[brcm63xx] update livebox board support (#8677)

Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 200 insertions, 62 deletions

diff --git a/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch
index b00c1529d4..d336420690 100644
--- a/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch
+++ b/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch
@@ -20,7 +20,7 @@
  ccflags-y := -Werror
 --- /dev/null
 +++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,228 @@
+@@ -0,0 +1,366 @@
 +/*
 + * This file is subject to the terms and conditions of the GNU General Public
 + * License.  See the file "COPYING" in the main directory of this archive
@@ -36,23 +36,30 @@
 +#include <linux/mtd/mtd.h>
 +#include <linux/mtd/partitions.h>
 +#include <linux/mtd/physmap.h>
++#include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
 +#include <linux/input.h>
-+#include <linux/gpio_buttons.h>
++#include <linux/spi/spi.h>
 +#include <asm/addrspace.h>
 +#include <bcm63xx_board.h>
 +#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
 +#include <bcm63xx_regs.h>
 +#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_uart.h>
 +#include <bcm63xx_dev_pci.h>
 +#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_dsp.h>
 +#include <bcm63xx_dev_pcmcia.h>
 +#include <bcm63xx_dev_usb_ohci.h>
 +#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_spi.h>
 +#include <board_bcm963xx.h>
 +
 +#define PFX	"board_livebox: "
 +
++#define LIVEBOX_KEYS_POLL_INTERVAL	20
++#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL	(LIVEBOX_KEYS_POLL_INTERVAL * 3)
++
 +static unsigned int mac_addr_used = 0;
 +static struct board_info board;
 +
@@ -60,8 +67,8 @@
 + * known 6348 boards
 + */
 +#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox = {
-+	.name				= "Livebox",
++static struct board_info __initdata board_livebox_blue5g = {
++	.name				= "Livebox-blue-5g",
 +	.expected_cpu_id		= 0x6348,
 +
 +	.has_uart0			= 1,
@@ -75,13 +82,65 @@
 +	},
 +
 +	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
++		  .has_phy		= 1,
++		  .phy_id 		= 31,
 +	},
 +
 +	.has_ohci0			= 1,
 +	.has_pccard			= 1,
-+	.has_ehci0			= 1,
++
++	.has_dsp			= 0, /*TODO some Liveboxes have dsp*/
++	.dsp = {
++		.gpio_rst		= 6, /*FIXME eth1 shares gpio6 with dsp?*/
++		.gpio_int		= 35,
++		.cs			= 2,
++		.ext_irq		= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "Livebox-blue-5g::adsl-fail",
++			.gpio		= 0,
++			.active_low	= 0,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "Livebox-blue-5g::adsl",
++			.gpio		= 1,
++		},
++		{
++			.name		= "Livebox-blue-5g::traffic",
++			.gpio		= 2,
++		},
++		{
++			.name		= "Livebox-blue-5g::phone",
++			.gpio		= 3,
++		},
++		{
++			.name		= "Livebox-blue-5g::wifi",
++			.gpio		= 4,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "BTN_1",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "BTN_2",
++			.gpio		= 7,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_2,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++
++	},
 +};
 +#endif
 +
@@ -90,22 +149,78 @@
 + */
 +static const struct board_info __initdata *bcm963xx_boards[] = {
 +#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox
++	&board_livebox_blue5g
 +#endif
 +};
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++	return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++static int board_get_mac_address(u8 *mac)
++{
++	u8 *p;
++	int count;
++
++	memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++	p = mac + ETH_ALEN - 1;
++	count = mac_addr_used;
++
++	while (count--) {
++		do {
++			(*p)++;
++			if (*p != 0)
++				break;
++			p--;
++		} while (p != mac);
++	}
++
++	if (p == mac) {
++		printk(KERN_ERR PFX "unable to fetch mac address\n");
++		return -ENODEV;
++	}
++        mac_addr_used++;
++
++	return 0;
++}
 +
 +/*
 + * early init callback
 + */
++#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
++#define LIVEBOX_BOOT_ADDR		0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9		0x90
++
 +void __init board_prom_init(void)
 +{
 +	u32 val;
++	u8 hw_version;
++
++	/* Get hardware version */
++	val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++	val &= ~LIVEBOX_GPIO_DETECT_MASK;
++	bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++	hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
++	switch (hw_version) {
++	case LIVEBOX_HW_BLUE5G_9:
++		printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++		memcpy(&board, bcm963xx_boards[0], sizeof(board));
++		break;
++	default:
++		printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
++		break;
++	}
 +
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+
-+	/* assume board is a Livebox */
++	/* use default livebox configuration */
 +	memcpy(&board, bcm963xx_boards[0], sizeof(board));
 +
 +	/* setup pin multiplexing depending on board enabled device,
@@ -113,12 +228,12 @@
 +	 * inside arch_initcall */
 +	val = 0;
 +
++#ifdef CONFIG_PCI
 +	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
 +		if (BCMCPU_IS_6348())
 +			val |= GPIO_MODE_6348_G2_PCI;
 +	}
-+
++#endif
 +	if (board.has_pccard) {
 +		if (BCMCPU_IS_6348())
 +			val |= GPIO_MODE_6348_G1_MII_PCCARD;
@@ -134,6 +249,10 @@
 +		if (BCMCPU_IS_6348())
 +			val |= GPIO_MODE_6348_G3_EXT_MII |
 +				GPIO_MODE_6348_G0_EXT_MII;
++			printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
++			gpio_request(6, "dsp_eth_rst");
++			gpio_direction_output(6, 0);
++			gpio_set_value(6, 1);
 +	}
 +
 +	bcm_gpio_writel(val, GPIO_MODE_REG);
@@ -154,47 +273,6 @@
 +		panic("unexpected CPU for bcm963xx board");
 +}
 +
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+
-+static int board_get_mac_address(u8 *mac)
-+{
-+	u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-+	u8 *p;
-+	int count;
-+
-+	memcpy(mac, default_mac, ETH_ALEN);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+        mac_addr_used++;
-+
-+	return 0;
-+}
-+
 +static struct resource mtd_resources[] = {
 +	{
 +		.start          = 0,    /* filled at runtime */
@@ -209,6 +287,23 @@
 +	.num_resources          = ARRAY_SIZE(mtd_resources),
 +};
 +
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++	.name			= "leds-gpio",
++	.id			= 0,
++	.dev.platform_data	= &bcm63xx_led_data,
++};
++
++static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
++	.poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
++};
++
++static struct platform_device bcm63xx_gpio_keys_device = {
++	.name		= "gpio-keys-polled",
++	.id		= 0,
++	.dev.platform_data = &bcm63xx_gpio_keys_data,
++};
 +
 +/*
 + * third stage init callback, register all board devices.
@@ -216,10 +311,15 @@
 +int __init board_register_devices(void)
 +{
 +	u32 val;
++	int led_count = 0;
++	int button_count = 0;
 +
 +	if (board.has_uart0)
 +		bcm63xx_uart_register(0);
 +
++	if (board.has_uart1)
++		bcm63xx_uart_register(1);
++
 +	if (board.has_pccard)
 +		bcm63xx_pcmcia_register();
 +
@@ -231,21 +331,59 @@
 +	    !board_get_mac_address(board.enet1.mac_addr))
 +		bcm63xx_enet_register(1, &board.enet1);
 +
++	if (board.has_ehci0)
++		bcm63xx_ehci_register();
++
 +	if (board.has_ohci0)
 +		bcm63xx_ohci_register();
 +
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
++	if (board.has_dsp)
++		bcm63xx_dsp_register(&board.dsp);
++
++	bcm63xx_spi_register();
++
++	if (board.num_devs)
++		platform_add_devices(board.devs, board.num_devs);
++
++	if (board.num_spis)
++		spi_register_board_info(board.spis, board.num_spis);
 +
 +
 +	/* read base address of boot chip select (0) */
 +	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
 +	val &= MPI_CSBASE_BASE_MASK;
-+	mtd_resources[0].start = val;
-+	mtd_resources[0].end = 0x1FFFFFFF;
++	if (val != LIVEBOX_BOOT_ADDR)
++		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++			val, LIVEBOX_BOOT_ADDR);
++	mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
++	mtd_resources[0].end = 0x1ebfffff;
 +
 +	platform_device_register(&mtd_dev);
 +
++	/* count number of LEDs defined by this device */
++	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++		led_count++;
++
++	bcm63xx_led_data.num_leds = led_count;
++	bcm63xx_led_data.leds = board.leds;
++
++	platform_device_register(&bcm63xx_gpio_leds);
++
++	/* count number of BUTTONs defined by this device */
++	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++		button_count++;
++
++	if (button_count) {
++		bcm63xx_gpio_keys_data.nbuttons = button_count;
++		bcm63xx_gpio_keys_data.buttons = board.buttons;
++
++		platform_device_register(&bcm63xx_gpio_keys_device);
++	}
++
++#ifdef CONFIG_PCI
++	if (board.has_pci)
++		bcm63xx_pci_register();
++#endif
++
 +	return 0;
 +}
-+