brcm63xx: fix spi flash setup on (at least) some reference boards

CFE seems to leave the SPI flash mapping in an invalid state after
loading the kernel on some reference boards, so fix it up on boot.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39273

1 files changed, 63 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.10/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644
index 0000000000..2b19600776
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
@@ -0,0 +1,63 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
+ 	}
+ }
+ 
++#define HSSPI_FLASH_CTRL_REG		0x14
++#define FLASH_CTRL_READ_OPCODE_MASK	0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK	(0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2		(0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3		(1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4		(2 << 8)
++#define FLASH_CTRL_MB_EN		(1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+ 	flash_type = bcm63xx_detect_flash_type();
++
++	/* reduce flash mapping to single i/o reads for safety */
++	if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++	    (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++	     BCMCPU_IS_63268())) {
++		u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++		if (!(val & FLASH_CTRL_MB_EN))
++			return;
++
++		val &= ~FLASH_CTRL_MB_EN;
++		val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++
++		switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++		case FLASH_CTRL_ADDR_BYTES_3:
++			val |= 0x0b; /* OPCODE_FAST_READ */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_4:
++			val |= 0x0c; /* OPCODE_FAST_READ_4B */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_2:
++		default:
++			pr_warn("unsupported address byte mode (%x), not fixing up\n",
++				val & FLASH_CTRL_ADDR_BYTES_MASK);
++			return;
++		}
++
++		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++	}
+ }
+ 
+ int __init bcm63xx_flash_register(void)