cns3xxx: remove linux 4.9 support

- Remove kernel 4.9 support
- Apply specific 4.14 changes directly to source
- Refreshed all

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

1 files changed, 0 insertions, 47 deletions

diff --git a/target/linux/cns3xxx/patches-4.9/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-4.9/210-dwc2_defaults.patch
deleted file mode 100644
index 9cd05eac6a..0000000000
--- a/target/linux/cns3xxx/patches-4.9/210-dwc2_defaults.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -308,6 +308,34 @@ static int __dwc2_lowlevel_hw_enable(str
- 	return ret;
- }
- 
-+static const struct dwc2_core_params params_cns3xxx = {
-+	.otg_cap			= 2,	/* non-HNP/non-SRP capable */
-+	.otg_ver			= 0,	/* 1.3 */
-+	.dma_enable			= 1,
-+	.dma_desc_enable		= 0,
-+	.speed				= 0,	/* High Speed */
-+	.enable_dynamic_fifo		= 1,
-+	.en_multiple_tx_fifo		= 1,
-+	.host_rx_fifo_size		= 658,	/* 774 DWORDs */
-+	.host_nperio_tx_fifo_size	= 128,	/* 256 DWORDs */
-+	.host_perio_tx_fifo_size	= 658,	/* 512 DWORDs */
-+	.max_transfer_size		= 65535,
-+	.max_packet_count		= 511,
-+	.host_channels			= 16,
-+	.phy_type			= 1,	/* UTMI */
-+	.phy_utmi_width			= 16,	/* 8 bits */
-+	.phy_ulpi_ddr			= 0,	/* Single */
-+	.phy_ulpi_ext_vbus		= 0,
-+	.i2c_enable			= 0,
-+	.ulpi_fs_ls			= 0,
-+	.host_support_fs_ls_low_power	= 0,
-+	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
-+	.ts_dline			= 0,
-+	.reload_ctl			= 0,
-+	.ahbcfg				= 0x10,
-+	.uframe_sched			= 0,
-+};
-+
- /**
-  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
-  * @hsotg: The driver state
-@@ -552,6 +580,9 @@ static int dwc2_driver_probe(struct plat
- 		/* Default all params to autodetect */
- 		dwc2_set_all_params(&defparams, -1);
- 		params = &defparams;
-+#ifdef CONFIG_ARCH_CNS3XXX
-+		params = &params_cns3xxx;
-+#endif
- 
- 		/*
- 		 * Disable descriptor dma mode by default as the HW can support