pdev->name)) {
++		dev_err(&pdev->dev, "Memory region busy\n");
++		ret = -EBUSY;
++		goto request_mem_failed;
++	}
++
++	i2c->base = ioremap(res->start, res->end - res->start + 1);
++	if (!i2c->base) {
++		dev_err(&pdev->dev, "Unable to map registers\n");
++		ret = -EIO;
++		goto map_failed;
++	}
++
++	cns3xxx_i2c_adapter_init(i2c);
++
++	init_waitqueue_head(&i2c->wait);
++	ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
++	if (ret) {
++		dev_err(&pdev->dev, "Cannot claim IRQ\n");
++		goto request_irq_failed;
++	}
++
++	platform_set_drvdata(pdev, i2c);
++	i2c->adap = cns3xxx_i2c_adapter;
++	i2c_set_adapdata(&i2c->adap, i2c);
++	i2c->adap.dev.parent = &pdev->dev;
++
++	/* add i2c adapter to i2c tree */
++	ret = i2c_add_numbered_adapter(&i2c->adap);
++	if (ret) {
++		dev_err(&pdev->dev, "Failed to add adapter\n");
++		goto add_adapter_failed;
++	}
++
++	return 0;
++
++      add_adapter_failed:
++	free_irq(res2->start, i2c);
++      request_irq_failed:
++	iounmap(i2c->base);
++      map_failed:
++	release_mem_region(res->start, res->end - res->start + 1);
++      request_mem_failed:
++	kfree(i2c);
++
++	return ret;
++}
++
++static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
++{
++	struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
++	struct resource *res;
++
++	/* disable i2c logic */
++	CNS3xxx_I2C_DISABLE_INTR();
++	CNS3xxx_I2C_DISABLE();
++	/* remove adapter & data */
++	i2c_del_adapter(&i2c->adap);
++	platform_set_drvdata(pdev, NULL);
++
++	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (res)
++		free_irq(res->start, i2c);
++
++	iounmap(i2c->base);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (res)
++		release_mem_region(res->start, res->end - res->start + 1);
++
++	kfree(i2c);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++#warning "CONFIG_PM defined: suspend and resume not implemented"
++#define cns3xxx_i2c_suspend	NULL
++#define cns3xxx_i2c_resume	NULL
++#else
++#define cns3xxx_i2c_suspend	NULL
++#define cns3xxx_i2c_resume	NULL
++#endif
++
++static struct platform_driver cns3xxx_i2c_driver = {
++	.probe = cns3xxx_i2c_probe,
++	.remove = cns3xxx_i2c_remove,
++	.suspend = cns3xxx_i2c_suspend,
++	.resume = cns3xxx_i2c_resume,
++	.driver = {
++		.owner = THIS_MODULE,
++		.name = "cns3xxx-i2c",
++	},
++};
++
++static int __init cns3xxx_i2c_init(void)
++{
++	return platform_driver_register(&cns3xxx_i2c_driver);
++}
++
++static void __exit cns3xxx_i2c_exit(void)
++{
++	platform_driver_unregister(&cns3xxx_i2c_driver);
++}
++
++module_init(cns3xxx_i2c_init);
++module_exit(cns3xxx_i2c_exit);
++
++MODULE_AUTHOR("Cavium Networks");
++MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/cns3xxx/patches-3.3/051-cns3xxx_gigabit.patch b/target/linux/cns3xxx/patches-3.3/051-cns3xxx_gigabit.patch
new file mode 100644
index 0000000000..72306d946f
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/051-cns3xxx_gigabit.patch
@@ -0,0 +1,1357 @@
+--- /dev/null
++++ b/drivers/net/ethernet/cavium/cns3xxx_eth.c
+@@ -0,0 +1,1270 @@
++/*
++ * Cavium CNS3xxx Gigabit driver for Linux
++ *
++ * Copyright 2011 Gateworks Corporation
++ *		  Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/etherdevice.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/skbuff.h>
++#include <mach/irqs.h>
++#include <mach/platform.h>
++
++#define DRV_NAME "cns3xxx_eth"
++
++#define RX_DESCS 512
++#define TX_DESCS 512
++#define SKB_DMA_REALIGN ((PAGE_SIZE - NET_SKB_PAD) % SMP_CACHE_BYTES)
++
++#define RX_POOL_ALLOC_SIZE (sizeof(struct rx_desc) * RX_DESCS)
++#define TX_POOL_ALLOC_SIZE (sizeof(struct tx_desc) * TX_DESCS)
++#define REGS_SIZE 336
++#define MAX_MRU	9500
++
++#define NAPI_WEIGHT 64
++
++/* MDIO Defines */
++#define MDIO_CMD_COMPLETE 0x00008000
++#define MDIO_WRITE_COMMAND 0x00002000
++#define MDIO_READ_COMMAND 0x00004000
++#define MDIO_REG_OFFSET 8
++#define MDIO_VALUE_OFFSET 16
++
++/* Descritor Defines */
++#define END_OF_RING 0x40000000
++#define FIRST_SEGMENT 0x20000000
++#define LAST_SEGMENT 0x10000000
++#define FORCE_ROUTE 0x04000000
++#define IP_CHECKSUM 0x00040000
++#define UDP_CHECKSUM 0x00020000
++#define TCP_CHECKSUM 0x00010000
++
++/* Port Config Defines */
++#define PORT_DISABLE 0x00040000
++#define PROMISC_OFFSET 29
++
++/* Global Config Defines */
++#define UNKNOWN_VLAN_TO_CPU 0x02000000
++#define ACCEPT_CRC_PACKET 0x00200000
++#define CRC_STRIPPING 0x00100000
++
++/* VLAN Config Defines */
++#define NIC_MODE 0x00008000
++#define VLAN_UNAWARE 0x00000001
++
++/* DMA AUTO Poll Defines */
++#define TS_POLL_EN 0x00000020
++#define TS_SUSPEND 0x00000010
++#define FS_POLL_EN 0x00000002
++#define FS_SUSPEND 0x00000001
++
++/* DMA Ring Control Defines */
++#define QUEUE_THRESHOLD 0x000000f0
++#define CLR_FS_STATE 0x80000000
++
++struct tx_desc
++{
++	u32 sdp; /* segment data pointer */
++
++	union {
++		struct {
++			u32 sdl:16; /* segment data length */
++			u32 tco:1;
++			u32 uco:1;
++			u32 ico:1;
++			u32 rsv_1:3; /* reserve */
++			u32 pri:3;
++			u32 fp:1; /* force priority */
++			u32 fr:1;
++			u32 interrupt:1;
++			u32 lsd:1;
++			u32 fsd:1;
++			u32 eor:1;
++			u32 cown:1;
++		};
++		u32 config0;
++	};
++
++	union {
++		struct {
++			u32 ctv:1;
++			u32 stv:1;
++			u32 sid:4;
++			u32 inss:1;
++			u32 dels:1;
++			u32 rsv_2:9;
++			u32 pmap:5;
++			u32 mark:3;
++			u32 ewan:1;
++			u32 fewan:1;
++			u32 rsv_3:5;
++		};
++		u32 config1;
++	};
++
++	union {
++		struct {
++			u32 c_vid:12;
++			u32 c_cfs:1;
++			u32 c_pri:3;
++			u32 s_vid:12;
++			u32 s_dei:1;
++			u32 s_pri:3;
++		};
++		u32 config2;
++	};
++
++	u8 alignment[16]; /* for 32 byte */
++};
++
++struct rx_desc
++{
++	u32 sdp; /* segment data pointer */
++
++	union {
++		struct {
++			u32 sdl:16; /* segment data length */
++			u32 l4f:1;
++			u32 ipf:1;
++			u32 prot:4;
++			u32 hr:6;
++			u32 lsd:1;
++			u32 fsd:1;
++			u32 eor:1;
++			u32 cown:1;
++		};
++		u32 config0;
++	};
++
++	union {
++		struct {
++			u32 ctv:1;
++			u32 stv:1;
++			u32 unv:1;
++			u32 iwan:1;
++			u32 exdv:1;
++			u32 e_wan:1;
++			u32 rsv_1:2;
++			u32 sp:3;
++			u32 crc_err:1;
++			u32 un_eth:1;
++			u32 tc:2;
++			u32 rsv_2:1;
++			u32 ip_offset:5;
++			u32 rsv_3:11;
++		};
++		u32 config1;
++	};
++
++	union {
++		struct {
++			u32 c_vid:12;
++			u32 c_cfs:1;
++			u32 c_pri:3;
++			u32 s_vid:12;
++			u32 s_dei:1;
++			u32 s_pri:3;
++		};
++		u32 config2;
++	};
++
++	u8 alignment[16]; /* for 32 byte alignment */
++};
++
++struct switch_regs {
++	u32 phy_control;
++	u32 phy_auto_addr;
++	u32 mac_glob_cfg;
++	u32 mac_cfg[4];
++	u32 mac_pri_ctrl[5], __res;
++	u32 etype[2];
++	u32 udp_range[4];
++	u32 prio_etype_udp;
++	u32 prio_ipdscp[8];
++	u32 tc_ctrl;
++	u32 rate_ctrl;
++	u32 fc_glob_thrs;
++	u32 fc_port_thrs;
++	u32 mc_fc_glob_thrs;
++	u32 dc_glob_thrs;
++	u32 arl_vlan_cmd;
++	u32 arl_ctrl[3];
++	u32 vlan_cfg;
++	u32 pvid[2];
++	u32 vlan_ctrl[3];
++	u32 session_id[8];
++	u32 intr_stat;
++	u32 intr_mask;
++	u32 sram_test;
++	u32 mem_queue;
++	u32 farl_ctrl;
++	u32 fc_input_thrs, __res1[2];
++	u32 clk_skew_ctrl;
++	u32 mac_glob_cfg_ext, __res2[2];
++	u32 dma_ring_ctrl;
++	u32 dma_auto_poll_cfg;
++	u32 delay_intr_cfg, __res3;
++	u32 ts_dma_ctrl0;
++	u32 ts_desc_ptr0;
++	u32 ts_desc_base_addr0, __res4;
++	u32 fs_dma_ctrl0;
++	u32 fs_desc_ptr0;
++	u32 fs_desc_base_addr0, __res5;
++	u32 ts_dma_ctrl1;
++	u32 ts_desc_ptr1;
++	u32 ts_desc_base_addr1, __res6;
++	u32 fs_dma_ctrl1;
++	u32 fs_desc_ptr1;
++	u32 fs_desc_base_addr1;
++};
++
++struct _tx_ring {
++	struct tx_desc *desc;
++	dma_addr_t phys_addr;
++	struct tx_desc *cur_addr;
++	struct sk_buff *buff_tab[TX_DESCS];
++	u32 free_index;
++	u32 count_index;
++	u32 cur_index;
++	int num_used;
++	int num_count;
++};
++
++struct _rx_ring {
++	struct rx_desc *desc;
++	dma_addr_t phys_addr;
++	struct rx_desc *cur_addr;
++	struct sk_buff *buff_tab[RX_DESCS];
++	u32 cur_index;
++	u32 alloc_index;
++	int alloc_count;
++};
++
++struct sw {
++	struct resource *mem_res;
++	struct switch_regs __iomem *regs;
++	struct napi_struct napi;
++	struct cns3xxx_plat_info *plat;
++	struct _tx_ring *tx_ring;
++	struct _rx_ring *rx_ring;
++	u32 mtu;
++};
++
++struct port {
++	struct net_device *netdev;
++	struct phy_device *phydev;
++	struct sw *sw;
++	int id;			/* logical port ID */
++	int speed, duplex;
++	u32 mtu;
++};
++
++static spinlock_t mdio_lock;
++static spinlock_t tx_lock;
++static spinlock_t stat_lock;
++static struct switch_regs __iomem *mdio_regs; /* mdio command and status only */
++struct mii_bus *mdio_bus;
++static int ports_open;
++static struct port *switch_port_tab[3];
++static struct dma_pool *rx_dma_pool;
++static struct dma_pool *tx_dma_pool;
++struct net_device *napi_dev;
++
++static int cns3xxx_mdio_cmd(struct mii_bus *bus, int phy_id, int location,
++			   int write, u16 cmd)
++{
++	int cycles = 0;
++	u32 temp = 0;
++
++	temp = __raw_readl(&mdio_regs->phy_control);
++	temp |= MDIO_CMD_COMPLETE;
++	__raw_writel(temp, &mdio_regs->phy_control);
++	udelay(10);
++
++	if (write) {
++		temp = (cmd << MDIO_VALUE_OFFSET);
++		temp |= MDIO_WRITE_COMMAND;
++	} else {
++		temp = MDIO_READ_COMMAND;
++	}
++	temp |= ((location & 0x1f) << MDIO_REG_OFFSET);
++	temp |= (phy_id & 0x1f);
++
++	__raw_writel(temp, &mdio_regs->phy_control);
++
++	while (((__raw_readl(&mdio_regs->phy_control) & MDIO_CMD_COMPLETE) == 0)
++			&& cycles < 5000) {
++		udelay(1);
++		cycles++;
++	}
++
++	if (cycles == 5000) {
++		printk(KERN_ERR "%s #%i: MII transaction failed\n", bus->name,
++		       phy_id);
++		return -1;
++	}
++
++	temp = __raw_readl(&mdio_regs->phy_control);
++	temp |= MDIO_CMD_COMPLETE;
++	__raw_writel(temp, &mdio_regs->phy_control);
++
++	if (write)
++		return 0;
++
++	return ((temp >> MDIO_VALUE_OFFSET) & 0xFFFF);
++}
++
++static int cns3xxx_mdio_read(struct mii_bus *bus, int phy_id, int location)
++{
++	unsigned long flags;
++	int ret;
++
++	spin_lock_irqsave(&mdio_lock, flags);
++	ret = cns3xxx_mdio_cmd(bus, phy_id, location, 0, 0);
++	spin_unlock_irqrestore(&mdio_lock, flags);
++	return ret;
++}
++
++static int cns3xxx_mdio_write(struct mii_bus *bus, int phy_id, int location,
++			     u16 val)
++{
++	unsigned long flags;
++	int ret;
++
++	spin_lock_irqsave(&mdio_lock, flags);
++	ret = cns3xxx_mdio_cmd(bus, phy_id, location, 1, val);
++	spin_unlock_irqrestore(&mdio_lock, flags);
++	return ret;
++}
++
++static int cns3xxx_mdio_register(void)
++{
++	int err;
++
++	if (!(mdio_bus = mdiobus_alloc()))
++		return -ENOMEM;
++
++	mdio_regs = (struct switch_regs __iomem *)CNS3XXX_SWITCH_BASE_VIRT;
++
++	spin_lock_init(&mdio_lock);
++	mdio_bus->name = "CNS3xxx MII Bus";
++	mdio_bus->read = &cns3xxx_mdio_read;
++	mdio_bus->write = &cns3xxx_mdio_write;
++	strcpy(mdio_bus->id, "0");
++
++	if ((err = mdiobus_register(mdio_bus)))
++		mdiobus_free(mdio_bus);
++	return err;
++}
++
++static void cns3xxx_mdio_remove(void)
++{
++	mdiobus_unregister(mdio_bus);
++	mdiobus_free(mdio_bus);
++}
++
++static void cns3xxx_adjust_link(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct phy_device *phydev = port->phydev;
++
++	if (!phydev->link) {
++		if (port->speed) {
++			port->speed = 0;
++			printk(KERN_INFO "%s: link down\n", dev->name);
++		}
++		return;
++	}
++
++	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
++		return;
++
++	port->speed = phydev->speed;
++	port->duplex = phydev->duplex;
++
++	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
++	       dev->name, port->speed, port->duplex ? "full" : "half");
++}
++
++irqreturn_t eth_rx_irq(int irq, void *pdev)
++{
++	struct net_device *dev = pdev;
++	struct sw *sw = netdev_priv(dev);
++	if (likely(napi_schedule_prep(&sw->napi))) {
++		disable_irq_nosync(IRQ_CNS3XXX_SW_R0RXC);
++		__napi_schedule(&sw->napi);
++	}
++	return (IRQ_HANDLED);
++}
++
++static void cns3xxx_alloc_rx_buf(struct sw *sw, int received)
++{
++	struct _rx_ring *rx_ring = sw->rx_ring;
++	unsigned int i = rx_ring->alloc_index;
++	struct rx_desc *desc;
++	struct sk_buff *skb;
++	u32 mtu = sw->mtu;
++
++	rx_ring->alloc_count += received;
++
++	for (received = rx_ring->alloc_count; received > 0; received--) {
++		desc = &(rx_ring)->desc[i];
++
++		if ((skb = dev_alloc_skb(mtu))) {
++			if (SKB_DMA_REALIGN)
++				skb_reserve(skb, SKB_DMA_REALIGN);
++			skb_reserve(skb, NET_IP_ALIGN);
++			desc->sdp = dma_map_single(NULL, skb->data,
++				    mtu, DMA_FROM_DEVICE);
++			if (dma_mapping_error(NULL, desc->sdp)) {
++				dev_kfree_skb(skb);
++				/* Failed to map, better luck next time */
++				goto out;;
++			}
++		} else {
++			/* Failed to allocate skb, try again next time */
++			goto out;
++		}
++
++		/* put the new buffer on RX-free queue */
++		rx_ring->buff_tab[i] = skb;
++
++		if (++i == RX_DESCS) {
++			i = 0;
++			desc->config0 = END_OF_RING | FIRST_SEGMENT |
++					LAST_SEGMENT | mtu;
++		} else {
++			desc->config0 = FIRST_SEGMENT | LAST_SEGMENT | mtu;
++		}
++	}
++out:
++	rx_ring->alloc_count = received;
++	rx_ring->alloc_index = i;
++}
++
++static void update_tx_stats(struct sw *sw)
++{
++	struct _tx_ring *tx_ring = sw->tx_ring;
++	struct tx_desc *desc;
++	struct tx_desc *next_desc;
++	struct sk_buff *skb;
++	int i;
++	int index;
++	int num_count;
++
++	spin_lock_bh(&stat_lock);
++
++	num_count = tx_ring->num_count;
++
++	if (!num_count) {
++		spin_unlock_bh(&stat_lock);
++		return;
++	}
++
++	index = tx_ring->count_index;
++	desc = &(tx_ring)->desc[index];
++	for (i = 0; i < num_count; i++) {
++		skb = tx_ring->buff_tab[index];
++		if (desc->cown) {
++			tx_ring->buff_tab[index] = 0;
++			if (unlikely(++index == TX_DESCS)) index = 0;
++			next_desc = &(tx_ring)->desc[index];
++			prefetch(next_desc + 4);
++			if (likely(skb)) {
++				skb->dev->stats.tx_packets++;
++				skb->dev->stats.tx_bytes += skb->len;
++				dev_kfree_skb_any(skb);
++			}
++			desc = next_desc;
++		} else {
++			break;
++		}
++	}
++	tx_ring->num_count -= i;
++	tx_ring->count_index = index;
++
++	spin_unlock_bh(&stat_lock);
++}
++
++static void clear_tx_desc(struct sw *sw)
++{
++	struct _tx_ring *tx_ring = sw->tx_ring;
++	struct tx_desc *desc;
++	struct tx_desc *next_desc;
++	int i;
++	int index;
++	int num_used = tx_ring->num_used - tx_ring->num_count;
++
++	if (num_used < (TX_DESCS >> 1))
++		return;
++
++	index = tx_ring->free_index;
++	desc = &(tx_ring)->desc[index];
++	for (i = 0; i < num_used; i++) {
++		if (desc->cown) {
++			if (unlikely(++index == TX_DESCS)) index = 0;
++			next_desc = &(tx_ring)->desc[index];
++			prefetch(next_desc);
++			prefetch(next_desc + 4);
++			if (likely(desc->sdp))
++				dma_unmap_single(NULL, desc->sdp,
++					desc->sdl, DMA_TO_DEVICE);
++			desc = next_desc;
++		} else {
++			break;
++		}
++	}
++	tx_ring->free_index = index;
++	tx_ring->num_used -= i;
++}
++
++static int eth_poll(struct napi_struct *napi, int budget)
++{
++	struct sw *sw = container_of(napi, struct sw, napi);
++	struct net_device *dev;
++	struct _rx_ring *rx_ring = sw->rx_ring;
++	int received = 0;
++	unsigned int length;
++	unsigned int i = rx_ring->cur_index;
++	struct rx_desc *next_desc;
++	struct rx_desc *desc = &(rx_ring)->desc[i];
++	int port_id;
++
++	while (desc->cown) {
++		struct sk_buff *skb;
++
++		if (received >= budget)
++			break;
++
++		skb = rx_ring->buff_tab[i];
++
++		if (++i == RX_DESCS) i = 0;
++		next_desc = &(rx_ring)->desc[i];
++		prefetch(next_desc);
++
++		port_id = desc->sp;
++		if (port_id == 4)
++			dev = switch_port_tab[2]->netdev;
++		else
++			dev = switch_port_tab[port_id]->netdev;
++
++		length = desc->sdl;
++		/* process received frame */
++		dma_unmap_single(&dev->dev, desc->sdp,
++				 length, DMA_FROM_DEVICE);
++
++		skb_put(skb, length);
++
++		skb->dev = dev;
++		skb->protocol = eth_type_trans(skb, dev);
++
++		dev->stats.rx_packets++;
++		dev->stats.rx_bytes += length;
++
++		switch (desc->prot) {
++			case 1:
++			case 2:
++			case 5:
++			case 6:
++			case 13:
++			case 14:
++				if (desc->l4f)
++					skb->ip_summed = CHECKSUM_NONE;
++				else
++					skb->ip_summed = CHECKSUM_UNNECESSARY;
++			break;
++			default:
++				skb->ip_summed = CHECKSUM_NONE;
++			break;
++		}
++
++		napi_gro_receive(napi, skb);
++
++		received++;
++		desc = next_desc;
++	}
++
++	cns3xxx_alloc_rx_buf(sw, received);
++	rx_ring->cur_index = i;
++
++	if (received != budget) {
++		napi_complete(napi);
++		enable_irq(IRQ_CNS3XXX_SW_R0RXC);
++	}
++
++	return received;
++}
++
++static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct sw *sw = port->sw;
++	struct _tx_ring *tx_ring = sw->tx_ring;
++	struct tx_desc *tx_desc;
++	int index;
++	int len = skb->len;
++	char pmap = (1 << port->id);
++
++	if (pmap == 8)
++		pmap = (1 << 4);
++
++	if (unlikely(len > sw->mtu)) {
++		dev_kfree_skb(skb);
++		dev->stats.tx_errors++;
++		return NETDEV_TX_OK;
++	}
++
++	update_tx_stats(sw);
++
++	spin_lock_bh(&tx_lock);
++
++	clear_tx_desc(sw);
++
++	if (unlikely(tx_ring->num_used == TX_DESCS)) {
++		spin_unlock_bh(&tx_lock);
++		return NETDEV_TX_BUSY;
++	}
++
++	index = tx_ring->cur_index;
++
++	if (unlikely(++tx_ring->cur_index == TX_DESCS))
++		tx_ring->cur_index = 0;
++
++	tx_ring->num_used++;
++	tx_ring->num_count++;
++
++	spin_unlock_bh(&tx_lock);
++
++	tx_desc = &(tx_ring)->desc[index];
++
++	tx_desc->sdp = dma_map_single(NULL, skb->data, len,
++				      DMA_TO_DEVICE);
++
++	if (dma_mapping_error(NULL, tx_desc->sdp)) {
++		dev_kfree_skb(skb);
++		dev->stats.tx_errors++;
++		return NETDEV_TX_OK;
++	}
++
++	tx_desc->pmap = pmap;
++	tx_ring->buff_tab[index] = skb;
++
++	if (index == TX_DESCS - 1) {
++		tx_desc->config0 = END_OF_RING | FIRST_SEGMENT | LAST_SEGMENT |
++				   FORCE_ROUTE | IP_CHECKSUM | UDP_CHECKSUM |
++				   TCP_CHECKSUM | len;
++	} else {
++		tx_desc->config0 = FIRST_SEGMENT | LAST_SEGMENT |
++				   FORCE_ROUTE | IP_CHECKSUM | UDP_CHECKSUM |
++				   TCP_CHECKSUM | len;
++	}
++
++	return NETDEV_TX_OK;
++}
++
++static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
++{
++	struct port *port = netdev_priv(dev);
++
++	if (!netif_running(dev))
++		return -EINVAL;
++	return phy_mii_ioctl(port->phydev, req, cmd);
++}
++
++/* ethtool support */
++
++static void cns3xxx_get_drvinfo(struct net_device *dev,
++			       struct ethtool_drvinfo *info)
++{
++	strcpy(info->driver, DRV_NAME);
++	strcpy(info->bus_info, "internal");
++}
++
++static int cns3xxx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++	struct port *port = netdev_priv(dev);
++	return phy_ethtool_gset(port->phydev, cmd);
++}
++
++static int cns3xxx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++	struct port *port = netdev_priv(dev);
++	return phy_ethtool_sset(port->phydev, cmd);
++}
++
++static int cns3xxx_nway_reset(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	return phy_start_aneg(port->phydev);
++}
++
++static struct ethtool_ops cns3xxx_ethtool_ops = {
++	.get_drvinfo = cns3xxx_get_drvinfo,
++	.get_settings = cns3xxx_get_settings,
++	.set_settings = cns3xxx_set_settings,
++	.nway_reset = cns3xxx_nway_reset,
++	.get_link = ethtool_op_get_link,
++};
++
++
++static int init_rings(struct sw *sw)
++{
++	int i;
++	struct _rx_ring *rx_ring = sw->rx_ring;
++	struct _tx_ring *tx_ring = sw->tx_ring;
++
++	__raw_writel(0, &sw->regs->fs_dma_ctrl0);
++	__raw_writel(TS_SUSPEND | FS_SUSPEND, &sw->regs->dma_auto_poll_cfg);
++	__raw_writel(QUEUE_THRESHOLD, &sw->regs->dma_ring_ctrl);
++	__raw_writel(CLR_FS_STATE | QUEUE_THRESHOLD, &sw->regs->dma_ring_ctrl);
++
++	__raw_writel(QUEUE_THRESHOLD, &sw->regs->dma_ring_ctrl);
++
++	if (!(rx_dma_pool = dma_pool_create(DRV_NAME, NULL,
++					    RX_POOL_ALLOC_SIZE, 32, 0)))
++		return -ENOMEM;
++
++	if (!(rx_ring->desc = dma_pool_alloc(rx_dma_pool, GFP_KERNEL,
++					      &rx_ring->phys_addr)))
++		return -ENOMEM;
++	memset(rx_ring->desc, 0, RX_POOL_ALLOC_SIZE);
++
++	/* Setup RX buffers */
++	for (i = 0; i < RX_DESCS; i++) {
++		struct rx_desc *desc = &(rx_ring)->desc[i];
++		struct sk_buff *skb;
++		if (!(skb = dev_alloc_skb(sw->mtu)))
++			return -ENOMEM;
++		if (SKB_DMA_REALIGN)
++			skb_reserve(skb, SKB_DMA_REALIGN);
++		skb_reserve(skb, NET_IP_ALIGN);
++		desc->sdl = sw->mtu;
++		if (i == (RX_DESCS - 1))
++			desc->eor = 1;
++		desc->fsd = 1;
++		desc->lsd = 1;
++
++		desc->sdp = dma_map_single(NULL, skb->data,
++					    sw->mtu, DMA_FROM_DEVICE);
++		if (dma_mapping_error(NULL, desc->sdp)) {
++			return -EIO;
++		}
++		rx_ring->buff_tab[i] = skb;
++		desc->cown = 0;
++	}
++	__raw_writel(rx_ring->phys_addr, &sw->regs->fs_desc_ptr0);
++	__raw_writel(rx_ring->phys_addr, &sw->regs->fs_desc_base_addr0);
++
++	if (!(tx_dma_pool = dma_pool_create(DRV_NAME, NULL,
++					    TX_POOL_ALLOC_SIZE, 32, 0)))
++		return -ENOMEM;
++
++	if (!(tx_ring->desc = dma_pool_alloc(tx_dma_pool, GFP_KERNEL,
++					      &tx_ring->phys_addr)))
++		return -ENOMEM;
++	memset(tx_ring->desc, 0, TX_POOL_ALLOC_SIZE);
++
++	/* Setup TX buffers */
++	for (i = 0; i < TX_DESCS; i++) {
++		struct tx_desc *desc = &(tx_ring)->desc[i];
++		tx_ring->buff_tab[i] = 0;
++
++		if (i == (TX_DESCS - 1))
++			desc->eor = 1;
++		desc->cown = 1;
++	}
++	__raw_writel(tx_ring->phys_addr, &sw->regs->ts_desc_ptr0);
++	__raw_writel(tx_ring->phys_addr, &sw->regs->ts_desc_base_addr0);
++
++	return 0;
++}
++
++static void destroy_rings(struct sw *sw)
++{
++	int i;
++	if (sw->rx_ring->desc) {
++		for (i = 0; i < RX_DESCS; i++) {
++			struct _rx_ring *rx_ring = sw->rx_ring;
++			struct rx_desc *desc = &(rx_ring)->desc[i];
++			struct sk_buff *skb = sw->rx_ring->buff_tab[i];
++			if (skb) {
++				dma_unmap_single(NULL,
++						 desc->sdp,
++						 sw->mtu, DMA_FROM_DEVICE);
++				dev_kfree_skb(skb);
++			}
++		}
++		dma_pool_free(rx_dma_pool, sw->rx_ring->desc, sw->rx_ring->phys_addr);
++		dma_pool_destroy(rx_dma_pool);
++		rx_dma_pool = 0;
++		sw->rx_ring->desc = 0;
++	}
++	if (sw->tx_ring->desc) {
++		for (i = 0; i < TX_DESCS; i++) {
++			struct _tx_ring *tx_ring = sw->tx_ring;
++			struct tx_desc *desc = &(tx_ring)->desc[i];
++			struct sk_buff *skb = sw->tx_ring->buff_tab[i];
++			if (skb) {
++				dma_unmap_single(NULL, desc->sdp,
++					skb->len, DMA_TO_DEVICE);
++				dev_kfree_skb(skb);
++			}
++		}
++		dma_pool_free(tx_dma_pool, sw->tx_ring->desc, sw->tx_ring->phys_addr);
++		dma_pool_destroy(tx_dma_pool);
++		tx_dma_pool = 0;
++		sw->tx_ring->desc = 0;
++	}
++}
++
++static int eth_open(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct sw *sw = port->sw;
++	u32 temp;
++
++	port->speed = 0;	/* force "link up" message */
++	phy_start(port->phydev);
++
++	netif_start_queue(dev);
++
++	if (!ports_open) {
++		request_irq(IRQ_CNS3XXX_SW_R0RXC, eth_rx_irq, IRQF_SHARED, "gig_switch", napi_dev);
++		napi_enable(&sw->napi);
++		netif_start_queue(napi_dev);
++		//enable_irq(IRQ_CNS3XXX_SW_R0RXC);
++
++		temp = __raw_readl(&sw->regs->mac_cfg[2]);
++		temp &= ~(PORT_DISABLE);
++		__raw_writel(temp, &sw->regs->mac_cfg[2]);
++
++		temp = __raw_readl(&sw->regs->dma_auto_poll_cfg);
++		temp &= ~(TS_SUSPEND | FS_SUSPEND);
++		__raw_writel(temp, &sw->regs->dma_auto_poll_cfg);
++
++		__raw_writel((TS_POLL_EN | FS_POLL_EN), &sw->regs->dma_auto_poll_cfg);
++	}
++	temp = __raw_readl(&sw->regs->mac_cfg[port->id]);
++	temp &= ~(PORT_DISABLE);
++	__raw_writel(temp, &sw->regs->mac_cfg[port->id]);
++
++	ports_open++;
++	netif_carrier_on(dev);
++
++	return 0;
++}
++
++static int eth_close(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct sw *sw = port->sw;
++	u32 temp;
++
++	ports_open--;
++
++	temp = __raw_readl(&sw->regs->mac_cfg[port->id]);
++	temp |= (PORT_DISABLE);
++	__raw_writel(temp, &sw->regs->mac_cfg[port->id]);
++
++	netif_stop_queue(dev);
++
++	phy_stop(port->phydev);
++
++	if (!ports_open) {
++		disable_irq(IRQ_CNS3XXX_SW_R0RXC);
++		free_irq(IRQ_CNS3XXX_SW_R0RXC, napi_dev);
++		napi_disable(&sw->napi);
++		netif_stop_queue(napi_dev);
++		temp = __raw_readl(&sw->regs->mac_cfg[2]);
++		temp |= (PORT_DISABLE);
++		__raw_writel(temp, &sw->regs->mac_cfg[2]);
++
++		__raw_writel(TS_SUSPEND | FS_SUSPEND,
++			     &sw->regs->dma_auto_poll_cfg);
++	}
++
++	netif_carrier_off(dev);
++	return 0;
++}
++
++static void eth_rx_mode(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++	struct sw *sw = port->sw;
++	u32 temp;
++
++	temp = __raw_readl(&sw->regs->mac_glob_cfg);
++
++	if (dev->flags & IFF_PROMISC) {
++		if (port->id == 3)
++			temp |= ((1 << 2) << PROMISC_OFFSET);
++		else
++			temp |= ((1 << port->id) << PROMISC_OFFSET);
++	} else {
++		if (port->id == 3)
++			temp &= ~((1 << 2) << PROMISC_OFFSET);
++		else
++			temp &= ~((1 << port->id) << PROMISC_OFFSET);
++	}
++	__raw_writel(temp, &sw->regs->mac_glob_cfg);
++}
++
++static int eth_set_mac(struct net_device *netdev, void *p)
++{
++	struct port *port = netdev_priv(netdev);
++	struct sw *sw = port->sw;
++	struct sockaddr *addr = p;
++	u32 cycles = 0;
++
++	if (!is_valid_ether_addr(addr->sa_data))
++		return -EADDRNOTAVAIL;
++
++	/* Invalidate old ARL Entry */
++	if (port->id == 3)
++		__raw_writel((port->id << 16) | (0x4 << 9), &sw->regs->arl_ctrl[0]);
++	else
++		__raw_writel(((port->id + 1) << 16) | (0x4 << 9), &sw->regs->arl_ctrl[0]);
++	__raw_writel( ((netdev->dev_addr[0] << 24) | (netdev->dev_addr[1] << 16) |
++			(netdev->dev_addr[2] << 8) | (netdev->dev_addr[3])),
++			&sw->regs->arl_ctrl[1]);
++
++	__raw_writel( ((netdev->dev_addr[4] << 24) | (netdev->dev_addr[5] << 16) |
++			(1 << 1)),
++			&sw->regs->arl_ctrl[2]);
++	__raw_writel((1 << 19), &sw->regs->arl_vlan_cmd);
++
++	while (((__raw_readl(&sw->regs->arl_vlan_cmd) & (1 << 21)) == 0)
++			&& cycles < 5000) {
++		udelay(1);
++		cycles++;
++	}
++
++	cycles = 0;
++	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++
++	if (port->id == 3)
++		__raw_writel((port->id << 16) | (0x4 << 9), &sw->regs->arl_ctrl[0]);
++	else
++		__raw_writel(((port->id + 1) << 16) | (0x4 << 9), &sw->regs->arl_ctrl[0]);
++	__raw_writel( ((addr->sa_data[0] << 24) | (addr->sa_data[1] << 16) |
++			(addr->sa_data[2] << 8) | (addr->sa_data[3])),
++			&sw->regs->arl_ctrl[1]);
++
++	__raw_writel( ((addr->sa_data[4] << 24) | (addr->sa_data[5] << 16) |
++			(7 << 4) | (1 << 1)), &sw->regs->arl_ctrl[2]);
++	__raw_writel((1 << 19), &sw->regs->arl_vlan_cmd);
++
++	while (((__raw_readl(&sw->regs->arl_vlan_cmd) & (1 << 21)) == 0)
++		&& cycles < 5000) {
++		udelay(1);
++		cycles++;
++	}
++	return 0;
++}
++
++static int cns3xxx_change_mtu(struct net_device *netdev, int new_mtu)
++{
++	struct port *port = netdev_priv(netdev);
++	struct sw *sw = port->sw;
++	u32 temp;
++	int i;
++	struct _rx_ring *rx_ring = sw->rx_ring;
++	struct rx_desc *desc;
++	struct sk_buff *skb;
++
++	if (new_mtu > MAX_MRU)
++		return -EINVAL;
++
++	netdev->mtu = new_mtu;
++
++	new_mtu += 36 + SKB_DMA_REALIGN;
++	port->mtu = new_mtu;
++
++	new_mtu = 0;
++	for (i = 0; i < 3; i++) {
++		if (switch_port_tab[i]) {
++			if (switch_port_tab[i]->mtu > new_mtu)
++				new_mtu = switch_port_tab[i]->mtu;
++		}
++	}
++
++
++	if (new_mtu == sw->mtu)
++		return 0;
++
++	disable_irq(IRQ_CNS3XXX_SW_R0RXC);
++
++	sw->mtu = new_mtu;
++
++	/* Disable DMA */
++	__raw_writel(TS_SUSPEND | FS_SUSPEND, &sw->regs->dma_auto_poll_cfg);
++
++	for (i = 0; i < RX_DESCS; i++) {
++		desc = &(rx_ring)->desc[i];
++		/* Check if we own it, if we do, it will get set correctly
++		 * when it is re-used */
++		if (!desc->cown) {
++			skb = rx_ring->buff_tab[i];
++			dma_unmap_single(NULL, desc->sdp, desc->sdl,
++					 DMA_FROM_DEVICE);
++			dev_kfree_skb(skb);
++
++			if ((skb = dev_alloc_skb(new_mtu))) {
++				if (SKB_DMA_REALIGN)
++					skb_reserve(skb, SKB_DMA_REALIGN);
++				skb_reserve(skb, NET_IP_ALIGN);
++				desc->sdp = dma_map_single(NULL, skb->data,
++					    new_mtu, DMA_FROM_DEVICE);
++				if (dma_mapping_error(NULL, desc->sdp)) {
++					dev_kfree_skb(skb);
++					skb = NULL;
++				}
++			}
++
++			/* put the new buffer on RX-free queue */
++			rx_ring->buff_tab[i] = skb;
++
++			if (i == RX_DESCS - 1)
++				desc->config0 = END_OF_RING | FIRST_SEGMENT |
++						LAST_SEGMENT | new_mtu;
++			else
++				desc->config0 = FIRST_SEGMENT |
++						LAST_SEGMENT | new_mtu;
++		}
++	}
++
++	/* Re-ENABLE DMA */
++	temp = __raw_readl(&sw->regs->dma_auto_poll_cfg);
++	temp &= ~(TS_SUSPEND | FS_SUSPEND);
++	__raw_writel(temp, &sw->regs->dma_auto_poll_cfg);
++
++	__raw_writel((TS_POLL_EN | FS_POLL_EN), &sw->regs->dma_auto_poll_cfg);
++
++	enable_irq(IRQ_CNS3XXX_SW_R0RXC);
++
++	return 0;
++}
++
++static const struct net_device_ops cns3xxx_netdev_ops = {
++	.ndo_open = eth_open,
++	.ndo_stop = eth_close,
++	.ndo_start_xmit = eth_xmit,
++	.ndo_set_rx_mode = eth_rx_mode,
++	.ndo_do_ioctl = eth_ioctl,
++	.ndo_change_mtu = cns3xxx_change_mtu,
++	.ndo_set_mac_address = eth_set_mac,
++	.ndo_validate_addr = eth_validate_addr,
++};
++
++static int __devinit eth_init_one(struct platform_device *pdev)
++{
++	int i;
++	struct port *port;
++	struct sw *sw;
++	struct net_device *dev;
++	struct cns3xxx_plat_info *plat = pdev->dev.platform_data;
++	u32 regs_phys;
++	char phy_id[MII_BUS_ID_SIZE + 3];
++	int err;
++	u32 temp;
++
++	spin_lock_init(&tx_lock);
++	spin_lock_init(&stat_lock);
++
++	if (!(napi_dev = alloc_etherdev(sizeof(struct sw))))
++		return -ENOMEM;
++	strcpy(napi_dev->name, "switch%d");
++
++	SET_NETDEV_DEV(napi_dev, &pdev->dev);
++	sw = netdev_priv(napi_dev);
++	memset(sw, 0, sizeof(struct sw));
++	sw->regs = (struct switch_regs __iomem *)CNS3XXX_SWITCH_BASE_VIRT;
++	regs_phys = CNS3XXX_SWITCH_BASE;
++	sw->mem_res = request_mem_region(regs_phys, REGS_SIZE, napi_dev->name);
++	if (!sw->mem_res) {
++		err = -EBUSY;
++		goto err_free;
++	}
++
++	sw->mtu = 1536 + SKB_DMA_REALIGN;
++
++	for (i = 0; i < 4; i++) {
++		temp = __raw_readl(&sw->regs->mac_cfg[i]);
++		temp |= (PORT_DISABLE) | 0x80000000;
++		__raw_writel(temp, &sw->regs->mac_cfg[i]);
++	}
++
++	temp = PORT_DISABLE;
++	__raw_writel(temp, &sw->regs->mac_cfg[2]);
++
++	temp = __raw_readl(&sw->regs->vlan_cfg);
++	temp |= NIC_MODE | VLAN_UNAWARE;
++	__raw_writel(temp, &sw->regs->vlan_cfg);
++
++	__raw_writel(UNKNOWN_VLAN_TO_CPU | ACCEPT_CRC_PACKET |
++		     CRC_STRIPPING, &sw->regs->mac_glob_cfg);
++
++	if (!(sw->rx_ring = kmalloc(sizeof(struct _rx_ring), GFP_KERNEL))) {
++		err = -ENOMEM;
++		goto err_free;
++	}
++	memset(sw->rx_ring, 0, sizeof(struct _rx_ring));
++
++	if (!(sw->tx_ring = kmalloc(sizeof(struct _tx_ring), GFP_KERNEL))) {
++		err = -ENOMEM;
++		goto err_free_rx;
++	}
++	memset(sw->tx_ring, 0, sizeof(struct _tx_ring));
++
++	if ((err = init_rings(sw)) != 0) {
++		destroy_rings(sw);
++		err = -ENOMEM;
++		goto err_free_rings;
++	}
++	platform_set_drvdata(pdev, napi_dev);
++
++	netif_napi_add(napi_dev, &sw->napi, eth_poll, NAPI_WEIGHT);
++
++	for (i = 0; i < 3; i++) {
++		if (!(plat->ports & (1 << i))) {
++			continue;
++		}
++
++		if (!(dev = alloc_etherdev(sizeof(struct port)))) {
++			goto free_ports;
++		}
++
++		//SET_NETDEV_DEV(dev, &pdev->dev);
++		port = netdev_priv(dev);
++		port->netdev = dev;
++		if (i == 2)
++			port->id = 3;
++		else
++			port->id = i;
++		port->sw = sw;
++		port->mtu = sw->mtu;
++
++		temp = __raw_readl(&sw->regs->mac_cfg[port->id]);
++		temp |= (PORT_DISABLE);
++		__raw_writel(temp, &sw->regs->mac_cfg[port->id]);
++
++		dev->netdev_ops = &cns3xxx_netdev_ops;
++		dev->ethtool_ops = &cns3xxx_ethtool_ops;
++		dev->tx_queue_len = 1000;
++		dev->features = NETIF_F_HW_CSUM;
++
++		dev->vlan_features = NETIF_F_HW_CSUM;
++
++		switch_port_tab[i] = port;
++		memcpy(dev->dev_addr, &plat->hwaddr[i], ETH_ALEN);
++
++		snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy[i]);
++		port->phydev = phy_connect(dev, phy_id, &cns3xxx_adjust_link, 0,
++			PHY_INTERFACE_MODE_RGMII);
++		if ((err = IS_ERR(port->phydev))) {
++			switch_port_tab[i] = 0;
++			free_netdev(dev);
++			goto free_ports;
++		}
++
++		port->phydev->irq = PHY_POLL;
++
++		if ((err = register_netdev(dev))) {
++			phy_disconnect(port->phydev);
++			switch_port_tab[i] = 0;
++			free_netdev(dev);
++			goto free_ports;
++		}
++
++		printk(KERN_INFO "%s: RGMII PHY %i on cns3xxx Switch\n", dev->name, plat->phy[i]);
++		netif_carrier_off(dev);
++		dev = 0;
++	}
++
++	return 0;
++
++free_ports:
++	err = -ENOMEM;
++	for (--i; i >= 0; i--) {
++		if (switch_port_tab[i]) {
++			port = switch_port_tab[i];
++			dev = port->netdev;
++			unregister_netdev(dev);
++			phy_disconnect(port->phydev);
++			switch_port_tab[i] = 0;
++			free_netdev(dev);
++		}
++	}
++err_free_rings:
++	kfree(sw->tx_ring);
++err_free_rx:
++	kfree(sw->rx_ring);
++err_free:
++	free_netdev(napi_dev);
++	return err;
++}
++
++static int __devexit eth_remove_one(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct sw *sw = netdev_priv(dev);
++	int i;
++	destroy_rings(sw);
++
++	for (i = 2; i >= 0; i--) {
++		if (switch_port_tab[i]) {
++			struct port *port = switch_port_tab[i];
++			struct net_device *dev = port->netdev;
++			unregister_netdev(dev);
++			phy_disconnect(port->phydev);
++			switch_port_tab[i] = 0;
++			free_netdev(dev);
++		}
++	}
++
++	release_resource(sw->mem_res);
++	free_netdev(napi_dev);
++	return 0;
++}
++
++static struct platform_driver cns3xxx_eth_driver = {
++	.driver.name	= DRV_NAME,
++	.probe		= eth_init_one,
++	.remove		= eth_remove_one,
++};
++
++static int __init eth_init_module(void)
++{
++	int err;
++	if ((err = cns3xxx_mdio_register()))
++		return err;
++	return platform_driver_register(&cns3xxx_eth_driver);
++}
++
++static void __exit eth_cleanup_module(void)
++{
++	platform_driver_unregister(&cns3xxx_eth_driver);
++	cns3xxx_mdio_remove();
++}
++
++module_init(eth_init_module);
++module_exit(eth_cleanup_module);
++
++MODULE_AUTHOR("Chris Lang");
++MODULE_DESCRIPTION("Cavium CNS3xxx Ethernet driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:cns3xxx_eth");
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/include/mach/platform.h
+@@ -0,0 +1,26 @@
++/*
++ * arch/arm/mach-cns3xxx/include/mach/platform.h
++ *
++ * Copyright 2011 Gateworks Corporation
++ *		  Chris Lang <clang@gateworks.com
++ *
++ * This file is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License, Version 2, as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_ARCH_PLATFORM_H
++#define __ASM_ARCH_PLATFORM_H
++
++#ifndef __ASSEMBLY__
++
++/* Information about built-in Ethernet MAC interfaces */
++struct cns3xxx_plat_info {
++	u8 ports; /* Bitmap of enabled Ports */
++	u8 hwaddr[4][6];
++	u32 phy[3];
++};
++
++#endif /* __ASM_ARCH_PLATFORM_H */
++#endif
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -32,6 +32,7 @@ source "drivers/net/ethernet/calxeda/Kco
+ source "drivers/net/ethernet/chelsio/Kconfig"
+ source "drivers/net/ethernet/cirrus/Kconfig"
+ source "drivers/net/ethernet/cisco/Kconfig"
++source "drivers/net/ethernet/cavium/Kconfig"
+ source "drivers/net/ethernet/davicom/Kconfig"
+ 
+ config DNET
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
+ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
+ obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/
++obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/
+ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+ obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
+ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+--- /dev/null
++++ b/drivers/net/ethernet/cavium/Kconfig
+@@ -0,0 +1,24 @@
++config NET_VENDOR_CAVIUM
++	bool "Cavium devices"
++	default y
++	depends on ARCH_CNS3XXX
++	---help---
++	  If you have a network (Ethernet) chipset belonging to this class,
++	  say Y.
++
++	  Note that the answer to this question does not directly affect
++	  the kernel: saying N will just case the configurator to skip all
++	  the questions regarding AMD chipsets. If you say Y, you will be asked
++	  for your specific chipset/driver in the following questions.
++
++if NET_VENDOR_CAVIUM
++
++config CNS3XXX_ETH
++	tristate "Cavium CNS3xxx Ethernet support"
++	depends on ARCH_CNS3XXX
++	select PHYLIB
++	help
++	  Say Y here if you want to use built-in Ethernet ports
++	  on CNS3XXX processor.
++
++endif
+--- /dev/null
++++ b/drivers/net/ethernet/cavium/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for the Cavium ethernet device drivers.
++#
++
++obj-$(CNS3XXX_ETH) += cns3xxx_eth.o
diff --git a/target/linux/cns3xxx/patches-3.3/052-cns3xxx_spi.patch b/target/linux/cns3xxx/patches-3.3/052-cns3xxx_spi.patch
new file mode 100644
index 0000000000..2818b49542
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/052-cns3xxx_spi.patch
@@ -0,0 +1,509 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -117,6 +117,13 @@ config SPI_BUTTERFLY
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_CNS3XXX
++	tristate "CNS3XXX SPI controller"
++	depends on ARCH_CNS3XXX && SPI_MASTER
++	select SPI_BITBANG
++	help
++	  This enables using the CNS3XXX SPI controller in master mode.
++
+ config SPI_COLDFIRE_QSPI
+ 	tristate "Freescale Coldfire QSPI controller"
+ 	depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_SPI_BFIN)			+= spi-bfin5xx.
+ obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
++obj-$(CONFIG_SPI_CNS3XXX)		+= spi_cns3xxx.o
+ obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
+ obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
+ obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
+--- /dev/null
++++ b/drivers/spi/spi_cns3xxx.c
+@@ -0,0 +1,449 @@
++/*******************************************************************************
++ *
++ *  CNS3XXX SPI controller driver (master mode only)
++ *
++ *  Copyright (c) 2008 Cavium Networks
++ *  Copyright 2011 Gateworks Corporation
++ *		   Chris Lang <clang@gateworks.com>
++ *
++ *  This file is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License, Version 2, as
++ *  published by the Free Software Foundation.
++ *
++ *  This file is distributed in the hope that it will be useful,
++ *  but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
++ *  NONINFRINGEMENT.  See the GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this file; if not, write to the Free Software
++ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
++ *  visit http://www.gnu.org/licenses/.
++ *
++ *  This file may also be available under a different license from Cavium.
++ *  Contact Cavium Networks for more information
++ *
++ ******************************************************************************/
++
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mtd/partitions.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++#include <asm/io.h>
++#include <asm/memory.h>
++#include <asm/dma.h>
++#include <asm/delay.h>
++#include <mach/cns3xxx.h>
++#include <linux/module.h>
++#include <mach/pm.h>
++
++/*
++ * define access macros
++ */
++#define SPI_MEM_MAP_VALUE(reg_offset)		(*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset)))
++
++#define SPI_CONFIGURATION_REG			SPI_MEM_MAP_VALUE(0x40)
++#define SPI_SERVICE_STATUS_REG			SPI_MEM_MAP_VALUE(0x44)
++#define SPI_BIT_RATE_CONTROL_REG		SPI_MEM_MAP_VALUE(0x48)
++#define SPI_TRANSMIT_CONTROL_REG		SPI_MEM_MAP_VALUE(0x4C)
++#define SPI_TRANSMIT_BUFFER_REG			SPI_MEM_MAP_VALUE(0x50)
++#define SPI_RECEIVE_CONTROL_REG			SPI_MEM_MAP_VALUE(0x54)
++#define SPI_RECEIVE_BUFFER_REG			SPI_MEM_MAP_VALUE(0x58)
++#define SPI_FIFO_TRANSMIT_CONFIG_REG		SPI_MEM_MAP_VALUE(0x5C)
++#define SPI_FIFO_TRANSMIT_CONTROL_REG		SPI_MEM_MAP_VALUE(0x60)
++#define SPI_FIFO_RECEIVE_CONFIG_REG		SPI_MEM_MAP_VALUE(0x64)
++#define SPI_INTERRUPT_STATUS_REG		SPI_MEM_MAP_VALUE(0x68)
++#define SPI_INTERRUPT_ENABLE_REG		SPI_MEM_MAP_VALUE(0x6C)
++
++#define SPI_TRANSMIT_BUFFER_REG_ADDR		(CNS3XXX_SSP_BASE +0x50)
++#define SPI_RECEIVE_BUFFER_REG_ADDR		(CNS3XXX_SSP_BASE +0x58)
++
++/* Structure for SPI controller of CNS3XXX SOCs */
++struct cns3xxx_spi {
++	/* bitbang has to be first */
++	struct spi_bitbang bitbang;
++	struct completion done;
++	wait_queue_head_t wait;
++
++	int len;
++	int count;
++	int last_in_message_list;
++
++	/* data buffers */
++	const unsigned char *tx;
++	unsigned char *rx;
++
++	struct spi_master *master;
++	struct platform_device *pdev;
++	struct device *dev;
++};
++
++static inline u8 cns3xxx_spi_bus_idle(void)
++{
++	return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1);
++}
++
++static inline u8 cns3xxx_spi_tx_buffer_empty(void)
++{
++	return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0);
++}
++
++static inline u8 cns3xxx_spi_rx_buffer_full(void)
++{
++	return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0);
++}
++
++u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data,
++			    u32 * rx_data)
++{
++	u8 rx_channel;
++	u8 rx_eof;
++
++	while (!cns3xxx_spi_bus_idle()) ;	// do nothing
++
++	while (!cns3xxx_spi_tx_buffer_empty()) ;	// do nothing
++
++	SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++	SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
++
++	SPI_TRANSMIT_BUFFER_REG = tx_data;
++
++	while (!cns3xxx_spi_rx_buffer_full()) ;	// do nothing
++
++	rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3;
++	rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0;
++
++	*rx_data = SPI_RECEIVE_BUFFER_REG;
++
++	if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) {
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data)
++{
++
++        while (!cns3xxx_spi_bus_idle()) ;       // do nothing
++
++        while (!cns3xxx_spi_tx_buffer_empty()) ;        // do nothing
++
++        SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++        SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2);
++
++        SPI_TRANSMIT_BUFFER_REG = tx_data;
++
++        return 1;
++}
++
++static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev)
++{
++	return spi_master_get_devdata(sdev->master);
++}
++
++static int cns3xxx_spi_setup_transfer(struct spi_device *spi,
++				      struct spi_transfer *t)
++{
++	return 0;
++}
++
++static void cns3xxx_spi_chipselect(struct spi_device *spi, int value)
++{
++	unsigned int spi_config;
++
++	switch (value) {
++	case BITBANG_CS_INACTIVE:
++		break;
++
++	case BITBANG_CS_ACTIVE:
++		spi_config = SPI_CONFIGURATION_REG;
++
++		if (spi->mode & SPI_CPHA)
++			spi_config |= (0x1 << 13);
++		else
++			spi_config &= ~(0x1 << 13);
++
++		if (spi->mode & SPI_CPOL)
++			spi_config |= (0x1 << 14);
++		else
++			spi_config &= ~(0x1 << 14);
++
++		/* write new configration */
++		SPI_CONFIGURATION_REG = spi_config;
++
++		SPI_TRANSMIT_CONTROL_REG &= ~(0x7);
++		SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3);
++
++		break;
++	}
++}
++
++static int cns3xxx_spi_setup(struct spi_device *spi)
++{
++	if (!spi->bits_per_word)
++		spi->bits_per_word = 8;
++
++	return 0;
++}
++
++static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct cns3xxx_spi *hw = to_hw(spi);
++
++	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf,
++		t->len);
++
++	hw->tx = t->tx_buf;
++	hw->rx = t->rx_buf;
++	hw->len = t->len;
++	hw->count = 0;
++	hw->last_in_message_list = t->last_in_message_list;
++
++	init_completion(&hw->done);
++
++	if (hw->tx) {
++		int i;
++		u32 rx_data;
++		for (i = 0; i < (hw->len - 1); i++) {
++			dev_dbg(&spi->dev,
++				"[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i,
++				hw->tx[i]);
++			cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
++					  &rx_data);
++			if (hw->rx) {
++				hw->rx[i] = rx_data;
++				dev_dbg(&spi->dev,
++					"[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++					i, hw->rx[i]);
++			}
++		}
++
++		if (t->last_in_message_list) {
++			cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i],
++					  &rx_data);
++			if (hw->rx) {
++				hw->rx[i] = rx_data;
++				dev_dbg(&spi->dev,
++					"[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++					i, hw->rx[i]);
++			}
++		} else {
++			cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i],
++					  &rx_data);
++		}
++		goto done;
++	}
++
++	if (hw->rx) {
++		int i;
++		u32 rx_data;
++		for (i = 0; i < (hw->len - 1); i++) {
++			cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
++			hw->rx[i] = rx_data;
++			dev_dbg(&spi->dev,
++				"[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i,
++				hw->rx[i]);
++		}
++
++		if (t->last_in_message_list) {
++			cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data);
++		} else {
++			cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data);
++		}
++		hw->rx[i] = rx_data;
++		dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n",
++			i, hw->rx[i]);
++	}
++done:
++	return hw->len;
++}
++
++static void __init cns3xxx_spi_initial(void)
++{
++	u32 __iomem *gpiob = __io(CNS3XXX_MISC_BASE_VIRT + 0x0018);
++	u32 gpiob_pins = __raw_readl(gpiob);
++
++	/* MMC/SD pins share with GPIOA */
++	gpiob_pins |= 0xf80;
++	__raw_writel(gpiob_pins, gpiob);
++
++	/* share pin config. */
++	//PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5);
++	//HAL_MISC_ENABLE_SPI_PINS();
++	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C));
++	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C));
++
++	SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) |	/* 8bits shift length */
++				 (0x0 << 9) |	/* SPI mode */
++				 (0x0 << 10) |	/* disable FIFO */
++				 (0x1 << 11) |	/* SPI master mode */
++				 (0x0 << 12) |	/* disable SPI loopback mode */
++				 (0x1 << 13) |	/* clock phase */
++				 (0x1 << 14) |	/* clock polarity */
++				 (0x0 << 24) |	/* disable - SPI data swap */
++				 (0x1 << 29) |	/* enable - 2IO Read mode */
++				 (0x0 << 30) |	/* disable - SPI high speed read for system boot up */
++				 (0x0 << 31));	/* disable - SPI */
++
++	/* Set SPI bit rate PCLK/2 */
++	SPI_BIT_RATE_CONTROL_REG = 0x1;
++
++	/* Set SPI Tx channel 0 */
++	SPI_TRANSMIT_CONTROL_REG = 0x0;
++
++	/* Set Tx FIFO Threshold, Tx FIFO has 2 words */
++	SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4);
++	SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4);
++
++	/* Set Rx FIFO Threshold, Rx FIFO has 2 words */
++	SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4);
++	SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4);
++
++	/* Disable all interrupt */
++	SPI_INTERRUPT_ENABLE_REG = 0x0;
++
++	/* Clear spurious interrupt sources */
++	SPI_INTERRUPT_STATUS_REG = (0x0F << 4);
++
++	/* Enable SPI */
++	SPI_CONFIGURATION_REG |= (0x1 << 31);
++
++	return;
++}
++
++static int __devinit cns3xxx_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct cns3xxx_spi *hw;
++	int err = 0;
++
++	printk("%s: setup CNS3XXX SPI Controller\n", __FUNCTION__);
++
++	/* Allocate master with space for cns3xxx_spi */
++	master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi));
++	if (master == NULL) {
++		dev_err(&pdev->dev, "No memory for spi_master\n");
++		err = -ENOMEM;
++		goto err_nomem;
++	}
++
++	hw = spi_master_get_devdata(master);
++	memset(hw, 0, sizeof(struct cns3xxx_spi));
++
++	hw->master = spi_master_get(master);
++	hw->dev = &pdev->dev;
++
++	platform_set_drvdata(pdev, hw);
++	init_completion(&hw->done);
++
++	/* setup the master state. */
++
++	master->num_chipselect = 4;
++	master->bus_num = 1;
++
++	/* setup the state for the bitbang driver */
++
++	hw->bitbang.master = hw->master;
++	hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer;
++	hw->bitbang.chipselect = cns3xxx_spi_chipselect;
++	hw->bitbang.txrx_bufs = cns3xxx_spi_txrx;
++	hw->bitbang.master->setup = cns3xxx_spi_setup;
++
++	dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
++
++	/* SPI controller initializations */
++	cns3xxx_spi_initial();
++
++	/* register SPI controller */
++
++	err = spi_bitbang_start(&hw->bitbang);
++	if (err) {
++		dev_err(&pdev->dev, "Failed to register SPI master\n");
++		goto err_register;
++	}
++
++	return 0;
++
++err_register:
++	spi_master_put(hw->master);;
++
++err_nomem:
++	return err;
++}
++
++static int __devexit cns3xxx_spi_remove(struct platform_device *dev)
++{
++	struct cns3xxx_spi *hw = platform_get_drvdata(dev);
++
++	platform_set_drvdata(dev, NULL);
++
++	spi_unregister_master(hw->master);
++
++	spi_master_put(hw->master);
++	return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++	struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
++
++	return 0;
++}
++
++static int cns3xxx_spi_resume(struct platform_device *pdev)
++{
++	struct cns3xxx_spi *hw = platform_get_drvdata(pdev);
++
++	return 0;
++}
++
++#else
++#define cns3xxx_spi_suspend	NULL
++#define cns3xxx_spi_resume	NULL
++#endif
++
++static struct platform_driver cns3xxx_spi_driver = {
++	.probe		= cns3xxx_spi_probe,
++	.remove		= __devexit_p(cns3xxx_spi_remove),
++	.suspend	= cns3xxx_spi_suspend,
++	.resume		= cns3xxx_spi_resume,
++	.driver		= {
++		.name = "cns3xxx_spi",
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init cns3xxx_spi_init(void)
++{
++	return platform_driver_register(&cns3xxx_spi_driver);
++}
++
++static void __exit cns3xxx_spi_exit(void)
++{
++	platform_driver_unregister(&cns3xxx_spi_driver);
++}
++
++module_init(cns3xxx_spi_init);
++module_exit(cns3xxx_spi_exit);
++
++MODULE_AUTHOR("Cavium Networks");
++MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:cns3xxx_spi");
++
++EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx);
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -457,6 +457,13 @@ struct spi_transfer {
+ 	u32		speed_hz;
+ 
+ 	struct list_head transfer_list;
++
++#ifdef CONFIG_ARCH_CNS3XXX
++	unsigned	last_in_message_list;
++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
++	u8		dio_read;
++#endif
++#endif
+ };
+ 
+ /**
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -330,6 +330,12 @@ static void bitbang_work(struct work_str
+ 				 */
+ 				if (!m->is_dma_mapped)
+ 					t->rx_dma = t->tx_dma = 0;
++
++				if (t->transfer_list.next == &m->transfers)
++					t->last_in_message_list = 1;
++				else
++					t->last_in_message_list = 0;
++
+ 				status = bitbang->txrx_bufs(spi, t);
+ 			}
+ 			if (status > 0)
diff --git a/target/linux/cns3xxx/patches-3.3/054-cns3xxx_pcie_clock.patch b/target/linux/cns3xxx/patches-3.3/054-cns3xxx_pcie_clock.patch
new file mode 100644
index 0000000000..0c6c525039
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/054-cns3xxx_pcie_clock.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -378,8 +378,6 @@ static int __init cns3xxx_pcie_init(void
+ 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+ 		iotable_init(cns3xxx_pcie[i].cfg_bases,
+ 			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
+-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+ 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+ 		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+ 		pci_common_init(&cns3xxx_pcie[i].hw_pci);
diff --git a/target/linux/cns3xxx/patches-3.3/100-laguna_support.patch b/target/linux/cns3xxx/patches-3.3/100-laguna_support.patch
new file mode 100644
index 0000000000..0137ae0d80
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/100-laguna_support.patch
@@ -0,0 +1,992 @@
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -0,0 +1,761 @@
++/*
++ * Gateworks Corporation Laguna Platform
++ *
++ * Copyright 2000 Deep Blue Solutions Ltd
++ * Copyright 2008 ARM Limited
++ * Copyright 2008 Cavium Networks
++ *		  Scott Shu
++ * Copyright 2010 MontaVista Software, LLC.
++ *		  Anton Vorontsov <avorontsov@mvista.com>
++ * Copyright 2011 Gateworks Corporation
++ *		  Chris Lang <clang@gateworks.com>
++ *
++ * This file is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License, Version 2, as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/serial_core.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/physmap.h>
++#include <linux/mtd/partitions.h>
++#include <linux/leds.h>
++#include <linux/i2c.h>
++#include <linux/i2c/at24.h>
++#include <linux/i2c/pca953x.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/if_ether.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/time.h>
++#include <mach/cns3xxx.h>
++#include <mach/irqs.h>
++#include <mach/platform.h>
++#include <mach/pm.h>
++#include "core.h"
++#include "devices.h"
++
++// Config 1 Bitmap
++#define ETH0_LOAD           BIT(0)
++#define ETH1_LOAD           BIT(1)
++#define ETH2_LOAD           BIT(2)
++#define SATA0_LOAD          BIT(3)
++#define SATA1_LOAD          BIT(4)
++#define PCM_LOAD            BIT(5)
++#define I2S_LOAD            BIT(6)
++#define SPI0_LOAD           BIT(7)
++#define SPI1_LOAD           BIT(8)
++#define PCIE0_LOAD          BIT(9)
++#define PCIE1_LOAD          BIT(10)
++#define USB0_LOAD           BIT(11)
++#define USB1_LOAD           BIT(12)
++#define USB1_ROUTE          BIT(13)
++#define SD_LOAD             BIT(14)
++#define UART0_LOAD          BIT(15)
++#define UART1_LOAD          BIT(16)
++#define UART2_LOAD          BIT(17)
++#define MPCI0_LOAD          BIT(18)
++#define MPCI1_LOAD          BIT(19)
++#define MPCI2_LOAD          BIT(20)
++#define MPCI3_LOAD          BIT(21)
++#define FP_BUT_LOAD         BIT(22)
++#define FP_BUT_HEADER_LOAD  BIT(23)
++#define FP_LED_LOAD         BIT(24)
++#define FP_LED_HEADER_LOAD  BIT(25)
++#define FP_TAMPER_LOAD      BIT(26)
++#define HEADER_33V_LOAD     BIT(27)
++#define SATA_POWER_LOAD     BIT(28)
++#define FP_POWER_LOAD       BIT(29)
++#define GPIO_HEADER_LOAD    BIT(30)
++#define GSP_BAT_LOAD        BIT(31)
++
++// Config 2 Bitmap
++#define FAN_LOAD            BIT(0)
++#define SPI_FLASH_LOAD      BIT(1)
++#define NOR_FLASH_LOAD      BIT(2)
++#define GPS_LOAD            BIT(3)
++#define SUPPLY_5V_LOAD      BIT(6)
++#define SUPPLY_33V_LOAD     BIT(7)
++
++struct laguna_board_info {
++	char model[16];
++	u32 config_bitmap;
++	u32 config2_bitmap;
++	u8 nor_flash_size;
++	u8 spi_flash_size;
++};
++
++static struct laguna_board_info laguna_info;
++
++/*
++ * NOR Flash
++ */
++static struct mtd_partition laguna_nor_partitions[] = {
++	{
++		.name		= "uboot",
++		.size		= SZ_256K,
++		.offset		= 0,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "params",
++		.size		= SZ_128K,
++		.offset		= SZ_256K,
++	}, {
++		.name		= "kernel",
++		.size		= SZ_2M,
++		.offset		= SZ_256K + SZ_128K,
++	}, {
++		.name		= "rootfs",
++		.size		= SZ_16M - SZ_256K - SZ_128K - SZ_2M,
++		.offset		= SZ_256K + SZ_128K + SZ_2M,
++	},
++};
++
++static struct physmap_flash_data laguna_nor_pdata = {
++	.width = 2,
++	.parts = laguna_nor_partitions,
++	.nr_parts = ARRAY_SIZE(laguna_nor_partitions),
++};
++
++static struct resource laguna_nor_res = {
++	.start = CNS3XXX_FLASH_BASE,
++	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
++	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
++};
++
++static struct platform_device laguna_nor_pdev = {
++	.name = "physmap-flash",
++	.id = 0,
++	.resource = &laguna_nor_res,
++	.num_resources = 1,
++	.dev = {
++		.platform_data = &laguna_nor_pdata,
++	},
++};
++
++/*
++ * SPI
++ */
++static struct mtd_partition laguna_spi_partitions[] = {
++	{
++		.name		= "uboot",
++		.size		= SZ_256K,
++		.offset		= 0,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "params",
++		.size		= SZ_256K,
++		.offset		= SZ_256K,
++	}, {
++		.name		= "kernel",
++		.size		= SZ_1M + SZ_512K,
++		.offset		= SZ_512K,
++	}, {
++		.name		= "rootfs",
++		.size		= SZ_16M - SZ_2M,
++		.offset		= SZ_2M,
++	},
++};
++
++static struct flash_platform_data laguna_spi_pdata = {
++	.parts = laguna_spi_partitions,
++	.nr_parts = ARRAY_SIZE(laguna_spi_partitions),
++};
++
++static struct spi_board_info __initdata laguna_spi_devices[] = {
++	{
++		.modalias = "m25p80",
++		.platform_data = &laguna_spi_pdata,
++		.max_speed_hz = 50000000,
++		.bus_num = 1,
++		.chip_select = 0,
++	},
++};
++
++static struct platform_device laguna_spi_controller = {
++	.name = "cns3xxx_spi",
++};
++
++/*
++ * LED's
++ */
++static struct gpio_led laguna_gpio_leds[] = {
++	{
++		.name = "user1", /* Green Led */
++		.gpio = 115,
++		.active_low = 1,
++	},{
++		.name = "user2", /* Red Led */
++		.gpio = 114,
++		.active_low = 1,
++	},{
++		.name = "pwr1", /* Green Led */
++		.gpio = 116,
++		.active_low = 1,
++	},{
++		.name = "pwr2", /* Yellow Led */
++		.gpio = 117,
++		.active_low = 1,
++	},{
++		.name = "txd1", /* Green Led */
++		.gpio = 118,
++		.active_low = 1,
++	},{
++		.name = "txd2", /* Yellow Led */
++		.gpio = 119,
++		.active_low = 1,
++	},{
++		.name = "rxd1", /* Green Led */
++		.gpio = 120,
++		.active_low = 1,
++	},{
++		.name = "rxd2", /* Yellow Led */
++		.gpio = 121,
++		.active_low = 1,
++	},{
++		.name = "ser1", /* Green Led */
++		.gpio = 122,
++		.active_low = 1,
++	},{
++		.name = "ser2", /* Yellow Led */
++		.gpio = 123,
++		.active_low = 1,
++	},{
++		.name = "enet1", /* Green Led */
++		.gpio = 124,
++		.active_low = 1,
++	},{
++		.name = "enet2", /* Yellow Led */
++		.gpio = 125,
++		.active_low = 1,
++	},{
++		.name = "sig1_1", /* Green Led */
++		.gpio = 126,
++		.active_low = 1,
++	},{
++		.name = "sig1_2", /* Yellow Led */
++		.gpio = 127,
++		.active_low = 1,
++	},{
++		.name = "sig2_1", /* Green Led */
++		.gpio = 128,
++		.active_low = 1,
++	},{
++		.name = "sig2_2", /* Yellow Led */
++		.gpio = 129,
++		.active_low = 1,
++	},{
++		.name = "sig3_1", /* Green Led */
++		.gpio = 130,
++		.active_low = 1,
++	},{
++		.name = "sig3_2", /* Yellow Led */
++		.gpio = 131,
++		.active_low = 1,
++	},{
++		.name = "net1", /*Green Led */
++		.gpio = 109,
++		.active_low = 1,
++	},{
++		.name = "net2", /* Red Led */
++		.gpio = 110,
++		.active_low = 1,
++	},{
++		.name = "mod1", /* Green Led */
++		.gpio = 111,
++		.active_low = 1,
++	},{
++		.name = "mod2", /* Red Led */
++		.gpio = 112,
++		.active_low = 1,
++	},
++};
++
++static struct gpio_led_platform_data laguna_gpio_leds_data = {
++	.num_leds = 22,
++	.leds = laguna_gpio_leds,
++};
++
++static struct platform_device laguna_gpio_leds_device = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev.platform_data = &laguna_gpio_leds_data,
++};
++
++/*
++ * Ethernet
++ */
++static struct cns3xxx_plat_info laguna_net_data = {
++	.ports = 0,
++	.phy = {
++		0,
++		1,
++		2,
++	},
++};
++
++static struct platform_device laguna_net_device = {
++	.name = "cns3xxx_eth",
++	.id = 0,
++	.dev.platform_data = &laguna_net_data,
++};
++
++/*
++ * UART
++ */
++static void __init laguna_early_serial_setup(void)
++{
++#ifdef CONFIG_SERIAL_8250_CONSOLE
++	static struct uart_port laguna_serial_port = {
++		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
++		.mapbase        = CNS3XXX_UART0_BASE,
++		.irq            = IRQ_CNS3XXX_UART0,
++		.iotype         = UPIO_MEM,
++		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
++		.regshift       = 2,
++		.uartclk        = 24000000,
++		.line           = 0,
++		.type           = PORT_16550A,
++		.fifosize       = 16,
++	};
++
++	early_serial_setup(&laguna_serial_port);
++#endif
++}
++
++static struct resource laguna_uart_resources[] = {
++	{
++		.start = CNS3XXX_UART0_BASE,
++		.end   = CNS3XXX_UART0_BASE + SZ_4K - 1,
++		.flags    = IORESOURCE_MEM
++	},{
++		.start = CNS3XXX_UART2_BASE,
++		.end   = CNS3XXX_UART2_BASE + SZ_4K - 1,
++		.flags    = IORESOURCE_MEM
++	},{
++		.start = CNS3XXX_UART2_BASE,
++		.end   = CNS3XXX_UART2_BASE + SZ_4K - 1,
++		.flags    = IORESOURCE_MEM
++	},
++};
++
++static struct plat_serial8250_port laguna_uart_data[] = {
++	{
++		.membase        = (char*) (CNS3XXX_UART0_BASE_VIRT),
++		.mapbase        = (CNS3XXX_UART0_BASE),
++		.irq            = IRQ_CNS3XXX_UART0,
++		.iotype         = UPIO_MEM,
++		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
++		.regshift       = 2,
++		.uartclk        = 24000000,
++		.type           = PORT_16550A,
++	},{
++		.membase        = (char*) (CNS3XXX_UART1_BASE_VIRT),
++		.mapbase        = (CNS3XXX_UART1_BASE),
++		.irq            = IRQ_CNS3XXX_UART1,
++		.iotype         = UPIO_MEM,
++		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
++		.regshift       = 2,
++		.uartclk        = 24000000,
++		.type           = PORT_16550A,
++	},{
++		.membase        = (char*) (CNS3XXX_UART2_BASE_VIRT),
++		.mapbase        = (CNS3XXX_UART2_BASE),
++		.irq            = IRQ_CNS3XXX_UART2,
++		.iotype         = UPIO_MEM,
++		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST,
++		.regshift       = 2,
++		.uartclk        = 24000000,
++		.type           = PORT_16550A,
++	},
++};
++
++static struct platform_device laguna_uart = {
++	.name     = "serial8250",
++	.id     = PLAT8250_DEV_PLATFORM,
++	.dev.platform_data  = laguna_uart_data,
++	.num_resources    = 3,
++	.resource   = laguna_uart_resources
++};
++
++/*
++ * USB
++ */
++static struct resource cns3xxx_usb_ehci_resources[] = {
++	[0] = {
++		.start = CNS3XXX_USB_BASE,
++		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_CNS3XXX_USB_EHCI,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
++
++static struct platform_device cns3xxx_usb_ehci_device = {
++	.name          = "cns3xxx-ehci",
++	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
++	.resource      = cns3xxx_usb_ehci_resources,
++	.dev           = {
++		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++	},
++};
++
++static struct resource cns3xxx_usb_ohci_resources[] = {
++	[0] = {
++		.start = CNS3XXX_USB_OHCI_BASE,
++		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_CNS3XXX_USB_OHCI,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
++
++static struct platform_device cns3xxx_usb_ohci_device = {
++	.name          = "cns3xxx-ohci",
++	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
++	.resource      = cns3xxx_usb_ohci_resources,
++	.dev           = {
++		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++	},
++};
++
++static struct resource cns3xxx_usb_otg_resources[] = {
++	[0] = {
++		.start = CNS3XXX_USBOTG_BASE,
++		.end   = CNS3XXX_USBOTG_BASE + SZ_16M - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = IRQ_CNS3XXX_USB_OTG,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++static u64 cns3xxx_usb_otg_dma_mask = DMA_BIT_MASK(32);
++
++static struct platform_device cns3xxx_usb_otg_device = {
++	.name          = "dwc_otg",
++	.num_resources = ARRAY_SIZE(cns3xxx_usb_otg_resources),
++	.resource      = cns3xxx_usb_otg_resources,
++	.dev           = {
++		.dma_mask          = &cns3xxx_usb_otg_dma_mask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++	},
++};
++
++/*
++ * I2C
++ */
++static struct resource laguna_i2c_resource[] = {
++	{
++		.start    = CNS3XXX_SSP_BASE + 0x20,
++		.end      = 0x7100003f,
++		.flags    = IORESOURCE_MEM,
++	},{
++		.start    = IRQ_CNS3XXX_I2C,
++		.flags    = IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device laguna_i2c_controller = {
++	.name   = "cns3xxx-i2c",
++	.num_resources  = 2,
++	.resource = laguna_i2c_resource,
++};
++
++static struct memory_accessor *at24_mem_acc;
++
++static void at24_setup(struct memory_accessor *mem_acc, void *context)
++{
++	char buf[8];
++
++	at24_mem_acc = mem_acc;
++
++	/* Read MAC addresses */
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x100, 6) == 6)
++		memcpy(&laguna_net_data.hwaddr[0], buf, ETH_ALEN);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x106, 6) == 6)
++		memcpy(&laguna_net_data.hwaddr[1], buf, ETH_ALEN);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x10C, 6) == 6)
++		memcpy(&laguna_net_data.hwaddr[2], buf, ETH_ALEN);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x112, 6) == 6)
++		memcpy(&laguna_net_data.hwaddr[3], buf, ETH_ALEN);
++
++	/* Read out Model Information */
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x130, 16) == 16)
++		memcpy(&laguna_info.model, buf, 16);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x140, 1) == 1)
++		memcpy(&laguna_info.nor_flash_size, buf, 1);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x141, 1) == 1)
++		memcpy(&laguna_info.spi_flash_size, buf, 1);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x142, 4) == 4)
++		memcpy(&laguna_info.config_bitmap, buf, 4);
++	if (at24_mem_acc->read(at24_mem_acc, buf, 0x146, 4) == 4)
++		memcpy(&laguna_info.config2_bitmap, buf, 4);
++};
++
++static struct at24_platform_data laguna_eeprom_info = {
++	.byte_len = 1024,
++	.page_size = 16,
++	.flags = AT24_FLAG_READONLY,
++	.setup = at24_setup,
++};
++
++static struct pca953x_platform_data laguna_pca_data = {
++ 	.gpio_base = 100,
++	.irq_base = -1,
++};
++
++static struct pca953x_platform_data laguna_pca2_data = {
++ 	.gpio_base = 116,
++	.irq_base = -1,
++};
++
++static struct i2c_board_info __initdata laguna_i2c_devices[] = {
++	{
++		I2C_BOARD_INFO("pca9555", 0x23),
++		.platform_data = &laguna_pca_data,
++	},{
++		I2C_BOARD_INFO("pca9555", 0x27),
++		.platform_data = &laguna_pca2_data,
++	},{
++		I2C_BOARD_INFO("gsp", 0x29),
++	},{
++		I2C_BOARD_INFO ("24c08",0x50),
++		.platform_data = &laguna_eeprom_info,
++	},{
++		I2C_BOARD_INFO("ds1672", 0x68),
++	},
++};
++
++/*
++ * Watchdog
++ */
++
++static struct resource laguna_watchdog_resources[] = {
++	[0] = {
++		.start	= CNS3XXX_TC11MP_TWD_BASE,
++		.end	= CNS3XXX_TC11MP_TWD_BASE + SZ_4K - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= IRQ_LOCALWDOG,
++		.end	= IRQ_LOCALWDOG,
++		.flags	= IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device laguna_watchdog = {
++	.name		= "mpcore_wdt",
++	.id		= -1,
++	.num_resources	= ARRAY_SIZE(laguna_watchdog_resources),
++	.resource	= laguna_watchdog_resources,
++};
++
++/*
++ * Initialization
++ */
++
++static void __init laguna_init(void)
++{
++	cns3xxx_l2x0_init();
++
++	platform_device_register(&laguna_watchdog);
++
++	platform_device_register(&laguna_i2c_controller);
++
++	i2c_register_board_info(0, laguna_i2c_devices,
++			ARRAY_SIZE(laguna_i2c_devices));
++
++	pm_power_off = cns3xxx_power_off;
++}
++
++static struct map_desc laguna_io_desc[] __initdata = {
++	{
++		.virtual	= CNS3XXX_UART0_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
++	},{
++		.virtual	= CNS3XXX_UART1_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_UART1_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
++	},{
++		.virtual	= CNS3XXX_UART2_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_UART2_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
++	},
++};
++
++static void __init laguna_map_io(void)
++{
++	cns3xxx_map_io();
++	iotable_init(laguna_io_desc, ARRAY_SIZE(laguna_io_desc));
++	laguna_early_serial_setup();
++}
++
++static int __init laguna_model_setup(void)
++{
++	u32 __iomem *mem;
++	u32 reg;
++	u8 pcie_bitmap = 0;
++
++	printk("Running on Gateworks Laguna %s\n", laguna_info.model);
++
++	if (strncmp(laguna_info.model, "GW", 2) == 0) {
++		if (laguna_info.config_bitmap & ETH0_LOAD)
++			laguna_net_data.ports |= BIT(0);
++		if (laguna_info.config_bitmap & ETH1_LOAD)
++			laguna_net_data.ports |= BIT(1);
++		if (laguna_info.config_bitmap & ETH2_LOAD)
++			laguna_net_data.ports |= BIT(2);
++		if (laguna_net_data.ports)
++			platform_device_register(&laguna_net_device);
++
++		if ((laguna_info.config_bitmap & SATA0_LOAD) ||
++		    (laguna_info.config_bitmap & SATA1_LOAD))
++			cns3xxx_ahci_init();
++
++		if (laguna_info.config_bitmap & (PCIE0_LOAD))
++			pcie_bitmap |= 0x1;
++
++		if (laguna_info.config_bitmap & (PCIE1_LOAD))
++			pcie_bitmap |= 0x2;
++
++		cns3xxx_pcie_init(pcie_bitmap);
++
++		if (laguna_info.config_bitmap & (USB0_LOAD)) {
++			cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
++
++			/* DRVVBUS pins share with GPIOA */
++			mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0014);
++			reg = __raw_readl(mem);
++			reg |= 0x8;
++			__raw_writel(reg, mem);
++
++			/* Enable OTG */
++			mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0808);
++			reg = __raw_readl(mem);
++			reg &= ~(1 << 10);
++			__raw_writel(reg, mem);
++
++			platform_device_register(&cns3xxx_usb_otg_device);
++		}
++
++		if (laguna_info.config_bitmap & (USB1_LOAD)) {
++			platform_device_register(&cns3xxx_usb_ehci_device);
++			platform_device_register(&cns3xxx_usb_ohci_device);
++		}
++
++		if (laguna_info.config_bitmap & (SD_LOAD))
++			cns3xxx_sdhci_init();
++
++		if (laguna_info.config_bitmap & (UART0_LOAD))
++			laguna_uart.num_resources = 1;
++		if (laguna_info.config_bitmap & (UART1_LOAD))
++			laguna_uart.num_resources = 2;
++		if (laguna_info.config_bitmap & (UART2_LOAD))
++			laguna_uart.num_resources = 3;
++		platform_device_register(&laguna_uart);
++
++		if (laguna_info.config2_bitmap & (NOR_FLASH_LOAD)) {
++			switch (laguna_info.nor_flash_size) {
++				case 1:
++					laguna_nor_partitions[3].size = SZ_8M - SZ_256K - SZ_128K - SZ_2M;
++					laguna_nor_res.end = CNS3XXX_FLASH_BASE + SZ_8M - 1;
++				break;
++				case 2:
++					laguna_nor_partitions[3].size = SZ_16M - SZ_256K - SZ_128K - SZ_2M;
++					laguna_nor_res.end = CNS3XXX_FLASH_BASE + SZ_16M - 1;
++				break;
++				case 3:
++					laguna_nor_partitions[3].size = SZ_32M - SZ_256K - SZ_128K - SZ_2M;
++					laguna_nor_res.end = CNS3XXX_FLASH_BASE + SZ_32M - 1;
++				break;
++				case 4:
++					laguna_nor_partitions[3].size = SZ_64M - SZ_256K - SZ_128K - SZ_2M;
++					laguna_nor_res.end = CNS3XXX_FLASH_BASE + SZ_64M - 1;
++				break;
++				case 5:
++					laguna_nor_partitions[3].size = SZ_128M - SZ_256K - SZ_128K - SZ_2M;
++					laguna_nor_res.end = CNS3XXX_FLASH_BASE + SZ_128M - 1;
++				break;
++			}
++			platform_device_register(&laguna_nor_pdev);
++		}
++
++		if (laguna_info.config2_bitmap & (SPI_FLASH_LOAD)) {
++			switch (laguna_info.spi_flash_size) {
++				case 1:
++					laguna_spi_partitions[3].size = SZ_4M - SZ_2M;
++				break;
++				case 2:
++					laguna_spi_partitions[3].size = SZ_8M - SZ_2M;
++				break;
++				case 3:
++					laguna_spi_partitions[3].size = SZ_16M - SZ_2M;
++				break;
++				case 4:
++					laguna_spi_partitions[3].size = SZ_32M - SZ_2M;
++				break;
++				case 5:
++					laguna_spi_partitions[3].size = SZ_64M - SZ_2M;
++				break;
++			}
++			spi_register_board_info(laguna_spi_devices, ARRAY_SIZE(laguna_spi_devices));
++		}
++
++		if ((laguna_info.config_bitmap & SPI0_LOAD) ||
++		    (laguna_info.config_bitmap & SPI1_LOAD))
++			platform_device_register(&laguna_spi_controller);
++
++		/*
++		 * Do any model specific setup not known by the bitmap by matching
++		 *  the first 6 characters of the model name
++		 */
++
++		if (strncmp(laguna_info.model, "GW2388", 6) == 0) {
++			laguna_gpio_leds_data.num_leds = 2;
++		} else if (strncmp(laguna_info.model, "GW2380", 6) == 0) {
++			laguna_gpio_leds[0].gpio = 107;
++			laguna_gpio_leds[1].gpio = 106;
++			laguna_gpio_leds_data.num_leds = 2;
++		}
++		platform_device_register(&laguna_gpio_leds_device);
++	} else {
++		// Do some defaults here, not sure what yet
++	}
++	return 0;
++}
++
++late_initcall(laguna_model_setup);
++
++MACHINE_START(GW2388, "Gateworks Corporation Laguna Platform")
++	.atag_offset	= 0x100,
++	.map_io		= laguna_map_io,
++	.init_irq	= cns3xxx_init_irq,
++	.timer		= &cns3xxx_timer,
++	.init_machine	= laguna_init,
++MACHINE_END
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -11,4 +11,14 @@ config MACH_CNS3420VB
+ 	  This is a platform with an on-board ARM11 MPCore and has support
+ 	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+ 
++config MACH_GW2388
++	bool "Support for Gateworks Laguna Platform"
++	select HAVE_ARM_SCU if SMP
++	select MIGHT_HAVE_PCI
++	help
++	  Include support for the Gateworks Laguna Platform
++
++	  This is a platform with an on-board ARM11 MPCore and has support
++	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
++
+ endmenu
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -19,6 +19,7 @@
+ #include <asm/mach/time.h>
+ #include <asm/mach/irq.h>
+ #include <asm/hardware/gic.h>
++#include <asm/smp_twd.h>
+ #include <asm/hardware/cache-l2x0.h>
+ #include <mach/cns3xxx.h>
+ #include "core.h"
+@@ -68,11 +69,24 @@ static struct map_desc cns3xxx_io_desc[]
+ 		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
+ 		.length		= SZ_4K,
+ 		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_SWITCH_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_SWITCH_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_SSP_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_SSP_BASE),
++		.length		= SZ_4K,
++		.type		= MT_DEVICE,
+ 	},
+ };
+ 
+ void __init cns3xxx_map_io(void)
+ {
++#ifdef CONFIG_LOCAL_TIMERS
++	twd_base = (void __iomem *) CNS3XXX_TC11MP_TWD_BASE_VIRT;
++#endif
+ 	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
+ }
+ 
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -366,6 +366,7 @@ config ARCH_CLPS711X
+ config ARCH_CNS3XXX
+ 	bool "Cavium Networks CNS3XXX family"
+ 	select CPU_V6K
++	select ARCH_WANT_OPTIONAL_GPIOLIB
+ 	select GENERIC_CLOCKEVENTS
+ 	select ARM_GIC
+ 	select CLKDEV_LOOKUP
+--- /dev/null
++++ b/arch/arm/mach-cns3xxx/include/mach/gpio.h
+@@ -0,0 +1,98 @@
++/*
++ * arch/arm/mach-cns3xxx/include/mach/gpio.h
++ *
++ * CNS3xxx GPIO wrappers for arch-neutral GPIO calls
++ *
++ * Copyright 2011 Gateworks Corporation
++ *		  Chris Lang <clang@gateworks.com>
++ *
++ * Based on IXP implementation by Milan Svoboda <msvoboda@ra.rockwell.com>
++ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ */
++
++#ifndef __ASM_ARCH_CNS3XXX_GPIO_H
++#define __ASM_ARCH_CNS3XXX_GPIO_H
++
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <mach/platform.h>
++#include <asm-generic/gpio.h>			/* cansleep wrappers */
++
++#define NR_BUILTIN_GPIO 64
++
++#define CNS3XXX_GPIO_IN    0x0
++#define CNS3XXX_GPIO_OUT   0x1
++
++#define CNS3XXX_GPIO_LO   0
++#define CNS3XXX_GPIO_HI   1
++
++#define CNS3XXX_GPIO_OUTPUT         0x00
++#define CNS3XXX_GPIO_INPUT          0x04
++#define CNS3XXX_GPIO_DIR            0x08
++#define CNS3XXX_GPIO_SET            0x10
++#define CNS3XXX_GPIO_CLEAR          0x14
++
++static inline void gpio_line_get(u8 line, int *value)
++{
++	if (line < 32)
++		*value = ((__raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_INPUT) >> line) & 0x1);
++	else
++		*value = ((__raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_INPUT) >> (line - 32)) & 0x1);
++}
++
++static inline void gpio_line_set(u8 line, int value)
++{
++	if (line < 32) {
++		if (value)
++			__raw_writel((1 << line), CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_SET);
++		else
++			__raw_writel((1 << line), CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_CLEAR);
++	} else {
++		if (value)
++			__raw_writel((1 << line), CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_SET);
++		else
++			__raw_writel((1 << line), CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_CLEAR);
++	}
++}
++
++static inline int gpio_get_value(unsigned gpio)
++{
++	if (gpio < NR_BUILTIN_GPIO)
++	{
++		int value;
++		gpio_line_get(gpio, &value);
++		return value;
++	}
++	else
++		return __gpio_get_value(gpio);
++}
++
++static inline void gpio_set_value(unsigned gpio, int value)
++{
++	if (gpio < NR_BUILTIN_GPIO)
++		gpio_line_set(gpio, value);
++	else
++		__gpio_set_value(gpio, value);
++}
++
++#define gpio_cansleep __gpio_cansleep
++
++extern int gpio_to_irq(int gpio);
++extern int irq_to_gpio(int gpio);
++
++#endif
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,6 +1,7 @@
+ obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
+ obj-$(CONFIG_PCI)			+= pcie.o
+ obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
++obj-$(CONFIG_MACH_GW2388)		+= laguna.o
+ obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+ obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+ obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -365,7 +365,7 @@ static int cns3xxx_pcie_abort_handler(un
+ 	return 0;
+ }
+ 
+-static int __init cns3xxx_pcie_init(void)
++int cns3xxx_pcie_init(u8 bitmap)
+ {
+ 	int i;
+ 
+@@ -376,6 +376,9 @@ static int __init cns3xxx_pcie_init(void
+ 			"imprecise external abort");
+ 
+ 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
++		if (!(bitmap & (1 << i)))
++			continue;
++
+ 		iotable_init(cns3xxx_pcie[i].cfg_bases,
+ 			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
+ 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+@@ -387,4 +390,3 @@ static int __init cns3xxx_pcie_init(void
+ 
+ 	return 0;
+ }
+-device_initcall(cns3xxx_pcie_init);
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -32,6 +32,7 @@
+ #include <asm/mach/time.h>
+ #include <mach/cns3xxx.h>
+ #include <mach/irqs.h>
++#include <mach/platform.h>
+ #include "core.h"
+ #include "devices.h"
+ 
+@@ -199,6 +200,8 @@ static void __init cns3420_init(void)
+ 	cns3xxx_ahci_init();
+ 	cns3xxx_sdhci_init();
+ 
++	cns3xxx_pcie_init(0x3);
++
+ 	pm_power_off = cns3xxx_power_off;
+ }
+ 
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -12,6 +12,7 @@
+ #define __CNS3XXX_CORE_H
+ 
+ extern struct sys_timer cns3xxx_timer;
++extern int cns3xxx_pcie_init(u8 bitmap);
+ 
+ #ifdef CONFIG_CACHE_L2X0
+ void __init cns3xxx_l2x0_init(void);
diff --git a/target/linux/cns3xxx/patches-3.3/101-laguna_sdhci_card_detect.patch b/target/linux/cns3xxx/patches-3.3/101-laguna_sdhci_card_detect.patch
new file mode 100644
index 0000000000..444c5d529c
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/101-laguna_sdhci_card_detect.patch
@@ -0,0 +1,16 @@
+--- a/drivers/mmc/host/sdhci-cns3xxx.c
++++ b/drivers/mmc/host/sdhci-cns3xxx.c
+@@ -89,10 +89,11 @@ static struct sdhci_pltfm_data sdhci_cns
+ 	.ops = &sdhci_cns3xxx_ops,
+ 	.quirks = SDHCI_QUIRK_BROKEN_DMA |
+ 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+-		  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
++		  //SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ 		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+-		  SDHCI_QUIRK_NONSTANDARD_CLOCK,
++		  SDHCI_QUIRK_NONSTANDARD_CLOCK |
++		  SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ };
+ 
+ static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev)
diff --git a/target/linux/cns3xxx/patches-3.3/102-cns3xxx_timers.patch b/target/linux/cns3xxx/patches-3.3/102-cns3xxx_timers.patch
new file mode 100644
index 0000000000..9adf007b27
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/102-cns3xxx_timers.patch
@@ -0,0 +1,109 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -125,12 +125,13 @@ static void cns3xxx_timer_set_mode(enum
+ 
+ 	switch (mode) {
+ 	case CLOCK_EVT_MODE_PERIODIC:
+-		reload = pclk * 20 / (3 * HZ) * 0x25000;
++		reload = pclk * 1000000 / HZ;
+ 		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ 		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
+ 		break;
+ 	case CLOCK_EVT_MODE_ONESHOT:
+ 		/* period set, and timer enabled in 'next_event' hook */
++		writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ 		ctrl |= (1 << 2) | (1 << 9);
+ 		break;
+ 	case CLOCK_EVT_MODE_UNUSED:
+@@ -155,11 +156,11 @@ static int cns3xxx_timer_set_next_event(
+ 
+ static struct clock_event_device cns3xxx_tmr1_clockevent = {
+ 	.name		= "cns3xxx timer1",
+-	.shift		= 8,
++	.shift		= 32,
+ 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ 	.set_mode	= cns3xxx_timer_set_mode,
+ 	.set_next_event	= cns3xxx_timer_set_next_event,
+-	.rating		= 350,
++	.rating		= 300,
+ 	.cpumask	= cpu_all_mask,
+ };
+ 
+@@ -201,6 +202,35 @@ static struct irqaction cns3xxx_timer_ir
+ 	.handler	= cns3xxx_timer_interrupt,
+ };
+ 
++static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
++{
++  u64 val;
++
++  val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++  val &= 0xffff;
++
++  return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
++}
++
++static struct clocksource clocksource_cns3xxx = {
++	.name = "freerun",
++	.rating = 200,
++	.read = cns3xxx_get_cycles,
++	.mask = CLOCKSOURCE_MASK(48),
++	.shift  = 16,
++	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++static void __init cns3xxx_clocksource_init(void)
++{
++	/* Reset the FreeRunning counter */
++	writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++
++	clocksource_cns3xxx.mult =
++		clocksource_khz2mult(100, clocksource_cns3xxx.shift);
++	clocksource_register(&clocksource_cns3xxx);
++}
++
+ /*
+  * Set up the clock source and clock events devices
+  */
+@@ -218,13 +248,12 @@ static void __init __cns3xxx_timer_init(
+ 	/* stop free running timer3 */
+ 	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
+ 
+-	/* timer1 */
+-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
+-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+-
+ 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
+ 	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
+ 
++	val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
++	writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
++
+ 	/* mask irq, non-mask timer1 overflow */
+ 	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+ 	irq_mask &= ~(1 << 2);
+@@ -236,23 +265,9 @@ static void __init __cns3xxx_timer_init(
+ 	val |= (1 << 9);
+ 	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+ 
+-	/* timer2 */
+-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
+-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
+-
+-	/* mask irq */
+-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
+-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+-
+-	/* down counter */
+-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+-	val |= (1 << 10);
+-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+-
+-	/* Make irqs happen for the system timer */
+ 	setup_irq(timer_irq, &cns3xxx_timer_irq);
+ 
++	cns3xxx_clocksource_init();
+ 	cns3xxx_clockevents_init(timer_irq);
+ }
+ 
diff --git a/target/linux/cns3xxx/patches-3.3/104-cns3xxx_gpio.patch b/target/linux/cns3xxx/patches-3.3/104-cns3xxx_gpio.patch
new file mode 100644
index 0000000000..c5928e5e33
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/104-cns3xxx_gpio.patch
@@ -0,0 +1,118 @@
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -216,7 +216,7 @@ static struct map_desc cns3420_io_desc[]
+ 
+ static void __init cns3420_map_io(void)
+ {
+-	cns3xxx_map_io();
++	cns3xxx_common_init();
+ 	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
+ 
+ 	cns3420_early_serial_setup();
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -21,6 +21,7 @@
+ #include <asm/hardware/gic.h>
+ #include <asm/smp_twd.h>
+ #include <asm/hardware/cache-l2x0.h>
++#include <asm/gpio.h>
+ #include <mach/cns3xxx.h>
+ #include "core.h"
+ 
+@@ -82,12 +83,73 @@ static struct map_desc cns3xxx_io_desc[]
+ 	},
+ };
+ 
+-void __init cns3xxx_map_io(void)
++static inline void gpio_line_config(u8 line, u32 direction)
++{
++	u32 reg;
++	if (direction) {
++		if (line < 32) {
++			reg = __raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
++			reg |= (1 << line);
++			__raw_writel(reg, CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
++		} else {
++			reg = __raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
++			reg |= (1 << (line - 32));
++			__raw_writel(reg, CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
++		}
++	} else {
++		if (line < 32) {
++			reg = __raw_readl(CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
++			reg &= ~(1 << line);
++			__raw_writel(reg, CNS3XXX_GPIOA_BASE_VIRT + CNS3XXX_GPIO_DIR);
++		} else {
++			reg = __raw_readl(CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
++			reg &= ~(1 << (line - 32));
++			__raw_writel(reg, CNS3XXX_GPIOB_BASE_VIRT + CNS3XXX_GPIO_DIR);
++		}
++	}
++}
++
++static int cns3xxx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++{
++	gpio_line_config(gpio, CNS3XXX_GPIO_IN);
++	return 0;
++}
++
++static int cns3xxx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
++{
++	gpio_line_set(gpio, level);
++	gpio_line_config(gpio, CNS3XXX_GPIO_OUT);
++	return 0;
++}
++
++static int cns3xxx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
++{
++	return gpio_get_value(gpio);
++}
++
++static void cns3xxx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
++{
++	gpio_set_value(gpio, value);
++}
++
++static struct gpio_chip cns3xxx_gpio_chip = {
++	.label			= "CNS3XXX_GPIO_CHIP",
++	.direction_input	= cns3xxx_gpio_direction_input,
++	.direction_output	= cns3xxx_gpio_direction_output,
++	.get			= cns3xxx_gpio_get_value,
++	.set			= cns3xxx_gpio_set_value,
++	.base			= 0,
++	.ngpio			= 64,
++};
++
++void __init cns3xxx_common_init(void)
+ {
+ #ifdef CONFIG_LOCAL_TIMERS
+ 	twd_base = (void __iomem *) CNS3XXX_TC11MP_TWD_BASE_VIRT;
+ #endif
+ 	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
++
++	gpiochip_add(&cns3xxx_gpio_chip);
+ }
+ 
+ /* used by entry-macro.S */
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -20,7 +20,7 @@ void __init cns3xxx_l2x0_init(void);
+ static inline void cns3xxx_l2x0_init(void) {}
+ #endif /* CONFIG_CACHE_L2X0 */
+ 
+-void __init cns3xxx_map_io(void);
++void __init cns3xxx_common_init(void);
+ void __init cns3xxx_init_irq(void);
+ void cns3xxx_power_off(void);
+ void cns3xxx_restart(char, const char *);
+--- a/arch/arm/mach-cns3xxx/laguna.c
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -611,7 +611,7 @@ static struct map_desc laguna_io_desc[]
+ 
+ static void __init laguna_map_io(void)
+ {
+-	cns3xxx_map_io();
++	cns3xxx_common_init();
+ 	iotable_init(laguna_io_desc, ARRAY_SIZE(laguna_io_desc));
+ 	laguna_early_serial_setup();
+ }
diff --git a/target/linux/cns3xxx/patches-3.3/105-cns3xxx_pcie_io.patch b/target/linux/cns3xxx/patches-3.3/105-cns3xxx_pcie_io.patch
new file mode 100644
index 0000000000..e7fe0b1e1e
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/105-cns3xxx_pcie_io.patch
@@ -0,0 +1,88 @@
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -80,6 +80,16 @@ static struct map_desc cns3xxx_io_desc[]
+ 		.pfn		= __phys_to_pfn(CNS3XXX_SSP_BASE),
+ 		.length		= SZ_4K,
+ 		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_PCIE0_IO_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
++		.length		= SZ_16M,
++		.type		= MT_DEVICE,
++	}, {
++		.virtual	= CNS3XXX_PCIE1_IO_BASE_VIRT,
++		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
++		.length		= SZ_16M,
++		.type		= MT_DEVICE,
+ 	},
+ };
+ 
+@@ -155,13 +165,13 @@ void __init cns3xxx_common_init(void)
+ /* used by entry-macro.S */
+ void __init cns3xxx_init_irq(void)
+ {
+-	gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
+-		 __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
++	gic_init(0, 29, (void __iomem *) CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
++		 (void __iomem *) CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
+ }
+ 
+ void cns3xxx_power_off(void)
+ {
+-	u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT);
++	u32 __iomem *pm_base = (void __iomem *) CNS3XXX_PM_BASE_VIRT;
+ 	u32 clkctrl;
+ 
+ 	printk(KERN_INFO "powering system down...\n");
+@@ -335,7 +345,7 @@ static void __init __cns3xxx_timer_init(
+ 
+ static void __init cns3xxx_timer_init(void)
+ {
+-	cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT);
++	cns3xxx_tmr1 = (void __iomem *) CNS3XXX_TIMER1_2_3_BASE_VIRT;
+ 
+ 	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
+ }
+--- a/arch/arm/mach-cns3xxx/devices.c
++++ b/arch/arm/mach-cns3xxx/devices.c
+@@ -98,7 +98,7 @@ static struct platform_device cns3xxx_sd
+ 
+ void __init cns3xxx_sdhci_init(void)
+ {
+-	u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014);
++	u32 __iomem *gpioa = (void __iomem *) (CNS3XXX_MISC_BASE_VIRT + 0x0014);
+ 	u32 gpioa_pins = __raw_readl(gpioa);
+ 
+ 	/* MMC/SD pins share with GPIOA */
+--- a/arch/arm/mach-cns3xxx/include/mach/io.h
++++ b/arch/arm/mach-cns3xxx/include/mach/io.h
+@@ -9,9 +9,17 @@
+ #ifndef __MACH_IO_H
+ #define __MACH_IO_H
+ 
++#include "cns3xxx.h"
++
+ #define IO_SPACE_LIMIT 0xffffffff
+ 
+-#define __io(a)			__typesafe_io(a)
++static inline void __iomem *__io(unsigned long addr)
++{
++	return (void __iomem *)((addr - CNS3XXX_PCIE0_IO_BASE)
++		+ CNS3XXX_PCIE0_IO_BASE_VIRT);
++}
++
++#define __io(a)			__io(a)
+ #define __mem_pci(a)		(a)
+ 
+ #endif
+--- a/drivers/spi/spi_cns3xxx.c
++++ b/drivers/spi/spi_cns3xxx.c
+@@ -273,7 +273,7 @@ done:
+ 
+ static void __init cns3xxx_spi_initial(void)
+ {
+-	u32 __iomem *gpiob = __io(CNS3XXX_MISC_BASE_VIRT + 0x0018);
++	u32 __iomem *gpiob = (void __iomem *) (CNS3XXX_MISC_BASE_VIRT + 0x0018);
+ 	u32 gpiob_pins = __raw_readl(gpiob);
+ 
+ 	/* MMC/SD pins share with GPIOA */
diff --git a/target/linux/cns3xxx/patches-3.3/106-cns3xxx_sata_support.patch b/target/linux/cns3xxx/patches-3.3/106-cns3xxx_sata_support.patch
new file mode 100644
index 0000000000..e614385484
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/106-cns3xxx_sata_support.patch
@@ -0,0 +1,97 @@
+--- a/arch/arm/mach-cns3xxx/devices.c
++++ b/arch/arm/mach-cns3xxx/devices.c
+@@ -41,7 +41,7 @@ static struct resource cns3xxx_ahci_reso
+ static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+ 
+ static struct platform_device cns3xxx_ahci_pdev = {
+-	.name		= "ahci",
++	.name		= "ahci-cns3xxx",
+ 	.id		= 0,
+ 	.resource	= cns3xxx_ahci_resource,
+ 	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -27,6 +27,7 @@ enum ahci_type {
+ 	AHCI,		/* standard platform ahci */
+ 	IMX53_AHCI,	/* ahci on i.mx53 */
+ 	STRICT_AHCI,	/* delayed DMA engine start */
++	CNS3XXX_AHCI,	/* AHCI on cns3xxx */
+ };
+ 
+ static struct platform_device_id ahci_devtype[] = {
+@@ -40,11 +41,32 @@ static struct platform_device_id ahci_de
+ 		.name = "strict-ahci",
+ 		.driver_data = STRICT_AHCI,
+ 	}, {
++		.name = "ahci-cns3xxx",
++		.driver_data = CNS3XXX_AHCI,
++	}, {
+ 		/* sentinel */
+ 	}
+ };
+ MODULE_DEVICE_TABLE(platform, ahci_devtype);
+ 
++static int
++cns3xxx_ahci_softreset(struct ata_link *link, unsigned int *class,
++		       unsigned long deadline)
++{
++	int pmp = sata_srst_pmp(link);
++	int ret;
++
++	ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
++	if (pmp && ret)
++		return ahci_do_softreset(link, class, 0, deadline,
++			ahci_check_ready);
++	return ret;
++}
++
++static struct ata_port_operations cns3xxx_ahci_ops = {
++	.inherits		= &ahci_ops,
++	.softreset		= cns3xxx_ahci_softreset,
++};
+ 
+ static const struct ata_port_info ahci_port_info[] = {
+ 	/* by features */
+@@ -67,13 +89,19 @@ static const struct ata_port_info ahci_p
+ 		.udma_mask	= ATA_UDMA6,
+ 		.port_ops	= &ahci_ops,
+ 	},
++	[CNS3XXX_AHCI] = {
++		.flags		= AHCI_FLAG_COMMON,
++		.pio_mask	= ATA_PIO4,
++		.udma_mask	= ATA_UDMA6,
++		.port_ops	= &cns3xxx_ahci_ops,
++	}
+ };
+ 
+ static struct scsi_host_template ahci_platform_sht = {
+ 	AHCI_SHT("ahci_platform"),
+ };
+ 
+-static int __init ahci_probe(struct platform_device *pdev)
++static int __devinit ahci_probe(struct platform_device *pdev)
+ {
+ 	struct device *dev = &pdev->dev;
+ 	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+@@ -285,6 +313,7 @@ static const struct of_device_id ahci_of
+ MODULE_DEVICE_TABLE(of, ahci_of_match);
+ 
+ static struct platform_driver ahci_driver = {
++	.probe = ahci_probe,
+ 	.remove = __devexit_p(ahci_remove),
+ 	.driver = {
+ 		.name = "ahci",
+@@ -299,7 +328,7 @@ static struct platform_driver ahci_drive
+ 
+ static int __init ahci_init(void)
+ {
+-	return platform_driver_probe(&ahci_driver, ahci_probe);
++	return platform_driver_register(&ahci_driver);
+ }
+ module_init(ahci_init);
+ 
+@@ -312,4 +341,3 @@ module_exit(ahci_exit);
+ MODULE_DESCRIPTION("AHCI SATA platform driver");
+ MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+ MODULE_LICENSE("GPL");
+-MODULE_ALIAS("platform:ahci");
diff --git a/target/linux/cns3xxx/patches-3.3/107-cns3xxx_pcie-section-mismatch-fixes.patch b/target/linux/cns3xxx/patches-3.3/107-cns3xxx_pcie-section-mismatch-fixes.patch
new file mode 100644
index 0000000000..d9095c79f8
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/107-cns3xxx_pcie-section-mismatch-fixes.patch
@@ -0,0 +1,26 @@
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -161,12 +161,12 @@ static int cns3xxx_pci_setup(int nr, str
+ 	return 1;
+ }
+ 
+-static struct pci_ops cns3xxx_pcie_ops = {
++struct pci_ops cns3xxx_pcie_ops = {
+ 	.read = cns3xxx_pci_read_config,
+ 	.write = cns3xxx_pci_write_config,
+ };
+ 
+-static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
++struct pci_bus * __devinit cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+ 	return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys,
+ 				 &sys->resources);
+@@ -365,7 +365,7 @@ static int cns3xxx_pcie_abort_handler(un
+ 	return 0;
+ }
+ 
+-int cns3xxx_pcie_init(u8 bitmap)
++int __init cns3xxx_pcie_init(u8 bitmap)
+ {
+ 	int i;
+ 
diff --git a/target/linux/cns3xxx/patches-3.3/110-gateworks_gsp_support.patch b/target/linux/cns3xxx/patches-3.3/110-gateworks_gsp_support.patch
new file mode 100644
index 0000000000..02fbdab6d2
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/110-gateworks_gsp_support.patch
@@ -0,0 +1,339 @@
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -423,6 +423,15 @@ config SENSORS_GL520SM
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called gl520sm.
+ 
++config SENSORS_GSP
++	tristate "Gateworks System Peripheral"
++	depends on I2C && EXPERIMENTAL
++	help
++	  If you say yes here you get support for the Gateworks System Peripherals.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called gsp.
++
+ config SENSORS_GPIO_FAN
+ 	tristate "GPIO fan"
+ 	depends on GENERIC_GPIO
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -125,6 +125,7 @@ obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l7
+ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
+ obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
+ obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
++obj-$(CONFIG_SENSORS_GSP)	+= gsp.o
+ 
+ obj-$(CONFIG_PMBUS)		+= pmbus/
+ 
+--- /dev/null
++++ b/drivers/hwmon/gsp.c
+@@ -0,0 +1,308 @@
++/*
++ * A hwmon driver for the Gateworks System Peripheral
++ * Copyright (C) 2009 Gateworks Corporation
++ *
++ * Author: Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License,
++ * as published by the Free Software Foundation - version 2.
++ */
++
++#include <linux/module.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++
++#define DRV_VERSION "0.2"
++
++enum chips { gsp };
++
++/* AD7418 registers */
++#define GSP_REG_TEMP_IN		0x00
++#define GSP_REG_VIN		0x02
++#define GSP_REG_3P3		0x05
++#define GSP_REG_BAT		0x08
++#define GSP_REG_5P0		0x0b
++#define GSP_REG_CORE		0x0e
++#define GSP_REG_CPU1		0x11
++#define GSP_REG_CPU2		0x14
++#define GSP_REG_DRAM		0x17
++#define GSP_REG_EXT_BAT		0x1a
++#define GSP_REG_IO1		0x1d
++#define GSP_REG_IO2 		0x20
++#define GSP_REG_PCIE		0x23
++#define GSP_REG_CURRENT		0x26
++#define GSP_FAN_0		0x2C
++#define GSP_FAN_1		0x2E
++#define GSP_FAN_2		0x30
++#define GSP_FAN_3		0x32
++#define GSP_FAN_4		0x34
++#define GSP_FAN_5		0x36
++
++struct gsp_sensor_info {
++	const char* name;
++	int reg;
++};
++
++static const struct gsp_sensor_info gsp_sensors[] = {
++	{"temp", GSP_REG_TEMP_IN},
++	{"vin", GSP_REG_VIN},
++	{"3p3", GSP_REG_3P3},
++	{"bat", GSP_REG_BAT},
++	{"5p0", GSP_REG_5P0},
++	{"core", GSP_REG_CORE},
++	{"cpu1", GSP_REG_CPU1},
++	{"cpu2", GSP_REG_CPU2},
++	{"dram", GSP_REG_DRAM},
++	{"ext_bat", GSP_REG_EXT_BAT},
++	{"io1", GSP_REG_IO1},
++	{"io2", GSP_REG_IO2},
++	{"pci2", GSP_REG_PCIE},
++	{"current", GSP_REG_CURRENT},
++	{"fan_point0", GSP_FAN_0},
++	{"fan_point1", GSP_FAN_1},
++	{"fan_point2", GSP_FAN_2},
++	{"fan_point3", GSP_FAN_3},
++	{"fan_point4", GSP_FAN_4},
++	{"fan_point5", GSP_FAN_5},
++};
++
++struct gsp_data {
++	struct device		*hwmon_dev;
++	struct attribute_group	attrs;
++	enum chips		type;
++};
++
++static int gsp_probe(struct i2c_client *client,
++			const struct i2c_device_id *id);
++static int gsp_remove(struct i2c_client *client);
++
++static const struct i2c_device_id gsp_id[] = {
++	{ "gsp", 0 },
++	{ }
++};
++MODULE_DEVICE_TABLE(i2c, gsp_id);
++
++static struct i2c_driver gsp_driver = {
++	.driver = {
++		.name	= "gsp",
++	},
++	.probe		= gsp_probe,
++	.remove		= gsp_remove,
++	.id_table	= gsp_id,
++};
++
++/* All registers are word-sized, except for the configuration registers.
++ * AD7418 uses a high-byte first convention. Do NOT use those functions to
++ * access the configuration registers CONF and CONF2, as they are byte-sized.
++ */
++static inline int gsp_read(struct i2c_client *client, u8 reg)
++{
++	unsigned int adc = 0;
++	if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT)
++	{
++		adc |= i2c_smbus_read_byte_data(client, reg);
++		adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++		return adc;
++	}
++	else
++	{
++		adc |= i2c_smbus_read_byte_data(client, reg);
++		adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
++		adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16;
++		return adc;
++	}
++}
++
++static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value)
++{
++	i2c_smbus_write_byte_data(client, reg, value & 0xff);
++	i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff));
++	return 1;
++}
++
++static ssize_t show_adc(struct device *dev, struct device_attribute *devattr,
++			char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++	struct i2c_client *client = to_i2c_client(dev);
++	return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg));
++}
++
++static ssize_t show_label(struct device *dev,
++			struct device_attribute *devattr, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++
++	return sprintf(buf, "%s\n", gsp_sensors[attr->index].name);
++}
++
++static ssize_t store_fan(struct device *dev,
++			struct device_attribute *devattr, const char *buf, size_t count)
++{
++	u16 val;
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
++	struct i2c_client *client = to_i2c_client(dev);
++	val = simple_strtoul(buf, NULL, 10);
++	gsp_write(client, gsp_sensors[attr->index].reg, val);
++	return count;
++}
++
++static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0);
++static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0);
++
++static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1);
++static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2);
++static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3);
++static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4);
++static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4);
++static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5);
++static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5);
++static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6);
++static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6);
++static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7);
++static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7);
++static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8);
++static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8);
++static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9);
++static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9);
++static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10);
++static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10);
++static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11);
++static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11);
++static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12);
++static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12);
++static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13);
++static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13);
++
++static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14);
++static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15);
++static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16);
++static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17);
++static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18);
++static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19);
++
++static struct attribute *gsp_attributes[] = {
++	&sensor_dev_attr_temp0_input.dev_attr.attr,
++	&sensor_dev_attr_in0_input.dev_attr.attr,
++	&sensor_dev_attr_in1_input.dev_attr.attr,
++	&sensor_dev_attr_in2_input.dev_attr.attr,
++	&sensor_dev_attr_in3_input.dev_attr.attr,
++	&sensor_dev_attr_in4_input.dev_attr.attr,
++	&sensor_dev_attr_in5_input.dev_attr.attr,
++	&sensor_dev_attr_in6_input.dev_attr.attr,
++	&sensor_dev_attr_in7_input.dev_attr.attr,
++	&sensor_dev_attr_in8_input.dev_attr.attr,
++	&sensor_dev_attr_in9_input.dev_attr.attr,
++	&sensor_dev_attr_in10_input.dev_attr.attr,
++	&sensor_dev_attr_in11_input.dev_attr.attr,
++	&sensor_dev_attr_in12_input.dev_attr.attr,
++
++	&sensor_dev_attr_temp0_label.dev_attr.attr,
++	&sensor_dev_attr_in0_label.dev_attr.attr,
++	&sensor_dev_attr_in1_label.dev_attr.attr,
++	&sensor_dev_attr_in2_label.dev_attr.attr,
++	&sensor_dev_attr_in3_label.dev_attr.attr,
++	&sensor_dev_attr_in4_label.dev_attr.attr,
++	&sensor_dev_attr_in5_label.dev_attr.attr,
++	&sensor_dev_attr_in6_label.dev_attr.attr,
++	&sensor_dev_attr_in7_label.dev_attr.attr,
++	&sensor_dev_attr_in8_label.dev_attr.attr,
++	&sensor_dev_attr_in9_label.dev_attr.attr,
++	&sensor_dev_attr_in10_label.dev_attr.attr,
++	&sensor_dev_attr_in11_label.dev_attr.attr,
++	&sensor_dev_attr_in12_label.dev_attr.attr,
++
++	&sensor_dev_attr_fan0_point0.dev_attr.attr,
++	&sensor_dev_attr_fan0_point1.dev_attr.attr,
++	&sensor_dev_attr_fan0_point2.dev_attr.attr,
++	&sensor_dev_attr_fan0_point3.dev_attr.attr,
++	&sensor_dev_attr_fan0_point4.dev_attr.attr,
++	&sensor_dev_attr_fan0_point5.dev_attr.attr,
++	NULL
++};
++
++
++static int gsp_probe(struct i2c_client *client,
++			 const struct i2c_device_id *id)
++{
++	struct i2c_adapter *adapter = client->adapter;
++	struct gsp_data *data;
++	int err;
++
++	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
++					I2C_FUNC_SMBUS_WORD_DATA)) {
++		err = -EOPNOTSUPP;
++		goto exit;
++	}
++
++	if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) {
++		err = -ENOMEM;
++		goto exit;
++	}
++
++	i2c_set_clientdata(client, data);
++
++	data->type = id->driver_data;
++
++	switch (data->type) {
++	case 0:
++		data->attrs.attrs = gsp_attributes;
++		break;
++	}
++
++	dev_info(&client->dev, "%s chip found\n", client->name);
++
++	/* Register sysfs hooks */
++	if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
++		goto exit_free;
++
++	data->hwmon_dev = hwmon_device_register(&client->dev);
++	if (IS_ERR(data->hwmon_dev)) {
++		err = PTR_ERR(data->hwmon_dev);
++		goto exit_remove;
++	}
++
++	return 0;
++
++exit_remove:
++	sysfs_remove_group(&client->dev.kobj, &data->attrs);
++exit_free:
++	kfree(data);
++exit:
++	return err;
++}
++
++static int gsp_remove(struct i2c_client *client)
++{
++	struct gsp_data *data = i2c_get_clientdata(client);
++	hwmon_device_unregister(data->hwmon_dev);
++	sysfs_remove_group(&client->dev.kobj, &data->attrs);
++	kfree(data);
++	return 0;
++}
++
++static int __init gsp_init(void)
++{
++	return i2c_add_driver(&gsp_driver);
++}
++
++static void __exit gsp_exit(void)
++{
++	i2c_del_driver(&gsp_driver);
++}
++
++module_init(gsp_init);
++module_exit(gsp_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("GSP HWMON driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
diff --git a/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch b/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch
new file mode 100644
index 0000000000..b53e508df3
--- /dev/null
+++ b/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch
@@ -0,0 +1,22702 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -70,6 +70,7 @@ obj-$(CONFIG_PARIDE) 		+= block/paride/
+ obj-$(CONFIG_TC)		+= tc/
+ obj-$(CONFIG_UWB)		+= uwb/
+ obj-$(CONFIG_USB_OTG_UTILS)	+= usb/
++obj-$(CONFIG_USB_DWC_OTG)	+= usb/dwc/
+ obj-$(CONFIG_USB)		+= usb/
+ obj-$(CONFIG_PCI)		+= usb/
+ obj-$(CONFIG_USB_GADGET)	+= usb/
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -134,6 +134,8 @@ source "drivers/usb/musb/Kconfig"
+ 
+ source "drivers/usb/renesas_usbhs/Kconfig"
+ 
++source "drivers/usb/dwc/Kconfig"
++
+ source "drivers/usb/class/Kconfig"
+ 
+ source "drivers/usb/storage/Kconfig"
+--- /dev/null
++++ b/drivers/usb/dwc/Kconfig
+@@ -0,0 +1,44 @@
++#
++# USB Dual Role (OTG-ready) Controller Drivers
++# for silicon based on Synopsys DesignWare IP
++#
++
++comment "Enable Host or Gadget support for DesignWare OTG controller"
++depends on !USB && USB_GADGET=n
++
++config USB_DWC_OTG
++	tristate "Synopsys DWC OTG Controller"
++	depends on USB
++	help
++	   This driver provides USB Device Controller support for the
++	   Synopsys DesignWare USB OTG Core used on the Cavium CNS34xx SOC.
++
++config DWC_DEBUG
++	bool "Enable DWC Debugging"
++	depends on USB_DWC_OTG
++	default n
++	help
++	   Enable DWC driver debugging
++
++choice
++	prompt "DWC Mode Selection"
++	depends on USB_DWC_OTG
++	default DWC_HOST_ONLY
++	help
++	   Select the DWC Core in OTG, Host only, or Device only mode.
++
++config DWC_HOST_ONLY
++	bool "DWC Host Only Mode"
++
++config DWC_OTG_MODE
++	bool "DWC OTG Mode"
++	select USB_GADGET
++	select USB_GADGET_SELECTED
++
++config DWC_DEVICE_ONLY
++	bool "DWC Device Only Mode"
++	select USB_GADGET
++	select USB_GADGET_SELECTED
++
++endchoice
++
+--- /dev/null
++++ b/drivers/usb/dwc/Makefile
+@@ -0,0 +1,26 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++EXTRA_CFLAGS	+= -DDWC_HS_ELECT_TST
++#EXTRA_CFLAGS	+= -Dlinux -DDWC_HS_ELECT_TST
++#EXTRA_CFLAGS	+= -DDWC_EN_ISOC
++
++ifneq ($(CONFIG_DWC_HOST_ONLY),)
++EXTRA_CFLAGS    += -DDWC_HOST_ONLY
++endif
++
++ifneq ($(CONFIG_DWC_DEVICE_ONLY),)
++EXTRA_CFLAGS    += -DDWC_DEVICE_ONLY
++endif
++
++ifneq ($(CONFIG_DWC_DEBUG),)
++EXTRA_CFLAGS	+= -DDEBUG
++endif
++
++obj-$(CONFIG_USB_DWC_OTG)	:= dwc_otg.o
++
++dwc_otg-objs	:= otg_driver.o otg_attr.o
++dwc_otg-objs	+= otg_cil.o otg_cil_intr.o
++dwc_otg-objs	+= otg_pcd.o otg_pcd_intr.o
++dwc_otg-objs	+= otg_hcd.o otg_hcd_intr.o otg_hcd_queue.o
+--- /dev/null
++++ b/drivers/usb/dwc/otg_attr.c
+@@ -0,0 +1,886 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: #31 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>  /* permission constants */
++#include <linux/version.h>
++
++#include <asm/sizes.h>
++#include <asm/io.h>
++#include <asm/sizes.h>
++
++#include "otg_plat.h"
++#include "otg_attr.h"
++#include "otg_driver.h"
++#include "otg_pcd.h"
++#include "otg_hcd.h"
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	val = (val & (_mask_)) >> _shift_; \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	uint32_t clear = set; \
++	clear = ((~clear) << _shift_) & _mask_; \
++	set = (set << _shift_) & _mask_; \
++	dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++	dwc_modify_reg32(_addr_, clear, set); \
++	return count; \
++}
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t val; \
++	val = dwc_read_reg32 (_addr_); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++	dwc_write_reg32(_addr_, val); \
++	return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev,
++			       struct device_attribute *attr,
++			       char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev,
++				struct device_attribute *attr,
++				const char *buf,
++				size_t count )
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x\n", offset);
++	if (offset < SZ_256K ) {
++		otg_dev->reg_offset = offset;
++	}
++	else {
++		dev_err( _dev, "invalid offset\n" );
++	}
++
++	return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
++
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev,
++			      struct device_attribute *attr,
++			      char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t val;
++	volatile uint32_t *addr;
++
++	if (otg_dev->reg_offset != 0xFFFFFFFF &&
++	    0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset +
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++		val = dwc_read_reg32( addr );
++		return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++				"Reg@0x%06x = 0x%08x\n",
++				otg_dev->reg_offset, val);
++	}
++	else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n",
++			otg_dev->reg_offset);
++		return sprintf(buf, "invalid offset\n" );
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store( struct device *_dev,
++			       struct device_attribute *attr,
++			       const char *buf,
++			       size_t count )
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	volatile uint32_t * addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++		/* Calculate the address */
++		addr = (uint32_t*)(otg_dev->reg_offset +
++				   (uint8_t*)otg_dev->base);
++		//dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++		dwc_write_reg32( addr, val );
++	}
++	else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++			otg_dev->reg_offset);
++	}
++	return count;
++}
++DEVICE_ATTR(regvalue,  S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev,
++			 struct device_attribute *attr,
++			 char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev,
++			  struct device_attribute *attr,
++			  const char *buf,
++			  size_t count )
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.hnpreq = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev,
++			 struct device_attribute *attr,
++			 char *buf)
++{
++#ifndef DWC_HOST_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	gotgctl_data_t val;
++	val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++	return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev,
++			  struct device_attribute *attr,
++			  const char *buf,
++			  size_t count )
++{
++#ifndef DWC_HOST_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev,
++			      struct device_attribute *attr,
++			      char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev,
++			       struct device_attribute *attr,
++			       const char *buf,
++			       size_t count )
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtpwr = on;
++
++	//dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++
++	return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev,
++				struct device_attribute *attr,
++				char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	hprt0_data_t val;
++	val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++	return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf,
++				 size_t count )
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++	hprt0_data_t mem;
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.prtsusp = in;
++	dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++	dwc_write_reg32(addr, mem.d32);
++	return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev,
++				   struct device_attribute *attr,
++				   char *buf)
++{
++#ifndef DWC_HOST_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	dctl_data_t val;
++	val.d32 =
++		dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++	return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
++			val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store( struct device *_dev,
++				    struct device_attribute *attr,
++				    const char *buf,
++				    size_t count )
++{
++#ifndef DWC_HOST_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	if (val&1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	}
++	else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif
++	return count;
++}
++DEVICE_ATTR(remote_wakeup,  S_IRUGO|S_IWUSR, remote_wakeup_show,
++	    remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev,
++			     struct device_attribute *attr,
++			     char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++        dwc_otg_dump_global_registers( otg_dev->core_if);
++        if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++                dwc_otg_dump_host_registers( otg_dev->core_if);
++        } else {
++                dwc_otg_dump_dev_registers( otg_dev->core_if);
++
++        }
++   	return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show( struct device *_dev,
++			       struct device_attribute *attr,
++			       char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++        dwc_otg_dump_spram( otg_dev->core_if);
++
++        return sprintf( buf, "SPRAM Dump\n" );
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev,
++			     struct device_attribute *attr,
++			     char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev,
++			       struct device_attribute *attr,
++			       char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++   	return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show( struct device *_dev,
++				 struct device_attribute *attr,
++				 char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev,
++				 struct device_attribute *attr,
++				 char *buf)
++{
++	struct platform_device *pdev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);		\
++	uint32_t reg_val;
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++	}
++	time = jiffies - start_jiffies;
++   	return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++			RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	int error;
++
++	error = device_create_file(dev, &dev_attr_regoffset);
++	error = device_create_file(dev, &dev_attr_regvalue);
++	error = device_create_file(dev, &dev_attr_mode);
++	error = device_create_file(dev, &dev_attr_hnpcapable);
++	error = device_create_file(dev, &dev_attr_srpcapable);
++	error = device_create_file(dev, &dev_attr_hnp);
++	error = device_create_file(dev, &dev_attr_srp);
++	error = device_create_file(dev, &dev_attr_buspower);
++	error = device_create_file(dev, &dev_attr_bussuspend);
++	error = device_create_file(dev, &dev_attr_busconnected);
++	error = device_create_file(dev, &dev_attr_gotgctl);
++	error = device_create_file(dev, &dev_attr_gusbcfg);
++	error = device_create_file(dev, &dev_attr_grxfsiz);
++	error = device_create_file(dev, &dev_attr_gnptxfsiz);
++	error = device_create_file(dev, &dev_attr_gpvndctl);
++	error = device_create_file(dev, &dev_attr_ggpio);
++	error = device_create_file(dev, &dev_attr_guid);
++	error = device_create_file(dev, &dev_attr_gsnpsid);
++	error = device_create_file(dev, &dev_attr_devspeed);
++	error = device_create_file(dev, &dev_attr_enumspeed);
++	error = device_create_file(dev, &dev_attr_hptxfsiz);
++	error = device_create_file(dev, &dev_attr_hprt0);
++	error = device_create_file(dev, &dev_attr_remote_wakeup);
++	error = device_create_file(dev, &dev_attr_regdump);
++	error = device_create_file(dev, &dev_attr_spramdump);
++	error = device_create_file(dev, &dev_attr_hcddump);
++	error = device_create_file(dev, &dev_attr_hcd_frrem);
++	error = device_create_file(dev, &dev_attr_rd_reg_test);
++	error = device_create_file(dev, &dev_attr_wr_reg_test);
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++
++	device_remove_file(dev, &dev_attr_regoffset);
++	device_remove_file(dev, &dev_attr_regvalue);
++	device_remove_file(dev, &dev_attr_mode);
++	device_remove_file(dev, &dev_attr_hnpcapable);
++	device_remove_file(dev, &dev_attr_srpcapable);
++	device_remove_file(dev, &dev_attr_hnp);
++	device_remove_file(dev, &dev_attr_srp);
++	device_remove_file(dev, &dev_attr_buspower);
++	device_remove_file(dev, &dev_attr_bussuspend);
++	device_remove_file(dev, &dev_attr_busconnected);
++	device_remove_file(dev, &dev_attr_gotgctl);
++	device_remove_file(dev, &dev_attr_gusbcfg);
++	device_remove_file(dev, &dev_attr_grxfsiz);
++	device_remove_file(dev, &dev_attr_gnptxfsiz);
++	device_remove_file(dev, &dev_attr_gpvndctl);
++	device_remove_file(dev, &dev_attr_ggpio);
++	device_remove_file(dev, &dev_attr_guid);
++	device_remove_file(dev, &dev_attr_gsnpsid);
++	device_remove_file(dev, &dev_attr_devspeed);
++	device_remove_file(dev, &dev_attr_enumspeed);
++	device_remove_file(dev, &dev_attr_hptxfsiz);
++	device_remove_file(dev, &dev_attr_hprt0);
++	device_remove_file(dev, &dev_attr_remote_wakeup);
++	device_remove_file(dev, &dev_attr_regdump);
++	device_remove_file(dev, &dev_attr_spramdump);
++	device_remove_file(dev, &dev_attr_hcddump);
++	device_remove_file(dev, &dev_attr_hcd_frrem);
++	device_remove_file(dev, &dev_attr_rd_reg_test);
++	device_remove_file(dev, &dev_attr_wr_reg_test);
++}
+--- /dev/null
++++ b/drivers/usb/dwc/otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: #7 $
++ * $Date: 2005/03/28 $
++ * $Change: 477051 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct platform_device *pdev);
++void dwc_otg_attr_remove (struct platform_device *pdev);
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc/otg_cil.c
+@@ -0,0 +1,3831 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: #147 $
++ * $Date: 2008/10/16 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ *	 or macros.
++ *
++ */
++#include <asm/unaligned.h>
++#include <linux/dma-mapping.h>
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "otg_plat.h"
++#include "otg_regs.h"
++#include "otg_cil.h"
++#include "otg_pcd.h"
++
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures.	The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller.	The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers.  The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] reg_base_addr Base address of DWC_otg core registers
++ * @param[in] core_params Pointer to the core configuration parameters
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
++					dwc_otg_core_params_t *core_params)
++{
++	dwc_otg_core_if_t *core_if = 0;
++	dwc_otg_dev_if_t *dev_if = 0;
++	dwc_otg_host_if_t *host_if = 0;
++	uint8_t *reg_base = (uint8_t *)reg_base_addr;
++	int i = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
++
++	core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++
++	if (core_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++		return 0;
++	}
++
++	memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++
++	core_if->core_params = core_params;
++	core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++
++	/*
++	 * Allocate the Device Mode structures.
++	 */
++	dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++
++	if (dev_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++		kfree(core_if);
++		return 0;
++	}
++
++	dev_if->dev_global_regs =
++			(dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++				(reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++				 (i * DWC_EP_REG_OFFSET));
++
++		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++				(reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++				 (i * DWC_EP_REG_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++					i, &dev_if->in_ep_regs[i]->diepctl);
++		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++					i, &dev_if->out_ep_regs[i]->doepctl);
++	}
++
++	dev_if->speed = 0; // unknown
++
++	core_if->dev_if = dev_if;
++
++	/*
++	 * Allocate the Host Mode structures.
++	 */
++	host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++
++	if (host_if == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++		kfree(dev_if);
++		kfree(core_if);
++		return 0;
++	}
++
++	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++			(reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++	host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++				(reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++				 (i * DWC_OTG_CHAN_REGS_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++					i, &host_if->hc_regs[i]->hcchar);
++	}
++
++	host_if->num_host_channels = MAX_EPS_CHANNELS;
++	core_if->host_if = host_if;
++
++	for (i=0; i<MAX_EPS_CHANNELS; i++)
++	{
++		core_if->data_fifo[i] =
++				(uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++							 (i * DWC_OTG_DATA_FIFO_SIZE));
++		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++					i, (unsigned)core_if->data_fifo[i]);
++	}
++
++	core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++	core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++	core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++	core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++	DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++	DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++
++	core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++	core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
++	DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
++
++	DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++	DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++	DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++	DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++	DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++	DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++	DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++	/*
++	 * Set the SRP sucess bit for FS-I2c
++	 */
++	core_if->srp_success = 0;
++	core_if->srp_timer_started = 0;
++
++
++	/*
++	 * Create new workqueue and init works
++	 */
++	core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
++	if(core_if->wq_otg == 0) {
++		DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
++		kfree(host_if);
++		kfree(dev_if);
++		kfree(core_if);
++		return 0 * HZ;
++	}
++	INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
++	INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
++
++	return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param[in] core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
++{
++	/* Disable all interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
++	dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
++
++	if (core_if->wq_otg) {
++		destroy_workqueue(core_if->wq_otg);
++	}
++	if (core_if->dev_if) {
++		kfree(core_if->dev_if);
++	}
++	if (core_if->host_if) {
++		kfree(core_if->host_if);
++	}
++	kfree(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gahbcfg_data_t ahbcfg = { .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gahbcfg_data_t ahbcfg = { .d32 = 0};
++	ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++	dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++
++	/* Clear any pending OTG Interrupts */
++	dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/*
++	 * Enable the interrupts in the GINTMSK.
++	 */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.otgintr = 1;
++
++	if (!core_if->dma_enable) {
++		intr_mask.b.rxstsqlvl = 1;
++	}
++
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++	dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *core_if)
++{
++	uint32_t	val;
++	hcfg_data_t		hcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
++		 (core_if->core_params->ulpi_fs_ls)) ||
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	}
++	else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *core_if)
++{
++	uint32_t	val;
++	dcfg_data_t		dcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		 (core_if->hwcfg2.b.fs_phy_type == 1) &&
++		 (core_if->core_params->ulpi_fs_ls)) ||
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = 0x3;
++	}
++	else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	}
++	else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++	int i;
++
++
++	for(i = 0; i < num_eps; ++i)
++	{
++		if(!(hwcfg1 & 0x1))
++			num_in_eps++;
++
++		hwcfg1 >>= 2;
++	}
++
++	if(core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++
++	return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++	int i;
++
++	for(i = 0; i < num_eps; ++i)
++	{
++		if(!(hwcfg1 & 0x2))
++			num_out_eps++;
++
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	gahbcfg_data_t ahbcfg = { .d32 = 0 };
++	gusbcfg_data_t usbcfg = { .d32 = 0 };
++	gi2cctl_data_t i2cctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
++
++	/* Common Initialization */
++
++	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++//	usbcfg.b.tx_end_delay = 1;
++	/* Program the ULPI External VBUS bit if needed */
++	usbcfg.b.ulpi_ext_vbus_drv =
++		(core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++	/* Set external TS Dline pulsing */
++	usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
++	dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++
++	/* Reset the Controller */
++	dwc_otg_core_reset(core_if);
++
++	/* Initialize parameters from Hardware configuration registers. */
++	dev_if->num_in_eps = calc_num_in_eps(core_if);
++	dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++	for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++	{
++		dev_if->perio_tx_fifo_size[i] =
++			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++				i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
++	{
++		dev_if->tx_fifo_size[i] =
++			dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++			i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++	core_if->rx_fifo_size =
++			dwc_read_reg32(&global_regs->grxfsiz);
++	core_if->nperio_tx_fifo_size =
++			dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++
++	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++		(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++			/* If FS mode with FS PHY */
++
++			/* core_init() is now called on every switch so only call the
++			 * following for the first time through. */
++			if (!core_if->phy_init_done) {
++				core_if->phy_init_done = 1;
++				DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++				usbcfg.b.physel = 1;
++				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++				/* Reset after a PHY select */
++				dwc_otg_core_reset(core_if);
++			}
++
++			/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.	Also
++			 * do this on HNP Dev/Host mode switches (done in dev_init and
++			 * host_init). */
++			if (dwc_otg_is_host_mode(core_if)) {
++				init_fslspclksel(core_if);
++			}
++			else {
++				init_devspd(core_if);
++			}
++
++			if (core_if->core_params->i2c_enable) {
++				DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++				/* Program GUSBCFG.OtgUtmifsSel to I2C */
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++				usbcfg.b.otgutmifssel = 1;
++				dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++				/* Program GI2CCTL.I2CEn */
++				i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++				i2cctl.b.i2cdevaddr = 1;
++				i2cctl.b.i2cen = 0;
++				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++				i2cctl.b.i2cen = 1;
++				dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++			}
++
++		} /* endif speed == DWC_SPEED_PARAM_FULL */
++
++		else {
++			/* High speed PHY. */
++			if (!core_if->phy_init_done) {
++				core_if->phy_init_done = 1;
++				/* HS PHY parameters.  These parameters are preserved
++				 * during soft reset so only program the first time.  Do
++				 * a soft reset immediately after setting phyif.  */
++				usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
++				if (usbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					usbcfg.b.phyif = 0;
++					usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
++				}
++				else {
++					/* UTMI+ interface */
++					if (core_if->core_params->phy_utmi_width == 16) {
++						usbcfg.b.phyif = 1;
++				}
++				else {
++					usbcfg.b.phyif = 0;
++				}
++			}
++
++			dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Reset after setting the PHY parameters */
++			dwc_otg_core_reset(core_if);
++		}
++	}
++
++	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++		(core_if->hwcfg2.b.fs_phy_type == 1) &&
++		(core_if->core_params->ulpi_fs_ls)) {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 1;
++		usbcfg.b.ulpi_clk_sus_m = 1;
++		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++	else {
++		usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 0;
++		usbcfg.b.ulpi_clk_sus_m = 0;
++		dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++
++	/* Program the GAHBCFG Register.*/
++	switch (core_if->hwcfg2.b.architecture) {
++
++	case DWC_SLAVE_ONLY_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++		ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		core_if->dma_enable = 0;
++		core_if->dma_desc_enable = 0;
++		break;
++
++	case DWC_EXT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++		ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	case DWC_INT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++		ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	}
++	ahbcfg.b.dmaenable = core_if->dma_enable;
++	dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++
++	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++	DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
++	DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
++
++	/*
++	 * Program the GUSBCFG register.
++	 */
++	usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++	switch (core_if->hwcfg2.b.op_mode) {
++	case DWC_MODE_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++		   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_SRP_ONLY_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++		DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++	}
++
++	dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Enable common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Do device or host intialization based on mode during PCD
++	 * and HCD initialization  */
++	if (dwc_otg_is_host_mode(core_if)) {
++		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++		core_if->op_state = A_HOST;
++	}
++	else {
++		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++		core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++		dwc_otg_core_dev_init(core_if);
++#endif
++	}
++}
++
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_core_global_regs_t *global_regs =
++		core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	dwc_write_reg32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Enable interrupts */
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++
++	if(!core_if->multiproc_int_enable) {
++		intr_mask.b.inepintr = 1;
++		intr_mask.b.outepintr = 1;
++	}
++
++	intr_mask.b.erlysuspend = 1;
++
++	if(core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++
++#ifdef DWC_EN_ISOC
++	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable == 0) {
++			if(core_if->pti_enh_enable) {
++				dctl_data_t dctl = { .d32 = 0 };
++				dctl.b.ifrmnum = 1;
++				dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++			} else {
++				intr_mask.b.incomplisoin = 1;
++				intr_mask.b.incomplisoout = 1;
++			}
++		}
++	} else {
++		intr_mask.b.incomplisoin = 1;
++		intr_mask.b.incomplisoout = 1;
++	}
++#endif // DWC_EN_ISOC
++
++/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++	intr_mask.b.isooutdrop = 1;
++	intr_mask.b.eopframe = 1;
++	intr_mask.b.incomplisoin = 1;
++	intr_mask.b.incomplisoout = 1;
++#endif
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++		dwc_read_reg32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
++{
++	int i,size;
++	u_int32_t *default_value_array;
++
++	dwc_otg_core_global_regs_t *global_regs =
++		core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	dcfg_data_t dcfg = { .d32 = 0};
++	grstctl_t resetctl = { .d32 = 0 };
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++
++	/* Restart the Phy Clock */
++	dwc_write_reg32(core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	init_devspd(core_if);
++	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++
++	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++						dwc_read_reg32(&global_regs->grxfsiz));
++
++		rx_fifo_size = params->dev_rx_fifo_size;
++		dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
++
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			dwc_read_reg32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++		core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++		core_if->tx_msk = 0;
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				dwc_read_reg32(&global_regs->gnptxfsiz));
++
++		nptxfifosize.b.depth  = params->dev_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++		dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++		DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				dwc_read_reg32(&global_regs->gnptxfsiz));
++
++		txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		if(core_if->en_multiple_tx_fifo == 0) {
++			//core_if->hwcfg4.b.ded_fifo_en==0
++
++			/**@todo NGS: Fix Periodic FIFO Sizing! */
++			/*
++			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_perio_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz array run from 0 to 14.
++			 */
++			/** @todo Finish debug of this */
++			size=core_if->hwcfg4.b.num_dev_perio_in_ep;
++			default_value_array=params->dev_perio_tx_fifo_size;
++
++		}
++		else {
++			//core_if->hwcfg4.b.ded_fifo_en==1
++			/*
++			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz_dieptxf array run from 0 to 14.
++			 */
++
++			size=core_if->hwcfg4.b.num_in_eps;
++			default_value_array=params->dev_tx_fifo_size;
++
++		}
++		for (i=0; i < size; i++)
++		{
++
++			txfifosize.b.depth = default_value_array[i];
++			DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
++				dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++			dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
++				txfifosize.d32);
++			DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
++				dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++			txfifosize.b.startaddr += txfifosize.b.depth;
++		}
++	}
++	/* Flush the FIFOs */
++	dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Flush the Learning Queue. */
++	resetctl.b.intknqflsh = 1;
++	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	/* Clear all pending Device Interrupts */
++
++	if(core_if->multiproc_int_enable) {
++	}
++
++	/** @todo - if the condition needed to be checked
++	 *  or in any case all pending interrutps should be cleared?
++         */
++	if(core_if->multiproc_int_enable) {
++		for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		        dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
++		}
++
++		for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++		        dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
++		}
++
++		dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
++	} else {
++                dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
++                dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
++                dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++                dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
++	}
++
++	for (i=0; i <= dev_if->num_in_eps; i++)
++	{
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		}
++		else {
++			depctl.d32 = 0;
++		}
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++
++	for (i=0; i <= dev_if->num_out_eps; i++)
++	{
++		depctl_data_t depctl;
++		depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		}
++		else {
++			depctl.d32 = 0;
++		}
++
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++	}
++
++	if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++		dev_if->rx_thr_length = params->rx_thr_length;
++		dev_if->tx_thr_length = params->tx_thr_length;
++
++		dev_if->setup_desc_index = 0;
++
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++
++		dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
++
++		DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++			dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
++
++	}
++
++	dwc_otg_enable_device_interrupts(core_if);
++
++	{
++		diepmsk_data_t msk = { .d32 = 0 };
++		msk.b.txfifoundrn = 1;
++	        if(core_if->multiproc_int_enable) {
++			dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
++	        } else {
++			dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
++	        }
++	}
++
++
++	if(core_if->multiproc_int_enable) {
++		/* Set NAK on Babble */
++		dctl_data_t dctl = { .d32 = 0};
++		dctl.b.nakonbble = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	dwc_write_reg32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts. */
++	dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs =
++	core_if->core_global_regs;
++	gintmsk_data_t intr_mask = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++	intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++
++	dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_host_if_t	*host_if = core_if->host_if;
++	dwc_otg_core_params_t	*params = core_if->core_params;
++	hprt0_data_t		hprt0 = { .d32 = 0 };
++	fifosize_data_t		nptxfifosize;
++	fifosize_data_t		ptxfifosize;
++	int			i;
++	hcchar_data_t		hcchar;
++	hcfg_data_t		hcfg;
++	dwc_otg_hc_regs_t	*hc_regs;
++	int			num_channels;
++	gotgctl_data_t	gotgctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
++
++	/* Restart the Phy Clock */
++	dwc_write_reg32(core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(core_if);
++	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
++	{
++		hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++		dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++		nptxfifosize.b.depth  = params->host_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++		dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++
++		/* Periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++		ptxfifosize.b.depth	 = params->host_perio_tx_fifo_size;
++		ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++	}
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Flush out any leftover queued requests. */
++	num_channels = core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++)
++	{
++		hc_regs = core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 0;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++	}
++
++	/* Halt all channels to put them into a known state. */
++	for (i = 0; i < num_channels; i++)
++	{
++		int count = 0;
++		hc_regs = core_if->host_if->hc_regs[i];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 1;
++		hcchar.b.epdir = 0;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++		do {
++			hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++			if (++count > 1000)
++			{
++				DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++					  __func__, i);
++				break;
++			}
++		}
++		while (hcchar.b.chen);
++	}
++
++	/* Turn on the vbus power. */
++	DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
++	if (core_if->op_state == A_HOST) {
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0) {
++			hprt0.b.prtpwr = 1;
++			dwc_write_reg32(host_if->hprt0, hprt0.d32);
++		}
++	}
++
++	dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = hc->hc_num;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved = 0;
++	dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (core_if->dma_enable) {
++		hc_intr_mask.b.ahberr = 1;
++		if (hc->error_state && !hc->do_split &&
++			hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	}
++	else {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (hc->do_split) {
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				}
++				else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++//	if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
++//			hc->max_packet = 512;
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = hc->dev_addr;
++	hcchar.b.epnum = hc->ep_num;
++	hcchar.b.epdir = hc->ep_is_in;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = hc->ep_type;
++	hcchar.b.mps = hc->max_packet;
++
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Dev Addr: %d\n", hcchar.b.devaddr);
++	DWC_DEBUGPL(DBG_HCDV, "	 Ep Num: %d\n", hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is In: %d\n", hcchar.b.epdir);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is Low Speed: %d\n", hcchar.b.lspddev);
++	DWC_DEBUGPL(DBG_HCDV, "	 Ep Type: %d\n", hcchar.b.eptype);
++	DWC_DEBUGPL(DBG_HCDV, "	 Max Pkt: %d\n", hcchar.b.mps);
++	DWC_DEBUGPL(DBG_HCDV, "	 Multi Cnt: %d\n", hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
++			   hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = hc->complete_split;
++		hcsplt.b.xactpos = hc->xact_pos;
++		hcsplt.b.hubaddr = hc->hub_addr;
++		hcsplt.b.prtaddr = hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "	  comp split %d\n", hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "	  xact pos %d\n", hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "	  hub addr %d\n", hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "	  port addr %d\n", hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "	  is_in %d\n", hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "	  Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "	  xferlen: %d\n", hc->xfer_len);
++	}
++	dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
++			 dwc_hc_t *hc,
++			 dwc_otg_halt_status_e halt_status)
++{
++	gnptxsts_data_t			nptxsts;
++	hptxsts_data_t			hptxsts;
++	hcchar_data_t			hcchar;
++	dwc_otg_hc_regs_t		*hc_regs;
++	dwc_otg_core_global_regs_t	*global_regs;
++	dwc_otg_host_global_regs_t	*host_global_regs;
++
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	global_regs = core_if->core_global_regs;
++	host_global_regs = core_if->host_if->host_global_regs;
++
++	WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++		halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		hc->halt_status = halt_status;
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++
++	if (hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++			  __func__, hc->hc_num);
++
++/*		dwc_otg_dump_global_registers(core_if); */
++/*		dwc_otg_dump_host_registers(core_if); */
++#endif
++		return;
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++			hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		}
++		else {
++			hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->halt_status = halt_status;
++
++	if (hcchar.b.chen) {
++		hc->halt_pending = 1;
++		hc->halt_on_queue = 0;
++	}
++	else {
++		hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	dwc_write_reg32(&hc_regs->hcintmsk, 0);
++	dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++	del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++	{
++		hcchar_data_t hcchar;
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		if (hcchar.b.chdis) {
++			DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++				 __func__, hc->hc_num, hcchar.d32);
++		}
++	}
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
++					 dwc_hc_t *hc,
++					 hcchar_data_t *hcchar)
++{
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t	hfnum;
++		hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
++
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				core_if->hfnum_7_samples++;
++				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				core_if->hfnum_0_samples++;
++				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				core_if->hfnum_other_samples++;
++				core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++				break;
++			}
++		}
++#endif
++	}
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long ptr)
++{
++	hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
++	int hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("	start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping) {
++		if (!core_if->dma_enable) {
++			dwc_otg_hc_do_ping(core_if, hc);
++			hc->xfer_started = 1;
++			return;
++		}
++		else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (hc->do_split) {
++		num_packets = 1;
++
++		if (hc->complete_split && !hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			hc->xfer_len = 0;
++		}
++		else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++			hc->xfer_len = hc->max_packet;
++		}
++		else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++			hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++	else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
++			if (hc->xfer_len > max_periodic_len) {
++				hc->xfer_len = max_periodic_len;
++			}
++			else {
++			}
++		}
++		else if (hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++		}
++
++		if (hc->xfer_len > 0) {
++			num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				hc->xfer_len = num_packets * hc->max_packet;
++			}
++		}
++		else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++#if 0
++//host testusb item 10, would do series of Control transfer
++//with URB_SHORT_NOT_OK set in transfer_flags ,
++//changing the xfer_len would cause the test fail
++		if (hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			hc->xfer_len = num_packets * hc->max_packet;
++		}
++#endif
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			hc->multi_count = num_packets;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/* Set up the initial PID for the transfer. */
++			if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				if (hc->ep_is_in) {
++					if (hc->multi_count == 1) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					}
++					else if (hc->multi_count == 2) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++					}
++					else {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++					}
++				}
++				else {
++					if (hc->multi_count == 1) {
++						hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++					}
++					else {
++						hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++					}
++				}
++			}
++			else {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			}
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++
++	hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = hc->data_pid_start;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "	 Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++
++	if (core_if->dma_enable) {
++		dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
++	}
++
++	/* Start the split */
++	if (hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++	hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++	if (!core_if->dma_enable &&
++		!hc->ep_is_in && hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(core_if, hc);
++	}
++
++#ifdef DEBUG
++	/* Start a timer for this transfer. */
++	core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
++	core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++	core_if->hc_xfer_info[hc->hc_num].hc = hc;
++	core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
++	core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
++	add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	if (hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	}
++	else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	}
++	else if (hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(core_if, hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		hc->requests++;
++		return 1;
++	}
++	else {
++		/* OUT transfers. */
++		if (hc->xfer_count < hc->xfer_len) {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++				hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(core_if, hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(core_if, hc);
++			hc->requests++;
++			return 1;
++		}
++		else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
++	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++	remaining_count = hc->xfer_len - hc->xfer_count;
++	if (remaining_count > hc->max_packet) {
++		byte_count = hc->max_packet;
++	}
++	else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++)
++		{
++			dwc_write_reg32(data_fifo, *data_buff);
++		}
++	}
++	else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++)
++		{
++			dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++		}
++	}
++
++	hc->xfer_count += byte_count;
++	hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microframe number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer.	This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
++{
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
++	dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets.	 It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl = { .d32 = 0 };
++
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	doepctl.b.epena = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++		dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++		dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++	dctl.b.cgnpinnak = 1;
++
++	dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++	DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
++		dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure.	 Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1<<ep->num;
++	}
++	else {
++		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1<<ep->num;
++	}
++
++	/* If the EP is already active don't change the EP Control
++	 * register. */
++	depctl.d32 = dwc_read_reg32(addr);
++	if (!depctl.b.usbactep) {
++		depctl.b.mps = ep->maxpacket;
++		depctl.b.eptype = ep->type;
++		depctl.b.txfnum = ep->tx_fifo_num;
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1; // ???
++		}
++		else {
++			depctl.b.setd0pid = 1;
++		}
++		depctl.b.usbactep = 1;
++
++		dwc_write_reg32(addr, depctl.d32);
++		DWC_DEBUGPL(DBG_PCDV,"DEPCTL(%.8x)=%08x\n",(u32)addr, dwc_read_reg32(addr));
++	}
++
++	/* Enable the Interrupt for this EP */
++	if(core_if->multiproc_int_enable) {
++		if (ep->is_in == 1) {
++			diepmsk_data_t diepmsk = { .d32 = 0};
++			diepmsk.b.xfercompl = 1;
++			diepmsk.b.timeout = 1;
++			diepmsk.b.epdisabled = 1;
++			diepmsk.b.ahberr = 1;
++			diepmsk.b.intknepmis = 1;
++			diepmsk.b.txfifoundrn = 1; //?????
++
++
++			if(core_if->dma_desc_enable) {
++				diepmsk.b.bna = 1;
++			}
++/*
++			if(core_if->dma_enable) {
++				doepmsk.b.nak = 1;
++			}
++*/
++			dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
++
++		} else {
++			doepmsk_data_t doepmsk = { .d32 = 0};
++			doepmsk.b.xfercompl = 1;
++			doepmsk.b.ahberr = 1;
++			doepmsk.b.epdisabled = 1;
++
++
++			if(core_if->dma_desc_enable) {
++				doepmsk.b.bna = 1;
++			}
++/*
++			doepmsk.b.babble = 1;
++			doepmsk.b.nyet = 1;
++			doepmsk.b.nak = 1;
++*/
++			dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
++		}
++		dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
++			 0, daintmsk.d32);
++	} else {
++		dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++				 0, daintmsk.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
++		dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++
++	ep->stall_clear_flag = 0;
++	return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl = { .d32 = 0 };
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = { .d32 = 0};
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1<<ep->num;
++	}
++	else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1<<ep->num;
++	}
++
++	//disabled ep only when ep is enabled
++	//or got halt in the loop in test in cv9
++	depctl.d32=dwc_read_reg32(addr);
++	if(depctl.b.epena){
++		if (ep->is_in == 1) {
++			diepint_data_t diepint;
++			dwc_otg_dev_in_ep_regs_t *in_reg=core_if->dev_if->in_ep_regs[ep->num];
++
++			//Set ep nak
++			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
++			depctl.b.snak=1;
++			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
++
++			//wait for diepint.b.inepnakeff
++			diepint.d32=dwc_read_reg32(&in_reg->diepint);
++			while(!diepint.b.inepnakeff){
++				udelay(1);
++				diepint.d32=dwc_read_reg32(&in_reg->diepint);
++			}
++			diepint.d32=0;
++			diepint.b.inepnakeff=1;
++			dwc_write_reg32(&in_reg->diepint,diepint.d32);
++
++			//set ep disable and snak
++			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
++			depctl.b.snak=1;
++			depctl.b.epdis=1;
++			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
++
++			//wait for diepint.b.epdisabled
++			diepint.d32=dwc_read_reg32(&in_reg->diepint);
++			while(!diepint.b.epdisabled){
++				udelay(1);
++				diepint.d32=dwc_read_reg32(&in_reg->diepint);
++			}
++			diepint.d32=0;
++			diepint.b.epdisabled=1;
++			dwc_write_reg32(&in_reg->diepint,diepint.d32);
++
++			//clear ep enable and disable bit
++			depctl.d32=dwc_read_reg32(&in_reg->diepctl);
++			depctl.b.epena=0;
++			depctl.b.epdis=0;
++			dwc_write_reg32(&in_reg->diepctl,depctl.d32);
++
++		}
++#if 0
++//following DWC OTG DataBook v2.72a, 6.4.2.1.3 Disabling an OUT Endpoint,
++//but this doesn't work, the old code do.
++		else {
++			doepint_data_t doepint;
++			dwc_otg_dev_out_ep_regs_t *out_reg=core_if->dev_if->out_ep_regs[ep->num];
++			dctl_data_t dctl;
++			gintsts_data_t gintsts;
++
++			//set dctl global out nak
++			dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
++			dctl.b.sgoutnak=1;
++			dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl,dctl.d32);
++
++			//wait for gintsts.goutnakeff
++			gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
++			while(!gintsts.b.goutnakeff){
++				udelay(1);
++				gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
++			}
++			gintsts.d32=0;
++			gintsts.b.goutnakeff=1;
++			dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			//set ep disable and snak
++			depctl.d32=dwc_read_reg32(&out_reg->doepctl);
++			depctl.b.snak=1;
++			depctl.b.epdis=1;
++			dwc_write_reg32(&out_reg->doepctl,depctl.d32);
++
++			//wait for diepint.b.epdisabled
++			doepint.d32=dwc_read_reg32(&out_reg->doepint);
++			while(!doepint.b.epdisabled){
++				udelay(1);
++				doepint.d32=dwc_read_reg32(&out_reg->doepint);
++			}
++			doepint.d32=0;
++			doepint.b.epdisabled=1;
++			dwc_write_reg32(&out_reg->doepint,doepint.d32);
++
++			//clear ep enable and disable bit
++			depctl.d32=dwc_read_reg32(&out_reg->doepctl);
++			depctl.b.epena=0;
++			depctl.b.epdis=0;
++			dwc_write_reg32(&out_reg->doepctl,depctl.d32);
++		}
++#endif
++
++		depctl.d32=0;
++		depctl.b.usbactep = 0;
++
++		if (ep->is_in == 0) {
++			if(core_if->dma_enable||core_if->dma_desc_enable)
++				depctl.b.epdis = 1;
++		}
++
++		dwc_write_reg32(addr, depctl.d32);
++	}
++
++	/* Disable the Interrupt for this EP */
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				 daintmsk.d32, 0);
++
++		if (ep->is_in == 1) {
++			dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
++		} else {
++			dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
++		}
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
++					 daintmsk.d32, 0);
++	}
++
++	if (ep->is_in == 1) {
++		DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
++			(u32)&core_if->dev_if->in_ep_regs[ep->num]->diepctl,
++			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepctl),
++			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz),
++			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepint),
++			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepdma),
++			dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++	}
++	else {
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
++			(u32)&core_if->dev_if->out_ep_regs[ep->num]->doepctl,
++			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl),
++			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz),
++			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepint),
++			dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepdma));
++
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++	}
++
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dma_desc_t* dma_desc;
++	uint32_t offset;
++	uint32_t xfer_est;
++	int i;
++
++	ep->desc_cnt = ( ep->total_len / ep->maxxfer)  +
++		((ep->total_len % ep->maxxfer) ? 1 : 0);
++	if(!ep->desc_cnt)
++		ep->desc_cnt = 1;
++
++	dma_desc = ep->desc_addr;
++	xfer_est = ep->total_len;
++	offset = 0;
++	for( i = 0; i < ep->desc_cnt; ++i) {
++		/** DMA Descriptor Setup */
++		if(xfer_est > ep->maxxfer) {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 0;
++			dma_desc->status.b.ioc = 0;
++			dma_desc->status.b.sp = 0;
++			dma_desc->status.b.bytes = ep->maxxfer;
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			xfer_est -= ep->maxxfer;
++			offset += ep->maxxfer;
++		} else {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			if(ep->is_in) {
++				dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
++					1 : ((ep->sent_zlp) ? 1 : 0);
++				dma_desc->status.b.bytes = xfer_est;
++			} else 	{
++				dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
++			}
++
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.bs = BS_HOST_READY;
++		}
++		dma_desc ++;
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t 	depctl;
++	deptsiz_data_t	deptsiz;
++	gintmsk_data_t 	intr_mask = { .d32 = 0};
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		"xfer_buff=%p start_xfer_buff=%p\n",
++		ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++		ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[ep->num];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++			DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++		/* Zero Length Packet? */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++			deptsiz.b.pktcnt =
++				(ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
++				ep->maxpacket;
++		}
++
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n", ep->num, ep->dma_addr);
++
++			if (core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(in_regs->diepdma),
++						 (uint32_t)ep->dma_addr);
++			}
++			else {
++				init_dma_desc_chain(core_if, ep);
++				/** DIEPDMAn Register write */
++
++					VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
++					dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
++			}
++		}
++		else
++		{
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++			if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
++				/**
++				 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++				 * the data will be written into the fifo by the ISR.
++				 */
++				if(core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++						intr_mask.d32, intr_mask.d32);
++				}
++				else {
++					/* Enable the Tx FIFO Empty Interrupt for this EP */
++					if(ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << ep->num;
++						dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++
++					}
++				}
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = ep->num;
++		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
++			(u32)&in_regs->diepctl,
++			dwc_read_reg32(&in_regs->diepctl),
++			dwc_read_reg32(&in_regs->dieptsiz),
++			dwc_read_reg32(&in_regs->diepint),
++			dwc_read_reg32(&in_regs->diepdma),
++			dwc_read_reg32(&in_regs->dtxfsts));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++		/* Program the transfer size and packet count as follows:
++		 *
++		 *	pktcnt = N
++		 *	xfersize = N * maxpacket
++		 */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			/* Zero Length Packet */
++			deptsiz.b.xfersize = ep->maxpacket;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			deptsiz.b.pktcnt =
++					(ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
++					ep->maxpacket;
++			ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++		}
++
++		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			ep->num,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n",
++				ep->num,
++				ep->dma_addr);
++			if (!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(out_regs->doepdma),
++					(uint32_t)ep->dma_addr);
++			}
++			else {
++				init_dma_desc_chain(core_if, ep);
++
++				/** DOEPDMAn Register write */
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
++				dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
++			(u32)&out_regs->doepctl,
++			dwc_read_reg32(&out_regs->doepctl),
++			dwc_read_reg32(&out_regs->doeptsiz),
++			dwc_read_reg32(&out_regs->doepint),
++			dwc_read_reg32(&out_regs->doepdma));
++
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++			dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++	}
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++
++ 	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++		deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 1;
++
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			if (core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(in_regs->diepdma),
++						 (uint32_t)ep->dma_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++			/**
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */
++			if(core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++					0, fifoemptymsk);
++				}
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++		depctl.b.nextep = ep->num;
++		dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++		deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			if (!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(out_regs->doepdma),
++					(uint32_t)ep->dma_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++	"xfer_buff=%p start_xfer_buff=%p, dma_addr=%.8x\n",
++	ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++	ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,ep->dma_addr);
++
++	ep->total_len = ep->xfer_len;
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		core_if->dev_if->in_ep_regs[0];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++			dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++		if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++			deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++			DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
++				dwc_read_reg32(&in_regs->diepctl));
++			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++				deptsiz.d32,
++				deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
++				  gtxstatus.d32);
++#endif
++			return;
++		}
++
++
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++		/* Zero Length Packet? */
++		if (ep->xfer_len == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		}
++		else {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			if (ep->xfer_len > ep->maxpacket) {
++				ep->xfer_len = ep->maxpacket;
++				deptsiz.b.xfersize = ep->maxpacket;
++			}
++			else {
++				deptsiz.b.xfersize = ep->xfer_len;
++			}
++			deptsiz.b.pktcnt = 1;
++
++		}
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			if(core_if->dma_desc_enable == 0) {
++				dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(in_regs->diepdma),
++				(uint32_t)ep->dma_addr);
++			}
++			else {
++				dma_desc = core_if->dev_if->in_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++				dma_desc->status.b.bytes = ep->xfer_len;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DIEPDMA0 Register write */
++
++				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
++					dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if(core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++				}
++			}
++		}
++	}
++	else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *	xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *	pktcnt = N											*/
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
++                                ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
++			}
++			if(!core_if->dma_desc_enable) {
++				dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(out_regs->doepdma),
++				 (uint32_t)ep->dma_addr);
++			}
++			else {
++				dma_desc = core_if->dev_if->out_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.bytes = ep->maxpacket;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
++				dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++			}
++		}
++		else {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t tx_status = { .d32 = 0 };
++
++		tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++		/** @todo Should there be check for room in the Tx
++		 * Status Queue.  If not remove the code above this comment. */
++
++		depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++		deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++
++
++		if(core_if->dma_desc_enable == 0) {
++			deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++					(ep->total_len - ep->xfer_count);
++			deptsiz.b.pktcnt = 1;
++			if(core_if->dma_enable == 0) {
++				ep->xfer_len += deptsiz.b.xfersize;
++			} else {
++				ep->xfer_len = deptsiz.b.xfersize;
++			}
++			dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++		else {
++			ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++				(ep->total_len - ep->xfer_count);
++
++			dma_desc = core_if->dev_if->in_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++			dma_desc->status.b.bytes = ep->xfer_len;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++
++			/** DIEPDMA0 Register write */
++				VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
++				dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++		}
++
++
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if(core_if->dma_desc_enable == 0){
++
++					VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++					dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if(core_if->en_multiple_tx_fifo == 0) {
++				/* First clear it from GINTSTS */
++				intr_mask.b.nptxfempty = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					intr_mask.d32, intr_mask.d32);
++
++			}
++			else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if(ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						0, fifoemptymsk);
++				}
++			}
++		}
++	}
++	else {
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[0];
++
++
++		depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++		deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++
++		if(core_if->dma_desc_enable == 0) {
++			dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++		else {
++			dma_desc = core_if->dev_if->out_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = ep->maxpacket;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
++			dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++		}
++
++
++		DWC_DEBUGPL(DBG_PCDV, "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			ep->xfer_len,
++			deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if(core_if->dma_desc_enable == 0){
++
++				VERIFY_PCD_DMA_ADDR(ep->dma_addr);
++				dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
++			}
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++	unsigned int	start, num, i;
++	char		line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i)
++		{
++			if (i == 8)
++				*p++ = ' ';
++			sprintf(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINT("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP.	For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned.	The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last
++	 *	packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++	uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
++	if (ep->xfer_count >= ep->xfer_len) {
++			DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++			return;
++	}
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++		byte_count = ep->xfer_len - ep->xfer_count;
++	}
++	else {
++		byte_count = ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count =  (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++	dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++	/**@todo NGS Where are the Periodic Tx FIFO addresses
++	 * intialized?	What should this be? */
++
++	fifo = core_if->data_fifo[ep->num];
++
++
++	DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
++
++	if (!dma) {
++		for (i=0; i<dword_count; i++, data_buff++) {
++			dwc_write_reg32(fifo, *data_buff);
++		}
++	}
++
++	ep->xfer_count += byte_count;
++	ep->xfer_buff += byte_count;
++	ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s ep%d-%s1\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
++		(ep->is_in?"in":"out"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the disable and stall bits */
++#if 0
++//epdis is set here but not cleared at latter dwc_otg_ep_clear_stall,
++//which cause the testusb item 13 failed(Host:pc, device: otg device)
++		if (depctl.b.epena) {
++			depctl.b.epdis = 1;
++		}
++#endif
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++	else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++		depctl.d32 = dwc_read_reg32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		dwc_write_reg32(depctl_addr, depctl.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV,"%s: DEPCTL(%.8x)=%0x\n",__func__,(u32)depctl_addr,dwc_read_reg32(depctl_addr));
++
++	return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		(ep->is_in?"IN":"OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++	}
++	else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++	}
++
++	depctl.d32 = dwc_read_reg32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++		ep->type == DWC_OTG_EP_TYPE_BULK) {
++		depctl.b.setd0pid = 1; /* DATA0 */
++	}
++
++	dwc_write_reg32(depctl_addr, depctl.d32);
++	DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++	return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer.	To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest	  Destination buffer for the packet.
++ * @param bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++			 uint8_t *dest,
++			 uint16_t bytes)
++{
++	int i;
++	int word_count = (bytes + 3) / 4;
++
++	volatile uint32_t *fifo = core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *)dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++					core_if, dest, bytes);
++
++	for (i=0; i<word_count; i++, data_buff++)
++	{
++		*data_buff = dwc_read_reg32(fifo);
++	}
++
++	return;
++}
++
++
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Device Global Registers\n");
++	addr=&core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINT("DCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINT("DCTL          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINT("DSTS          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINT("DIEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINT("DOEPMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINT("DAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->daintmsk;
++	DWC_PRINT("DAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINT("DTKNQR1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr2;
++		DWC_PRINT("DTKNQR2       @0x%08X : 0x%08X\n",
++		  (uint32_t)addr,dwc_read_reg32(addr));
++	}
++
++	addr=&core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINT("DVBUSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINT("DVBUSPULSE    @0x%08X : 0x%08X\n",
++				  (uint32_t)addr,dwc_read_reg32(addr));
++
++	if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++		DWC_PRINT("DTKNQR3_DTHRCTL       @0x%08X : 0x%08X\n",
++		  (uint32_t)addr, dwc_read_reg32(addr));
++	}
++/*
++	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINT("DTKNQR4	 @0x%08X : 0x%08X\n",
++				  (uint32_t)addr, dwc_read_reg32(addr));
++	}
++*/
++	addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++	DWC_PRINT("FIFOEMPMSK    @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
++
++	addr=&core_if->dev_if->dev_global_regs->deachint;
++	DWC_PRINT("DEACHINT      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->dev_if->dev_global_regs->deachintmsk;
++	DWC_PRINT("DEACHINTMSK   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++		addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
++		DWC_PRINT("DIEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++	}
++
++
++	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++		addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
++		DWC_PRINT("DOEPEACHINTMSK[%d]    @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++	}
++
++	for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINT("Device IN EP %d Registers\n", i);
++		addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINT("DIEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINT("DIEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINT("DIETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINT("DIEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINT("DTXFSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		//reading depdmab in non desc dma mode would halt the ahb bus...
++		if(core_if->dma_desc_enable){
++			addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
++			DWC_PRINT("DIEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		}
++	}
++
++
++	for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINT("Device OUT EP %d Registers\n", i);
++		addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINT("DOEPCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
++		DWC_PRINT("DOEPFN        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINT("DOEPINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINT("DOETSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINT("DOEPDMA       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++		//reading depdmab in non desc dma mode would halt the ahb bus...
++		if(core_if->dma_desc_enable){
++			addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
++			DWC_PRINT("DOEPDMAB      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		}
++
++	}
++
++
++
++	return;
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
++{
++	volatile uint8_t *addr, *start_addr, *end_addr;
++
++	DWC_PRINT("SPRAM Data:\n");
++	start_addr = (void*)core_if->core_global_regs;
++	DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
++	start_addr += 0x00028000;
++	end_addr=(void*)core_if->core_global_regs;
++	end_addr += 0x000280e0;
++
++	for(addr = start_addr; addr < end_addr; addr+=16)
++	{
++		DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
++			addr[0],
++			addr[1],
++			addr[2],
++			addr[3],
++			addr[4],
++			addr[5],
++			addr[6],
++			addr[7],
++			addr[8],
++			addr[9],
++			addr[10],
++			addr[11],
++			addr[12],
++			addr[13],
++			addr[14],
++			addr[15]
++			);
++	}
++
++	return;
++}
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Host Global Registers\n");
++	addr=&core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINT("HCFG          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hfir;
++	DWC_PRINT("HFIR          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINT("HFNUM         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINT("HPTXSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->haint;
++	DWC_PRINT("HAINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINT("HAINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=core_if->host_if->hprt0;
++	DWC_PRINT("HPRT0         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	for (i=0; i<core_if->core_params->host_channels; i++)
++	{
++		DWC_PRINT("Host Channel %d Specific Registers\n", i);
++		addr=&core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINT("HCCHAR        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINT("HCSPLT        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINT("HCINT         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINT("HCINTMSK      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINT("HCTSIZ        @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++		addr=&core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINT("HCDMA         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
++{
++	int i,size;
++	char* str;
++	volatile uint32_t *addr;
++
++	DWC_PRINT("Core Global Registers\n");
++	addr=&core_if->core_global_regs->gotgctl;
++	DWC_PRINT("GOTGCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gotgint;
++	DWC_PRINT("GOTGINT       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gahbcfg;
++	DWC_PRINT("GAHBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gusbcfg;
++	DWC_PRINT("GUSBCFG       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grstctl;
++	DWC_PRINT("GRSTCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gintsts;
++	DWC_PRINT("GINTSTS       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gintmsk;
++	DWC_PRINT("GINTMSK       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grxstsr;
++	DWC_PRINT("GRXSTSR       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	//addr=&core_if->core_global_regs->grxstsp;
++	//DWC_PRINT("GRXSTSP   @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->grxfsiz;
++	DWC_PRINT("GRXFSIZ       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINT("GNPTXFSIZ     @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gnptxsts;
++	DWC_PRINT("GNPTXSTS      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gi2cctl;
++	DWC_PRINT("GI2CCTL       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gpvndctl;
++	DWC_PRINT("GPVNDCTL      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ggpio;
++	DWC_PRINT("GGPIO         @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->guid;
++	DWC_PRINT("GUID          @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->gsnpsid;
++	DWC_PRINT("GSNPSID       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg1;
++	DWC_PRINT("GHWCFG1       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg2;
++	DWC_PRINT("GHWCFG2       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg3;
++	DWC_PRINT("GHWCFG3       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->ghwcfg4;
++	DWC_PRINT("GHWCFG4       @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++	addr=&core_if->core_global_regs->hptxfsiz;
++	DWC_PRINT("HPTXFSIZ      @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++	size=(core_if->hwcfg4.b.ded_fifo_en)?
++		core_if->hwcfg4.b.num_in_eps:core_if->hwcfg4.b.num_dev_perio_in_ep;
++	str=(core_if->hwcfg4.b.ded_fifo_en)?"DIEPTXF":"DPTXFSIZ";
++	for (i=0; i<size; i++)
++	{
++		addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
++		DWC_PRINT("%s[%d]        @0x%08X : 0x%08X\n",str,i,(uint32_t)addr,dwc_read_reg32(addr));
++	}
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
++					   const int num)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = num;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++					  __func__, greset.d32,
++			dwc_read_reg32(&global_regs->gnptxsts));
++			break;
++		}
++	}
++	while (greset.b.txfflsh == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++	/*
++	 *
++	 */
++	greset.b.rxfflsh = 1;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			break;
++		}
++	}
++	while (greset.b.rxfflsh == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = { .d32 = 0};
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		UDELAY(10);
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 100000) {
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			return;
++		}
++	}
++	while (greset.b.ahbidle == 0);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	dwc_write_reg32(&global_regs->grstctl, greset.d32);
++	do {
++		greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
++				greset.d32);
++			break;
++		}
++	}
++	while (greset.b.csftrst == 1);
++
++	/* Wait for 3 PHY Clocks*/
++	MDELAY(100);
++
++	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
++	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
++	DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
++
++}
++
++
++
++/**
++ * Register HCD callbacks.	The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
++						dwc_otg_cil_callbacks_t *cb,
++						void *p)
++{
++	core_if->hcd_cb = cb;
++	cb->p = p;
++}
++
++/**
++ * Register PCD callbacks.	The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
++						dwc_otg_cil_callbacks_t *cb,
++						void *p)
++{
++	core_if->pcd_cb = cb;
++	cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0};
++	uint32_t len = 0;
++	uint32_t dwords;
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++
++	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++	len = ep->xfer_len - ep->xfer_count;
++
++	if (len > ep->maxpacket) {
++		len = ep->maxpacket;
++	}
++
++	dwords = (len + 3)/4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
++
++	while  (txstatus.b.txfspcavail > dwords &&
++		ep->xfer_count < ep->xfer_len &&
++		ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, ep, 0);
++
++		len = ep->xfer_len - ep->xfer_count;
++		if (len > ep->maxpacket) {
++			len = ep->maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++	}
++}
++
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	deptsiz_data_t		deptsiz = { .d32 = 0 };
++	depctl_data_t 		depctl = { .d32 = 0 };
++	dsts_data_t		dsts = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++
++	if(ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++	ep->xfer_buff = ep->cur_pkt_addr;
++	ep->dma_addr = ep->cur_pkt_dma_addr;
++
++	if(ep->is_in) {
++		/* Program the transfer size and packet count
++		 *	as follows: xfersize = N * maxpacket +
++		 *	short_packet pktcnt = N + (short_packet
++		 *	exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->xfer_len;
++		deptsiz.b.pktcnt =
++			(ep->xfer_len - 1 + ep->maxpacket) /
++			ep->maxpacket;
++		deptsiz.b.mc = deptsiz.b.pktcnt;
++		dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++		}
++	} else {
++		deptsiz.b.pktcnt =
++				(ep->xfer_len + (ep->maxpacket - 1)) /
++				ep->maxpacket;
++		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++		dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++		if (core_if->dma_enable) {
++				dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
++					(uint32_t)ep->dma_addr);
++		}
++	}
++
++
++	/** Enable endpoint, clear nak  */
++
++	depctl.d32 = 0;
++	if(ep->bInterval == 1) {
++		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++		ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++		if(ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	} else {
++		ep->next_frame += ep->bInterval;
++
++		if(ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++
++	dwc_modify_reg32(addr, 0, depctl.d32);
++	depctl.d32 = dwc_read_reg32(addr);
++
++	if(ep->is_in && core_if->dma_enable == 0) {
++		write_isoc_frame_data(core_if, ep);
++	}
++
++}
++
++#endif //DWC_EN_ISOC
+--- /dev/null
++++ b/drivers/usb/dwc/otg_cil.h
+@@ -0,0 +1,1106 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: #91 $
++ * $Date: 2008/09/19 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include <linux/workqueue.h>
++#include <linux/version.h>
++#include <asm/param.h>
++//#include <asm/arch/regs-irq.h>
++
++#include "otg_plat.h"
++#include "otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++
++/** Macros defined for DWC OTG HW Release verison */
++#define OTG_CORE_REV_2_00	0x4F542000
++#define OTG_CORE_REV_2_60a	0x4F54260A
++#define OTG_CORE_REV_2_71a	0x4F54271A
++#define OTG_CORE_REV_2_72a	0x4F54272A
++
++/**
++*/
++typedef struct iso_pkt_info
++{
++	uint32_t	offset;
++	uint32_t 	length;
++	int32_t 	status;
++} iso_pkt_info_t;
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep
++{
++	/** EP number used for register address lookup */
++	uint8_t	 num;
++	/** EP direction 0 = OUT */
++	unsigned is_in : 1;
++	/** EP active. */
++	unsigned active : 1;
++
++	/** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++		If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++	unsigned tx_fifo_num : 4;
++	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
++	unsigned type : 2;
++#define DWC_OTG_EP_TYPE_CONTROL	   0
++#define DWC_OTG_EP_TYPE_ISOC	   1
++#define DWC_OTG_EP_TYPE_BULK	   2
++#define DWC_OTG_EP_TYPE_INTR	   3
++
++	/** DATA start PID for INTR and BULK EP */
++	unsigned data_pid_start : 1;
++	/** Frame (even/odd) for ISOC EP */
++	unsigned even_odd_frame : 1;
++	/** Max Packet bytes */
++	unsigned maxpacket : 11;
++
++	/** Max Transfer size */
++	unsigned maxxfer : 16;
++
++	/** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++
++	uint32_t dma_addr;
++
++	uint32_t dma_desc_addr;
++	dwc_otg_dma_desc_t* desc_addr;
++
++
++	uint8_t *start_xfer_buff;
++	/** pointer to the transfer buffer */
++	uint8_t *xfer_buff;
++	/** Number of bytes to transfer */
++	unsigned xfer_len : 19;
++	/** Number of bytes transferred. */
++	unsigned xfer_count : 19;
++	/** Sent ZLP */
++	unsigned sent_zlp : 1;
++	/** Total len for control transfer */
++	unsigned total_len : 19;
++
++	/** stall clear flag */
++	unsigned stall_clear_flag : 1;
++
++	/** Allocated DMA Desc count */
++	uint32_t 	desc_cnt;
++
++	uint32_t aligned_dma_addr;
++	uint32_t aligned_buf_size;
++	uint8_t *aligned_buf;
++
++
++#ifdef DWC_EN_ISOC
++	/**
++	 * Variables specific for ISOC EPs
++	 *
++	 */
++	/** DMA addresses of ISOC buffers */
++	uint32_t 	dma_addr0;
++	uint32_t	dma_addr1;
++
++	uint32_t 	iso_dma_desc_addr;
++	dwc_otg_dma_desc_t* iso_desc_addr;
++
++	/** pointer to the transfer buffers */
++	uint8_t		*xfer_buff0;
++	uint8_t		*xfer_buff1;
++
++	/** number of ISOC Buffer is processing */
++	uint32_t 	proc_buf_num;
++	/** Interval of ISOC Buffer processing */
++	uint32_t 	buf_proc_intrvl;
++	/** Data size for regular frame */
++	uint32_t 	data_per_frame;
++
++	/* todo - pattern data support is to be implemented in the future */
++	/** Data size for pattern frame */
++	uint32_t 	data_pattern_frame;
++	/** Frame number of pattern data */
++	uint32_t 	sync_frame;
++
++	/** bInterval */
++	uint32_t 	bInterval;
++	/** ISO Packet number per frame */
++	uint32_t 	pkt_per_frm;
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t 	next_frame;
++	/** Number of packets per buffer processing */
++	uint32_t	pkt_cnt;
++	/** Info for all isoc packets */
++	iso_pkt_info_t	*pkt_info;
++	/** current pkt number */
++	uint32_t	cur_pkt;
++	/** current pkt number */
++	uint8_t 	*cur_pkt_addr;
++	/** current pkt number */
++	uint32_t	cur_pkt_dma_addr;
++#endif //DWC_EN_ISOC
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status
++{
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc
++{
++	/** Host channel number used for register address lookup */
++	uint8_t	 hc_num;
++
++	/** Device to access */
++	unsigned dev_addr : 7;
++
++	/** EP to access */
++	unsigned ep_num : 4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in : 1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type : 2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet : 11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *	  SETUP (Control EP)
++	 */
++	unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count: 2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e	halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;		   /**< Enable split for the channel */
++	uint8_t complete_split;	   /**< Enable complete split */
++	uint8_t hub_addr;		   /**< Address of high speed hub */
++
++	uint8_t port_addr;		   /**< Port of the low/full speed device */
++	/** Split transaction position
++	 * One of the following values:
++	 *	  - DWC_HCSPLIT_XACTPOS_MID
++	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *	  - DWC_HCSPLIT_XACTPOS_END
++	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	struct list_head	hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++typedef struct dwc_otg_core_params
++{
++	int32_t opt;
++#define dwc_param_opt_default 1
++
++	/**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++	 * 0 - HNP and SRP capable (default)
++	 * 1 - SRP Only capable
++	 * 2 - No HNP/SRP capable
++	 */
++	int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
++
++	/**
++	 * Specifies whether to use slave or DMA mode for accessing the data
++	 * FIFOs. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - Slave
++	 * 1 - DMA (default, if available)
++	 */
++	int32_t dma_enable;
++#define dwc_param_dma_enable_default 1
++
++	/**
++	 * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
++	 * FIFOs in device mode. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - address DMA
++	 * 1 - DMA Descriptor(default, if available)
++	 */
++	int32_t dma_desc_enable;
++#define dwc_param_dma_desc_enable_default 0
++	/** The DMA Burst size (applicable only for External DMA
++	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++	 */
++	int32_t dma_burst_size;	 /* Translate this to GAHBCFG values */
++//#define dwc_param_dma_burst_size_default 32
++#define dwc_param_dma_burst_size_default 1
++
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++	int32_t speed;
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++	/** Specifies whether low power mode is supported when attached
++	 *	to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled.	 If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++#define dwc_param_enable_dynamic_fifo_default 1
++
++	/** Total number of 4-byte words in the data FIFO memory. This
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++#define dwc_param_data_fifo_size_default 8192
++
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++//#define dwc_param_dev_rx_fifo_size_default  1064
++#define dwc_param_dev_rx_fifo_size_default  0x100
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	 int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++//#define dwc_param_dev_tx_fifo_size_default 256
++#define dwc_param_dev_tx_fifo_size_default 0x80
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++#define dwc_param_dev_nperio_tx_fifo_size_default 0x80
++
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++//#define dwc_param_dev_perio_tx_fifo_size_default 256
++#define dwc_param_dev_perio_tx_fifo_size_default 0x80
++
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_rx_fifo_size;
++//#define dwc_param_host_rx_fifo_size_default 1024
++#define dwc_param_host_rx_fifo_size_default 0x292
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++	 * when Dynamic FIFO sizing is enabled in the core.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++//#define dwc_param_host_nperio_tx_fifo_size_default 0x292
++#define dwc_param_host_nperio_tx_fifo_size_default 0x80
++
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++#define dwc_param_host_perio_tx_fifo_size_default 0x292
++
++	/** The maximum transfer size supported in bytes.
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++#define dwc_param_max_transfer_size_default 65535
++
++	/** The maximum number of packets in a transfer.
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++#define dwc_param_max_packet_count_default 511
++
++	/** The number of host channel registers to use.
++	 * 1 to 16 (default 12)
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++//#define dwc_param_host_channels_default 12
++#define dwc_param_host_channels_default 16
++
++	/** The number of endpoints in addition to EP0 available for device
++	 * mode operations.
++	 * 1 to 15 (default 6 IN and OUT)
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++//#define dwc_param_dev_endpoints_default 6
++#define dwc_param_dev_endpoints_default 8
++
++		/**
++		 * Specifies the type of PHY interface to use. By default, the driver
++		 * will automatically detect the phy_type.
++		 *
++		 * 0 - Full Speed PHY
++		 * 1 - UTMI+ (default)
++		 * 2 - ULPI
++		 */
++	int32_t phy_type;
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++	/**
++	 * Specifies the UTMI+ Data Width.	This parameter is
++	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++	 * PHY_TYPE, this parameter indicates the data width between
++	 * the MAC and the ULPI Wrapper.) Also, this parameter is
++	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++	 * to "8 and 16 bits", meaning that the core has been
++	 * configured to work at either data path width.
++	 *
++	 * 8 or 16 bits (default 16)
++	 */
++	int32_t phy_utmi_width;
++#define dwc_param_phy_utmi_width_default 16
++
++	/**
++	 * Specifies whether the ULPI operates at double or single
++	 * data rate. This parameter is only applicable if PHY_TYPE is
++	 * ULPI.
++	 *
++	 * 0 - single data rate ULPI interface with 8 bit wide data
++	 * bus (default)
++	 * 1 - double data rate ULPI interface with 4 bit wide data
++	 * bus
++	 */
++	int32_t phy_ulpi_ddr;
++#define dwc_param_phy_ulpi_ddr_default 0
++
++	/**
++	 * Specifies whether to use the internal or external supply to
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++	/**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++	 * 0 - No (default)
++	 * 1 - Yes
++	 */
++	int32_t i2c_enable;
++#define dwc_param_i2c_enable_default 0
++
++	int32_t ulpi_fs_ls;
++#define dwc_param_ulpi_fs_ls_default 0
++
++	int32_t ts_dline;
++#define dwc_param_ts_dline_default 0
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++
++	/** Per Transfer Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	uint32_t pti_enable;
++#define dwc_param_pti_enable_default 0
++
++	/** Molti Processor Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	uint32_t mpi_enable;
++#define dwc_param_mpi_enable_default 0
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info
++{
++	struct dwc_otg_core_if	*core_if;
++	dwc_hc_t		*hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if
++{
++	/** Parameters that define how the core should be configured.*/
++	dwc_otg_core_params_t	   *core_params;
++
++	/** Core Global registers starting at offset 000h. */
++	dwc_otg_core_global_regs_t *core_global_regs;
++
++	/** Device-specific information */
++	dwc_otg_dev_if_t		   *dev_if;
++	/** Host-specific information */
++	dwc_otg_host_if_t		   *host_if;
++
++	/** Value from SNPSID register */
++	uint32_t snpsid;
++
++	/*
++	 * Set to 1 if the core PHY interface bits in USBCFG have been
++	 * initialized.
++	 */
++	uint8_t phy_init_done;
++
++	/*
++	 * SRP Success flag, set by srp success interrupt in FS I2C mode
++	 */
++	uint8_t srp_success;
++	uint8_t srp_timer_started;
++
++	/* Common configuration information */
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++	/** Total RAM for FIFOs (Bytes) */
++	uint16_t total_fifo_size;
++	/** Size of Rx FIFO (Bytes) */
++	uint16_t rx_fifo_size;
++	/** Size of Non-periodic Tx FIFO (Bytes) */
++	uint16_t nperio_tx_fifo_size;
++
++
++	/** 1 if DMA is enabled, 0 otherwise. */
++	uint8_t dma_enable;
++
++	/** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
++	uint8_t dma_desc_enable;
++
++	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t pti_enh_enable;
++
++	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t multiproc_int_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
++	 * process of being queued */
++	uint8_t queuing_high_bandwidth;
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;
++	hwcfg2_data_t hwcfg2;
++	hwcfg3_data_t hwcfg3;
++	hwcfg4_data_t hwcfg4;
++
++	/** Host and Device Configuration -- stored here for convenience.*/
++	hcfg_data_t hcfg;
++	dcfg_data_t dcfg;
++
++	/** The operational State, during transations
++	 * (a_host>>a_peripherial and b_device=>b_host) this may not
++	 * match the core but allows the software to determine
++	 * transitions.
++	 */
++	uint8_t op_state;
++
++	/**
++	 * Set to 1 if the HCD needs to be restarted on a session request
++	 * interrupt. This is required if no connector ID status change has
++	 * occurred since the HCD was last disconnected.
++	 */
++	uint8_t restart_hcd_on_session_req;
++
++	/** HCD callbacks */
++	/** A-Device is a_host */
++#define A_HOST		(1)
++	/** A-Device is a_suspend */
++#define A_SUSPEND	(2)
++	/** A-Device is a_peripherial */
++#define A_PERIPHERAL	(3)
++	/** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++	/** B-Device is operating as a Host. */
++#define B_HOST		(5)
++
++	/** HCD callbacks */
++	struct dwc_otg_cil_callbacks *hcd_cb;
++	/** PCD callbacks */
++	struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++	/** Workqueue object used for handling several interrupts */
++	struct workqueue_struct *wq_otg;
++
++	/** Work object used for handling "Connector ID Status Change" Interrupt */
++	struct work_struct 	w_conn_id;
++
++	/** Work object used for handling "Wakeup Detected" Interrupt */
++	struct delayed_work	w_wkp;
++
++#ifdef DEBUG
++	uint32_t		start_hcchar_val[MAX_EPS_CHANNELS];
++
++	hc_xfer_info_t		hc_xfer_info[MAX_EPS_CHANNELS];
++	struct timer_list	hc_xfer_timer[MAX_EPS_CHANNELS];
++
++	uint32_t		hfnum_7_samples;
++	uint64_t		hfnum_7_frrem_accum;
++	uint32_t		hfnum_0_samples;
++	uint64_t		hfnum_0_frrem_accum;
++	uint32_t		hfnum_other_samples;
++	uint64_t		hfnum_other_frrem_accum;
++#endif
++
++
++} dwc_otg_core_if_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register
++ * because after clearing in this register trigerred IRQ from
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++
++#ifdef CONFIG_MACH_IPMATE
++#define  S3C2410X_CLEAR_EINTPEND()   \
++do { \
++	if (!dwc_otg_read_core_intr(core_if)) { \
++	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++	} \
++} while (0)
++#else
++#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
++#endif
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++extern void w_conn_id_status_change(struct work_struct *p);
++extern void w_wakeup_detected(struct work_struct *p);
++
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++					   dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++#endif //DWC_EN_ISOC
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++				dwc_hc_t *_hc,
++				dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify.	It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++	hprt0.b.prtena = 0;
++	hprt0.b.prtconndet = 0;
++	hprt0.b.prtenchng = 0;
++	hprt0.b.prtovrcurrchng = 0;
++	return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++				uint8_t *dest,
++				uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
++								   const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
++extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++		dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
++{
++	uint32_t v;
++
++	if(core_if->multiproc_int_enable) {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++	return (v & 0xffff);
++
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
++{
++	uint32_t v;
++
++	if(core_if->multiproc_int_enable) {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++				dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++
++	return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
++							dwc_ep_t *ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t v, msk, emp;
++
++	if(core_if->multiproc_int_enable) {
++		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
++		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	} else {
++		msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++		emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	}
++
++
++	return v;
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
++							dwc_ep_t *_ep)
++{
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v;
++	doepmsk_data_t msk = { .d32 = 0 };
++
++	if(_core_if->multiproc_int_enable) {
++		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
++		if(_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++	} else {
++		msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++		if(_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++	}
++	return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++	return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
++{
++	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure.	This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks
++{
++	/** Start function for role change */
++	int (*start) (void *_p);
++	/** Stop Function for role change */
++	int (*stop) (void *_p);
++	/** Disconnect Function for role change */
++	int (*disconnect) (void *_p);
++	/** Resume/Remote wakeup Function */
++	int (*resume_wakeup) (void *_p);
++	/** Suspend function */
++	int (*suspend) (void *_p);
++	/** Session Start (SRP) */
++	int (*session_start) (void *_p);
++	/** Pointer passed to start() and stop() */
++	void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++						dwc_otg_cil_callbacks_t *_cb,
++						void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++						dwc_otg_cil_callbacks_t *_cb,
++						void *_p);
++#ifndef warn
++#define warn printk
++#endif
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/dwc/otg_cil_intr.c
+@@ -0,0 +1,852 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: #10 $
++ * $Date: 2008/07/16 $
++ * $Change: 1065567 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "otg_plat.h"
++#include "otg_regs.h"
++#include "otg_cil.h"
++#include "otg_pcd.h"
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t *core_if)
++{
++        return (core_if->op_state==A_HOST?"a_host":
++                (core_if->op_state==A_SUSPEND?"a_suspend":
++                 (core_if->op_state==A_PERIPHERAL?"a_peripheral":
++                  (core_if->op_state==B_PERIPHERAL?"b_peripheral":
++                   (core_if->op_state==B_HOST?"b_host":
++                    "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++		 dwc_otg_mode(core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->start) {
++                core_if->hcd_cb->start(core_if->hcd_cb->p);
++        }
++}
++/** Stop the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++                core_if->hcd_cb->stop(core_if->hcd_cb->p);
++        }
++}
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++                core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++        }
++}
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++                core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++        }
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->start) {
++                core_if->pcd_cb->start(core_if->pcd_cb->p);
++        }
++}
++/** Stop the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++                core_if->pcd_cb->stop(core_if->pcd_cb->p);
++        }
++}
++/** Suspend the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++                core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++        }
++}
++/** Resume the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume(dwc_otg_core_if_t *core_if)
++{
++        if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++                core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++        }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
++{
++        dwc_otg_core_global_regs_t *global_regs =
++                core_if->core_global_regs;
++	gotgint_data_t gotgint;
++        gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++	gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
++        gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++                    op_state_str(core_if));
++        //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++                            op_state_str(core_if));
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++
++                if (core_if->op_state == B_HOST) {
++
++			dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_start(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++                        core_if->op_state = B_PERIPHERAL;
++                } else {
++			dwc_otg_pcd_t *pcd;
++
++                        /* If not B_HOST and Device HNP still set. HNP
++                         * Did not succeed!*/
++                        if (gotgctl.b.devhnpen) {
++                                DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++                                DWC_ERROR("Device Not Connected/Responding!\n");
++                        }
++
++                        /* If Session End Detected the B-Cable has
++                         * been disconnected. */
++                        /* Reset PCD and Gadget driver to a
++                         * clean state. */
++
++			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_stop(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++                }
++                gotgctl.d32 = 0;
++                gotgctl.b.devhnpen = 1;
++                dwc_modify_reg32(&global_regs->gotgctl,
++                                  gotgctl.d32, 0);
++        }
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.sesreqscs) {
++			if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++			    (core_if->core_params->i2c_enable)) {
++				core_if->srp_success = 1;
++			}
++			else {
++				dwc_otg_pcd_t *pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++				if(unlikely(!pcd)) {
++					DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++					BUG();
++				}
++				SPIN_LOCK(&pcd->lock);
++
++				pcd_resume(core_if);
++
++				SPIN_UNLOCK(&pcd->lock);
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				dwc_modify_reg32(&global_regs->gotgctl,
++						  gotgctl.d32, 0);
++			}
++                }
++	}
++	if (gotgint.b.hstnegsucstschng) {
++                /* Print statements during the HNP interrupt handling
++                 * can cause it to fail.*/
++                gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++                if (gotgctl.b.hstnegscs) {
++                        if (dwc_otg_is_host_mode(core_if)) {
++				dwc_otg_pcd_t *pcd;
++
++                                core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				dwc_modify_reg32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++
++				pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++				if(unlikely(!pcd)) {
++					DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++					BUG();
++				}
++				SPIN_LOCK(&pcd->lock);
++
++                                pcd_stop(core_if);
++
++				SPIN_UNLOCK(&pcd->lock);
++                                /*
++                                 * Initialize the Core for Host mode.
++                                 */
++                                hcd_start(core_if);
++                                core_if->op_state = B_HOST;
++                        }
++                } else {
++                        gotgctl.d32 = 0;
++                        gotgctl.b.hnpreq = 1;
++                        gotgctl.b.devhnpen = 1;
++                        dwc_modify_reg32(&global_regs->gotgctl,
++                                          gotgctl.d32, 0);
++                        DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++                        DWC_ERROR("Device Not Connected/Responding\n");
++                }
++	}
++	if (gotgint.b.hstnegdet) {
++                /* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++                 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n",
++                            (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++                if (dwc_otg_is_device_mode(core_if)){
++			dwc_otg_pcd_t *pcd;
++
++                	DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
++                        hcd_disconnect(core_if);
++
++			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_start(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++                        core_if->op_state = A_PERIPHERAL;
++                } else {
++			dwc_otg_pcd_t *pcd;
++
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			dwc_modify_reg32(&global_regs->gintmsk,
++					 gintmsk.d32, 0);
++
++			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_stop(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++                        hcd_start(core_if);
++                        core_if->op_state = A_HOST;
++                }
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++
++void w_conn_id_status_change(struct work_struct *p)
++{
++	dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
++
++	uint32_t count = 0;
++        gotgctl_data_t gotgctl = { .d32 = 0 };
++
++        gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++        /* B-Device connector (Device Mode) */
++        if (gotgctl.b.conidsts) {
++		dwc_otg_pcd_t *pcd;
++
++                /* Wait for switch to device mode. */
++                while (!dwc_otg_is_device_mode(core_if)){
++                        DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++
++		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++		if(unlikely(!pcd)) {
++			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++			BUG();
++		}
++		SPIN_LOCK(&pcd->lock);
++
++                pcd_start(core_if);
++
++		SPIN_UNLOCK(&pcd->lock);
++        } else {
++                /* A-Device connector (Host Mode) */
++                while (!dwc_otg_is_host_mode(core_if)) {
++                        DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++                                  (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++                        MDELAY(100);
++                        if (++count > 10000) *(uint32_t*)NULL=0;
++                }
++                core_if->op_state = A_HOST;
++                /*
++                 * Initialize the Core for Host mode.
++                 */
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++                hcd_start(core_if);
++        }
++}
++
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
++{
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk_data_t gintmsk = { .d32 = 0 };
++	gintsts_data_t gintsts = { .d32 = 0 };
++
++	gintmsk.b.sofintr = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++  (%s)\n",
++                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++
++	/*
++	 * Need to schedule a work, as there are possible DELAY function calls
++ 	*/
++	queue_work(core_if->wq_otg, &core_if->w_conn_id);
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
++{
++        hprt0_data_t hprt0;
++	gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++                DWC_PRINT("SRP: Device mode\n");
++        } else {
++		DWC_PRINT("SRP: Host mode\n");
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		hcd_session_start(core_if);
++        }
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sessreqintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++
++void w_wakeup_detected(struct work_struct *p)
++{
++	struct delayed_work *dw = container_of(p, struct delayed_work, work);
++	dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
++
++        /*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++        hprt0_data_t hprt0 = {.d32=0};
++        hprt0.d32 = dwc_otg_read_hprt0(core_if);
++        DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++//      MDELAY(70);
++        hprt0.b.prtres = 0; /* Resume */
++        dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++        DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
++}
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++                dctl_data_t dctl = {.d32=0};
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++                            dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++                if (core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++
++                        power.d32 = dwc_read_reg32(core_if->pcgcctl);
++                        DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++                        power.b.stoppclk = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.pwrclmp = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 0;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++                }
++#endif
++                /* Clear the Remote Wakeup Signalling */
++                dctl.b.rmtwkupsig = 1;
++                dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++                                  dctl.d32, 0);
++
++                if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++                        core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++                }
++
++        } else {
++		pcgcctl_data_t pcgcctl = {.d32=0};
++
++		/* Restart the Phy Clock */
++	        pcgcctl.b.stoppclk = 1;
++	        dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++	        queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
++        }
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++                    (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
++                    op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++        if (core_if->op_state == B_HOST) {
++		dwc_otg_pcd_t *pcd;
++
++                /* If in device mode Disconnect and stop the HCD, then
++                 * start the PCD. */
++                hcd_disconnect(core_if);
++
++		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++		if(unlikely(!pcd)) {
++			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++			BUG();
++		}
++		SPIN_LOCK(&pcd->lock);
++
++                pcd_start(core_if);
++
++		SPIN_UNLOCK(&pcd->lock);
++                core_if->op_state = B_PERIPHERAL;
++        } else if (dwc_otg_is_device_mode(core_if)) {
++                gotgctl_data_t gotgctl = { .d32 = 0 };
++                gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++                if (gotgctl.b.hstsethnpen==1) {
++                        /* Do nothing, if HNP in process the OTG
++                         * interrupt "Host Negotiation Detected"
++                         * interrupt will do the mode switch.
++                         */
++                } else if (gotgctl.b.devhnpen == 0) {
++			dwc_otg_pcd_t *pcd;
++
++                        /* If in device mode Disconnect and stop the HCD, then
++                         * start the PCD. */
++                        hcd_disconnect(core_if);
++
++			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_start(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++
++                        core_if->op_state = B_PERIPHERAL;
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++                }
++        } else {
++                if (core_if->op_state == A_HOST) {
++                        /* A-Cable still connected but device disconnected. */
++                        hcd_disconnect(core_if);
++                }
++        }
++#endif
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
++{
++        dsts_data_t dsts;
++        gintsts_data_t gintsts;
++
++        DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++        if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_pcd_t *pcd;
++
++                /* Check the Device status register to determine if the Suspend
++                 * state is active. */
++                dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++                DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++                DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++                            "HWCFG4.power Optimize=%d\n",
++                            dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++                if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++                        pcgcctl_data_t power = {.d32=0};
++                        DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++                        power.b.pwrclmp = 1;
++                        dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++                        power.b.rstpdwnmodule = 1;
++                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++
++                        power.b.stoppclk = 1;
++                        dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++                } else {
++                        DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++                }
++#endif
++                /* PCD callback for suspend. */
++		pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++		if(unlikely(!pcd)) {
++			DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++			BUG();
++		}
++		SPIN_LOCK(&pcd->lock);
++
++                pcd_suspend(core_if);
++
++		SPIN_UNLOCK(&pcd->lock);
++        } else {
++                if (core_if->op_state == A_PERIPHERAL) {
++			dwc_otg_pcd_t *pcd;
++
++                        DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++                        /* Clear the a_peripheral flag, back to a_host. */
++
++			pcd=(dwc_otg_pcd_t *)core_if->pcd_cb->p;
++			if(unlikely(!pcd)) {
++				DWC_ERROR("%s: data structure not initialized properly, core_if->pcd_cb->p = NULL!!!",__func__);
++				BUG();
++			}
++			SPIN_LOCK(&pcd->lock);
++
++                        pcd_stop(core_if);
++
++			SPIN_UNLOCK(&pcd->lock);
++
++                        hcd_start(core_if);
++                        core_if->op_state = A_HOST;
++                }
++        }
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++        return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
++{
++        gintsts_data_t gintsts;
++        gintmsk_data_t gintmsk;
++        gintmsk_data_t gintmsk_common = {.d32=0};
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++        gintmsk_common.b.disconnect = 1;
++        gintmsk_common.b.usbsuspend = 1;
++        /** @todo: The port interrupt occurs while in device
++         * mode. Added code to CIL to clear the interrupt for now!
++         */
++        gintmsk_common.b.portintr = 1;
++
++        gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
++        gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++        /* if any common interrupts set */
++        if (gintsts.d32 & gintmsk_common.d32) {
++                DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n",
++                            gintsts.d32, gintmsk.d32);
++        }
++#endif
++
++        return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ *
++ */
++int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
++{
++	int retval = 0;
++        gintsts_data_t gintsts;
++
++        gintsts.d32 = dwc_otg_read_common_intr(core_if);
++
++        if (gintsts.b.modemismatch) {
++                retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++        }
++        if (gintsts.b.otgintr) {
++                retval |= dwc_otg_handle_otg_intr(core_if);
++        }
++        if (gintsts.b.conidstschng) {
++                retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
++        }
++        if (gintsts.b.disconnect) {
++                retval |= dwc_otg_handle_disconnect_intr(core_if);
++        }
++        if (gintsts.b.sessreqintr) {
++                retval |= dwc_otg_handle_session_req_intr(core_if);
++        }
++        if (gintsts.b.wkupintr) {
++                retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++        }
++        if (gintsts.b.usbsuspend) {
++                retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++        }
++        if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++                /* The port interrupt occurs while in device mode with HPRT0
++                 * Port Enable/Disable.
++                 */
++                gintsts.d32 = 0;
++                gintsts.b.portintr = 1;
++                dwc_write_reg32(&core_if->core_global_regs->gintsts,
++                                gintsts.d32);
++                retval |= 1;
++
++        }
++
++	S3C2410X_CLEAR_EINTPEND();
++
++        return retval;
++}
+--- /dev/null
++++ b/drivers/usb/dwc/otg_driver.c
+@@ -0,0 +1,965 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
++ * $Revision: #63 $
++ * $Date: 2008/09/24 $
++ * $Change: 1101777 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h>	 /* permission constants */
++#include <linux/version.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <asm/io.h>
++
++#include <asm/sizes.h>
++#include <mach/pm.h>
++
++#include "otg_plat.h"
++#include "otg_attr.h"
++#include "otg_driver.h"
++#include "otg_cil.h"
++#include "otg_pcd.h"
++#include "otg_hcd.h"
++
++#define DWC_DRIVER_VERSION	"2.72a 24-JUN-2008"
++#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++	.opt = -1,
++	.otg_cap = -1,
++	.dma_enable = -1,
++	.dma_desc_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = {
++		/* dev_perio_tx_fifo_size_1 */
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1
++		/* 15 */
++	},
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++	.phy_utmi_width = -1,
++	.phy_ulpi_ddr = -1,
++	.phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = {
++		/* dev_tx_fifo_size */
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1,
++		-1
++		/* 15 */
++	},
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++	.pti_enable = -1,
++	.mpi_enable = -1,
++};
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0; /* OFF */
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++	int i;
++	int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++		((dwc_otg_module_params._param_ < (_low_)) || \
++		(dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values.  If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
++		do { \
++			if (dwc_otg_module_params._param_ != -1) { \
++				if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
++					DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++						  dwc_otg_module_params._param_, _string_); \
++					dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++					retval++; \
++				} \
++			} \
++		} while (0)
++
++	DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++	DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++	DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++	DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
++	DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++	DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++	DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++	DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++	DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++	DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++	DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++	DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++	DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++	DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++	DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++	DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++	DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++	DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++	DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++		    DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
++			DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
++				  dwc_otg_module_params.dma_burst_size);
++			dwc_otg_module_params.dma_burst_size = 32;
++			retval++;
++		}
++
++		{
++			uint8_t brst_sz = 0;
++			while(dwc_otg_module_params.dma_burst_size > 1) {
++				brst_sz ++;
++				dwc_otg_module_params.dma_burst_size >>= 1;
++			}
++			dwc_otg_module_params.dma_burst_size = brst_sz;
++		}
++	}
++
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
++		    DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
++			DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
++				  dwc_otg_module_params.phy_utmi_width);
++			dwc_otg_module_params.phy_utmi_width = 16;
++			retval++;
++		}
++	}
++
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++				dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++
++	for (i = 0; i < 15; i++) {
++		/** @todo should be like above */
++		//DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++				DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++					  dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
++				dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++				retval++;
++			}
++		}
++	}
++
++	DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++	DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++	DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++	DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
++	DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
++
++	/* At this point, all module parameters that have been set by the user
++	 * are valid, and those that have not are left unset.  Now set their
++	 * default values and/or check the parameters against the hardware
++	 * configurations of the OTG core. */
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++	({ \
++		int changed = 1; \
++		if (dwc_otg_module_params._param_ == -1) { \
++			changed = 0; \
++			dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++		} \
++		changed; \
++	})
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid.  It is possible that the default value could be invalid. In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
++	({ \
++		int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++		int error = 0; \
++		if (!(_is_valid_)) { \
++			if (changed) { \
++				DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
++				error = 1; \
++			} \
++			dwc_otg_module_params._param_ = (_set_valid_); \
++		} \
++		error; \
++	})
++
++	/* OTG Cap */
++	retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
++				({
++					int valid;
++					valid = 1;
++					switch (dwc_otg_module_params.otg_cap) {
++					case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++						if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++							valid = 0;
++						break;
++					case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++						if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++						    (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++							valid = 0;
++						}
++						break;
++					case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++						/* always valid */
++						break;
++					}
++					valid;
++				}),
++				(((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++				  (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++				 DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++				 DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
++				((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
++				0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
++				((dwc_otg_module_params.dma_desc_enable == 1) &&
++				 ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
++				0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++				"host_support_fs_ls_low_power",
++				1, 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++					"enable_dynamic_fifo",
++					((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++					(core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++					"data_fifo_size",
++					(dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++					core_if->hwcfg3.b.dfifo_depth);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++					"dev_rx_fifo_size",
++					(dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++					"dev_nperio_tx_fifo_size",
++					(dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++					"host_rx_fifo_size",
++					(dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++					dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++					"host_nperio_tx_fifo_size",
++					(dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++					(dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++					"host_perio_tx_fifo_size",
++					(dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++					((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++					"max_transfer_size",
++					(dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++					((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++					"max_packet_count",
++					(dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++					((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++					"host_channels",
++					(dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++					(core_if->hwcfg2.b.num_host_chan + 1));
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++					"dev_endpoints",
++					(dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++					core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking.  This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++				"phy_type", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++				"phy_type",
++				({
++					int valid = 0;
++					if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++					((core_if->hwcfg2.b.hs_phy_type == 1) ||
++					 (core_if->hwcfg2.b.hs_phy_type == 3))) {
++						valid = 1;
++					}
++					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++						 ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++						  (core_if->hwcfg2.b.hs_phy_type == 3))) {
++						valid = 1;
++					}
++					else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++						 (core_if->hwcfg2.b.fs_phy_type == 1)) {
++						valid = 1;
++					}
++					valid;
++				}),
++				({
++					int set = DWC_PHY_TYPE_PARAM_FS;
++					if (core_if->hwcfg2.b.hs_phy_type) {
++						if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++						(core_if->hwcfg2.b.hs_phy_type == 1)) {
++							set = DWC_PHY_TYPE_PARAM_UTMI;
++						}
++						else {
++							set = DWC_PHY_TYPE_PARAM_ULPI;
++						}
++					}
++					set;
++				}));
++#endif
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
++				(dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++				dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++				"host_ls_low_power_phy_clk",
++				((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++				((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++	DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++	DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++	DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++	DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
++#else
++	retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++				"i2c_enable",
++				(dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++				0);
++#endif
++
++	for (i = 0; i < 15; i++) {
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
++						((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
++						0);
++
++	for (i = 0; i < 15; i++) {
++		int changed = 1;
++		int error = 0;
++
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++			changed = 0;
++			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++		}
++		if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++			if (changed) {
++				DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
++				error = 1;
++			}
++			dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++		}
++		retval += error;
++	}
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
++				((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
++				0);
++
++	DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++	DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
++		((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
++			0);
++
++	retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
++			((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
++			0);
++	return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
++{
++	dwc_otg_device_t *otg_dev = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr(otg_dev->core_if);
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a lm_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param[in] lmdev
++ */
++static int dwc_otg_driver_cleanup(struct platform_device *pdev)
++{
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++	DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
++
++	if (!otg_dev) {
++		/* Memory allocation for the dwc_otg_device failed. */
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return 0;
++	}
++
++	/*
++	 * Free the IRQ
++	 */
++	if (otg_dev->common_irq_installed) {
++		free_irq(otg_dev->irq, otg_dev);
++	}
++
++#ifndef DWC_DEVICE_ONLY
++	if (otg_dev->hcd) {
++		dwc_otg_hcd_remove(pdev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return 0;
++	}
++#endif
++
++#ifndef DWC_HOST_ONLY
++	if (otg_dev->pcd) {
++		dwc_otg_pcd_remove(pdev);
++	}
++#endif
++	if (otg_dev->core_if) {
++		dwc_otg_cil_remove(otg_dev->core_if);
++	}
++
++	/*
++	 * Remove the device attributes
++	 */
++	dwc_otg_attr_remove(pdev);
++
++	/*
++	 * Return the memory.
++	 */
++	if (otg_dev->base) {
++		iounmap(otg_dev->base);
++	}
++	kfree(otg_dev);
++
++	/*
++	 * Clear the drvdata pointer.
++	 */
++	platform_set_drvdata(pdev, 0);
++
++	return 0;
++}
++
++/**
++ * This function is called when an lm_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param[in] lmdev  lm_device definition
++ */
++static int __devinit dwc_otg_driver_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	int retval = 0;
++	uint32_t snpsid;
++	dwc_otg_device_t *dwc_otg_device;
++	struct resource *res;
++
++	dev_dbg(dev, "dwc_otg_driver_probe(%p)\n", pdev);
++
++	dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++
++	if (!dwc_otg_device) {
++		dev_err(dev, "kmalloc of dwc_otg_device failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++	dwc_otg_device->reg_offset = 0xFFFFFFFF;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(dev, "Found OTG with no register addr.\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dwc_otg_device->rsrc_start = res->start;
++	dwc_otg_device->rsrc_len = res->end - res->start + 1;
++
++	dwc_otg_device->base = ioremap(dwc_otg_device->rsrc_start, dwc_otg_device->rsrc_len);
++
++	if (!dwc_otg_device->base) {
++		dev_err(dev, "ioremap() failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++	dev_dbg(dev, "base=0x%08x\n", (unsigned)dwc_otg_device->base);
++
++	/*
++	 * Attempt to ensure this device is really a DWC_otg Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++	 */
++	snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
++
++	if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
++		dev_err(dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	DWC_PRINT("Core Release: %x.%x%x%x\n",
++			(snpsid >> 12 & 0xF),
++			(snpsid >> 8 & 0xF),
++			(snpsid >> 4 & 0xF),
++			(snpsid & 0xF));
++
++	/*
++	 * Initialize driver data to point to the global DWC_otg
++	 * Device structure.
++	 */
++	platform_set_drvdata(pdev, dwc_otg_device);
++
++	dev_dbg(dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++
++	dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->base,
++						   &dwc_otg_module_params);
++
++	dwc_otg_device->core_if->snpsid = snpsid;
++
++	if (!dwc_otg_device->core_if) {
++		dev_err(dev, "CIL initialization failed!\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	/*
++	 * Validate parameter values.
++	 */
++	if (check_parameters(dwc_otg_device->core_if)) {
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Create Device Attributes in sysfs
++	 */
++	dwc_otg_attr_create(pdev);
++
++	/*
++	 * Disable the global interrupt until all the interrupt
++	 * handlers are installed.
++	 */
++	dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
++
++	/*
++	 * Install the interrupt handler for the common interrupts before
++	 * enabling common interrupts in core_init below.
++	 */
++	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!res) {
++		dev_err(dev, "Fount OTG with to IRQ.\n");
++		retval = -ENODEV;
++		goto fail;
++	}
++	dwc_otg_device->irq = res->start;
++
++	retval = request_irq(res->start, dwc_otg_common_irq,
++			     IRQF_SHARED, "dwc_otg", dwc_otg_device);
++	if (retval) {
++		DWC_ERROR("request of irq%d failed\n", res->start);
++		retval = -EBUSY;
++		goto fail;
++	} else {
++		dwc_otg_device->common_irq_installed = 1;
++	}
++
++	/*
++	 * Initialize the DWC_otg core.
++	 */
++	dwc_otg_core_init(dwc_otg_device->core_if);
++
++#ifndef DWC_HOST_ONLY
++	/*
++	 * Initialize the PCD
++	 */
++	retval = dwc_otg_pcd_init(pdev);
++	if (retval != 0) {
++		DWC_ERROR("dwc_otg_pcd_init failed\n");
++		dwc_otg_device->pcd = NULL;
++		goto fail;
++	}
++#endif
++#ifndef DWC_DEVICE_ONLY
++	/*
++	 * Initialize the HCD
++	 */
++	retval = dwc_otg_hcd_init(pdev);
++	if (retval != 0) {
++		DWC_ERROR("dwc_otg_hcd_init failed\n");
++		dwc_otg_device->hcd = NULL;
++		goto fail;
++	}
++#endif
++
++	/*
++	 * Enable the global interrupt after all the interrupt
++	 * handlers are installed.
++	 */
++	dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
++
++	return 0;
++
++ fail:
++	dwc_otg_driver_cleanup(pdev);
++	return retval;
++}
++
++static int __devexit dwc_otg_driver_remove(struct platform_device *pdev)
++{
++	return dwc_otg_driver_cleanup(pdev);
++}
++
++static struct platform_driver dwc_otg_platform_driver = {
++	.driver.name = "dwc_otg",
++	.probe = dwc_otg_driver_probe,
++	.remove = __devexit_p(dwc_otg_driver_remove),
++};
++
++static int __init dwc_otg_init_module(void)
++{
++	return platform_driver_register(&dwc_otg_platform_driver);
++}
++
++static void __exit dwc_otg_cleanup_module(void)
++{
++	platform_driver_unregister(&dwc_otg_platform_driver);
++}
++
++module_init(dwc_otg_init_module);
++module_exit(dwc_otg_cleanup_module);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
++MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
++
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
+--- /dev/null
++++ b/drivers/usb/dwc/otg_driver.h
+@@ -0,0 +1,62 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: #12 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++	void *base;
++	dwc_otg_core_if_t *core_if;
++	uint32_t reg_offset;
++	struct dwc_otg_pcd *pcd;
++	struct dwc_otg_hcd *hcd;
++	uint8_t common_irq_installed;
++	int irq;
++	uint32_t rsrc_start;
++	uint32_t rsrc_len;
++} dwc_otg_device_t;
++
++#endif
+--- /dev/null
++++ b/drivers/usb/dwc/otg_hcd.c
+@@ -0,0 +1,2735 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: #75 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064940 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include <mach/irqs.h>
++
++#include "otg_driver.h"
++#include "otg_hcd.h"
++#include "otg_regs.h"
++
++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
++
++static const struct hc_driver dwc_otg_hc_driver = {
++
++	.description =		dwc_otg_hcd_name,
++	.product_desc = 	"DWC OTG Controller",
++	.hcd_priv_size = 	sizeof(dwc_otg_hcd_t),
++	.irq =			dwc_otg_hcd_irq,
++	.flags =		HCD_MEMORY | HCD_USB2,
++	.start =		dwc_otg_hcd_start,
++	.stop =			dwc_otg_hcd_stop,
++	.urb_enqueue =		dwc_otg_hcd_urb_enqueue,
++	.urb_dequeue =		dwc_otg_hcd_urb_dequeue,
++	.endpoint_disable =	dwc_otg_hcd_endpoint_disable,
++	.get_frame_number =	dwc_otg_hcd_get_frame_number,
++	.hub_status_data =	dwc_otg_hcd_hub_status_data,
++	.hub_control =		dwc_otg_hcd_hub_control,
++};
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(struct work_struct *_work)
++{
++	struct delayed_work *dw = container_of(_work, struct delayed_work, work);
++	struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
++	struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++	if (usb_hcd) {
++		dwc_otg_hcd_start(usb_hcd);
++	}
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	if (core_if->op_state == B_HOST) {
++		/*
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms.
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtrst = 1;
++		dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++		((struct usb_hcd *)p)->self.is_b_host = 1;
++	} else {
++		((struct usb_hcd *)p)->self.is_b_host = 0;
++	}
++
++	/* Need to start the HCD in a non-interrupt context. */
++//	INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++	INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++//	schedule_work(&dwc_otg_hcd->start_work);
++	queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++	struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_stop(usb_hcd);
++	return 1;
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		del_timer(&hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t *hcd)
++{
++	del_xfer_timers(hcd);
++	del_timer(&hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++	struct list_head	*qh_item;
++	dwc_otg_qh_t		*qh;
++	struct list_head	*qtd_item;
++	dwc_otg_qtd_t		*qtd;
++
++	list_for_each(qh_item, qh_list) {
++		qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++		for (qtd_item = qh->qtd_list.next;
++		     qtd_item != &qh->qtd_list;
++		     qtd_item = qh->qtd_list.next) {
++			qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++			if (qtd->urb != NULL) {
++				dwc_otg_hcd_complete_urb(hcd, qtd->urb,
++							 -ETIMEDOUT);
++			}
++			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *hcd)
++{
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++	gintsts_data_t 	intr;
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++
++	//DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++
++	/*
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++			hprt0_data_t hprt0 = { .d32=0 };
++			DWC_PRINT("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int			num_channels;
++		int			i;
++		dwc_hc_t		*channel;
++		dwc_otg_hc_regs_t	*hc_regs;
++		hcchar_data_t		hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (list_empty(&channel->hc_list_entry)) {
++					hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++					hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (list_empty(&channel->hc_list_entry)) {
++				hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++				list_add_tail(&channel->hc_list_entry,
++					      &dwc_otg_hcd->free_hc_list);
++			}
++		}
++	}
++
++	/* A disconnect will end the session so the B-Device is no
++	 * longer a B-host. */
++	((struct usb_hcd *)p)->self.is_b_host = 0;
++	return 1;
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(unsigned long ptr)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
++	DWC_PRINT("Connect Timeout\n");
++	DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
++{
++	init_timer(&hcd->conn_timer);
++	hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++	hcd->conn_timer.data = 0;
++	hcd->conn_timer.expires = jiffies + (HZ * 10);
++	add_timer(&hcd->conn_timer);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++	return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(unsigned long data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtrst = 1;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	mdelay(60);
++
++	hprt0.b.prtrst = 0;
++	dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static struct tasklet_struct reset_tasklet = {
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = reset_tasklet_func,
++	.data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int dwc_otg_hcd_init(struct platform_device *pdev)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++
++	int 		num_channels;
++	int 		i;
++	dwc_hc_t	*channel;
++
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (otg_dev->core_if->dma_enable) {
++		DWC_PRINT("Using DMA mode\n");
++
++		if (otg_dev->core_if->dma_desc_enable) {
++			DWC_PRINT("Device using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINT("Device using Buffer DMA mode\n");
++		}
++	}
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &pdev->dev, "gadget");
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++
++	hcd->regs = otg_dev->base;
++	hcd->self.otg_port = 1;
++
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd->core_if = otg_dev->core_if;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	/* */
++	spin_lock_init(&dwc_otg_hcd->lock);
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
++					   &hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++
++	/* Initialize the periodic schedule. */
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++	INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++	num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++	memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
++	for (i = 0; i < num_channels; i++) {
++		channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++		if (channel == NULL) {
++			retval = -ENOMEM;
++			DWC_ERROR("%s: host channel allocation failed\n", __func__);
++			goto error2;
++		}
++		memset(channel, 0, sizeof(dwc_hc_t));
++		channel->hc_num = i;
++		dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	init_timer(&dwc_otg_hcd->conn_timer);
++
++	/* Initialize reset tasklet. */
++	reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++	dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls dwc_otg_hcd_start method.
++	 */
++	retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++	if (retval < 0) {
++		goto error2;
++	}
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (otg_dev->core_if->dma_enable) {
++		dwc_otg_hcd->status_buf =
++			dma_alloc_coherent(&pdev->dev,
++					   DWC_OTG_HCD_STATUS_BUF_SIZE,
++					   &dwc_otg_hcd->status_buf_dma,
++					   GFP_KERNEL | GFP_DMA);
++	} else {
++		dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++						  GFP_KERNEL);
++	}
++	if (!dwc_otg_hcd->status_buf) {
++		retval = -ENOMEM;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		goto error3;
++	}
++
++	dwc_otg_hcd->otg_dev = otg_dev;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, usbbus=%d\n",
++		    hcd->self.busnum);
++	return 0;
++
++	/* Error conditions */
++ error3:
++	usb_remove_hcd(hcd);
++ error2:
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++ error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct platform_device *pdev)
++{
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	struct usb_hcd *hcd;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++	if (!otg_dev) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return;
++	}
++
++	dwc_otg_hcd = otg_dev->hcd;
++
++	if (!dwc_otg_hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return;
++	}
++
++	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	if (!hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
++		return;
++	}
++
++	/* Turn off all interrupts */
++	dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++	dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++	usb_remove_hcd(hcd);
++	dwc_otg_hcd_free(hcd);
++	usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *hcd)
++{
++	struct list_head 	*item;
++	int			num_channels;
++	int			i;
++	dwc_hc_t		*channel;
++
++	hcd->flags.d32 = 0;
++
++	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++	hcd->non_periodic_channels = 0;
++	hcd->periodic_channels = 0;
++
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	item = hcd->free_hc_list.next;
++	while (item != &hcd->free_hc_list) {
++		list_del(item);
++		item = hcd->free_hc_list.next;
++	}
++	num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = hcd->hc_ptr_array[i];
++		list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
++		dwc_otg_hc_cleanup(hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++  	struct usb_bus *bus;
++
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++	bus = hcd_to_bus(hcd);
++
++	/* Initialize the bus state.  If the core is in Device Mode
++	 * HALT the USB bus and return. */
++	if (dwc_otg_is_device_mode(core_if)) {
++		hcd->state = HC_STATE_RUNNING;
++		return 0;
++	}
++	hcd->state = HC_STATE_RUNNING;
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(hcd);
++	}
++	else {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
++	}
++
++	hcd_reinit(dwc_otg_hcd);
++
++	return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++	struct list_head 	*item;
++	dwc_otg_qh_t		*qh;
++
++	if (!qh_list->next) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(hcd, qh_list);
++
++	for (item = qh_list->next; item != qh_list; item = qh_list->next) {
++		qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++	}
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	hprt0_data_t hprt0 = { .d32=0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off the vbus power */
++	DWC_PRINT("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++}
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	hfnum_data_t hfnum;
++
++	hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++				   host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif
++	return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t 	*dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	int		i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++			kfree(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			dma_free_coherent(hcd->self.controller,
++					  DWC_OTG_HCD_STATUS_BUF_SIZE,
++					  dwc_otg_hcd->status_buf,
++					  dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		kfree(dwc_otg_hcd->status_buf);
++	}
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char* fn_name)
++{
++	DWC_PRINT("%s, urb %p\n", fn_name, urb);
++	DWC_PRINT("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_PRINT("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINT("  Endpoint type: %s\n",
++		  ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		   }; pipetype;}));
++	DWC_PRINT("  Speed: %s\n",
++		  ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		   }; speed;}));
++	DWC_PRINT("  Max packet size: %d\n",
++		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_PRINT("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_PRINT("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_PRINT("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_PRINT("  Interval: %d\n", urb->interval);
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < urb->number_of_packets;  i++) {
++			DWC_PRINT("  ISO Desc %d:\n", i);
++			DWC_PRINT("    offset: %d, length %d\n",
++				  urb->iso_frame_desc[i].offset,
++				  urb->iso_frame_desc[i].length);
++		}
++	}
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *hcd,
++			      dwc_otg_qh_t *qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		struct list_head *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t 	hcchar;
++		hcsplt_data_t	hcsplt;
++		hctsiz_data_t 	hctsiz;
++		uint32_t	hcdma;
++
++		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++		DWC_PRINT("  Assigned to channel %p:\n", hc);
++		DWC_PRINT("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++		DWC_PRINT("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		DWC_PRINT("  NP inactive sched:\n");
++		list_for_each(item, &hcd->non_periodic_sched_inactive) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		}
++		DWC_PRINT("  NP active sched:\n");
++		list_for_each(item, &hcd->non_periodic_sched_active) {
++			qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINT("    %p\n", qh_item);
++		}
++		DWC_PRINT("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = hcd->hc_ptr_array[i];
++			DWC_PRINT("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#endif
++
++
++//OTG host require the DMA addr is DWORD-aligned,
++//patch it if the buffer is not DWORD-aligned
++inline
++void hcd_check_and_patch_dma_addr(struct urb *urb){
++
++	if((!urb->transfer_buffer)||!urb->transfer_dma||urb->transfer_dma==0xffffffff)
++		return;
++
++	if(((u32)urb->transfer_buffer)& 0x3){
++		/*
++		printk("%s: "
++			"urb(%.8x) "
++			"transfer_buffer=%.8x, "
++			"transfer_dma=%.8x, "
++			"transfer_buffer_length=%d, "
++			"actual_length=%d(%x), "
++			"\n",
++			((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT)?"OUT":"IN",
++			urb,
++			urb->transfer_buffer,
++			urb->transfer_dma,
++			urb->transfer_buffer_length,
++			urb->actual_length,urb->actual_length
++		);
++		*/
++		if(!urb->aligned_transfer_buffer||urb->aligned_transfer_buffer_length<urb->transfer_buffer_length){
++			urb->aligned_transfer_buffer_length=urb->transfer_buffer_length;
++			if(urb->aligned_transfer_buffer) {
++				kfree(urb->aligned_transfer_buffer);
++			}
++			urb->aligned_transfer_buffer=kmalloc(urb->aligned_transfer_buffer_length,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
++			urb->aligned_transfer_dma=dma_map_single(NULL,(void *)(urb->aligned_transfer_buffer),(urb->aligned_transfer_buffer_length),DMA_FROM_DEVICE);
++			if(!urb->aligned_transfer_buffer){
++				DWC_ERROR("Cannot alloc required buffer!!\n");
++				BUG();
++			}
++			//printk(" new allocated aligned_buf=%.8x aligned_buf_len=%d\n", (u32)urb->aligned_transfer_buffer, urb->aligned_transfer_buffer_length);
++		}
++		urb->transfer_dma=urb->aligned_transfer_dma;
++		if((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT) {
++			memcpy(urb->aligned_transfer_buffer,urb->transfer_buffer,urb->transfer_buffer_length);
++			dma_sync_single_for_device(NULL,urb->transfer_dma,urb->transfer_buffer_length,DMA_TO_DEVICE);
++		}
++	}
++}
++
++
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++//			    struct usb_host_endpoint *ep,
++			    struct urb *urb,
++			    gfp_t mem_flags
++			  )
++{
++	int retval = 0;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_qtd_t *qtd;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
++	}
++#endif
++	if (!dwc_otg_hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		return -ENODEV;
++	}
++
++	hcd_check_and_patch_dma_addr(urb);
++	qtd = dwc_otg_hcd_qtd_create(urb);
++	if (qtd == NULL) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -ENOMEM;
++	}
++
++	retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++			  "Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++			    struct urb *urb, int status)
++{
++	unsigned long flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	dwc_otg_qtd_t *urb_qtd;
++	dwc_otg_qh_t *qh;
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++	urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
++		if (urb_qtd == qh->qtd_in_process) {
++			dump_channel_info(dwc_otg_hcd, qh);
++		}
++	}
++#endif
++
++	if (urb_qtd == qh->qtd_in_process) {
++		/* The QTD is in process (it has been assigned to a channel). */
++
++		if (dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++	dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
++	if (urb_qtd == qh->qtd_in_process) {
++		dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++		qh->channel = NULL;
++		qh->qtd_in_process = NULL;
++	} else if (list_empty(&qh->qtd_list)) {
++		dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++	urb->hcpriv = NULL;
++
++	/* Higher layer software sets URB status. */
++	usb_hcd_giveback_urb(hcd, urb, status);
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++		DWC_PRINT("  urb->status = %d\n", urb->status);
++	}
++
++	return 0;
++}
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++				  struct usb_host_endpoint *ep)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_qh_t *qh;
++
++	unsigned long flags;
++	int retry = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++		    "endpoint=%d\n", ep->desc.bEndpointAddress,
++		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++
++rescan:
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++	qh = (dwc_otg_qh_t *)(ep->hcpriv);
++	if (!qh)
++		goto done;
++
++	/** Check that the QTD list is really empty */
++	if (!list_empty(&qh->qtd_list)) {
++		if (retry++ < 250) {
++			SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++			schedule_timeout_uninterruptible(1);
++			goto rescan;
++		}
++
++		DWC_WARN("DWC OTG HCD EP DISABLE:"
++			 " QTD List for this endpoint is not empty\n");
++	}
++
++	dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++	ep->hcpriv = NULL;
++done:
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++}
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
++{
++        int retVal = 0;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	retVal = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
++        if (dwc_otg_hcd->flags.b.port_connect_status_change == 1)
++        	usb_hcd_poll_rh_status(hcd);
++	return IRQ_RETVAL(retVal);
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	buf[0] = 0;
++	buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++		    dwc_otg_hcd->flags.b.port_reset_change ||
++		    dwc_otg_hcd->flags.b.port_enable_change ||
++		    dwc_otg_hcd->flags.b.port_suspend_change ||
++		    dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++	if (buf[0]) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++			    " Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++			    dwc_otg_hcd->flags.b.port_over_current_change);
++	}
++#endif
++	return (buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++//		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++	dwc_write_reg32(data_fifo++, 0x01000680);
++	dwc_write_reg32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer */
++		if (grxsts.b.bcnt > 0) {
++			int i;
++			int word_count = (grxsts.b.bcnt + 3) / 4;
++
++			data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++			for (i = 0; i < word_count; i++) {
++				(void)dwc_read_reg32(data_fifo++);
++			}
++		}
++
++		//fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++	break;
++
++	default:
++		//fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++	break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	//fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read RXSTS */
++	grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++	//fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	break;
++
++	default:
++		//fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++	break;
++	}
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++//	usleep(100000);
++//	mdelay(100);
++	mdelay(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		//fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++		//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++		/* Read HAINT */
++		haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++		//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++		/* Read HCINT */
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++		/* Read HCCHAR */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++		/* Clear HCINT */
++		dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		//if (hcchar.b.chen) {
++		//	fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++		//}
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	//fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++	/* Disable HCINTs */
++	dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++	//fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++	/* Read HCINT */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	//fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++	/* Read HCCHAR */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	//fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++	/* Clear HCINT */
++	dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++	//fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++			    u16 typeReq,
++			    u16 wValue,
++			    u16 wIndex,
++			    char *buf,
++			    u16 wLength)
++{
++	int retval = 0;
++
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
++	struct usb_hub_descriptor *desc;
++	hprt0_data_t hprt0 = {.d32 = 0};
++
++	uint32_t port_status;
++
++	switch (typeReq) {
++	case ClearHubFeature:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "ClearHubFeature 0x%x\n", wValue);
++		switch (wValue) {
++		case C_HUB_LOCAL_POWER:
++		case C_HUB_OVER_CURRENT:
++			/* Nothing required here */
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearHubFeature request %xh unknown\n", wValue);
++		}
++		break;
++	case ClearPortFeature:
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		switch (wValue) {
++		case USB_PORT_FEAT_ENABLE:
++			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtena = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtres = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			/* Clear Resume bit */
++			mdelay(100);
++			hprt0.b.prtres = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++			/* Port inidicator not supported */
++			break;
++		case USB_PORT_FEAT_C_CONNECTION:
++			/* Clears drivers internal connect status change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++			break;
++		case USB_PORT_FEAT_C_RESET:
++			/* Clears the driver's internal Port Reset Change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++			dwc_otg_hcd->flags.b.port_reset_change = 0;
++			break;
++		case USB_PORT_FEAT_C_ENABLE:
++			/* Clears the driver's internal Port
++			 * Enable/Disable Change flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++			dwc_otg_hcd->flags.b.port_enable_change = 0;
++			break;
++		case USB_PORT_FEAT_C_SUSPEND:
++			/* Clears the driver's internal Port Suspend
++			 * Change flag, which is set when resume signaling on
++			 * the host port is complete */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++			dwc_otg_hcd->flags.b.port_suspend_change = 0;
++			break;
++		case USB_PORT_FEAT_C_OVER_CURRENT:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++			dwc_otg_hcd->flags.b.port_over_current_change = 0;
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++		}
++		break;
++	case GetHubDescriptor:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubDescriptor\n");
++		desc = (struct usb_hub_descriptor *)buf;
++		desc->bDescLength = 9;
++		desc->bDescriptorType = 0x29;
++		desc->bNbrPorts = 1;
++		desc->wHubCharacteristics = 0x08;
++		desc->bPwrOn2PwrGood = 1;
++		desc->bHubContrCurrent = 0;
++		desc->u.hs.DeviceRemovable[0] = 0;
++		desc->u.hs.DeviceRemovable[1] = 0xff;
++		break;
++	case GetHubStatus:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubStatus\n");
++		memset(buf, 0, 4);
++		break;
++	case GetPortStatus:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetPortStatus\n");
++
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		port_status = 0;
++
++		if (dwc_otg_hcd->flags.b.port_connect_status_change)
++			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++		if (dwc_otg_hcd->flags.b.port_enable_change)
++			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++		if (dwc_otg_hcd->flags.b.port_suspend_change)
++			port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++		if (dwc_otg_hcd->flags.b.port_reset_change)
++			port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++		if (dwc_otg_hcd->flags.b.port_over_current_change) {
++			DWC_ERROR("Device Not Supported\n");
++			port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++		}
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return 0's for the remainder of the port status
++			 * since the port register can't be read if the core
++			 * is in device mode.
++			 */
++			*((__le32 *) buf) = cpu_to_le32(port_status);
++			break;
++		}
++
++		hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++		if (hprt0.b.prtconnsts)
++			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++		if (hprt0.b.prtena)
++			port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++		if (hprt0.b.prtsusp)
++			port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++		if (hprt0.b.prtovrcurract)
++			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++		if (hprt0.b.prtrst)
++			port_status |= (1 << USB_PORT_FEAT_RESET);
++
++		if (hprt0.b.prtpwr)
++			port_status |= (1 << USB_PORT_FEAT_POWER);
++
++		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++			port_status |= (USB_PORT_STAT_HIGH_SPEED);
++		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++			port_status |= (USB_PORT_STAT_LOW_SPEED);
++
++		if (hprt0.b.prttstctl)
++			port_status |= (1 << USB_PORT_FEAT_TEST);
++
++		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++		*((__le32 *) buf) = cpu_to_le32(port_status);
++
++		break;
++	case SetHubFeature:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "SetHubFeature\n");
++		/* No HUB features supported */
++		break;
++	case SetPortFeature:
++		if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
++			goto error;
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			break;
++		}
++
++		switch (wValue) {
++		case USB_PORT_FEAT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++			if (hcd->self.otg_port == wIndex &&
++			    hcd->self.b_hnp_enable) {
++				gotgctl_data_t  gotgctl = {.d32=0};
++				gotgctl.b.hstsethnpen = 1;
++				dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++						  0, gotgctl.d32);
++				core_if->op_state = A_SUSPEND;
++			}
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtsusp = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			//DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
++			/* Suspend the Phy Clock */
++			{
++				pcgcctl_data_t pcgcctl = {.d32=0};
++				pcgcctl.b.stoppclk = 1;
++				dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++			}
++
++			/* For HNP the bus must be suspended for at least 200ms. */
++			if (hcd->self.b_hnp_enable) {
++				mdelay(200);
++				//DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
++			}
++			break;
++		case USB_PORT_FEAT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 1;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case USB_PORT_FEAT_RESET:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_RESET\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			/* When B-Host the Port reset bit is set in
++			 * the Start HCD Callback function, so that
++			 * the reset is started within 1ms of the HNP
++			 * success interrupt. */
++			if (!hcd->self.is_b_host) {
++				hprt0.b.prtrst = 1;
++				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			}
++			/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++			MDELAY(60);
++			hprt0.b.prtrst = 0;
++			dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++
++#ifdef DWC_HS_ELECT_TST
++		case USB_PORT_FEAT_TEST:
++		{
++			uint32_t t;
++			gintmsk_data_t gintmsk;
++
++			t = (wIndex >> 8); /* MSB wIndex USB */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++			warn("USB_PORT_FEAT_TEST %d\n", t);
++			if (t < 6) {
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prttstctl = t;
++				dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++			} else {
++				/* Setup global vars with reg addresses (quick and
++				 * dirty hack, should be cleaned up)
++				 */
++				global_regs = core_if->core_global_regs;
++				hc_global_regs = core_if->host_if->host_global_regs;
++				hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++				data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++				if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Drive suspend on the root port */
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prtsusp = 1;
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Drive resume on the root port */
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prtsusp = 0;
++					hprt0.b.prtres = 1;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++					mdelay(100);
++
++					/* Clear the resume bit */
++					hprt0.b.prtres = 0;
++					dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				} else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* 15 second delay per the test spec */
++					mdelay(15000);
++
++					/* Send the Setup packet */
++					do_setup();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				} else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++					/* Save current interrupt mask */
++					gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++					/* Disable all interrupts while we muck with
++					 * the hardware directly
++					 */
++					dwc_write_reg32(&global_regs->gintmsk, 0);
++
++					/* Send the Setup packet */
++					do_setup();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Send the In and Ack packets */
++					do_in_ack();
++
++					/* 15 second delay so nothing else happens for awhile */
++					mdelay(15000);
++
++					/* Restore interrupts */
++					dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++				}
++			}
++			break;
++		}
++#endif /* DWC_HS_ELECT_TST */
++
++		case USB_PORT_FEAT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++			/* Not supported */
++			break;
++		default:
++			retval = -EINVAL;
++			DWC_ERROR("DWC OTG HCD - "
++				  "SetPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++			break;
++		}
++		break;
++	default:
++	error:
++		retval = -EINVAL;
++		DWC_WARN("DWC OTG HCD - "
++			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			 typeReq, wIndex, wValue);
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	dwc_hc_t	*hc;
++	dwc_otg_qtd_t	*qtd;
++	struct urb	*urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
++
++	hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++	/* Remove the host channel from the free list. */
++	list_del_init(&hc->hc_list_entry);
++
++	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++	urb = qtd->urb;
++	qh->channel = hc;
++	qh->qtd_in_process = qtd;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = usb_pipedevice(urb->pipe);
++	hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (urb->dev->speed == USB_SPEED_LOW) {
++		hc->speed = DWC_OTG_EP_SPEED_LOW;
++	} else if (urb->dev->speed == USB_SPEED_FULL) {
++		hc->speed = DWC_OTG_EP_SPEED_FULL;
++	} else {
++		hc->speed = DWC_OTG_EP_SPEED_HIGH;
++	}
++
++	hc->max_packet = dwc_max_packet(qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++	hc->do_ping = qh->ping_state;
++	hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++	hc->data_pid_start = qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
++	} else {
++		hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++	}
++	hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (qh->do_split) {
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hc->hub_addr = urb->dev->tt->hub->devnum;
++		hc->port_addr = urb->dev->ttport;
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++			hc->do_ping = 0;
++			hc->ep_is_in = 0;
++			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)urb->setup_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)urb->setup_packet;
++			}
++			hc->xfer_len = 8;
++			break;
++		case DWC_OTG_CONTROL_DATA:
++			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++			hc->data_pid_start = qtd->data_toggle;
++			break;
++		case DWC_OTG_CONTROL_STATUS:
++			/*
++			 * Direction is opposite of data direction or IN if no
++			 * data.
++			 */
++			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++			if (urb->transfer_buffer_length == 0) {
++				hc->ep_is_in = 1;
++			} else {
++				hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++			}
++			if (hc->ep_is_in) {
++				hc->do_ping = 0;
++			}
++			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++			hc->xfer_len = 0;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)hcd->status_buf;
++			}
++			break;
++		}
++		break;
++	case PIPE_BULK:
++		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++		break;
++	case PIPE_INTERRUPT:
++		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			struct usb_iso_packet_descriptor *frame_desc;
++			frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *)urb->transfer_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++			}
++			hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++			hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++				if (hc->xfer_len <= 188) {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				}
++				else {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		}
++		break;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(qh->maxp);
++	}
++
++	dwc_otg_hc_init(hcd->core_if, hc);
++	hc->qh = qh;
++}
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
++{
++	struct list_head 		*qh_ptr;
++	dwc_otg_qh_t 			*qh;
++	int				num_channels;
++	dwc_otg_transaction_type_e	ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif
++
++	/* Process entries in the periodic ready list. */
++	qh_ptr = hcd->periodic_sched_ready.next;
++	while (qh_ptr != &hcd->periodic_sched_ready &&
++	       !list_empty(&hcd->free_hc_list)) {
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
++
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = hcd->non_periodic_sched_inactive.next;
++	num_channels = hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++	       (hcd->non_periodic_channels <
++		num_channels - hcd->periodic_channels) &&
++	       !list_empty(&hcd->free_hc_list)) {
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = qh_ptr->next;
++		list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++		hcd->non_periodic_channels++;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *hcd,
++			     dwc_hc_t *hc,
++			     uint16_t fifo_dwords_avail)
++{
++	int retval;
++
++	if (hcd->core_if->dma_enable) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else if (hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (hc->halt_on_queue) {
++		dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++		retval = 0;
++	} else if (hc->do_ping) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++		}
++		retval = 0;
++	} else if (!hc->ep_is_in ||
++		   hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++			if (!hc->xfer_started) {
++				dwc_otg_hc_start_transfer(hcd->core_if, hc);
++				retval = 1;
++			} else {
++				retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++	gnptxsts_data_t		tx_status;
++	struct list_head	*orig_qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int			no_queue_space = 0;
++	int			no_fifo_space = 0;
++	int			more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0};
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++		tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++	hptxsts_data_t		tx_status;
++	struct list_head	*qh_ptr;
++	dwc_otg_qh_t		*qh;
++	int			status;
++	int 			no_queue_space = 0;
++	int			no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &hcd->periodic_sched_assigned) {
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if (!hcd->core_if->dma_enable &&
++		    qh->channel->multi_count > 1)
++		{
++			hcd->core_if->queuing_high_bandwidth = 1;
++		}
++
++		status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (hcd->core_if->dma_enable || status == 0 ||
++		    qh->channel->requests == qh->channel->multi_count) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
++
++			/* done queuing high bandwidth */
++			hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0};
++
++		global_regs = hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++		tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.ptxfspcavail);
++#endif
++		if (!list_empty(&hcd->periodic_sched_assigned) ||
++		    no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++				    dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
++	    !list_empty(&hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++	    tr_type == DWC_OTG_TRANSACTION_ALL) {
++		if (!list_empty(&hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0};
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
++					 gintmsk.d32, 0);
++		}
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
++{
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++			  __func__, urb, usb_pipedevice(urb->pipe),
++			  usb_pipeendpoint(urb->pipe),
++			  usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < urb->number_of_packets; i++) {
++				DWC_PRINT("  ISO Desc %d status: %d\n",
++					  i, urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++#endif
++
++	//if we use the aligned buffer instead of the original unaligned buffer,
++	//for IN data, we have to move the data to the original buffer
++	if((urb->transfer_dma==urb->aligned_transfer_dma)&&((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_IN)){
++		dma_sync_single_for_device(NULL,urb->transfer_dma,urb->actual_length,DMA_FROM_DEVICE);
++		memcpy(urb->transfer_buffer,urb->aligned_transfer_buffer,urb->actual_length);
++	}
++
++
++	urb->status = status;
++	urb->hcpriv = NULL;
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
++{
++	struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++	return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t *setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)){
++		DWC_PRINT("Setup Data = MSB ");
++		for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
++		DWC_PRINT("\n");
++		DWC_PRINT("  bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
++		DWC_PRINT("  bmRequestType Type = ");
++		switch ((setup[0] & 0x60) >> 5) {
++		case 0: DWC_PRINT("Standard\n"); break;
++		case 1:	DWC_PRINT("Class\n"); break;
++		case 2:	DWC_PRINT("Vendor\n"); break;
++		case 3: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bmRequestType Recipient = ");
++		switch (setup[0] & 0x1f) {
++		case 0: DWC_PRINT("Device\n"); break;
++		case 1: DWC_PRINT("Interface\n"); break;
++		case 2: DWC_PRINT("Endpoint\n"); break;
++		case 3: DWC_PRINT("Other\n"); break;
++		default: DWC_PRINT("Reserved\n"); break;
++		}
++		DWC_PRINT("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINT("  wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++		DWC_PRINT("  wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++		DWC_PRINT("  wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t	np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_PRINT("\n");
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("HCD State:\n");
++	DWC_PRINT("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = hcd->hc_ptr_array[i];
++		DWC_PRINT("  Channel %d:\n", i);
++		DWC_PRINT("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			  hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINT("    speed: %d\n", hc->speed);
++		DWC_PRINT("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINT("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINT("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINT("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINT("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINT("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINT("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINT("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINT("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINT("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINT("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINT("    do_split: %d\n", hc->do_split);
++		DWC_PRINT("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINT("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINT("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINT("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINT("    requests: %d\n", hc->requests);
++		DWC_PRINT("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++			hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
++			hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
++			hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
++			hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++			DWC_PRINT("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINT("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINT("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINT("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINT("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
++			dwc_otg_qtd_t *qtd;
++			struct urb *urb;
++			qtd = hc->qh->qtd_in_process;
++			urb = qtd->urb;
++			DWC_PRINT("    URB Info:\n");
++			DWC_PRINT("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb) {
++				DWC_PRINT("      Dev: %d, EP: %d %s\n",
++					  usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++					  usb_pipein(urb->pipe) ? "IN" : "OUT");
++				DWC_PRINT("      Max packet size: %d\n",
++					  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++				DWC_PRINT("      transfer_buffer: %p\n", urb->transfer_buffer);
++				DWC_PRINT("      transfer_dma: %p\n", (void *)urb->transfer_dma);
++				DWC_PRINT("      transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++				DWC_PRINT("      actual_length: %d\n", urb->actual_length);
++			}
++		}
++	}
++	DWC_PRINT("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
++	DWC_PRINT("  periodic_channels: %d\n", hcd->periodic_channels);
++	DWC_PRINT("  periodic_usecs: %d\n", hcd->periodic_usecs);
++	np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINT("  NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++	DWC_PRINT("  NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINT("  P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++	DWC_PRINT("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(hcd);
++	dwc_otg_dump_global_registers(hcd->core_if);
++	dwc_otg_dump_host_registers(hcd->core_if);
++	DWC_PRINT("************************************************************\n");
++	DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_hcd.h
+@@ -0,0 +1,647 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: #45 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++struct dwc_otg_device;
++
++#include "otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e	control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t			complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t		ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t			error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	int			isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t			isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t		isoc_split_offset;
++
++	/** URB for this transfer */
++	struct urb		*urb;
++
++	/** This list of QTDs */
++	struct list_head	qtd_list_entry;
++
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- USB_ENDPOINT_XFER_CONTROL
++	 *	- USB_ENDPOINT_XFER_ISOC
++	 *	- USB_ENDPOINT_XFER_BULK
++	 *	- USB_ENDPOINT_XFER_INT
++	 */
++	uint8_t			ep_type;
++	uint8_t			ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t		maxp;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t			data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t			ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct list_head	qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	dwc_hc_t		*channel;
++
++	/** QTD currently assigned to a host channel for this QH. */
++	dwc_otg_qtd_t		*qtd_in_process;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t			do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint8_t			usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t		interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t		sched_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t		start_split_frame;
++
++	/** @} */
++
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	struct list_head	qh_list_entry;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++	/** The DWC otg device pointer */
++	struct dwc_otg_device	*otg_dev;
++
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t	*core_if;
++
++	/** Internal DWC HCD Flags */
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change : 1;
++			unsigned port_connect_status : 1;
++			unsigned port_reset_change : 1;
++			unsigned port_enable_change : 1;
++			unsigned port_suspend_change : 1;
++			unsigned port_over_current_change : 1;
++			unsigned reserved : 27;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	struct list_head	non_periodic_sched_inactive;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	struct list_head	non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	struct list_head	*non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	struct list_head	periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	struct list_head	periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	struct list_head	periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	struct list_head	periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t		periodic_usecs;
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t		frame_number;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct list_head	free_hc_list;
++
++	/**
++	 * Number of host channels assigned to periodic transfers. Currently
++	 * assuming that there is a dedicated host channel for each periodic
++	 * transaction and at least one host channel available for
++	 * non-periodic transactions.
++	 */
++	int			periodic_channels;
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int			non_periodic_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	dwc_hc_t		*hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket.
++	 */
++	uint8_t			*status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t		status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++	/**
++	 * Structure to allow starting the HCD in a non-interrupt context
++	 * during an OTG role change.
++	 */
++	struct delayed_work	start_work;
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++	struct timer_list	conn_timer;
++
++	/* Tasket to do a reset */
++	struct tasklet_struct	*reset_tasklet;
++
++	/*  */
++	spinlock_t lock;
++
++#ifdef DEBUG
++	uint32_t		frrem_samples;
++	uint64_t		frrem_accum;
++
++	uint32_t		hfnum_7_samples_a;
++	uint64_t		hfnum_7_frrem_accum_a;
++	uint32_t		hfnum_0_samples_a;
++	uint64_t		hfnum_0_frrem_accum_a;
++	uint32_t		hfnum_other_samples_a;
++	uint64_t		hfnum_other_frrem_accum_a;
++
++	uint32_t		hfnum_7_samples_b;
++	uint64_t		hfnum_7_frrem_accum_b;
++	uint32_t		hfnum_0_samples_b;
++	uint64_t		hfnum_0_frrem_accum_b;
++	uint32_t		hfnum_other_samples_b;
++	uint64_t		hfnum_other_frrem_accum_b;
++#endif
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int dwc_otg_hcd_init(struct platform_device *pdev);
++extern void dwc_otg_hcd_remove(struct platform_device *pdev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++				//   struct usb_host_endpoint *ep,
++				   struct urb *urb,
++				   gfp_t mem_flags
++				  );
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++				   struct urb *urb, int status);
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++					 struct usb_host_endpoint *ep);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
++				       char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++				   u16 typeReq,
++				   u16 wValue,
++				   u16 wIndex,
++				   char *buf,
++				   u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++					   dwc_otg_transaction_type_e tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
++				     int status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
++extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
++						  dwc_otg_qh_t *qh)
++{
++	dwc_otg_hcd_qh_remove(hcd, qh);
++	dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
++{
++	return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
++{
++	return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param[in] qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
++{
++	kfree(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] hcd HCD instance.
++ * @param[in] qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++	unsigned long flags;
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++	list_del(&qtd->qtd_list_entry);
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++	dwc_otg_hcd_qtd_remove(hcd, qtd);
++	dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
++/** @} */
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++	struct usb_device *dev = urb->dev;
++	int ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (usb_pipein(urb->pipe))
++		return dev->ep_in[ep_num];
++	else
++		return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++				     (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++		(DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++	return (frame1 != frame2) &&
++		(((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++		 (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++	return frame & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_hcd_intr.c
+@@ -0,0 +1,1826 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: #70 $
++ * $Date: 2008/10/16 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include <linux/version.h>
++
++#include "otg_driver.h"
++#include "otg_hcd.h"
++#include "otg_regs.h"
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++	/* Check if HOST Mode */
++	if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			return 0;
++		}
++
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++			DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++		if (gintsts.b.usbreset) {
++			DWC_PRINT("Usb Reset In Host Mode\n");
++		}
++		if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.rxstsqlvl) {
++			retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.nptxfempty) {
++			retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++		}
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
++		}
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++		{
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    dwc_read_reg32(&global_regs->gintmsk));
++		}
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++	if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++		DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++	}
++	S3C2410X_CLEAR_EINTPEND();
++
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++	static uint16_t		frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t		last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int		frame_num_idx = 0;
++	static uint16_t		last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int		dumped_frame_num_array = 0;
++
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
++			frame_num_array[frame_num_idx] = curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		printk(KERN_EMERG USB_DWC "Frame     Last Frame\n");
++		printk(KERN_EMERG USB_DWC "-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			printk(KERN_EMERG USB_DWC "0x%04x    0x%04x\n",
++			       frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
++{
++	hfnum_data_t		hfnum;
++	struct list_head	*qh_entry;
++	dwc_otg_qh_t		*qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0};
++
++	hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++	hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	hcd->frrem_accum += hfnum.b.frrem;
++	hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(hcd->frame_number);
++#endif
++
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = hcd->periodic_sched_inactive.next;
++	while (qh_entry != &hcd->periodic_sched_inactive) {
++		qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++			/*
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
++		}
++	}
++
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(dwc_otg_hcd->core_if,
++					    hc->xfer_buff,
++					    grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++		break;
++	}
++
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (hprt0.b.prtconndet) {
++		DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++			    "Port Connect Detected--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++		dwc_otg_hcd->flags.b.port_connect_status = 1;
++		hprt0_modify.b.prtconndet = 1;
++
++		/* B-Device has connected, Delete the connection timer. */
++		del_timer( &dwc_otg_hcd->conn_timer );
++
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			int do_reset = 0;
++			dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power) {
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
++				    hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
++					/*
++					 * Low power
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++					if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
++					    params->host_ls_low_power_phy_clk ==
++					     DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					} else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++							dwc_write_reg32(&host_if->host_global_regs->hcfg,
++									hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				} else {
++					/*
++					 * Not low power
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					tasklet_schedule(dwc_otg_hcd->reset_tasklet);
++				}
++			}
++
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++		} else {
++			dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status,
++				       int *short_read)
++{
++	hctsiz_data_t	hctsiz;
++	uint32_t	length;
++
++	if (short_read != NULL) {
++		*short_read = 0;
++	}
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (hc->ep_is_in) {
++			length = hc->xfer_len - hctsiz.b.xfersize;
++			if (short_read != NULL) {
++				*short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (hc->qh->do_split) {
++			length = qtd->ssplit_out_xfer_count;
++		} else {
++			length = hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      struct urb *urb,
++				      dwc_otg_qtd_t *qtd)
++{
++	int		xfer_done = 0;
++	int		short_read = 0;
++
++	urb->actual_length += get_actual_xfer_length(hc, hc_regs, qtd,
++						     DWC_OTG_HC_XFER_COMPLETE,
++						     &short_read);
++
++	if (short_read || urb->actual_length == urb->transfer_buffer_length) {
++		xfer_done = 1;
++		if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
++			urb->status = -EREMOTEIO;
++		} else {
++			urb->status = 0;
++		}
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->transfer_buffer_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *hc,
++			     dwc_otg_hc_regs_t *hc_regs,
++			     dwc_otg_qtd_t *qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *hcd,
++			  dwc_otg_qh_t *qh,
++			  int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++	qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++		continue_split = 0;
++	}
++
++	qh->channel = NULL;
++	qh->qtd_in_process = NULL;
++	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *hcd,
++		      dwc_hc_t *hc,
++		      dwc_otg_hc_regs_t *hc_regs,
++		      dwc_otg_qtd_t *qtd,
++		      dwc_otg_halt_status_e halt_status)
++{
++	struct urb *urb = qtd->urb;
++	dwc_otg_halt_status_e ret_val = halt_status;
++	struct usb_iso_packet_descriptor *frame_desc;
++
++	frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++			get_actual_xfer_length(hc, hc_regs, qtd,
++					       halt_status, NULL);
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (hc->ep_is_in) {
++			frame_desc->status = -ENOSR;
++		} else {
++			frame_desc->status = -ECOMM;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -EOVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -EPROTO;
++		frame_desc->actual_length =
++			get_actual_xfer_length(hc, hc_regs, qtd,
++					       halt_status, NULL);
++	default:
++		DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++			  halt_status);
++		BUG();
++		break;
++	}
++
++	if (++qtd->isoc_frame_index == urb->number_of_packets) {
++		/*
++		 * urb->status is not used for isoc transfers.
++		 * The individual frame_desc statuses are used instead.
++		 */
++		dwc_otg_hcd_complete_urb(hcd, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++
++	return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *hcd,
++			    dwc_hc_t *hc,
++			    dwc_otg_qtd_t *qtd,
++			    dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d\n",
++		    __func__, hc->hc_num, halt_status);
++
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV, "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			qtd->urb->status = -EPROTO;
++			dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
++		free_qtd = 0;
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++
++	deactivate_qh(hcd, hc->qh, free_qtd);
++
++ cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(hcd->core_if, hc);
++	list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
++
++	switch (hc->ep_type) {
++	case DWC_OTG_EP_TYPE_CONTROL:
++	case DWC_OTG_EP_TYPE_BULK:
++		hcd->non_periodic_channels--;
++		break;
++
++	default:
++		/*
++		 * Don't release reservations for periodic channels here.
++		 * That's done when a periodic transfer is descheduled (i.e.
++		 * when the QH is removed from the periodic schedule).
++		 */
++		break;
++	}
++
++	/* Try to queue more transfers now that there's a free channel. */
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *hcd,
++			 dwc_hc_t *hc,
++			 dwc_otg_qtd_t *qtd,
++			 dwc_otg_halt_status_e halt_status)
++{
++	if (hcd->core_if->dma_enable) {
++		release_channel(hcd, hc, qtd, halt_status);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++	if (hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0};
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = hcd->core_if->core_global_regs;
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			list_move(&hc->qh->qh_list_entry,
++				  &hcd->periodic_sched_assigned);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	hcint_data_t hcint;
++
++	qtd->error_count = 0;
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		hc->qh->ping_state = 1;
++		clear_hc_int(hc_regs, nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++		halt_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++		release_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
++				   dwc_hc_t *hc,
++				   dwc_otg_hc_regs_t *hc_regs,
++				   dwc_otg_qtd_t *qtd,
++				   dwc_otg_halt_status_e halt_status)
++{
++	hctsiz_data_t hctsiz;
++	qtd->error_count = 0;
++
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++		release_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd)
++{
++	int			urb_xfer_done;
++	dwc_otg_halt_status_e	halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	struct urb		*urb = qtd->urb;
++	int			pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", hc->hc_num);
++
++	/*
++	 * Handle xfer complete on CSPLIT.
++	 */
++	if (hc->qh->do_split) {
++		qtd->complete_split = 0;
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case PIPE_CONTROL:
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->transfer_buffer_length > 0) {
++				qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA: {
++			urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++			if (urb_xfer_done) {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++				DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++			} else {
++				save_data_toggle(hc, hc_regs, qtd);
++			}
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (urb->status == -EINPROGRESS) {
++				urb->status = 0;
++			}
++			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case PIPE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++		if (urb_xfer_done) {
++			dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		save_data_toggle(hc, hc_regs, qtd);
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case PIPE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++		dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++		save_data_toggle(hc, hc_regs, qtd);
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd,
++				       DWC_OTG_HC_XFER_URB_COMPLETE);
++		break;
++	case PIPE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV,  "  Isochronous transfer complete\n");
++		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	}
++
++	disable_hc_int(hc_regs, xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
++				    dwc_hc_t *hc,
++				    dwc_otg_hc_regs_t *hc_regs,
++				    dwc_otg_qtd_t *qtd)
++{
++	struct urb *urb = qtd->urb;
++	int pipe_type = usb_pipetype(urb->pipe);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", hc->hc_num);
++
++	if (pipe_type == PIPE_CONTROL) {
++		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++	}
++
++	if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++		dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++	disable_hc_int(hc_regs, stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       struct urb *urb,
++				       dwc_otg_qtd_t *qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++							    halt_status, NULL);
++	urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t	hctsiz;
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n", hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n", bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n", urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->transfer_buffer_length);
++	}
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
++				  dwc_hc_t *hc,
++				  dwc_otg_hc_regs_t *hc_regs,
++				  dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", hc->hc_num);
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (hc->do_split) {
++		if (hc->complete_split) {
++			qtd->error_count = 0;
++		}
++		qtd->complete_split = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		goto handle_nak_done;
++	}
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		if (hcd->core_if->dma_enable && hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		qtd->error_count = 0;
++
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++						   qtd, DWC_OTG_HC_XFER_NAK);
++			save_data_toggle(hc, hc_regs, qtd);
++			if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case PIPE_INTERRUPT:
++		qtd->error_count = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case PIPE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		BUG();
++		break;
++	}
++
++ handle_nak_done:
++	disable_hc_int(hc_regs, nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
++				  dwc_hc_t *hc,
++				  dwc_otg_hc_regs_t *hc_regs,
++				  dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", hc->hc_num);
++
++	if (hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++			qtd->ssplit_out_xfer_count = hc->xfer_len;
++		}
++		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			switch (hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID:
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				{
++					struct usb_iso_packet_descriptor *frame_desc;
++
++					frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
++					qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
++						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++					} else {
++						qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++					}
++
++				}
++				break;
++			}
++		} else {
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	} else {
++		qtd->error_count = 0;
++
++		if (hc->qh->ping_state) {
++			hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(hc_regs, ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
++				   dwc_hc_t *hc,
++				   dwc_otg_hc_regs_t *hc_regs,
++				   dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if (hc->do_split && hc->complete_split) {
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				qtd->error_count++;
++#endif
++				qtd->complete_split = 0;
++				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++		goto handle_nyet_done;
++	}
++
++	hc->qh->ping_state = 1;
++	qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	save_data_toggle(hc, hc_regs, qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++	disable_hc_int(hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", hc->hc_num);
++	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++	disable_hc_int(hc_regs, bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	hcchar_data_t	hcchar;
++	hcsplt_data_t	hcsplt;
++	hctsiz_data_t	hctsiz;
++	uint32_t	hcdma;
++	struct urb	*urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", hc->hc_num);
++
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++	hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++	hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++		  DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_ERROR("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		  (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_ERROR("  Endpoint type: %s\n",
++		  ({char *pipetype;
++		    switch (usb_pipetype(urb->pipe)) {
++		    case PIPE_CONTROL: pipetype = "CONTROL"; break;
++		    case PIPE_BULK: pipetype = "BULK"; break;
++		    case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++		    case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++		    default: pipetype = "UNKNOWN"; break;
++		   }; pipetype;}));
++	DWC_ERROR("  Speed: %s\n",
++		  ({char *speed;
++		    switch (urb->dev->speed) {
++		    case USB_SPEED_HIGH: speed = "HIGH"; break;
++		    case USB_SPEED_FULL: speed = "FULL"; break;
++		    case USB_SPEED_LOW: speed = "LOW"; break;
++		    default: speed = "UNKNOWN"; break;
++		   }; speed;}));
++	DWC_ERROR("  Max packet size: %d\n",
++		  usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_ERROR("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++	disable_hc_int(hc_regs, ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
++				      dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", hc->hc_num);
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		qtd->error_count++;
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++						   qtd, DWC_OTG_HC_XFER_XACT_ERR);
++			save_data_toggle(hc, hc_regs, qtd);
++			if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case PIPE_INTERRUPT:
++		qtd->error_count++;
++		if (hc->do_split && hc->complete_split) {
++			qtd->complete_split = 0;
++		}
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_XACT_ERR);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
++				       dwc_hc_t *hc,
++				       dwc_otg_hc_regs_t *hc_regs,
++				       dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", hc->hc_num);
++
++	switch (usb_pipetype(qtd->urb->pipe)) {
++	case PIPE_CONTROL:
++	case PIPE_BULK:
++		break;
++	case PIPE_INTERRUPT:
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++		break;
++	case PIPE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++							    DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
++					 dwc_hc_t *hc,
++					 dwc_otg_hc_regs_t *hc_regs,
++					 dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Data Toggle Error--\n", hc->hc_num);
++
++	if (hc->ep_is_in) {
++		qtd->error_count = 0;
++	} else {
++		DWC_ERROR("Data Toggle Error on OUT transfer,"
++			  "channel %d\n", hc->hc_num);
++	}
++
++	disable_hc_int(hc_regs, datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
++				 dwc_hc_t *hc,
++				 dwc_otg_hc_regs_t *hc_regs,
++				 dwc_otg_qtd_t *qtd)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++		hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++		hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++		hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++		hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++		DWC_WARN("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++			 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++			 "hcint 0x%08x, hcintmsk 0x%08x, "
++			 "hcsplt 0x%08x, qtd->complete_split %d\n",
++			 __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
++			 hcint.d32, hcintmsk.d32,
++			 hcsplt.d32, qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(hc_regs, chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(hc_regs, chhltd);
++		hc->halt_pending = 0;
++		halt_channel(hcd, hc, qtd, hc->halt_status);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
++				      dwc_hc_t *hc,
++				      dwc_otg_hc_regs_t *hc_regs,
++				      dwc_otg_qtd_t *qtd)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	int out_nak_enh = 0;
++
++	/* For core with OUT NAK enhancement, the flow for high-
++	 * speed CONTROL/BULK OUT is handled a little differently.
++	 */
++	if (hcd->core_if->snpsid >= 0x4F54271A) {
++		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++			DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement enabled\n");
++			out_nak_enh = 1;
++		} else {
++			DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
++		}
++	} else {
++		DWC_DEBUGPL(DBG_HCD, "OUT NAK enhancement disabled, no core support\n");
++	}
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		release_channel(hcd, hc, qtd, hc->halt_status);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		}
++		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xacterr) {
++		if (out_nak_enh) {
++			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++				printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
++				qtd->error_count = 0;
++			} else {
++				printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
++			}
++		}
++
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (!out_nak_enh) {
++		if (hcint.b.nyet) {
++			/*
++			 * Must handle nyet before nak or ack. Could get a nyet at the
++			 * same time as either of those on a BULK/CONTROL OUT that
++			 * started with a PING. The nyet takes precedence.
++			 */
++			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.bblerr) {
++			handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.frmovrun) {
++			handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.nak && !hcintmsk.b.nak) {
++			/*
++			 * If nak is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the nak is handled by
++			 * the nak interrupt handler, not here. Handle nak here for
++			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++			 * rewinding the buffer pointer.
++			 */
++			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.ack && !hcintmsk.b.ack) {
++			/*
++			 * If ack is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the ack is handled by
++			 * the ack interrupt handler, not here. Handle ack here for
++			 * split transfers. Start splits halt on ACK.
++			 */
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		} else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				/*
++				 * A periodic transfer halted with no other channel
++				 * interrupts set. Assume it was halted by the core
++				 * because it could not be completed in its scheduled
++				 * (micro)frame.
++				 */
++#ifdef DEBUG
++				DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++					  __func__, hc->hc_num);
++#endif
++				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++			} else {
++				DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++					  "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++					  __func__, hc->hc_num, hcint.d32,
++					  dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
++			}
++		}
++	} else {
++		printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
++				     dwc_hc_t *hc,
++				     dwc_otg_hc_regs_t *hc_regs,
++				     dwc_otg_qtd_t *qtd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++			return 1;
++		}
++#endif
++		release_channel(hcd, hc, qtd, hc->halt_status);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
++{
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++	hc = dwc_otg_hcd->hc_ptr_array[num];
++	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++	qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++	hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++	hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV, "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!dwc_otg_hcd->core_if->dma_enable) {
++		if (hcint.b.chhltd && hcint.d32 != 0x2) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ack) {
++		retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.frmovrun) {
++		retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.datatglerr) {
++		retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_hcd_queue.c
+@@ -0,0 +1,713 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: #33 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/version.h>
++
++#include <mach/irqs.h>
++
++#include "otg_driver.h"
++#include "otg_hcd.h"
++#include "otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc ();
++	if (qh == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qh_init (hcd, qh, urb);
++	return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] hcd HCD instance.
++ * @param[in] qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	dwc_otg_qtd_t *qtd;
++	struct list_head *pos;
++	//unsigned long flags;
++
++	/* Free each QTD in the QTD list */
++
++#ifdef CONFIG_SMP
++	//the spinlock is locked before this function get called,
++	//but in case the lock is needed, the check function is preserved
++
++	//but in non-SMP mode, all spinlock is lockable.
++	//don't do the test in non-SMP mode
++
++	if(spin_trylock(&hcd->lock)) {
++		printk("%s: It is not supposed to be lockable!!\n",__func__);
++		BUG();
++	}
++#endif
++//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++	for (pos = qh->qtd_list.next;
++	     pos != &qh->qtd_list;
++	     pos = qh->qtd_list.next)
++	{
++		list_del (pos);
++		qtd = dwc_list_to_qtd (pos);
++		dwc_otg_hcd_qtd_free (qtd);
++	}
++//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++	kfree (qh);
++	return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] qh The QH to init.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
++{
++	char *speed, *type;
++	memset (qh, 0, sizeof (dwc_otg_qh_t));
++
++	/* Initialize QH */
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_BULK:
++		qh->ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_ISOCHRONOUS:
++		qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_INTERRUPT:
++		qh->ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	}
++
++	qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
++	INIT_LIST_HEAD(&qh->qtd_list);
++	INIT_LIST_HEAD(&qh->qh_list_entry);
++	qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub
++	 * NOT virtual root hub */
++	qh->do_split = 0;
++	if (((urb->dev->speed == USB_SPEED_LOW) ||
++	     (urb->dev->speed == USB_SPEED_FULL)) &&
++	    (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
++	{
++		DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++			   usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
++			   urb->dev->ttport);
++		qh->do_split = 1;
++	}
++
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
++	    qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++		qh->usecs = usb_calc_bus_time(urb->dev->speed,
++					       usb_pipein(urb->pipe),
++					       (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
++					       bytecount);
++
++		/* Start in a slightly future (micro)frame. */
++		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++						     SCHEDULE_SLOP);
++		qh->interval = urb->interval;
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++			qh->interval = 8;
++		}
++#endif
++		hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++		    ((urb->dev->speed == USB_SPEED_LOW) ||
++		     (urb->dev->speed == USB_SPEED_FULL))) {
++			qh->interval *= 8;
++			qh->sched_frame |= 0x7;
++			qh->start_split_frame = qh->sched_frame;
++		}
++
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    urb->dev->devnum);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    usb_pipeendpoint(urb->pipe),
++		    usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++
++	switch(urb->dev->speed) {
++	case USB_SPEED_LOW:
++		speed = "low";
++		break;
++	case USB_SPEED_FULL:
++		speed = "full";
++		break;
++	case USB_SPEED_HIGH:
++		speed = "high";
++		break;
++	default:
++		speed = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
++
++	switch (qh->ep_type) {
++	case USB_ENDPOINT_XFER_ISOC:
++		type = "isochronous";
++		break;
++	case USB_ENDPOINT_XFER_INT:
++		type = "interrupt";
++		break;
++	case USB_ENDPOINT_XFER_CONTROL:
++		type = "control";
++		break;
++	case USB_ENDPOINT_XFER_BULK:
++		type = "bulk";
++		break;
++	default:
++		type = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n",type);
++
++#ifdef DEBUG
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    qh->interval);
++	}
++#endif
++
++	return;
++}
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t *hcd)
++{
++	/*
++	 * Currently assuming that there is a dedicated host channnel for each
++	 * periodic transaction plus at least one host channel for
++	 * non-periodic transactions.
++	 */
++	int status;
++	int num_channels;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
++	    (hcd->periodic_channels < num_channels - 1)) {
++		status = 0;
++	}
++	else {
++		DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++			   __func__, num_channels, hcd->periodic_channels,
++			   hcd->non_periodic_channels);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int 		status;
++	uint16_t 	max_claimed_usecs;
++
++	status = 0;
++
++	if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
++		/*
++		 * High speed mode.
++		 * Max periodic usecs is 80% x 125 usec = 100 usec.
++		 */
++		max_claimed_usecs = 100 - qh->usecs;
++	} else {
++		/*
++		 * Full speed mode.
++		 * Max periodic usecs is 90% x 1000 usec = 900 usec.
++		 */
++		max_claimed_usecs = 900 - qh->usecs;
++	}
++
++	if (hcd->periodic_usecs > max_claimed_usecs) {
++		DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
++			   __func__, hcd->periodic_usecs, qh->usecs);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int		status;
++	uint32_t 	max_xfer_size;
++	uint32_t	max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_NOTICE("%s: Periodic xfer length %d > "
++			    "max xfer length for channel %d\n",
++			    __func__, max_xfer_size, max_channel_xfer_size);
++		status = -ENOSPC;
++	}
++
++	return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	int status = 0;
++
++	status = periodic_channel_available(hcd);
++	if (status) {
++		DWC_NOTICE("%s: No host channel available for periodic "
++			   "transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_periodic_bandwidth(hcd, qh);
++	if (status) {
++		DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++			   "periodic transfer.\n", __func__);
++		return status;
++	}
++
++	status = check_max_xfer_size(hcd, qh);
++	if (status) {
++		DWC_NOTICE("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	/* Always start in the inactive schedule. */
++	list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
++
++	/* Reserve the periodic channel. */
++	hcd->periodic_channels++;
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs += qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
++		DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	}
++
++	return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	//unsigned long flags;
++	int status = 0;
++
++#ifdef CONFIG_SMP
++	//the spinlock is locked before this function get called,
++	//but in case the lock is needed, the check function is preserved
++	//but in non-SMP mode, all spinlock is lockable.
++	//don't do the test in non-SMP mode
++
++	if(spin_trylock(&hcd->lock)) {
++		printk("%s: It is not supposed to be lockable!!\n",__func__);
++		BUG();
++	}
++#endif
++//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++
++	if (!list_empty(&qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		goto done;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(qh)) {
++		/* Always start in the inactive schedule. */
++		list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
++	} else {
++		status = schedule_periodic(hcd, qh);
++	}
++
++ done:
++//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++	return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	list_del_init(&qh->qh_list_entry);
++
++	/* Release the periodic channel reservation. */
++	hcd->periodic_channels--;
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs -= qh->usecs;
++
++	/* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++	hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
++
++	if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	} else {
++		hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
++		DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++			    qh, qh->usecs, qh->interval);
++	}
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param[in] hcd The HCD state structure.
++ * @param[in] qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++	//unsigned long flags;
++
++#ifdef CONFIG_SMP
++	//the spinlock is locked before this function get called,
++	//but in case the lock is needed, the check function is preserved
++	//but in non-SMP mode, all spinlock is lockable.
++	//don't do the test in non-SMP mode
++
++	if(spin_trylock(&hcd->lock)) {
++		printk("%s: It is not supposed to be lockable!!\n",__func__);
++		BUG();
++	}
++#endif
++//	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++	if (list_empty(&qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		goto done;
++	}
++
++	if (dwc_qh_is_non_per(qh)) {
++		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++			hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		}
++		list_del_init(&qh->qh_list_entry);
++	} else {
++		deschedule_periodic(hcd, qh);
++	}
++
++ done:
++//	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++	return;
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
++{
++	unsigned long flags;
++	SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++	if (dwc_qh_is_non_per(qh)) {
++		dwc_otg_hcd_qh_remove(hcd, qh);
++		if (!list_empty(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++	} else {
++		uint16_t frame_number =	dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++		if (qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				qh->sched_frame = frame_number;
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc(qh->start_split_frame, 1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
++						qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
++					}
++				}
++			} else {
++				qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
++								     qh->interval);
++				if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++					qh->sched_frame = frame_number;
++				}
++				qh->sched_frame |= 0x7;
++				qh->start_split_frame = qh->sched_frame;
++			}
++		} else {
++			qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
++			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++				qh->sched_frame = frame_number;
++			}
++		}
++
++		if (list_empty(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if (qh->sched_frame == frame_number) {
++				list_move(&qh->qh_list_entry,
++					  &hcd->periodic_sched_ready);
++			} else {
++				list_move(&qh->qh_list_entry,
++					  &hcd->periodic_sched_inactive);
++			}
++		}
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param[in] urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc ();
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init (qtd, urb);
++	return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param[in] qtd The QTD to initialize.
++ * @param[in] urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
++{
++	memset (qtd, 0, sizeof (dwc_otg_qtd_t));
++	qtd->urb = urb;
++	if (usb_pipecontrol(urb->pipe)) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	qtd->complete_split = 0;
++	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	qtd->isoc_split_offset = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	urb->hcpriv = qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
++			 dwc_otg_hcd_t *dwc_otg_hcd)
++{
++	struct usb_host_endpoint *ep;
++	dwc_otg_qh_t *qh;
++	unsigned long flags;
++	int retval = 0;
++
++	struct urb *urb = qtd->urb;
++
++	SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	ep = dwc_urb_to_endpoint(urb);
++	qh = (dwc_otg_qh_t *)ep->hcpriv;
++	if (qh == NULL) {
++		qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
++		if (qh == NULL) {
++			goto done;
++		}
++		ep->hcpriv = qh;
++	}
++
++	retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
++	if (retval == 0) {
++		list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
++	}
++
++ done:
++	SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_pcd.c
+@@ -0,0 +1,2502 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: #70 $
++ * $Date: 2008/10/14 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include <mach/irqs.h>
++#include <linux/usb/ch9.h>
++
++//#include <linux/usb_gadget.h>
++
++#include "otg_driver.h"
++#include "otg_pcd.h"
++
++
++
++/**
++ * Static PCD pointer for use in usb_gadget_register_driver and
++ * usb_gadget_unregister_driver.  Initialized in dwc_otg_pcd_init.
++ */
++static	 dwc_otg_pcd_t *s_pcd = 0;
++
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 *buf, unsigned int length);
++
++
++/**
++ * This function completes a request.  It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
++				  int status)
++{
++	unsigned stopped = ep->stopped;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
++	list_del_init(&req->queue);
++
++	if (req->req.status == -EINPROGRESS) {
++		req->req.status = status;
++	} else {
++		status = req->req.status;
++	}
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	SPIN_UNLOCK(&ep->pcd->lock);
++	req->req.complete(&ep->ep, &req->req);
++	SPIN_LOCK(&ep->pcd->lock);
++
++	if (ep->pcd->request_pending > 0) {
++		--ep->pcd->request_pending;
++	}
++
++	ep->stopped = stopped;
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_pcd_request_t *req;
++
++	ep->stopped = 1;
++
++	/* called with irqs blocked?? */
++	while (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++				 queue);
++		dwc_otg_request_done(ep, req, -ESHUTDOWN);
++	}
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t	*core_if)
++{
++	uint32_t PerTxMsk = 1;
++	int i;
++	for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
++	{
++		if((PerTxMsk & core_if->p_tx_msk) == 0) {
++			core_if->p_tx_msk |= PerTxMsk;
++			return i + 1;
++		}
++		PerTxMsk <<= 1;
++	}
++	return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
++{
++	core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
++{
++	uint32_t TxMsk = 1;
++	int i;
++
++	for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
++	{
++		if((TxMsk & core_if->tx_msk) == 0) {
++			core_if->tx_msk |= TxMsk;
++			return i + 1;
++		}
++		TxMsk <<= 1;
++	}
++	return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t	*core_if, uint32_t fifo_num)
++{
++	core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
++				 const struct usb_endpoint_descriptor *ep_desc)
++{
++	dwc_otg_pcd_ep_t *ep = 0;
++	dwc_otg_pcd_t *pcd = 0;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !ep_desc || ep->desc ||
++			ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++		DWC_WARN("%s, bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (ep == &ep->pcd->ep0) {
++		DWC_WARN("%s, bad ep(0)\n", __func__);
++		return -EINVAL;
++	}
++
++	/* Check FIFO size? */
++	if (!ep_desc->wMaxPacketSize) {
++		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++		return -ERANGE;
++	}
++
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	ep->desc = ep_desc;
++	ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
++
++	/*
++	 * Activate the EP
++	 */
++	ep->stopped = 0;
++
++	ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
++	ep->dwc_ep.maxpacket = ep->ep.maxpacket;
++
++	ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
++
++	if(ep->dwc_ep.is_in) {
++		if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
++				/*
++				 * if ISOC EP then assign a Periodic Tx FIFO.
++				 */
++				ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
++			 }
++		} else {
++			/*
++			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++			 */
++			ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
++
++		}
++	}
++	/* Set initial data PID. */
++	if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
++		ep->dwc_ep.data_pid_start = 0;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
++					ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
++					ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++
++	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
++		ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++	}
++
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !ep->desc) {
++		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++			usb_ep ? ep->ep.name : NULL);
++		return -EINVAL;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++	dwc_otg_request_nuke(ep);
++
++	dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	ep->desc = 0;
++	ep->stopped = 1;
++
++	if(ep->dwc_ep.is_in) {
++		dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++		release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++		release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++	}
++
++	/* Free DMA Descriptors */
++	pcd = ep->pcd;
++
++	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++
++	if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
++	return 0;
++}
++
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++						     gfp_t gfp_flags)
++{
++	dwc_otg_pcd_request_t *req;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
++	if (0 == ep) {
++		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++		return 0;
++	}
++	req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
++	if (0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++				 "request allocation failed!\n");
++		return 0;
++	}
++	memset(req, 0, sizeof(dwc_otg_pcd_request_t));
++	req->req.dma = DMA_ADDR_INVALID;
++	INIT_LIST_HEAD(&req->queue);
++	return &req->req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep,
++					 struct usb_request *req)
++{
++	dwc_otg_pcd_request_t *request;
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
++
++	if (0 == ep || 0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++				 "Invalid ep or req argument!\n");
++		return;
++	}
++
++	request = container_of(req, dwc_otg_pcd_request_t, req);
++	kfree(request);
++}
++
++#if 0
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++				      dma_addr_t *dma,
++				      gfp_t gfp_flags)
++{
++	void *buf;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	pcd = ep->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++				dma, gfp_flags);
++
++	/* Check dword alignment */
++	if ((bytes & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer size is not a multiple of"
++				 "DWORD size (%d)",__func__, bytes);
++	}
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
++	}
++	else {
++		buf = kmalloc(bytes, gfp_flags);
++	}
++
++	/* Check dword alignment */
++	if (((int)buf & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++					__func__, buf);
++	}
++
++	return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++					dma_addr_t dma, unsigned bytes)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t *pcd = 0;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	pcd = ep->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		dma_free_coherent (NULL, bytes, buf, dma);
++	}
++	else {
++		kfree(buf);
++	}
++}
++#endif
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ *	- When the request completes the request's completion callback
++ *	  is called to return the request to the driver.
++ *	- An EP, except control EPs, may have multiple requests
++ *	  pending.
++ *	- Once submitted the request cannot be examined or modified.
++ *	- Each request is turned into one or more packets.
++ *	- A BULK EP can queue any amount of data; the transfer is
++ *	  packetized.
++ *	- Zero length Packets are specified with the request 'zero'
++ *	  flag.
++ */
++static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
++				struct usb_request *usb_req,
++				gfp_t gfp_flags)
++{
++	int prevented = 0;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	unsigned long flags = 0;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
++			__func__, usb_ep, usb_req, gfp_flags);
++
++	req = container_of(usb_req, dwc_otg_pcd_request_t, req);
++	if (!usb_req || !usb_req->complete || !usb_req->buf ||
++			!list_empty(&req->queue)) {
++		DWC_WARN("%s, bad params\n", __func__);
++		return -EINVAL;
++	}
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++
++	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++			   usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++	if (!GET_CORE_IF(pcd)->core_params->opt) {
++		if (ep->dwc_ep.num != 0) {
++			DWC_ERROR("%s queue req %p, len %d buf %p\n",
++					  usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++		}
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++#if defined(DEBUG) & defined(VERBOSE)
++	dump_msg(usb_req->buf, usb_req->length);
++#endif
++
++	usb_req->status = -EINPROGRESS;
++	usb_req->actual = 0;
++
++	/*
++	 * For EP0 IN without premature status, zlp is required?
++	 */
++	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++		DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
++		//_req->zero = 1;
++	}
++
++	/* Start the transfer */
++	if (list_empty(&ep->queue) && !ep->stopped) {
++		/* EP0 Transfer? */
++		if (ep->dwc_ep.num == 0) {
++			switch (pcd->ep0state) {
++			case EP0_IN_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_IN_DATA_PHASE\n",
++						__func__);
++				break;
++
++			case EP0_OUT_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_OUT_DATA_PHASE\n",
++						__func__);
++				if (pcd->request_config) {
++					/* Complete STATUS PHASE */
++					ep->dwc_ep.is_in = 1;
++					pcd->ep0state = EP0_IN_STATUS_PHASE;
++				}
++				break;
++
++			case EP0_IN_STATUS_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++						"%s ep0: EP0_IN_STATUS_PHASE\n",
++						__func__);
++				break;
++
++			default:
++				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++						pcd->ep0state);
++				SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++				return -EL2HLT;
++			}
++			ep->dwc_ep.dma_addr = usb_req->dma;
++			ep->dwc_ep.start_xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_len = usb_req->length;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			if(usb_req->zero) {
++				if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
++						&& (ep->dwc_ep.xfer_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			ep_check_and_patch_dma_addr(ep);
++			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++		else {
++
++			uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++			/* Setup and start the Transfer */
++			ep->dwc_ep.dma_addr = usb_req->dma;
++			ep->dwc_ep.start_xfer_buff = usb_req->buf;
++			ep->dwc_ep.xfer_buff = usb_req->buf;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = usb_req->length;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++
++			if(max_transfer > MAX_TRANSFER_SIZE) {
++				ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++			} else {
++				ep->dwc_ep.maxxfer = max_transfer;
++			}
++
++			if(usb_req->zero) {
++				if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++						&& (ep->dwc_ep.total_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			ep_check_and_patch_dma_addr(ep);
++			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	}
++
++	if ((req != 0) || prevented) {
++		++pcd->request_pending;
++		list_add_tail(&req->queue, &ep->queue);
++		if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
++			/** @todo NGS Create a function for this. */
++			diepmsk_data_t diepmsk = { .d32 = 0};
++			diepmsk.b.intktxfemp = 1;
++			if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
++				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
++							0, diepmsk.d32);
++			} else {
++				dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++			}
++		}
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++	return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
++				  struct usb_request *usb_req)
++{
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	unsigned long flags;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++	if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("%s, bad argument\n", __func__);
++		return -EINVAL;
++	}
++	pcd = ep->pcd;
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++	DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
++					ep->dwc_ep.is_in ? "IN" : "OUT",
++					usb_req);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry(req, &ep->queue, queue)
++	{
++		if (&req->req == usb_req) {
++			break;
++		}
++	}
++
++	if (&req->req != usb_req) {
++		SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++		return -EINVAL;
++	}
++
++	if (!list_empty(&req->queue)) {
++		dwc_otg_request_done(ep, req, -ECONNRESET);
++	}
++	else {
++		req = 0;
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	return req ? 0 : -EOPNOTSUPP;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ *	- 0 means clear_halt.
++ *	- 1 means set_halt,
++ *	- 2 means clear stall lock flag.
++ *	- 3 means set  stall lock flag.
++ */
++static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
++{
++	int retval = 0;
++	unsigned long flags;
++	dwc_otg_pcd_ep_t *ep = 0;
++
++
++	DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
++			ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++	if (!list_empty(&ep->queue)) {
++		DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
++		retval = -EAGAIN;
++	}
++	else if (value == 0) {
++		dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
++					&ep->dwc_ep);
++	}
++	else if(value == 1) {
++		if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
++			txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++			if(txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
++				retval = -EAGAIN;
++			}
++			else {
++				if (ep->dwc_ep.num == 0) {
++					ep->pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++							&ep->dwc_ep);
++			}
++		}
++		else {
++			if (ep->dwc_ep.num == 0) {
++				ep->pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++						&ep->dwc_ep);
++		}
++	}
++	else if (value == 2) {
++		ep->dwc_ep.stall_clear_flag = 0;
++	}
++	else if (value == 3) {
++		ep->dwc_ep.stall_clear_flag = 1;
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++	return retval;
++}
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
++{
++
++	return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
++}
++
++LIST_HEAD(tofree_list);
++DEFINE_SPINLOCK(tofree_list_lock);
++
++struct free_param {
++	struct list_head list;
++
++	void* addr;
++	dma_addr_t dma_addr;
++	uint32_t size;
++};
++void free_list_agent_fn(void *data){
++	struct list_head free_list;
++	struct free_param *cur,*next;
++
++	spin_lock(&tofree_list_lock);
++	list_add(&free_list,&tofree_list);
++	list_del_init(&tofree_list);
++	spin_unlock(&tofree_list_lock);
++
++	list_for_each_entry_safe(cur,next,&free_list,list){
++		if(cur==&free_list) break;
++		dma_free_coherent(NULL,cur->size,cur->addr,cur->dma_addr);
++		list_del(&cur->list);
++		kfree(cur);
++	}
++}
++DECLARE_WORK(free_list_agent,free_list_agent_fn);
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
++{
++	if(irqs_disabled()){
++		struct free_param* fp=kmalloc(sizeof(struct free_param),GFP_KERNEL);
++		fp->addr=desc_addr;
++		fp->dma_addr=dma_desc_addr;
++		fp->size=count*sizeof(dwc_otg_dma_desc_t);
++
++		spin_lock(&tofree_list_lock);
++		list_add(&fp->list,&tofree_list);
++		spin_unlock(&tofree_list_lock);
++
++		schedule_work(&free_list_agent);
++		return ;
++	}
++	dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++
++ 	dsts_data_t 		dsts = { .d32 = 0};
++	depctl_data_t 		depctl = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++ 	int 			i, j;
++
++	if(dwc_ep->is_in)
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++	else
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++
++
++	/** Allocate descriptors for double buffering */
++	dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
++	if(dwc_ep->desc_addr) {
++		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++		return;
++	}
++
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		desc_sts_data_t sts = { .d32 =0 };
++		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		uint32_t data_per_desc;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[dwc_ep->num];
++		int	offset;
++
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++		dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
++
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		offset = 0;
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				offset += data_per_desc;
++				dma_desc ++;
++				//(uint32_t)dma_ad += data_per_desc;
++				dma_ad = (uint32_t)dma_ad + data_per_desc;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			offset += data_per_desc;
++			dma_desc ++;
++			//(uint32_t)dma_ad += data_per_desc;
++			dma_ad = (uint32_t)dma_ad + data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++		dma_desc ++;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_out.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		offset = 0;
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				offset += data_per_desc;
++				dma_desc ++;
++				//(uint32_t)dma_ad += data_per_desc;
++				dma_ad = (uint32_t)dma_ad + data_per_desc;
++			}
++		}
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			offset += data_per_desc;
++			dma_desc ++;
++			//(uint32_t)dma_ad += data_per_desc;
++			dma_ad = (uint32_t)dma_ad + data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = 1;
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = 0;
++
++		/** Write dma_ad into DOEPDMA register */
++		dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++
++	}
++	/** ISO IN EP */
++	else {
++		desc_sts_data_t sts = { .d32 =0 };
++		dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++			core_if->dev_if->in_ep_regs[dwc_ep->num];
++		unsigned int		   frmnumber;
++		fifosize_data_t		txfifosize,rxfifosize;
++
++		txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
++		rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
++
++
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++		dma_ad = dwc_ep->dma_addr0;
++
++		dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++
++		frmnumber = dwc_ep->next_frame;
++
++		sts.b_iso_in.framenum = frmnumber;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		/** Buffer 0 descriptors setup */
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++			dma_desc ++;
++
++			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++		++dma_desc;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_in.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++			dma_desc ++;
++
++			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++			sts.b_iso_in.ioc = 0;
++		}
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = 1;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++		/** Write dma_ad into diepdma register */
++		dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++	}
++	/** Enable endpoint, clear nak  */
++	depctl.d32 = 0;
++	depctl.b.epena = 1;
++	depctl.b.usbactep = 1;
++	depctl.b.cnak = 1;
++
++	dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++	depctl.d32 = dwc_read_reg32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t 		depctl = { .d32 = 0 };
++	volatile uint32_t 	*addr;
++
++
++	if(ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++
++	if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
++		return;
++	} else {
++		deptsiz_data_t		deptsiz = { .d32 = 0 };
++
++		ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++		ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
++				ep->maxpacket;
++		ep->xfer_count = 0;
++		ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++		if(ep->is_in) {
++			/* Program the transfer size and packet count
++			 *	as follows: xfersize = N * maxpacket +
++			 *	short_packet pktcnt = N + (short_packet
++			 *	exist ? 1 : 0)
++			 */
++			deptsiz.b.mc = ep->pkt_per_frm;
++			deptsiz.b.xfersize = ep->xfer_len;
++			deptsiz.b.pktcnt =
++				(ep->xfer_len - 1 + ep->maxpacket) /
++				ep->maxpacket;
++			dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++
++		} else {
++			deptsiz.b.pktcnt =
++					(ep->xfer_len + (ep->maxpacket - 1)) /
++					ep->maxpacket;
++			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++			dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
++
++		}
++		/** Enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++	}
++}
++
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ 	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable) {
++			if(ep->is_in) {
++				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++			} else {
++				ep->desc_cnt = ep->pkt_cnt;
++			}
++			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++		} else {
++			if(core_if->pti_enh_enable) {
++				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++			} else {
++				ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++				ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++			}
++		}
++	} else {
++		ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer.	 For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	depctl_data_t depctl = { .d32 = 0 };
++	volatile uint32_t *addr;
++
++	if(ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	}
++	else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	/* disable the ep */
++	depctl.d32 = dwc_read_reg32(addr);
++
++	depctl.b.epdis = 1;
++	depctl.b.snak = 1;
++
++	dwc_write_reg32(addr, depctl.d32);
++
++	if(core_if->dma_desc_enable &&
++		ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
++	}
++
++	/* reset varibales */
++	ep->dma_addr0 = 0;
++	ep->dma_addr1 = 0;
++	ep->xfer_buff0 = 0;
++	ep->xfer_buff1 = 0;
++	ep->data_per_frame = 0;
++	ep->data_pattern_frame = 0;
++	ep->sync_frame = 0;
++	ep->buf_proc_intrvl = 0;
++	ep->bInterval = 0;
++	ep->proc_buf_num = 0;
++	ep->pkt_per_frm = 0;
++	ep->pkt_per_frm = 0;
++	ep->desc_cnt = 	0;
++	ep->iso_desc_addr = 0;
++	ep->iso_dma_desc_addr = 0;
++}
++
++
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ *	- Every time a sync period completes the request's completion callback
++ *	  is called to provide data to the gadget driver.
++ *	- Once submitted the request cannot be modified.
++ *	- Each request is turned into periodic data packets untill ISO
++ *	  Transfer is stopped..
++ */
++static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++				gfp_t gfp_flags)
++{
++	dwc_otg_pcd_ep_t 	*ep;
++	dwc_otg_pcd_t		*pcd;
++	dwc_ep_t 		*dwc_ep;
++	unsigned long 		flags = 0;
++	int32_t 		frm_data;
++	dwc_otg_core_if_t	*core_if;
++	dcfg_data_t		dcfg;
++	dsts_data_t		dsts;
++
++
++	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++		DWC_WARN("%s, bad params\n", __func__);
++		return -EINVAL;
++	}
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++	core_if = GET_CORE_IF(pcd);
++
++	dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++	dwc_ep = &ep->dwc_ep;
++
++	if(ep->iso_req) {
++		DWC_WARN("%s, iso request in progress\n", __func__);
++	}
++	req->status = -EINPROGRESS;
++
++	dwc_ep->dma_addr0 = req->dma0;
++	dwc_ep->dma_addr1 = req->dma1;
++
++	dwc_ep->xfer_buff0 = req->buf0;
++	dwc_ep->xfer_buff1 = req->buf1;
++
++	ep->iso_req = req;
++
++	dwc_ep->data_per_frame = req->data_per_frame;
++
++	/** @todo - pattern data support is to be implemented in the future */
++	dwc_ep->data_pattern_frame = req->data_pattern_frame;
++	dwc_ep->sync_frame = req->sync_frame;
++
++	dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
++
++	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++	dwc_ep->proc_buf_num = 0;
++
++	dwc_ep->pkt_per_frm = 0;
++	frm_data = ep->dwc_ep.data_per_frame;
++	while(frm_data > 0) {
++		dwc_ep->pkt_per_frm++;
++		frm_data -= ep->dwc_ep.maxpacket;
++	}
++
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	if(req->flags & USB_REQ_ISO_ASAP) {
++		dwc_ep->next_frame = dsts.b.soffn + 1;
++		if(dwc_ep->bInterval != 1){
++			dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
++		}
++	} else {
++		dwc_ep->next_frame = req->start_frame;
++	}
++
++
++	if(!core_if->pti_enh_enable) {
++		dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++	} else {
++		dwc_ep->pkt_cnt =
++			(dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++			- 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++	}
++
++	if(core_if->dma_desc_enable) {
++		dwc_ep->desc_cnt =
++			dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++	}
++
++	dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
++	if(!dwc_ep->pkt_info) {
++		return -ENOMEM;
++	}
++	if(core_if->pti_enh_enable) {
++		memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++
++	dwc_ep->cur_pkt = 0;
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++
++	return 0;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_t	*pcd;
++	dwc_ep_t *dwc_ep;
++	unsigned long flags;
++
++	ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++	if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -EINVAL;
++	}
++
++	pcd = ep->pcd;
++
++	if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	dwc_ep = &ep->dwc_ep;
++
++	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++	kfree(dwc_ep->pkt_info);
++
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	if(ep->iso_req != req) {
++		return -EINVAL;
++	}
++
++	req->status = -ECONNRESET;
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++
++	ep->iso_req = 0;
++
++	return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ *	- Every time a sync period completes this function is called to
++ *	  perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
++{
++ 	int i;
++	struct usb_gadget_iso_packet_descriptor *iso_packet;
++	dwc_ep_t *dwc_ep;
++
++	dwc_ep = &ep->dwc_ep;
++
++	if(ep->iso_req->status == -ECONNRESET) {
++		DWC_PRINT("Device has already disconnected\n");
++		/*Device has been disconnected*/
++		return;
++	}
++
++	if(dwc_ep->proc_buf_num != 0) {
++		iso_packet = ep->iso_req->iso_packet_desc0;
++	}
++
++	else {
++		iso_packet = ep->iso_req->iso_packet_desc1;
++	}
++
++	/* Fill in ISOC packets descriptors & pass to gadget driver*/
++
++	for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
++		iso_packet[i].status = dwc_ep->pkt_info[i].status;
++		iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
++		iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
++		dwc_ep->pkt_info[i].status = 0;
++		dwc_ep->pkt_info[i].offset = 0;
++		dwc_ep->pkt_info[i].length = 0;
++	}
++
++	/* Call callback function to process data buffer */
++	ep->iso_req->status = 0;/* success */
++
++	SPIN_UNLOCK(&ep->pcd->lock);
++	ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
++	SPIN_LOCK(&ep->pcd->lock);
++}
++
++
++static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
++				gfp_t gfp_flags)
++{
++	struct usb_iso_request	*pReq = NULL;
++	uint32_t		req_size;
++
++
++	req_size = sizeof(struct usb_iso_request);
++	req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++
++	pReq = kmalloc(req_size, gfp_flags);
++	if (!pReq) {
++		DWC_WARN("%s, can't allocate Iso Request\n", __func__);
++		return 0;
++	}
++	pReq->iso_packet_desc0 = (void*) (pReq +  1);
++
++	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++	return pReq;
++}
++
++static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++	kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
++{
++	.ep_ops =
++	{
++		.enable		= dwc_otg_pcd_ep_enable,
++		.disable	= dwc_otg_pcd_ep_disable,
++
++		.alloc_request	= dwc_otg_pcd_alloc_request,
++		.free_request	= dwc_otg_pcd_free_request,
++
++		//.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
++		//.free_buffer	= dwc_otg_pcd_free_buffer,
++
++		.queue		= dwc_otg_pcd_ep_queue,
++		.dequeue	= dwc_otg_pcd_ep_dequeue,
++
++		.set_halt	= dwc_otg_pcd_ep_set_halt,
++		.fifo_status	= 0,
++		.fifo_flush = 0,
++	},
++	.iso_ep_start		= dwc_otg_pcd_iso_ep_start,
++	.iso_ep_stop		= dwc_otg_pcd_iso_ep_stop,
++	.alloc_iso_request 	= dwc_otg_pcd_alloc_iso_request,
++	.free_iso_request	= dwc_otg_pcd_free_iso_request,
++};
++
++#else
++
++
++static struct usb_ep_ops dwc_otg_pcd_ep_ops =
++{
++	.enable		= dwc_otg_pcd_ep_enable,
++	.disable	= dwc_otg_pcd_ep_disable,
++
++	.alloc_request	= dwc_otg_pcd_alloc_request,
++	.free_request	= dwc_otg_pcd_free_request,
++
++//	.alloc_buffer	= dwc_otg_pcd_alloc_buffer,
++//	.free_buffer	= dwc_otg_pcd_free_buffer,
++
++	.queue		= dwc_otg_pcd_ep_queue,
++	.dequeue	= dwc_otg_pcd_ep_dequeue,
++
++	.set_halt	= dwc_otg_pcd_ep_set_halt,
++	.fifo_status	= 0,
++	.fifo_flush = 0,
++
++
++};
++
++#endif /* DWC_EN_ISOC */
++/*	Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
++{
++	dwc_otg_pcd_t *pcd;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++	else {
++		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++		dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++	}
++
++	return 0;
++}
++
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
++{
++	uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	gotgctl_data_t val;
++
++	val.d32 = dwc_read_reg32(addr);
++	if (val.b.sesreq) {
++		DWC_ERROR("Session Request Already active!\n");
++			return;
++	}
++
++	DWC_NOTICE("Session Request Initated\n");
++	mem.d32 = dwc_read_reg32(addr);
++	mem.b.sesreq = 1;
++	dwc_write_reg32(addr, mem.d32);
++
++	/* Start the SRP timer */
++	dwc_otg_pcd_start_srp_timer(pcd);
++	return;
++}
++
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
++{
++	dctl_data_t dctl = {.d32=0};
++	volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
++
++	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++		if (pcd->remote_wakeup_enable) {
++			if (set) {
++				dctl.b.rmtwkupsig = 1;
++				dwc_modify_reg32(addr, 0, dctl.d32);
++				DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++				mdelay(1);
++				dwc_modify_reg32(addr, dctl.d32, 0);
++				DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++			}
++			else {
++			}
++		}
++		else {
++			DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++		}
++	}
++	return;
++}
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
++{
++	unsigned long flags;
++	dwc_otg_pcd_t *pcd;
++	dsts_data_t		dsts;
++	gotgctl_data_t	gotgctl;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++	else {
++		pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++	}
++	SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++	/*
++	 * This function starts the Protocol if no session is in progress. If
++	 * a session is already in progress, but the device is suspended,
++	 * remote wakeup signaling is started.
++	 */
++
++	/* Check if valid session */
++	gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++	if (gotgctl.b.bsesvld) {
++		/* Check if suspend state */
++		dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
++		if (dsts.b.suspsts) {
++			dwc_otg_pcd_remote_wakeup(pcd, 1);
++		}
++	}
++	else {
++		dwc_otg_pcd_initiate_srp(pcd);
++	}
++
++	SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++	return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops =
++{
++	.get_frame	 = dwc_otg_pcd_get_frame,
++	.wakeup		 = dwc_otg_pcd_wakeup,
++	// current versions must always be self-powered
++};
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
++{
++
++	if (!pcd->gadget.is_otg)
++		return;
++
++	if (reset) {
++		pcd->b_hnp_enable = 0;
++		pcd->a_hnp_support = 0;
++		pcd->a_alt_hnp_support = 0;
++	}
++
++	pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
++	pcd->gadget.a_hnp_support =  pcd->a_hnp_support;
++	pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
++}
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
++{
++	dwc_otg_pcd_t *pcd = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_pcd_handle_intr(pcd);
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++		dwc_otg_core_dev_init(GET_CORE_IF(pcd));
++	}
++	return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
++
++	dwc_otg_pcd_stop(pcd);
++	return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	if (pcd->driver && pcd->driver->resume) {
++		SPIN_UNLOCK(&pcd->lock);
++		pcd->driver->suspend(&pcd->gadget);
++		SPIN_LOCK(&pcd->lock);
++	}
++
++	return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++	if (pcd->driver && pcd->driver->resume) {
++			SPIN_UNLOCK(&pcd->lock);
++			pcd->driver->resume(&pcd->gadget);
++			SPIN_LOCK(&pcd->lock);
++	}
++
++	/* Stop the SRP timeout timer. */
++	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
++		(!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++		if (GET_CORE_IF(pcd)->srp_timer_started) {
++			GET_CORE_IF(pcd)->srp_timer_started = 0;
++			del_timer(&pcd->srp_timer);
++		}
++	}
++	return 1;
++}
++
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks =
++{
++	.start = dwc_otg_pcd_start_cb,
++	.stop = dwc_otg_pcd_stop_cb,
++	.suspend = dwc_otg_pcd_suspend_cb,
++	.resume_wakeup = dwc_otg_pcd_resume_cb,
++	.p = 0, /* Set at registration */
++};
++
++/**
++ * This function is called when the SRP timer expires.	The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(unsigned long ptr)
++{
++	gotgctl_data_t gotgctl;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
++	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++	gotgctl.d32 = dwc_read_reg32(addr);
++
++	core_if->srp_timer_started = 0;
++
++	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++		(core_if->core_params->i2c_enable)) {
++		DWC_PRINT("SRP Timeout\n");
++
++		if ((core_if->srp_success) &&
++			(gotgctl.b.bsesvld)) {
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++
++			/* Clear Session Request */
++			gotgctl.d32 = 0;
++			gotgctl.b.sesreq = 1;
++			dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++					  gotgctl.d32, 0);
++
++			core_if->srp_success = 0;
++		}
++		else {
++			DWC_ERROR("Device not connected/responding\n");
++			gotgctl.b.sesreq = 0;
++			dwc_write_reg32(addr, gotgctl.d32);
++		}
++	}
++	else if (gotgctl.b.sesreq) {
++		DWC_PRINT("SRP Timeout\n");
++
++		DWC_ERROR("Device not connected/responding\n");
++		gotgctl.b.sesreq = 0;
++		dwc_write_reg32(addr, gotgctl.d32);
++	}
++	else {
++		DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++	}
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
++{
++	struct timer_list *srp_timer = &pcd->srp_timer;
++	GET_CORE_IF(pcd)->srp_timer_started = 1;
++	init_timer(srp_timer);
++	srp_timer->function = srp_timeout;
++	srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
++	srp_timer->expires = jiffies + (HZ*6);
++	add_timer(srp_timer);
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t *ep);
++
++static void start_xfer_tasklet_func (unsigned long data)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
++	dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
++
++	int i;
++	depctl_data_t diepctl;
++
++	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++	diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++	if (pcd->ep0.queue_sof) {
++		pcd->ep0.queue_sof = 0;
++		start_next_request (&pcd->ep0);
++		// break;
++	}
++
++	for (i=0; i<core_if->dev_if->num_in_eps; i++)
++	{
++		depctl_data_t diepctl;
++		diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++		if (pcd->in_ep[i].queue_sof) {
++			pcd->in_ep[i].queue_sof = 0;
++			start_next_request (&pcd->in_ep[i]);
++			// break;
++		}
++	}
++
++	return;
++}
++
++
++
++
++
++
++
++static struct tasklet_struct start_xfer_tasklet = {
++	.next = NULL,
++	.state = 0,
++	.count = ATOMIC_INIT(0),
++	.func = start_xfer_tasklet_func,
++	.data = 0,
++};
++/**
++ * This function initialized the pcd Dp structures to there default
++ * state.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
++{
++	static const char * names[] =
++		{
++
++			"ep0",
++			"ep1in",
++			"ep2in",
++			"ep3in",
++			"ep4in",
++			"ep5in",
++			"ep6in",
++			"ep7in",
++			"ep8in",
++			"ep9in",
++			"ep10in",
++			"ep11in",
++			"ep12in",
++			"ep13in",
++			"ep14in",
++			"ep15in",
++			"ep1out",
++			"ep2out",
++			"ep3out",
++			"ep4out",
++			"ep5out",
++			"ep6out",
++			"ep7out",
++			"ep8out",
++			"ep9out",
++			"ep10out",
++			"ep11out",
++			"ep12out",
++			"ep13out",
++			"ep14out",
++			"ep15out"
++
++	};
++
++	int i;
++	int in_ep_cntr, out_ep_cntr;
++	uint32_t hwcfg1;
++	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	INIT_LIST_HEAD (&pcd->gadget.ep_list);
++	pcd->gadget.ep0 = &pcd->ep0.ep;
++	pcd->gadget.speed = USB_SPEED_UNKNOWN;
++
++	INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &pcd->ep0;
++
++	/* Init EP structure */
++	ep->desc = 0;
++	ep->pcd = pcd;
++	ep->stopped = 1;
++
++	/* Init DWC ep structure */
++	ep->dwc_ep.num = 0;
++	ep->dwc_ep.active = 0;
++	ep->dwc_ep.tx_fifo_num = 0;
++	/* Control until ep is actvated */
++	ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++	ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++	ep->dwc_ep.dma_addr = 0;
++	ep->dwc_ep.start_xfer_buff = 0;
++	ep->dwc_ep.xfer_buff = 0;
++	ep->dwc_ep.xfer_len = 0;
++	ep->dwc_ep.xfer_count = 0;
++	ep->dwc_ep.sent_zlp = 0;
++	ep->dwc_ep.total_len = 0;
++	ep->queue_sof = 0;
++	ep->dwc_ep.desc_addr = 0;
++	ep->dwc_ep.dma_desc_addr = 0;
++
++	ep->dwc_ep.aligned_buf=NULL;
++	ep->dwc_ep.aligned_buf_size=0;
++	ep->dwc_ep.aligned_dma_addr=0;
++
++
++	/* Init the usb_ep structure. */
++	ep->ep.name = names[0];
++	ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++	/**
++	 * @todo NGS: What should the max packet size be set to
++	 * here?  Before EP type is set?
++	 */
++	ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++	list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++	INIT_LIST_HEAD (&ep->queue);
++	/**
++	 * Initialize the EP structures.
++	 */
++	in_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++
++	for (i = 1; in_ep_cntr < num_in_eps; i++)
++	{
++		if((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++			in_ep_cntr ++;
++
++			/* Init EP structure */
++			ep->desc = 0;
++			ep->pcd = pcd;
++			ep->stopped = 1;
++
++			/* Init DWC ep structure */
++			ep->dwc_ep.is_in = 1;
++			ep->dwc_ep.num = i;
++			ep->dwc_ep.active = 0;
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			/* Control until ep is actvated */
++			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++			ep->dwc_ep.dma_addr = 0;
++			ep->dwc_ep.start_xfer_buff = 0;
++			ep->dwc_ep.xfer_buff = 0;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = 0;
++			ep->queue_sof = 0;
++			ep->dwc_ep.desc_addr = 0;
++			ep->dwc_ep.dma_desc_addr = 0;
++
++			/* Init the usb_ep structure. */
++			ep->ep.name = names[i];
++			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++			/**
++			 * @todo NGS: What should the max packet size be set to
++			 * here?  Before EP type is set?
++			 */
++			ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++			//add only even number ep as in
++			if((i%2)==1)
++				list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++			INIT_LIST_HEAD (&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	out_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++
++	for (i = 1; out_ep_cntr < num_out_eps; i++)
++	{
++		if((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++			out_ep_cntr++;
++
++			/* Init EP structure */
++			ep->desc = 0;
++			ep->pcd = pcd;
++			ep->stopped = 1;
++
++			/* Init DWC ep structure */
++			ep->dwc_ep.is_in = 0;
++			ep->dwc_ep.num = i;
++			ep->dwc_ep.active = 0;
++			ep->dwc_ep.tx_fifo_num = 0;
++			/* Control until ep is actvated */
++			ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++			ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++			ep->dwc_ep.dma_addr = 0;
++			ep->dwc_ep.start_xfer_buff = 0;
++			ep->dwc_ep.xfer_buff = 0;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = 0;
++			ep->queue_sof = 0;
++
++			/* Init the usb_ep structure. */
++			ep->ep.name = names[15 + i];
++			ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++			/**
++			 * @todo NGS: What should the max packet size be set to
++			 * here?  Before EP type is set?
++			 */
++			ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++			//add only odd number ep as out
++			if((i%2)==0)
++				list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++			INIT_LIST_HEAD (&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	/* remove ep0 from the list.  There is a ep0 pointer.*/
++	list_del_init (&pcd->ep0.ep.ep_list);
++
++	pcd->ep0state = EP0_DISCONNECT;
++	pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something?	Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
++}
++
++
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++u8 dev_id[]="gadget";
++int dwc_otg_pcd_init(struct platform_device *pdev)
++{
++	static char pcd_name[] = "dwc_otg_pcd";
++	dwc_otg_pcd_t *pcd;
++	dwc_otg_core_if_t* core_if;
++	dwc_otg_dev_if_t* dev_if;
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++	int retval = 0;
++
++
++	DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, pdev);
++	/*
++	 * Allocate PCD structure
++	 */
++	pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
++
++	if (pcd == 0) {
++		return -ENOMEM;
++	}
++
++	memset(pcd, 0, sizeof(dwc_otg_pcd_t));
++	spin_lock_init(&pcd->lock);
++
++	otg_dev->pcd = pcd;
++	s_pcd = pcd;
++	pcd->gadget.name = pcd_name;
++
++	pcd->gadget.dev.init_name = dev_id;
++	pcd->otg_dev = platform_get_drvdata(pdev);
++
++	pcd->gadget.dev.parent = &pdev->dev;
++	pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
++	pcd->gadget.ops = &dwc_otg_pcd_ops;
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	if(core_if->hwcfg4.b.ded_fifo_en) {
++		DWC_PRINT("Dedicated Tx FIFOs mode\n");
++	}
++	else {
++		DWC_PRINT("Shared Tx FIFO mode\n");
++	}
++
++	/* If the module is set to FS or if the PHY_TYPE is FS then the gadget
++	 * should not report as dual-speed capable.	 replace the following line
++	 * with the block of code below it once the software is debugged for
++	 * this.  If is_dualspeed = 0 then the gadget driver should not report
++	 * a device qualifier descriptor when queried. */
++	if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++		((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
++		 (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
++		 (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
++		pcd->gadget.max_speed = USB_SPEED_FULL;
++	}
++	else {
++		pcd->gadget.max_speed = USB_SPEED_HIGH;
++	}
++
++	if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++	(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++		pcd->gadget.is_otg = 0;
++	}
++	else {
++		pcd->gadget.is_otg = 1;
++	}
++
++
++	pcd->driver = 0;
++	/* Register the gadget device */
++printk("%s: 1\n",__func__);
++	retval = device_register(&pcd->gadget.dev);
++	if (retval != 0) {
++		kfree (pcd);
++printk("%s: 2\n",__func__);
++		return retval;
++	}
++
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_core_dev_init(core_if);
++	}
++
++	/*
++	 * Initialize EP structures
++	 */
++	dwc_otg_pcd_reinit(pcd);
++
++	/*
++	 * Register the PCD Callbacks.
++	 */
++	dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
++						pcd);
++	/*
++	 * Setup interupt handler
++	 */
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
++	retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
++				IRQF_SHARED, pcd->gadget.name, pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
++		device_unregister(&pcd->gadget.dev);
++		kfree (pcd);
++		return -EBUSY;
++	}
++
++	/*
++	 * Initialize the DMA buffer for SETUP packets
++	 */
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
++		if (pcd->setup_pkt == 0) {
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
++		if (pcd->status_buf == 0) {
++			dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
++			dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
++			dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
++			dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
++
++			if(dev_if->setup_desc_addr[0] == 0
++			|| dev_if->setup_desc_addr[1] == 0
++			|| dev_if->in_desc_addr == 0
++			|| dev_if->out_desc_addr == 0 ) {
++
++				if(dev_if->out_desc_addr)
++					dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++				if(dev_if->in_desc_addr)
++					dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++				if(dev_if->setup_desc_addr[1])
++					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++				if(dev_if->setup_desc_addr[0])
++					dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++
++
++				dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
++				dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++
++				free_irq(otg_dev->irq, pcd);
++				device_unregister(&pcd->gadget.dev);
++				kfree (pcd);
++
++				return -ENOMEM;
++			}
++		}
++	}
++	else {
++		pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
++		if (pcd->setup_pkt == 0) {
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++
++		pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
++		if (pcd->status_buf == 0) {
++			kfree(pcd->setup_pkt);
++			free_irq(otg_dev->irq, pcd);
++			device_unregister(&pcd->gadget.dev);
++			kfree (pcd);
++			return -ENOMEM;
++		}
++	}
++
++
++	/* Initialize tasklet */
++	start_xfer_tasklet.data = (unsigned long)pcd;
++	pcd->start_xfer_tasklet = &start_xfer_tasklet;
++
++	return 0;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void dwc_otg_pcd_remove(struct platform_device *pdev)
++{
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++	dwc_otg_pcd_t *pcd = otg_dev->pcd;
++	dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pdev);
++
++	/*
++	 * Free the IRQ
++	 */
++	free_irq(otg_dev->irq, pcd);
++
++	 /* start with the driver above us */
++	if (pcd->driver) {
++		/* should have been done already by driver model core */
++		DWC_WARN("driver '%s' is still registered\n",
++				 pcd->driver->driver.name);
++		usb_gadget_unregister_driver(pcd->driver);
++	}
++	device_unregister(&pcd->gadget.dev);
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++		dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++		}
++	}
++	else {
++		kfree (pcd->setup_pkt);
++		kfree (pcd->status_buf);
++	}
++
++	kfree(pcd);
++	otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests.  then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ */
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
++	int (*bind)(struct usb_gadget *))
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
++
++	if (!driver || driver->max_speed == USB_SPEED_UNKNOWN ||
++		!bind ||
++		!driver->unbind ||
++		!driver->disconnect ||
++		!driver->setup) {
++		DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
++		return -EINVAL;
++	}
++	if (s_pcd == 0) {
++		DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
++		return -ENODEV;
++	}
++	if (s_pcd->driver != 0) {
++		DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
++		return -EBUSY;
++	}
++
++	/* hook up the driver */
++	s_pcd->driver = driver;
++	s_pcd->gadget.dev.driver = &driver->driver;
++
++	DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++	retval = bind(&s_pcd->gadget);
++	if (retval) {
++		DWC_ERROR("bind to driver %s --> error %d\n",
++					driver->driver.name, retval);
++		s_pcd->driver = 0;
++		s_pcd->gadget.dev.driver = 0;
++		return retval;
++	}
++	DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++					driver->driver.name);
++	return 0;
++}
++
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	//DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++	if (s_pcd == 0) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++				-ENODEV);
++		return -ENODEV;
++	}
++	if (driver == 0 || driver != s_pcd->driver) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++				-EINVAL);
++		return -EINVAL;
++	}
++
++	driver->unbind(&s_pcd->gadget);
++	s_pcd->driver = 0;
++
++	DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
++			driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_pcd.h
+@@ -0,0 +1,292 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: #36 $
++ * $Date: 2008/09/26 $
++ * $Change: 1103515 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include <linux/types.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++
++struct dwc_otg_device;
++
++#include "otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.	 For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used.  The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE	64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** Max Transfer size for any EP */
++#define MAX_TRANSFER_SIZE 65535
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 64
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state
++{
++	EP0_DISCONNECT,		/* no host */
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_IN_STATUS_PHASE,
++	EP0_OUT_STATUS_PHASE,
++	EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request  dwc_otg_pcd_iso_request_t;
++
++/**	  PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep
++{
++	/** USB EP data */
++	struct usb_ep		ep;
++	/** USB EP Descriptor */
++	const struct usb_endpoint_descriptor	*desc;
++
++	/** queue of dwc_otg_pcd_requests. */
++	struct list_head	queue;
++	unsigned stopped : 1;
++	unsigned disabling : 1;
++	unsigned dma : 1;
++	unsigned queue_sof : 1;
++
++#ifdef DWC_EN_ISOC
++	/** DWC_otg Isochronous Transfer */
++	struct usb_iso_request* iso_req;
++#endif //DWC_EN_ISOC
++
++	/** DWC_otg ep data. */
++	dwc_ep_t dwc_ep;
++
++	/** Pointer to PCD */
++	struct dwc_otg_pcd *pcd;
++}dwc_otg_pcd_ep_t;
++
++
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++typedef struct dwc_otg_pcd
++{
++	/** USB gadget */
++	struct usb_gadget gadget;
++	/** USB gadget driver pointer*/
++	struct usb_gadget_driver *driver;
++	/** The DWC otg device pointer. */
++	struct dwc_otg_device *otg_dev;
++
++	/** State of EP0 */
++	ep0state_e	ep0state;
++	/** EP0 Request is pending */
++	unsigned	ep0_pending : 1;
++	/** Indicates when SET CONFIGURATION Request is in process */
++	unsigned	request_config : 1;
++	/** The state of the Remote Wakeup Enable. */
++	unsigned	remote_wakeup_enable : 1;
++	/** The state of the B-Device HNP Enable. */
++	unsigned	b_hnp_enable : 1;
++	/** The state of A-Device HNP Support. */
++	unsigned	a_hnp_support : 1;
++	/** The state of the A-Device Alt HNP support. */
++	unsigned	a_alt_hnp_support : 1;
++	/** Count of pending Requests */
++	unsigned	request_pending;
++
++		/** SETUP packet for EP0
++	 * This structure is allocated as a DMA buffer on PCD initialization
++	 * with enough space for up to 3 setup packets.
++	 */
++	union
++	{
++			struct usb_ctrlrequest	req;
++			uint32_t	d32[2];
++	} *setup_pkt;
++
++	dma_addr_t setup_pkt_dma_handle;
++
++	/** 2-byte dma buffer used to return status from GET_STATUS */
++	uint16_t *status_buf;
++	dma_addr_t status_buf_dma_handle;
++
++	/** EP0 */
++	dwc_otg_pcd_ep_t ep0;
++
++	/** Array of IN EPs. */
++	dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
++	/** Array of OUT EPs. */
++	dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
++	/** number of valid EPs in the above array. */
++//	  unsigned	num_eps : 4;
++	spinlock_t	lock;
++	/** Timer for SRP.	If it expires before SRP is successful
++	 * clear the SRP. */
++	struct timer_list srp_timer;
++
++	/** Tasklet to defer starting of TEST mode transmissions until
++	 *	Status Phase has been completed.
++	 */
++	struct tasklet_struct test_mode_tasklet;
++
++	/** Tasklet to delay starting of xfer in DMA mode */
++	struct tasklet_struct *start_xfer_tasklet;
++
++	/** The test mode to enter when the tasklet is executed. */
++	unsigned test_mode;
++
++} dwc_otg_pcd_t;
++
++
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct
++{
++	struct usb_request	req; /**< USB Request. */
++	struct list_head	queue;	/**< queue of these requests. */
++} dwc_otg_pcd_request_t;
++
++
++extern int dwc_otg_pcd_init(struct platform_device *pdev);
++
++//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
++extern void dwc_otg_pcd_remove( struct platform_device *pdev );
++extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
++extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
++
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
++
++extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
++				int status);
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
++extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
++					const unsigned reset);
++#ifndef VERBOSE
++#define VERIFY_PCD_DMA_ADDR(_addr_) 	BUG_ON(((_addr_)==DMA_ADDR_INVALID)||\
++				       ((_addr_)==0)||\
++				       ((_addr_)&0x3))
++#else
++#define VERIFY_PCD_DMA_ADDR(_addr_) 	{\
++						if(((_addr_)==DMA_ADDR_INVALID)||\
++						       ((_addr_)==0)||\
++						       ((_addr_)&0x3)) {\
++							printk("%s: Invalid DMA address "#_addr_"(%.8x)\n",__func__,_addr_);\
++							BUG();\
++						}\
++					}
++#endif
++
++
++static inline void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
++//void ep_check_and_patch_dma_addr(dwc_otg_pcd_ep_t *ep){
++	dwc_ep_t *dwc_ep=&ep->dwc_ep;
++
++DWC_DEBUGPL(DBG_PCDV,"%s: dwc_ep xfer_buf=%.8x, total_len=%d, dma_addr=%.8x\n",__func__,(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->dma_addr);
++	if (/*(core_if->dma_enable)&&*/(dwc_ep->dma_addr==DMA_ADDR_INVALID)) {
++		if((((u32)dwc_ep->xfer_buff)&0x3)==0){
++			dwc_ep->dma_addr=dma_map_single(NULL,(void *)(dwc_ep->start_xfer_buff),(dwc_ep->total_len), DMA_TO_DEVICE);
++DWC_DEBUGPL(DBG_PCDV,"    got dma_addr=%.8x\n",dwc_ep->dma_addr);
++		}else{
++DWC_DEBUGPL(DBG_PCDV,"    buf not aligned, use aligned_buf instead. xfer_buf=%.8x, total_len=%d, aligned_buf_size=%d\n",(u32)dwc_ep->xfer_buff,(dwc_ep->total_len),dwc_ep->aligned_buf_size);
++			if(dwc_ep->aligned_buf_size<dwc_ep->total_len){
++				if(dwc_ep->aligned_buf){
++//printk("    free buff dwc_ep aligned_buf_size=%d, aligned_buf(%.8x), aligned_dma_addr(%.8x));\n",dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
++					//dma_free_coherent(NULL,dwc_ep->aligned_buf_size,dwc_ep->aligned_buf,dwc_ep->aligned_dma_addr);
++					kfree(dwc_ep->aligned_buf);
++				}
++				dwc_ep->aligned_buf_size=((1<<20)>(dwc_ep->total_len<<1))?(dwc_ep->total_len<<1):(1<<20);
++				//dwc_ep->aligned_buf = dma_alloc_coherent (NULL, dwc_ep->aligned_buf_size, &dwc_ep->aligned_dma_addr, GFP_KERNEL|GFP_DMA);
++				dwc_ep->aligned_buf=kmalloc(dwc_ep->aligned_buf_size,GFP_KERNEL|GFP_DMA|GFP_ATOMIC);
++				dwc_ep->aligned_dma_addr=dma_map_single(NULL,(void *)(dwc_ep->aligned_buf),(dwc_ep->aligned_buf_size),DMA_FROM_DEVICE);
++				if(!dwc_ep->aligned_buf){
++					DWC_ERROR("Cannot alloc required buffer!!\n");
++					BUG();
++				}
++DWC_DEBUGPL(DBG_PCDV,"    dwc_ep allocated aligned buf=%.8x, dma_addr=%.8x, size=%d(0x%x)\n", (u32)dwc_ep->aligned_buf, dwc_ep->aligned_dma_addr, dwc_ep->aligned_buf_size, dwc_ep->aligned_buf_size);
++			}
++			dwc_ep->dma_addr=dwc_ep->aligned_dma_addr;
++			if(dwc_ep->is_in) {
++				memcpy(dwc_ep->aligned_buf,dwc_ep->xfer_buff,dwc_ep->total_len);
++				dma_sync_single_for_device(NULL,dwc_ep->dma_addr,dwc_ep->total_len,DMA_TO_DEVICE);
++			}
++		}
++	}
++}
++
++#endif
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_pcd_intr.c
+@@ -0,0 +1,3682 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: #83 $
++ * $Date: 2008/10/14 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <linux/pci.h>
++
++#include "otg_driver.h"
++#include "otg_pcd.h"
++
++
++#define DEBUG_EP0
++
++
++/* request functions defined in "dwc_otg_pcd.c" */
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
++{
++#ifdef DEBUG
++	char str[40];
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		strcpy(str, "EP0_DISCONNECT");
++		break;
++	case EP0_IDLE:
++		strcpy(str, "EP0_IDLE");
++		break;
++	case EP0_IN_DATA_PHASE:
++		strcpy(str, "EP0_IN_DATA_PHASE");
++		break;
++	case EP0_OUT_DATA_PHASE:
++		strcpy(str, "EP0_OUT_DATA_PHASE");
++		break;
++	case EP0_IN_STATUS_PHASE:
++		strcpy(str,"EP0_IN_STATUS_PHASE");
++		break;
++	case EP0_OUT_STATUS_PHASE:
++		strcpy(str,"EP0_OUT_STATUS_PHASE");
++		break;
++	case EP0_STALL:
++		strcpy(str,"EP0_STALL");
++		break;
++	default:
++		strcpy(str,"EP0_INVALID");
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++	int i;
++	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	if(ep_num == 0) {
++		return &pcd->ep0;
++	}
++	else {
++		for(i = 0; i < num_in_eps; ++i)
++		{
++			if(pcd->in_ep[i].dwc_ep.num == ep_num)
++				return &pcd->in_ep[i];
++		}
++		return 0;
++	}
++}
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++	int i;
++	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++	if(ep_num == 0) {
++		return &pcd->ep0;
++	}
++	else {
++		for(i = 0; i < num_out_eps; ++i)
++		{
++			if(pcd->out_ep[i].dwc_ep.num == ep_num)
++				return &pcd->out_ep[i];
++		}
++		return 0;
++	}
++}
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
++{
++	dwc_otg_pcd_ep_t	*ep;
++
++	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++		return &pcd->ep0;
++	list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
++	{
++		u8	bEndpointAddress;
++
++		if (!ep->desc)
++			continue;
++
++		bEndpointAddress = ep->desc->bEndpointAddress;
++		if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
++			== (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
++			return ep;
++	}
++	return NULL;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_pcd_request_t *req = 0;
++	uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++	if (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next,
++			   dwc_otg_pcd_request_t, queue);
++
++		/* Setup and start the Transfer */
++		ep->dwc_ep.dma_addr = req->req.dma;
++		ep->dwc_ep.start_xfer_buff = req->req.buf;
++		ep->dwc_ep.xfer_buff = req->req.buf;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = req->req.length;
++		ep->dwc_ep.xfer_len = 0;
++		ep->dwc_ep.xfer_count = 0;
++
++		if(max_transfer > MAX_TRANSFER_SIZE) {
++			ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++		} else {
++			ep->dwc_ep.maxxfer = max_transfer;
++		}
++
++		if(req->req.zero) {
++			if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++					&& (ep->dwc_ep.total_len != 0)) {
++				ep->dwc_ep.sent_zlp = 1;
++			}
++
++		}
++	 	ep_check_and_patch_dma_addr(ep);
++		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	}
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sofintr = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO.  The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ *		info
++ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
++ *		and exit
++ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ *		SETUP data to the buffer
++ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ *		to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t gintmask = {.d32=0};
++	device_grxsts_data_t status;
++	dwc_otg_pcd_ep_t *ep;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
++#endif
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++	/* Disable the Rx Status Queue Level interrupt */
++	gintmask.b.rxstsqlvl= 1;
++	dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
++
++	/* Get the Status from the top of the FIFO */
++	status.d32 = dwc_read_reg32(&global_regs->grxstsp);
++
++	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++					"pktsts:%x Frame:%d(0x%0x)\n",
++					status.b.epnum, status.b.bcnt,
++					dpid_str[status.b.dpid],
++					status.b.pktsts, status.b.fn, status.b.fn);
++	/* Get pointer to EP structure */
++	ep = get_out_ep(pcd, status.b.epnum);
++
++	switch (status.b.pktsts) {
++	case DWC_DSTS_GOUT_NAK:
++		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++		break;
++	case DWC_STS_DATA_UPDT:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++			/** @todo NGS Check for buffer overflow? */
++			dwc_otg_read_packet(core_if,
++						 ep->dwc_ep.xfer_buff,
++						 status.b.bcnt);
++			ep->dwc_ep.xfer_count += status.b.bcnt;
++			ep->dwc_ep.xfer_buff += status.b.bcnt;
++		}
++		break;
++	case DWC_STS_XFER_COMP:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++		break;
++	case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++		break;
++case DWC_DSTS_SETUP_UPDT:
++		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD,
++				"SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++				pcd->setup_pkt->req.bRequestType,
++				pcd->setup_pkt->req.bRequest,
++				pcd->setup_pkt->req.wValue,
++				pcd->setup_pkt->req.wIndex,
++				pcd->setup_pkt->req.wLength);
++#endif
++		ep->dwc_ep.xfer_count += status.b.bcnt;
++		break;
++	default:
++		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++				status.b.pktsts);
++		break;
++	}
++
++	/* Enable the Rx Status Queue Level interrupt */
++	dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++	return 1;
++}
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received.  This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++			core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	int ndx = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++	int epnum = 0;
++
++	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++)
++	{
++		in_tkn_epnums[ i ] = dwc_read_reg32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
++				in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		}
++		else {
++			++addr;
++		}
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	/* Get the EP numbers */
++	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++	ndx = dtknqr1.b.intknwptr - 1;
++
++	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++	if (ndx == -1) {
++		/** @todo Find a simpler way to calculate the max
++		 * queue position.*/
++		int cnt = TOKEN_Q_DEPTH;
++		if (TOKEN_Q_DEPTH <= 6) {
++			cnt = TOKEN_Q_DEPTH - 1;
++		}
++		else if (TOKEN_Q_DEPTH <= 14) {
++			cnt = TOKEN_Q_DEPTH - 7;
++		}
++		else if (TOKEN_Q_DEPTH <= 22) {
++			cnt = TOKEN_Q_DEPTH - 15;
++		}
++		else {
++			cnt = TOKEN_Q_DEPTH - 23;
++		}
++		epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
++	}
++	else {
++		if (ndx <= 5) {
++			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 13) {
++			ndx -= 6;
++			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 21) {
++			ndx -= 14;
++			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++		}
++		else if (ndx <= 29) {
++			ndx -= 22;
++			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++		}
++	}
++	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++	return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	gnptxsts_data_t txstatus = {.d32 = 0};
++	gintsts_data_t gintsts;
++
++	int epnum = 0;
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	/* Get the epnum from the IN Token Learning Queue. */
++	epnum = get_ep_of_last_in_token(core_if);
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++	dwords = (len + 3)/4;
++
++	/* While there is space in the queue and space in the FIFO and
++	* More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
++
++	while  (txstatus.b.nptxqspcavail > 0 &&
++		txstatus.b.nptxfspcavail > dwords &&
++		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++			dwc_read_reg32(&global_regs->gnptxsts));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.nptxfempty = 1;
++	dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t* dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0};
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++
++	dwords = (len + 3)/4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
++
++	while  (txstatus.b.txfspcavail > dwords &&
++		ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++		ep->dwc_ep.xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3)/4;
++		txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
++{
++	int i, num_in_eps, num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++	/* don't disconnect drivers more than once */
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++		return;
++	}
++	pcd->ep0state = EP0_DISCONNECT;
++
++	/* Reset the OTG state. */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Disable the NP Tx Fifo Empty Interrupt. */
++	intr_mask.b.nptxfempty = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					 intr_mask.d32, 0);
++
++	/* Flush the FIFOs */
++	/**@todo NGS Flush Periodic FIFOs */
++	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	ep = &pcd->ep0;
++	dwc_otg_request_nuke(ep);
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_in_eps; i++)
++	{
++		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_out_eps; i++)
++	{
++		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (pcd->driver && pcd->driver->disconnect) {
++		SPIN_UNLOCK(&pcd->lock);
++		pcd->driver->disconnect(&pcd->gadget);
++		SPIN_LOCK(&pcd->lock);
++	}
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++	intr_mask.b.i2cintr = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++				intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.i2cintr = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++	return 1;
++}
++
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
++{
++	gintsts_data_t gintsts;
++#if defined(VERBOSE)
++	DWC_PRINT("Early Suspend Detected\n");
++#endif
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.erlysuspend = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd	  Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz0_data_t doeptsize0 = { .d32 = 0};
++	dwc_otg_dma_desc_t* dma_desc;
++	depctl_data_t doepctl = { .d32 = 0 };
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
++				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++
++	doeptsize0.b.supcnt = 3;
++	doeptsize0.b.pktcnt = 1;
++	doeptsize0.b.xfersize = 8*3;
++
++	if (core_if->dma_enable) {
++		if (!core_if->dma_desc_enable) {
++			/** put here as for Hermes mode deptisz register should not be written */
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++			 doeptsize0.d32);
++
++			/** @todo dma needs to handle multiple setup packets (up to 3) */
++			VERIFY_PCD_DMA_ADDR(pcd->setup_pkt_dma_handle);
++
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
++			pcd->setup_pkt_dma_handle);
++		} else {
++			dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
++			dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++			dma_desc->buf = pcd->setup_pkt_dma_handle;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			VERIFY_PCD_DMA_ADDR(dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
++			dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
++		}
++
++	} else {
++		/** put here as for Hermes mode deptisz register should not be written */
++		dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++					 doeptsize0.d32);
++	}
++
++	/** DOEPCTL0 Register write */
++	doepctl.b.epena = 1;
++	doepctl.b.cnak = 1;
++	dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++				dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++				dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++/**
++ * This interrupt occurs when a USB Reset is detected.	When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ *	-#	Unmask the following interrupt bits
++ *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ *	- DOEPMSK.SETUP = 1
++ *	- DOEPMSK.XferCompl = 1
++ *	- DIEPMSK.XferCompl = 1
++ *	- DIEPMSK.TimeOut = 1
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t doepctl = { .d32 = 0};
++
++	daint_data_t daintmsk = { .d32 = 0};
++	doepmsk_data_t doepmsk = { .d32 = 0};
++	diepmsk_data_t diepmsk = { .d32 = 0};
++
++	dcfg_data_t dcfg = { .d32=0 };
++	grstctl_t resetctl = { .d32=0 };
++	dctl_data_t dctl = {.d32=0};
++	int i = 0;
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("USB RESET\n");
++#ifdef DWC_EN_ISOC
++	for(i = 1;i < 16; ++i)
++	{
++		dwc_otg_pcd_ep_t *ep;
++		dwc_ep_t *dwc_ep;
++		ep = get_in_ep(pcd,i);
++		if(ep != 0){
++			dwc_ep = &ep->dwc_ep;
++			dwc_ep->next_frame = 0xffffffff;
++		}
++	}
++#endif /* DWC_EN_ISOC  */
++
++	/* reset the HNP settings */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Clear the Remote Wakeup Signalling */
++	dctl.b.rmtwkupsig = 1;
++	dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++					  dctl.d32, 0);
++
++	/* Set NAK for all OUT EPs */
++	doepctl.b.snak = 1;
++	for (i=0; i <= dev_if->num_out_eps; i++)
++	{
++		dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
++						 doepctl.d32);
++	}
++
++	/* Flush the NP Tx FIFO */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);
++	/* Flush the Learning Queue */
++	resetctl.b.intknqflsh = 1;
++	dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	if(core_if->multiproc_int_enable) {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if(core_if->dma_desc_enable) {
++			doepmsk.b.stsphsercvd = 1;
++			doepmsk.b.bna = 1;
++		}
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++
++		if(core_if->dma_enable) {
++			doepmsk.b.nak = 1;
++		}
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++
++		if(core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++/*
++		if(core_if->dma_enable) {
++			diepmsk.b.nak = 1;
++		}
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
++	} else{
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if(core_if->dma_desc_enable) {
++			doepmsk.b.stsphsercvd = 1;
++			doepmsk.b.bna = 1;
++		}
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++		doepmsk.b.nak = 1;
++*/
++		dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++
++		if(core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++
++//		diepmsk.b.nak = 1;
++
++		dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++	}
++
++	/* Reset Device Address */
++	dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.devaddr = 0;
++	dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* setup EP0 to receive SETUP packets */
++	ep0_out_start(core_if, pcd);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbreset = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t *core_if)
++{
++	dsts_data_t dsts;
++	enum usb_device_speed speed = USB_SPEED_UNKNOWN;
++	dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++		speed = USB_SPEED_HIGH;
++		break;
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		speed = USB_SPEED_FULL;
++		break;
++
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		speed = USB_SPEED_LOW;
++		break;
++	}
++
++	return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	gintsts_data_t gintsts;
++	gusbcfg_data_t gusbcfg;
++	dwc_otg_core_global_regs_t *global_regs =
++		GET_CORE_IF(pcd)->core_global_regs;
++	uint8_t utmi16b, utmi8b;
++//	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++	DWC_PRINT("SPEED ENUM\n");
++
++	if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
++		utmi16b = 6;
++		utmi8b = 9;
++	} else {
++		utmi16b = 4;
++		utmi8b = 8;
++	}
++	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		pcd->ep0state = EP0_IDLE;
++	}
++	else if (pcd->ep0state == EP0_STALL) {
++		pcd->ep0state = EP0_IDLE;
++	}
++
++	pcd->ep0state = EP0_IDLE;
++
++	ep0->stopped = 0;
++
++	pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
++
++	/* Set USB turnaround time based on device speed and PHY interface. */
++	gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++	if (pcd->gadget.speed == USB_SPEED_HIGH) {
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++			/* ULPI interface */
++			gusbcfg.b.usbtrdtim = 9;
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++			/* UTMI+ interface */
++			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			}
++			else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++			else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			}
++			else {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++			/* UTMI+  OR  ULPI interface */
++			if (gusbcfg.b.ulpi_utmi_sel == 1) {
++				/* ULPI interface */
++				gusbcfg.b.usbtrdtim = 9;
++			}
++			else {
++				/* UTMI+ interface */
++				if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
++					gusbcfg.b.usbtrdtim = utmi16b;
++				}
++				else {
++					gusbcfg.b.usbtrdtim = utmi8b;
++				}
++			}
++		}
++	}
++	else {
++		/* Full or low speed */
++		gusbcfg.b.usbtrdtim = 9;
++	}
++	dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.enumdone = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			 gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++			  "ISOC Out Dropped");
++
++	intr_mask.b.isooutdrop = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++
++	gintsts.d32 = 0;
++	gintsts.b.isooutdrop = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			 gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions.  If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++	intr_mask.b.eopframe = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.eopframe = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received.	The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.epmismatch = 1;
++	dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	struct usb_ctrlrequest	*ctrl = &pcd->setup_pkt->req;
++	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++			 ctrl->bRequestType, ctrl->bRequest, err_val);
++
++	ep0->dwc_ep.is_in = 1;
++	dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
++	pcd->ep0.stopped = 1;
++	pcd->ep0state = EP0_IDLE;
++	ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
++					struct usb_ctrlrequest * ctrl)
++{
++	int ret = 0;
++	if (pcd->driver && pcd->driver->setup) {
++		SPIN_UNLOCK(&pcd->lock);
++		ret = pcd->driver->setup(&pcd->gadget, ctrl);
++		SPIN_LOCK(&pcd->lock);
++		if (ret < 0) {
++			ep0_do_stall(pcd, ret);
++		}
++
++		/** @todo This is a g_file_storage gadget driver specific
++		 * workaround: a DELAYED_STATUS result from the fsg_setup
++		 * routine will result in the gadget queueing a EP0 IN status
++		 * phase for a two-stage control transfer.	Exactly the same as
++		 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++		 * specific request.  Need a generic way to know when the gadget
++		 * driver will queue the status phase.	Can we assume when we
++		 * call the gadget driver setup() function that it will always
++		 * queue and require the following flag?  Need to look into
++		 * this.
++		 */
++
++		if (ret == 256 + 999) {
++			pcd->request_config = 1;
++		}
++	}
++}
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		return;
++	}
++
++	pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++	/* Prepare for more SETUP Packets */
++	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 1;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++//	if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++		return;
++	}
++	pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 0;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	if(GET_CORE_IF(pcd)->dma_enable == 0) {
++			ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
++{
++	if(ep->dwc_ep.stall_clear_flag == 0)
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++	/* Reactive the EP */
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (ep->stopped) {
++		ep->stopped = 0;
++		/* If there is a request in the EP queue start it */
++
++		/** @todo FIXME: this causes an EP mismatch in DMA mode.
++		 * epmismatch not yet implemented. */
++
++		/*
++		 * Above fixme is solved by implmenting a tasklet to call the
++		 * start_next_request(), outside of interrupt context at some
++		 * time after the current time, after a clear-halt setup packet.
++		 * Still need to implement ep mismatch in the future if a gadget
++		 * ever uses more than one endpoint at once
++		 */
++		ep->queue_sof = 1;
++		tasklet_schedule (pcd->start_xfer_tasklet);
++	}
++	/* Start Control Status Phase */
++	do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host.  The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode.  This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++static void do_test_mode(unsigned long data)
++{
++	dctl_data_t		dctl;
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int test_mode = pcd->test_mode;
++
++
++//	  DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++	dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
++	switch (test_mode) {
++	case 1: // TEST_J
++		dctl.b.tstctl = 1;
++		break;
++
++	case 2: // TEST_K
++		dctl.b.tstctl = 2;
++		break;
++
++	case 3: // TEST_SE0_NAK
++		dctl.b.tstctl = 3;
++		break;
++
++	case 4: // TEST_PACKET
++		dctl.b.tstctl = 4;
++		break;
++
++	case 5: // TEST_FORCE_ENABLE
++		dctl.b.tstctl = 5;
++		break;
++	}
++	dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t *pcd)
++{
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep;
++	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
++	uint16_t		*status = pcd->status_buf;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD,
++			"GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		*status = 0x1; /* Self powered */
++		*status |= pcd->remote_wakeup_enable << 1;
++		break;
++
++	case USB_RECIP_INTERFACE:
++		*status = 0;
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		ep = get_ep_by_addr(pcd, ctrl.wIndex);
++		if (ep == 0 || ctrl.wLength > 2) {
++			ep0_do_stall(pcd, -EOPNOTSUPP);
++			return;
++		}
++		/** @todo check for EP stall */
++		*status = ep->stopped;
++		break;
++	}
++	pcd->ep0_pending = 1;
++	ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
++	ep0->dwc_ep.xfer_buff = (uint8_t *)status;
++	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++	ep0->dwc_ep.xfer_len = 2;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep = 0;
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	gotgctl_data_t gotgctl = { .d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++	DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
++
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		switch (ctrl.wValue) {
++		case USB_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 1;
++			break;
++
++		case USB_DEVICE_TEST_MODE:
++			/* Setup the Test Mode tasklet to do the Test
++			 * Packet generation after the SETUP Status
++			 * phase has completed. */
++
++			/** @todo This has not been tested since the
++			 * tasklet struct was put into the PCD
++			 * struct! */
++			pcd->test_mode_tasklet.next = 0;
++			pcd->test_mode_tasklet.state = 0;
++			atomic_set(&pcd->test_mode_tasklet.count, 0);
++			pcd->test_mode_tasklet.func = do_test_mode;
++			pcd->test_mode_tasklet.data = (unsigned long)pcd;
++			pcd->test_mode = ctrl.wIndex >> 8;
++			tasklet_schedule(&pcd->test_mode_tasklet);
++			break;
++
++		case USB_DEVICE_B_HNP_ENABLE:
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++			/* dev may initiate HNP */
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->b_hnp_enable = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++				/**@todo Is the gotgctl.devhnpen cleared
++				 * by a USB Reset? */
++				gotgctl.b.devhnpen = 1;
++				gotgctl.b.hnpreq = 1;
++				dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++
++		case USB_DEVICE_A_HNP_SUPPORT:
++			/* RH port supports HNP */
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++
++		case USB_DEVICE_A_ALT_HNP_SUPPORT:
++			/* other RH port does */
++			DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_alt_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			}
++			else {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++			}
++			break;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case USB_RECIP_INTERFACE:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		if (ctrl.wValue == USB_ENDPOINT_HALT) {
++			ep = get_ep_by_addr(pcd, ctrl.wIndex);
++			if (ep == 0) {
++				ep0_do_stall(pcd, -EOPNOTSUPP);
++				return;
++			}
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++	}
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
++{
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep = 0;
++
++	DWC_DEBUGPL(DBG_PCD,
++				"CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++				ctrl.bRequestType, ctrl.bRequest,
++				ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++	switch (ctrl.bRequestType & USB_RECIP_MASK) {
++	case USB_RECIP_DEVICE:
++		switch (ctrl.wValue) {
++		case USB_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 0;
++			break;
++
++		case USB_DEVICE_TEST_MODE:
++			/** @todo Add CLEAR_FEATURE for TEST modes. */
++			break;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case USB_RECIP_ENDPOINT:
++		ep = get_ep_by_addr(pcd, ctrl.wIndex);
++		if (ep == 0) {
++			ep0_do_stall(pcd, -EOPNOTSUPP);
++			return;
++		}
++
++		pcd_clear_halt(pcd, ep);
++
++		break;
++	}
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++
++	if (ctrl.bRequestType == USB_RECIP_DEVICE) {
++		dcfg_data_t dcfg = {.d32=0};
++
++#ifdef DEBUG_EP0
++//			DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++		dcfg.b.devaddr = ctrl.wValue;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++		do_setup_in_status_phase(pcd);
++	}
++}
++
++/**
++ *	This function processes SETUP commands.	 In Linux, the USB Command
++ *	processing is done in two places - the first being the PCD and the
++ *	second in the Gadget Driver (for example, the File-Backed Storage
++ *	Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD.  Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	struct usb_ctrlrequest	ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t	*ep0 = &pcd->ep0;
++
++	deptsiz0_data_t doeptsize0 = { .d32 = 0};
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++			ctrl.bRequestType, ctrl.bRequest,
++			ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++	doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++	/** @todo handle > 1 setup packet , assert error for now */
++
++	if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
++		DWC_ERROR ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
++	}
++
++	/* Clean up the request queue */
++	dwc_otg_request_nuke(ep0);
++	ep0->stopped = 0;
++
++	if (ctrl.bRequestType & USB_DIR_IN) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_DATA_PHASE;
++	}
++	else {
++		ep0->dwc_ep.is_in = 0;
++		pcd->ep0state = EP0_OUT_DATA_PHASE;
++	}
++
++	if(ctrl.wLength == 0) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_STATUS_PHASE;
++	}
++
++	if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
++		/* handle non-standard (class/vendor) requests in the gadget driver */
++		do_gadget_setup(pcd, &ctrl);
++		return;
++	}
++
++	/** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++	switch (ctrl.bRequest) {
++	case USB_REQ_GET_STATUS:
++		do_get_status(pcd);
++		break;
++
++	case USB_REQ_CLEAR_FEATURE:
++		do_clear_feature(pcd);
++		break;
++
++	case USB_REQ_SET_FEATURE:
++		do_set_feature(pcd);
++		break;
++
++	case USB_REQ_SET_ADDRESS:
++		do_set_address(pcd);
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++	case USB_REQ_SET_CONFIGURATION:
++//		_pcd->request_config = 1;	/* Configuration changed */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case USB_REQ_SYNCH_FRAME:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	default:
++		/* Call the Gadget Driver's setup functions */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++	}
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++			dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++	deptsiz0_data_t deptsiz;
++	desc_sts_data_t desc_sts;
++	dwc_otg_pcd_request_t *req;
++	int is_last = 0;
++	dwc_otg_pcd_t *pcd = ep->pcd;
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
++
++	if (pcd->ep0_pending && list_empty(&ep->queue)) {
++		if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++			do_setup_out_status_phase(pcd);
++		}
++		else {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++			do_setup_in_status_phase(pcd);
++		}
++		pcd->ep0_pending = 0;
++		return 1;
++	}
++
++	if (list_empty(&ep->queue)) {
++		return 0;
++	}
++	req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
++
++
++	if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++		is_last = 1;
++	}
++	else if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++		if(core_if->dma_desc_enable != 0)
++			desc_sts.d32 = readl(dev_if->in_desc_addr);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++				ep->ep.name, ep->dwc_ep.xfer_len,
++				deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++		if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
++			((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
++			req->req.actual = ep->dwc_ep.xfer_count;
++			/* Is a Zero Len Packet needed? */
++			if (req->req.zero) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++			    req->req.zero = 0;
++			}
++			do_setup_out_status_phase(pcd);
++		}
++	}
++	else {
++		/* ep0-OUT */
++#ifdef DEBUG_EP0
++		deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++		DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
++				ep->ep.name, ep->dwc_ep.xfer_len,
++				deptsiz.b.xfersize,
++				deptsiz.b.pktcnt);
++#endif
++		req->req.actual = ep->dwc_ep.xfer_count;
++		/* Is a Zero Len Packet needed? */
++		if (req->req.zero) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++    			req->req.zero = 0;
++		}
++		if(core_if->dma_desc_enable == 0)
++			do_setup_in_status_phase(pcd);
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		dwc_otg_request_done(ep, req, 0);
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++		return 1;
++	}
++	return 0;
++}
++
++inline void aligned_buf_patch_on_buf_dma_oep_completion(dwc_otg_pcd_ep_t *ep, uint32_t byte_count)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	if(byte_count && dwc_ep->aligned_buf &&
++		dwc_ep->dma_addr>=dwc_ep->aligned_dma_addr &&
++		dwc_ep->dma_addr<=(dwc_ep->aligned_dma_addr+dwc_ep->aligned_buf_size))\
++	{
++		//aligned buf used, apply complete patch
++		u32 offset=(dwc_ep->dma_addr-dwc_ep->aligned_dma_addr);
++		memcpy(dwc_ep->start_xfer_buff+offset, dwc_ep->aligned_buf+offset, byte_count);
++	}
++}
++
++/**
++ * This function completes the request for the EP.	If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	dev_if->in_ep_regs[ep->dwc_ep.num];
++	deptsiz_data_t deptsiz;
++	desc_sts_data_t desc_sts;
++	dwc_otg_pcd_request_t *req = 0;
++	dwc_otg_dma_desc_t* dma_desc;
++	uint32_t byte_count = 0;
++	int is_last = 0;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
++					(ep->dwc_ep.is_in?"IN":"OUT"));
++
++	/* Get any pending requests */
++	if (!list_empty(&ep->queue)) {
++		req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++				 queue);
++		if (!req) {
++			printk("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++	}
++	else {
++		printk("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++	if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++
++		if (core_if->dma_enable) {
++			//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
++			if(core_if->dma_desc_enable == 0) {
++				//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_NONE);
++				if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++					byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++DWC_DEBUGPL(DBG_PCDV,"byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x)\n", byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count );
++
++					ep->dwc_ep.xfer_buff += byte_count;
++					ep->dwc_ep.dma_addr += byte_count;
++					ep->dwc_ep.xfer_count += byte_count;
++
++					DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++							ep->ep.name, ep->dwc_ep.xfer_len,
++							deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++					if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++						//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
++					} else if(ep->dwc_ep.sent_zlp) {
++						/*
++						 * This fragment of code should initiate 0
++						 * length trasfer in case if it is queued
++						 * a trasfer with size divisible to EPs max
++						 * packet size and with usb_request zero field
++						 * is set, which means that after data is transfered,
++						 * it is also should be transfered
++						 * a 0 length packet at the end. For Slave and
++						 * Buffer DMA modes in this case SW has
++						 * to initiate 2 transfers one with transfer size,
++						 * and the second with 0 size. For Desriptor
++						 * DMA mode SW is able to initiate a transfer,
++						 * which will handle all the packets including
++						 * the last  0 legth.
++						 */
++						ep->dwc_ep.sent_zlp = 0;
++						dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++							 ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++							 deptsiz.b.xfersize, deptsiz.b.pktcnt);
++				}
++			} else {
++
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++					desc_sts.d32 = readl(dma_desc);
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++
++				if(byte_count == 0) {
++					ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
++					is_last = 1;
++				} else {
++					DWC_WARN("Incomplete transfer\n");
++				}
++			}
++		} else {
++			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++				/* 	Check if the whole transfer was completed,
++				 * 	if no, setup transfer for next portion of data
++				 */
++			DWC_DEBUGPL(DBG_PCDV, "%s len=%d  xfersize=%d pktcnt=%d\n",
++					ep->ep.name, ep->dwc_ep.xfer_len,
++					deptsiz.b.xfersize, deptsiz.b.pktcnt);
++				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
++				} else if(ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++			else {
++				DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++						ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++						deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++				dev_if->out_ep_regs[ep->dwc_ep.num];
++		desc_sts.d32 = 0;
++		if(core_if->dma_enable) {
++			//dma_unmap_single(NULL,ep->dwc_ep.dma_addr,ep->dwc_ep.xfer_count,DMA_FROM_DEVICE);
++			if(core_if->dma_desc_enable) {
++				DWC_WARN("\n\n%s: we need a cache invalidation here!!\n\n",__func__);
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++				for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++					desc_sts.d32 = readl(dma_desc);
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++
++				ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
++						- byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
++
++				//todo: invalidate cache & aligned buf patch on completion
++				//
++
++				is_last = 1;
++			} else {
++				deptsiz.d32 = 0;
++				deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++
++				byte_count = (ep->dwc_ep.xfer_len -
++							 ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
++
++//				dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
++
++DWC_DEBUGPL(DBG_PCDV,"ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
++				//todo: invalidate cache & aligned buf patch on completion
++				dma_sync_single_for_device(NULL,ep->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
++				aligned_buf_patch_on_buf_dma_oep_completion(ep,byte_count);
++
++				ep->dwc_ep.xfer_buff += byte_count;
++				ep->dwc_ep.dma_addr += byte_count;
++				ep->dwc_ep.xfer_count += byte_count;
++
++				/* 	Check if the whole transfer was completed,
++				 * 	if no, setup transfer for next portion of data
++				 */
++				if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, byte_count(%.8x) = (ep->dwc_ep.xfer_len(%.8x) - ep->dwc_ep.xfer_count(%.8x) - deptsiz.b.xfersize(%.8x)\n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, byte_count ,ep->dwc_ep.xfer_len , ep->dwc_ep.xfer_count , deptsiz.b.xfersize);
++				}
++				else if(ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++		} else {
++			/* 	Check if the whole transfer was completed,
++			 * 	if no, setup transfer for next portion of data
++			 */
++			if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++				//dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++printk("Warning: transfer ended, but specified len is not accomplished!! ep->total_len=%.x,ep->dwc_ep.sent_zlp=%d, ep->dwc_ep.xfer_len(%.8x) \n", ep->dwc_ep.total_len, ep->dwc_ep.sent_zlp, ep->dwc_ep.xfer_len );
++			}
++			else if(ep->dwc_ep.sent_zlp) {
++				/*
++				 * This fragment of code should initiate 0
++				 * length trasfer in case if it is queued
++				 * a trasfer with size divisible to EPs max
++				 * packet size and with usb_request zero field
++				 * is set, which means that after data is transfered,
++				 * it is also should be transfered
++				 * a 0 length packet at the end. For Slave and
++				 * Buffer DMA modes in this case SW has
++				 * to initiate 2 transfers one with transfer size,
++				 * and the second with 0 size. For Desriptor
++				 * DMA mode SW is able to initiate a transfer,
++				 * which will handle all the packets including
++				 * the last  0 legth.
++				 */
++				ep->dwc_ep.sent_zlp = 0;
++				dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++			} else {
++				is_last = 1;
++			}
++		}
++
++#ifdef DEBUG
++
++		DWC_DEBUGPL(DBG_PCDV, "addr %p,	 %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++				&out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
++				ep->dwc_ep.xfer_count,
++				deptsiz.b.xfersize,
++				deptsiz.b.pktcnt);
++#endif
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		req->req.actual = ep->dwc_ep.xfer_count;
++
++		dwc_otg_request_done(ep, req, 0);
++
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++
++		/* If there is a request in the queue start it.*/
++		start_next_request(ep);
++	}
++}
++
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_ep_t		*dwc_ep = &ep->dwc_ep;
++	volatile uint32_t	*addr;
++	depctl_data_t		depctl = {.d32 = 0};
++	dwc_otg_pcd_t		*pcd = ep->pcd;
++	dwc_otg_dma_desc_t	*dma_desc;
++	int	i;
++
++	dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++	if(dwc_ep->is_in) {
++		desc_sts_data_t	sts = {.d32 = 0};
++		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++		{
++			sts.d32 = readl(&dma_desc->status);
++			sts.b_iso_in.bs = BS_HOST_READY;
++			writel(sts.d32,&dma_desc->status);
++		}
++	}
++	else {
++		desc_sts_data_t	sts = {.d32 = 0};
++		for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++		{
++			sts.d32 = readl(&dma_desc->status);
++			sts.b_iso_out.bs = BS_HOST_READY;
++			writel(sts.d32,&dma_desc->status);
++		}
++	}
++
++	if(dwc_ep->is_in == 0){
++		addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	}
++	else{
++		addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	dwc_modify_reg32(addr,depctl.d32,depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++	deptsiz_data_t		deptsiz = { .d32 = 0 };
++	dma_addr_t		dma_addr;
++	uint32_t		offset;
++
++	if(ep->proc_buf_num)
++		dma_addr = ep->dma_addr1;
++	else
++		dma_addr = ep->dma_addr0;
++
++	if(ep->is_in) {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++		offset = ep->data_per_frame;
++	} else {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++		offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++	}
++
++	if(!deptsiz.b.xfersize) {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = 0;
++	} else {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = -ENODATA;
++	}
++	ep->cur_pkt_addr += offset;
++	ep->cur_pkt_dma_addr += offset;
++	ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++	dwc_otg_dma_desc_t* dma_desc;
++	desc_sts_data_t sts = {.d32 = 0};
++	iso_pkt_info_t *iso_packet;
++	uint32_t data_per_desc;
++	uint32_t offset;
++ 	int i, j;
++
++	iso_packet = dwc_ep->pkt_info;
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++		offset = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++				sts.d32 = readl(&dma_desc->status);
++
++				/* Write status in iso_packet_decsriptor  */
++				iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++				if(iso_packet->status) {
++					iso_packet->status = -ENODATA;
++				}
++
++				/* Received data length */
++				if(!sts.b_iso_out.rxbytes){
++					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
++				} else {
++					iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
++								(4 - dwc_ep->data_per_frame % 4);
++				}
++
++				iso_packet->offset = offset;
++
++				offset += data_per_desc;
++				dma_desc ++;
++				iso_packet ++;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++			sts.d32 = readl(&dma_desc->status);
++
++			/* Write status in iso_packet_decsriptor  */
++			iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++			if(iso_packet->status) {
++				iso_packet->status = -ENODATA;
++			}
++
++			/* Received data length */
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++			iso_packet->offset = offset;
++
++			offset += data_per_desc;
++			iso_packet++;
++			dma_desc++;
++		}
++
++		sts.d32 = readl(&dma_desc->status);
++
++		/* Write status in iso_packet_decsriptor  */
++		iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++		if(iso_packet->status) {
++			iso_packet->status = -ENODATA;
++		}
++		/* Received data length */
++		if(!sts.b_iso_out.rxbytes){
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++		} else {
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++							(4 - dwc_ep->data_per_frame % 4);
++		}
++
++		iso_packet->offset = offset;
++	}
++	else /** ISO IN EP */
++	{
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			sts.d32 = readl(&dma_desc->status);
++
++			/* Write status in iso packet descriptor */
++			iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++			if(iso_packet->status != 0) {
++				iso_packet->status = -ENODATA;
++
++			}
++			/* Bytes has been transfered */
++			iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++			dma_desc ++;
++			iso_packet++;
++		}
++
++		sts.d32 = readl(&dma_desc->status);
++		while(sts.b_iso_in.bs == BS_DMA_BUSY) {
++			sts.d32 = readl(&dma_desc->status);
++		}
++
++		/* Write status in iso packet descriptor ??? do be done with ERROR codes*/
++		iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++		if(iso_packet->status != 0) {
++			iso_packet->status = -ENODATA;
++		}
++
++		/* Bytes has been transfered */
++		iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++	}
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++ 	int i, j;
++	dwc_otg_dma_desc_t* dma_desc;
++	dma_addr_t dma_ad;
++	volatile uint32_t	*addr;
++	desc_sts_data_t sts = { .d32 =0 };
++	uint32_t data_per_desc;
++
++	if(dwc_ep->is_in == 0) {
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	}
++	else {
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++
++
++	if(dwc_ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++	}
++	else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = dwc_ep->dma_addr1;
++	}
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if(dwc_ep->is_in == 0) {
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++		{
++			for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++			{
++				data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++					dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				writel((uint32_t)dma_ad, &dma_desc->buf);
++				writel(sts.d32, &dma_desc->status);
++
++				//(uint32_t)dma_ad += data_per_desc;
++				dma_ad = (uint32_t)dma_ad + data_per_desc;
++				dma_desc ++;
++			}
++		}
++
++		for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++		{
++
++			data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++				dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			dma_desc++;
++			//(uint32_t)dma_ad += data_per_desc;
++			dma_ad = (uint32_t)dma_ad + data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++		data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++			dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++	}
++	else /** ISO IN EP */
++	{
++		dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++		sts.b_iso_in.framenum = dwc_ep->next_frame;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++		{
++			writel((uint32_t)dma_ad, &dma_desc->buf);
++			writel(sts.d32, &dma_desc->status);
++
++			sts.b_iso_in.framenum  += dwc_ep->bInterval;
++			//(uint32_t)dma_ad += dwc_ep->data_per_frame;
++			dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
++			dma_desc ++;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++		writel((uint32_t)dma_ad, &dma_desc->buf);
++		writel(sts.d32, &dma_desc->status);
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++	}
++	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++	uint32_t dma_addr;
++	uint32_t drp_pkt;
++	uint32_t drp_pkt_cnt;
++	deptsiz_data_t deptsiz = { .d32 = 0 };
++	depctl_data_t depctl  = { .d32 = 0 };
++	int i;
++
++	deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++
++	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++	/* Setting dropped packets status */
++	for(i = 0; i < drp_pkt_cnt; ++i) {
++		dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
++		drp_pkt ++;
++		deptsiz.b.pktcnt--;
++	}
++
++
++	if(deptsiz.b.pktcnt > 0) {
++		deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++	} else {
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 0;
++	}
++
++	dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
++
++	if(deptsiz.b.pktcnt > 0) {
++		if(dwc_ep->proc_buf_num) {
++			dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
++		} else {
++			dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
++		}
++
++		VERIFY_PCD_DMA_ADDR(dma_addr);
++		dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++		/** Re-enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
++				depctl.d32,depctl.d32);
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ 	int i, j;
++	dma_addr_t dma_ad;
++	iso_pkt_info_t *packet_info = ep->pkt_info;
++	uint32_t offset;
++	uint32_t frame_data;
++	deptsiz_data_t deptsiz;
++
++	if(ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = ep->dma_addr0;
++	}
++	else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = ep->dma_addr1;
++	}
++
++	if(ep->is_in) {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++	} else {
++		deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++	}
++
++	if(!deptsiz.b.xfersize) {
++		offset = 0;
++		for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
++		{
++			frame_data = ep->data_per_frame;
++			for(j = 0; j < ep->pkt_per_frm; ++j) {
++
++				/* Packet status - is not set as initially
++				 * it is set to 0 and if packet was sent
++				 successfully, status field will remain 0*/
++
++				/* Bytes has been transfered */
++				packet_info->length = (ep->maxpacket < frame_data) ?
++							ep->maxpacket : frame_data;
++
++				/* Received packet offset */
++				packet_info->offset = offset;
++				offset += packet_info->length;
++				frame_data -= packet_info->length;
++
++				packet_info ++;
++			}
++		}
++		return 1;
++	} else {
++		/* This is a workaround for in case of Transfer Complete with
++		 * PktDrpSts interrupts	merging - in this case Transfer complete
++		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++		 * set and with DOEPTSIZ register non zero. Investigations showed,
++		 * that this happens when Out packet is dropped, but because of
++		 * interrupts merging during first interrupt handling PktDrpSts
++		 * bit is cleared and for next merged interrupts it is not reset.
++		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++		 */
++		if(ep->is_in) {
++			return 1;
++		} else {
++			return handle_iso_out_pkt_dropped(core_if, ep);
++		}
++	}
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	uint8_t is_last = 0;
++
++	if(core_if->dma_enable) {
++		if(core_if->dma_desc_enable) {
++			set_ddma_iso_pkts_info(core_if, dwc_ep);
++			reinit_ddma_iso_xfer(core_if, dwc_ep);
++			is_last = 1;
++		} else {
++			if(core_if->pti_enh_enable) {
++				if(set_iso_pkts_info(core_if, dwc_ep)) {
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
++					is_last = 1;
++				}
++			} else {
++				set_current_pkt_info(core_if, dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					is_last = 1;
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++				}
++				dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++			}
++		}
++	} else {
++		set_current_pkt_info(core_if, dwc_ep);
++		if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++			is_last = 1;
++			dwc_ep->cur_pkt = 0;
++			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++			if(dwc_ep->proc_buf_num) {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++			} else {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++			}
++		}
++		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++	}
++	if(is_last)
++		dwc_otg_iso_buffer_done(ep, ep->iso_req);
++}
++
++#endif  //DWC_EN_ISOC
++
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control tranfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	desc_sts_data_t desc_sts;
++	deptsiz0_data_t deptsiz;
++	uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++	print_ep0_state(pcd);
++#endif
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		break;
++
++	case EP0_IDLE:
++		pcd->request_config = 0;
++
++		pcd_setup(pcd);
++		break;
++
++	case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++		if (core_if->dma_enable != 0) {
++			/*
++			 * For EP0 we can only program 1 packet at a time so we
++			 * need to do the make calculations after each complete.
++			 * Call write_packet to make the calculations, as in
++			 * slave mode, and use those values to determine if we
++			 * can complete.
++			 */
++			if(core_if->dma_desc_enable == 0) {
++				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
++				byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++			}
++			else {
++				desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
++				byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++			}
++
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else if(ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++	case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++				ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++				ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++		if (core_if->dma_enable != 0) {
++			if(core_if->dma_desc_enable == 0) {
++				deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
++				byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++
++				//todo: invalidate cache & aligned buf patch on completion
++				dma_sync_single_for_device(NULL,ep0->dwc_ep.dma_addr,byte_count,DMA_FROM_DEVICE);
++				aligned_buf_patch_on_buf_dma_oep_completion(ep0,byte_count);
++			}
++			else {
++				desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
++				byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++
++				//todo: invalidate cache & aligned buf patch on completion
++				//
++
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		}
++		else if(ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++	}
++		else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++
++	case EP0_IN_STATUS_PHASE:
++	case EP0_OUT_STATUS_PHASE:
++		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++				ep0_complete_request(ep0);
++				pcd->ep0state = EP0_IDLE;
++				ep0->stopped = 1;
++				ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
++
++		/* Prepare for more SETUP Packets */
++		if(core_if->dma_enable) {
++			ep0_out_start(core_if, pcd);
++		}
++		break;
++
++	case EP0_STALL:
++		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++		break;
++	}
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++}
++
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if;
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t dieptsiz = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++	if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		return;
++	}
++#endif /* DWC_EN_ISOC  */
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++			" stopped=%d\n", ep->dwc_ep.xfer_buff,
++			ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++			ep->stopped);
++	/*
++	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++	 */
++	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++		 ep->dwc_ep.start_xfer_buff != 0) {
++		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		else {
++			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++			/* convert packet size to dwords. */
++			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		ep->stopped = 0;
++		DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
++					"xfer_len=%0x stopped=%d\n",
++					ep->dwc_ep.xfer_buff,
++					ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++					ep->stopped
++					);
++		if (epnum == 0) {
++			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++		}
++		else {
++			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++		}
++	}
++}
++
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
++						 const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz_data_t dieptsiz = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_in_ep(pcd, epnum);
++	dwc_ep = &ep->dwc_ep;
++
++	if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
++			dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++			dieptsiz.b.pktcnt,
++			dieptsiz.b.xfersize);
++
++	if (ep->stopped) {
++		/* Flush the Tx FIFO */
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		/* Clear the Global IN NP NAK */
++		dctl.d32 = 0;
++		dctl.b.cgnpinnak = 1;
++		dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++					 dctl.d32, 0);
++		/* Restart the transaction */
++		if (dieptsiz.b.pktcnt != 0 ||
++			dieptsiz.b.xfersize != 0) {
++			restart_transfer(pcd, epnum);
++		}
++	}
++	else {
++		/* Restart the transaction */
++		if (dieptsiz.b.pktcnt != 0 ||
++			dieptsiz.b.xfersize != 0) {
++			restart_transfer(pcd, epnum);
++		}
++		DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++	}
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++	deptsiz_data_t dieptsiz = {.d32=0};
++	uint32_t num = 0;
++#endif
++	dctl_data_t dctl = {.d32=0};
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++	ep = get_in_ep(pcd, epnum);
++
++	/* Disable the NP Tx Fifo Empty Interrrupt */
++	if (!core_if->dma_enable) {
++		intr_mask.b.nptxfempty = 1;
++		dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++	}
++	/** @todo NGS Check EP type.
++	 * Implement for Periodic EPs */
++	/*
++	 * Non-periodic EP
++	 */
++	/* Enable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++					  0, intr_mask.d32);
++
++	/* Set Global IN NAK */
++	dctl.b.sgnpinnak = 1;
++	dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++					 dctl.d32, dctl.d32);
++
++	ep->stopped = 1;
++
++#ifdef DEBUG
++	dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++			dieptsiz.b.pktcnt,
++			dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++	/*
++	 * Set the NAK bit for this EP to
++	 * start the disable process.
++	 */
++	diepctl.d32 = 0;
++	diepctl.b.snak = 1;
++	dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
++	ep->disabling = 1;
++	ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	diepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++ 	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.babble = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
++						const uint32_t epnum)
++{
++        /** @todo implement ISR */
++        dwc_otg_core_if_t* core_if;
++	doepmsk_data_t intr_mask = { .d32 = 0};
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nyet = 1;
++
++	if(core_if->multiproc_int_enable) {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++					  intr_mask.d32, 0);
++	} else {
++		dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++					  intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each IN EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Time-out Handshake" log error
++ * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
++ *		FIFO.
++ * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
++ *		Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		diepint_data_t diepint = {.d32=0}; \
++		diepint.b.__intr = 1; \
++		dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++		diepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	diepint_data_t diepint = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	depctl_data_t depctl = {.d32=0};
++	uint32_t ep_intr;
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t intr_mask = {.d32 = 0};
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++	/* Service the Device IN interrupts for each endpoint */
++	while(ep_intr) {
++		if (ep_intr&0x1) {
++			uint32_t empty_msk;
++			/* Get EP pointer */
++			ep = get_in_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++			empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++
++			DWC_DEBUGPL(DBG_PCDV,
++					"IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
++					epnum,
++					empty_msk,
++					depctl.d32);
++
++			DWC_DEBUGPL(DBG_PCD,
++					"EP%d-%s: type=%d, mps=%d\n",
++					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++					dwc_ep->type, dwc_ep->maxpacket);
++
++			diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++			DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
++			/* Transfer complete */
++			if (diepint.b.xfercompl) {
++				/* Disable the NP Tx FIFO Empty
++				 * Interrrupt */
++					if(core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++				}
++				else {
++					/* Disable the Tx FIFO Empty Interrupt for this EP */
++					uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
++					dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++					fifoemptymsk, 0);
++				}
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
++
++				/* Complete the transfer */
++				if (epnum == 0) {
++					handle_ep0(pcd);
++				}
++#ifdef DWC_EN_ISOC
++				else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if(!ep->stopped)
++						complete_iso_ep(ep);
++				}
++#endif //DWC_EN_ISOC
++				else {
++
++					complete_ep(ep);
++				}
++			}
++			/* Endpoint disable	 */
++			if (diepint.b.epdisabled) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
++				handle_in_ep_disable_intr(pcd, epnum);
++
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
++			}
++			/* AHB Error */
++			if (diepint.b.ahberr) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
++			}
++			/* TimeOUT Handshake (non-ISOC IN EPs) */
++			if (diepint.b.timeout) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
++				handle_in_ep_timeout_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,timeout);
++			}
++			/** IN Token received with TxF Empty */
++			if (diepint.b.intktxfemp) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
++								epnum);
++				if (!ep->stopped && epnum != 0) {
++
++					diepmsk_data_t diepmsk = { .d32 = 0};
++					diepmsk.b.intktxfemp = 1;
++
++					if(core_if->multiproc_int_enable) {
++						dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
++							diepmsk.d32, 0);
++					} else {
++						dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
++					}
++					start_next_request(ep);
++				}
++				else if(core_if->dma_desc_enable && epnum == 0 &&
++						pcd->ep0state == EP0_OUT_STATUS_PHASE) {
++					// EP0 IN set STALL
++					depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++					/* set the disable and stall bits */
++					if (depctl.b.epena) {
++						depctl.b.epdis = 1;
++					}
++					depctl.b.stall = 1;
++					dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
++			}
++			/** IN Token Received with EP mismatch */
++			if (diepint.b.intknepmis) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
++				CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
++			}
++			/** IN Endpoint NAK Effective */
++			if (diepint.b.inepnakeff) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
++				/* Periodic EP */
++				if (ep->disabling) {
++					depctl.d32 = 0;
++					depctl.b.snak = 1;
++					depctl.b.epdis = 1;
++					dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
++
++			}
++
++			/** IN EP Tx FIFO Empty Intr */
++			if (diepint.b.emptyintr) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
++				write_empty_tx_fifo(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
++			}
++
++			/** IN EP BNA Intr */
++			if (diepint.b.bna) {
++				CLEAR_IN_EP_INTR(core_if,epnum,bna);
++				if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if(dwc_ep->next_frame != 0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					}
++					else
++#endif //DWC_EN_ISOC
++					{
++						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++						/* If Global Continue on BNA is disabled - disable EP */
++						if(!dctl.b.gcontbna) 						{
++							depctl.d32 = 0;
++							depctl.b.snak = 1;
++							depctl.b.epdis = 1;
++							dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++						} else {
++							start_next_request(ep);
++						}
++					}
++				}
++			}
++			/* NAK Interrutp */
++			if (diepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
++				handle_in_ep_nak_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if,epnum,nak);
++			}
++		}
++		epnum++;
++		ep_intr >>=1;
++	}
++
++	return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each OUT EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
++ *		Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		doepint_data_t doepint = {.d32=0}; \
++		doepint.b.__intr = 1; \
++		dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++		doepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t ep_intr;
++	doepint_data_t doepint = {.d32=0};
++	dctl_data_t dctl = {.d32=0};
++	depctl_data_t doepctl = {.d32=0};
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++	while(ep_intr) {
++		if (ep_intr&0x1) {
++			/* Get EP pointer */
++			ep = get_out_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++			DWC_DEBUGPL(DBG_PCDV,
++					"EP%d-%s: type=%d, mps=%d\n",
++					dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++					dwc_ep->type, dwc_ep->maxpacket);
++#endif
++			doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++
++			/* Transfer complete */
++			if (doepint.b.xfercompl) {
++				if (epnum == 0) {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++					if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
++						handle_ep0(pcd);
++#ifdef DWC_EN_ISOC
++				} else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (doepint.b.pktdrpsts == 0) {
++						/* Clear the bit in DOEPINTn for this interrupt */
++						CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++						complete_iso_ep(ep);
++					} else {
++						doepint_data_t doepint = {.d32=0};
++						doepint.b.xfercompl = 1;
++						doepint.b.pktdrpsts = 1;
++						dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
++							doepint.d32);
++						if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
++							complete_iso_ep(ep);
++						}
++					}
++#endif //DWC_EN_ISOC
++				} else {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++					complete_ep(ep);
++				}
++
++			}
++
++			/* Endpoint disable	 */
++			if (doepint.b.epdisabled) {
++				/* Clear the bit in DOEPINTn for this interrupt */
++				CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
++			}
++			/* AHB Error */
++			if (doepint.b.ahberr) {
++				DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
++				DWC_DEBUGPL(DBG_PCD,"EP DMA REG	 %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
++				CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
++			}
++			/* Setup Phase Done (contorl EPs) */
++			if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
++							epnum);
++#endif
++				CLEAR_OUT_EP_INTR(core_if,epnum,setup);
++				handle_ep0(pcd);
++			}
++
++			/** OUT EP BNA Intr */
++			if (doepint.b.bna) {
++				CLEAR_OUT_EP_INTR(core_if,epnum,bna);
++				if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if(dwc_ep->next_frame != 0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					}
++					else
++#endif //DWC_EN_ISOC
++					{
++						dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++						/* If Global Continue on BNA is disabled - disable EP*/
++						if(!dctl.b.gcontbna) {
++							doepctl.d32 = 0;
++							doepctl.b.snak = 1;
++							doepctl.b.epdis = 1;
++							dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
++						} else {
++							start_next_request(ep);
++						}
++					}
++				}
++			}
++			if (doepint.b.stsphsercvd) {
++				CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
++				if(core_if->dma_desc_enable) {
++					do_setup_in_status_phase(pcd);
++				}
++			}
++			/* Babble Interrutp */
++			if (doepint.b.babble) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
++				handle_out_ep_babble_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,babble);
++			}
++			/* NAK Interrutp */
++			if (doepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
++				handle_out_ep_nak_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,nak);
++			}
++			/* NYET Interrutp */
++			if (doepint.b.nyet) {
++				DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
++				handle_out_ep_nyet_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
++			}
++		}
++
++		epnum++;
++		ep_intr >>=1;
++	}
++
++	return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++
++
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
++ *		Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
++{
++	gintsts_data_t 		gintsts;
++
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t 	*dev_if;
++	deptsiz_data_t 		deptsiz = { .d32 = 0};
++	depctl_data_t		depctl = { .d32 = 0};
++	dsts_data_t		dsts = { .d32 = 0};
++	dwc_ep_t		*dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for(i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if(dwc_ep->active &&
++			dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
++		{
++			deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++
++			if(depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++				}
++
++				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++			}
++		}
++	}
++
++#else
++        gintmsk_data_t intr_mask = { .d32 = 0};
++        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++                          "IN ISOC Incomplete");
++
++        intr_mask.b.incomplisoin = 1;
++        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++                                intr_mask.d32, 0);
++#endif //DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoin = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet.	The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Read any data from the FIFO
++ *	-#	Disable EP.	 when "Endpoint Disabled" interrupt is received
++ *		re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
++{
++	/* @todo implement ISR */
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t 	*dev_if;
++	deptsiz_data_t 		deptsiz = { .d32 = 0};
++	depctl_data_t		depctl = { .d32 = 0};
++	dsts_data_t		dsts = { .d32 = 0};
++	dwc_ep_t		*dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for(i = 1; i <= dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if(pcd->out_ep[i].dwc_ep.active &&
++			pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
++		{
++			deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
++			depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++
++			if(depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
++				if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if(dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++					}
++				}
++
++				dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++			}
++		}
++	}
++#else
++        /** @todo implement ISR */
++        gintmsk_data_t intr_mask = { .d32 = 0};
++
++        DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++                          "OUT ISOC Incomplete");
++
++        intr_mask.b.incomplisoout = 1;
++        dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++                                intr_mask.d32, 0);
++
++#endif // DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoout = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++				gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	depctl_data_t diepctl = { .d32 = 0};
++	depctl_data_t diepctl_rd = { .d32 = 0};
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++	/* Disable all active IN EPs */
++	diepctl.b.epdis = 1;
++	diepctl.b.snak = 1;
++
++	for (i=0; i <= dev_if->num_in_eps; i++)
++	{
++		diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++		if (diepctl_rd.b.epena) {
++			dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
++						diepctl.d32);
++		}
++	}
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.ginnakeff = 1;
++	dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
++{
++	gintmsk_data_t intr_mask = { .d32 = 0};
++	gintsts_data_t gintsts;
++
++	DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++			  "Global IN NAK Effective\n");
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.goutnakeff = 1;
++	dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++					  intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.goutnakeff = 1;
++	dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++						 gintsts.d32);
++
++	return 1;
++}
++
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++	dwc_otg_core_global_regs_t *global_regs =
++			core_if->core_global_regs;
++#endif
++	gintsts_data_t gintr_status;
++	int32_t retval = 0;
++
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
++				__func__,
++				dwc_read_reg32(&global_regs->gintsts),
++				dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		SPIN_LOCK(&pcd->lock);
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
++						__func__,
++						dwc_read_reg32(&global_regs->gintsts),
++						dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++/*
++		if (!gintr_status.d32) {
++			SPIN_UNLOCK(&pcd->lock);
++			return 0;
++		}
++*/
++		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++					__func__, gintr_status.d32);
++
++		if (gintr_status.b.sofintr) {
++			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++		}
++		if (gintr_status.b.rxstsqlvl) {
++			retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++		}
++		if (gintr_status.b.nptxfempty) {
++			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++		}
++		if (gintr_status.b.ginnakeff) {
++			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++		}
++		if (gintr_status.b.goutnakeff) {
++			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++		}
++		if (gintr_status.b.i2cintr) {
++			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++		}
++		if (gintr_status.b.erlysuspend) {
++			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++		}
++		if (gintr_status.b.usbreset) {
++			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++		}
++		if (gintr_status.b.enumdone) {
++			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++		}
++		if (gintr_status.b.isooutdrop) {
++			retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
++		}
++		if (gintr_status.b.eopframe) {
++			retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++		}
++		if (gintr_status.b.epmismatch) {
++			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
++		}
++		if (gintr_status.b.inepint) {
++			if(!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.outepintr) {
++			if(!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.incomplisoin) {
++			retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++		}
++		if (gintr_status.b.incomplisoout) {
++			retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++		}
++
++		/* In MPI mode De vice Endpoints intterrupts are asserted
++		 * without setting outepintr and inepint bits set, so these
++		 * Interrupt handlers are called without checking these bit-fields
++		 */
++		if(core_if->multiproc_int_enable) {
++			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++		}
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++						dwc_read_reg32(&global_regs->gintsts));
++#endif
++		SPIN_UNLOCK(&pcd->lock);
++	}
++	S3C2410X_CLEAR_EINTPEND();
++
++	return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+--- /dev/null
++++ b/drivers/usb/dwc/otg_plat.h
+@@ -0,0 +1,266 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
++ * $Revision: #23 $
++ * $Date: 2008/07/15 $
++ * $Change: 1064915 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/* Changed all readl and writel to __raw_readl, __raw_writel */
++
++/**
++ * @file
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++//#if !defined(__LINUX_ARM_ARCH__)
++//#error "The contents of this file is Linux specific!!!"
++//#endif
++
++/**
++ * Reads the content of a register.
++ *
++ * @param reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
++{
++		  return __raw_readl(reg);
++     //   return readl(reg);
++};
++
++/**
++ * Writes a register with a 32 bit value.
++ *
++ * @param reg address of register to read.
++ * @param value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
++{
++     //   writel( value, reg );
++		  __raw_writel(value, reg);
++
++};
++
++/**
++ * This function modifies bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param reg address of register to read.
++ * @param clear_mask bit mask to be cleared.
++ * @param set_mask bit mask to be set.
++ *
++ * Usage:<br>
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ *    dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
++{
++      //  writel( (readl(reg) & ~clear_mask) | set_mask, reg );
++        __raw_writel( (__raw_readl(reg) & ~clear_mask) | set_mask, reg );
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t usecs )
++{
++        udelay( usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t msecs )
++{
++        mdelay( msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *lock )
++{
++        spin_lock(lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock.  On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
++{
++        spin_unlock(lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( l, f )  spin_lock_irqsave(l,f);
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore.  On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
++
++/*
++ * Debugging support vanishes in non-debug builds.
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
++{
++        uint32_t old = g_dbg_lvl;
++        g_dbg_lvl = new;
++        return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ *  Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/dwc/otg_regs.h
+@@ -0,0 +1,2059 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: #72 $
++ * $Date: 2008/09/19 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Transmit FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs
++{
++	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
++	volatile uint32_t gotgctl;
++	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
++	volatile uint32_t gotgint;
++	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
++	volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK		0x0001
++#define DWC_DMAENABLE		0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
++
++	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
++	volatile uint32_t gusbcfg;
++	/**Core Reset Register.	 <i>Offset: 010h</i> */
++	volatile uint32_t grstctl;
++	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
++	volatile uint32_t gintsts;
++	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++	volatile uint32_t gintmsk;
++	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
++	volatile uint32_t grxstsr;
++	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++	volatile uint32_t grxstsp;
++	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
++	volatile uint32_t grxfsiz;
++	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++	volatile uint32_t gnptxfsiz;
++	/**Non Periodic Transmit FIFO/Queue Status Register (Read
++	 * Only). <i>Offset: 02Ch</i> */
++	volatile uint32_t gnptxsts;
++	/**I2C Access Register.	 <i>Offset: 030h</i> */
++	volatile uint32_t gi2cctl;
++	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
++	volatile uint32_t gpvndctl;
++	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++	volatile uint32_t ggpio;
++	/**User ID Register.  <i>Offset: 03Ch</i> */
++	volatile uint32_t guid;
++	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++	volatile uint32_t gsnpsid;
++	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++	volatile uint32_t ghwcfg1;
++	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++	volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE	0
++#define DWC_MODE_SRP_ONLY_CAPABLE	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
++#define DWC_MODE_SRP_CAPABLE_DEVICE		3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
++#define DWC_MODE_SRP_CAPABLE_HOST	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
++
++	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++	volatile uint32_t ghwcfg3;
++	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++	volatile uint32_t ghwcfg4;
++	/** Reserved  <i>Offset: 054h-0FFh</i> */
++	volatile uint32_t reserved[43];
++	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++	volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++	volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned sesreqscs : 1;
++		unsigned sesreq : 1;
++		unsigned reserved2_7 : 6;
++		unsigned hstnegscs : 1;
++		unsigned hnpreq : 1;
++		unsigned hstsethnpen : 1;
++		unsigned devhnpen : 1;
++		unsigned reserved12_15 : 4;
++		unsigned conidsts : 1;
++		unsigned reserved17 : 1;
++		unsigned asesvld : 1;
++		unsigned bsesvld : 1;
++		unsigned currmod : 1;
++		unsigned reserved21_31 : 11;
++	} b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Current Mode */
++		unsigned reserved0_1 : 2;
++
++		/** Session End Detected */
++		unsigned sesenddet : 1;
++
++		unsigned reserved3_7 : 5;
++
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng : 1;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng : 1;
++
++		unsigned reserver10_16 : 7;
++
++		/** Host Negotiation Detected */
++		unsigned hstnegdet : 1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng : 1;
++		/** Debounce Done */
++		unsigned debdone : 1;
++
++		unsigned reserved31_20 : 12;
++
++	} b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG).	Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE		1
++
++		unsigned hburstlen : 4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
++
++		unsigned dmaenable : 1;
++#define DWC_GAHBCFG_DMAENABLE			1
++		unsigned reserved : 1;
++		unsigned nptxfemplvl_txfemplvl : 1;
++		unsigned ptxfemplvl : 1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++		unsigned reserved9_31 : 23;
++	} b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG).	Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned toutcal : 3;
++		unsigned phyif : 1;
++		unsigned ulpi_utmi_sel : 1;
++		unsigned fsintf : 1;
++		unsigned physel : 1;
++		unsigned ddrsel : 1;
++		unsigned srpcap : 1;
++		unsigned hnpcap : 1;
++		unsigned usbtrdtim : 4;
++		unsigned nptxfrwnden : 1;
++		unsigned phylpwrclksel : 1;
++		unsigned otgutmifssel : 1;
++		unsigned ulpi_fsls : 1;
++		unsigned ulpi_auto_res : 1;
++		unsigned ulpi_clk_sus_m : 1;
++		unsigned ulpi_ext_vbus_drv : 1;
++		unsigned ulpi_int_vbus_indicator : 1;
++		unsigned term_sel_dl_pulse : 1;
++		unsigned reserved23_27 : 5;
++		unsigned tx_end_delay : 1;
++		unsigned reserved29_31 : 3;
++	} b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Core Soft Reset (CSftRst) (Device and Host)
++		 *
++		 * The application can flush the control logic in the
++		 * entire core using this bit. This bit resets the
++		 * pipelines in the AHB Clock domain as well as the
++		 * PHY Clock domain.
++		 *
++		 * The state machines are reset to an IDLE state, the
++		 * control bits in the CSRs are cleared, all the
++		 * transmit FIFOs and the receive FIFO are flushed.
++		 *
++		 * The status mask bits that control the generation of
++		 * the interrupt, are cleared, to clear the
++		 * interrupt. The interrupt status bits are not
++		 * cleared, so the application can get the status of
++		 * any events that occurred in the core after it has
++		 * set this bit.
++		 *
++		 * Any transactions on the AHB are terminated as soon
++		 * as possible following the protocol. Any
++		 * transactions on the USB are terminated immediately.
++		 *
++		 * The configuration settings in the CSRs are
++		 * unchanged, so the software doesn't have to
++		 * reprogram these registers (Device
++		 * Configuration/Host Configuration/Core System
++		 * Configuration/Core PHY Configuration).
++		 *
++		 * The application can write to this bit, any time it
++		 * wants to reset the core. This is a self clearing
++		 * bit and the core clears this bit after all the
++		 * necessary logic is reset in the core, which may
++		 * take several clocks, depending on the current state
++		 * of the core.
++		 */
++		unsigned csftrst : 1;
++		/** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++		unsigned hsftrst : 1;
++		/** Host Frame Counter Reset (Host Only)<br>
++		 *
++		 * The application can reset the (micro)frame number
++		 * counter inside the core, using this bit. When the
++		 * (micro)frame counter is reset, the subsequent SOF
++		 * sent out by the core, will have a (micro)frame
++		 * number of 0.
++		 */
++		unsigned hstfrm : 1;
++		/** In Token Sequence Learning Queue Flush
++		 * (INTknQFlsh) (Device Only)
++		 */
++		unsigned intknqflsh : 1;
++		/** RxFIFO Flush (RxFFlsh) (Device and Host)
++		 *
++		 * The application can flush the entire Receive FIFO
++		 * using this bit.	<p>The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction.	 <p>The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is reading from the RxFIFO nor the MAC
++		 * is writing the data in to the FIFO.	<p>The
++		 * application should wait until the bit is cleared
++		 * before performing any other operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned rxfflsh : 1;
++		/** TxFIFO Flush (TxFFlsh) (Device and Host).
++		 *
++		 * This bit is used to selectively flush a single or
++		 * all transmit FIFOs.	The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction.	 <p>The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is writing into the TxFIFO nor the MAC
++		 * is reading the data out of the FIFO.	 <p>The
++		 * application should wait until the core clears this
++		 * bit, before performing any operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned txfflsh : 1;
++		/** TxFIFO Number (TxFNum) (Device and Host).
++		 *
++		 * This is the FIFO number which needs to be flushed,
++		 * using the TxFIFO Flush bit. This field should not
++		 * be changed until the TxFIFO Flush bit is cleared by
++		 * the core.
++		 *	 - 0x0 : Non Periodic TxFIFO Flush
++		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
++		 *	   or Periodic TxFIFO in host mode
++		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++		 *	 - ...
++		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
++		 *	 - 0x10: Flush all the Transmit NonPeriodic and
++		 *	   Transmit Periodic FIFOs in the core
++		 */
++		unsigned txfnum : 5;
++		/** Reserved */
++		unsigned reserved11_29 : 19;
++		/** DMA Request Signal.	 Indicated DMA request is in
++		 * probress.  Used for debug purpose. */
++		unsigned dmareq : 1;
++		/** AHB Master Idle.  Indicates the AHB Master State
++		 * Machine is in IDLE condition. */
++		unsigned ahbidle : 1;
++	} b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK).	Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned reserved0 : 1;
++		unsigned modemismatch : 1;
++		unsigned otgintr : 1;
++		unsigned sofintr : 1;
++		unsigned rxstsqlvl : 1;
++		unsigned nptxfempty : 1;
++		unsigned ginnakeff : 1;
++		unsigned goutnakeff : 1;
++		unsigned reserved8 : 1;
++		unsigned i2cintr : 1;
++		unsigned erlysuspend : 1;
++		unsigned usbsuspend : 1;
++		unsigned usbreset : 1;
++		unsigned enumdone : 1;
++		unsigned isooutdrop : 1;
++		unsigned eopframe : 1;
++		unsigned reserved16 : 1;
++		unsigned epmismatch : 1;
++		unsigned inepintr : 1;
++		unsigned outepintr : 1;
++		unsigned incomplisoin : 1;
++		unsigned incomplisoout : 1;
++		unsigned reserved22_23 : 2;
++		unsigned portintr : 1;
++		unsigned hcintr : 1;
++		unsigned ptxfempty : 1;
++		unsigned reserved27 : 1;
++		unsigned conidstschng : 1;
++		unsigned disconnect : 1;
++		unsigned sessreqintr : 1;
++		unsigned wkupintr : 1;
++	} b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++	/** register bits */
++	struct
++	{
++#define DWC_HOST_MODE 1
++		unsigned curmode : 1;
++		unsigned modemismatch : 1;
++		unsigned otgintr : 1;
++		unsigned sofintr : 1;
++		unsigned rxstsqlvl : 1;
++		unsigned nptxfempty : 1;
++		unsigned ginnakeff : 1;
++		unsigned goutnakeff : 1;
++		unsigned reserved8 : 1;
++		unsigned i2cintr : 1;
++		unsigned erlysuspend : 1;
++		unsigned usbsuspend : 1;
++		unsigned usbreset : 1;
++		unsigned enumdone : 1;
++		unsigned isooutdrop : 1;
++		unsigned eopframe : 1;
++		unsigned intokenrx : 1;
++		unsigned epmismatch : 1;
++		unsigned inepint: 1;
++		unsigned outepintr : 1;
++		unsigned incomplisoin : 1;
++		unsigned incomplisoout : 1;
++		unsigned reserved22_23 : 2;
++		unsigned portintr : 1;
++		unsigned hcintr : 1;
++		unsigned ptxfempty : 1;
++		unsigned reserved27 : 1;
++		unsigned conidstschng : 1;
++		unsigned disconnect : 1;
++		unsigned sessreqintr : 1;
++		unsigned wkupintr : 1;
++	} b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned epnum : 4;
++		unsigned bcnt : 11;
++		unsigned dpid : 2;
++#define DWC_STS_DATA_UPDT		0x2				  // OUT Data Packet
++#define DWC_STS_XFER_COMP		0x3				  // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK		0x1				  // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP		0x4				  // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6				  // SETUP Packet
++		unsigned pktsts : 4;
++		unsigned fn : 4;
++		unsigned reserved : 7;
++	} b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned chnum : 4;
++		unsigned bcnt : 11;
++		unsigned dpid : 2;
++		unsigned pktsts : 4;
++#define DWC_GRXSTS_PKTSTS_IN			  0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
++		unsigned reserved : 11;
++	} b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned startaddr : 16;
++		unsigned depth : 16;
++	} b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned nptxfspcavail : 16;
++		unsigned nptxqspcavail : 8;
++		/** Top of the Non-Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (Last entry for the selected
++		 *	  channel/EP)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - IN/OUT
++		 *	  - 2'b01 - Zero Length OUT
++		 *	  - 2'b10 - PING/Complete Split
++		 *	  - 2'b11 - Channel Halt
++		 *	- bits 30:27 - Channel/EP Number
++		 */
++		unsigned nptxqtop_terminate : 1;
++		unsigned nptxqtop_token : 2;
++		unsigned nptxqtop_chnep : 4;
++		unsigned reserved : 1;
++	} b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned txfspcavail : 16;
++		unsigned reserved : 16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned rwdata : 8;
++		unsigned regaddr : 8;
++		unsigned addr : 7;
++		unsigned i2cen : 1;
++		unsigned ack : 1;
++		unsigned i2csuspctl : 1;
++		unsigned i2cdevaddr : 2;
++		unsigned reserved : 2;
++		unsigned rw : 1;
++		unsigned bsydne : 1;
++	} b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ep_dir0 : 2;
++		unsigned ep_dir1 : 2;
++		unsigned ep_dir2 : 2;
++		unsigned ep_dir3 : 2;
++		unsigned ep_dir4 : 2;
++		unsigned ep_dir5 : 2;
++		unsigned ep_dir6 : 2;
++		unsigned ep_dir7 : 2;
++		unsigned ep_dir8 : 2;
++		unsigned ep_dir9 : 2;
++		unsigned ep_dir10 : 2;
++		unsigned ep_dir11 : 2;
++		unsigned ep_dir12 : 2;
++		unsigned ep_dir13 : 2;
++		unsigned ep_dir14 : 2;
++		unsigned ep_dir15 : 2;
++	} b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/* GHWCFG2 */
++		unsigned op_mode : 3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++		unsigned architecture : 2;
++		unsigned point2point : 1;
++		unsigned hs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++		unsigned fs_phy_type : 2;
++		unsigned num_dev_ep : 4;
++		unsigned num_host_chan : 4;
++		unsigned perio_ep_supported : 1;
++		unsigned dynamic_fifo : 1;
++		unsigned multi_proc_int : 1;
++		unsigned reserved21 : 1;
++		unsigned nonperio_tx_q_depth : 2;
++		unsigned host_perio_tx_q_depth : 2;
++		unsigned dev_token_q_depth : 5;
++		unsigned reserved31 : 1;
++	} b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/* GHWCFG3 */
++		unsigned xfer_size_cntr_width : 4;
++		unsigned packet_size_cntr_width : 3;
++		unsigned otg_func : 1;
++		unsigned i2c : 1;
++		unsigned vendor_ctrl_if : 1;
++		unsigned optional_features : 1;
++		unsigned synch_reset_type : 1;
++		unsigned ahb_phy_clock_synch : 1;
++		unsigned reserved15_13 : 3;
++		unsigned dfifo_depth : 16;
++	} b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned num_dev_perio_in_ep : 4;
++		unsigned power_optimiz : 1;
++		unsigned min_ahb_freq : 9;
++		unsigned utmi_phy_data_width : 2;
++		unsigned num_dev_mode_ctrl_ep : 4;
++		unsigned iddig_filt_en : 1;
++		unsigned vbus_valid_filt_en : 1;
++		unsigned a_valid_filt_en : 1;
++		unsigned b_valid_filt_en : 1;
++		unsigned session_end_filt_en : 1;
++		unsigned ded_fifo_en : 1;
++		unsigned num_in_eps : 4;
++		unsigned desc_dma : 1;
++		unsigned desc_dma_dyn : 1;
++	} b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs
++{
++	/** Device Configuration Register. <i>Offset 800h</i> */
++	volatile uint32_t dcfg;
++	/** Device Control Register. <i>Offset: 804h</i> */
++	volatile uint32_t dctl;
++	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
++	volatile uint32_t dsts;
++	/** Reserved. <i>Offset: 80Ch</i> */
++	uint32_t unused;
++	/** Device IN Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 810h</i> */
++	volatile uint32_t diepmsk;
++	/** Device OUT Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 814h</i> */
++	volatile uint32_t doepmsk;
++	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++	volatile uint32_t daint;
++	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++	 * 81Ch</i> */
++	volatile uint32_t daintmsk;
++	/** Device IN Token Queue Read Register-1 (Read Only).
++	 * <i>Offset: 820h</i> */
++	volatile uint32_t dtknqr1;
++	/** Device IN Token Queue Read Register-2 (Read Only).
++	 * <i>Offset: 824h</i> */
++	volatile uint32_t dtknqr2;
++	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
++	volatile uint32_t dvbusdis;
++	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
++	volatile uint32_t dvbuspulse;
++	/** Device IN Token Queue Read Register-3 (Read Only). /
++	 *	Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	volatile uint32_t dtknqr3_dthrctl;
++	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
++	 * <i>Offset: 834h</i> */
++	volatile uint32_t dtknqr4_fifoemptymsk;
++	/** Device Each Endpoint Interrupt Register (Read Only). /
++	 * <i>Offset: 838h</i> */
++	volatile uint32_t deachint;
++	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 83Ch</i> */
++	volatile uint32_t deachintmsk;
++	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 840h</i> */
++	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 880h</i> */
++	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Device Speed */
++		unsigned devspd : 2;
++		/** Non Zero Length Status OUT Handshake */
++		unsigned nzstsouthshk : 1;
++#define DWC_DCFG_SEND_STALL 1
++
++		unsigned reserved3 : 1;
++		/** Device Addresses */
++		unsigned devaddr : 7;
++		/** Periodic Frame Interval */
++		unsigned perfrint : 2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++
++		unsigned reserved13_17 : 5;
++		/** In Endpoint Mis-match count */
++		unsigned epmscnt : 5;
++		/** Enable Descriptor DMA in Device mode */
++		unsigned descdma : 1;
++	} b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Remote Wakeup */
++		unsigned rmtwkupsig : 1;
++		/** Soft Disconnect */
++		unsigned sftdiscon : 1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts : 1;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts : 1;
++		/** Test Control */
++		unsigned tstctl : 3;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak : 1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak : 1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak : 1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak : 1;
++
++		/** Power-On Programming Done */
++		unsigned pwronprgdone : 1;
++		/** Global Continue on BNA */
++		unsigned gcontbna : 1;
++		/** Global Multi Count */
++		unsigned gmc : 2;
++		/** Ignore Frame Number for ISOC EPs */
++		unsigned ifrmnum : 1;
++		/** NAK on Babble */
++		unsigned nakonbble : 1;
++
++		unsigned reserved16_31 : 16;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Suspend Status */
++		unsigned suspsts : 1;
++		/** Enumerated Speed */
++		unsigned enumspd : 2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
++		/** Erratic Error */
++		unsigned errticerr : 1;
++		unsigned reserved4_7: 4;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn : 14;
++		unsigned reserved22_31 : 10;
++	} b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer complete mask */
++		unsigned xfercompl : 1;
++		/** Endpoint disable mask */
++		unsigned epdisabled : 1;
++		/** AHB Error mask */
++		unsigned ahberr : 1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout : 1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp : 1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis : 1;
++		/** IN Endpoint HAK Effective mask */
++		unsigned inepnakeff : 1;
++		/** IN Endpoint HAK Effective mask */
++		unsigned emptyintr : 1;
++		unsigned txfifoundrn : 1;
++
++		/** BNA Interrupt mask */
++		unsigned bna : 1;
++		unsigned reserved10_12 : 3;
++		/** BNA Interrupt mask */
++		unsigned nak : 1;
++		unsigned reserved14_31 : 18;
++		} b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer complete */
++		unsigned xfercompl : 1;
++		/** Endpoint disable  */
++		unsigned epdisabled : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup : 1;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis : 1;
++		unsigned stsphsercvd : 1;
++		/** Back-to-Back SETUP Packets Received */
++		unsigned back2backsetup : 1;
++		unsigned reserved7 : 1;
++		/** OUT packet Error */
++		unsigned outpkterr : 1;
++		/** BNA Interrupt */
++		unsigned bna : 1;
++		unsigned reserved10 : 1;
++		/** Packet Drop Status */
++		unsigned pktdrpsts : 1;
++		/** Babble Interrupt */
++		unsigned babble : 1;
++		/** NAK Interrupt */
++		unsigned nak : 1;
++		/** NYET Interrupt */
++		unsigned nyet : 1;
++
++		unsigned reserved15_31 : 17;
++	} b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** IN Endpoint bits */
++		unsigned in : 16;
++		/** OUT Endpoint bits */
++		unsigned out : 16;
++	} ep;
++	struct
++	{
++		/** IN Endpoint bits */
++		unsigned inep0	: 1;
++		unsigned inep1	: 1;
++		unsigned inep2	: 1;
++		unsigned inep3	: 1;
++		unsigned inep4	: 1;
++		unsigned inep5	: 1;
++		unsigned inep6	: 1;
++		unsigned inep7	: 1;
++		unsigned inep8	: 1;
++		unsigned inep9	: 1;
++		unsigned inep10 : 1;
++		unsigned inep11 : 1;
++		unsigned inep12 : 1;
++		unsigned inep13 : 1;
++		unsigned inep14 : 1;
++		unsigned inep15 : 1;
++		/** OUT Endpoint bits */
++		unsigned outep0	 : 1;
++		unsigned outep1	 : 1;
++		unsigned outep2	 : 1;
++		unsigned outep3	 : 1;
++		unsigned outep4	 : 1;
++		unsigned outep5	 : 1;
++		unsigned outep6	 : 1;
++		unsigned outep7	 : 1;
++		unsigned outep8	 : 1;
++		unsigned outep9	 : 1;
++		unsigned outep10 : 1;
++		unsigned outep11 : 1;
++		unsigned outep12 : 1;
++		unsigned outep13 : 1;
++		unsigned outep14 : 1;
++		unsigned outep15 : 1;
++	} b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** In Token Queue Write Pointer */
++		unsigned intknwptr : 5;
++		/** Reserved */
++		unsigned reserved05_06 : 2;
++		/** write pointer has wrapped. */
++		unsigned wrap_bit : 1;
++		/** EP Numbers of IN Tokens 0 ... 4 */
++		unsigned epnums0_5 : 24;
++	}b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** non ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en : 1;
++		/** ISO Tx Thr. Enable */
++		unsigned iso_thr_en : 1;
++		/** Tx Thr. Length */
++		unsigned tx_thr_len : 9;
++		/** Reserved */
++		unsigned reserved11_15 : 5;
++		/** Rx Thr. Enable */
++		unsigned rx_thr_en : 1;
++		/** Rx Thr. Length */
++		unsigned rx_thr_len : 9;
++		/** Reserved */
++		unsigned reserved26_31 : 6;
++	}b;
++} dthrctl_data_t;
++
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs
++{
++	/** Device IN Endpoint Control Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t diepctl;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t diepint;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device IN Endpoint Transfer Size
++	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t dieptsiz;
++	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 14h</i> */
++	volatile uint32_t diepdma;
++	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 18h</i> */
++	volatile uint32_t dtxfsts;
++	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 1Ch</i> */
++	volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs
++{
++	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t doepctl;
++	/** Device OUT Endpoint Frame number Register.	<i>Offset:
++	 * B00h + (ep_num * 20h) + 04h</i> */
++	volatile uint32_t doepfn;
++	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t doepint;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
++	 * B00h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t doeptsiz;
++	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 14h</i> */
++	volatile uint32_t doepdma;
++	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 1Ch</i> */
++	uint32_t unused;
++	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 1Ch</i> */
++	uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Maximum Packet Size
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *	 2'b00: 64 Bytes
++		 *	 2'b01: 32
++		 *	 2'b10: 16
++		 *	 2'b11: 8 */
++		unsigned mps : 11;
++#define DWC_DEP0CTL_MPS_64	 0
++#define DWC_DEP0CTL_MPS_32	 1
++#define DWC_DEP0CTL_MPS_16	 2
++#define DWC_DEP0CTL_MPS_8	 3
++
++		/** Next Endpoint
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep : 4;
++
++		/** USB Active Endpoint */
++		unsigned usbactep : 1;
++
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++		 * This field contains the PID of the packet going to
++		 * be received or transmitted on this endpoint. The
++		 * application should program the PID of the first
++		 * packet going to be received or transmitted on this
++		 * endpoint , after the endpoint is
++		 * activated. Application use the SetD1PID and
++		 * SetD0PID fields of this register to program either
++		 * D0 or D1 PID.
++		 *
++		 * The encoding for this field is
++		 *	 - 0: D0
++		 *	 - 1: D1
++		 */
++		unsigned dpid : 1;
++
++		/** NAK Status */
++		unsigned naksts : 1;
++
++		/** Endpoint Type
++		 *	2'b00: Control
++		 *	2'b01: Isochronous
++		 *	2'b10: Bulk
++		 *	2'b11: Interrupt */
++		unsigned eptype : 2;
++
++		/** Snoop Mode
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp : 1;
++
++		/** Stall Handshake */
++		unsigned stall : 1;
++
++		/** Tx Fifo Number
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum : 4;
++
++		/** Clear NAK */
++		unsigned cnak : 1;
++		/** Set NAK */
++		unsigned snak : 1;
++		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA0. Set Even
++		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to even (micro)
++		 * frame.
++		 */
++		unsigned setd0pid : 1;
++		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA1 Set Odd
++		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++		 */
++		unsigned setd1pid : 1;
++		/** Endpoint Disable */
++		unsigned epdis : 1;
++		/** Endpoint Enable */
++		unsigned epena : 1;
++		} b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** register bits */
++		struct {
++		/** Transfer size */
++		unsigned xfersize : 19;
++		/** Packet Count */
++		unsigned pktcnt : 10;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc : 2;
++		unsigned reserved : 1;
++		} b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** register bits */
++		struct {
++		/** Transfer size */
++		unsigned xfersize : 7;
++				/** Reserved */
++				unsigned reserved7_18 : 12;
++		/** Packet Count */
++		unsigned pktcnt : 1;
++				/** Reserved */
++		unsigned reserved20_28 : 9;
++				/**Setup Packet Count (DOEPTSIZ0 Only) */
++				unsigned supcnt : 2;
++				unsigned reserved31;
++		} b;
++} deptsiz0_data_t;
++
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY	0x0
++#define BS_DMA_BUSY		0x1
++#define BS_DMA_DONE		0x2
++#define BS_HOST_BUSY	0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS		0x0
++#define RTS_BUFFLUSH	0x1
++#define RTS_RESERVED	0x2
++#define RTS_BUFERR		0x3
++
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union desc_sts_data
++{
++		/** raw register data */
++		uint32_t d32;
++		/** quadlet bits */
++		struct {
++		/** Received number of bytes */
++		unsigned bytes : 16;
++
++		unsigned reserved16_22 : 7;
++		/** Multiple Transfer - only for OUT EPs */
++		unsigned mtrf : 1;
++		/** Setup Packet received - only for OUT EPs */
++		unsigned sr : 1;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Receive Status */
++		unsigned sts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b;
++
++#ifdef DWC_EN_ISOC
++		/** iso out quadlet bits */
++		struct {
++		/** Received number of bytes */
++		unsigned rxbytes : 11;
++
++		unsigned reserved11 : 1;
++		/** Frame Number */
++		unsigned framenum : 11;
++		/** Received ISO Data PID */
++		unsigned pid : 2;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Receive Status */
++		unsigned rxsts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b_iso_out;
++
++		/** iso in quadlet bits */
++		struct {
++		/** Transmited number of bytes */
++		unsigned txbytes : 12;
++		/** Frame Number */
++		unsigned framenum : 11;
++		/** Transmited ISO Data PID */
++		unsigned pid : 2;
++		/** Interrupt On Complete */
++		unsigned ioc : 1;
++		/** Short Packet */
++		unsigned sp : 1;
++		/** Last */
++		unsigned l : 1;
++		/** Transmit Status */
++		unsigned txsts : 2;
++		/** Buffer Status */
++		unsigned bs : 2;
++		} b_iso_in;
++#endif //DWC_EN_ISOC
++} desc_sts_data_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dma_desc
++{
++	/** DMA Descriptor status quadlet */
++	desc_sts_data_t	status;
++	/** DMA Descriptor data buffer pointer */
++ 	dma_addr_t	buf;
++} dwc_otg_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if
++{
++	/** Pointer to device Global registers.
++	 * Device Global Registers starting at offset 800h
++	 */
++	dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++	/**
++	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++	 */
++	dwc_otg_dev_in_ep_regs_t	 *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++	dwc_otg_dev_out_ep_regs_t	 *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++	/* Device configuration information*/
++	uint8_t	 speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
++	uint8_t	 num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
++	uint8_t	 num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++	/** Size of periodic FIFOs (Bytes) */
++	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++
++	/**
++	 * Pointers to the DMA Descriptors for EP0 Control
++	 * transfers (virtual and physical)
++	 */
++	/** 2 descriptors for SETUP packets */
++	uint32_t dma_setup_desc_addr[2];
++	dwc_otg_dma_desc_t* setup_desc_addr[2];
++
++	/** Pointer to Descriptor with latest SETUP packet */
++	dwc_otg_dma_desc_t* psetup;
++
++	/** Index of current SETUP handler descriptor */
++	uint32_t setup_desc_index;
++
++	/** Descriptor for Data In or Status In phases */
++	uint32_t dma_in_desc_addr;
++	dwc_otg_dma_desc_t* in_desc_addr;;
++
++	/** Descriptor for Data Out or Status Out phases */
++	uint32_t dma_out_desc_addr;
++	dwc_otg_dma_desc_t* out_desc_addr;
++} dwc_otg_dev_if_t;
++
++
++
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs
++{
++	/** Host Configuration Register.   <i>Offset: 400h</i> */
++	volatile uint32_t hcfg;
++	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
++	volatile uint32_t hfir;
++	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++	volatile uint32_t hfnum;
++	/** Reserved.	<i>Offset: 40Ch</i> */
++	uint32_t reserved40C;
++	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++	volatile uint32_t hptxsts;
++	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++	volatile uint32_t haint;
++	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++	volatile uint32_t haintmsk;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** FS/LS Phy Clock Select */
++		unsigned fslspclksel : 2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ	   1
++#define DWC_HCFG_6_MHZ	   2
++
++		/** FS/LS Only Support */
++		unsigned fslssupp : 1;
++		} b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned frint : 16;
++		unsigned reserved : 16;
++	} b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned frnum : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frrem : 16;
++	} b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned ptxfspcavail : 16;
++		unsigned ptxqspcavail : 8;
++		/** Top of the Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (last entry for the selected channel)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - Zero length
++		 *	  - 2'b01 - Ping
++		 *	  - 2'b10 - Disable
++		 *	- bits 30:27 - Channel Number
++		 *	- bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_terminate : 1;
++		unsigned ptxqtop_token : 2;
++		unsigned ptxqtop_chnum : 4;
++		unsigned ptxqtop_odd : 1;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned prtconnsts : 1;
++		unsigned prtconndet : 1;
++		unsigned prtena : 1;
++		unsigned prtenchng : 1;
++		unsigned prtovrcurract : 1;
++		unsigned prtovrcurrchng : 1;
++		unsigned prtres : 1;
++		unsigned prtsusp : 1;
++		unsigned prtrst : 1;
++		unsigned reserved9 : 1;
++		unsigned prtlnsts : 2;
++		unsigned prtpwr : 1;
++		unsigned prttstctl : 4;
++		unsigned prtspd : 2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
++		unsigned reserved19_31 : 13;
++	} b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ch0 : 1;
++		unsigned ch1 : 1;
++		unsigned ch2 : 1;
++		unsigned ch3 : 1;
++		unsigned ch4 : 1;
++		unsigned ch5 : 1;
++		unsigned ch6 : 1;
++		unsigned ch7 : 1;
++		unsigned ch8 : 1;
++		unsigned ch9 : 1;
++		unsigned ch10 : 1;
++		unsigned ch11 : 1;
++		unsigned ch12 : 1;
++		unsigned ch13 : 1;
++		unsigned ch14 : 1;
++		unsigned ch15 : 1;
++		unsigned reserved : 16;
++	} b;
++
++	struct
++	{
++		unsigned chint : 16;
++		unsigned reserved : 16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		unsigned ch0 : 1;
++		unsigned ch1 : 1;
++		unsigned ch2 : 1;
++		unsigned ch3 : 1;
++		unsigned ch4 : 1;
++		unsigned ch5 : 1;
++		unsigned ch6 : 1;
++		unsigned ch7 : 1;
++		unsigned ch8 : 1;
++		unsigned ch9 : 1;
++		unsigned ch10 : 1;
++		unsigned ch11 : 1;
++		unsigned ch12 : 1;
++		unsigned ch13 : 1;
++		unsigned ch14 : 1;
++		unsigned ch15 : 1;
++		unsigned reserved : 16;
++	} b;
++
++	struct
++	{
++		unsigned chint : 16;
++		unsigned reserved : 16;
++	} b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs
++{
++	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++	volatile uint32_t hcchar;
++	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++	volatile uint32_t hcsplt;
++	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++	volatile uint32_t hcint;
++	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++	volatile uint32_t hcintmsk;
++	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++	volatile uint32_t hctsiz;
++	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++	volatile uint32_t hcdma;
++	/** Reserved.  <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++	uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Maximum packet size in bytes */
++		unsigned mps : 11;
++
++		/** Endpoint number */
++		unsigned epnum : 4;
++
++		/** 0: OUT, 1: IN */
++		unsigned epdir : 1;
++
++		unsigned reserved : 1;
++
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev : 1;
++
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype : 2;
++
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt : 2;
++
++		/** Device address */
++		unsigned devaddr : 7;
++
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm : 1;
++
++		/** Channel disable */
++		unsigned chdis : 1;
++
++		/** Channel enable */
++		unsigned chen : 1;
++	} b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Port Address */
++		unsigned prtaddr : 7;
++
++		/** Hub Address */
++		unsigned hubaddr : 7;
++
++		/** Transaction Position */
++		unsigned xactpos : 2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++		/** Do Complete Split */
++		unsigned compsplt : 1;
++
++		/** Reserved */
++		unsigned reserved : 14;
++
++		/** Split Enble */
++		unsigned spltena : 1;
++	} b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data
++{
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct
++	{
++		/** Transfer Complete */
++		unsigned xfercomp : 1;
++		/** Channel Halted */
++		unsigned chhltd : 1;
++		/** AHB Error */
++		unsigned ahberr : 1;
++		/** STALL Response Received */
++		unsigned stall : 1;
++		/** NAK Response Received */
++		unsigned nak : 1;
++		/** ACK Response Received */
++		unsigned ack : 1;
++		/** NYET Response Received */
++		unsigned nyet : 1;
++		/** Transaction Err */
++		unsigned xacterr : 1;
++		/** Babble Error */
++		unsigned bblerr : 1;
++		/** Frame Overrun */
++		unsigned frmovrun : 1;
++		/** Data Toggle Error */
++		unsigned datatglerr : 1;
++		/** Reserved */
++		unsigned reserved : 21;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Total transfer size in bytes */
++		unsigned xfersize : 19;
++
++		/** Data packets to transfer */
++		unsigned pktcnt : 10;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid : 2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++		/** Do PING protocol when 1 */
++		unsigned dopng : 1;
++	} b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		unsigned xfercompl : 1;
++		unsigned chhltd : 1;
++		unsigned ahberr : 1;
++		unsigned stall : 1;
++		unsigned nak : 1;
++		unsigned ack : 1;
++		unsigned nyet : 1;
++		unsigned xacterr : 1;
++		unsigned bblerr : 1;
++		unsigned frmovrun : 1;
++		unsigned datatglerr : 1;
++		unsigned reserved : 21;
++	} b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if
++{
++	/** Host Global Registers starting at offset 400h.*/
++	dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++	/** Host Port 0 Control and Status Register */
++	volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++	/** Host Channel Specific Registers at offsets 500h-5FCh. */
++	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++	/* Host configuration information */
++	/** Number of Host Channels (range: 1-16) */
++	uint8_t	 num_host_channels;
++	/** Periodic EPs supported (0: no, 1: yes) */
++	uint8_t	 perio_eps_supported;
++	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++	uint16_t perio_tx_fifo_size;
++} dwc_otg_host_if_t;
++
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data
++{
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct
++	{
++		/** Stop Pclk */
++		unsigned stoppclk : 1;
++		/** Gate Hclk */
++		unsigned gatehclk : 1;
++		/** Power Clamp */
++		unsigned pwrclmp : 1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule : 1;
++		/** PHY Suspended */
++		unsigned physuspended : 1;
++		unsigned reserved : 27;
++	} b;
++} pcgcctl_data_t;
++
++
++#endif
+--- a/drivers/usb/core/urb.c
++++ b/drivers/usb/core/urb.c
+@@ -17,7 +17,11 @@ static void urb_destroy(struct kref *kre
+ 
+ 	if (urb->transfer_flags & URB_FREE_BUFFER)
+ 		kfree(urb->transfer_buffer);
+-
++	if (urb->aligned_transfer_buffer) {
++		kfree(urb->aligned_transfer_buffer);
++		urb->aligned_transfer_buffer = 0;
++		urb->aligned_transfer_dma = 0;
++	}
+ 	kfree(urb);
+ }
+ 
+--- a/include/linux/usb.h
++++ b/include/linux/usb.h
+@@ -1234,6 +1234,9 @@ struct urb {
+ 	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
+ 	void *transfer_buffer;		/* (in) associated data buffer */
+ 	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
++	void *aligned_transfer_buffer;	/* (in) associeated data buffer */
++	dma_addr_t aligned_transfer_dma;/* (in) dma addr for transfer_buffer */
++	u32 aligned_transfer_buffer_length; /* (in) data buffer length */
+ 	struct scatterlist *sg;		/* (in) scatter gather buffer list */
+ 	int num_mapped_sgs;		/* (internal) mapped sg entries */
+ 	int num_sgs;			/* (in) number of entries in the sg list */
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -125,6 +125,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
+ #
+ choice
+ 	prompt "USB Peripheral Controller"
++	depends on !USB_DWC_OTG
+ 	help
+ 	   A USB device uses a controller to talk to its host.
+ 	   Systems should have only one such upstream link.
+@@ -616,7 +617,7 @@ config USB_ETH
+ 	help
+ 	  This driver implements Ethernet style communication, in one of
+ 	  several ways:
+-	  
++
+ 	   - The "Communication Device Class" (CDC) Ethernet Control Model.
+ 	     That protocol is often avoided with pure Ethernet adapters, in
+ 	     favor of simpler vendor-specific hardware, but is widely
+@@ -656,7 +657,7 @@ config USB_ETH_RNDIS
+ 	   If you say "y" here, the Ethernet gadget driver will try to provide
+ 	   a second device configuration, supporting RNDIS to talk to such
+ 	   Microsoft USB hosts.
+-	   
++
+ 	   To make MS-Windows work with this, use Documentation/usb/linux.inf
+ 	   as the "driver info file".  For versions of MS-Windows older than
+ 	   XP, you'll need to download drivers from Microsoft's website; a URL
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -3,7 +3,7 @@
+ #
+ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
+ 
+-obj-$(CONFIG_USB_GADGET)	+= udc-core.o
++#obj-$(CONFIG_USB_GADGET)	+= udc-core.o
+ obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
+ obj-$(CONFIG_USB_NET2272)	+= net2272.o
+ obj-$(CONFIG_USB_NET2280)	+= net2280.o