Delete old brcm63xx files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73

33 files changed, 0 insertions, 6081 deletions

diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/Makefile b/target/linux/brcm63xx/files/arch/mips/bcm963xx/Makefile
deleted file mode 100644
index a9d1e55979..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel
-#
-# Copyright (C) 2004 Broadcom Corporation
-#
-obj-y           := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o wdt.o
-
-SRCBASE         := $(TOPDIR)
-EXTRA_CFLAGS    += -I$(SRCBASE)/include
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/info.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/info.c
deleted file mode 100644
index d50b601e22..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/info.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * $Id$
- *
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/string.h>
-#include <asm/mach-bcm963xx/bootloaders.h>
-
-static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
-        [BOOT_LOADER_UNKNOWN]   = "Unknown",
-        [BOOT_LOADER_CFE]       = "CFE",
-        [BOOT_LOADER_REDBOOT]	= "RedBoot",
-	[BOOT_LOADER_CFE2]	= "CFEv2"
-};
-
-/* boot loaders specific definitions */
-#define CFE_EPTSEAL	0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
-
-int boot_loader_type;
-/*
- * Boot loader detection routines
- */
-static int __init detect_cfe(void)
-{
-	/*
-	 * This method only works, when we are booted directly from the CFE.
-	 */
-	uint32_t cfe_handle = (uint32_t) fw_arg0;
-	uint32_t cfe_a1_val = (uint32_t) fw_arg1;
-	uint32_t cfe_entry = (uint32_t) fw_arg2;
-	uint32_t cfe_seal = (uint32_t) fw_arg3;
-
-	/* Check for CFE by finding the CFE magic number */
-	if (cfe_seal != CFE_EPTSEAL)
-		/* We are not booted from CFE */
-		return 0;
-
-	/* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
-	if (cfe_a1_val != 0)
-		return 0;
-
-	/* The cfe_handle, and the cfe_entry must be kernel mode addresses */
-	if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
-		return 0;
-
-	return 1;
-}
-
-static int __init detect_redboot(void)
-{
-	/* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */
-	if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19))
-		return 1;
-	return 0;
-}
-
-void __init detect_bootloader(void)
-{
-	if (detect_cfe()) {
-		boot_loader_type = BOOT_LOADER_CFE;
-	}
-
-	if (detect_redboot()) {
-		boot_loader_type = BOOT_LOADER_REDBOOT;
-	}
-	else {
-		/* Some devices are using CFE, but it is not detected as is */
-		boot_loader_type = BOOT_LOADER_CFE2;
-	}
-	printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]);
-}
-
-void __init detect_board(void)
-{
-	switch (boot_loader_type)
-	{
-		case BOOT_LOADER_CFE:
-			break;
-		case BOOT_LOADER_REDBOOT:
-			break;
-		default:
-			break;
-	}
-}
-
-EXPORT_SYMBOL(boot_loader_type);
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/int-handler.S b/target/linux/brcm63xx/files/arch/mips/bcm963xx/int-handler.S
deleted file mode 100644
index a7a9c9d20c..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/int-handler.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/*
- * Generic interrupt handler for Broadcom MIPS boards
- */
-
-#include <linux/autoconf.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
- *             3        Hardware
- *             4        Hardware
- *             5        Hardware
- *             6        Hardware
- *             7        R4k timer
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(brcmIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	noreorder
-	.set	at
-
-	jal		plat_irq_dispatch
-	move	a0, sp
-
-	j	ret_from_irq
-	nop
-		
-	END(brcmIRQ)
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/irq.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/irq.c
deleted file mode 100644
index 62a848bd7d..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/irq.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/*
- * Interrupt control functions for Broadcom 963xx MIPS boards
- */
-
-#include <asm/atomic.h>
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/signal.h>
-#include <6348_map_part.h>
-#include <6348_intr.h>
-#include <bcm_map_part.h>
-#include <bcm_intr.h>
-
-static void irq_dispatch_int(void)
-{
-	unsigned int pendingIrqs;
-	static unsigned int irqBit;
-	static unsigned int isrNumber = 31;
-
-	pendingIrqs = PERF->IrqStatus & PERF->IrqMask;
-	if (!pendingIrqs) {
-		return;
-	}
-
-	while (1) {
-	irqBit <<= 1;
-	isrNumber++;
-	if (isrNumber == 32) {
-		isrNumber = 0;
-		irqBit = 0x1;
-	}
-	if (pendingIrqs & irqBit) {
-			PERF->IrqMask &= ~irqBit; // mask
-			do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET);
-		break;
-	}
-	}
-}
-
-static void irq_dispatch_ext(uint32 irq)
-{
-	if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) {
-	printk("**** Ext IRQ mask. Should not dispatch ****\n");
-	}
-	/* disable and clear interrupt in the controller */
-	PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
-	PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-	do_IRQ(irq);
-}
-
-
-//extern void brcm_timer_interrupt(struct pt_regs *regs);
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long cause;
-
-	cause = read_c0_status() & read_c0_cause() & ST0_IM;
-	if (cause & CAUSEF_IP7)
-		do_IRQ(7);
-	else if (cause & CAUSEF_IP2)
-		irq_dispatch_int();
-	else if (cause & CAUSEF_IP3)
-		irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0);
-	else if (cause & CAUSEF_IP4)
-		irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1);
-	else if (cause & CAUSEF_IP5)
-		irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2);
-	else if (cause & CAUSEF_IP6) {
-		irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3);
-		local_irq_disable();
-	}
-}
-
-
-void enable_brcm_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
-	PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
-	}
-	else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
-	/* enable and clear interrupt in the controller */
-	PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));
-	PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-	}
-	local_irq_restore(flags);
-}
-
-void disable_brcm_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if( irq >= INTERNAL_ISR_TABLE_OFFSET ) {
-	PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET));
-	}
-	else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) {
-	/* disable interrupt in the controller */
-	PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));
-	}
-	local_irq_restore(flags);
-}
-
-void ack_brcm_irq(unsigned int irq)
-{
-	/* Already done in brcm_irq_dispatch */
-}
-
-unsigned int startup_brcm_irq(unsigned int irq)
-{
-	enable_brcm_irq(irq);
-
-	return 0; /* never anything pending */
-}
-
-unsigned int startup_brcm_none(unsigned int irq)
-{
-	return 0;
-}
-
-void end_brcm_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_brcm_irq(irq);
-}
-
-void end_brcm_none(unsigned int irq)
-{
-}
-
-static struct hw_interrupt_type brcm_irq_type = {
-	.typename	= "MIPS",
-	.startup	= startup_brcm_irq,
-	.shutdown	= disable_brcm_irq,
-	.enable	= enable_brcm_irq,
-	.disable	= disable_brcm_irq,
-	.ack	= ack_brcm_irq,
-	.end	= end_brcm_irq,
-	.set_affinity = NULL
-};
-
-static struct hw_interrupt_type brcm_irq_no_end_type = {
-	.typename	= "MIPS",
-	.startup	= startup_brcm_none,
-	.shutdown	= disable_brcm_irq,
-	.enable	= enable_brcm_irq,
-	.disable	= disable_brcm_irq,
-	.ack	= ack_brcm_irq,
-	.end	= end_brcm_none,
-	.set_affinity = NULL
-};
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	clear_c0_status(ST0_BEV);
-	change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4));
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = 0;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &brcm_irq_type;
-	}
-}
-
-int request_external_irq(unsigned int irq, 
-	FN_HANDLER handler,
-		unsigned long irqflags, 
-		const char * devname,
-		void *dev_id)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT));      // Clear
-	PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT));      // Mask
-	PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT));    // Edge insesnsitive
-	PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT));      // Level triggered
-	PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT));     // Low level
-
-	local_irq_restore(flags);
-
-	return( request_irq(irq, handler, irqflags, devname, dev_id) );
-}
-
-/* VxWorks compatibility function(s). */
-
-unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param,
-	unsigned int interruptId)
-{
-	int nRet = -1;
-	char *devname;
-
-	devname = kmalloc(16, GFP_KERNEL);
-	if (devname)
-		sprintf( devname, "brcm_%d", interruptId );
-
-	/* Set the IRQ description to not automatically enable the interrupt at
-	 * the end of an ISR.  The driver that handles the interrupt must
-	 * explicitly call BcmHalInterruptEnable or enable_brcm_irq.  This behavior
-	 * is consistent with interrupt handling on VxWorks.
-	 */
-	irq_desc[interruptId].chip = &brcm_irq_no_end_type;
-
-	if( interruptId >= INTERNAL_ISR_TABLE_OFFSET )
-	{	
-		printk("BcmHalMapInterrupt : internal IRQ\n");
-		nRet = request_irq( interruptId, pfunc, IRQF_DISABLED, devname, (void *) param );
-	}
-	else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3)
-	{
-		printk("BcmHalMapInterrupt : external IRQ\n");
-		nRet = request_external_irq( interruptId, pfunc, IRQF_DISABLED, devname, (void *) param );
-	}
-
-	return( nRet );
-}
-
-
-EXPORT_SYMBOL(enable_brcm_irq);
-EXPORT_SYMBOL(disable_brcm_irq);
-EXPORT_SYMBOL(request_external_irq);
-EXPORT_SYMBOL(BcmHalMapInterrupt);
-
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/prom.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/prom.c
deleted file mode 100644
index 5ebadc6679..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/prom.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- Copyright 2004 Broadcom Corp. All Rights Reserved.
- Copyright 2007 OpenWrt,org, Florian Fainelli <florian@openwrt.org>
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-*/
-/*
- * prom.c: PROM library initialization code.
- *
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/mach-bcm963xx/bootloaders.h>
-#include <asm/mach-bcm963xx/6348_map_part.h>
-
-#include "../cfe/cfe_private.h"
-
-extern void __init detect_bootloader(void); 
-extern void serial_init(void);
-extern int boot_loader_type;
-
-#define MACH_BCM                    MACH_BCM96348
-
-const char *get_system_type(void)
-{
-	return "Broadcom BCM963xx";
-}
-
-void __init prom_init(void)
-{
-    	serial_init();
-
-    	printk("%s prom init\n", get_system_type() );
-
-    	PERF->IrqMask = 0;
-	
-	/* Detect the bootloader */
-	detect_bootloader();
-
-	/* Register 16MB RAM minus the ADSL SDRAM by default */
-	add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-
-}
-
-void __init prom_free_prom_memory(void)
-{
-	/* We do not have any memory to free */
-}
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/ser_init.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/ser_init.c
deleted file mode 100644
index bb745aec6e..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/ser_init.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/*
- *  Broadcom bcm63xx serial port initialization, also prepare for printk
- *  by registering with console_init
- *   
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/console.h>
-#include <linux/sched.h>
-
-#include <asm/addrspace.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/mc146818rtc.h> 
-
-#include <bcm_map_part.h>
-#include <6348_map_part.h>
-#include <board.h>
-
-#define  SER63XX_DEFAULT_BAUD      115200
-#define BD_BCM63XX_TIMER_CLOCK_INPUT    (FPERIPH)
-#define stUart ((volatile Uart * const) UART_BASE)
-
-// Transmit interrupts
-#define TXINT       (TXFIFOEMT | TXUNDERR | TXOVFERR)
-// Receive interrupts
-#define RXINT       (RXFIFONE | RXOVFERR)
-
-/* --------------------------------------------------------------------------
-    Name: serial_init
- Purpose: Initalize the UART
--------------------------------------------------------------------------- */
-void __init serial_init(void)
-{
-    u32 tmpVal = SER63XX_DEFAULT_BAUD;
-    ULONG clockFreqHz;    
-
-#if defined(CONFIG_BCM96345)
-    // Make sure clock is ticking
-    PERF->blkEnables |= UART_CLK_EN;
-#endif
-		
-    /* Dissable channel's receiver and transmitter.                */
-    stUart->control &= ~(BRGEN|TXEN|RXEN);
-		
-    /*--------------------------------------------------------------------*/
-    /* Write the table value to the clock select register.                */
-    /* DPullen - this is the equation to use:                             */
-    /*       value = clockFreqHz / baud / 32-1;                           */
-    /*   (snmod) Actually you should also take into account any necessary */
-    /*           rounding.  Divide by 16, look at lsb, if 0, divide by 2  */
-    /*           and subtract 1.  If 1, just divide by 2                  */
-    /*--------------------------------------------------------------------*/
-    clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
-    tmpVal = (clockFreqHz / tmpVal) / 16;
-    if( tmpVal & 0x01 )
-        tmpVal /= 2;  //Rounding up, so sub is already accounted for
-    else
-        tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1
-    stUart->baudword = tmpVal;
-        
-    /* Finally, re-enable the transmitter and receiver.            */
-    stUart->control |= (BRGEN|TXEN|RXEN);
-
-    stUart->config   = (BITS8SYM | ONESTOP);
-    // Set the FIFO interrupt depth ... stUart->fifocfg  = 0xAA;
-    stUart->fifoctl  =  RSTTXFIFOS | RSTRXFIFOS;
-    stUart->intMask  = 0;       
-    stUart->intMask = RXINT | TXINT;
-}
-
-
-/* prom_putc()
- * Output a character to the UART
- */
-void prom_putc(char c)
-{
-	/* Wait for Tx uffer to empty */
-	while (! (READ16(stUart->intStatus) & TXFIFOEMT));
-	/* Send character */
-	stUart->Data = c;
-}
-
-/* prom_puts()
- * Write a string to the UART
- */
-void prom_puts(const char *s)
-{
-	while (*s) {
-		if (*s == '\n') {
-			prom_putc('\r');
-		}
-		prom_putc(*s++);
-	}
-}
-
-
-/* prom_getc_nowait()
- * Returns a character from the UART
- * Returns -1 if no characters available or corrupted
- */
-int prom_getc_nowait(void)
-{
-    uint16  uStatus;
-    int    cData = -1;
-
-     uStatus = READ16(stUart->intStatus);
-
-     if (uStatus & RXFIFONE) { /* Do we have a character? */
-           cData =  READ16(stUart->Data) & 0xff; /* Read character */
-           if (uStatus & (RXFRAMERR | RXPARERR)) {  /* If we got an error, throw it away */
-               cData = -1;
-           }
-  }
-
-   return cData;
-}
-
-/* prom_getc()
- * Returns a charcter from the serial port
- * Will block until it receives a valid character
-*/
-char prom_getc(void)
-{
-    int    cData = -1;
-
-    /* Loop until we get a valid character */
-    while(cData == -1) {
-	cData = prom_getc_nowait();
-    }
-   return (char) cData;
-}
-
-/* prom_testc()
- * Returns 0 if no characters available
- */
-int prom_testc(void)
-{
-    uint16  uStatus;
-
-     uStatus = READ16(stUart->intStatus);
-
-     return (uStatus & RXFIFONE);
-}
-
-#if defined (CONFIG_REMOTE_DEBUG)
-/* Prevent other code from writing to the serial port */
-void _putc(char c) { }
-void _puts(const char *ptr) { }
-#else
-/* Low level outputs call prom routines */
-void _putc(char c) {
-	prom_putc(c);
-}
-void _puts(const char *ptr) {
-	prom_puts(ptr);
-}
-#endif
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c
deleted file mode 100644
index 58472783f4..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/*
- * Generic setup routines for Broadcom 963xx MIPS boards
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/console.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/mach-bcm963xx/bootloaders.h>
-
-extern void brcm_time_init(void);
-extern int boot_loader_type;
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <bcm_map_part.h>
-#include <6348_map_part.h>
-#include <bcmpci.h>
-
-static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-
-/* This function should be in a board specific directory.  For now,
- * assume that all boards that include this file use a Broadcom chip
- * with a soft reset bit in the PLL control register.
- */
-static void brcm_machine_restart(char *command)
-{
-	const unsigned long ulSoftReset = 0x00000001;
-	unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
-	*pulPllCtrl |= ulSoftReset;
-}
-
-static void brcm_machine_halt(void)
-{
-	printk("System halted\n");
-	while (1);
-}
-
-static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value)
-{
-    /* write index then value */
-    mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
-    mpi->pcicfgdata = value;
-}
-
-static uint32 mpi_GetLocalPciConfigReg(uint32 reg)
-{
-    /* write index then get value */
-    mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;;
-    return mpi->pcicfgdata;
-}
-
-/*
- * mpi_ResetPcCard: Set/Reset the PcCard
- */
-static void mpi_ResetPcCard(int cardtype, BOOL bReset)
-{
-    if (cardtype == MPI_CARDTYPE_NONE) {
-        return;
-    }
-
-    if (cardtype == MPI_CARDTYPE_CARDBUS) {
-        bReset = ! bReset;
-    }
-
-    if (bReset) {
-        mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
-    } else {
-        mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET);
-    }
-}
-
-/*
- * mpi_ConfigCs: Configure an MPI/EBI chip select
- */
-static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags)
-{
-    mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size);
-    mpi->cs[cs].config = flags;
-}
-
-/*
- * mpi_InitPcmciaSpace
- */
-static void mpi_InitPcmciaSpace(void)
-{
-    // ChipSelect 4 controls PCMCIA Memory accesses
-    mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
-    // ChipSelect 5 controls PCMCIA Attribute accesses
-    mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE));
-    // ChipSelect 6 controls PCMCIA I/O accesses
-    mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE));
-
-    mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | 
-                         (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | 
-                         (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | 
-                         (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT));
-
-    mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS);
-}
-
-/*
- * cardtype_vcc_detect: PC Card's card detect and voltage sense connection
- * 
- *   CD1#/      CD2#/     VS1#/     VS2#/    Card       Initial Vcc
- *  CCD1#      CCD2#     CVS1      CVS2      Type
- *
- *   GND        GND       open      open     16-bit     5 vdc
- *
- *   GND        GND       GND       open     16-bit     3.3 vdc
- *
- *   GND        GND       open      GND      16-bit     x.x vdc
- *
- *   GND        GND       GND       GND      16-bit     3.3 & x.x vdc
- *
- *====================================================================
- *
- *   CVS1       GND       CCD1#     open     CardBus    3.3 vdc
- *
- *   GND        CVS2      open      CCD2#    CardBus    x.x vdc
- *
- *   GND        CVS1      CCD2#     open     CardBus    y.y vdc
- *
- *   GND        CVS2      GND       CCD2#    CardBus    3.3 & x.x vdc
- *
- *   CVS2       GND       open      CCD1#    CardBus    x.x & y.y vdc
- *
- *   GND        CVS1      CCD2#     open     CardBus    3.3, x.x & y.y vdc
- *
- */
-static int cardtype_vcc_detect(void)
-{
-    uint32 data32;
-    int cardtype;
-
-    cardtype = MPI_CARDTYPE_NONE;
-    mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive
-                                        // the CVS pins to 0.
-    data32 = mpi->pcmcia_cntl1;
-    switch (data32 & 0x00000003)  // Test CD1# and CD2#, see if card is plugged in.
-    {
-    case 0x00000003:  // No Card is in the slot.
-        printk("mpi: No Card is in the PCMCIA slot\n");
-        break;
-
-    case 0x00000002:  // Partial insertion, No CD2#.
-        printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n");
-        break;
-
-    case 0x00000001:  // Partial insertion, No CD1#.
-        printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n");
-        break;
-
-    case 0x00000000:
-        mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and
-                                        // float the CVS pins.
-        mdelay(1);
-        data32 = mpi->pcmcia_cntl1;
-        // Read the Register.
-        switch (data32 & 0x0000000C)  // See what is on the CVS pins.
-        {
-        case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option.
-            printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n");
-            cardtype = MPI_CARDTYPE_PCMCIA;
-            break;
-          
-        case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground.
-                         // 2 valid voltage options.
-        switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
-        {
-            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
-                              // This is not a valid combination.
-                printk("mpi: Unknown card plugged into slot\n"); 
-                break;
-      
-            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2. 
-                mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0.
-                mdelay(1);
-                data32 = mpi->pcmcia_cntl1;
-                if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid.
-                    printk("mpi: Unknown card plugged into slot\n"); 
-                } else {                   // CCD2 is tied to CVS1.
-                    printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n");
-                    cardtype = MPI_CARDTYPE_CARDBUS;
-                }
-                break;
-                
-            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-                             // This is not a valid combination.
-                printk("mpi: Unknown card plugged into slot\n"); 
-                break;
-                
-            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
-                printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n");
-                cardtype = MPI_CARDTYPE_PCMCIA;
-                break;
-            }
-            break;
-          
-        case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground.
-                         // 2 valid voltage options.
-            switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
-            {
-            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
-                              // This is not a valid combination.
-                printk("mpi: Unknown card plugged into slot\n"); 
-                break;
-      
-            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2.
-                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-                mdelay(1);
-                data32 = mpi->pcmcia_cntl1;
-                if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid.
-                    printk("mpi: Unknown card plugged into slot\n"); 
-                } else {// CCD2 is tied to CVS2.
-                    printk("mpi: Detected 3.3 and x.x Cardbus card\n");
-                    cardtype = MPI_CARDTYPE_CARDBUS;
-                }
-                break;
-
-            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-                             // This is not a valid combination.
-                printk("mpi: Unknown card plugged into slot\n"); 
-                break;
-
-            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
-                cardtype = MPI_CARDTYPE_PCMCIA;
-                printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n");
-                break;
-            }
-            break;
-          
-        case 0x0000000C:  // CVS1 and CVS2 are open or tied to CCD1/CCD2.
-                          // 5 valid voltage options.
-      
-            switch (data32 & 0x00000003)  // Test the values of CCD1 and CCD2.
-            {
-            case 0x00000003:  // CCD1 and CCD2 are tied to 1 of the CVS pins.
-                              // This is not a valid combination.
-                printk("mpi: Unknown card plugged into slot\n"); 
-                break;
-      
-            case 0x00000002:  // CCD2 is tied to either CVS1 or CVS2.
-                              // CCD1 is tied to ground.
-                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-                mdelay(1);
-                data32 = mpi->pcmcia_cntl1;
-                if (data32 & 0x00000002) {  // CCD2 is tied to CVS1.
-                    printk("mpi: Detected y.y vdc Cardbus card\n");
-                } else {                    // CCD2 is tied to CVS2.
-                    printk("mpi: Detected x.x vdc Cardbus card\n");
-                }
-                cardtype = MPI_CARDTYPE_CARDBUS;
-                break;
-      
-            case 0x00000001: // CCD1 is tied to either CVS1 or CVS2.
-                             // CCD2 is tied to ground.
-      
-                mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0.
-                mdelay(1);
-                data32 = mpi->pcmcia_cntl1;
-                if (data32 & 0x00000001) {// CCD1 is tied to CVS1.
-                    printk("mpi: Detected 3.3 vdc Cardbus card\n");
-                } else {                    // CCD1 is tied to CVS2.
-                    printk("mpi: Detected x.x and y.y Cardbus card\n");
-                }
-                cardtype = MPI_CARDTYPE_CARDBUS;
-                break;
-      
-            case 0x00000000:  // CCD1 and CCD2 are tied to ground.
-                cardtype = MPI_CARDTYPE_PCMCIA;
-                printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n");
-                break;
-            }
-            break;
-      
-        default:
-            printk("mpi: Unknown card plugged into slot\n"); 
-            break;
-        
-        }
-    }
-    return cardtype;
-}
-
-/*
- * mpi_DetectPcCard: Detect the plugged in PC-Card
- * Return: < 0 => Unknown card detected
- *         0 => No card detected
- *         1 => 16-bit card detected
- *         2 => 32-bit CardBus card detected
- */
-static int mpi_DetectPcCard(void)
-{
-    int cardtype;
-
-    cardtype = cardtype_vcc_detect();
-    switch(cardtype) {
-        case MPI_CARDTYPE_PCMCIA:
-            mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits
-            //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET);
-            mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE);
-            mpi_InitPcmciaSpace();
-            mpi_ResetPcCard(cardtype, FALSE);
-            // Hold card in reset for 10ms
-            mdelay(10);
-            mpi_ResetPcCard(cardtype, TRUE);
-            // Let card come out of reset
-            mdelay(100);
-            break;
-        case MPI_CARDTYPE_CARDBUS:
-            // 8 => CardBus Enable
-            // 1 => PCI Slot Number
-            // C => Float VS1 & VS2
-            mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | 
-                                CARDBUS_ENABLE | 
-                                (CARDBUS_SLOT << 8)| 
-                                VS2_OEN |
-                                VS1_OEN;
-            /* access to this memory window will be to/from CardBus */
-            mpi->l2pmremap1 |= CARDBUS_MEM;
-
-            // Need to reset the Cardbus Card. There's no CardManager to do this, 
-            // and we need to be ready for PCI configuration. 
-            mpi_ResetPcCard(cardtype, FALSE);
-            // Hold card in reset for 10ms
-            mdelay(10);
-            mpi_ResetPcCard(cardtype, TRUE);
-            // Let card come out of reset
-            mdelay(100);
-            break;
-        default:
-            break;
-    }
-    return cardtype;
-}
-
-static int mpi_init(void)
-{
-	unsigned long data;
-    	unsigned int chipid, chiprev, sdramsize;
-
-	printk("Broadcom BCM963xx MPI\n");
-    	chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
-    	chiprev = (PERF->RevID & 0xFF);
-
-	if (boot_loader_type == BOOT_LOADER_CFE)
-    		sdramsize = boot_mem_map.map[0].size;
-	else
-		sdramsize = 0x01000000; 
-    	/*
-     	 * Init the pci interface 
-     	 */
-    	data = GPIO->GPIOMode; // GPIO mode register
-    	data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
-    	GPIO->GPIOMode = data; // PCI internal arbiter
-
-    /*
-     * In the BCM6348 CardBus support is defaulted to Slot 0
-     * because there is no external IDSEL for CardBus.  To disable
-     * the CardBus and allow a standard PCI card in Slot 0 
-     * set the cbus_idsel field to 0x1f.
-    */
-    /*
-    uData = mpi->pcmcia_cntl1;
-    uData |= CARDBUS_IDSEL;
-    mpi->pcmcia_cntl1 = uData;
-    */
-    // Setup PCI I/O Window range. Give 64K to PCI I/O
-    mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1);
-    // UBUS to PCI I/O base address 
-    mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK;
-    // UBUS to PCI I/O Window remap
-    mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN);
-
-    // enable PCI related GPIO pins and data swap between system and PCI bus
-    mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP);
-
-    /* Enable 6348 BusMaster and Memory access mode */
-    data = mpi_GetLocalPciConfigReg(PCI_COMMAND);
-    data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-    mpi_SetLocalPciConfigReg(PCI_COMMAND, data);
-
-    /* Configure two 16 MByte PCI to System memory regions. */
-    /* These memory regions are used when PCI device is a bus master */
-    /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */
-    mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1);
-    mpi->sp0remap = 0x0;
-
-    /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */
-    mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2);
-    mpi->sp1remap = 0x0;
-    mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40);
-
-    if ((chipid == 0x6348) && (chiprev == 0xb0)) {
-        mpi->sp0range = ~(sdramsize-1);
-        mpi->sp1range = ~(sdramsize-1);
-    }
-    /*
-     * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity
-     * by set 0 in bit 8~15.  This resolve read Bcm4306 srom return 0xffff in
-     * first read.
-     */
-    data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER);
-    data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK;
-    data |= 0x00000080;
-    mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data);
-
-    /* enable pci interrupt */
-    mpi->locintstat |= (EXT_PCI_INT << 16);
-
-    mpi_DetectPcCard();
-
-    ioport_resource.start = BCM_PCI_IO_BASE;
-    ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB;
-
-#if defined(CONFIG_USB)
-    PERF->blkEnables |= USBH_CLK_EN;
-    mdelay(100);
-    *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP;
-#endif
-
-    return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-	_machine_restart = brcm_machine_restart;
-	_machine_halt = brcm_machine_halt;
-	pm_power_off = brcm_machine_halt;
-
-	//board_time_init = brcm_time_init;
-
-    	/* mpi initialization */
-    	mpi_init();
-}
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/time.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/time.c
deleted file mode 100644
index fa0fa71a7f..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/time.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
-<:copyright-gpl
- Copyright 2004 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-/*
- * Setup time for Broadcom 963xx MIPS boards
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
-#include <asm/div64.h>
-#include <asm/time.h>
-
-#include <6348_map_part.h>
-#include <6348_intr.h>
-#include <bcm_map_part.h>
-#include <bcm_intr.h>
-
-static unsigned long r4k_offset;	/* Amount to increment compare reg each time */
-static unsigned long r4k_cur;		/* What counter should be at next timer irq */
-
-/*  *********************************************************************
-    *  calculateCpuSpeed()
-    *      Calculate the BCM6348 CPU speed by reading the PLL strap register
-    *      and applying the following formula:
-    *      cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1)
-    *  Input parameters:
-    *      none
-    *  Return value:
-    *      none
-    ********************************************************************* */
-
-static inline unsigned long __init calculateCpuSpeed(void)
-{
-    u32 pllStrap = PERF->PllStrap;
-    int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
-    int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
-    int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
-
-	return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000;
-}
-
-
-static inline unsigned long __init cal_r4koff(void)
-{   
-	mips_hpt_frequency = calculateCpuSpeed() / 2;
-	return (mips_hpt_frequency / HZ);
-}
-
-
-/*
- * There are a lot of conceptually broken versions of the MIPS timer interrupt
- * handler floating around.  This one is rather different, but the algorithm
- * is provably more robust.
- */
-#if 0
-irqreturn_t brcm_timer_interrupt(struct pt_regs *regs)
-{
-	int irq = MIPS_TIMER_INT;
-
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
-
-	timer_interrupt(irq, regs);
-	irq_exit();
-	return IRQ_HANDLED;
-}
-#endif
-
-void __init plat_time_init(void)
-{
-	unsigned int est_freq, flags;
-	local_irq_save(flags);
-
-	printk("calculating r4koff... ");
-	r4k_offset = cal_r4koff();
-	printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset);
-
-	est_freq = 2 * r4k_offset * HZ;
-	est_freq += 5000;   /* round */
-	est_freq -= est_freq % 10000;
-	printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000,
-		   (est_freq % 1000000) * 100 / 1000000);
-	local_irq_restore(flags);
-}
-
-#if 0
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	r4k_cur = (read_c0_count() + r4k_offset);
-	write_c0_compare(r4k_cur);
-	set_c0_status(IE_IRQ5);
-}
-#endif
diff --git a/target/linux/brcm63xx/files/arch/mips/bcm963xx/wdt.c b/target/linux/brcm63xx/files/arch/mips/bcm963xx/wdt.c
deleted file mode 100644
index 0ea36a67f0..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/bcm963xx/wdt.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Watchdog driver for the BCM963xx devices
- * 
- * Copyright (C) 2007 OpenWrt.org
- *			Florian Fainelli <florian@openwrt.org>
- * 
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/notifier.h>
-#include <linux/watchdog.h>
-#include <linux/timer.h>
-#include <linux/jiffies.h>
-#include <linux/completion.h>
-#include <linux/ioport.h>
-
-typedef struct bcm963xx_timer {
-	unsigned short unused0;
-	unsigned char  timer_mask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  	unsigned char  timer_ints;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
- 	unsigned long	timer_ctl0;
-  	unsigned long	timer_ctl1;
-  	unsigned long	timer_ctl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  	unsigned long	timer_cnt0;
-  	unsigned long	timer_cnt1;
-  	unsigned long	timer_cnt2;
-  	unsigned long	wdt_def_count;
-
-  	/* Write 0xff00 0x00ff to Start timer
-   	* Write 0xee00 0x00ee to Stop and re-load default count
-   	* Read from this register returns current watch dog count
-   	*/
-  	unsigned long	wdt_ctl;
-
-  	/* Number of 40-MHz ticks for WD Reset pulse to last */
-  	unsigned long	wdt_rst_count;
-} bcm963xx_timer;
-
-static struct bcm963xx_wdt_device {
-	struct completion stop;
-	volatile int running;
-	struct timer_list timer;
-	volatile int queue;
-	int default_ticks;
-	unsigned long inuse;
-} bcm963xx_wdt_device;
-
-static int ticks = 1000;
-
-#define WDT_BASE	0xfffe0200
-#define WDT 		((volatile bcm963xx_timer * const) WDT_BASE)
-
-#define BCM963XX_INTERVAL        (HZ/10+1)
-
-static void bcm963xx_wdt_trigger(unsigned long unused)
-{
-	if (bcm963xx_wdt_device.running)
-		ticks--;
-
-	/* Load the default ticking value into the reset counter register */	
-	WDT->wdt_rst_count = bcm963xx_wdt_device.default_ticks;
-	
-	if (bcm963xx_wdt_device.queue && ticks) {
-		bcm963xx_wdt_device.timer.expires = jiffies + BCM963XX_INTERVAL;
-		add_timer(&bcm963xx_wdt_device.timer);
-	}
-	else {
-		complete(&bcm963xx_wdt_device.stop);
-	}
-}
-
-static void bcm963xx_wdt_reset(void)
-{
-	ticks = bcm963xx_wdt_device.default_ticks;
-	/* Also reload default count */
-	WDT->wdt_def_count = ticks;
-	WDT->wdt_ctl = 0xee00;
-	WDT->wdt_ctl = 0x00ee;
-}
-
-static void bcm963xx_wdt_start(void)
-{
-	if (!bcm963xx_wdt_device.queue) {
-		bcm963xx_wdt_device.queue;
-		/* Enable the watchdog by writing 0xff00 ,then 0x00ff to the control register */
-		WDT->wdt_ctl = 0xff00;
-		WDT->wdt_ctl = 0x00ff;
-		bcm963xx_wdt_device.timer.expires = jiffies + BCM963XX_INTERVAL;
-		add_timer(&bcm963xx_wdt_device.timer);
-	}
-	bcm963xx_wdt_device.running++;
-}
-
-static int bcm963xx_wdt_stop(void)
-{
-	if (bcm963xx_wdt_device.running)
-		bcm963xx_wdt_device.running = 0;
-	
-	ticks = bcm963xx_wdt_device.default_ticks;
-
-	/* Stop the watchdog by writing 0xee00 then 0x00ee to the control register */
-	WDT->wdt_ctl = 0xee00;
-	WDT->wdt_ctl = 0x00ee;
-
-	return -EIO;
-}
-
-static int bcm963xx_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &bcm963xx_wdt_device.inuse))
-		return -EBUSY;
-	return nonseekable_open(inode, file);
-}
-
-static int bcm963xx_wdt_release(struct inode *inode, struct file *file)
-{
-	clear_bit(0, &bcm963xx_wdt_device.inuse);
-	return 0;
-}
-
-static int bcm963xx_wdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	unsigned int value;
-
-	static struct watchdog_info ident = {
-		.options = WDIOF_CARDRESET,
-		.identity = "BCM963xx WDT",
-	};
-
-	switch (cmd) {
-		case WDIOC_KEEPALIVE:
-			bcm963xx_wdt_reset();
-			break;
-		case WDIOC_GETSTATUS:
-			/* Reading from the control register will return the current value */
-			value = WDT->wdt_ctl;
-			if ( copy_to_user(argp, &value, sizeof(int)) )
-				return -EFAULT;
-			break;
-		case WDIOC_GETSUPPORT:
-			if ( copy_to_user(argp, &ident, sizeof(ident)) )
-				return -EFAULT;
-			break;
-		case WDIOC_SETOPTIONS:
-			if ( copy_from_user(&value, argp, sizeof(int)) )
-				return -EFAULT;
-			switch(value) {
-				case WDIOS_ENABLECARD:
-					bcm963xx_wdt_start();
-					break;
-				case WDIOS_DISABLECARD:
-					bcm963xx_wdt_stop();
-					break;
-				default:
-					return -EINVAL;
-			}
-			break;
-		default:
-			return -ENOTTY;
-	}
-	return 0;		
-}
-
-static int bcm963xx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
-{
-	if (!count)
-		return -EIO;
-	bcm963xx_wdt_reset();
-	return count;
-}
-
-static const struct file_operations bcm963xx_wdt_fops = {
-	.owner 		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= bcm963xx_wdt_write,
-	.ioctl		= bcm963xx_wdt_ioctl,
-	.open		= bcm963xx_wdt_open,
-	.release 	= bcm963xx_wdt_release,
-};	
-
-static struct miscdevice bcm963xx_wdt_miscdev = {
-	.minor 	= WATCHDOG_MINOR,
-	.name 	= "watchdog",
-	.fops	= &bcm963xx_wdt_fops,
-};
-
-static void __exit bcm963xx_wdt_exit(void)
-{
-	if (bcm963xx_wdt_device.queue ){
-		bcm963xx_wdt_device.queue = 0;
-		wait_for_completion(&bcm963xx_wdt_device.stop);
-	}	
-	misc_deregister(&bcm963xx_wdt_miscdev);
-}
-
-static int __init bcm963xx_wdt_init(void)
-{
-	int ret = 0;
-	
-	printk("Broadcom BCM963xx Watchdog timer\n");
-
-	ret = misc_register(&bcm963xx_wdt_miscdev);
-	if (ret) {
-		printk(KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret);
-		return ret;
-	}
-	init_completion(&bcm963xx_wdt_device.stop);
-	bcm963xx_wdt_device.queue = 0;
-	
-	clear_bit(0, &bcm963xx_wdt_device.inuse);
-	
-	init_timer(&bcm963xx_wdt_device.timer);
-	bcm963xx_wdt_device.timer.function = bcm963xx_wdt_trigger;
-	bcm963xx_wdt_device.timer.data = 0;
-
-	bcm963xx_wdt_device.default_ticks = ticks;	
-	return ret;
-}
-
-	
-module_init(bcm963xx_wdt_init);
-module_exit(bcm963xx_wdt_exit);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("Broadcom BCM963xx Watchdog driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/files/arch/mips/cfe/Makefile b/target/linux/brcm63xx/files/arch/mips/cfe/Makefile
deleted file mode 100644
index d9f046adf3..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/cfe/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Broadcom Common Firmware Environment support
-#
-
-obj-y += cfe.o
diff --git a/target/linux/brcm63xx/files/arch/mips/cfe/cfe.c b/target/linux/brcm63xx/files/arch/mips/cfe/cfe.c
deleted file mode 100644
index 6d16111e1c..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/cfe/cfe.c
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <asm/cfe.h>
-
-#include "cfe_private.h"
-
-
-static cfe_uint_t cfe_handle;
-static int (*cfe_trampoline)(long handle, long iocb);
-
-
-#include <linux/kernel.h>
-
-void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
-		      unsigned long fwarg2, unsigned long fwarg3)
-{
-	if (fwarg3 == 0x80300000) {
-		/* WRT54G workaround */
-		fwarg3 = CFE_EPTSEAL;
-		fwarg2 = 0xBFC00500;
-	}
-	if (fwarg3 != CFE_EPTSEAL) {
-		/* We are not booted from CFE */
-		return;
-	}
-	if (fwarg1 == 0) {
-		/* We are on the boot CPU */
-		cfe_handle = (cfe_uint_t)fwarg0;
-		cfe_trampoline = CFE_TO_PTR(fwarg2);
-	}
-}
-
-int cfe_vprintk(const char *fmt, va_list args)
-{
-	static char buffer[1024];
-	static DEFINE_SPINLOCK(lock);
-	static const char pfx[] = "CFE-console: ";
-	static const size_t pfx_len = sizeof(pfx) - 1;
-	unsigned long flags;
-	int len, cnt, pos;
-	int handle;
-	int res;
-
-	if (!cfe_present())
-		return -ENODEV;
-
-	spin_lock_irqsave(&lock, flags);
-	handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-	if (CFE_ISERR(handle)) {
-		len = -EIO;
-		goto out;
-	}
-	strcpy(buffer, pfx);
-	len = vscnprintf(buffer + pfx_len,
-			 sizeof(buffer) - pfx_len - 2,
-			 fmt, args);
-	len += pfx_len;
-	/* The CFE console requires CR-LF line-ends.
-	 * Add a CR, if we only terminate lines with a LF.
-	 * This does only fix CR-LF at the end of the string.
-	 * So for multiple lines, use multiple cfe_vprintk calls.
-	 */
-	if (len > 1 &&
-	    buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
-		buffer[len - 1] = '\r';
-		buffer[len] = '\n';
-		len += 1;
-	}
-	cnt = len;
-	pos = 0;
-	while (cnt > 0) {
-		res = cfe_write(handle, buffer + pos, len - pos);
-		if (CFE_ISERR(res)) {
-			len = -EIO;
-			goto out;
-		}
-		cnt -= res;
-		pos += res;
-	}
-out:
-	spin_unlock_irqrestore(&lock, flags);
-
-	return len;
-}
-
-int cfe_printk(const char *fmt, ...)
-{
-	va_list args;
-	int res;
-
-	va_start(args, fmt);
-	res = cfe_vprintk(fmt, args);
-	va_end(args);
-
-	return res;
-}
-
-static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
-{
-	if (!cfe_present())
-		return CFE_ERR_UNSUPPORTED;
-	return cfe_trampoline((long)cfe_handle, (long)iocb);
-}
-
-int cfe_present(void)
-{
-	return (cfe_trampoline != NULL);
-}
-
-int cfe_close(int handle)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_CLOSE;
-	iocb.handle = handle;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_CPUCTL;
-	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
-	iocb.cpuctl.number = cpu;
-	iocb.cpuctl.command = CFE_CPU_CMD_START;
-	iocb.cpuctl.gp = gp;
-	iocb.cpuctl.sp = sp;
-	iocb.cpuctl.a1 = a1;
-	iocb.cpuctl.start_addr = (long)fn;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_cpu_stop(int cpu)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_CPUCTL;
-	iocb.psize = sizeof(struct cfe_iocb_cpuctl);
-	iocb.cpuctl.number = cpu;
-	iocb.cpuctl.command = CFE_CPU_CMD_STOP;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_ENUM;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.index = idx;
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = namelen;
-	iocb.envbuf.val = PTR_TO_CFE(val);
-	iocb.envbuf.val_len = vallen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enumdev(int idx, char *name, int namelen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-
-	iocb.fcode = CFE_CMD_DEV_ENUM;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.index = idx;
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = namelen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
-		u64 *type)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-
-	iocb.fcode = CFE_CMD_FW_MEMENUM;
-	iocb.flags = flags;
-	iocb.psize = sizeof(struct cfe_iocb_meminfo);
-	iocb.meminfo.index = idx;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (!CFE_ISERR(iocb.status)) {
-		*start = iocb.meminfo.addr;
-		*length = iocb.meminfo.size;
-		*type = iocb.meminfo.type;
-	}
-
-	return iocb.status;
-}
-
-int cfe_exit(int warm, int status)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-printk("CFE REBOOT\n");
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_RESTART;
-	if (warm)
-		iocb.flags = CFE_FLG_WARMSTART;
-	iocb.psize = sizeof(struct cfe_iocb_exitstat);
-	iocb.exitstat.status = status;
-
-printk("CALL\n");
-	err = cfe_iocb_dispatch(&iocb);
-printk("DONE\n");
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_flushcache(int flags)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
-	iocb.flags = flags;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_getdevinfo(char *name)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_GETINFO;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.ptr = PTR_TO_CFE(name);
-	iocb.buffer.length = strlen(name);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.devflags;
-}
-
-int cfe_getenv(char *name, char *dest, int destlen)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	dest[0] = '\0';
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_GET;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = strlen(name);
-	iocb.envbuf.val = PTR_TO_CFE(dest);
-	iocb.envbuf.val_len = destlen;
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_getfwinfo(struct cfe_fwinfo *info)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_GETINFO;
-	iocb.psize = sizeof(struct cfe_iocb_fwinfo);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return err;
-
-	info->version = iocb.fwinfo.version;
-	info->totalmem = iocb.fwinfo.totalmem;
-	info->flags = iocb.fwinfo.flags;
-	info->boardid = iocb.fwinfo.boardid;
-	info->bootarea_va = iocb.fwinfo.bootarea_va;
-	info->bootarea_pa = iocb.fwinfo.bootarea_pa;
-	info->bootarea_size = iocb.fwinfo.bootarea_size;
-
-	return iocb.status;
-}
-
-int cfe_getstdhandle(int handletype)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_GETHANDLE;
-	iocb.flags = handletype;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.handle;
-}
-
-int cfe_getticks(s64 *ticks)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_FW_GETTIME;
-	iocb.psize = sizeof(struct cfe_iocb_time);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (!CFE_ISERR(iocb.status))
-		*ticks = iocb.time.ticks;
-
-	return iocb.status;
-}
-
-int cfe_inpstat(int handle)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_INPSTAT;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_inpstat);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.inpstat.status;
-}
-
-int cfe_ioctl(int handle, unsigned int ioctlnum,
-	      unsigned char *buffer, int length,
-	      int *retlen, u64 offset)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_IOCTL;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ioctlcmd = ioctlnum;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-	if (retlen)
-		*retlen = iocb.buffer.retlen;
-
-	return iocb.status;
-}
-
-int cfe_open(char *name)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_OPEN;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.ptr = PTR_TO_CFE(name);
-	iocb.buffer.length = strlen(name);
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.handle;
-}
-
-int cfe_read(int handle, unsigned char *buffer, int length)
-{
-	return cfe_readblk(handle, 0, buffer, length);
-}
-
-int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_READ;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.retlen;
-}
-
-int cfe_setenv(char *name, char *val)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_ENV_SET;
-	iocb.psize = sizeof(struct cfe_iocb_envbuf);
-	iocb.envbuf.name = PTR_TO_CFE(name);
-	iocb.envbuf.name_len = strlen(name);
-	iocb.envbuf.val = PTR_TO_CFE(val);
-	iocb.envbuf.val_len = strlen(val);
-
-	err = cfe_iocb_dispatch(&iocb);
-
-	return (CFE_ISERR(err)) ? err : iocb.status;
-}
-
-int cfe_write(int handle, unsigned char *buffer, int length)
-{
-	return cfe_writeblk(handle, 0, buffer, length);
-}
-
-int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
-{
-	struct cfe_iocb iocb;
-	int err;
-
-	memset(&iocb, 0, sizeof(iocb));
-	iocb.fcode = CFE_CMD_DEV_WRITE;
-	iocb.handle = handle;
-	iocb.psize = sizeof(struct cfe_iocb_buf);
-	iocb.buffer.offset = offset;
-	iocb.buffer.ptr = PTR_TO_CFE(buffer);
-	iocb.buffer.length = length;
-
-	err = cfe_iocb_dispatch(&iocb);
-	if (CFE_ISERR(err))
-		return err;
-	if (CFE_ISERR(iocb.status))
-		return iocb.status;
-
-	return iocb.buffer.retlen;
-}
diff --git a/target/linux/brcm63xx/files/arch/mips/cfe/cfe_private.h b/target/linux/brcm63xx/files/arch/mips/cfe/cfe_private.h
deleted file mode 100644
index 0a604d3bbd..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/cfe/cfe_private.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef LINUX_CFE_PRIVATE_H_
-#define LINUX_CFE_PRIVATE_H_
-
-#ifndef __ASSEMBLY__
-
-/* Seal indicating CFE's presence, passed to the kernel. */
-#define CFE_EPTSEAL		0x43464531
-
-#define CFE_CMD_FW_GETINFO	0
-#define CFE_CMD_FW_RESTART	1
-#define CFE_CMD_FW_BOOT		2
-#define CFE_CMD_FW_CPUCTL	3
-#define CFE_CMD_FW_GETTIME      4
-#define CFE_CMD_FW_MEMENUM	5
-#define CFE_CMD_FW_FLUSHCACHE	6
-
-#define CFE_CMD_DEV_GETHANDLE	9
-#define CFE_CMD_DEV_ENUM	10
-#define CFE_CMD_DEV_OPEN	11
-#define CFE_CMD_DEV_INPSTAT	12
-#define CFE_CMD_DEV_READ	13
-#define CFE_CMD_DEV_WRITE	14
-#define CFE_CMD_DEV_IOCTL	15
-#define CFE_CMD_DEV_CLOSE	16
-#define CFE_CMD_DEV_GETINFO	17
-
-#define CFE_CMD_ENV_ENUM	20
-#define CFE_CMD_ENV_GET		22
-#define CFE_CMD_ENV_SET		23
-#define CFE_CMD_ENV_DEL		24
-
-#define CFE_CMD_MAX		32
-
-#define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
-
-typedef u64 cfe_uint_t;
-typedef s64 cfe_int_t;
-typedef s64 cfe_ptr_t;
-
-/* Cast a pointer from native to CFE-API pointer and back */
-#define CFE_TO_PTR(p)		((void *)(unsigned long)(p))
-#define PTR_TO_CFE(p)		((cfe_ptr_t)(unsigned long)(p))
-
-struct cfe_iocb_buf {
-	cfe_uint_t	offset;		/* offset on device (bytes) */
-	cfe_ptr_t	ptr;		/* pointer to a buffer */
-	cfe_uint_t	length;		/* length of this buffer */
-	cfe_uint_t	retlen;		/* returned length (for read ops) */
-	union {
-		cfe_uint_t	ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
-		cfe_uint_t	devflags;	/* Returned device info flags */
-	};
-};
-
-struct cfe_iocb_inpstat {
-	cfe_uint_t	status;		/* 1 means input available */
-};
-
-struct cfe_iocb_envbuf {
-	cfe_int_t	index;		/* 0-based enumeration index */
-	cfe_ptr_t	name;		/* name string buffer */
-	cfe_int_t	name_len;	/* size of name buffer */
-	cfe_ptr_t	val;		/* value string buffer */
-	cfe_int_t	val_len;	/* size of value string buffer */
-};
-
-struct cfe_iocb_cpuctl {
-	cfe_uint_t	number;		/* cpu number to control */
-	cfe_uint_t	command;	/* command to issue to CPU */
-	cfe_uint_t	start_addr;	/* CPU start address */
-	cfe_uint_t	gp;		/* starting GP value */
-	cfe_uint_t	sp;		/* starting SP value */
-	cfe_uint_t	a1;		/* starting A1 value */
-};
-
-struct cfe_iocb_time {
-	cfe_int_t	ticks;		/* current time in ticks */
-};
-
-struct cfe_iocb_exitstat {
-	cfe_int_t	status;
-};
-
-struct cfe_iocb_meminfo {
-	cfe_int_t	index;		/* 0-based enumeration index */
-	cfe_int_t	type;		/* type of memory block */
-	cfe_uint_t	addr;		/* physical start address */
-	cfe_uint_t	size;		/* block size */
-};
-
-struct cfe_iocb_fwinfo {
-	cfe_int_t	version;	/* major, minor, eco version */
-	cfe_int_t	totalmem;	/* total installed mem */
-	cfe_int_t	flags;		/* various flags */
-	cfe_int_t	boardid;	/* board ID */
-	cfe_int_t	bootarea_va;	/* VA of boot area */
-	cfe_int_t	bootarea_pa;	/* PA of boot area */
-	cfe_int_t	bootarea_size;	/* size of boot area */
-	cfe_int_t	reserved1;
-	cfe_int_t	reserved2;
-	cfe_int_t	reserved3;
-};
-
-/* CFE I/O Control Block */
-struct cfe_iocb {
-	cfe_uint_t	fcode;		/* IOCB function code */
-	cfe_int_t	status;		/* return status */
-	cfe_int_t	handle;		/* file/device handle */
-	cfe_uint_t	flags;		/* flags for this IOCB */
-	cfe_uint_t	psize;		/* size of parameter list */
-	union {
-		struct cfe_iocb_buf		buffer;		/* buffer parameters */
-		struct cfe_iocb_inpstat		inpstat;	/* input status parameters */
-		struct cfe_iocb_envbuf		envbuf;		/* environment function parameters */
-		struct cfe_iocb_cpuctl		cpuctl;		/* CPU control parameters */
-		struct cfe_iocb_time		time;		/* timer parameters */
-		struct cfe_iocb_meminfo		meminfo;	/* memory arena info parameters */
-		struct cfe_iocb_fwinfo		fwinfo;		/* firmware information */
-		struct cfe_iocb_exitstat	exitstat;	/* Exit Status */
-	};
-};
-
-
-#include <linux/init.h>
-
-void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
-		      unsigned long fwarg2, unsigned long fwarg3);
-
-#else /* __ASSEMBLY__ */
-
-	.macro	cfe_early_init
-#ifdef CONFIG_CFE
-		jal	cfe_setup
-#endif
-	.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* LINUX_CFE_PRIVATE_H_ */
diff --git a/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c
deleted file mode 100644
index e3703a94c2..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <bcmpci.h>
-#include <bcm_intr.h>
-#include <bcm_map_part.h>
-#include <6348_intr.h>
-#include <6348_map_part.h>
-
-static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-
-static char irq_tab_bcm96348[] __initdata = {
-    [0] = INTERRUPT_ID_MPI,
-    [1] = INTERRUPT_ID_MPI,
-#if defined(CONFIG_USB)
-    [USB_HOST_SLOT] = INTERRUPT_ID_USBH
-#endif
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-    return irq_tab_bcm96348[slot];
-}
-
-static void bcm96348_fixup(struct pci_dev *dev)
-{
-    uint32 memaddr;
-    uint32 size;
-
-    memaddr = pci_resource_start(dev, 0);
-    size = pci_resource_len(dev, 0);
-
-    switch (PCI_SLOT(dev->devfn)) {
-        case 0:
-            // UBUS to PCI address range
-            // Memory Window 1. Mask determines which bits are decoded.
-            mpi->l2pmrange1 = ~(size-1);
-            // UBUS to PCI Memory base address. This is akin to the ChipSelect base
-            // register.
-            mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK;
-            // UBUS to PCI Remap Address. Replaces the masked address bits in the
-            // range register with this setting.
-            // Also, enable direct I/O and direct Memory accesses
-            mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN);
-            break;
-
-        case 1:
-            // Memory Window 2
-            mpi->l2pmrange2 = ~(size-1);
-            // UBUS to PCI Memory base address.
-            mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK;
-            // UBUS to PCI Remap Address
-            mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN);
-            break;
-
-#if defined(CONFIG_USB)
-        case USB_HOST_SLOT:
-            dev->resource[0].start = USB_HOST_BASE;
-            dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1;
-            break;
-#endif
-    }
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-        return 0;
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID,
-          bcm96348_fixup);
-
-/*struct pci_fixup pcibios_fixups[] = {
-    { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup },
-    {0}
-};*/
diff --git a/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c
deleted file mode 100644
index ee1647121e..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/addrspace.h>
-
-#include <bcm_intr.h>
-#include <bcm_map_part.h>
-#include <6348_intr.h>
-#include <6348_map_part.h>
-#include <bcmpci.h>
-
-#include <linux/delay.h>
-
-#if defined(CONFIG_USB)
-#if 0
-#define DPRINT(x...)        printk(x)
-#else
-#define DPRINT(x...)
-#endif
-
-static int 
-pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size);
-static int 
-pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size);
-
-static bool usb_mem_size_rd = FALSE;
-static uint32 usb_mem_base = 0;
-static uint32 usb_cfg_space_cmd_reg = 0;
-#endif
-static bool pci_mem_size_rd = FALSE;
-
-static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
-
-static void mpi_SetupPciConfigAccess(uint32 addr)
-{
-    mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE;
-}
-
-static void mpi_ClearPciConfigAccess(void)
-{
-    mpi->l2pcfgctl = 0x00000000;
-}
-
-#if defined(CONFIG_USB)
-/* --------------------------------------------------------------------------
-    Name: pci63xx_int_write
-Abstract: PCI Config write on internal device(s)
- -------------------------------------------------------------------------- */
-static int 
-pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size)
-{
-    if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-        return PCIBIOS_SUCCESSFUL;
-    }
-
-    switch (size) {
-        case 1:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 2:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            switch (where) {
-                case PCI_COMMAND:
-                    usb_cfg_space_cmd_reg = *value;
-                    break;
-                default:
-                    break;
-            }
-            break;
-        case 4:
-            DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            switch (where) {
-                case PCI_BASE_ADDRESS_0:
-                    if (*value == 0xffffffff) {
-                        usb_mem_size_rd = TRUE;
-                    } else {
-                        usb_mem_base = *value;
-                    }
-                    break;
-                default:
-                    break;
-            }
-            break;
-        default:
-            break;
-    }
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-/* --------------------------------------------------------------------------
-    Name: pci63xx_int_read
-Abstract: PCI Config read on internal device(s)
- -------------------------------------------------------------------------- */
-static int 
-pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size)
-{
-    uint32 retValue = 0xFFFFFFFF;
-
-    if (PCI_SLOT(devfn) != USB_HOST_SLOT) {
-        return PCIBIOS_SUCCESSFUL;
-    }
-
-    // For now, this is specific to the USB Host controller. We can
-    // make it more general if we have to...
-    // Emulate PCI Config accesses
-    switch (where) {
-        case PCI_VENDOR_ID:     
-        case PCI_DEVICE_ID:
-            retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000;
-            break;
-        case PCI_COMMAND:
-        case PCI_STATUS:
-            retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg;
-            break;
-        case PCI_CLASS_REVISION:
-        case PCI_CLASS_DEVICE:
-            retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01;
-            break;
-        case PCI_BASE_ADDRESS_0:
-            if (usb_mem_size_rd) {
-                retValue = USB_BAR0_MEM_SIZE;
-            } else {
-                if (usb_mem_base != 0)
-                    retValue = usb_mem_base;
-                else
-                    retValue = USB_HOST_BASE;
-            }
-            usb_mem_size_rd = FALSE;
-            break;
-        case PCI_CACHE_LINE_SIZE:
-        case PCI_LATENCY_TIMER:
-            retValue = 0;
-            break;
-        case PCI_HEADER_TYPE:
-            retValue = PCI_HEADER_TYPE_NORMAL;
-            break;
-        case PCI_SUBSYSTEM_VENDOR_ID:
-            retValue = PCI_VENDOR_ID_BROADCOM;
-            break;
-        case PCI_SUBSYSTEM_ID:
-            retValue = 0x6300;
-            break;
-        case PCI_INTERRUPT_LINE:
-            retValue = INTERRUPT_ID_USBH; 
-            break;
-        default:
-            break;
-    }
-
-    switch (size) {
-        case 1:
-            *value = (retValue >> ((where & 3) << 3)) & 0xff;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 2:
-            *value = (retValue >> ((where & 3) << 3)) & 0xffff;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        case 4:
-            *value = retValue;
-            DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", 
-                PCI_SLOT(devfn), where, size, *value);
-            break;
-        default:
-            break;
-    }
-
-    return PCIBIOS_SUCCESSFUL;
-}
-#endif
-
-static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 * val)
-{
-    volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-    uint32 data;
-
-#if defined(CONFIG_USB)
-    if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-        return pci63xx_int_read(devfn, where, val, size);
-#endif
-
-    mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-    data = *(uint32 *)ioBase;
-    switch(size) {
-        case 1:
-            *val = (data >> ((where & 3) << 3)) & 0xff;
-            break;
-        case 2:
-            *val = (data >> ((where & 3) << 3)) & 0xffff;
-            break;
-        case 4:
-            *val = data;
-             /* Special case for reading PCI device range */
-            if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-                if (pci_mem_size_rd) {
-                    /* bcm6348 PCI memory window minimum size is 64K */
-                    *val &= PCI_SIZE_64K;
-                }
-            }
-            break;
-        default:
-            break;
-    }
-    pci_mem_size_rd = FALSE;
-    mpi_ClearPciConfigAccess();
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 val)
-{
-    volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1);
-    uint32 data;
-
-#if defined(CONFIG_USB)
-    if (PCI_SLOT(devfn) == USB_HOST_SLOT)
-        return pci63xx_int_write(devfn, where, &val, size);
-#endif
-    mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where));
-    data = *(uint32 *)ioBase;
-    switch(size) {
-        case 1:
-            data = (data & ~(0xff << ((where & 3) << 3))) |
-                (val << ((where & 3) << 3));
-            break;
-        case 2:
-            data = (data & ~(0xffff << ((where & 3) << 3))) |
-                (val << ((where & 3) << 3));
-            break;
-        case 4:
-            data = val;
-            /* Special case for reading PCI device range */
-            if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) {
-                if (val == 0xffffffff)
-                    pci_mem_size_rd = TRUE;
-            }
-            break;
-        default:
-            break;
-    }
-    *(uint32 *)ioBase = data;
-    udelay(500);
-    mpi_ClearPciConfigAccess();
-
-    return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops bcm96348_pci_ops = {
-    .read   = bcm96348_pcibios_read,
-    .write  = bcm96348_pcibios_write
-};
diff --git a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c
deleted file mode 100644
index bea3b7ba08..0000000000
--- a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-<:copyright-gpl
- Copyright 2002 Broadcom Corp. All Rights Reserved.
-
- This program is free software; you can distribute it and/or modify it
- under the terms of the GNU General Public License (Version 2) as
- published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-:>
-*/
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <bcmpci.h>
-
-static struct resource bcm_pci_io_resource = {
-	.name   = "bcm96348 pci IO space",
-	.start  = BCM_PCI_IO_BASE,
-	.end    = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1,
-	.flags  = IORESOURCE_IO
-};
-
-static struct resource bcm_pci_mem_resource = {
-	.name   = "bcm96348 pci memory space",
-	.start  = BCM_PCI_MEM_BASE,
-	.end    = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1,
-	.flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops bcm96348_pci_ops;
-
-struct pci_controller bcm96348_controller = {
-	.pci_ops   	= &bcm96348_pci_ops,
-	.io_resource	= &bcm_pci_io_resource,
-	.mem_resource	= &bcm_pci_mem_resource,
-};
-
-static __init int bcm96348_pci_init(void)
-{
-	/* Avoid ISA compat ranges.  */
-	PCIBIOS_MIN_IO = 0x00000000;
-	PCIBIOS_MIN_MEM = 0x00000000;
-
-	/* Set I/O resource limits.  */
-	ioport_resource.end = 0x1fffffff;
-	iomem_resource.end = 0xffffffff;
-
-	register_pci_controller(&bcm96348_controller);
-        return 0;
-}
-
-arch_initcall(bcm96348_pci_init);
diff --git a/target/linux/brcm63xx/files/drivers/serial/bcm63xx_cons.c b/target/linux/brcm63xx/files/drivers/serial/bcm63xx_cons.c
deleted file mode 100644
index 8fff16dd9c..0000000000
--- a/target/linux/brcm63xx/files/drivers/serial/bcm63xx_cons.c
+++ /dev/null
@@ -1,1041 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-/* Description: Serial port driver for the BCM963XX. */
-
-#define CARDNAME    "bcm963xx_serial driver"
-#define VERSION     "2.0"
-#define VER_STR     CARDNAME " v" VERSION "\n"
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-/* for definition of struct console */
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <asm/uaccess.h>
-
-#include <bcmtypes.h>
-#include <board.h>
-#include <bcm_map_part.h>
-#include <bcm_intr.h>
-#include <6348_map_part.h>
-#include <6348_intr.h>
-
-static DEFINE_SPINLOCK(bcm963xx_serial_lock);
-
-extern void _putc(char);
-extern void _puts(const char *);
-
-typedef struct bcm_serial {
-	volatile Uart *port;
-	int type;
-	int flags;
-	int irq;
-	int baud_base;
-	int blocked_open;
-	unsigned short close_delay;
-	unsigned short closing_wait;
-	unsigned short line;	/* port/line number */
-	unsigned short cflags;	/* line configuration flag */
-	unsigned short x_char;	/* xon/xoff character */
-	unsigned short read_status_mask;	/* mask for read condition */
-	unsigned short ignore_status_mask;	/* mask for ignore condition */
-	unsigned long event;	/* mask used in BH */
-	int xmit_head;		/* Position of the head */
-	int xmit_tail;		/* Position of the tail */
-	int xmit_cnt;		/* Count of the chars in the buffer */
-	int count;		/* indicates how many times it has been opened */
-	int magic;
-
-	struct async_icount icount;	/* keep track of things ... */
-	struct tty_struct *tty;	/* tty associated */
-	struct ktermios normal_termios;
-
-	wait_queue_head_t open_wait;
-	wait_queue_head_t close_wait;
-
-	long session;		/* Session of opening process */
-	long pgrp;		/* pgrp of opening process */
-
-	unsigned char is_initialized;
-} Context;
-
-
-/*---------------------------------------------------------------------*/
-/* Define bits in the Interrupt Enable register                        */
-/*---------------------------------------------------------------------*/
-/* Enable receive interrupt              */
-#define RXINT   (RXFIFONE|RXOVFERR)
-
-/* Enable transmit interrupt             */
-#define TXINT    (TXFIFOEMT|TXUNDERR|TXOVFERR)
-
-/* Enable receiver line status interrupt */
-#define LSINT    (RXBRK|RXPARERR|RXFRAMERR)
-
-#define BCM_NUM_UARTS                   1
-
-#define BD_BCM63XX_TIMER_CLOCK_INPUT    (FPERIPH)
-
-
-static struct bcm_serial multi[BCM_NUM_UARTS];
-static struct bcm_serial *lines[BCM_NUM_UARTS];
-static struct tty_driver *serial_driver;
-static struct ktermios *serial_termios[BCM_NUM_UARTS];
-static struct ktermios *serial_termios_locked[BCM_NUM_UARTS];
-
-
-static void bcm_stop(struct tty_struct *tty);
-static void bcm_start(struct tty_struct *tty);
-static inline void receive_chars(struct bcm_serial *info);
-static int startup(struct bcm_serial *info);
-static void shutdown(struct bcm_serial *info);
-static void change_speed(volatile Uart * pUart, tcflag_t cFlag);
-static void bcm63xx_cons_flush_chars(struct tty_struct *tty);
-static int bcm63xx_cons_write(struct tty_struct *tty,
-			      const unsigned char *buf, int count);
-static int bcm63xx_cons_write_room(struct tty_struct *tty);
-static int bcm_chars_in_buffer(struct tty_struct *tty);
-static void bcm_flush_buffer(struct tty_struct *tty);
-static void bcm_throttle(struct tty_struct *tty);
-static void bcm_unthrottle(struct tty_struct *tty);
-static void bcm_send_xchar(struct tty_struct *tty, char ch);
-static int get_serial_info(struct bcm_serial *info,
-			   struct serial_struct *retinfo);
-static int set_serial_info(struct bcm_serial *info,
-			   struct serial_struct *new_info);
-static int get_lsr_info(struct bcm_serial *info, unsigned int *value);
-static void send_break(struct bcm_serial *info, int duration);
-static int bcm_ioctl(struct tty_struct *tty, struct file *file,
-		     unsigned int cmd, unsigned long arg);
-static void bcm_set_termios(struct tty_struct *tty,
-			    struct ktermios *old_termios);
-static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp);
-static void bcm_hangup(struct tty_struct *tty);
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-			   struct bcm_serial *info);
-static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp);
-static int __init bcm63xx_serialinit(void);
-
-
-/*
- * ------------------------------------------------------------
- * rs_stop () and rs_start ()
- *
- * These routines are called before setting or resetting 
- * tty->stopped. They enable or disable transmitter interrupts, 
- * as necessary.
- * ------------------------------------------------------------
- */
-static void bcm_stop(struct tty_struct *tty)
-{
-}
-
-static void bcm_start(struct tty_struct *tty)
-{
-	_puts(CARDNAME " Start\n");
-}
-
-/*
- * ------------------------------------------------------------
- * receive_char ()
- *
- * This routine deals with inputs from any lines.
- * ------------------------------------------------------------
- */
-static inline void receive_chars(struct bcm_serial *info)
-{
-	struct tty_struct *tty = 0;
-	struct async_icount *icount;
-	int ignore = 0;
-	unsigned short status, tmp;
-	UCHAR ch = 0;
-	while ((status = info->port->intStatus) & RXINT) {
-		char flag_char = TTY_NORMAL;
-
-		if (status & RXFIFONE)
-			ch = info->port->Data;	// Read the character
-		tty = info->tty;	/* now tty points to the proper dev */
-		icount = &info->icount;
-		if (!tty)
-			break;
-		if (!tty_buffer_request_room(tty, 1))
-			break;
-		icount->rx++;
-		if (status & RXBRK) {
-			flag_char = TTY_BREAK;
-			icount->brk++;
-		}
-		// keep track of the statistics
-		if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) {
-			if (status & RXPARERR)	/* parity error */
-				icount->parity++;
-			else if (status & RXFRAMERR)	/* frame error */
-				icount->frame++;
-			if (status & RXOVFERR) {
-				// Overflow. Reset the RX FIFO
-				info->port->fifoctl |= RSTRXFIFOS;
-				icount->overrun++;
-			}
-			// check to see if we should ignore the character
-			// and mask off conditions that should be ignored
-			if (status & info->ignore_status_mask) {
-				if (++ignore > 100)
-					break;
-				goto ignore_char;
-			}
-			// Mask off the error conditions we want to ignore
-			tmp = status & info->read_status_mask;
-			if (tmp & RXPARERR) {
-				flag_char = TTY_PARITY;
-			} else if (tmp & RXFRAMERR) {
-				flag_char = TTY_FRAME;
-			}
-			if (tmp & RXOVFERR) {
-				tty_insert_flip_char(tty, ch, flag_char);
-				ch = 0;
-				flag_char = TTY_OVERRUN;
-				if (!tty_buffer_request_room(tty, 1))
-					break;
-			}
-		}
-		tty_insert_flip_char(tty, ch, flag_char);
-	}
-      ignore_char:;
-	tty_flip_buffer_push(tty);
-	tty_schedule_flip(tty);
-
-}
-
-
-/*
- * ------------------------------------------------------------
- * bcm_interrupt ()
- *
- * this is the main interrupt routine for the chip.
- * It deals with the multiple ports.
- * ------------------------------------------------------------
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-static irqreturn_t bcm_interrupt(int irq, void *dev)
-#else
-static void bcm_interrupt(int irq, void *dev, struct pt_regs *regs)
-#endif
-{
-	struct bcm_serial *info = lines[0];
-	UINT16 intStat;
-
-	/* get pending interrupt flags from UART  */
-
-	/* Mask with only the serial interrupts that are enabled */
-	intStat = info->port->intStatus & info->port->intMask;
-	while (intStat) {
-		if (intStat & RXINT)
-			receive_chars(info);
-		else if (intStat & TXINT)
-			info->port->intStatus = TXINT;
-		else		/* don't know what it was, so let's mask it */
-			info->port->intMask &= ~intStat;
-
-		intStat = info->port->intStatus & info->port->intMask;
-	}
-
-	// Clear the interrupt
-	enable_brcm_irq(INTERRUPT_ID_UART);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	return IRQ_HANDLED;
-#endif
-}
-
-/*
- * -------------------------------------------------------------------
- * startup ()
- *
- * various initialization tasks
- * ------------------------------------------------------------------- 
- */
-static int startup(struct bcm_serial *info)
-{
-	// Port is already started...
-	return 0;
-}
-
-/* 
- * -------------------------------------------------------------------
- * shutdown ()
- *
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- * ------------------------------------------------------------------- 
- */
-static void shutdown(struct bcm_serial *info)
-{
-	unsigned long flags;
-	if (!info->is_initialized)
-		return;
-
-	spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-
-	info->port->control &= ~(BRGEN | TXEN | RXEN);
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-	info->is_initialized = 0;
-
-	spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-}
-
-/* 
- * -------------------------------------------------------------------
- * change_speed ()
- *
- * Set the baud rate, character size, parity and stop bits.
- * ------------------------------------------------------------------- 
- */
-static void change_speed(volatile Uart * pUart, tcflag_t cFlag)
-{
-	unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
-
-	spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
-	switch (cFlag & (CBAUD | CBAUDEX)) {
-	case B115200:
-		ulBaud = 115200;
-		break;
-	case B57600:
-		ulBaud = 57600;
-		break;
-	case B38400:
-		ulBaud = 38400;
-		break;
-	case B19200:
-		ulBaud = 19200;
-		break;
-	case B9600:
-		ulBaud = 9600;
-		break;
-	case B4800:
-		ulBaud = 4800;
-		break;
-	case B2400:
-		ulBaud = 2400;
-		break;
-	case B1800:
-		ulBaud = 1800;
-		break;
-	case B1200:
-		ulBaud = 1200;
-		break;
-	case B600:
-		ulBaud = 600;
-		break;
-	case B300:
-		ulBaud = 300;
-		break;
-	case B200:
-		ulBaud = 200;
-		break;
-	case B150:
-		ulBaud = 150;
-		break;
-	case B134:
-		ulBaud = 134;
-		break;
-	case B110:
-		ulBaud = 110;
-		break;
-	case B75:
-		ulBaud = 75;
-		break;
-	case B50:
-		ulBaud = 50;
-		break;
-	default:
-		ulBaud = 115200;
-		break;
-	}
-
-	/* Calculate buad rate.  */
-	ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
-	ulTmp = (ulClockFreqHz / ulBaud) / 16;
-	if (ulTmp & 0x01)
-		ulTmp /= 2;	/* Rounding up, so sub is already accounted for */
-	else
-		ulTmp = (ulTmp / 2) - 1;	/* Rounding down so we must sub 1 */
-	pUart->baudword = ulTmp;
-
-	/* Set character size, stop bits and parity.  */
-	switch (cFlag & CSIZE) {
-	case CS5:
-		ulTmp = BITS5SYM;	/* select transmit 5 bit data size */
-		break;
-	case CS6:
-		ulTmp = BITS6SYM;	/* select transmit 6 bit data size */
-		break;
-	case CS7:
-		ulTmp = BITS7SYM;	/* select transmit 7 bit data size */
-		break;
-	default:
-		ulTmp = BITS8SYM;	/* select transmit 8 bit data size */
-		break;
-	}
-	if (cFlag & CSTOPB)
-		ulTmp |= TWOSTOP;	/* select 2 stop bits */
-	else
-		ulTmp |= ONESTOP;	/* select one stop bit */
-
-	/* Write these values into the config reg.  */
-	pUart->config = ulTmp;
-	pUart->control &=
-	    ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
-	switch (cFlag & (PARENB | PARODD)) {
-	case PARENB | PARODD:
-		pUart->control |= RXPARITYEN | TXPARITYEN;
-		break;
-	case PARENB:
-		pUart->control |=
-		    RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
-		break;
-	default:
-		pUart->control |= 0;
-		break;
-	}
-
-	/* Reset and flush uart */
-	pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
-	spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
-}
-
-
-/* 
- * -------------------------------------------------------------------
- * bcm_flush_char ()
- *
- * Nothing to flush.  Polled I/O is used.
- * ------------------------------------------------------------------- 
- */
-static void bcm63xx_cons_flush_chars(struct tty_struct *tty)
-{
-}
-
-
-/* 
- * -------------------------------------------------------------------
- * bcm63xx_cons_write ()
- *
- * Main output routine using polled I/O.
- * ------------------------------------------------------------------- 
- */
-static int bcm63xx_cons_write(struct tty_struct *tty,
-			      const unsigned char *buf, int count)
-{
-	int c;
-
-	for (c = 0; c < count; c++)
-		_putc(buf[c]);
-	return count;
-}
-
-/* 
- * -------------------------------------------------------------------
- * bcm63xx_cons_write_room ()
- *
- * Compute the amount of space available for writing.
- * ------------------------------------------------------------------- 
- */
-static int bcm63xx_cons_write_room(struct tty_struct *tty)
-{
-	/* Pick a number.  Any number.  Polled I/O is used. */
-	return 1024;
-}
-
-/* 
- * -------------------------------------------------------------------
- * bcm_chars_in_buffer ()
- *
- * compute the amount of char left to be transmitted
- * ------------------------------------------------------------------- 
- */
-static int bcm_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-/* 
- * -------------------------------------------------------------------
- * bcm_flush_buffer ()
- *
- * Empty the output buffer
- * ------------------------------------------------------------------- 
- */
-static void bcm_flush_buffer(struct tty_struct *tty)
-{
-	tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * bcm_throttle () and bcm_unthrottle ()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled (or not).
- * ------------------------------------------------------------
- */
-static void bcm_throttle(struct tty_struct *tty)
-{
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-	if (I_IXOFF(tty))
-		info->x_char = STOP_CHAR(tty);
-}
-
-static void bcm_unthrottle(struct tty_struct *tty)
-{
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			info->x_char = START_CHAR(tty);
-	}
-}
-
-static void bcm_send_xchar(struct tty_struct *tty, char ch)
-{
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-	info->x_char = ch;
-	if (ch)
-		bcm_start(info->tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl () and friends
- * ------------------------------------------------------------
- */
-static int get_serial_info(struct bcm_serial *info,
-			   struct serial_struct *retinfo)
-{
-	struct serial_struct tmp;
-
-	if (!retinfo)
-		return -EFAULT;
-
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = (int) info->port;
-	tmp.irq = info->irq;
-	tmp.flags = 0;
-	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
-
-	return copy_to_user(retinfo, &tmp, sizeof(*retinfo));
-}
-
-static int set_serial_info(struct bcm_serial *info,
-			   struct serial_struct *new_info)
-{
-	struct serial_struct new_serial;
-	struct bcm_serial old_info;
-	int retval = 0;
-
-	if (!new_info)
-		return -EFAULT;
-
-	copy_from_user(&new_serial, new_info, sizeof(new_serial));
-	old_info = *info;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-
-	if (info->count > 1)
-		return -EBUSY;
-
-	/* OK, past this point, all the error checking has been done.
-	 * At this point, we start making changes.....
-	 */
-	info->baud_base = new_serial.baud_base;
-	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
-	retval = startup(info);
-	return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- *          is emptied.  On bus types like RS485, the transmitter must
- *          release the bus after transmitting. This must be done when
- *          the transmit shift register is empty, not be done when the
- *          transmit holding register is empty.  This functionality
- *          allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct bcm_serial *info, unsigned int *value)
-{
-	return (0);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(struct bcm_serial *info, int duration)
-{
-	unsigned long flags;
-
-	if (!info->port)
-		return;
-
-	current->state = TASK_INTERRUPTIBLE;
-
-	/*save_flags (flags);
-	   cli(); */
-	spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-
-	info->port->control |= XMITBREAK;
-	schedule_timeout(duration);
-	info->port->control &= ~XMITBREAK;
-
-	spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-	//restore_flags (flags);
-}
-
-static int bcm_ioctl(struct tty_struct *tty, struct file *file,
-		     unsigned int cmd, unsigned long arg)
-{
-	int error;
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-	int retval;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
-	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-			return -EIO;
-	}
-	switch (cmd) {
-
-	case TCSBRK:		/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			send_break(info, HZ / 4);	/* 1/4 second */
-		return 0;
-
-	case TCSBRKP:		/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
-		return 0;
-
-	case TIOCGSOFTCAR:
-		error =
-		    access_ok(VERIFY_WRITE, (void *) arg, sizeof(long));
-		if (!error)
-			return -EFAULT;
-		else {
-			put_user(C_CLOCAL(tty) ? 1 : 0,
-				 (unsigned long *) arg);
-			return 0;
-		}
-
-	case TIOCSSOFTCAR:
-		error = get_user(arg, (unsigned long *) arg);
-		if (error)
-			return error;
-		tty->termios->c_cflag =
-		    ((tty->termios->
-		      c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
-		return 0;
-
-	case TIOCGSERIAL:
-		error =
-		    access_ok(VERIFY_WRITE, (void *) arg,
-			      sizeof(struct serial_struct));
-		if (!error)
-			return -EFAULT;
-		else
-			return get_serial_info(info,
-					       (struct serial_struct *)
-					       arg);
-
-	case TIOCSSERIAL:
-		return set_serial_info(info, (struct serial_struct *) arg);
-
-	case TIOCSERGETLSR:	/* Get line status register */
-		error =
-		    access_ok(VERIFY_WRITE, (void *) arg,
-			      sizeof(unsigned int));
-		if (!error)
-			return -EFAULT;
-		else
-			return get_lsr_info(info, (unsigned int *) arg);
-
-	case TIOCSERGSTRUCT:
-		error =
-		    access_ok(VERIFY_WRITE, (void *) arg,
-			      sizeof(struct bcm_serial));
-		if (!error)
-			return -EFAULT;
-		else {
-			copy_to_user((struct bcm_serial *) arg, info,
-				     sizeof(struct bcm_serial));
-			return 0;
-		}
-
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static void bcm_set_termios(struct tty_struct *tty,
-			    struct ktermios *old_termios)
-{
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-
-	if (tty->termios->c_cflag != old_termios->c_cflag)
-		change_speed(info->port, tty->termios->c_cflag);
-}
-
-/*
- * ------------------------------------------------------------
- * bcm63xx_cons_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we turn off
- * the transmit enable and receive enable flags.
- * ------------------------------------------------------------
- */
-static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp)
-{
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-	unsigned long flags;
-
-	if (!info)
-		return;
-
-	/*save_flags (flags); 
-	   cli(); */
-	spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-		//restore_flags (flags);
-		return;
-	}
-
-	if ((tty->count == 1) && (info->count != 1)) {
-
-		/* Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk
-		    ("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
-		     "info->count is %d\n", info->count);
-		info->count = 1;
-	}
-
-	if (--info->count < 0) {
-		printk("ds_close: bad serial port count for ttys%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
-	}
-
-	if (info->count) {
-		//restore_flags (flags);
-		spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-		return;
-	}
-
-	/* Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-
-	/* At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts.
-	 */
-	shutdown(info);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	if (tty->driver->flush_buffer)
-		tty->driver->flush_buffer(tty);
-#else
-	if (tty->driver.flush_buffer)
-		tty->driver.flush_buffer(tty);
-#endif
-	if (tty->ldisc.flush_buffer)
-		tty->ldisc.flush_buffer(tty);
-
-	tty->closing = 0;
-	info->event = 0;
-	info->tty = 0;
-	if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) {
-		if (tty->ldisc.close)
-			(tty->ldisc.close) (tty);
-		tty->ldisc = *tty_ldisc_get(N_TTY);
-		tty->termios->c_line = N_TTY;
-		if (tty->ldisc.open)
-			(tty->ldisc.open) (tty);
-	}
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout(info->close_delay);
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	wake_up_interruptible(&info->close_wait);
-
-	//restore_flags (flags);
-	spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-}
-
-/*
- * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
- */
-static void bcm_hangup(struct tty_struct *tty)
-{
-
-	struct bcm_serial *info = (struct bcm_serial *) tty->driver_data;
-
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->tty = 0;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-			   struct bcm_serial *info)
-{
-	return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port. It also performs the 
- * serial-specific initialization for the tty structure.
- */
-static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp)
-{
-	struct bcm_serial *info;
-	int retval, line;
-
-	// Make sure we're only opening on of the ports we support
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
-#else
-	line = MINOR(tty->device) - tty->driver.minor_start;
-#endif
-
-	if ((line < 0) || (line >= BCM_NUM_UARTS))
-		return -ENODEV;
-
-	info = lines[line];
-
-	tty->low_latency = 1;
-	info->port->intMask = 0;	/* Clear any pending interrupts */
-	info->port->intMask = RXINT;	/* Enable RX */
-
-	info->count++;
-	tty->driver_data = info;
-	info->tty = tty;
-	enable_brcm_irq(INTERRUPT_ID_UART);
-
-	// Start up serial port
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval)
-		return retval;
-
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-	info->pgrp = task_pgrp(current);
-#else
-	info->session = current->session;
-	info->pgrp = current->pgrp;
-#endif
-
-	return 0;
-}
-
-
-static struct tty_operations rs_ops = {
-	.open = bcm63xx_cons_open,
-	.close = bcm63xx_cons_close,
-	.write = bcm63xx_cons_write,
-	.flush_chars = bcm63xx_cons_flush_chars,
-	.write_room = bcm63xx_cons_write_room,
-	.chars_in_buffer = bcm_chars_in_buffer,
-	.flush_buffer = bcm_flush_buffer,
-	.ioctl = bcm_ioctl,
-	.throttle = bcm_throttle,
-	.unthrottle = bcm_unthrottle,
-	.send_xchar = bcm_send_xchar,
-	.set_termios = bcm_set_termios,
-	.stop = bcm_stop,
-	.start = bcm_start,
-	.hangup = bcm_hangup,
-};
-
-/* --------------------------------------------------------------------------
-    Name: bcm63xx_serialinit
- Purpose: Initialize our BCM63xx serial driver
--------------------------------------------------------------------------- */
-static int __init bcm63xx_serialinit(void)
-{
-	int i, flags;
-	struct bcm_serial *info;
-
-	// Print the driver version information
-	printk(VER_STR);
-	serial_driver = alloc_tty_driver(BCM_NUM_UARTS);
-	if (!serial_driver)
-		return -ENOMEM;
-
-	serial_driver->owner = THIS_MODULE;
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->num = 1;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
-	serial_driver->termios = serial_termios;
-	serial_driver->termios_locked = serial_termios_locked;
-
-	tty_set_operations(serial_driver, &rs_ops);
-
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
-
-	//save_flags(flags); cli();
-	spin_lock_irqsave(&bcm963xx_serial_lock, flags);
-
-	for (i = 0; i < 1; i++) {
-		info = &multi[i];
-		lines[i] = info;
-		info->magic = SERIAL_MAGIC;
-		info->port = (Uart *) ((char *) UART_BASE + (i * 0x20));
-		info->tty = 0;
-		info->irq = (2 - i) + 8;
-		info->line = i;
-		info->close_delay = 50;
-		info->closing_wait = 3000;
-		info->x_char = 0;
-		info->event = 0;
-		info->count = 0;
-		info->blocked_open = 0;
-		info->normal_termios = serial_driver->init_termios;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
-
-		/* If we are pointing to address zero then punt - not correctly
-		 * set up in setup.c to handle this. 
-		 */
-		if (!info->port)
-			return 0;
-		BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
-	}
-
-	/* order matters here... the trick is that flags
-	 * is updated... in request_irq - to immediatedly obliterate
-	 * it is unwise. 
-	 */
-	spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
-	return 0;
-}
-
-module_init(bcm63xx_serialinit);
-
-/* --------------------------------------------------------------------------
-    Name: bcm_console_print
- Purpose: bcm_console_print is registered for printk.
-          The console_lock must be held when we get here.
--------------------------------------------------------------------------- */
-static void bcm_console_print(struct console *cons, const char *str,
-			      unsigned int count)
-{
-	unsigned int i;
-	//_puts(str);
-	for (i = 0; i < count; i++, str++) {
-		_putc(*str);
-		if (*str == 10) {
-			_putc(13);
-		}
-	}
-}
-
-static struct tty_driver *bcm_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-static int __init bcm_console_setup(struct console *co, char *options)
-{
-	return 0;
-}
-
-static struct console bcm_sercons = {
-	.name = "ttyS",
-	.write = bcm_console_print,
-	.device = bcm_console_device,
-	.setup = bcm_console_setup,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-};
-
-static int __init bcm63xx_console_init(void)
-{
-	register_console(&bcm_sercons);
-	return 0;
-}
-
-console_initcall(bcm63xx_console_init);
diff --git a/target/linux/brcm63xx/files/include/asm-mips/cfe.h b/target/linux/brcm63xx/files/include/asm-mips/cfe.h
deleted file mode 100644
index 47c3f5613d..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/cfe.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Broadcom Common Firmware Environment (CFE) support
- *
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- *
- * Copyright (C) 2006 Michael Buesch
- *
- * Original Authors:  Mitch Lichtenberg, Chris Demetriou
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef LINUX_CFE_API_H_
-#define LINUX_CFE_API_H_
-
-#include <linux/types.h>
-
-
-#define CFE_MI_RESERVED		0		/* memory is reserved, do not use */
-#define CFE_MI_AVAILABLE	1		/* memory is available */
-
-#define CFE_FLG_WARMSTART	0x00000001
-#define CFE_FLG_FULL_ARENA	0x00000001
-#define CFE_FLG_ENV_PERMANENT	0x00000001
-
-#define CFE_CPU_CMD_START	1
-#define CFE_CPU_CMD_STOP	0
-
-#define CFE_STDHANDLE_CONSOLE	0
-
-#define CFE_DEV_NETWORK 	1
-#define CFE_DEV_DISK		2
-#define CFE_DEV_FLASH		3
-#define CFE_DEV_SERIAL		4
-#define CFE_DEV_CPU		5
-#define CFE_DEV_NVRAM		6
-#define CFE_DEV_CLOCK           7
-#define CFE_DEV_OTHER		8
-#define CFE_DEV_MASK		0x0F
-
-#define CFE_CACHE_FLUSH_D	1
-#define CFE_CACHE_INVAL_I	2
-#define CFE_CACHE_INVAL_D	4
-#define CFE_CACHE_INVAL_L2	8
-
-#define CFE_FWI_64BIT		0x00000001
-#define CFE_FWI_32BIT		0x00000002
-#define CFE_FWI_RELOC		0x00000004
-#define CFE_FWI_UNCACHED	0x00000008
-#define CFE_FWI_MULTICPU	0x00000010
-#define CFE_FWI_FUNCSIM		0x00000020
-#define CFE_FWI_RTLSIM		0x00000040
-
-struct cfe_fwinfo {
-	s64 version;		/* major, minor, eco version */
-	s64 totalmem;		/* total installed mem */
-	s64 flags;		/* various flags */
-	s64 boardid;		/* board ID */
-	s64 bootarea_va;	/* VA of boot area */
-	s64 bootarea_pa;	/* PA of boot area */
-	s64 bootarea_size;	/* size of boot area */
-};
-
-
-/* The public CFE API */
-
-int cfe_present(void);	/* Check if we booted from CFE. Returns bool */
-
-int cfe_getticks(s64 *ticks);
-int cfe_close(int handle);
-int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
-int cfe_cpu_stop(int cpu);
-int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
-int cfe_enumdev(int idx, char *name, int namelen);
-int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
-		u64 *type);
-int cfe_exit(int warm, int status);
-int cfe_flushcache(int flags);
-int cfe_getdevinfo(char *name);
-int cfe_getenv(char *name, char *dest, int destlen);
-int cfe_getfwinfo(struct cfe_fwinfo *info);
-int cfe_getstdhandle(int handletype);
-int cfe_inpstat(int handle);
-int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
-	      int length, int *retlen, u64 offset);
-int cfe_open(char *name);
-int cfe_read(int handle, unsigned char *buffer, int length);
-int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length);
-int cfe_setenv(char *name, char *val);
-int cfe_write(int handle, unsigned char *buffer, int length);
-int cfe_writeblk(int handle, s64 offset, unsigned char *buffer,
-		 int length);
-
-
-/* High level API */
-
-/* Print some information to CFE's console (most likely serial line) */
-int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
-int cfe_vprintk(const char *fmt, va_list args);
-
-
-
-/* Error codes returned by the low API functions */
-
-#define CFE_ISERR(errcode)	(errcode < 0)
-
-#define CFE_OK			 0
-#define CFE_ERR                 -1	/* generic error */
-#define CFE_ERR_INV_COMMAND	-2
-#define CFE_ERR_EOF		-3
-#define CFE_ERR_IOERR		-4
-#define CFE_ERR_NOMEM		-5
-#define CFE_ERR_DEVNOTFOUND	-6
-#define CFE_ERR_DEVOPEN		-7
-#define CFE_ERR_INV_PARAM	-8
-#define CFE_ERR_ENVNOTFOUND	-9
-#define CFE_ERR_ENVREADONLY	-10
-
-#define CFE_ERR_NOTELF		-11
-#define CFE_ERR_NOT32BIT 	-12
-#define CFE_ERR_WRONGENDIAN 	-13
-#define CFE_ERR_BADELFVERS 	-14
-#define CFE_ERR_NOTMIPS 	-15
-#define CFE_ERR_BADELFFMT 	-16
-#define CFE_ERR_BADADDR 	-17
-
-#define CFE_ERR_FILENOTFOUND	-18
-#define CFE_ERR_UNSUPPORTED	-19
-
-#define CFE_ERR_HOSTUNKNOWN	-20
-
-#define CFE_ERR_TIMEOUT		-21
-
-#define CFE_ERR_PROTOCOLERR	-22
-
-#define CFE_ERR_NETDOWN		-23
-#define CFE_ERR_NONAMESERVER	-24
-
-#define CFE_ERR_NOHANDLES	-25
-#define CFE_ERR_ALREADYBOUND	-26
-
-#define CFE_ERR_CANNOTSET	-27
-#define CFE_ERR_NOMORE		-28
-#define CFE_ERR_BADFILESYS	-29
-#define CFE_ERR_FSNOTAVAIL	-30
-
-#define CFE_ERR_INVBOOTBLOCK	-31
-#define CFE_ERR_WRONGDEVTYPE	-32
-#define CFE_ERR_BBCHECKSUM	-33
-#define CFE_ERR_BOOTPROGCHKSUM	-34
-
-#define CFE_ERR_LDRNOTAVAIL	-35
-
-#define CFE_ERR_NOTREADY	-36
-
-#define CFE_ERR_GETMEM          -37
-#define CFE_ERR_SETMEM          -38
-
-#define CFE_ERR_NOTCONN		-39
-#define CFE_ERR_ADDRINUSE	-40
-
-
-#endif /* LINUX_CFE_API_H_ */
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h
deleted file mode 100644
index 3a6e00a2ae..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6338_INTR_H
-#define __6338_INTR_H
-
-/*=====================================================================*/
-/* BCM6338 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6338 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER               (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI                 (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART                (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_DG                  (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ADSL                (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_ATM                 (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_USBS                (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1               (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY                (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_SDRAM               (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_USB_BULK_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_BULK_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_EMAC1_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_EMAC1_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_SDIO                (INTERNAL_ISR_TABLE_OFFSET + 17)
-
-#endif  /* __BCM6338_H */
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
deleted file mode 100644
index 70bf807342..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6338_MAP_H
-#define __BCM6338_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE           0xfffe0000
-#define TIMR_BASE           0xfffe0200 
-#define UART_BASE           0xfffe0300
-#define GPIO_BASE           0xfffe0400
-#define SPI_BASE            0xfffe0c00
-
-typedef struct PerfControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define EMAC_CLK_EN     0x0010
-#define USBS_CLK_EN     0x0010
-#define SAR_CLK_EN      0x0020
-
-#define SPI_CLK_EN      0x0200
-
-  uint32        pll_control;
-#define SOFT_RESET 0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  5
-#define EI_CLEAR_SHFT   10
-#define EI_MASK_SHFT    15
-#define EI_INSENS_SHFT  20
-#define EI_LEVEL_SHFT   25
-
-  uint32        unused[4];      /* (18) */
-  uint32        BlockSoftReset; /* (28) */
-#define BSR_SPI             0x00000001
-#define BSR_EMAC            0x00000004
-#define BSR_USBH            0x00000008
-#define BSR_USBS            0x00000010
-#define BSR_ADSL            0x00000020
-#define BSR_DMAMEM          0x00000040
-#define BSR_SAR             0x00000080
-#define BSR_ACLC            0x00000100
-#define BSR_ADSL_MIPS_PLL   0x00000400
-#define BSR_ALL_BLOCKS      \
-    (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-     BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) 
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define LOOPBK          0x10
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-
-  byte          config;
-#define XMITBREAK       0x40
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-  /* 4-LSBS represent STOP bits/char
-   * in 1/8 bit-time intervals.  Zero
-   * represents 1/8 stop bit interval.
-   * Fifteen represents 2 stop bits.
-   */
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  /* 5-bit TimeoutCnt is in low bits of this register.
-   *  This count represents the number of characters 
-   *  idle times before setting receive Irq when below threshold
-   */
-  uint32        baudword;
-  /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-   */
-
-  byte          txf_levl;       /* Read-only fifo depth */
-  byte          rxf_levl;       /* Read-only fifo depth */
-  byte          fifocfg;        /* Upper 4-bits are TxThresh, Lower are
-                                 *      RxThreshold.  Irq can be asserted
-                                 *      when rx fifo> thresh, txfifo<thresh
-                                 */
-  byte          prog_out;       /* Set value of DTR (Bit0), RTS (Bit1)
-                                 *  if these bits are also enabled to GPIO_o
-                                 */
-#define	DTREN	0x01
-#define	RTSEN	0x02
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;     /* Low 4-bits, set corr bit to 1 to 
-                                         * detect irq on rising AND falling 
-                                         * edges for corresponding GPIO_i
-                                         * if enabled (edge insensitive)
-                                         */
-  byte          DeltaIPConfig_Mask;     /* Upper 4 bits: 1 for posedge sense
-                                         *      0 for negedge sense if
-                                         *      not configured for edge
-                                         *      insensitive (see above)
-                                         * Lower 4 bits: Mask to enable change
-                                         *  detection IRQ for corresponding
-                                         *  GPIO_i
-                                         */
-  byte          DeltaIP_SyncIP;         /* Upper 4 bits show which bits
-                                         *  have changed (may set IRQ).
-                                         *  read automatically clears bit
-                                         * Lower 4 bits are actual status
-                                         */
-
-  uint16        intMask;				/* Same Bit defs for Mask and status */
-  uint16        intStatus;
-#define DELTAIP         0x0001
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOTHOLD     0x0008
-#define TXREADLATCH     0x0010
-#define TXFIFOEMT       0x0020
-#define RXUNDERR        0x0040
-#define RXOVFERR        0x0080
-#define RXTIMEOUT       0x0100
-#define RXFIFOFULL      0x0200
-#define RXFIFOTHOLD     0x0400
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;                   /* Write to TX, Read from RX */
-                                        /* bits 11:8 are BRK,PAR,FRM errors */
-
-  uint32		unused3;
-  uint32		unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint32        unused0;
-  uint32        GPIODir;      /* bits 7:0 */
-  uint32        unused1;
-  uint32        GPIOio;       /* bits 7:0 */
-  uint32        LEDCtrl;
-#define         LED3_STROBE             0x08000000
-#define         LED2_STROBE             0x04000000
-#define         LED1_STROBE             0x02000000
-#define         LED0_STROBE             0x01000000
-#define         LED_TEST                0x00010000
-#define         LED3_DISABLE_LINK_ACT   0x00008000
-#define         LED2_DISABLE_LINK_ACT   0x00004000
-#define         LED1_DISABLE_LINK_ACT   0x00002000
-#define         LED0_DISABLE_LINK_ACT   0x00001000
-#define         LED_INTERVAL_SET_MASK   0x00000f00
-#define         LED_INTERVAL_SET_320MS  0x00000500
-#define         LED_INTERVAL_SET_160MS  0x00000400
-#define         LED_INTERVAL_SET_80MS   0x00000300
-#define         LED_INTERVAL_SET_40MS   0x00000200
-#define         LED_INTERVAL_SET_20MS   0x00000100
-#define         LED3_ON                 0x00000080
-#define         LED2_ON                 0x00000040
-#define         LED1_ON                 0x00000020
-#define         LED0_ON                 0x00000010
-#define         LED3_ENABLE             0x00000008
-#define         LED2_ENABLE             0x00000004
-#define         LED1_ENABLE             0x00000002
-#define         LED0_ENABLE             0x00000001
-  uint32        SpiSlaveCfg;
-#define         SPI_SLAVE_RESET         0x00010000
-#define         SPI_RESTRICT            0x00000400
-#define         SPI_DELAY_DISABLE       0x00000200
-#define         SPI_PROBE_MUX_SEL_MASK  0x000001e0
-#define         SPI_SER_ADDR_CFG_MASK   0x0000000c
-#define         SPI_MODE                0x00000001
-  uint32        vRegConfig;
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_MAX_BITS_MASK          0x0f
-#define GPIO_NUM_TO_MASK(X)             (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-/*
-** Spi Controller
-*/
-
-typedef struct SpiControl {
-  uint16        spiCmd;                 /* (0x0): SPI command */
-#define SPI_CMD_START_IMMEDIATE         3
-
-#define SPI_CMD_COMMAND_SHIFT           0
-#define SPI_CMD_DEVICE_ID_SHIFT         4
-#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT  8
-
-  byte          spiIntStatus;           /* (0x2): SPI interrupt status */
-  byte          spiMaskIntStatus;       /* (0x3): SPI masked interrupt status */
-
-  byte          spiIntMask;             /* (0x4): SPI interrupt mask */
-#define SPI_INTR_CMD_DONE               0x01
-#define SPI_INTR_CLEAR_ALL              0x1f
-
-  byte          spiStatus;              /* (0x5): SPI status */
-
-  byte          spiClkCfg;              /* (0x6): SPI clock configuration */
-
-  byte          spiFillByte;            /* (0x7): SPI fill byte */
-
-  byte          unused0; 
-  byte          spiMsgTail;             /* (0x9): msgtail */
-  byte          unused1; 
-  byte          spiRxTail;              /* (0xB): rxtail */
-
-  uint32        unused2[13];            /* (0x0c - 0x3c) reserved */
-
-  byte          spiMsgCtl;              /* (0x40) control byte */
-#define HALF_DUPLEX_W                   1
-#define HALF_DUPLEX_R                   2
-#define SPI_MSG_TYPE_SHIFT              6
-#define SPI_BYTE_CNT_SHIFT              0
-  byte          spiMsgData[63];         /* (0x41 - 0x7f) msg data */
-  byte          spiRxDataFifo[64];      /* (0x80 - 0xbf) rx data */
-  byte          unused3[64];            /* (0xc0 - 0xff) reserved */
-} SpiControl;
-
-#define SPI ((volatile SpiControl * const) SPI_BASE)
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
-  uint32        base;                   /* base address in upper 24 bits */
-#define EBI_SIZE_8K         0
-#define EBI_SIZE_16K        1
-#define EBI_SIZE_32K        2
-#define EBI_SIZE_64K        3
-#define EBI_SIZE_128K       4
-#define EBI_SIZE_256K       5
-#define EBI_SIZE_512K       6
-#define EBI_SIZE_1M         7
-#define EBI_SIZE_2M         8
-#define EBI_SIZE_4M         9
-#define EBI_SIZE_8M         10
-#define EBI_SIZE_16M        11
-#define EBI_SIZE_32M        12
-#define EBI_SIZE_64M        13
-#define EBI_SIZE_128M       14
-#define EBI_SIZE_256M       15
-  uint32        config;
-#define EBI_ENABLE          0x00000001      /* .. enable this range */
-#define EBI_WAIT_STATES     0x0000000e      /* .. mask for wait states */
-#define EBI_WTST_SHIFT      1               /* .. for shifting wait states */
-#define EBI_WORD_WIDE       0x00000010      /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN            0x00000020      /* enable posted writes */
-#define EBI_POLARITY        0x00000040      /* .. set to invert something, 
-                                        **    don't know what yet */
-#define EBI_TS_TA_MODE      0x00000080      /* .. use TS/TA mode */
-#define EBI_TS_SEL          0x00000100      /* .. drive tsize, not bs_b */
-#define EBI_FIFO            0x00000200      /* .. use fifo */
-#define EBI_RE              0x00000400      /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
-  EbiChipSelect cs[1];                  /* size chip select configuration */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-
-#endif
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h
deleted file mode 100644
index fb77cbcbe1..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6345_INTR_H
-#define __6345_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6345 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6345 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-#define DMA_ISR_TABLE_OFFSET            (INTERNAL_ISR_TABLE_OFFSET + 13)
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-/* Internal peripheral interrupt IDs */
-#define INTERRUPT_ID_TIMER              (INTERNAL_ISR_TABLE_OFFSET +  0)
-#define INTERRUPT_ID_UART               (INTERNAL_ISR_TABLE_OFFSET +  2)
-#define INTERRUPT_ID_ADSL               (INTERNAL_ISR_TABLE_OFFSET +  3)
-#define INTERRUPT_ID_ATM                (INTERNAL_ISR_TABLE_OFFSET +  4)
-#define INTERRUPT_ID_USB                (INTERNAL_ISR_TABLE_OFFSET +  5)
-#define INTERRUPT_ID_EMAC               (INTERNAL_ISR_TABLE_OFFSET +  8)
-#define INTERRUPT_ID_EPHY               (INTERNAL_ISR_TABLE_OFFSET +  12)
-
-/* DMA channel interrupt IDs */        
-#define INTERRUPT_ID_EMAC_RX_CHAN       (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
-#define INTERRUPT_ID_EMAC_TX_CHAN       (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
-#define INTERRUPT_ID_EBI_RX_CHAN        (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
-#define INTERRUPT_ID_EBI_TX_CHAN        (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
-#define INTERRUPT_ID_RESERVED_RX_CHAN   (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
-#define INTERRUPT_ID_RESERVED_TX_CHAN   (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
-#define INTERRUPT_ID_USB_BULK_RX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
-#define INTERRUPT_ID_USB_BULK_TX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_RX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_TX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
-#define INTERRUPT_ID_USB_ISO_RX_CHAN    (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
-#define INTERRUPT_ID_USB_ISO_TX_CHAN    (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
-
-
-#endif  /* __BCM6345_H */
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h
deleted file mode 100644
index 78e59a4399..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6345_MAP_H
-#define __BCM6345_MAP_H
-
-
-#include "bcmtypes.h"
-#include "6345_intr.h"
-
-typedef struct IntControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define USB_CLK_EN      0x0100
-#define EMAC_CLK_EN     0x0080
-#define UART_CLK_EN     0x0008
-#define CPU_CLK_EN      0x0001
-
-  uint32        pll_control;
-#define SOFT_RESET	0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  4
-#define EI_CLEAR_SHFT   8
-#define EI_MASK_SHFT    12
-#define EI_INSENS_SHFT  16
-#define EI_LEVEL_SHFT   20
-} IntControl;
-
-#define INTC_BASE     0xfffe0000
-#define PERF ((volatile IntControl * const) INTC_BASE)
-
-#define TIMR_BASE     0xfffe0200    
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-  byte          config;
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define XMITBREAK       0x40
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  uint32        baudword;
-
-  byte          txf_levl;
-  byte          rxf_levl;
-  byte          fifocfg;
-  byte          prog_out;
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;
-  byte          DeltaIPConfig_Mask;
-  byte          DeltaIP_SyncIP;
-  uint16        intMask;
-  uint16        intStatus;
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOEMT       0x0020
-#define RXOVFERR        0x0080
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;
-  uint32		unused3;
-  uint32		unused4;
-} Uart;
-
-#define UART_BASE     0xfffe0300
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint16        unused0;
-  byte          unused1;
-  byte          TBusSel;
-
-  uint16        unused2;
-  uint16        GPIODir;
-  byte          unused3;
-  byte          Leds;
-  uint16        GPIOio;
-
-  uint32        UartCtl;
-} GpioControl;
-
-#define GPIO_BASE     0xfffe0400
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-#define GPIO_NUM_MAX_BITS_MASK          0x0f
-#define GPIO_NUM_TO_MASK(X)             (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-
-#endif
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h
deleted file mode 100644
index da3ee9fc34..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6348_INTR_H
-#define __6348_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6348 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6348 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER               (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI                 (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART                (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_ADSL                (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ATM                 (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_USBS                (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_EMAC2               (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1               (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY                (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_M2M                 (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_ACLC                (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USBH                (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_SDRAM               (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_USB_BULK_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_USB_BULK_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 17)
-#define INTERRUPT_ID_USB_ISO_RX_DMA      (INTERNAL_ISR_TABLE_OFFSET + 18)
-#define INTERRUPT_ID_USB_ISO_TX_DMA      (INTERNAL_ISR_TABLE_OFFSET + 19)
-#define INTERRUPT_ID_EMAC1_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 20)
-#define INTERRUPT_ID_EMAC1_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 21)
-#define INTERRUPT_ID_EMAC2_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 22)
-#define INTERRUPT_ID_EMAC2_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 23)
-#define INTERRUPT_ID_MPI                 (INTERNAL_ISR_TABLE_OFFSET + 24)
-#define INTERRUPT_ID_DG                  (INTERNAL_ISR_TABLE_OFFSET + 25)
-
-
-#endif  /* __BCM6348_H */
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h
deleted file mode 100644
index 199ef9e15e..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6348_MAP_H
-#define __BCM6348_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE           0xfffe0000
-#define TIMR_BASE           0xfffe0200    
-#define UART_BASE           0xfffe0300
-#define GPIO_BASE           0xfffe0400
-#define MPI_BASE            0xfffe2000    /* MPI control registers */
-#define USB_HOST_BASE       0xfffe1b00    /* USB host registers */
-#define USB_HOST_NON_OHCI   0xfffe1c00    /* USB host non-OHCI registers */
-
-typedef struct PerfControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define EMAC_CLK_EN     0x0010
-#define SAR_CLK_EN      0x0020
-#define USBS_CLK_EN     0x0040
-#define USBH_CLK_EN     0x0100
-
-  uint32        pll_control;
-#define SOFT_RESET 0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  5
-#define EI_CLEAR_SHFT   10
-#define EI_MASK_SHFT    15
-#define EI_INSENS_SHFT  20
-#define EI_LEVEL_SHFT   25
-
-  uint32        unused[4];      /* (18) */
-  uint32        BlockSoftReset; /* (28) */
-#define BSR_SPI             0x00000001
-#define BSR_EMAC            0x00000004
-#define BSR_USBH            0x00000008
-#define BSR_USBS            0x00000010
-#define BSR_ADSL            0x00000020
-#define BSR_DMAMEM          0x00000040
-#define BSR_SAR             0x00000080
-#define BSR_ACLC            0x00000100
-#define BSR_ADSL_MIPS_PLL   0x00000400
-#define BSR_ALL_BLOCKS      \
-    (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-     BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) 
-  uint32        unused2[2];     /* (2c) */
-  uint32        PllStrap;       /* (34) */
-#define PLL_N1_SHFT         20
-#define PLL_N1_MASK         (7<<PLL_N1_SHFT)
-#define PLL_N2_SHFT         15
-#define PLL_N2_MASK         (0x1f<<PLL_N2_SHFT)
-#define PLL_M1_REF_SHFT     12
-#define PLL_M1_REF_MASK     (7<<PLL_M1_REF_SHFT)
-#define PLL_M2_REF_SHFT     9
-#define PLL_M2_REF_MASK     (7<<PLL_M2_REF_SHFT)
-#define PLL_M1_CPU_SHFT     6
-#define PLL_M1_CPU_MASK     (7<<PLL_M1_CPU_SHFT)
-#define PLL_M1_BUS_SHFT     3
-#define PLL_M1_BUS_MASK     (7<<PLL_M1_BUS_SHFT)
-#define PLL_M2_BUS_SHFT     0
-#define PLL_M2_BUS_MASK     (7<<PLL_M2_BUS_SHFT)
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define LOOPBK          0x10
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-
-  byte          config;
-#define XMITBREAK       0x40
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-  /* 4-LSBS represent STOP bits/char
-   * in 1/8 bit-time intervals.  Zero
-   * represents 1/8 stop bit interval.
-   * Fifteen represents 2 stop bits.
-   */
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  /* 5-bit TimeoutCnt is in low bits of this register.
-   *  This count represents the number of characters 
-   *  idle times before setting receive Irq when below threshold
-   */
-  uint32        baudword;
-  /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-   */
-
-  byte          txf_levl;       /* Read-only fifo depth */
-  byte          rxf_levl;       /* Read-only fifo depth */
-  byte          fifocfg;        /* Upper 4-bits are TxThresh, Lower are
-                                 *      RxThreshold.  Irq can be asserted
-                                 *      when rx fifo> thresh, txfifo<thresh
-                                 */
-  byte          prog_out;       /* Set value of DTR (Bit0), RTS (Bit1)
-                                 *  if these bits are also enabled to GPIO_o
-                                 */
-#define	DTREN	0x01
-#define	RTSEN	0x02
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;     /* Low 4-bits, set corr bit to 1 to 
-                                         * detect irq on rising AND falling 
-                                         * edges for corresponding GPIO_i
-                                         * if enabled (edge insensitive)
-                                         */
-  byte          DeltaIPConfig_Mask;     /* Upper 4 bits: 1 for posedge sense
-                                         *      0 for negedge sense if
-                                         *      not configured for edge
-                                         *      insensitive (see above)
-                                         * Lower 4 bits: Mask to enable change
-                                         *  detection IRQ for corresponding
-                                         *  GPIO_i
-                                         */
-  byte          DeltaIP_SyncIP;         /* Upper 4 bits show which bits
-                                         *  have changed (may set IRQ).
-                                         *  read automatically clears bit
-                                         * Lower 4 bits are actual status
-                                         */
-
-  uint16        intMask;				/* Same Bit defs for Mask and status */
-  uint16        intStatus;
-#define DELTAIP         0x0001
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOTHOLD     0x0008
-#define TXREADLATCH     0x0010
-#define TXFIFOEMT       0x0020
-#define RXUNDERR        0x0040
-#define RXOVFERR        0x0080
-#define RXTIMEOUT       0x0100
-#define RXFIFOFULL      0x0200
-#define RXFIFOTHOLD     0x0400
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;                   /* Write to TX, Read from RX */
-                                        /* bits 11:8 are BRK,PAR,FRM errors */
-
-  uint32		unused3;
-  uint32		unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint32        GPIODir_high; /* bits 36:32 */
-  uint32        GPIODir;      /* bits 31:00 */
-  uint32        GPIOio_high;  /* bits 36:32 */
-  uint32        GPIOio;       /* bits 31:00 */
-  uint32        LEDCtrl;
-#define         LED3_STROBE             0x08000000
-#define         LED2_STROBE             0x04000000
-#define         LED1_STROBE             0x02000000
-#define         LED0_STROBE             0x01000000
-#define         LED_TEST                0x00010000
-#define         LED3_DISABLE_LINK_ACT   0x00008000
-#define         LED2_DISABLE_LINK_ACT   0x00004000
-#define         LED1_DISABLE_LINK_ACT   0x00002000
-#define         LED0_DISABLE_LINK_ACT   0x00001000
-#define         LED_INTERVAL_SET_MASK   0x00000f00
-#define         LED_INTERVAL_SET_320MS  0x00000500
-#define         LED_INTERVAL_SET_160MS  0x00000400
-#define         LED_INTERVAL_SET_80MS   0x00000300
-#define         LED_INTERVAL_SET_40MS   0x00000200
-#define         LED_INTERVAL_SET_20MS   0x00000100
-#define         LED3_ON                 0x00000080
-#define         LED2_ON                 0x00000040
-#define         LED1_ON                 0x00000020
-#define         LED0_ON                 0x00000010
-#define         LED3_ENABLE             0x00000008
-#define         LED2_ENABLE             0x00000004
-#define         LED1_ENABLE             0x00000002
-#define         LED0_ENABLE             0x00000001
-  uint32        SpiSlaveCfg;
-#define         SPI_SLAVE_RESET         0x00010000
-#define         SPI_RESTRICT            0x00000400
-#define         SPI_DELAY_DISABLE       0x00000200
-#define         SPI_PROBE_MUX_SEL_MASK  0x000001e0
-#define         SPI_SER_ADDR_CFG_MASK   0x0000000c
-#define         SPI_MODE                0x00000001
-  uint32        GPIOMode;
-#define         GROUP4_DIAG             0x00090000
-#define         GROUP4_UTOPIA           0x00080000
-#define         GROUP4_LEGACY_LED       0x00030000
-#define         GROUP4_MII_SNOOP        0x00020000
-#define         GROUP4_EXT_EPHY         0x00010000
-#define         GROUP3_DIAG             0x00009000
-#define         GROUP3_UTOPIA           0x00008000
-#define         GROUP3_EXT_MII          0x00007000
-#define         GROUP2_DIAG             0x00000900
-#define         GROUP2_PCI              0x00000500
-#define         GROUP1_DIAG             0x00000090
-#define         GROUP1_UTOPIA           0x00000080
-#define         GROUP1_SPI_UART         0x00000060
-#define         GROUP1_SPI_MASTER       0x00000060
-#define         GROUP1_MII_PCCARD       0x00000040
-#define         GROUP1_MII_SNOOP        0x00000020
-#define         GROUP1_EXT_EPHY         0x00000010
-#define         GROUP0_DIAG             0x00000009
-#define         GROUP0_EXT_MII          0x00000007
-
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_TOTAL_BITS_MASK        0x3f
-#define GPIO_NUM_MAX_BITS_MASK          0x1f
-#define GPIO_NUM_TO_MASK(X)             ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
-
-/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
-#define GPIO_NUM_MAX_BITS_MASK_HIGH     0x07
-#define GPIO_NUM_TO_MASK_HIGH(X)        ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
-
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
-  uint32        base;                   /* base address in upper 24 bits */
-#define EBI_SIZE_8K         0
-#define EBI_SIZE_16K        1
-#define EBI_SIZE_32K        2
-#define EBI_SIZE_64K        3
-#define EBI_SIZE_128K       4
-#define EBI_SIZE_256K       5
-#define EBI_SIZE_512K       6
-#define EBI_SIZE_1M         7
-#define EBI_SIZE_2M         8
-#define EBI_SIZE_4M         9
-#define EBI_SIZE_8M         10
-#define EBI_SIZE_16M        11
-#define EBI_SIZE_32M        12
-#define EBI_SIZE_64M        13
-#define EBI_SIZE_128M       14
-#define EBI_SIZE_256M       15
-  uint32        config;
-#define EBI_ENABLE          0x00000001      /* .. enable this range */
-#define EBI_WAIT_STATES     0x0000000e      /* .. mask for wait states */
-#define EBI_WTST_SHIFT      1               /* .. for shifting wait states */
-#define EBI_WORD_WIDE       0x00000010      /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN            0x00000020      /* enable posted writes */
-#define EBI_POLARITY        0x00000040      /* .. set to invert something, 
-                                        **    don't know what yet */
-#define EBI_TS_TA_MODE      0x00000080      /* .. use TS/TA mode */
-#define EBI_TS_SEL          0x00000100      /* .. drive tsize, not bs_b */
-#define EBI_FIFO            0x00000200      /* .. use fifo */
-#define EBI_RE              0x00000400      /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
-  EbiChipSelect cs[7];                  /* size chip select configuration */
-#define EBI_CS0_BASE            0
-#define EBI_CS1_BASE            1
-#define EBI_CS2_BASE            2
-#define EBI_CS3_BASE            3
-#define PCMCIA_COMMON_BASE      4
-#define PCMCIA_ATTRIBUTE_BASE   5
-#define PCMCIA_IO_BASE          6
-  uint32        unused0[2];             /* reserved */
-  uint32        ebi_control;            /* ebi control */
-  uint32        unused1[4];             /* reserved */
-#define EBI_ACCESS_TIMEOUT      0x000007FF
-  uint32        pcmcia_cntl1;           /* pcmcia control 1 */
-#define PCCARD_CARD_RESET       0x00040000
-#define CARDBUS_ENABLE          0x00008000
-#define PCMCIA_ENABLE           0x00004000
-#define PCMCIA_GPIO_ENABLE      0x00002000
-#define CARDBUS_IDSEL           0x00001F00
-#define VS2_OEN                 0x00000080
-#define VS1_OEN                 0x00000040
-#define VS2_OUT                 0x00000020
-#define VS1_OUT                 0x00000010
-#define VS2_IN                  0x00000008
-#define VS1_IN                  0x00000004
-#define CD2_IN                  0x00000002
-#define CD1_IN                  0x00000001
-#define VS_MASK                 0x0000000C
-#define CD_MASK                 0x00000003
-  uint32        unused2;                /* reserved */
-  uint32        pcmcia_cntl2;           /* pcmcia control 2 */
-#define PCMCIA_BYTESWAP_DIS     0x00000002
-#define PCMCIA_HALFWORD_EN      0x00000001
-#define RW_ACTIVE_CNT_BIT       2
-#define INACTIVE_CNT_BIT        8
-#define CE_SETUP_CNT_BIT        16
-#define CE_HOLD_CNT_BIT         24
-  uint32        unused3[40];            /* reserved */
-
-  uint32        sp0range;               /* PCI to internal system bus address space */
-  uint32        sp0remap;
-  uint32        sp0cfg;
-  uint32        sp1range;
-  uint32        sp1remap;
-  uint32        sp1cfg;
-
-  uint32        EndianCfg;
-
-  uint32        l2pcfgctl;              /* internal system bus to PCI IO/Cfg control */
-#define DIR_CFG_SEL             0x80000000 /* change from PCI I/O access to PCI config access */
-#define DIR_CFG_USEREG          0x40000000 /* use this register info for PCI configuration access */
-#define DEVICE_NUMBER           0x00007C00 /* device number for the PCI configuration access */
-#define FUNC_NUMBER             0x00000300 /* function number for the PCI configuration access */
-#define REG_NUMBER              0x000000FC /* register number for the PCI configuration access */
-#define CONFIG_TYPE             0x00000003 /* configuration type for the PCI configuration access */
-
-  uint32        l2pmrange1;             /* internal system bus to PCI memory space */
-#define PCI_SIZE_64K            0xFFFF0000
-#define PCI_SIZE_128K           0xFFFE0000
-#define PCI_SIZE_256K           0xFFFC0000
-#define PCI_SIZE_512K           0xFFF80000
-#define PCI_SIZE_1M             0xFFF00000
-#define PCI_SIZE_2M             0xFFE00000
-#define PCI_SIZE_4M             0xFFC00000
-#define PCI_SIZE_8M             0xFF800000
-#define PCI_SIZE_16M            0xFF000000
-#define PCI_SIZE_32M            0xFE000000
-  uint32        l2pmbase1;              /* kseg0 or kseg1 address & 0x1FFFFFFF */
-  uint32        l2pmremap1;
-#define CARDBUS_MEM             0x00000004
-#define MEM_WINDOW_EN           0x00000001
-  uint32        l2pmrange2;
-  uint32        l2pmbase2;
-  uint32        l2pmremap2;
-  uint32        l2piorange;             /* internal system bus to PCI I/O space */
-  uint32        l2piobase;
-  uint32        l2pioremap;
-
-  uint32        pcimodesel;
-#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
-#define PCI_BAR2_NOSWAP         0x00000002 /* BAR at offset 0x20 */
-#define PCI_BAR1_NOSWAP         0x00000001 /* BAR at affset 0x1c */
-
-  uint32        pciintstat;             /* PCI interrupt mask/status */
-#define MAILBOX1_SENT           0x08
-#define MAILBOX0_SENT           0x04
-#define MAILBOX1_MSG_RCV        0x02
-#define MAILBOX0_MSG_RCV        0x01
-  uint32        locbuscntrl;            /* internal system bus control */
-#define DIR_U2P_NOSWAP          0x00000002
-#define EN_PCI_GPIO             0x00000001
-  uint32        locintstat;             /* internal system bus interrupt mask/status */
-#define CSERR                   0x0200
-#define SERR                    0x0100
-#define EXT_PCI_INT             0x0080
-#define DIR_FAILED              0x0040
-#define DIR_COMPLETE            0x0020
-#define PCI_CFG                 0x0010
-  uint32        unused5[7];
-
-  uint32        mailbox0;
-  uint32        mailbox1;
-
-  uint32        pcicfgcntrl;            /* internal system bus PCI configuration control */
-#define PCI_CFG_REG_WRITE_EN    0x00000080
-#define PCI_CFG_ADDR            0x0000003C
-  uint32        pcicfgdata;             /* internal system bus PCI configuration data */
-
-  uint32        locch2ctl;              /* PCI to interrnal system bus DMA (downstream) local control */
-#define MPI_DMA_HALT            0x00000008  /* idle after finish current memory burst */
-#define MPI_DMA_PKT_HALT        0x00000004  /* idle after an EOP flag is detected */
-#define MPI_DMA_STALL           0x00000002  /* idle after an EOP flag is detected */
-#define MPI_DMA_ENABLE          0x00000001  /* set to enable channel */
-  uint32        locch2intStat;
-#define MPI_DMA_NO_DESC         0x00000004  /* no valid descriptors */
-#define MPI_DMA_DONE            0x00000002  /* packet xfer complete */
-#define MPI_DMA_BUFF_DONE       0x00000001  /* buffer done */
-  uint32        locch2intMask;
-  uint32        unused6;
-  uint32        locch2descaddr;
-  uint32        locch2status1;
-#define LOCAL_DESC_STATE        0xE0000000
-#define PCI_DESC_STATE          0x1C000000
-#define BYTE_DONE               0x03FFC000
-#define RING_ADDR               0x00003FFF
-  uint32        locch2status2;
-#define BUFPTR_OFFSET           0x1FFF0000
-#define PCI_MASTER_STATE        0x000000C0
-#define LOC_MASTER_STATE        0x00000038
-#define CONTROL_STATE           0x00000007
-  uint32        unused7;
-
-  uint32        locch1Ctl;              /*internal system bus to PCI DMA (upstream) local control */
-#define DMA_U2P_LE              0x00000200  /* local bus is little endian */
-#define DMA_U2P_NOSWAP          0x00000100  /* lccal bus is little endian but no data swapped */
-  uint32        locch1intstat;
-  uint32        locch1intmask;
-  uint32        unused8;
-  uint32        locch1descaddr;
-  uint32        locch1status1;
-  uint32        locch1status2;
-  uint32        unused9;
-
-  uint32        pcich1ctl;              /* internal system bus to PCI DMA PCI control */
-  uint32        pcich1intstat;
-  uint32        pcich1intmask;
-  uint32        pcich1descaddr;
-  uint32        pcich1status1;
-  uint32        pcich1status2;
-
-  uint32        pcich2Ctl;              /* PCI to internal system bus DMA PCI control */
-  uint32        pcich2intstat;
-  uint32        pcich2intmask;
-  uint32        pcich2descaddr;
-  uint32        pcich2status1;
-  uint32        pcich2status2;
-
-  uint32        perm_id;                /* permanent device and vendor id */
-  uint32        perm_rev;               /* permanent revision id */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-/* PCI configuration address space start offset 0x40 */
-#define BRCM_PCI_CONFIG_TIMER               0x40
-#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK	0x0000FF00
-#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK		0x000000FF
-
-/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
-#define NON_OHCI_ENABLE_PORT1   0x00000001 /* Use USB port 1 for host, not dev */
-#define NON_OHCI_BYTE_SWAP      0x00000008 /* Swap USB host registers */
-
-#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
-
-#endif
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h
deleted file mode 100644
index e902e96aa3..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-//**************************************************************************************
-// File Name  : bcmTag.h
-//
-// Description: add tag with validation system to the firmware image file to be uploaded
-//              via http
-//
-// Created    : 02/28/2002  seanl
-//**************************************************************************************
-
-#ifndef _BCMTAG_H_
-#define _BCMTAG_H_
-
-
-#define BCM_SIG_1   "Broadcom Corporation"
-#define BCM_SIG_2   "ver. 2.0"          // was "firmware version 2.0" now it is split 6 char out for chip id.
-
-#define BCM_TAG_VER         "6"
-#define BCM_TAG_VER_LAST    "26"
-
-// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
-#define TAG_LEN         256
-#define TAG_VER_LEN     4
-#define SIG_LEN         20
-#define SIG_LEN_2       14   // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
-#define CHIP_ID_LEN		6	
-#define IMAGE_LEN       10
-#define ADDRESS_LEN     12
-#define FLAG_LEN        2
-#define TOKEN_LEN       20
-#define BOARD_ID_LEN    16
-#define RESERVED_LEN    (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
-                        (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
-
-
-// TAG for downloadable image (kernel plus file system)
-typedef struct _FILE_TAG
-{
-    unsigned char tagVersion[TAG_VER_LEN];       // tag version.  Will be 2 here.
-    unsigned char signiture_1[SIG_LEN];          // text line for company info
-    unsigned char signiture_2[SIG_LEN_2];        // additional info (can be version number)
-    unsigned char chipId[CHIP_ID_LEN];			 // chip id 
-    unsigned char boardId[BOARD_ID_LEN];         // board id
-    unsigned char bigEndian[FLAG_LEN];           // if = 1 - big, = 0 - little endia of the host
-    unsigned char totalImageLen[IMAGE_LEN];      // the sum of all the following length
-    unsigned char cfeAddress[ADDRESS_LEN];       // if non zero, cfe starting address
-    unsigned char cfeLen[IMAGE_LEN];             // if non zero, cfe size in clear ASCII text.
-    unsigned char rootfsAddress[ADDRESS_LEN];    // if non zero, filesystem starting address
-    unsigned char rootfsLen[IMAGE_LEN];          // if non zero, filesystem size in clear ASCII text.
-    unsigned char kernelAddress[ADDRESS_LEN];    // if non zero, kernel starting address
-    unsigned char kernelLen[IMAGE_LEN];          // if non zero, kernel size in clear ASCII text.
-    unsigned char dualImage[FLAG_LEN];           // if 1, dual image
-    unsigned char inactiveLen[FLAG_LEN];         // if 1, the image is INACTIVE; if 0, active 
-    unsigned char reserved[RESERVED_LEN];        // reserved for later use
-    unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha;  for
-                                                 // now will be 4 unsigned char crc
-    unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
-} FILE_TAG, *PFILE_TAG;
-
-#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-#define CRC_LEN 4
-
-// only included if for bcmTag.exe program
-#ifdef BCMTAG_EXE_USE
-
-static unsigned long Crc32_table[256] = {
-    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-};
-#endif // BCMTAG_USE
-
-
-#endif // _BCMTAG_H_
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h
deleted file mode 100644
index 8c56840f42..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM_INTR_H
-#define __BCM_INTR_H
-
-#ifdef __cplusplus
-    extern "C" {
-#endif
-
-#if defined(CONFIG_BCM96338)
-#include <6338_intr.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_intr.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_intr.h>
-#endif
-
-/* defines */
-struct pt_regs;
-typedef int (*FN_HANDLER) (int, void *);
-
-/* prototypes */
-extern void enable_brcm_irq(unsigned int irq);
-extern void disable_brcm_irq(unsigned int irq);
-extern int request_external_irq(unsigned int irq,
-    FN_HANDLER handler, unsigned long irqflags, 
-    const char * devname, void *dev_id);
-extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
-    unsigned int interruptId);
-extern void dump_intr_regs(void);
-
-/* compatibility definitions */
-#define BcmHalInterruptEnable(irq)      enable_brcm_irq( irq )
-#define BcmHalInterruptDisable(irq)     disable_brcm_irq( irq )
-
-#ifdef __cplusplus
-    }
-#endif
-
-#endif
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h
deleted file mode 100644
index ccfe965dc3..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM_MAP_PART_H
-#define __BCM_MAP_PART_H
-
-#if defined(CONFIG_BCM96338)
-#include <6338_map_part.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_map_part.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_map_part.h>
-#endif
-
-#endif
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h
deleted file mode 100644
index cecbd995a4..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-//
-// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
-//
-#ifndef BCMPCI_H
-#define BCMPCI_H
-
-/* Memory window in internal system bus address space */ 
-#define BCM_PCI_MEM_BASE        0x08000000
-/* IO window in internal system bus address space */ 
-#define BCM_PCI_IO_BASE         0x0C000000
-
-#define BCM_PCI_ADDR_MASK       0x1fffffff
-
-/* Memory window size (range) */
-#define BCM_PCI_MEM_SIZE_16MB   0x01000000
-/* IO window size (range) */
-#define BCM_PCI_IO_SIZE_64KB    0x00010000
-
-/* PCI Configuration and I/O space acesss */
-#define BCM_PCI_CFG(d, f, o)    ( (d << 11) | (f << 8) | (o/4 << 2) )
-
-/* fake USB PCI slot */
-#define USB_HOST_SLOT           9
-#define USB_BAR0_MEM_SIZE       0x0800
-
-#define BCM_HOST_MEM_SPACE1     0x10000000
-#define BCM_HOST_MEM_SPACE2     0x00000000
-
-/* 
- * EBI bus clock is 33MHz and share with PCI bus
- * each clock cycle is 30ns.
- */
-/* attribute memory access wait cnt for 4306 */
-#define PCMCIA_ATTR_CE_HOLD     3  // data hold time 70ns
-#define PCMCIA_ATTR_CE_SETUP    3  // data setup time 50ns
-#define PCMCIA_ATTR_INACTIVE    6  // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_ATTR_ACTIVE      10 // OE/WE pulse width 300ns
-
-/* common memory access wait cnt for 4306 */
-#define PCMCIA_MEM_CE_HOLD      1  // data hold time 30ns
-#define PCMCIA_MEM_CE_SETUP     1  // data setup time 30ns
-#define PCMCIA_MEM_INACTIVE     2  // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_MEM_ACTIVE       5  // OE/WE pulse width 150ns
-
-#define PCCARD_VCC_MASK     0x00070000  // Mask Reset also
-#define PCCARD_VCC_33V      0x00010000
-#define PCCARD_VCC_50V      0x00020000
-
-typedef enum {
-    MPI_CARDTYPE_NONE,      // No Card in slot
-    MPI_CARDTYPE_PCMCIA,    // 16-bit PCMCIA card in slot    
-    MPI_CARDTYPE_CARDBUS,   // 32-bit CardBus card in slot
-}   CardType;
-
-#define CARDBUS_SLOT        0    // Slot 0 is default for CardBus
-
-#define pcmciaAttrOffset    0x00200000
-#define pcmciaMemOffset     0x00000000
-// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. 
-#define pcmciaIoOffset      (BCM_PCI_IO_BASE + 0x80000)
-// Base Address is that mapped into the MPI ChipSelect registers. 
-// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
-#define pcmciaBase          0xbf000000
-#define pcmciaAttr          (pcmciaAttrOffset | pcmciaBase)
-#define pcmciaMem           (pcmciaMemOffset  | pcmciaBase)
-#define pcmciaIo            (pcmciaIoOffset   | pcmciaBase)
-
-#endif
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h
deleted file mode 100644
index 43aebc9c06..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-//
-// bcmtypes.h - misc useful typedefs
-//
-#ifndef BCMTYPES_H
-#define BCMTYPES_H
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-
-#ifndef _TYPEDEFS_H_
-typedef unsigned char   uint8;
-typedef unsigned short  uint16;
-typedef unsigned long   uint32;
-typedef signed char     int8;
-typedef signed short    int16;
-typedef signed long     int32;
-#endif
-
-typedef unsigned char   byte;
-// typedef unsigned long   sem_t;
-
-typedef unsigned long   HANDLE,*PULONG,DWORD,*PDWORD;
-typedef signed long     LONG,*PLONG;
-
-typedef unsigned int    *PUINT;
-typedef signed int      INT;
-
-typedef unsigned short  *PUSHORT;
-typedef signed short    SHORT,*PSHORT;
-typedef unsigned short  WORD,*PWORD;
-
-typedef unsigned char   *PUCHAR;
-typedef signed char     *PCHAR;
-
-typedef void            *PVOID;
-
-typedef unsigned char   BOOLEAN, *PBOOL, *PBOOLEAN;
-
-typedef unsigned char   BYTE,*PBYTE;
-
-//#ifndef __GNUC__
-//The following has been defined in Vxworks internally: vxTypesOld.h
-//redefine under vxworks will cause error
-typedef signed int      *PINT;
-
-typedef signed char     INT8;
-typedef signed short    INT16;
-typedef signed long     INT32;
-
-typedef unsigned char   UINT8;
-typedef unsigned short  UINT16;
-typedef unsigned long   UINT32;
-
-typedef unsigned char   UCHAR;
-typedef unsigned short  USHORT;
-typedef unsigned int    UINT;
-typedef unsigned long   ULONG;
-
-typedef void            VOID;
-typedef unsigned char   BOOL;
-
-//#endif  /* __GNUC__ */
-
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-#ifndef TYPEDEFS_H
-
-// Maximum and minimum values for a signed 16 bit integer.
-#define MAX_INT16 32767
-#define MIN_INT16 -32768
-
-// Useful for true/false return values.  This uses the
-// Taligent notation (k for constant).
-typedef enum
-{
-    kFalse = 0,
-    kTrue = 1
-} Bool;
-
-#endif
-
-/* macros to protect against unaligned accesses */
-
-#if 0
-/* first arg is an address, second is a value */
-#define PUT16( a, d ) { 		\
-  *((byte *)a) = (byte)((d)>>8); 	\
-  *(((byte *)a)+1) = (byte)(d); 	\
-}
-
-#define PUT32( a, d ) { 		\
-  *((byte *)a) = (byte)((d)>>24); 	\
-  *(((byte *)a)+1) = (byte)((d)>>16); 	\
-  *(((byte *)a)+2) = (byte)((d)>>8); 	\
-  *(((byte *)a)+3) = (byte)(d); 	\
-}
-
-/* first arg is an address, returns a value */
-#define GET16( a ) ( 			\
-  (*((byte *)a) << 8) |			\
-  (*(((byte *)a)+1))	 		\
-)
-
-#define GET32( a ) ( 			\
-  (*((byte *)a) << 24)     |		\
-  (*(((byte *)a)+1) << 16) | 		\
-  (*(((byte *)a)+2) << 8)  | 		\
-  (*(((byte *)a)+3))	 		\
-)
-#endif
-
-#ifndef YES
-#define YES 1
-#endif
-
-#ifndef NO
-#define NO  0
-#endif
-
-#ifndef IN
-#define IN
-#endif
-
-#ifndef OUT
-#define OUT
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE  0
-#endif
-
-#define READ32(addr)        (*(volatile UINT32 *)((ULONG)&addr))
-#define READ16(addr)        (*(volatile UINT16 *)((ULONG)&addr))
-#define READ8(addr)         (*(volatile UINT8  *)((ULONG)&addr))
-
-#endif
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h
deleted file mode 100644
index e674cb10d7..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/***********************************************************************/
-/*                                                                     */
-/*   MODULE:  board.h                                                  */
-/*   DATE:    97/02/18                                                 */
-/*   PURPOSE: Board specific information.  This module should include  */
-/*            all base device addresses and board specific macros.     */
-/*                                                                     */
-/***********************************************************************/
-#ifndef _BOARD_H
-#define _BOARD_H
-
-/*****************************************************************************/
-/*                    Misc board definitions                                 */
-/*****************************************************************************/
-
-#define	DYING_GASP_API
-
-/*****************************************************************************/
-/*                    Physical Memory Map                                    */
-/*****************************************************************************/
-
-#define PHYS_DRAM_BASE           0x00000000     /* Dynamic RAM Base */
-#define PHYS_FLASH_BASE          0x1FC00000     /* Flash Memory         */
-
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs    */
-/* have to use converted addresses defined below:                            */
-/*****************************************************************************/
-#define DRAM_BASE           (0x80000000 | PHYS_DRAM_BASE)   /* cached DRAM */
-#define DRAM_BASE_NOCACHE   (0xA0000000 | PHYS_DRAM_BASE)   /* uncached DRAM */
-#define FLASH_BASE          (0xA0000000 | PHYS_FLASH_BASE)  /* uncached Flash  */
-
-/*****************************************************************************/
-/*  Select the PLL value to get the desired CPU clock frequency.             */
-/*                                                                           */
-/*                                                                           */
-/*****************************************************************************/
-#define FPERIPH            50000000
-
-#define ONEK                            1024
-#define BLK64K                          (64*ONEK)
-#define FLASH45_BLKS_BOOT_ROM           1
-#define FLASH45_LENGTH_BOOT_ROM         (FLASH45_BLKS_BOOT_ROM * BLK64K)
-#define FLASH_RESERVED_AT_END           (64*ONEK) /*reserved for PSI, scratch pad*/
-    
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs    */
-/* have to use converted addresses defined below:                            */
-/*****************************************************************************/
-#define DRAM_BASE           (0x80000000 | PHYS_DRAM_BASE)   /* cached DRAM */
-#define DRAM_BASE_NOCACHE   (0xA0000000 | PHYS_DRAM_BASE)   /* uncached DRAM */
-#define FLASH_BASE          (0xA0000000 | PHYS_FLASH_BASE)  /* uncached Flash  */
-
-/*****************************************************************************/
-/*  Select the PLL value to get the desired CPU clock frequency.             */
-/*                                                                           */
-/*                                                                           */
-/*****************************************************************************/
-#define FPERIPH            50000000
-    
-#define SDRAM_TYPE_ADDRESS_OFFSET   16
-#define NVRAM_DATA_OFFSET           0x0580
-#define NVRAM_DATA_ID               0x0f1e2d3c
-#define BOARD_SDRAM_TYPE            *(unsigned long *) \
-                                    (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
-
-#define ONEK                1024
-#define BLK64K              (64*ONEK)
-
-// nvram and psi flash definitions for 45
-#define FLASH45_LENGTH_NVRAM            ONEK            // 1k nvram 
-#define NVRAM_PSI_DEFAULT               24              // default psi in K byes
-
-/*****************************************************************************/
-/*       NVRAM Offset and definition                                         */
-/*****************************************************************************/
-
-#define NVRAM_VERSION_NUMBER            2
-#define NVRAM_VERSION_NUMBER_ADDRESS    0
-
-#define NVRAM_BOOTLINE_LEN              256
-#define NVRAM_BOARD_ID_STRING_LEN       16
-#define NVRAM_MAC_ADDRESS_LEN           6
-#define NVRAM_MAC_COUNT_MAX             32
-
-/*****************************************************************************/
-/*       Misc Offsets                                                        */
-/*****************************************************************************/
-
-#define CFE_VERSION_OFFSET           0x0570
-#define CFE_VERSION_MARK_SIZE        5
-#define CFE_VERSION_SIZE             5
-
-typedef struct
-{
-    unsigned long ulVersion;
-    char szBootline[NVRAM_BOOTLINE_LEN];
-    char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
-    unsigned long ulReserved1[2];
-    unsigned long ulNumMacAddrs;
-    unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-    char chReserved[2];
-    unsigned long ulCheckSum;
-} NVRAM_DATA, *PNVRAM_DATA;
-
-
-/*****************************************************************************/
-/*          board ioctl calls for flash, led and some other utilities        */
-/*****************************************************************************/
-
-
-/* Defines. for board driver */
-#define BOARD_IOCTL_MAGIC       'B'
-#define BOARD_DRV_MAJOR          206
-
-#define MAC_ADDRESS_ANY         (unsigned long) -1
-
-#define BOARD_IOCTL_FLASH_INIT \
-    _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_WRITE \
-    _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_READ \
-    _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NR_PAGES \
-    _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_DUMP_ADDR \
-    _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MEMORY \
-    _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_MIPS_SOFT_RESET \
-    _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_LED_CTRL \
-    _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ID \
-    _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_PSI_SIZE \
-    _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_SDRAM_SIZE \
-    _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MONITOR_FD \
-    _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
-    
-#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
-    _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BOOTLINE \
-    _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_BOOTLINE \
-    _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CHIP_ID \
-    _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NUM_ENET \
-    _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CFE_VER \
-    _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ENET_CFG \
-    _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
-    _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
-    
-#define BOARD_IOCTL_SET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)        
-
-#define BOARD_IOCTL_GET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)        
-
-#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) 
-
-#define BOARD_IOCTL_SET_SES_LED \
-    _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-#define RESET_BUTTON_UP           1
-#define RESET_BUTTON_PRESSDOWN    0
-#define BOARD_IOCTL_GET_RESETHOLD \
-    _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
-//>>JUNHON, 2004/09/15    
-    
-// for the action in BOARD_IOCTL_PARMS for flash operation
-typedef enum 
-{
-    PERSISTENT,
-    NVRAM,
-    BCM_IMAGE_CFE,
-    BCM_IMAGE_FS,
-    BCM_IMAGE_KERNEL,
-    BCM_IMAGE_WHOLE,
-    SCRATCH_PAD,
-    FLASH_SIZE,
-} BOARD_IOCTL_ACTION;
-    
-    
-typedef struct boardIoctParms
-{
-    char *string;
-    char *buf;
-    int strLen;
-    int offset;
-    BOARD_IOCTL_ACTION  action;        /* flash read/write: nvram, persistent, bcm image */
-    int result;
-} BOARD_IOCTL_PARMS;
-
-
-// LED defines 
-typedef enum
-{   
-    kLedAdsl,
-    kLedWireless,
-    kLedUsb,
-    kLedHpna,
-    kLedWanData,
-    kLedPPP,
-    kLedVoip,
-    kLedSes,
-    kLedLan,
-    kLedSelfTest,
-    kLedEnd,                // NOTE: Insert the new led name before this one.  Alway stay at the end.
-} BOARD_LED_NAME;
-
-typedef enum
-{
-    kLedStateOff,                        /* turn led off */
-    kLedStateOn,                         /* turn led on */
-    kLedStateFail,                       /* turn led on red */
-    kLedStateBlinkOnce,                  /* blink once, ~100ms and ignore the same call during the 100ms period */
-    kLedStateSlowBlinkContinues,         /* slow blink continues at ~600ms interval */
-    kLedStateFastBlinkContinues,         /* fast blink continues at ~200ms interval */
-} BOARD_LED_STATE;
-
-
-// virtual and physical map pair defined in board.c
-typedef struct ledmappair
-{
-    BOARD_LED_NAME ledName;         // virtual led name
-    BOARD_LED_STATE ledInitState;   // initial led state when the board boots.
-    unsigned short ledMask;         // physical GPIO pin mask
-    unsigned short ledActiveLow;    // reset bit to turn on LED
-    unsigned short ledMaskFail;     // physical GPIO pin mask for state failure
-    unsigned short ledActiveLowFail;// reset bit to turn on LED
-} LED_MAP_PAIR, *PLED_MAP_PAIR;
-
-typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
-
-/* Flash storage address information that is determined by the flash driver. */
-typedef struct flashaddrinfo
-{
-    int flash_persistent_start_blk;
-    int flash_persistent_number_blk;
-    int flash_persistent_length;
-    unsigned long flash_persistent_blk_offset;
-    int flash_scratch_pad_start_blk;         // start before psi (SP_BUF_LEN)
-    int flash_scratch_pad_number_blk;
-    int flash_scratch_pad_length;
-    unsigned long flash_scratch_pad_blk_offset;
-    int flash_nvram_start_blk;
-    int flash_nvram_number_blk;
-    int flash_nvram_length;
-    unsigned long flash_nvram_blk_offset;
-} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
-
-// scratch pad defines
-/* SP - Persisten Scratch Pad format:
-       sp header        : 32 bytes
-       tokenId-1        : 8 bytes
-       tokenId-1 len    : 4 bytes
-       tokenId-1 data    
-       ....
-       tokenId-n        : 8 bytes
-       tokenId-n len    : 4 bytes
-       tokenId-n data    
-*/
-
-#define MAGIC_NUM_LEN       8
-#define MAGIC_NUMBER        "gOGoBrCm"
-#define TOKEN_NAME_LEN      16
-#define SP_VERSION          1
-#define SP_MAX_LEN          8 * 1024            // 8k buf before psi
-#define SP_RESERVERD        16
-
-typedef struct _SP_HEADER
-{
-    char SPMagicNum[MAGIC_NUM_LEN];             // 8 bytes of magic number
-    int SPVersion;                              // version number
-    int SPUsedLen;                              // used sp len   
-    char SPReserved[SP_RESERVERD];              // reservied, total 32 bytes
-} SP_HEADER, *PSP_HEADER;
-
-typedef struct _TOKEN_DEF
-{
-    char tokenName[TOKEN_NAME_LEN];
-    int tokenLen;
-} SP_TOKEN, *PSP_TOKEN;
-
-
-/*****************************************************************************/
-/*          Function Prototypes                                              */
-/*****************************************************************************/
-#if !defined(__ASM_ASM_H)
-void dumpaddr( unsigned char *pAddr, int nLen );
-
-int kerSysNvRamGet(char *string, int strLen, int offset);
-int kerSysNvRamSet(char *string, int strLen, int offset);
-int kerSysPersistentGet(char *string, int strLen, int offset);
-int kerSysPersistentSet(char *string, int strLen, int offset);
-int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
-int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
-int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
-int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
-int kerSysReleaseMacAddress( unsigned char *pucaAddr );
-int kerSysGetSdramSize( void );
-void kerSysGetBootline(char *string, int strLen);
-void kerSysSetBootline(char *string, int strLen);
-void kerSysMipsSoftReset(void);
-void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
-int kerSysFlashSizeGet(void);
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
-void kerSysDeregisterDyingGaspHandler(char *devname);    
-void kerSysWakeupMonitorTask( void );
-#endif
-
-#define BOOT_CFE     0
-#define BOOT_REDBOOT 1
-
-extern int boot_loader_type;
-
-#endif /* _BOARD_H */
-
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h
deleted file mode 100644
index e169bb00c0..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
-
-#define BOOT_LOADER_UNKNOWN 	0
-#define BOOT_LOADER_CFE 	1
-#define BOOT_LOADER_REDBOOT 	2
-#define BOOT_LOADER_CFE2	3
-#define BOOT_LOADER_LAST 	3
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
deleted file mode 100644
index ea9b3587ad..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_tlb                    	1
-#define cpu_has_4kex                   	4
-#define cpu_has_4ktlb                  	8
-#define cpu_has_fpu                    	0
-#define cpu_has_32fpr                  	0
-#define cpu_has_counter			0x40
-#define cpu_has_watch                  	0
-#define cpu_has_mips16                 	0
-#define cpu_has_divec                  	0x200
-#define cpu_has_vce                    	0
-#define cpu_has_cache_cdex_p           	0
-#define cpu_has_cache_cdex_s           	0
-#define cpu_has_prefetch               	0x40000
-#define cpu_has_mcheck                 	0x2000
-#define cpu_has_ejtag                  	0x4000
-#define cpu_has_llsc                   	0x10000
-#define cpu_has_vtag_icache            	0
-#define cpu_has_dc_aliases             	0
-#define cpu_has_ic_fills_f_dc          	0
-
-#define cpu_has_nofpuex               	0
-#define cpu_has_64bits                 	0
-#define cpu_has_64bit_zero_reg         	0
-#define cpu_has_64bit_gp_regs          	0
-#define cpu_has_64bit_addresses        	0
-
-#define cpu_has_subset_pcaches         	0
-
-#define cpu_dcache_line_size()         	16
-#define cpu_icache_line_size()         	16
-#define cpu_scache_line_size()         	0
-
-#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h
deleted file mode 100644
index 0f09a31e67..0000000000
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_BCM963XX_WAR_H
-#define __ASM_MIPS_MACH_BCM963XX_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
-#define ICACHE_REFILLS_WORKAROUND_WAR	0
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_BCM963XX_WAR_H */
diff --git a/target/linux/brcm63xx/files/include/linux/atmrt2684.h b/target/linux/brcm63xx/files/include/linux/atmrt2684.h
deleted file mode 100644
index f138c643a2..0000000000
--- a/target/linux/brcm63xx/files/include/linux/atmrt2684.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LINUX_ATMRT2684_H
-#define _LINUX_ATMRT2684_H
-
-#include <linux/atm.h>
-#include <linux/if.h>		/* For IFNAMSIZ */
-
-#define RT2684_ENCAPS_NULL	(0)	/* VC-mux */
-#define RT2684_ENCAPS_LLC	(1)
-#define RT2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
-
-/*
- * This is for the ATM_NEWBACKENDIF call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_newif_rt2684 {
-	atm_backend_t	backend_num;	/* ATM_BACKEND_RT2684 */
-	char		ifname[IFNAMSIZ];
-};
-
-/*
- * This structure is used to specify a rt2684 interface - either by a
- * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
- */
-#define RT2684_FIND_BYNOTHING	(0)
-#define RT2684_FIND_BYNUM	(1)
-#define RT2684_FIND_BYIFNAME	(2)
-struct rt2684_if_spec {
-	int method;			/* RT2684_FIND_* */
-	union {
-		char		ifname[IFNAMSIZ];
-		int		devnum;
-	} spec;
-};
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_rt2684 {
-	atm_backend_t	backend_num;	/* ATM_BACKEND_RT2684 */
-	struct rt2684_if_spec ifspec;
-	unsigned char	encaps;		/* RT2684_ENCAPS_* */
-};
-
-
-#endif /* _LINUX_ATMRT2684_H */