brcm63xx: remove 3.7 kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504

1 files changed, 0 insertions, 279 deletions

diff --git a/target/linux/brcm63xx/patches-3.7/107-spi-bcm63xx-fix-multi-transfer-messages.patch b/target/linux/brcm63xx/patches-3.7/107-spi-bcm63xx-fix-multi-transfer-messages.patch
deleted file mode 100644
index 2da5044492..0000000000
--- a/target/linux/brcm63xx/patches-3.7/107-spi-bcm63xx-fix-multi-transfer-messages.patch
+++ /dev/null
@@ -1,279 +0,0 @@
-From 0f2ae1e1282ff64f74a5e36f7da874f94911225e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 14 Nov 2012 22:22:33 +0100
-Subject: [PATCH] spi/bcm63xx: fix multi transfer messages
-
-The BCM63XX SPI controller does not support keeping CS asserted after
-sending its buffer. This breaks common usages like spi_write_then_read,
-where it is expected to be kept active during the whole transfers.
-
-Work around this by combining the transfers into one if the buffer
-allows. For spi_write_then_read, use the prepend byte feature to write
-to "prepend" the write if it is less than 15 bytes, allowing the whole
-fifo size for the read.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-Tested on a SPI conntected switch which required keeping CS active between
-the register read command and reading the register contents.
-
-Based on Mark's spi/next.
-
-Not sure if this is stable material, as it's quite invasive.
-
- drivers/spi/spi-bcm63xx.c |  172 ++++++++++++++++++++++++++++++---------------
- 1 file changed, 117 insertions(+), 55 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -38,6 +38,8 @@
- #define PFX		KBUILD_MODNAME
- #define DRV_VER		"0.1.2"
- 
-+#define BCM63XX_SPI_MAX_PREPEND		15
-+
- struct bcm63xx_spi {
- 	struct completion	done;
- 
-@@ -50,16 +52,10 @@ struct bcm63xx_spi {
- 	unsigned int		msg_type_shift;
- 	unsigned int		msg_ctl_width;
- 
--	/* Data buffers */
--	const unsigned char	*tx_ptr;
--	unsigned char		*rx_ptr;
--
- 	/* data iomem */
- 	u8 __iomem		*tx_io;
- 	const u8 __iomem	*rx_io;
- 
--	int			remaining_bytes;
--
- 	struct clk		*clk;
- 	struct platform_device	*pdev;
- };
-@@ -184,50 +180,60 @@ static int bcm63xx_spi_setup(struct spi_
- 	return 0;
- }
- 
--/* Fill the TX FIFO with as many bytes as possible */
--static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
--{
--	u8 size;
--
--	/* Fill the Tx FIFO with as many bytes as possible */
--	size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
--		bs->fifo_size;
--	memcpy_toio(bs->tx_io, bs->tx_ptr, size);
--	bs->remaining_bytes -= size;
--}
--
- static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
--					struct spi_transfer *t)
-+					struct spi_transfer *first,
-+					unsigned int n_transfers)
- {
- 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- 	u16 msg_ctl;
- 	u16 cmd;
-+	unsigned int i, timeout, total_len = 0, prepend_len = 0, len = 0;
-+	struct spi_transfer *t = first;
-+	u8 rx_tail;
-+	bool do_rx = false;
-+	bool do_tx = false;
- 
- 	/* Disable the CMD_DONE interrupt */
- 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
- 
--	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
--		t->tx_buf, t->rx_buf, t->len);
-+	if (n_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
-+		prepend_len = t->len;
-+
-+	/* prepare the buffer */
-+	for (i = 0; i < n_transfers; i++) {
-+		if (t->tx_buf) {
-+			do_tx = true;
-+			memcpy_toio(bs->tx_io + total_len, t->tx_buf, t->len);
-+
-+			/* don't prepend more than one tx */
-+			if (t != first)
-+				prepend_len = 0;
-+		}
-+
-+		if (t->rx_buf) {
-+			do_rx = true;
-+			if (t == first)
-+				prepend_len = 0;
-+		}
- 
--	/* Transmitter is inhibited */
--	bs->tx_ptr = t->tx_buf;
--	bs->rx_ptr = t->rx_buf;
--
--	if (t->tx_buf) {
--		bs->remaining_bytes = t->len;
--		bcm63xx_spi_fill_tx_fifo(bs);
-+		total_len += t->len;
-+
-+		t = list_entry(t->transfer_list.next, struct spi_transfer,
-+			       transfer_list);
- 	}
- 
-+	len = total_len - prepend_len;
-+
- 	init_completion(&bs->done);
- 
- 	/* Fill in the Message control register */
--	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+	msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
- 
--	if (t->rx_buf && t->tx_buf)
-+	if (do_rx && do_tx && prepend_len == 0)
- 		msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
--	else if (t->rx_buf)
-+	else if (do_rx)
- 		msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
--	else if (t->tx_buf)
-+	else if (do_tx)
- 		msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
- 
- 	switch (bs->msg_ctl_width) {
-@@ -241,14 +247,41 @@ static unsigned int bcm63xx_txrx_bufs(st
- 
- 	/* Issue the transfer */
- 	cmd = SPI_CMD_START_IMMEDIATE;
--	cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+	cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- 	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
- 	bcm_spi_writew(bs, cmd, SPI_CMD);
- 
- 	/* Enable the CMD_DONE interrupt */
- 	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
- 
--	return t->len - bs->remaining_bytes;
-+	timeout = wait_for_completion_timeout(&bs->done, HZ);
-+	if (!timeout)
-+		return -ETIMEDOUT;
-+
-+	/* read out all data */
-+	rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+	if (do_rx && rx_tail != len)
-+		return -EINVAL;
-+
-+	if (!rx_tail)
-+		return total_len;
-+
-+	len = 0;
-+	t = first;
-+	/* Read out all the data */
-+	for (i = 0; i < n_transfers; i++) {
-+		if (t->rx_buf)
-+			memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
-+
-+		if (t != first || prepend_len == 0)
-+			len += t->len;
-+
-+		t = list_entry(t->transfer_list.next, struct spi_transfer,
-+			       transfer_list);
-+	}
-+
-+	return total_len;
- }
- 
- static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
-@@ -273,42 +306,71 @@ static int bcm63xx_spi_transfer_one(stru
- 					struct spi_message *m)
- {
- 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
--	struct spi_transfer *t;
-+	struct spi_transfer *t, *first = NULL;
- 	struct spi_device *spi = m->spi;
- 	int status = 0;
--	unsigned int timeout = 0;
-+	unsigned int n_transfers = 0, total_len = 0;
-+	bool can_use_prepend = false;
- 
-+	/*
-+	 * This SPI controller does not support keeping CS active after a
-+	 * transfer, so we need to combine the transfers into one until we may
-+	 * deassert CS.
-+	 */
- 	list_for_each_entry(t, &m->transfers, transfer_list) {
--		unsigned int len = t->len;
--		u8 rx_tail;
--
- 		status = bcm63xx_spi_check_transfer(spi, t);
- 		if (status < 0)
- 			goto exit;
- 
--		/* configure adapter for a new transfer */
--		bcm63xx_spi_setup_transfer(spi, t);
-+		if (!first)
-+			first = t;
- 
--		while (len) {
--			/* send the data */
--			len -= bcm63xx_txrx_bufs(spi, t);
--
--			timeout = wait_for_completion_timeout(&bs->done, HZ);
--			if (!timeout) {
--				status = -ETIMEDOUT;
--				goto exit;
--			}
-+		n_transfers++;
-+		total_len += t->len;
-+
-+		if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
-+		    first->len <= BCM63XX_SPI_MAX_PREPEND)
-+			can_use_prepend = true;
-+		else if (can_use_prepend && t->tx_buf)
-+			can_use_prepend = false;
-+
-+		if ((can_use_prepend &&
-+		     total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
-+		    (!can_use_prepend && total_len > bs->fifo_size)) {
-+			status = -EINVAL;
-+			goto exit;
-+		}
- 
--			/* read out all data */
--			rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+		/* all transfers have to be made at the same speed */
-+		if (t->speed_hz != first->speed_hz) {
-+			status = -EINVAL;
-+			goto exit;
-+		}
- 
--			/* Read out all the data */
--			if (rx_tail)
--				memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+		/* CS will be deasserted directly after the transfer */
-+		if (t->delay_usecs) {
-+			status = -EINVAL;
-+			goto exit;
- 		}
- 
--		m->actual_length += t->len;
-+		if (t->cs_change ||
-+		    list_is_last(&t->transfer_list, &m->transfers)) {
-+			/* configure adapter for a new transfer */
-+			bcm63xx_spi_setup_transfer(spi, first);
-+
-+			status = bcm63xx_txrx_bufs(spi, first, n_transfers);
-+			if (status < 0)
-+				goto exit;
-+
-+			m->actual_length += status;
-+			first = NULL;
-+			status = 0;
-+			n_transfers = 0;
-+			total_len = 0;
-+			can_use_prepend = false;
-+		}
- 	}
-+
- exit:
- 	m->status = status;
- 	spi_finalize_current_message(master);