brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461

1 files changed, 135 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/562-board_VR-3025u.patch b/target/linux/brcm63xx/patches-3.18/562-board_VR-3025u.patch
new file mode 100644
index 0000000000..d640315ea6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/562-board_VR-3025u.patch
@@ -0,0 +1,135 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4145,6 +4145,116 @@ static struct board_info __initdata boar
+ 	.has_ehci0 = 1,
+ };
+ 
++static struct sprom_fixup __initdata vr3025u_fixups[] = {
++	{ .offset = 97, .value = 0xfeb3 },
++	{ .offset = 98, .value = 0x1618 },
++	{ .offset = 99, .value = 0xfab0 },
++	{ .offset = 113, .value = 0xfed1 },
++	{ .offset = 114, .value = 0x1609 },
++	{ .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025u = {
++	.name					= "96368M-1541N",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.use_fallback_sprom			= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++
++	.has_enetsw				= 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "port1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "port2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "port3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "VR-3025u:green:dsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025u:green:inet",
++			.gpio		= 5,
++		},
++		{
++			.name		= "VR-3025u:green:lan1",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025u:green:lan2",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025u:green:lan3",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025u:green:lan4",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VR-3025u:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "VR-3025u:red:power",
++			.gpio		= 24,
++		},
++		{
++			.name		= "VR-3025u:red:inet",
++			.gpio		= 31,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 34,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low		= 1,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43222,
++		.pci_bus			= 0,
++		.pci_dev			= 1,
++		.board_fixups			= vr3025u_fixups,
++		.num_board_fixups		= ARRAY_SIZE(vr3025u_fixups),
++	},
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+ 	.alias = "eth0",
+ };
+@@ -4634,6 +4744,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
++	&board_VR3025u,
+ 	&board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -4708,6 +4819,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+ 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++	{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ 	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268