brcm63xx: remove support for 3.8 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36948 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 89 deletions

diff --git a/target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch
deleted file mode 100644
index 3b107959b8..0000000000
--- a/target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -147,6 +147,78 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96328A_1441N1 = {
-+	.name					= "96328A-1441N1",
-+	.expected_cpu_id			= 0x6328,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+	.has_enetsw				= 1,
-+
-+	.enetsw = {
-+		.used_ports = {
-+			[0] = {
-+				.used		= 1,
-+				.phy_id		= 1,
-+				.name		= "Port 1",
-+			},
-+			[1] = {
-+				.used		= 1,
-+				.phy_id		= 2,
-+				.name		= "Port 2",
-+			},
-+			[2] = {
-+				.used		= 1,
-+				.phy_id		= 3,
-+				.name		= "Port 3",
-+			},
-+			[3] = {
-+				.used		= 1,
-+				.phy_id		= 4,
-+				.name		= "Port 4",
-+			},
-+		},
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "96328A-1441N1:green:power",
-+			.gpio			= 8,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "96328A-1441N1:red:power",
-+			.gpio			= 4,
-+		},
-+		{
-+			.name			= "96328A-1441N1:green:inet",
-+			.gpio			= 7,
-+		},
-+		{
-+			.name			= "96328A-1441N1:red:inet",
-+			.gpio			= 1,
-+		},
-+		{
-+			.name			= "96328A-1441N1:green:dsl",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "reset",
-+			.gpio			= 23,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_963281TAN = {
- 	.name				= "963281TAN",
- 	.expected_cpu_id		= 0x6328,
-@@ -3046,6 +3118,7 @@ static struct board_info __initdata boar
- static const struct board_info __initconst *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
- 	&board_96328avng,
-+	&board_96328A_1441N1,
- 	&board_963281TAN,
- 	&board_963281T_TEF,
- 	&board_dsl_274xb_f1,