brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 114 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/566-board_A4001N.patch b/target/linux/brcm63xx/patches-3.18/566-board_A4001N.patch
new file mode 100644
index 0000000000..2873c53f31
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/566-board_A4001N.patch
@@ -0,0 +1,114 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -605,6 +605,95 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_A4001N = {
++	.name				= "96328dg2x2",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "A4001N:green:power",
++			.gpio		= 8,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "A4001N:red:power",
++			.gpio		= 4,
++		},
++		{
++			.name		= "A4001N:red:inet",
++			.gpio		= 1,
++		},
++		{
++			.name		= "A4001N:green:usb",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "A4001N:green:dsl",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 23,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 24,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43225,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++	},
++};
++
+ static struct board_info __initdata board_A4001N1 = {
+ 	.name					= "963281T_TEF",
+ 	.expected_cpu_id			= 0x6328,
+@@ -4929,6 +5018,7 @@ static const struct board_info __initcon
+ 	&board_AR5381u,
+ 	&board_AR5387un,
+ 	&board_963281TAN,
++	&board_A4001N,
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+ 	&board_FAST2704V2,
+@@ -5013,6 +5103,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++	{ .compatible = "adb,a4001n", .data = &board_A4001N, },
+ 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },