brcm63xx: add initial support for Netgear EVG2000

This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather <xotic750@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 103 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/dts/evg2000.dts b/target/linux/brcm63xx/dts/evg2000.dts
new file mode 100644
index 0000000000..cf324b2c5d
--- /dev/null
+++ b/target/linux/brcm63xx/dts/evg2000.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear EVG2000";
+	compatible = "netgear,evg2000", "brcm,bcm6368";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		debounce-interval = <60>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 25 1>;
+			linux,code = <KEY_RESTART>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 26 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		voip1_green {
+			label = "EVG2000:green:voip1";
+			gpios = <&gpio0 14 1>;
+		};
+		voip2_green {
+			label = "EVG2000:green:voip2";
+			gpios = <&gpio0 2 1>;
+		};
+		inet_red {
+			label = "EVG2000:red:inet";
+			gpios = <&gpio0 4 1>;
+		};
+		inet_green {
+			label = "EVG2000:green:inet";
+			gpios = <&gpio0 5 1>;
+		};
+		usb_green {
+			label = "EVG2000:green:usb";
+			gpios = <&gpio0 15 1>;
+		};
+		power_green {
+			label = "EVG2000:green:power";
+			gpios = <&gpio0 22 1>;
+			default-state = "on";
+		};
+		power_red {
+			label = "EVG2000:red:power";
+			gpios = <&gpio0 23 1>;
+		};
+		lan_green {
+			label = "EVG2000:green:lan";
+			gpios = <&gpio0 24 1>;
+		};
+		wireless_green {
+			label = "EVG2000:green:wireless";
+			gpios = <&gpio0 26 1>;
+		};
+		wan_green {
+			label = "EVG2000:green:wan";
+			gpios = <&gpio0 27 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	linux,part-probe = "bcm63xxpart";
+
+	cfe@0 {
+		label = "CFE";
+		reg = <0x00000000 0x00020000>;
+		read-only;
+	};
+
+	linux@20000 {
+		label = "linux";
+		reg = <0x00020000 0x00f40000>;
+	};
+
+	board_data@f60000 {
+		label = "board_data";
+		reg = <0x00f60000 0x00080000>;
+		read-only;
+	};
+
+	nvram@fe0000 {
+		label = "nvram";
+		reg = <0x00fe0000 0x00020000>;
+	};
+};