brcm63xx: remove 3.7 kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504

1 files changed, 0 insertions, 447 deletions

diff --git a/target/linux/brcm63xx/patches-3.7/554-board_hw556.patch b/target/linux/brcm63xx/patches-3.7/554-board_hw556.patch
deleted file mode 100644
index 55aadeeb42..0000000000
--- a/target/linux/brcm63xx/patches-3.7/554-board_hw556.patch
+++ /dev/null
@@ -1,447 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2973,6 +2973,374 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_HW556 = {
-+	.name					= "HW556",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.caldata_offset		= 0xe00000,
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "HW556:red:message",
-+			.gpio			= 0,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:hspa",
-+			.gpio			= 1,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:dsl",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:power",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "HW556:red:all",
-+			.gpio			= 6,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "help",
-+			.gpio			= 8,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_HELP,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wlan",
-+			.gpio			= 9,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "restart",
-+			.gpio			= 10,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_CONFIG,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+static struct board_info __initdata board_HW556_A = {
-+	.name					= "HW556_A",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_RALINK,
-+			.caldata_offset		= 0xeffe00,
-+			.slot			= 1,
-+			.eeprom			= "rt2x00.eeprom",
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "HW556:red:message",
-+			.gpio			= 0,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:hspa",
-+			.gpio			= 1,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:dsl",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:power",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "HW556:red:all",
-+			.gpio			= 6,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "help",
-+			.gpio			= 8,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_HELP,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wlan",
-+			.gpio			= 9,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "restart",
-+			.gpio			= 10,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_CONFIG,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+static struct board_info __initdata board_HW556_B = {
-+	.name					= "HW556_B",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset		= 0xf7e000,
-+			.slot			= 1,
-+			.endian_check		= 1,
-+			.led_pin		= 2,
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "HW556:red:message",
-+			.gpio			= 0,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:hspa",
-+			.gpio			= 1,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:dsl",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:power",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "HW556:red:all",
-+			.gpio			= 6,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "help",
-+			.gpio			= 8,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_HELP,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wlan",
-+			.gpio			= 9,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "restart",
-+			.gpio			= 10,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_CONFIG,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+static struct board_info __initdata board_HW556_C = {
-+	.name					= "HW556_C",
-+	.expected_cpu_id			= 0x6358,
-+
-+	.has_uart0				= 1,
-+	.has_pci				= 1,
-+	.has_ohci0				= 1,
-+	.has_ehci0				= 1,
-+
-+	.has_caldata				= 1,
-+	.caldata = {
-+		{
-+			.vendor			= PCI_VENDOR_ID_ATHEROS,
-+			.caldata_offset		= 0xefe000,
-+			.slot			= 1,
-+			.endian_check		= 1,
-+			.led_pin		= 2,
-+		},
-+	},
-+
-+	.has_enet1				= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name			= "HW556:red:message",
-+			.gpio			= 0,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:hspa",
-+			.gpio			= 1,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:dsl",
-+			.gpio			= 2,
-+			.active_low		= 1,
-+		},
-+		{
-+			.name			= "HW556:red:power",
-+			.gpio			= 3,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name			= "HW556:red:all",
-+			.gpio			= 6,
-+			.active_low		= 1,
-+			.default_trigger	= "default-on",
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc			= "help",
-+			.gpio			= 8,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_HELP,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "wlan",
-+			.gpio			= 9,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_WLAN,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "restart",
-+			.gpio			= 10,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+		{
-+			.desc			= "reset",
-+			.gpio			= 11,
-+			.active_low		= 1,
-+			.type			= EV_KEY,
-+			.code			= KEY_CONFIG,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
- 	.name			= "96358-502V",
-@@ -3401,6 +3769,10 @@ static const struct board_info __initcon
- 	&board_nb4_fxc_r2,
- 	&board_ct6373_1,
- 	&board_HW553,
-+	&board_HW556,
-+	&board_HW556_A,
-+	&board_HW556_B,
-+	&board_HW556_C,
- 	&board_spw303v,
- 	&board_DVAG3810BN,
- #endif
-@@ -3466,13 +3838,37 @@ static void __init boardid_fixup(u8 *boo
- 	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
- 	char *board_name = (char *)bcm63xx_nvram_get_name();
- 
--	if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
--		u8 *p = boot_addr + NB4_PID_OFFSET;
--
--		/* Extract nb4 PID */
--		if (!memcmp(p, "NB4-", 4)) {
--			memcpy(board_name, p, sizeof("NB4-XXX-rX"));
--			return;
-+	if (BCMCPU_IS_6358()) {
-+		if (!strcmp(board_name, "96358VW")) {
-+			u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+			/* Extract nb4 PID */
-+			if (!memcmp(p, "NB4-", 4)) {
-+				memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+				return;
-+			}
-+		} else if (!strcmp(board_name, "HW556")) {
-+			/*
-+			 * HW556 has different wlan caldatas depending on
-+			 * hardware version.
-+			 * Detect hardware version and change board id
-+			 */
-+			u8 cal_data_ath9k[4] = { 0xa5, 0x5a, 0, 0 };
-+			u8 cal_data_rt3062[4] = { 0x62, 0x30, 1, 0 };
-+
-+			if (!memcmp(boot_addr + 0xeffe00,
-+				    &cal_data_rt3062, 4)) {
-+				/* Ralink 0xeffe00 */
-+				memcpy(board_name, "HW556_A", 7);
-+			} else if (!memcmp(boot_addr + 0xf7e000,
-+					   &cal_data_ath9k, 4)) {
-+				/* Atheros 0xf7e000 */
-+				memcpy(board_name, "HW556_B", 7);
-+			} else if (!memcmp(boot_addr + 0xefe000,
-+					   &cal_data_ath9k, 4)) {
-+				/* Atheros 0xefe000 */
-+				memcpy(board_name, "HW556_C", 7);
-+			}
- 		}
- 	}
- 
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -93,6 +93,11 @@ static int bcm63xx_parse_cfe_partitions(
- 			      BCM63XX_CFE_BLOCK_SIZE);
- 
- 	cfelen = cfe_erasesize;
-+
-+	/* Fix HW556 MX29LV128DB */
-+	if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
-+		cfelen = 0x20000;
-+
- 	nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
- 	nvramlen = roundup(nvramlen, cfe_erasesize);
- 	nvramaddr = master->size - nvramlen;