brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380

1 files changed, 63 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644
index 0000000000..2b19600776
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
@@ -0,0 +1,63 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
+ 	}
+ }
+ 
++#define HSSPI_FLASH_CTRL_REG		0x14
++#define FLASH_CTRL_READ_OPCODE_MASK	0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK	(0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2		(0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3		(1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4		(2 << 8)
++#define FLASH_CTRL_MB_EN		(1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+ 	flash_type = bcm63xx_detect_flash_type();
++
++	/* reduce flash mapping to single i/o reads for safety */
++	if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++	    (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++	     BCMCPU_IS_63268())) {
++		u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++		if (!(val & FLASH_CTRL_MB_EN))
++			return;
++
++		val &= ~FLASH_CTRL_MB_EN;
++		val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++
++		switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++		case FLASH_CTRL_ADDR_BYTES_3:
++			val |= 0x0b; /* OPCODE_FAST_READ */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_4:
++			val |= 0x0c; /* OPCODE_FAST_READ_4B */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_2:
++		default:
++			pr_warn("unsupported address byte mode (%x), not fixing up\n",
++				val & FLASH_CTRL_ADDR_BYTES_MASK);
++			return;
++		}
++
++		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++	}
+ }
+ 
+ int __init bcm63xx_flash_register(void)