brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 144 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch
new file mode 100644
index 0000000000..889b8c8560
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch
@@ -0,0 +1,144 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -13,6 +13,7 @@
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
+ #include <linux/pci_ids.h>
++#include <linux/platform_data/b53.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+@@ -4143,6 +4144,117 @@ static struct board_info __initdata boar
+ 	.has_ohci0 = 1,
+ 	.has_ehci0 = 1,
+ };
++
++static struct b53_platform_data WAP5813n_b53_pdata = {
++	.alias = "eth0",
++};
++
++static struct spi_board_info WAP5813n_spi_devices[] = {
++	{
++		.modalias = "b53-switch",
++		.max_speed_hz = 781000,
++		.bus_num = 0,
++		.chip_select = 0,
++		.platform_data = &WAP5813n_b53_pdata,
++	}
++};
++
++static struct sprom_fixup __initdata wap5813n_fixups[] = {
++	{ .offset = 97, .value = 0xfeed },
++	{ .offset = 98, .value = 0x15d1 },
++	{ .offset = 99, .value = 0xfb0d },
++	{ .offset = 113, .value = 0xfef7 },
++	{ .offset = 114, .value = 0x15f7 },
++	{ .offset = 115, .value = 0xfb1a },
++};
++
++static struct board_info __initdata board_WAP5813n = {
++	.name				= "96369R-1231N",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++
++	.has_enetsw			= 1,
++	.enetsw = {
++		.used_ports = {
++			[4] = {
++				.used = 1,
++				.phy_id = 0xff,
++				.bypass_link = 1,
++				.force_speed = 1000,
++				.force_duplex_full = 1,
++				.name = "RGMII",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "WAP-5813n:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "WAP-5813n:red:power",
++			.gpio		= 24,
++		},
++		{
++			.name		= "WAP-5813n:green:inet",
++			.gpio		= 5,
++		},
++		{
++			.name		= "WAP-5813n:red:inet",
++			.gpio		= 31,
++		},
++		{
++			.name		= "WAP-5813n:green:wps",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "wlan",
++			.gpio		= 32,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WLAN,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 35,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43222,
++		.pci_bus			= 0,
++		.pci_dev			= 1,
++		.board_fixups			= wap5813n_fixups,
++		.num_board_fixups		= ARRAY_SIZE(wap5813n_fixups),
++	},
++
++	.spis = WAP5813n_spi_devices,
++	.num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
++};
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ 
+ /*
+@@ -4522,6 +4634,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
++	&board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ 	&board_963268bu_p300,
+@@ -4595,6 +4708,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+ 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++	{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ 	{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },