brcm63xx: be more specific about SOC names

This uses the specific SOC names for several devices where the
Chip ID was used incorrectly before.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 100 deletions

diff --git a/target/linux/brcm63xx/dts/bcm6362-sfr-neufbox-6-sercomm-r0.dts b/target/linux/brcm63xx/dts/bcm6362-sfr-neufbox-6-sercomm-r0.dts
deleted file mode 100644
index 031aff0748..0000000000
--- a/target/linux/brcm63xx/dts/bcm6362-sfr-neufbox-6-sercomm-r0.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-/dts-v1/;
-
-#include "bcm6362.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "SFR Neufbox 6 (Sercomm)";
-	compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6362";
-
-	chosen {
-		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		service {
-			label = "service";
-			gpios = <&pinctrl 10 1>;
-			linux,code = <BTN_0>;
-			debounce-interval = <60>;
-		};
-
-		wlan {
-			label = "wlan";
-			gpios = <&pinctrl 12 1>;
-			linux,code = <KEY_WLAN>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&pinctrl 24 1>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&pinctrl 25 1>;
-			linux,code = <KEY_WPS_BUTTON>;
-			debounce-interval = <60>;
-		};
-	};
-
-	switch {
-		compatible = "realtek,rtl8367";
-		gpio-sda = <&pinctrl 18 0>;
-		gpio-sck = <&pinctrl 20 0>;
-
-		realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
-	};
-};
-
-&hsspi {
-	status = "ok";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		reg = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			cfe@0 {
-				reg = <0x000000 0x010000>;
-				label = "cfe";
-				read-only;
-			};
-
-			linux@10000 {
-				reg = <0x010000 0xfe0000>;
-				label = "linux";
-				compatible = "brcm,bcm963xx-imagetag";
-			};
-
-			nvram@ff0000 {
-				reg = <0xff0000 0x010000>;
-				label = "nvram";
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "ok";
-};