brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461

1 files changed, 102 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.18/508-board_hw553.patch
new file mode 100644
index 0000000000..0dc43c19be
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/508-board_hw553.patch
@@ -0,0 +1,102 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1458,6 +1458,83 @@ static struct board_info __initdata boar
+ 	.spis = nb4_spi_devices,
+ 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++static struct board_info __initdata board_HW553 = {
++	.name                           = "HW553",
++	.expected_cpu_id                = 0x6358,
++
++	.has_uart0			= 1,
++
++	.has_enet1                      = 1,
++	.has_pci                        = 1,
++	.use_fallback_sprom		= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100        = 1,
++		.force_duplex_full      = 1,
++	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "HW553:red:adsl",
++			.gpio		= 34,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:adsl",
++			.gpio		= 35,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:lan",
++			.gpio		= 22,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:lan",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:power",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:power",
++			.gpio		= 4,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "HW553:red:wifi",
++			.gpio		= 25,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:hspa",
++			.gpio		= 12,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:hspa",
++			.gpio		= 13,
++			.active_low	= 1,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM4318,
++		.pci_bus			= 0,
++		.pci_dev			= 1,
++	},
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ 
+ /*
+@@ -1503,6 +1580,7 @@ static const struct board_info __initcon
+ 	&board_dsl_274xb_rev_c,
+ 	&board_nb4_ser_r0,
+ 	&board_nb4_fxc_r1,
++	&board_HW553,
+ #endif
+ };
+ 
+@@ -1539,6 +1617,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
+ 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+ 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++	{ .compatible = "huawei,hg553", .data = &board_HW553, },
+ 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+ 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+ 	{ .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },