brcm63xx: allow setting the number of usb host ports for boards

Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39324

7 files changed, 180 insertions, 8 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-3.10/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
new file mode 100644
index 0000000000..b6e44a7078
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
@@ -0,0 +1,65 @@
+From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 19 Jan 2014 12:18:03 +0100
+Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
+
+In the same way as the ohci platform driver allows limiting ports,
+enable the same for ehci. This prevents a mismatch in the available
+ports between ehci/ohci on USB 2.0 controllers.
+
+This is needed if the USB host controller always reports the maximum
+number of ports regardless of the number of available ports (because
+one might be set to be usb device).
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      | 4 ++++
+ drivers/usb/host/ehci-platform.c | 2 ++
+ drivers/usb/host/ehci.h          | 1 +
+ include/linux/usb/ehci_pdriver.h | 1 +
+ 4 files changed, 8 insertions(+)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -661,6 +661,10 @@ int ehci_setup(struct usb_hcd *hcd)
+ 
+ 	/* cache this readonly data; minimize chip reads */
+ 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++	if (ehci->num_ports) {
++		ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
++		ehci->hcs_params |= ehci->num_ports;
++	}
+ 
+ 	ehci->sbrn = HCD_USB2;
+ 
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -48,6 +48,8 @@ static int ehci_platform_reset(struct us
+ 	ehci->big_endian_desc = pdata->big_endian_desc;
+ 	ehci->big_endian_mmio = pdata->big_endian_mmio;
+ 	ehci->ignore_oc = pdata->ignore_oc;
++	if (pdata->num_ports && pdata->num_ports <= 15)
++		ehci->num_ports = pdata->num_ports;
+ 
+ 	ehci->caps = hcd->regs + pdata->caps_offset;
+ 	retval = ehci_setup(hcd);
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -188,6 +188,7 @@ struct ehci_hcd {			/* one per controlle
+ 	u32			command;
+ 
+ 	/* SILICON QUIRKS */
++	unsigned int		num_ports;
+ 	unsigned		no_selective_suspend:1;
+ 	unsigned		has_fsl_port_bug:1; /* FreeScale */
+ 	unsigned		big_endian_mmio:1;
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -37,6 +37,7 @@
+  */
+ struct usb_ehci_pdata {
+ 	int		caps_offset;
++	unsigned int	num_ports;
+ 	unsigned	has_tt:1;
+ 	unsigned	has_synopsys_hc_bug:1;
+ 	unsigned	big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-3.10/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-3.10/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
new file mode 100644
index 0000000000..43709afd2e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
@@ -0,0 +1,107 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -42,6 +42,7 @@ struct board_info {
+ 
+ 	/* USB config */
+ 	struct bcm63xx_usbd_platform_data usbd;
++	unsigned int num_usbh_ports:2;
+ 
+ 	/* DSP config */
+ 	struct bcm63xx_dsp_platform_data dsp;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_EHCI_H_
+ #define BCM63XX_DEV_USB_EHCI_H_
+ 
+-int bcm63xx_ehci_register(void);
++int bcm63xx_ehci_register(unsigned int num_ports);
+ 
+ #endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_OHCI_H_
+ #define BCM63XX_DEV_USB_OHCI_H_
+ 
+-int bcm63xx_ohci_register(void);
++int bcm63xx_ohci_register(unsigned int num_ports);
+ 
+ #endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -965,6 +965,7 @@ int __init board_register_devices(void)
+ {
+ 	int button_count = 0;
+ 	int led_count = 0;
++	int usbh_ports = 0;
+ 
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+@@ -987,14 +988,21 @@ int __init board_register_devices(void)
+ 	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+ 		bcm63xx_enetsw_register(&board.enetsw);
+ 
++	if ((board.has_ohci0 || board.has_ehci0)) {
++		usbh_ports = board.num_usbh_ports;
++
++		if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
++			usbh_ports = 1;
++	}
++
+ 	if (board.has_usbd)
+ 		bcm63xx_usbd_register(&board.usbd);
+ 
+ 	if (board.has_ehci0)
+-		bcm63xx_ehci_register();
++		bcm63xx_ehci_register(usbh_ports);
+ 
+ 	if (board.has_ohci0)
+-		bcm63xx_ohci_register();
++		bcm63xx_ohci_register(usbh_ports);
+ 
+ 	if (board.has_dsp)
+ 		bcm63xx_dsp_register(&board.dsp);
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
+ 	},
+ };
+ 
+-int __init bcm63xx_ehci_register(void)
++int __init bcm63xx_ehci_register(unsigned int num_ports)
+ {
+ 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+ 		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+ 		return 0;
+ 
++	bcm63xx_ehci_pdata.num_ports = num_ports;	
++
+ 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+ 	ehci_resources[0].end = ehci_resources[0].start;
+ 	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
+ 	.big_endian_desc	= 1,
+ 	.big_endian_mmio	= 1,
+ 	.no_big_frame_no	= 1,
+-	.num_ports		= 1,
+ 	.power_on		= bcm63xx_ohci_power_on,
+ 	.power_off		= bcm63xx_ohci_power_off,
+ 	.power_suspend		= bcm63xx_ohci_power_off,
+@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
+ 	},
+ };
+ 
+-int __init bcm63xx_ohci_register(void)
++int __init bcm63xx_ohci_register(unsigned int num_ports)
+ {
+ 	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+ 		return -ENODEV;
+ 
++	bcm63xx_ohci_pdata.num_ports = num_ports;
++
+ 	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+ 	ohci_resources[0].end = ohci_resources[0].start;
+ 	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.10/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.10/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
index ceab4018c5..0b7c1ca540 100644
--- a/target/linux/brcm63xx/patches-3.10/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ b/target/linux/brcm63xx/patches-3.10/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
@@ -18,15 +18,15 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  
  #include <uapi/linux/bcm933xx_hcs.h>
  #include <uapi/linux/bcm963xx_tag.h>
-@@ -967,6 +968,7 @@ int __init board_register_devices(void)
- {
+@@ -968,6 +969,7 @@ int __init board_register_devices(void)
  	int button_count = 0;
  	int led_count = 0;
+ 	int usbh_ports = 0;
 +	int i;
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -1005,7 +1007,8 @@ int __init board_register_devices(void)
+@@ -1013,7 +1015,8 @@ int __init board_register_devices(void)
  	 * do this after registering enet devices
  	 */
  #ifdef CONFIG_SSB_PCIHOST
@@ -36,7 +36,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		if (ssb_arch_register_fallback_sprom(
-@@ -1052,5 +1055,9 @@ int __init board_register_devices(void)
+@@ -1060,5 +1063,9 @@ int __init board_register_devices(void)
  		platform_device_register(&bcm63xx_gpio_keys_device);
  	}
  
diff --git a/target/linux/brcm63xx/patches-3.10/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.10/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
index 973f822dd6..038a9988aa 100644
--- a/target/linux/brcm63xx/patches-3.10/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ b/target/linux/brcm63xx/patches-3.10/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
@@ -11,7 +11,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1027,7 +1027,7 @@ int __init board_register_devices(void)
+@@ -1035,7 +1035,7 @@ int __init board_register_devices(void)
  	if (board.num_spis)
  		spi_register_board_info(board.spis, board.num_spis);
  
diff --git a/target/linux/brcm63xx/patches-3.10/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.10/420-BCM63XX-add-endian-check-for-ath9k.patch
index 8bde2a8864..bd2518920f 100644
--- a/target/linux/brcm63xx/patches-3.10/420-BCM63XX-add-endian-check-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.10/420-BCM63XX-add-endian-check-for-ath9k.patch
@@ -39,7 +39,7 @@
  		return;
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1057,7 +1057,8 @@ int __init board_register_devices(void)
+@@ -1065,7 +1065,8 @@ int __init board_register_devices(void)
  
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)
diff --git a/target/linux/brcm63xx/patches-3.10/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.10/421-BCM63XX-add-led-pin-for-ath9k.patch
index 192cd5fca9..b6e9358d66 100644
--- a/target/linux/brcm63xx/patches-3.10/421-BCM63XX-add-led-pin-for-ath9k.patch
+++ b/target/linux/brcm63xx/patches-3.10/421-BCM63XX-add-led-pin-for-ath9k.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1058,7 +1058,7 @@ int __init board_register_devices(void)
+@@ -1066,7 +1066,7 @@ int __init board_register_devices(void)
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)
  		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
diff --git a/target/linux/brcm63xx/patches-3.10/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.10/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
index 4747ae7a99..d6d2fb3950 100644
--- a/target/linux/brcm63xx/patches-3.10/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ b/target/linux/brcm63xx/patches-3.10/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
@@ -36,7 +36,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
  
  #include <uapi/linux/bcm933xx_hcs.h>
  #include <uapi/linux/bcm963xx_tag.h>
-@@ -1056,9 +1057,19 @@ int __init board_register_devices(void)
+@@ -1064,9 +1065,19 @@ int __init board_register_devices(void)
  	}
  
  	/* register any fixups */